EQL-DCB-MIB
Data Center Bridging MIB module. Copyright (c) 2010-2011 by Dell, Inc.
All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell, Inc. This software embodies proprietary information and trade secrets of Dell, Inc.
Copyright (C) IEEE (2009). This version of this MIB module is published as clause 17.7 of IEEE Std 802.1Qaz; see the standard itself for full legal notices.
Main OID:
eqlDcbMib.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19
224
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
224 total| Object Name |
|---|
eqlDcbMibData Center Bridging MIB module.
Copyright (c) 2010-2011 by Dell, Inc.
All rights reserved. This software may not be copied, disclosed,
transferred, or used except in accordance with a license granted
by Dell, Inc. This software embodies proprietary information
and trade secrets of Dell, Inc.
Copyright (C) IEEE (2009). This version of this MIB module
is published as clause 17.7 of IEEE Std 802.1Qaz;
see the standard itself for full legal notices. MODULE-IDENTITY .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19 |
eqlDcbMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1 |
eqlDcbStaticIfTableEqualLogic-Persistent
A table of DCB information per each interface of a system.
Each row in this table supplies values for one port's
DCB parameters. SEQUENCE OF EqlDcbStaticIfEntry .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1 |
eqlDcbStaticIfEntryAn entry in the DCB table, containing information
about DCB on a single interface. EqlDcbStaticIfEntry .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1 |
eqlDcbxConfigTCSupportedTxEnableThis field is deprecated.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.1 |
eqlDcbxConfigETSConfigurationTxEnableThe eqlDcbxConfigETSConfigurationTxEnable, which is
defined as a truth value and configured by the network
management, determines whether the IEEE 802.1 organizationally
defined ETS Configuration TLV transmission is allowed on a
given LLDP transmission capable port.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.2 |
eqlDcbxConfigETSRecommendationTxEnableThe eqlDcbxConfigETSRecommendationTxEnable, which is
defined as a truth value and configured by the network
management, determines whether the IEEE 802.1 organizationally
defined ETS Recommendation TLV transmission is allowed on a
given LLDP transmission capable port.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.3 |
eqlDcbxConfigPFCTxEnableThe eqlDcbxConfigPFCTxEnable, which is defined
as a truth value and configured by the network management,
determines whether the IEEE 802.1 organizationally defined
Priority-based Flow Fontrol TLV transmission is allowed on
a given LLDP transmission capable port.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.4 |
eqlDcbxConfigAppPriorityTxEnableThe eqlDcbxConfigAppPriorityTxEnable, which
is defined as a truth value and configured by the network
management, determines whether the IEEE 802.1 organizationally
defined Application Priority TLV transmission is allowed on
a given LLDP transmission capable port.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.5 |
eqlDcbxConfigQcnTxEnableThe eqlDcbxConfigQcnTxEnable, which is defined
as a truth value and configured by the network management,
determines whether the IEEE 802.1 organizationally defined
Quantitized Congestion Notification TLV transmission is allowed on
a given LLDP transmission capable port.
The value of this object is restored from non-volatile
storage after a re-initialization of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.6 |
eqlDcbxAdminTCSupportedThis field is deprecated.rwdeprecated EqlDcbxSupportedCapacity .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.7 |
eqlDcbxAdminETSConMaxTCGIndicates the number of Traffic Class Groups supported on the
remote system. A value of 0 indicates that 8 Traffic Class
Groups are supported.rw EqlDcbxSupportedCapacity .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.8 |
eqlDcbxAdminETSConWillingIndicates if the local system is willing to accept the
ETS configuration recommended by the remote system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.9 |
eqlDcbxAdminETSConTrafficClassGroupBandwidthTableEach octet corresponds to one traffic class group. The first
octet corresponds to traffic class group 0, the second to
traffic class group 1, and so on. Each octet contains the
bandwidth in percent to be allocated to the traffic class
group. Valid values are between 0 and 100 inclusive. The
total of all eight octets must equal 100.
Note that an octet string is used instead of a table to enable
atomic programming of these values which is required to fulfill
the requirement that they always total to 100.rw OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.10 |
eqlDcbxAdminETSRecoTrafficClassGroupBandwidthTableEach octet corresponds to one traffic class group. The first
octet corresponds to traffic class group 0, the second to
traffic class group 1, and so on. Each octet contains the
bandwidth in percent that the remote station is recommending to
be allocated to the traffic class group. Valid values are
between 0 and 100 inclusive. The total of all eight octets must
equal 100.
Note that an octet string is used instead of a table to enable
atomic programming of these values which is required to fulfill
the requirement that they always total to 100.rw OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.11 |
eqlDcbxAdminPFCWillingIndicates if the local system is willing to accept the
PFC configuration of the remote system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.12 |
eqlDcbxAdminPFCMBCIndicates if the local system is capable of bypassing
MACSEC processing when MACSEC is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.13 |
eqlDcbxAdminPFCCapIndicates the number of traffic classes on the local device
that may simultaneously have PFC enabled.rw EqlDcbxSupportedCapacity .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.14 |
eqlDcbxAdminAppPriorityWillingIndicates if the local system is willing to accept the
Application Priority configuration of the remote system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.15 |
eqlDcbxConfigAutoDetectVLANEnableEnable automatic detection of VLAN ID.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.16 |
eqlDcbxConfigVLANIdVLAN ID to use for DCB.rw EqlVlanIdentifier .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.17 |
eqlDcbxAdminETSConTrafficClassGroupPri0Indicates the traffic class group to which priority 0 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.18 |
eqlDcbxAdminETSConTrafficClassGroupPri1Indicates the traffic class group to which priority 1 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.19 |
eqlDcbxAdminETSConTrafficClassGroupPri2Indicates the traffic class group to which priority 2 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.20 |
eqlDcbxAdminETSConTrafficClassGroupPri3Indicates the traffic class group to which priority 3 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.21 |
eqlDcbxAdminETSConTrafficClassGroupPri4Indicates the traffic class group to which priority 4 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.22 |
eqlDcbxAdminETSConTrafficClassGroupPri5Indicates the traffic class group to which priority 5 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.23 |
eqlDcbxAdminETSConTrafficClassGroupPri6Indicates the traffic class group to which priority 6 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.24 |
eqlDcbxAdminETSConTrafficClassGroupPri7Indicates the traffic class group to which priority 7 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.25 |
eqlDcbxAdminPFCEnableEnabledPri0Indicates if PFC is enabled on priority 0rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.26 |
eqlDcbxAdminPFCEnableEnabledPri1Indicates if PFC is enabled on priority 1rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.27 |
eqlDcbxAdminPFCEnableEnabledPri2Indicates if PFC is enabled on priority 2rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.28 |
eqlDcbxAdminPFCEnableEnabledPri3Indicates if PFC is enabled on priority 3rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.29 |
eqlDcbxAdminPFCEnableEnabledPri4Indicates if PFC is enabled on priority 4rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.30 |
eqlDcbxAdminPFCEnableEnabledPri5Indicates if PFC is enabled on priority 5rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.31 |
eqlDcbxAdminPFCEnableEnabledPri6Indicates if PFC is enabled on priority 6rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.32 |
eqlDcbxAdminPFCEnableEnabledPri7Indicates if PFC is enabled on priority 7rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.33 |
eqlDcbxAdminAppPriorityiSCSITxEnableIndicates whether or not the iSCSI application priority
entry is transmitted as part ot the Application Priority
TLV.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.34 |
eqlDcbxAdminAppPriorityiSCSIProtocolThe protocol indicator used for iSCSI in the Application
Priority TLV.rw EqlDcbxAppProtocol .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.35 |
eqlDcbxAdminAppPriorityiSCSIPriorityThe priority value used for iSCSI in the Application
Priority TLV.rw EqlIEEE8021PriorityValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.36 |
eqlDcbxAdminAppPriorityFCoETxEnableIndicates whether or not the FCoE application priority
entry is transmitted as part ot the Application Priority
TLV.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.37 |
eqlDcbxAdminAppPriorityFCoEProtocolThe protocol indicator used for FCoE in the Application
Priority TLV.rw EqlDcbxAppProtocol .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.38 |
eqlDcbxAdminAppPriorityFCoEPriorityThe priority value used for FCoE in the Application
Priority TLV.rw EqlIEEE8021PriorityValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.39 |
eqlDcbxConfigDCBEnableIndicates whether or not DCB is enabled for this interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.40 |
eqlDcbxConfigDCBX101EnableIndicates whether or not the transmit of DCBX 1.01 TLVs
is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.41 |
eqlDcbxConfigDCBXIEEEDraftEnableIndicates whether or not the transmit of DCBX IEEE 802.1Qaz draft
TLVs is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.42 |
eqlDcbxConfigQcnSubtypeThis field is deprecated.rwdeprecated EqlIEEEDraftSubtypeValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.43 |
eqlDcbxConfigETSConSubtypeThis field is deprecated.rwdeprecated EqlIEEEDraftSubtypeValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.44 |
eqlDcbxConfigETSRecoSubtypeThis field is deprecated.rwdeprecated EqlIEEEDraftSubtypeValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.45 |
eqlDcbxConfigPFCSubtypeThis field is deprecated.rwdeprecated EqlIEEEDraftSubtypeValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.46 |
eqlDcbxConfigAppPrioritySubtypeThis field is deprecated.rwdeprecated EqlIEEEDraftSubtypeValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.47 |
eqlDcbxConfigTCSupportedSubtypeThis field is deprecated.rwdeprecated EqlIEEEDraftSubtypeValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.48 |
eqlDcbxAdminETSRecoTrafficClassGroupPri0Indicates the traffic class group to which priority 0 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.49 |
eqlDcbxAdminETSRecoTrafficClassGroupPri1Indicates the traffic class group to which priority 1 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.50 |
eqlDcbxAdminETSRecoTrafficClassGroupPri2Indicates the traffic class group to which priority 2 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.51 |
eqlDcbxAdminETSRecoTrafficClassGroupPri3Indicates the traffic class group to which priority 3 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.52 |
eqlDcbxAdminETSRecoTrafficClassGroupPri4Indicates the traffic class group to which priority 4 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.53 |
eqlDcbxAdminETSRecoTrafficClassGroupPri5Indicates the traffic class group to which priority 5 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.54 |
eqlDcbxAdminETSRecoTrafficClassGroupPri6Indicates the traffic class group to which priority 6 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.55 |
eqlDcbxAdminETSRecoTrafficClassGroupPri7Indicates the traffic class group to which priority 7 is
to be assigned.rw EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.56 |
eqlDcbCnGlobalMasterEnableThe state of the congestion notification feature on this bridge
component or system. If true, Congestion notification is
enabled, and if false, congestion notification is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.57 |
eqlDcbCnRpPortPriMaxRpsAn integer controlling the maximum number of Reaction Points
allowed for this CNPV on this Port. An end station SHALL
not create more than this many Reaction Point on this Port,
but it MAY create fewer.rw Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.58 |
eqlDcbCnRpgEnablePri0Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for the RPs controlled by
this object are not held in the FALSE state,
thus enabling them to pay attention to received
CNMs.
false(2) The rpEnabled variable for the RPs controlled by
this object are held in the FALSE state, thus
disabling them from paying attention to received
CNMs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.59 |
eqlDcbCnRpgEnablePri1Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for the RPs controlled by
this object are not held in the FALSE state,
thus enabling them to pay attention to received
CNMs.
false(2) The rpEnabled variable for the RPs controlled by
this object are held in the FALSE state, thus
disabling them from paying attention to received
CNMs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.60 |
eqlDcbCnRpgEnablePri2Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for the RPs controlled by
this object are not held in the FALSE state,
thus enabling them to pay attention to received
CNMs.
false(2) The rpEnabled variable for the RPs controlled by
this object are held in the FALSE state, thus
disabling them from paying attention to received
CNMs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.61 |
eqlDcbCnRpgEnablePri3Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for the RPs controlled by
this object are not held in the FALSE state,
thus enabling them to pay attention to received
CNMs.
false(2) The rpEnabled variable for the RPs controlled by
this object are held in the FALSE state, thus
disabling them from paying attention to received
CNMs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.62 |
eqlDcbCnRpgEnablePri4Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for the RPs controlled by
this object are not held in the FALSE state,
thus enabling them to pay attention to received
CNMs.
false(2) The rpEnabled variable for the RPs controlled by
this object are held in the FALSE state, thus
disabling them from paying attention to received
CNMs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.63 |
eqlDcbCnRpgEnablePri5Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for the RPs controlled by
this object are not held in the FALSE state,
thus enabling them to pay attention to received
CNMs.
false(2) The rpEnabled variable for the RPs controlled by
this object are held in the FALSE state, thus
disabling them from paying attention to received
CNMs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.64 |
eqlDcbCnRpgEnablePri6Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for the RPs controlled by
this object are not held in the FALSE state,
thus enabling them to pay attention to received
CNMs.
false(2) The rpEnabled variable for the RPs controlled by
this object are held in the FALSE state, thus
disabling them from paying attention to received
CNMs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.65 |
eqlDcbCnRpgEnablePri7Controls the rpEnabled variable of the Reaction Point state
machines of the Reaction Points (RPs) controlled by this
entry as follows:
true(1) The rpEnabled variable for the RPs controlled by
this object are not held in the FALSE state,
thus enabling them to pay attention to received
CNMs.
false(2) The rpEnabled variable for the RPs controlled by
this object are held in the FALSE state, thus
disabling them from paying attention to received
CNMs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.66 |
eqlDcbCnRpgTimeResetThis object controls the value for all of the state machine
variables, rpgTimeReset, used to reset the timers RpWhile.rw TimeInterval UNITS "milliseconds" .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.67 |
eqlDcbCnRpgByteResetThis object controls the value for all of the state machine
variables, rpgByteReset, used to reset the counters
rpByteCount.rw Unsigned32 UNITS "octets" .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.68 |
eqlDcbCnRpgThresholdThis object controls the number of times rpByteStage or
rpTimeStage can count before the
RP rate control state machine advances states.rw Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.69 |
eqlDcbCnRpgMaxRateThis object controls the maximum rate, in multiples of 1 Mbit/s,
at which an RP can transmit. Default value is the speed of the
port. A system SHALL support a minimim value for this object
that is no larger than 5 Mbits/s (object value 5). This rate
includes all bits consequent to transmitting the frame on the
LAN, including preamble, inter-frame gap, etc.rw Unsigned32 UNITS "Mbit/s" .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.70 |
eqlDcbCnRpgAiRateThis object controls the transmission rate increment in the
RPR_ACTIVE_INCREASE state (rpgAiRate) in multiples of 1 Mbit/s.
This rate includes all bits consequent to transmitting the
frame on the LAN, including preamble, inter-frame gap, etc.rw Unsigned32 UNITS "Mbit/s" .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.71 |
eqlDcbCnRpgHaiRateThis object controls the transmission rate increment in the
RPR_HYPER_INCREASE state (rpgHaiRate) in multiples of 1 Mbit/s.
This rate includes all bits consequent to transmitting the
frame on the LAN, including preamble, inter-frame gap, etc.rw Unsigned32 UNITS "Mbit/s" .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.72 |
eqlDcbCnRpgGdThis object controls the number of bits that the value of the
Quantized Feedback field received in a CNM PDU is shifted to
the right to decrease rpTargetRate. rpgGd is thus 2 to the
negative power of this object, e.g., 7 means rpgGd = 1/128.rw Integer32 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.73 |
eqlDcbCnRpgMinDecFacThis object controls the minimum factor by which the current
RP transmit rate rpCurrentRate can be changed by reception
of a Congestion Notification Message. Its integer value
represents a percentage, from 1% to 100%.rw Unsigned32 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.74 |
eqlDcbCnRpgMinRateThis object controls the minimum transmission rate (rpgMinRate)
in multiples of 1 Mbit/s. A system SHALL support a value for
this object that is no larger than 5 Mbit/s per second.
This rate includes all bits consequent to transmitting the
frame on the LAN, including preamble, inter-frame gap, etc.rw Unsigned32 UNITS "Mbit/s" .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.75 |
eqlDcbDefaultiSCSIPriorityThe default priority value used for iSCSI when no priority
value is negotiated through DCBX.rw EqlIEEE8021PriorityValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.76 |
eqlDcbDefaultFCoEPriorityThe default priority value used for FCoE when no priority
value is negotiated through DCBX.rw EqlIEEE8021PriorityValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.77 |
eqlDcbxAdminETSConTsaTc0Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.78 |
eqlDcbxAdminETSConTsaTc1Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.79 |
eqlDcbxAdminETSConTsaTc2Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.80 |
eqlDcbxAdminETSConTsaTc3Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.81 |
eqlDcbxAdminETSConTsaTc4Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.82 |
eqlDcbxAdminETSConTsaTc5Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.83 |
eqlDcbxAdminETSConTsaTc6Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.84 |
eqlDcbxAdminETSConTsaTc7Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.85 |
eqlDcbxAdminETSRecoTsaTc0Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.86 |
eqlDcbxAdminETSRecoTsaTc1Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.87 |
eqlDcbxAdminETSRecoTsaTc2Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.88 |
eqlDcbxAdminETSRecoTsaTc3Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.89 |
eqlDcbxAdminETSRecoTsaTc4Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.90 |
eqlDcbxAdminETSRecoTsaTc5Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.91 |
eqlDcbxAdminETSRecoTsaTc6Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.92 |
eqlDcbxAdminETSRecoTsaTc7Indicates the transmission selection algorithm which is assigned
to this traffic class.rw EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.1.1.93 |
eqlDcbDynamicIfTableEqualLogic-Dynamic
A table of DCB information per each interface of a system.
Each row in this table supplies values for one port's
DCB parameters. SEQUENCE OF EqlDcbDynamicIfEntry .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2 |
eqlDcbDynamicIfEntryAn entry in the DCB table, containing information
about DCB on a single interface. EqlDcbDynamicIfEntry .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1 |
eqlDcbPfcRequestsSentA count of the invoked PFC M_CONTROL.request primitives.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.1 |
eqlDcbPfcIndicationsReceivedA count of the received PFC M_CONTROL.indication primitives.ro Counter32 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.2 |
eqlDcbxLocTCSupportedThis field is deprecated.rodeprecated EqlDcbxSupportedCapacity .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.3 |
eqlDcbxLocETSConMaxTCGIndicates the number of Traffic Class Groups supported on the
local system. A value of 0 indicates that 8 Traffic Class Groups
are supported.ro EqlDcbxSupportedCapacity .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.4 |
eqlDcbxLocETSConWillingIndicates if the local system is willing to accept the
ETS configuration recommended by the remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.5 |
eqlDcbxLocETSConTrafficClassGroupBandwidthTableEach octet corresponds to one traffic class group. The first
octet corresponds to traffic class group 0, the second to
traffic class group 1, and so on. Each octet contains the
bandwidth in percent to be allocated to the traffic class
group. Valid values are between 0 and 100 inclusive. The
total of all eight octets must equal 100.
Note that an octet string is used instead of a table to enable
atomic programming of these values which is required to fulfill
the requirement that they always total to 100.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.6 |
eqlDcbxLocETSRecoTrafficClassGroupBandwidthTableEach octet corresponds to one traffic class group. The first
octet corresponds to traffic class group 0, the second to
traffic class group 1, and so on. Each octet contains the
bandwidth in percent that the remote station is recommending
to be allocated to the traffic class group. Valid values are
between 0 and 100 inclusive. The total of all eight octets must
equal 100.
Note that an octet string is used instead of a table to enable
atomic programming of these values which is required to fulfill
the requirement that they always total to 100.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.7 |
eqlDcbxLocPFCWillingIndicates if the local system is willing to accept the
PFC configuration of the remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.8 |
eqlDcbxLocPFCMBCIndicates if the local system is capable of bypassing
MACSEC processing when MACSEC is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.9 |
eqlDcbxLocPFCCapIndicates the number of traffic classes on the local device
that may simultaneously have PFC enabled. Zero indicates no
limitation, i.e. all available traffic classes may have PFC
enabled.ro EqlDcbxSupportedCapacity .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.10 |
eqlDcbxLocAppPriorityWillingIndicates if the local system is willing to accept
the Application Priority configuration of the remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.11 |
eqlDcbxRemTCSupportedThis field is deprecated.rodeprecated EqlDcbxSupportedCapacity .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.12 |
eqlDcbxRemETSConMaxTCGIndicates the number of Traffic Class Groups supported on the
remote system. A value of 0 indicates that 8 Traffic Class Groups
are supported.ro EqlDcbxSupportedCapacity .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.13 |
eqlDcbxRemETSConWillingIndicates if the remote system is willing to accept the
ETS configuration recommended by the remote system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.14 |
eqlDcbxRemETSConTrafficClassGroupBandwidthTableEach octet corresponds to one traffic class group. The first
octet corresponds to traffic class group 0, the second to
traffic class group 1, and so on. Each octet contains the
bandwidth in percent to be allocated to the traffic class
group. Valid values are between 0 and 100 inclusive. The
total of all eight octets must equal 100.
Note that an octet string is used instead of a table to enable
atomic programming of these values which is required to fulfill
the requirement that they always total to 100.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.15 |
eqlDcbxRemETSRecoTrafficClassGroupBandwidthTableEach octet corresponds to one traffic class group. The first
octet corresponds to traffic class group 0, the second to
traffic class group 1, and so on. Each octet contains the
bandwidth in percent that the remote station is recommending
to be allocated to the traffic class group. Valid values are
between 0 and 100 inclusive. The total of all eight octets must
equal 100.
Note that an octet string is used instead of a table to enable
atomic programming of these values which is required to fulfill
the requirement that they always total to 100.ro OCTET STRING .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.16 |
eqlDcbxRemPFCWillingIndicates if the remote system is willing to accept the
PFC configuration of the local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.17 |
eqlDcbxRemPFCMBCIndicates if the remote system is capable of bypassing
MACSEC processing when MACSEC is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.18 |
eqlDcbxRemPFCCapIndicates the number of traffic classes on the remote device
that may simultaneously have PFC enabled. Zero indicates no
limitation, i.e. all available traffic classes may have PFC
enabled.ro EqlDcbxSupportedCapacity .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.19 |
eqlDcbxRemAppPriorityWillingIndicates if the remote system is willing to accept
the Application Priority configuration of the local system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.20 |
eqlDcbxLocETSConTrafficClassGroupPri0Indicates the traffic class group to which priority 0 is
assigned.ro EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.21 |
eqlDcbxLocETSConTrafficClassGroupPri1Indicates the traffic class group to which priority 1 is
assigned.ro EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.22 |
eqlDcbxLocETSConTrafficClassGroupPri2Indicates the traffic class group to which priority 2 is
assigned.ro EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.23 |
eqlDcbxLocETSConTrafficClassGroupPri3Indicates the traffic class group to which priority 3 is
assigned.ro EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.24 |
eqlDcbxLocETSConTrafficClassGroupPri4Indicates the traffic class group to which priority 4 is
assigned.ro EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.25 |
eqlDcbxLocETSConTrafficClassGroupPri5Indicates the traffic class group to which priority 5 is
to be assigned.ro EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.26 |
eqlDcbxLocETSConTrafficClassGroupPri6Indicates the traffic class group to which priority 6 is
assigned.ro EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.27 |
eqlDcbxLocETSConTrafficClassGroupPri7Indicates the traffic class group to which priority 7 is
assigned.ro EqlDcbxTrafficClassGroupValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.28 |
eqlDcbxLocPFCEnableEnabledPri0Indicates if PFC is enabled on priority 0ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.29 |
eqlDcbxLocPFCEnableEnabledPri1Indicates if PFC is enabled on priority 1ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.30 |
eqlDcbxLocPFCEnableEnabledPri2Indicates if PFC is enabled on priority 2ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.31 |
eqlDcbxLocPFCEnableEnabledPri3Indicates if PFC is enabled on priority 3ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.32 |
eqlDcbxLocPFCEnableEnabledPri4Indicates if PFC is enabled on priority 4ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.33 |
eqlDcbxLocPFCEnableEnabledPri5Indicates if PFC is enabled on priority 5ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.34 |
eqlDcbxLocPFCEnableEnabledPri6Indicates if PFC is enabled on priority 6ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.35 |
eqlDcbxLocPFCEnableEnabledPri7Indicates if PFC is enabled on priority 7ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.36 |
eqlDcbxLocVLANIdVLAN ID to use for DCB.ro EqlVlanIdentifier .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.37 |
eqlDcbxLocVLANStateState of VLAN tagging.ro EqlDcbxVlanState .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.38 |
eqlDcbxLocDCBStateCurrent state of DCB.ro EqlDcbxState .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.39 |
eqlDcbxLocPFCStateCurrent state of DCB feature PFC.ro EqlDcbxState .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.40 |
eqlDcbxLocETSStateCurrent state of DCB feature ETS.ro EqlDcbxState .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.41 |
eqlDcbxLocQCNStateCurrent state of DCB feature QCN.ro EqlDcbxState .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.42 |
eqlDcbxLociSCSIPriorityCurrent iSCSI priority.ro EqlIEEE8021PriorityValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.43 |
eqlDcbxLocFCoEPriorityCurrent state of DCB feature QCN.ro EqlIEEE8021PriorityValue .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.44 |
eqlDcbxLocBytesRxPri0Count of bytes recevied on priority 0.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.45 |
eqlDcbxLocBytesRxPri1Count of bytes recevied on priority 1.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.46 |
eqlDcbxLocBytesRxPri2Count of bytes recevied on priority 2.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.47 |
eqlDcbxLocBytesRxPri3Count of bytes recevied on priority 3.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.48 |
eqlDcbxLocBytesRxPri4Count of bytes recevied on priority 4.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.49 |
eqlDcbxLocBytesRxPri5Count of bytes recevied on priority 5.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.50 |
eqlDcbxLocBytesRxPri6Count of bytes recevied on priority 6.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.51 |
eqlDcbxLocBytesRxPri7Count of bytes recevied on priority 7.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.52 |
eqlDcbxLocBytesTxPri0Count of bytes transmitted on priority 0.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.53 |
eqlDcbxLocBytesTxPri1Count of bytes transmitted on priority 1.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.54 |
eqlDcbxLocBytesTxPri2Count of bytes transmitted on priority 2.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.55 |
eqlDcbxLocBytesTxPri3Count of bytes transmitted on priority 3.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.56 |
eqlDcbxLocBytesTxPri4Count of bytes transmitted on priority 4.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.57 |
eqlDcbxLocBytesTxPri5Count of bytes transmitted on priority 5.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.58 |
eqlDcbxLocBytesTxPri6Count of bytes transmitted on priority 6.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.59 |
eqlDcbxLocBytesTxPri7Count of bytes transmitted on priority 7.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.60 |
eqlDcbCnRpPortPriCreatedRpsPri0This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notification Message.
Dividing the change in eqlDcbCnRpPortPriCentiseconds by the
change in this object over a time interval yields the average
lifetime of an active RP during that interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.61 |
eqlDcbCnRpPortPriCreatedRpsPri1This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notification Message.
Dividing the change in eqlDcbCnRpPortPriCentiseconds by the
change in this object over a time interval yields the average
lifetime of an active RP during that interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.62 |
eqlDcbCnRpPortPriCreatedRpsPri2This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notification Message.
Dividing the change in eqlDcbCnRpPortPriCentiseconds by the
change in this object over a time interval yields the average
lifetime of an active RP during that interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.63 |
eqlDcbCnRpPortPriCreatedRpsPri3This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notification Message.
Dividing the change in eqlDcbCnRpPortPriCentiseconds by the
change in this object over a time interval yields the average
lifetime of an active RP during that interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.64 |
eqlDcbCnRpPortPriCreatedRpsPri4This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notification Message.
Dividing the change in eqlDcbCnRpPortPriCentiseconds by the
change in this object over a time interval yields the average
lifetime of an active RP during that interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.65 |
eqlDcbCnRpPortPriCreatedRpsPri5This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notification Message.
Dividing the change in eqlDcbCnRpPortPriCentiseconds by the
change in this object over a time interval yields the average
lifetime of an active RP during that interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.66 |
eqlDcbCnRpPortPriCreatedRpsPri6This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notification Message.
Dividing the change in eqlDcbCnRpPortPriCentiseconds by the
change in this object over a time interval yields the average
lifetime of an active RP during that interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.67 |
eqlDcbCnRpPortPriCreatedRpsPri7This object returns the number of times any of the
Reaction Points (RPs) controlled by this entry has had
its rpEnabled variable set TRUE by the reception of a
Congestion Notification Message.
Dividing the change in eqlDcbCnRpPortPriCentiseconds by the
change in this object over a time interval yields the average
lifetime of an active RP during that interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.68 |
eqlDcbCnRpPortPriCentisecondsPri0This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
once each centi-second, this counter is incremented by the
number of RPs this entry controls that are actively rate
limiting output frames.
Dividing the change in this object over a time interval by the
length of the interval yields the average number of RPs active
over that interval. Dividing the change in this object by the
change in eqlDcbCnRpPortPriCreatedRps over that same time
interval yields the average lifetime of an active RP during that
interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.69 |
eqlDcbCnRpPortPriCentisecondsPri1This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
once each centi-second, this counter is incremented by the
number of RPs this entry controls that are actively rate
limiting output frames.
Dividing the change in this object over a time interval by the
length of the interval yields the average number of RPs active
over that interval. Dividing the change in this object by the
change in eqlDcbCnRpPortPriCreatedRps over that same time
interval yields the average lifetime of an active RP during that
interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.70 |
eqlDcbCnRpPortPriCentisecondsPri2This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
once each centi-second, this counter is incremented by the
number of RPs this entry controls that are actively rate
limiting output frames.
Dividing the change in this object over a time interval by the
length of the interval yields the average number of RPs active
over that interval. Dividing the change in this object by the
change in eqlDcbCnRpPortPriCreatedRps over that same time
interval yields the average lifetime of an active RP during that
interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.71 |
eqlDcbCnRpPortPriCentisecondsPri3This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
once each centi-second, this counter is incremented by the
number of RPs this entry controls that are actively rate
limiting output frames.
Dividing the change in this object over a time interval by the
length of the interval yields the average number of RPs active
over that interval. Dividing the change in this object by the
change in eqlDcbCnRpPortPriCreatedRps over that same time
interval yields the average lifetime of an active RP during that
interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.72 |
eqlDcbCnRpPortPriCentisecondsPri4This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
once each centi-second, this counter is incremented by the
number of RPs this entry controls that are actively rate
limiting output frames.
Dividing the change in this object over a time interval by the
length of the interval yields the average number of RPs active
over that interval. Dividing the change in this object by the
change in eqlDcbCnRpPortPriCreatedRps over that same time
interval yields the average lifetime of an active RP during that
interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.73 |
eqlDcbCnRpPortPriCentisecondsPri5This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
once each centi-second, this counter is incremented by the
number of RPs this entry controls that are actively rate
limiting output frames.
Dividing the change in this object over a time interval by the
length of the interval yields the average number of RPs active
over that interval. Dividing the change in this object by the
change in eqlDcbCnRpPortPriCreatedRps over that same time
interval yields the average lifetime of an active RP during that
interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.74 |
eqlDcbCnRpPortPriCentisecondsPri6This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
once each centi-second, this counter is incremented by the
number of RPs this entry controls that are actively rate
limiting output frames.
Dividing the change in this object over a time interval by the
length of the interval yields the average number of RPs active
over that interval. Dividing the change in this object by the
change in eqlDcbCnRpPortPriCreatedRps over that same time
interval yields the average lifetime of an active RP during that
interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.75 |
eqlDcbCnRpPortPriCentisecondsPri7This object returns the total number of centi-seconds that
any of the Reaction Points (RPs) controlled by this entry
has had its rpEnabled variable in the TRUE state. That is,
once each centi-second, this counter is incremented by the
number of RPs this entry controls that are actively rate
limiting output frames.
Dividing the change in this object over a time interval by the
length of the interval yields the average number of RPs active
over that interval. Dividing the change in this object by the
change in eqlDcbCnRpPortPriCreatedRps over that same time
interval yields the average lifetime of an active RP during that
interval.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.76 |
eqlDcbxLocPfcPausePri0Number of time PFC pause frames received for priority 0.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.77 |
eqlDcbxLocPfcPausePri1Number of time PFC pause frames received for priority 1.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.78 |
eqlDcbxLocPfcPausePri2Number of time PFC pause frames received for priority 2.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.79 |
eqlDcbxLocPfcPausePri3Number of time PFC pause frames received for priority 3.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.80 |
eqlDcbxLocPfcPausePri4Number of time PFC pause frames received for priority 4.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.81 |
eqlDcbxLocPfcPausePri5Number of time PFC pause frames received for priority 5.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.82 |
eqlDcbxLocPfcPausePri6Number of time PFC pause frames received for priority 6.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.83 |
eqlDcbxLocPfcPausePri7Number of time PFC pause frames received for priority 7.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.84 |
eqlDcbxLocPfcUnpausePri0Number of time PFC unpause frames received for priority 0.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.85 |
eqlDcbxLocPfcUnpausePri1Number of time PFC unpause frames received for priority 1.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.86 |
eqlDcbxLocPfcUnpausePri2Number of time PFC unpause frames received for priority 2.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.87 |
eqlDcbxLocPfcUnpausePri3Number of time PFC unpause frames received for priority 3.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.88 |
eqlDcbxLocPfcUnpausePri4Number of time PFC unpause frames received for priority 4.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.89 |
eqlDcbxLocPfcUnpausePri5Number of time PFC unpause frames received for priority 5.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.90 |
eqlDcbxLocPfcUnpausePri6Number of time PFC unpause frames received for priority 6.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.91 |
eqlDcbxLocPfcUnpausePri7Number of time PFC unpause frames received for priority 7.ro Counter64 .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.92 |
eqlDcbxLocETSConTsaTc0Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.93 |
eqlDcbxLocETSConTsaTc1Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.94 |
eqlDcbxLocETSConTsaTc2Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.95 |
eqlDcbxLocETSConTsaTc3Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.96 |
eqlDcbxLocETSConTsaTc4Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.97 |
eqlDcbxLocETSConTsaTc5Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.98 |
eqlDcbxLocETSConTsaTc6Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.99 |
eqlDcbxLocETSConTsaTc7Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.100 |
eqlDcbxLocETSRecoTsaTc0Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.101 |
eqlDcbxLocETSRecoTsaTc1Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.102 |
eqlDcbxLocETSRecoTsaTc2Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.103 |
eqlDcbxLocETSRecoTsaTc3Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.104 |
eqlDcbxLocETSRecoTsaTc4Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.105 |
eqlDcbxLocETSRecoTsaTc5Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.106 |
eqlDcbxLocETSRecoTsaTc6Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.107 |
eqlDcbxLocETSRecoTsaTc7Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.108 |
eqlDcbxRemETSConTsaTc0Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.109 |
eqlDcbxRemETSConTsaTc1Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.110 |
eqlDcbxRemETSConTsaTc2Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.111 |
eqlDcbxRemETSConTsaTc3Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.112 |
eqlDcbxRemETSConTsaTc4Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.113 |
eqlDcbxRemETSConTsaTc5Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.114 |
eqlDcbxRemETSConTsaTc6Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.115 |
eqlDcbxRemETSConTsaTc7Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.116 |
eqlDcbxRemETSRecoTsaTc0Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.117 |
eqlDcbxRemETSRecoTsaTc1Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.118 |
eqlDcbxRemETSRecoTsaTc2Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.119 |
eqlDcbxRemETSRecoTsaTc3Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.120 |
eqlDcbxRemETSRecoTsaTc4Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.121 |
eqlDcbxRemETSRecoTsaTc5Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.122 |
eqlDcbxRemETSRecoTsaTc6Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.123 |
eqlDcbxRemETSRecoTsaTc7Indicates the transmission selection algorithm which is assigned
to this traffic class.ro EqlDcbxTransmissionSelectionAlgorithm .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.124 |
eqlDcbxLocDCBModeCurrent operating mode of DCB.ro EqlDcbxMode .1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.19.1.2.1.125 |