EQLIPADDR-MIB
AI MIB Summary
The EQLIPADDR-MIB facilitates the monitoring and management of IP address configurations within Dell EqualLogic storage arrays by exposing the array's IP address table. This module enables network administrators to track specific interface IP assignments, subnets, and gateway settings for storage network connectivity verification.
Equallogic Inc. Storage Array IP address table mib
Copyright (c) 2002-2010 by Dell, Inc.
All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell, Inc. This software embodies proprietary information and trade secrets of Dell, Inc.
Main OID:
eqlipaddrModule.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9
33
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
33 total| Object Name |
|---|
eqlipaddrModuleEquallogic Inc. Storage Array IP address table mib
Copyright (c) 2002-2010 by Dell, Inc.
All rights reserved. This software may not be copied, disclosed,
transferred, or used except in accordance with a license granted
by Dell, Inc. This software embodies proprietary information
and trade secrets of Dell, Inc. MODULE-IDENTITY .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9 |
eqlipAddrTableEqualLogic-Dynamic Storage Volume Table.
The table of addressing information relevant to
this entity's IP addresses.deprecated SEQUENCE OF EqlipAddrEntry .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.1 |
eqlipAddrEntryThe addressing information for one of this
entity's IP addresses. EqlipAddrEntry .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.1.1 |
eqlIpAdEntAddrThe IP address to which this entry's addressing
information pertains. IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.1.1.1 |
eqlIpAdEntIfNameThe interface name for which this entry's addressing
information pertains.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.1.1.2 |
eqlIpAdEntNetMaskThe subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.1.1.3 |
eqlIpAdEntIfIndexThe interface index for which this entry's addressing
information pertains.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.1.1.4 |
eqlIpAdEntRowStatusThe status of this conceptual row.
Until instances of all read-create columns are
appropriately configured, the value of the
corresponding instance of the eqlIpRowStatus column
is 'notReady'.
The RowStatus TC [RFC1903] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.1.1.5 |
eqlifTableEqualLogic-Persistent Interfaces Table.
The table of information relevant to
this entity's physical interfaces. SEQUENCE OF EqlifEntry .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.2 |
eqlifEntry EqlifEntry .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.2.1 |
eqlifDescrThis field provides a writable area for a manager to
enter user specific data pertaining to the interface
referred by this instance of ifIndexrw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.2.1.1 |
eqlifPortAttrThis field specifies the mode of the specified port as follows:rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.2.1.2 |
eqlifAdminStatusThe desired state of the interface. The
testing(3) state indicates that no operational
packets can be passed.
This column is used to maintain the desired state of the
interface accross reboots. The value of this object MUST
always be equal to ifAdminStatus defined in rfc1213 mib.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.2.1.3 |
eqlifRoleThe desired role of the interface. By default the interface will allow
iscsi only traffic. when set to mgmt-only, only management traffic
will be allowed. (There is not a both at this time)rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.2.1.4 |
eqlWKATableEqualLogic-Persistent WKA Table. This table maintains the list of
well known ipaddresses (WKA) in the group. SEQUENCE OF EqlWKAEntry .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.3 |
eqlWKAEntryAn entry (row) containing storage group WKA information. EqlWKAEntry .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.3.1 |
eqlWKARowStatusThe status of this conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.3.1.1 |
eqlWKARoleThe role of this WKA. Management WKA is used for only management traffic. secondary WKA can be used incase the
of failover to secondary site and secondary site wants to use primary site's WKA. Secondary WKAs can exist
independent of partner records and their ipaddresses.rw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.3.1.2 |
eqlifStatusTableEqualLogic-Dynamic Interface Table.
This table contains WKA information about the interfaces. SEQUENCE OF EqlifStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.4 |
eqlifStatusEntryAn entry (row) containing Interface WKA information. EqlifStatusEntry .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.4.1 |
eqlifStatusMgmtRolePolicyThis field is for specifying the policy of this interface, i.e whether this interface can be used for mgmt-only role.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.4.1.1 |
eqlifStatusConfigurationFlagsThis fields defines the common place holder for ethernet interface
configuration flags. The flags must be of type
enable(1) or disable(0), and the default will always be disable(0).ro Bits .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.4.1.2 |
eqlifOperStatusThe current operational state of the interface. The
testing(3) state indicates that no operational packets
can be passed. If eqlifAdminStatus is down(2) then
eqlifOperStatus should be down(2). If eqlifAdminStatus is
changed to up(1) then eqlifOperStatus should change to
up(1) if the interface is ready to transmit and
receive network traffic; it should change to
dormant(5) if the interface is waiting for external
actions (such as a serial line waiting for an
incomming connection); it should remain in the down(2)
state if and only if there is a fault that prevents if
from going to the up(1) state.ro Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.4.1.3 |
eqlinetAddrTableEqualLogic-Persistent Storage Volume Table.
The table of addressing information relevant to
this entity's IP addresses. SEQUENCE OF EqlinetAddrEntry .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.5 |
eqlinetAddrEntryThe addressing information for one of this
entity's IP addresses. EqlinetAddrEntry .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.5.1 |
eqlInetAddrEntAddrTypeThe IP address to which this entry's addressing
information pertains. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.5.1.1 |
eqlInetAddrEntAddrThe IP address to which this entry's addressing
information pertains. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.5.1.2 |
eqlInetAddrEntIfNameThe interface name for which this entry's addressing
information pertains.rw DisplayString .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.5.1.3 |
eqlInetAddrEntNetMaskTypeThe subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.5.1.4 |
eqlInetAddrEntNetMaskThe subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the hosts bits set to 0.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.5.1.5 |
eqlInetAddrEntIfIndexThe interface index for which this entry's addressing
information pertains.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.5.1.6 |
eqlInetAddrEntFlagsThis specifies specific flags for the address.
Currently the only flag that can be set is static (1),
which means the address has been statically
configured by the administratorrw Enumeration .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.5.1.7 |
eqlInetAddrEntRowStatusThe status of this conceptual row.
Until instances of all read-create columns are
appropriately configured, the value of the
corresponding instance of the eqlIpRowStatus column
is 'notReady'.
The RowStatus TC [RFC1903] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:
The value of this object has no effect on whether
other objects in this conceptual row can be modified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.9.5.1.8 |
More MIBs from Proteon
Browse all ProteonMIBs →LCOS-MIB
SNMP MIB module
8897 objects→
LANCOM-1711-PLUS-MIB
The LANCOM-1711-PLUS-MIB provides the management information base definitions required for SNMP-based monitoring and configuration of the LANCOM 1711 PLUS router, enabling the retrieval of device-specific operational metrics such as interface statistics, system health indicators, and routing table states.
4467 objects→
LANCOM-1722-MIB
The LANCOM-1722-MIB module enables SNMP-based monitoring and management of the LANCOM 1722 VoIP gateway, specifically exposing Annex B-defined metrics for voice session states, call quality parameters, and telephony interface statistics.
3546 objects→
LANCOM-1721-MIB
The LANCOM-1721-MIB module provides SNMP management capabilities for the LANCOM 1721 VPN router, specifically exposing metrics defined in Annex B to monitor VPN tunnel states, security associations, and interface statistics. This module enables network administrators to track connection status, throughput counters, and error conditions for the device's integrated VPN functionality.
3340 objects→
LANCOM-1711-MIB
The LANCOM-1711-MIB module enables monitoring and management of VPN tunnel states, cryptographic session statistics, and interface parameters specifically for LANCOM 1711+ series routers. It provides access to counters for IPsec and PPTP tunnel establishment failures, throughput metrics, and device health indicators required for maintaining secure WAN connectivity on this hardware platform.
2979 objects→
LCOS-SX-MIB
The LCOS-SX-MIB module provides SNMP management definitions for Brocade (now Broadcom) LCOS SX switches, enabling the monitoring of Layer 2 Ethernet switch metrics including port status, traffic counters, error statistics, and spanning tree states.
2459 objects→