ENTERASYS-MAU-MIB-EXT-MIB
The ENTERASYS-MAU-MIB-EXT-MIB extends standard Media Access Unit (MAU) monitoring for Enterasys Networks switches by defining vendor-specific physical layer metrics, including port status, duplex modes, and link speeds, to facilitate granular troubleshooting of Ethernet interface connectivity and media errors.
Imported Objects
Objects
12 total| Object Name |
|---|
etsysMauMibExtMIBThis MIB module defines a portion of the SNMP MIB under
the Enterasys Networks enterprise OID that provide
extensions to the industry standard MAU-MIB. MODULE-IDENTITY .1.3.6.1.4.1.5624.1.2.59 |
etsysMauMibExtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.59.1 |
etsysMauMibExtBasic OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.59.1.1 |
etsysIfMauExtMDIXTableA table of management information used to control the MDI
crossover and extend the base ifMauTable defined in
RFC3636. SEQUENCE OF EtsysIfMauExtMDIXEntry .1.3.6.1.4.1.5624.1.2.59.1.1.1 |
etsysIfMauExtMDIXEntryAn entry in the table containing MDI crossover management
information per MAU interface. EtsysIfMauExtMDIXEntry .1.3.6.1.4.1.5624.1.2.59.1.1.1.1 |
etsysIfMauExtMDIXStatusThe value of this object determines the MDI crossover state
of the port. A value of auto(1) enables the port to
automatically detect and activate the appropriate rx/tx
crossover configuration. A value of mdi(3) will force
the port to operate as a crossover port, which is the standard
wiring configuration for a switch port. A value of mdix(2)
will force the port to operate as a straight-through port, with
no internal rx/tx crossover. This object is independent of
and not affected by auto-negotiation setting.rw Enumeration .1.3.6.1.4.1.5624.1.2.59.1.1.1.1.1 |
etsysIfMauExtMasterSlaveTable********* THIS TABLE IS DEPRECATED **********
A table of management information used to control the
master/slave configuration and extend the base ifMauTable
defined in RFC3636.deprecated SEQUENCE OF EtsysIfMauExtMasterSlaveEntry .1.3.6.1.4.1.5624.1.2.59.1.1.2 |
etsysIfMauExtMasterSlaveEntryAn entry in the table containing master/slave management
information per MAU interface.deprecated EtsysIfMauExtMasterSlaveEntry .1.3.6.1.4.1.5624.1.2.59.1.1.2.1 |
etsysIfMauExtMasterSlaveStatusIf auto-negotiation is not enabled, the value of this object
determines the master/slave state for this MAU. A value of
master(1) will force the port to operate as a master.
A value of slave(2) will force the port to operate as a slave.rwdeprecated Enumeration .1.3.6.1.4.1.5624.1.2.59.1.1.2.1.1 |
etsysMauMibExtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.59.2 |
etsysMauMibExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.59.2.1 |
etsysMauMibExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.59.2.2 |
More MIBs from Enterasys
Browse all EnterasysMIBs →The ENTERASYS-OIDS-MIB module provides the foundational Object Identifier (OID) definitions required for SNMP-based monitoring of Enterasys Networks hardware system attributes, including device identity, software versions, and hardware inventory. It serves as the structural registry enabling network management systems to map and retrieve specific system-level metrics from Enterasys switches, routers, and wireless controllers.
The ENTERASYS-CLASS-OF-SERVICE-MIB manages transmission and reception attributes for Quality of Service (QoS) classification on Extreme Networks (formerly Enterasys) edge and access devices. It enables SNMP-based configuration and monitoring of traffic prioritization policies, including queue mapping, scheduling, and bandwidth allocation parameters.
The ENTERASYS-FIREWALL-MIB enables SNMP-based configuration, policy management, and real-time monitoring of Enterasys firewall appliances, specifically exposing metrics for access control rules, session states, and interface traffic statistics.
The ENTERASYS-LSNAT-MIB provides management access to Layer 4 Session NAT (LSNAT) entities on Enterasys Networks hardware, enabling the monitoring of active session states, translation table entries, and packet/byte counters for protocol-specific NAT mappings.
The ENTERASYS-POLICY-PROFILE-MIB enables SNMP-based monitoring and configuration of per-user policy profiles on Enterasys network edge and access devices. It facilitates the retrieval and management of specific user authentication and authorization parameters, including assigned access control lists and traffic shaping rules, to enforce granular network access policies.
The ENTERASYS-TWCB-MIB-2 module enables monitoring and management of Time-Weighted Cost-Based (TWCB) routing metrics and interface attributes on Enterasys Networks switches. It provides specific counters and gauges for tracking path costs and link states to support advanced traffic engineering and load balancing decisions.