ENTERASYS-CLASS-OF-SERVICE-MIB
AI MIB Summary
The ENTERASYS-CLASS-OF-SERVICE-MIB manages transmission and reception attributes for Quality of Service (QoS) classification on Extreme Networks (formerly Enterasys) edge and access devices. It enables SNMP-based configuration and monitoring of traffic prioritization policies, including queue mapping, scheduling, and bandwidth allocation parameters.
This MIB module defines a portion of the SNMP enterprise MIBs under the Enterasys enterprise OID pertaining to the configuration and application of transmission and reception attributes that comprise class of service for Extreme network edge devices or access products.
Main OID:
etsysCosMIB.1.3.6.1.4.1.5624.1.2.55
351
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
351 total| Object Name |
|---|
etsysCosMIBThis MIB module defines a portion of the SNMP enterprise
MIBs under the Enterasys enterprise OID pertaining to the
configuration and application of transmission and reception
attributes that comprise class of service for Extreme
network edge devices or access products. MODULE-IDENTITY .1.3.6.1.4.1.5624.1.2.55 |
etsysCosObjects OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.55.1 |
etsysCosNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.55.1.0 |
etsysCosIrlExceededNotificationThis notification indicates an inbound limiter has been
exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.5624.1.2.55.1.0.1 |
etsysCosOrlExceededNotificationThis notification indicates an outbound limiter has been
exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.5624.1.2.55.1.0.2 |
etsysCosFloodLimitExceededNotificationThis notification indicates an inbound flood limiter has been
exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.5624.1.2.55.1.0.3 |
etsysCosUserIrlrsLimitExceededNotificationThis notification indicates an inbound user rate limiter/shaper
has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.5624.1.2.55.1.0.4 |
etsysCosUserOrlrsLimitExceededNotificationThis notification indicates an outbound user rate limiter/shaper
has been exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.5624.1.2.55.1.0.5 |
etsysCosMasterReset OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.55.1.1 |
etsysCosMibObjectAnullingBehaviorThis object SHALL always read false. Setting this object to
true MUST remove all existing entries from all tables in all
subordinate objects of etsysCosObjects, and nullify all
changes to any values. The resulting behavior should yield
an unconfigured etsysCosMIB.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.1.1 |
etsysCosCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.55.1.2 |
etsysCosCapabilityA list of capabilities related to class of service support.
A set bit, with the value 1, indicates support for the
described functionality. A clear bit, with the value
0, indicates the described functionality is not supported.ro Bits .1.3.6.1.4.1.5624.1.2.55.1.2.1 |
etsysCos OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.55.1.3 |
etsysCosMaxEntriesThe maximum number of entries allowed in the etsysCosTable.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.3.1 |
etsysCosNumEntriesThe current number of entries in the etsysCosTable.ro Gauge32 .1.3.6.1.4.1.5624.1.2.55.1.3.2 |
etsysCosLastChangeThe time at which the etsysCos Table was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.3.3 |
etsysCosEnableStateIf enabled(1), controls configured for this MIB supersede
controls for portions of BRIDGE-MIB dealing with priority
queue mapping, all of the CTRON-RATE-POLICING-MIB and
all of the CTRON-TX-QUEUE-ARBITRATION-MIB. A setting to
disabled(2) from enabled(1), results in the restoration of
any existing configurations from the aforementioned MIBs.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.3.4 |
etsysCosTableA table containing class of service settings to be applied
to a dot1dBridge port or port groups. SEQUENCE OF EtsysCosSettingsEntry .1.3.6.1.4.1.5624.1.2.55.1.3.5 |
etsysCosEntryConceptually defines a particular entry within the
etsysCosTable. Entries within this table MUST be
considered non-volatile and MUST be maintained across
entity resets. EtsysCosSettingsEntry .1.3.6.1.4.1.5624.1.2.55.1.3.5.1 |
etsysCosIndexA unique class of service identifier for this CoS setting.
For reasons of backward compatibility indexes 0-7 MUST exist
and be configured with a etsysCos8021dPriority which
matches the etsysCosIndex. Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.3.5.1.1 |
etsysCosRowStatusThis object allows for the dynamic creation and deletion
of entries within the etsysCosTable. Entries within
this table MUST be considered non-volatile and MUST be
maintained across entity resets.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.3.5.1.2 |
etsysCos8021dPriorityThe 802.1D priority to be associated with this Class of
Service. If this field is returned as (-1) then it has not
been configured and no action will be taken for this
attribute.rw Integer32 (-1|0..7) .1.3.6.1.4.1.5624.1.2.55.1.3.5.1.3 |
etsysCosTosValueThe Type of Service or Differentiated Services Code Point
value and mask to be associated with this Class of Service.
If this field is returned as <empty-string>, then it has not
been configured and no action will be taken for this
attribute. The first octet shall represent the TOS/DSCP value
and the second octet shall represent the mask applied to that
value. Agents that do not support masking shall fail sets to
this object that include a mask octet.rw OCTET STRING .1.3.6.1.4.1.5624.1.2.55.1.3.5.1.4 |
etsysCosTxqReferenceThe transmit queue table instance to reference for
this Class of Service.rw Integer32 .1.3.6.1.4.1.5624.1.2.55.1.3.5.1.5 |
etsysCosIrlReferenceThe inbound rate limiting table instance to reference for
this Class of Service. If this instance is returned as
(-1), no action will be taken for this attribute.rw Integer32 (-1|0..32767) .1.3.6.1.4.1.5624.1.2.55.1.3.5.1.6 |
etsysCosOrlReferenceThe outbound rate limiting table instance to reference for
this Class of Service. If this instance is returned as
(-1), no action will be taken for this attribute.rw Integer32 (-1|0..32767) .1.3.6.1.4.1.5624.1.2.55.1.3.5.1.7 |
etsysCosDropPrecedenceThe drop precedence default action. If this field is returned
as (-1) then it has not been configured and no action will be
taken for this attribute. If unsupported the agent may
optionally implement this leaf as read-only.rw Integer32 (-1|0..255) .1.3.6.1.4.1.5624.1.2.55.1.3.5.1.8 |
etsysCosFloodControlStatusControls whether flooded traffic will be rate limited based
on configuration in the etsysCosFloodControl groups.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.3.5.1.9 |
etsysCosUserIrlrsReferenceThe inbound user rate limiter/rate shaper table instance to
reference for this Class of Service. If this instance is
returned as (-1), no action will be taken for this attribute.rw Integer32 (-1|0..32767) .1.3.6.1.4.1.5624.1.2.55.1.3.5.1.10 |
etsysCosUserOrlrsReferenceThe outbound user rate limiter/rate shaper table instance to
reference for this Class of Service. If this instance is
returned as (-1), no action will be taken for this attribute.rw Integer32 (-1|0..32767) .1.3.6.1.4.1.5624.1.2.55.1.3.5.1.11 |
etsysCosTxq OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.55.1.4 |
etsysCosTxqNumPortTypesThe actual number of distinctly unique (as defined by
the set of shared Transmit Queue capabilities)
port types available for configuration on this agent.ro Integer32 .1.3.6.1.4.1.5624.1.2.55.1.4.1 |
etsysCosTxqPortTypeTableA table defining the distinctly unique transmit queue
characteristics of a group of ports. SEQUENCE OF EtsysCosTxqPortTypeEntry .1.3.6.1.4.1.5624.1.2.55.1.4.2 |
etsysCosTxqPortTypeEntryConceptually defines a particular entry within the
etsysCosTxqPortTypeTable. EtsysCosTxqPortTypeEntry .1.3.6.1.4.1.5624.1.2.55.1.4.2.1 |
etsysCosTxqPortTypeIndexThe port type associated with the unique set of ports sharing
these capabilities. Integer32 .1.3.6.1.4.1.5624.1.2.55.1.4.2.1.1 |
etsysCosTxqPortTypeDescrThe textual description that represents this set of dot1dBridge
ports.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.5624.1.2.55.1.4.2.1.2 |
etsysCosTxqPortTypeEligiblePortsThe list of dot1dBridge ports belonging (having the same
capabilities) to this port type.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.4.2.1.3 |
etsysCosTxqPortTypeUnselectedPortsThe list of dot1dBridge ports not yet bound to a user
created row (port group) in the etsysCosTxqPortGroupTable.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.4.2.1.4 |
etsysCosTxqPortTypeNumberOfQueuesThe number of queues available for configuration by this
agent on this type of port.ro Integer32 .1.3.6.1.4.1.5624.1.2.55.1.4.2.1.5 |
etsysCosTxqPortTypeSupportedRateTypesThe rate types available for use in these settings.ro EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.4.2.1.6 |
etsysCosTxqPortTypeNumberOfSlicesThe number of slices available for configuration.ro Integer32 .1.3.6.1.4.1.5624.1.2.55.1.4.2.1.7 |
etsysCosTxqPortTypeQueueAlgorithmsThe queuing algorithms available for use with these settings.ro TxqAlgorithms .1.3.6.1.4.1.5624.1.2.55.1.4.2.1.8 |
etsysCosTxqPortTypeQueueArbiterModesThe arbitration modes available for use with these setting.ro TxqArbiterModes .1.3.6.1.4.1.5624.1.2.55.1.4.2.1.9 |
etsysCosTxqPortTypeMaxDropPrecedenceThe maximum drop precedence allowed on this port type.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.4.2.1.10 |
etsysCosTxqPortTypeLLQEligibleQueuesThe queues eligible for low latency queue configuration.ro TxQueueList .1.3.6.1.4.1.5624.1.2.55.1.4.2.1.11 |
etsysCosTxqUnitTableA table containing the rate type, minimum and maximum limits
of the port groups and their respective granularity. SEQUENCE OF EtsysCosTxqUnitEntry .1.3.6.1.4.1.5624.1.2.55.1.4.3 |
etsysCosTxqUnitEntryConceptually defines a particular entry within the
etsysCosTxqUnitTable. Entries in this table indicate the port
group boundaries for the type of port specified. EtsysCosTxqUnitEntry .1.3.6.1.4.1.5624.1.2.55.1.4.3.1 |
etsysCosTxqUnitTypeIndexThe unit identifier for this port type. The metric at which
the etsysCosTxqUnitMinRate, etsysCosTxqUnitMaxRate and
etsysCosTxqUnitGranularity are applied. EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.4.3.1.1 |
etsysCosTxqUnitMaxRateThe maximum rate supported at the rate of units specified by
etsysCosTxqUnitTypeIndex.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.4.3.1.2 |
etsysCosTxqUnitMinRateThe minimum rate supported at the rate of units specified by
etsysCosTxqUnitTypeIndex.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.4.3.1.3 |
etsysCosTxqUnitGranularityThe smallest unit by which a rate can be modified.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.4.3.1.4 |
etsysCosTxqMaxPortGroupsThe maximum number of port groups supported by this agent.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.4.4 |
etsysCosTxqNumPortGroupsThe number of assigned dot1dBridge port groups present in this
agent. This number also reflects the port groups with a
default system setup indicated by a zero(0) index.ro Gauge32 .1.3.6.1.4.1.5624.1.2.55.1.4.5 |
etsysCosTxqPortGroupLastChangeThe time at which the etsysCosTxqPortTable was last
modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.4.6 |
etsysCosTxqPortGroupTableA table containing the user settings for specific types of
ports and their matching transmit queue configurations. SEQUENCE OF EtsysTxqPortCfgTypeEntry .1.3.6.1.4.1.5624.1.2.55.1.4.7 |
etsysCosTxqPortGroupEntryConceptually defines a particular entry within the
etsysCosTxqPortTypeTable. Entries within this table MUST be
considered non-volatile and MUST be maintained across entity
resets. EtsysTxqPortCfgTypeEntry .1.3.6.1.4.1.5624.1.2.55.1.4.7.1 |
etsysCosTxqPortGroupIndexThe user-specified port group for which the settings are
defined. This value MAY have meaning to the user for the
purposes of identifying groups of dot1dBridge ports with
similar function (uplink, user, etc).
A value of zero(0) has special meaning in that it identifies
the default port grouping of characteristics present in the
agent. Entries indexed by a zero have a max-access of
read-only. This value will have a system defined maximum of
etsysCosTxqMaxPortGroups. Integer32 (0|1..32767) .1.3.6.1.4.1.5624.1.2.55.1.4.7.1.1 |
etsysCosTxqPortGroupRowStatusThis object allows for the dynamic creation and deletion
of entries within the etsysCosTxqPortTypeTable. Entries within
this table MUST be considered non-volatile and MUST be
maintained across entity resets.
When this object's value is active(1) the specified dot1dBridge
ports listed in the etsysCosTxqPortGroupList shall be removed
from etsysCosTxqPortGroupUnselectedPorts.
A row in transition to the active(1) state will have its
port group list validated before activation. A port list that
cannot be made active MUST result in the row state to become
notReady(3) and no configuration action will be taken for this
row. Rows not in the active(1) state SHALL NOT be persisted
across entity resets and MUST return the ports from its
port group list to the etsysCosTxqPortGroupUnselectedPorts.
When this object's value is set to destroy(6) from an active(1)
state, all ports contained in etsysCosTxqPortList shall be
returned to the etsysCosTxqPortGroupUnselectedPorts and all
entries referencing this row shall be removed as well.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.4.7.1.2 |
etsysCosTxqPortGroupListThe list of dot1dBridge ports to be assigned to this group.
Ports in this list MUST :
o Be mutually exclusive from other entries in this table
o Be comprised of the same port type as defined by the
etsysCosTxqPortTypeIndex.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.4.7.1.3 |
etsysCosTxqPortGroupNameThe administratively assigned textual description of this
port group.rw SnmpAdminString .1.3.6.1.4.1.5624.1.2.55.1.4.7.1.4 |
etsysCosTxqPortCfgTableA table containing the queue values to be used in the
entries specified. Rows in this table are populated based
on rowCreation in the etsysCosTxqPortGroupTable. Changes to
this table are reflected in the etsysCosTxqPortGroupLastChange
value. SEQUENCE OF EtsysCosTxqPortCfgEntry .1.3.6.1.4.1.5624.1.2.55.1.4.8 |
etsysCosTxqPortCfgEntryConceptually defines a particular entry within the
etsysCosTxqPortCfgTable. Details contained within this
entry will depict the slice distributions across each queue
per dot1dBridge port, as well as determine the arbiter's
method for servicing the queues. Entries within this table
MUST be considered non-volatile and MUST be maintained across
entity resets. EtsysCosTxqPortCfgEntry .1.3.6.1.4.1.5624.1.2.55.1.4.8.1 |
etsysCosTxqPortArbModeThe mode in which the transmit queue arbiter services the
queues. When in strict-mode, the queues will be services
by numerical priority from lowest to highest. Lower priority
queues will not be services until the current queue is drained.
When set to weightedFairQ, the number of slices in a
particular queue determines the frequency of servicing.
A slice configuration of 00-00...100 will set the port to
strict-mode. When in enhancedTransmission mode the
non-enhanced transmission queues are serviced first using
low latency or strict priority. The remaining bandwidth
is then allocated to the enhanced transmission queues using
weightedFairQ.ro TxqArbiterModes .1.3.6.1.4.1.5624.1.2.55.1.4.8.1.1 |
etsysCosTxqPortSliceSettingThis object is an octet string in which the number of octets
corresponds to the number of transmit queues for each
dot1dBridge port. The value of the first octet represents the
number of 'slices' of transmit resources to allocate to
Queue 0, the second octet represents the number for Queue 1,
and so forth. The sum of all the octets in the octet string
must add up to the total number of slices available for that
port type as defined in etsysCosTxqNumberOfSlices.
For example, on a port having 4 transmit queues and where
transmit resources are divided into 16 slices, writing an
octet string of {0x00, 0x04, 0x04, 0x08} would have the
following effect:
At least 50% of the frames transmitted are from Queue 3
At least 25% of the frames transmitted are from Queue 2
At least 25% of the frames transmitted are from Queue 1
No frames will be transmitted from Queue 0 until Queues 1,
2 and 3 are empty.
This value MAY be superseded by etsysCosTxqPortEnhancedTransGroupId
when the arb mode is enhancedTransmission.rw OCTET STRING .1.3.6.1.4.1.5624.1.2.55.1.4.8.1.2 |
etsysCosTxqPortEnhancedTransMaxGroupsThe maximum number of Enhanced Transmission Groups supported
for this port type.ro Integer32 .1.3.6.1.4.1.5624.1.2.55.1.4.8.1.3 |
etsysCosTxqPortEnhancedTransGroupIdThis object is an octet string in which the number of
octets corresponds to the number of traffic class
queues for each dot1dBridgePort. The value of the first
octet represents the Enhanced Transmission Group id
for the first traffic class group, the second octet
represents the Enhanced Transmission Group id for the
second traffic class and so forth.
Setting the queue to a value between 1 to
etsysCosTxqPortEnhancedTransMaxGroups will enable the
queue for Enhanced Transmission Selection. A value of
0 will disable the queue for Enhanced Transmission
Selection. All other values are not accepted.
This value will supersede etsysCosTxqPortSliceSetting
when the arb mode is enhancedTransmission.rw OCTET STRING .1.3.6.1.4.1.5624.1.2.55.1.4.8.1.4 |
etsysCosTxqPortEnhancedTransBandwidthThis object is an octet string in which the number of
octets is equal to etsysCosTxqPortEnhancedTransMaxGroups.
The value of the first octet represents the percent
bandwidth to be allocated to the first Enhanced Transmission
Selection group, the second octet represents the bandwidth
for the second Enhanced Transmission Selection group and
so forth. The sum of all Enhanced Transmission Selection
Groups must be 100.rw OCTET STRING .1.3.6.1.4.1.5624.1.2.55.1.4.8.1.5 |
etsysCosTxqPortEnhancedTransGroupToDcbxTCThis object is an octet string in which the number of octets
is equal to etsysCosTxqPortEnhancedTransMaxGroups. The value
of the first octet represents the DCB Enhanced Transmission
Selection Traffic Class number for the first group. The second
octet represents the DCB Enhanced Transmission Selection
Traffic Class number for the second group and so forth.
DCB Enhanced Transmission Selection Traffic Classes correspond
to a value of 0 to 7 which is defined by 802.1D. A value of
255 means the group is not part of Enhanced Transmission.ro OCTET STRING .1.3.6.1.4.1.5624.1.2.55.1.4.8.1.6 |
etsysCosTxqPortEnhancedTransPriorityToDcbxTCThis object is an octet string that maps dot1d priorities to
DCB Enhanced Transmission Selection Traffic Classes. The first
octet represents the DCB Traffic class for priority 0. The second
octet represents the DCB Traffic class for priority 1 and so
forth.ro OCTET STRING .1.3.6.1.4.1.5624.1.2.55.1.4.8.1.7 |
etsysCosTxqResourceTableA table containing rate, units and queuing algorithm to be
used in the entries specified. SEQUENCE OF EtsysCosTxqResourceEntry .1.3.6.1.4.1.5624.1.2.55.1.4.9 |
etsysCosTxqResourceEntryConceptually defines a particular entry within the
etsysCosTxqResourceTable. These entries contain the specific
attributes of transmission rates (traffic shaping) and
dropping styles to be applied to dot1dBridge ports. Entries
within this table MUST be considered non-volatile and MUST be
maintained across entity resets. EtsysCosTxqResourceEntry .1.3.6.1.4.1.5624.1.2.55.1.4.9.1 |
etsysCosTxqResourceQueueNumThe queue number associated with this entry. Integer32 .1.3.6.1.4.1.5624.1.2.55.1.4.9.1.1 |
etsysCosTxqPortQUnitIdentifies the unit size for the etsysCosTxqPortRate.
Values MUST NOT exceed the capacity of the
etsysCosTxqPortType they are associated with.rw EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.4.9.1.2 |
etsysCosTxqPortQRateIdentifies the number of units used in this queue
configuration. The value (0) shall carry special meaning
that indicates the settings MUST NOT be applied to the
queue.rw Integer32 (0|1..2147483647) .1.3.6.1.4.1.5624.1.2.55.1.4.9.1.3 |
etsysCosTxqPortQAlgorithmDetermines the rules by which discarding is applied.rw TxqAlgorithms .1.3.6.1.4.1.5624.1.2.55.1.4.9.1.4 |
etsysCosTxqPortQLLQenableThis object represents the requested use of low latency
queues for this dot1dBridge port. This object is REQUIRED to
fail set attempts for unsupported hardware.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.4.9.1.5 |
etsysCosTxqPortQMinRateIdentifies the minimum number of units used in this
queue configuration. The value (0) shall carry special
meaning that indicates the settings MUST NOT be applied
to the queue.rw Integer32 (0|1..2147483647) .1.3.6.1.4.1.5624.1.2.55.1.4.9.1.6 |
etsysCosTxqReferenceMappingMaxReferenceThe maximum number of etsysCosTxqReferences allowed in the
etsysCosTxqMappingTable.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.4.10 |
etsysCosTxqReferenceMappingTableA table containing the user defined mappings of the TxQ
refences found in the etsysCosTable to physical transmit queues
associated with the specified port-group. SEQUENCE OF EtsysCosTxqReferenceMappingEntry .1.3.6.1.4.1.5624.1.2.55.1.4.11 |
etsysCosTxqReferenceMappingEntryConceptually defines a particular entry within the
etsysCosTxqReferenceMappingTable. Entries within this table
MUST be considered non-volatile and MUST be maintained across
entity resets. EtsysCosTxqReferenceMappingEntry .1.3.6.1.4.1.5624.1.2.55.1.4.11.1 |
etsysCosTxqResourceQueueNumberThe queue number to be bound to this reference.rw Integer32 .1.3.6.1.4.1.5624.1.2.55.1.4.11.1.1 |
etsysCosTxqDropProfilesMaxEntriesThe maximum number of entries allowed in the
etsysCosDropProfiles Table.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.4.12 |
etsysCosTxqDropProfilesNumEntriesThe current number of entries in the etsysCosQueueProfiles
Table.ro Gauge32 .1.3.6.1.4.1.5624.1.2.55.1.4.13 |
etsysCosTxqDropProfilesLastChangeThe time at which the etsysCosQueueProfiles Table was last
modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.4.14 |
etsysCosTxqDropProfilesTableA table containing the queue profile configurations. SEQUENCE OF EtsysCosTxqDropProfilesEntry .1.3.6.1.4.1.5624.1.2.55.1.4.15 |
etsysCosTxqDropProfilesEntryThe minimum and maximum queue depth, maximum drop probability
and queue depth at max drop probability for the queue
specified. These entries represent the currently configured
settings for this agent. Entries indexed with (0) are default
system entries. Entries within this table MUST be considered
non-volatile and MUST be maintained across entity resets. EtsysCosTxqDropProfilesEntry .1.3.6.1.4.1.5624.1.2.55.1.4.15.1 |
etsysCosTxqDropSettingIndexA unique identifier for this queue setting. Identifiers with
an index of 0 MUST be read-only and depict the system default
settings. Unsigned32 -- (0..etsysCosTxqDropProfilesMaxEntries) .1.3.6.1.4.1.5624.1.2.55.1.4.15.1.1 |
etsysCosTxqDropProfilesRowStatusThis object allows for the dynamic creation and deletion
of entries within the etsysCosTxqDropProfilesTable. Entries
within this table MUST be considered non-volatile and MUST be
maintained across entity resets.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.4.15.1.2 |
etsysCosTxqDropProfilesMinThe minimum percentage of the queue depth, above which frames
will dropped at the drop probability rate.rw Integer32 .1.3.6.1.4.1.5624.1.2.55.1.4.15.1.3 |
etsysCosTxqDropProfilesMaxThe maximum percentage of the queue depth, above which all
frames will be dropped. This object's value MUST be greater
than or equal to the etsysCosTxqDropProfilesMin.rw Integer32 .1.3.6.1.4.1.5624.1.2.55.1.4.15.1.4 |
etsysCosTxqDropProfilesMaxDropProbThe drop probability associated with this setting by
percentage. This number represents the percentage of traffic
that will be dropped once the minimum rate has been exceeded.rw Integer32 .1.3.6.1.4.1.5624.1.2.55.1.4.15.1.5 |
etsysCosTxqDropProfilesQueueDepthAtMaxProbThe drop probability percentage slope which defines how
aggressively packets are discarded as the queue fills.rw Integer32 .1.3.6.1.4.1.5624.1.2.55.1.4.15.1.6 |
etsysCosTxqDropPrecedenceTableA table containing the drop precedence configurations. SEQUENCE OF EtsysCosTxqDropPrecedenceEntry .1.3.6.1.4.1.5624.1.2.55.1.4.16 |
etsysCosTxqDropPrecedenceEntryThe drop precedence definitions for the queue specified. EtsysCosTxqDropPrecedenceEntry .1.3.6.1.4.1.5624.1.2.55.1.4.16.1 |
etsysCosTableDropPrecedenceThe corresponding etsysCosDropPrecedence from the
etsysCosTable this entry refers to. Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.4.16.1.1 |
etsysCosTxqDropProfileQueueCfgIDThe etsysCosTxqDropProfilesEntry that describes the
configuration for this entry. If this value references
a non-existent row in the etsysCosTxqDropPrecedenceTable the
device will behave as if the row existed and was populated with
default parameters.rw Integer32 -- (0 .. etsysCosTxqDropProfilesMaxEntries) .1.3.6.1.4.1.5624.1.2.55.1.4.16.1.2 |
etsysCosIrl OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.55.1.5 |
etsysCosIrlPortTypeMaxEntriesThe actual number of distinctly unique (as defined by
the set of shared inbound RateLimiting capabilities)
port types available for configuration on this agent.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.5.1 |
etsysCosIrlPortTypeTableA table defining the distinctly unique IRL
characteristics of a group of ports. SEQUENCE OF EtsysCosIrlPortTypeEntry .1.3.6.1.4.1.5624.1.2.55.1.5.2 |
etsysCosIrlPortTypeEntryConceptually defines a particular entry within the
etsysCosIrlPortTypeTable. EtsysCosIrlPortTypeEntry .1.3.6.1.4.1.5624.1.2.55.1.5.2.1 |
etsysCosIrlPortTypeIndexThe port type associated with the unique set of ports sharing
these capabilities. Integer32 .1.3.6.1.4.1.5624.1.2.55.1.5.2.1.1 |
etsysCosIrlPortTypeDescrThe textual description that represents this set of dot1dBridge
ports.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.5624.1.2.55.1.5.2.1.2 |
etsysCosIrlPortTypeEligiblePortsThe list of dot1dBridge ports belonging (having the same
capabilities) to this port type.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.5.2.1.3 |
etsysCosIrlPortTypeUnselectedPortsThe list of dot1dBridge ports not yet bound to a user
created row (port group) in the etsysCosIrlPortGroupTable.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.5.2.1.4 |
etsysCosIrlPortTypeNumberOfIRLsThe maximum number of inbound rate limiters supported by
this agent on this type of port.ro Integer32 .1.3.6.1.4.1.5624.1.2.55.1.5.2.1.5 |
etsysCosIrlPortTypeSupportedRateTypesThe rate types available on this type of port.ro EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.5.2.1.6 |
etsysCosIrlPortTypeCapabilitiesThe EtsysCosRlCapabilities available on this type of port.ro EtsysCosRlCapabilities .1.3.6.1.4.1.5624.1.2.55.1.5.2.1.7 |
etsysCosIrlUnitTableA table containing the rate type, minimum and maximum limits
of the port groups and their respective granularity. SEQUENCE OF EtsysCosIrlUnitEntry .1.3.6.1.4.1.5624.1.2.55.1.5.3 |
etsysCosIrlUnitEntryConceptually defines a particular entry within the
etsysCosIrlUnitTable. Entries in this table indicate the port
group boundaries for the type of port specified. EtsysCosIrlUnitEntry .1.3.6.1.4.1.5624.1.2.55.1.5.3.1 |
etsysCosIrlUnitTypeIndexThe unit identifier for this port type. The metric at which
the etsysCosIrlUnitMinRate, etsysCosIrlUnitMaxRate and
etsysCosIrlUnitGranularity are applied. EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.5.3.1.1 |
etsysCosIrlUnitMaxRateThe maximum rate supported at the rate of units specified by
etsysCosIrlUnitType.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.5.3.1.2 |
etsysCosIrlUnitMinRateThe minimum rate supported at the rate of units specified by
etsysCosIrlUnitType.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.5.3.1.3 |
etsysCosIrlUnitGranularityThe smallest unit by which a rate can be modified.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.5.3.1.4 |
etsysCosIrlPortGroupMaxEntriesThe maximum number of port groups supported by this agent.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.5.4 |
etsysCosIrlPortGroupNumEntriesThe number of assigned dot1dBridge port groups present in this
agent. This number also reflects the port groups with a
default system setup indicated by a zero(0) index.ro Gauge32 .1.3.6.1.4.1.5624.1.2.55.1.5.5 |
etsysCosIrlPortGroupLastChangeThe time at which the etsysCosIrlPortTypeTable was last
modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.5.6 |
etsysCosIrlPortGroupTableA table containing the settings for specific types of
dot1dBridge ports and their matching inbound rate limiting
configurations. SEQUENCE OF EtsysCosIrlPortGroupEntry .1.3.6.1.4.1.5624.1.2.55.1.5.7 |
etsysCosIrlPortGroupEntryConceptually defines a particular entry within the
etsysCosIrlPortTypeTable. Entries within this table MUST be
considered non-volatile and MUST be maintained across entity
resets. EtsysCosIrlPortGroupEntry .1.3.6.1.4.1.5624.1.2.55.1.5.7.1 |
etsysCosIrlPortGroupIndexThe user-specified port group for which the settings are
defined. This value MAY have meaning to the user for the
purposes of identifying groups of dot1dBridge ports with
similar function (uplink, user, etc).
A value of zero(0) has special meaning in that it identifies
the default port grouping of characteristics present in the
agent. Entries indexed by a zero have a max-access of
read-only. This value will have a system defined maximum of
etsysCosIrlPortGroupMaxEntries. Integer32 (0|1..32767) .1.3.6.1.4.1.5624.1.2.55.1.5.7.1.1 |
etsysCosIrlPortGroupRowStatusThis object allows for the dynamic creation and deletion
of entries within the etsysCosIrlPortGroupTable. Entries within
this table MUST be considered non-volatile and MUST be
maintained across entity resets.
When this object's value is active(1) the specified dot1dBridge
ports listed in the PortGroupList shall be removed from
UnselectedPorts.
A row in transition to the active(1) state will have its
port group list validated before activation. A port list that
cannot be made active MUST result in the row state to become
notReady(3) and no configuration action will be taken for this
row. Rows not in the active(1) state SHALL NOT be persisted
across entity resets and MUST return the ports from its
port group list to the etsysCosIrlPortTypeUnselectedPorts.
When this object's value is set to destroy(6) from an active(1)
state, all dot1dBridge ports contained in
etsysCosIrlPortGroupList shall be returned to the
etsysCosIrlPortTypeUnselectedPorts and all entries referencing
this row shall be removed as well.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.5.7.1.2 |
etsysCosIrlPortGroupListThe list of dot1dBridge ports to be assigned to this group.
Ports in this list MUST :
o Be mutually exclusive from other entries in this table
o Be comprised of the same port type as defined by the
etsysCosIrlPortTypeIndex.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.5.7.1.3 |
etsysCosIrlPortGroupNameThe administratively assigned textual description of this
port group.rw SnmpAdminString .1.3.6.1.4.1.5624.1.2.55.1.5.7.1.4 |
etsysCosIrlPortCfgTableA table containing the inbound rate limiting configurations
to be used in the entries specified. Rows in this table are
populated based on rowCreation in the etsysCosIrlPortGroupTable.
Changes to this table are reflected in the
etsysCosTxqPortGroupLastChange value. SEQUENCE OF EtsysCosIrlPortCfg .1.3.6.1.4.1.5624.1.2.55.1.5.8 |
etsysCosIrlPortCfgEntryConceptually defines a particular entry within the
etsysCosIrlPortCfgTable. Details contained within this entry
will depict the inbound rate limiter's reception rate and
parent rate limiter. Entries within this table MUST be
considered non-volatile and MUST be maintained across entity
resets. EtsysCosIrlPortCfg .1.3.6.1.4.1.5624.1.2.55.1.5.8.1 |
etsysCosIrlPortCfgFloodLimiterThis object will represent the etsysCosIrlResourceNum
to be used to limit flooded traffic.rwdeprecated Integer32 (-1|0..65535) .1.3.6.1.4.1.5624.1.2.55.1.5.8.1.2 |
etsysCosIrlResourceTableA table containing the inbound rate limiting configurations
to be used in the entries specified. SEQUENCE OF EtsysCosIrlResourceEntry .1.3.6.1.4.1.5624.1.2.55.1.5.9 |
etsysCosIrlResourceEntryConceptually defines a particular entry within the
etsysCosIrlResourceTable. These entries contain the specific
attributes of policing rates (traffic clipping) and
parent rate limiter. Entries within this table MUST be
considered non-volatile and MUST be maintained across entity
resets. EtsysCosIrlResourceEntry .1.3.6.1.4.1.5624.1.2.55.1.5.9.1 |
etsysCosIrlResourceIrlNumThe inbound rate limiter number associated with this entry. Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.5.9.1.1 |
etsysCosIrlResourceUnitsIdentifies the unit size for the etsysCosIrlPortRate.
Values MUST NOT exceed the capacity of the
etsysCosIrlPortType they are associated with.rw EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.5.9.1.2 |
etsysCosIrlResourceRateIdentifies the number of units above which packets will
considered in violation. This object is read-only for limiters
of type count(5). The value (0) shall carry special meaning
in this case of unset. Rate limiters identified as having a
value of (0) shall not have this settings applied to the
limiter.rw Integer32 (0|1..2147483647) .1.3.6.1.4.1.5624.1.2.55.1.5.9.1.3 |
etsysCosIrlResourceParentIrlSetting this object to a positive value indicates the
etsysCosIrlResourceIrlNum to be used in conjunction with
this setting. A value of (-1) indicates the parent Irl is
not configured.rw Integer32 .1.3.6.1.4.1.5624.1.2.55.1.5.9.1.4 |
etsysCosIrlResourceTypeThe characteristics applied to this rate limiter. When
chaining limiters is used, the AND / OR attribute denotes the
limiter logic in handling violation. For example, option
rePrioritizeAnd(2) requires that the current limiter AND it's
parent be violated for the packet to be reprioritized. The
rePrioritizeOr(3) option only needs one OR the other to be
violated for the action to be taken.rw EtsysRateLimitingType .1.3.6.1.4.1.5624.1.2.55.1.5.9.1.5 |
etsysCosIrlResourceActionCosIndexThis object will represent the CoS to be applied to packets
in violation of the limits set when the etsysCosIrlResourceType
is set to one of the rePrioritize types.rw Integer32 .1.3.6.1.4.1.5624.1.2.55.1.5.9.1.6 |
etsysCosIrlResourceActionThis object allows syslog, SNMP traps, or disabling actions
to be taken limiters are first exceeded.rw EtsysViolationAction .1.3.6.1.4.1.5624.1.2.55.1.5.9.1.7 |
etsysCosIrlResourceViolationPortListThe dot1dBridge ports this limiter has been violated on.
Writing this object will clear the dot1dBridge ports given
which have a corresponding bit of zero (0) in the PortList.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.5.9.1.8 |
etsysCosIrlResourceClearCountersThis object shall always read false(2). When set to true(1)
this object clears the counter associated with this entry, if
the associated entry is a limiter of type count(5).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.5.9.1.9 |
etsysCosIrlReferenceMappingMaxReferenceThe maximum number of etsysCosIrlReferences allowed in the
etsysCosIrlMappingTable.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.5.10 |
etsysCosIrlReferenceMappingLastChangeThe time at which the etsysCosIrlReferenceMappingTable was
last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.5.11 |
etsysCosIrlReferenceMappingTableA table containing the user defined mappings of the
inbound-rate-limiter-refences found in the etsysCosTable to
actual inbound-rate-limiters associated with the specified
port-group. SEQUENCE OF EtsysCosIrlReferenceMap .1.3.6.1.4.1.5624.1.2.55.1.5.12 |
etsysCosIrlReferenceMappingEntryConceptually defines a particular entry within the
etsysCosIrlReferenceMappingTable. Entries within this table
MUST be considered non-volatile and MUST be maintained across
entity resets. EtsysCosIrlReferenceMap .1.3.6.1.4.1.5624.1.2.55.1.5.12.1 |
etsysCosIrlResourceIrlNumberThe inbound rate limiter bond to this reference.rw Integer32 (-1|0..32767) .1.3.6.1.4.1.5624.1.2.55.1.5.12.1.1 |
etsysCosIrlViolationClearTableThis object SHALL always read false. Setting this object to
true removes all existing entries from the
etsysCosIrlViolationTable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.5.13 |
etsysCosIrlViolationLastChangeThe time at which the etsysCosIrlViolationTable was last
modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.5.14 |
etsysCosIrlDisabledPortsListThe list of dot1dBridge ports disabled as a result of limiting
violation. A set to this list will clear the violation status
of any port which has a corresponding clear bit in the list.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.5.15 |
etsysCosIrlViolationTableA table containing the list of entries of all dot1dBridge ports
that have detected violations of the limiters current
settings. SEQUENCE OF EtsysCosIrlViolationEntry .1.3.6.1.4.1.5624.1.2.55.1.5.16 |
etsysCosIrlViolationEntryConceptually defines a particular entry within the
etsysCosIrlViolationTable. EtsysCosIrlViolationEntry .1.3.6.1.4.1.5624.1.2.55.1.5.16.1 |
etsysCosIrlPortIndexThe dot1dBridge port on which this violation occurred. Integer32 .1.3.6.1.4.1.5624.1.2.55.1.5.16.1.1 |
etsysCosIrlViolationThis object represents the violation status for this limiter.
If this object reads true(1) the action associated with this
Irl have been taken.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.5.16.1.2 |
etsysCosIrlCounterIn order for this object to have meaningful information the
assigned limiter must be set up as a counter type limiter.
This value shall then represent the number of configured units
the limiter has recorded. If the associated limiter
is of type pps(1) then the object represents the packets
counted, otherwise it represents the octets counted.ro Counter64 .1.3.6.1.4.1.5624.1.2.55.1.5.16.1.3 |
etsysCosIrlResetFlagsThis value shall always read as 0. This object clears the
statistics gathering portion of this entry. If bit 0 is set,
the etsysCosIrlViolation TruthValue will be reset to false. If
bit 1 is set, the etsysCosIrlUnitCounter will be reset to zero.
Both bits set shall clear both properties.rw EtsysRateLimitResetBits .1.3.6.1.4.1.5624.1.2.55.1.5.16.1.4 |
etsysCosOrl OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.55.1.6 |
etsysCosOrlPortTypeMaxEntriesThe actual number of distinctly unique (as defined by
the set of shared outbound RateLimiting capabilities)
port types available for configuration on this agent.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.6.1 |
etsysCosOrlPortTypeTableA table defining the distinctly unique IRL
characteristics of a group of ports. SEQUENCE OF EtsysCosOrlPortTypeEntry .1.3.6.1.4.1.5624.1.2.55.1.6.2 |
etsysCosOrlPortTypeEntryConceptually defines a particular entry within the
etsysCosOrlPortTypeTable. EtsysCosOrlPortTypeEntry .1.3.6.1.4.1.5624.1.2.55.1.6.2.1 |
etsysCosOrlPortTypeIndexThe port type associated with the unique set of ports sharing
these capabilities. Integer32 .1.3.6.1.4.1.5624.1.2.55.1.6.2.1.1 |
etsysCosOrlPortTypeDescrThe textual description that represents this set of dot1dBridge
ports.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.5624.1.2.55.1.6.2.1.2 |
etsysCosOrlPortTypeEligiblePortsThe list of dot1dBridge ports belonging (having the same
capabilities) to this port type.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.6.2.1.3 |
etsysCosOrlPortTypeUnselectedPortsThe list of dot1dBridge ports not yet bound to a user
created row (port group) in the etsysCosOrlPortGroupTable.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.6.2.1.4 |
etsysCosOrlPortTypeNumberOfORLsThe maximum number of outbound rate limiters supported by
this agent on this type of port.ro Integer32 .1.3.6.1.4.1.5624.1.2.55.1.6.2.1.5 |
etsysCosOrlPortTypeSupportedRateTypesThe rate types available on this type of port.ro EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.6.2.1.6 |
etsysCosOrlPortTypeCapabilitiesThe EtsysCosRlCapabilities available on this type of port.ro EtsysCosRlCapabilities .1.3.6.1.4.1.5624.1.2.55.1.6.2.1.7 |
etsysCosOrlUnitTableA table containing the rate type, minimum and maximum limits
of the port groups and their respective granularity. SEQUENCE OF EtsysCosOrlUnitEntry .1.3.6.1.4.1.5624.1.2.55.1.6.3 |
etsysCosOrlUnitEntryConceptually defines a particular entry within the
etsysCosOrlUnitTable. Entries in this table indicate the port
group boundaries for the type of port specified. EtsysCosOrlUnitEntry .1.3.6.1.4.1.5624.1.2.55.1.6.3.1 |
etsysCosOrlUnitTypeIndexThe unit identifier for this port type. The metric at which
the etsysCosOrlUnitMinRate, etsysCosOrlUnitMaxRate and
etsysCosOrlUnitGranularity are applied. EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.6.3.1.1 |
etsysCosOrlUnitMaxRateThe maximum rate supported at the rate of units specified by
etsysCosOrlUnitType.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.6.3.1.2 |
etsysCosOrlUnitMinRateThe minimum rate supported at the rate of units specified by
etsysCosOrlUnitType.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.6.3.1.3 |
etsysCosOrlUnitGranularityThe smallest unit by which a rate can be modified.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.6.3.1.4 |
etsysCosOrlPortGroupMaxEntriesThe maximum number of port groups supported by this agent.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.6.4 |
etsysCosOrlPortGroupNumEntriesThe number of assigned dot1dBridge port groups present in this
agent. This number also reflects the port groups with a
default system setup indicated by a zero(0) index.ro Gauge32 .1.3.6.1.4.1.5624.1.2.55.1.6.5 |
etsysCosOrlPortGroupLastChangeThe time at which the etsysCosOrlPortTypeTable was last
modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.6.6 |
etsysCosOrlPortGroupTableA table containing the settings for specific types of
dot1dBridge ports and their matching outbound rate limiting
configurations. SEQUENCE OF EtsysCosOrlPortGroupEntry .1.3.6.1.4.1.5624.1.2.55.1.6.7 |
etsysCosOrlPortGroupEntryConceptually defines a particular entry within the
etsysCosOrlPortTypeTable. Entries within this table MUST be
considered non-volatile and MUST be maintained across entity
resets. EtsysCosOrlPortGroupEntry .1.3.6.1.4.1.5624.1.2.55.1.6.7.1 |
etsysCosOrlPortGroupIndexThe user-specified port group for which the settings are
defined. This value MAY have meaning to the user for the
purposes of identifying groups of dot1dBridge ports with
similar function (uplink, user, etc).
A value of zero(0) has special meaning in that it identifies
the default port grouping of characteristics present in the
agent. Entries indexed by a zero have a max-access of
read-only. This value will have a system defined maximum of
etsysCosOrlPortGroupMaxEntries. Integer32 (0|1..32767) .1.3.6.1.4.1.5624.1.2.55.1.6.7.1.1 |
etsysCosOrlPortGroupRowStatusThis object allows for the dynamic creation and deletion
of entries within the etsysCosOrlPortGroupTable. Entries within
this table MUST be considered non-volatile and MUST be
maintained across entity resets.
When this object's value is active(1) the specified dot1dBridge
ports listed in the PortGroupList shall be removed from
UnselectedPorts.
A row in transition to the active(1) state will have its
port group list validated before activation. A port list that
cannot be made active MUST result in the row state to become
notReady(3) and no configuration action will be taken for this
row. Rows not in the active(1) state SHALL NOT be persisted
across entity resets and MUST return the ports from its
port group list to the etsysCosOrlPortTypeUnselectedPorts.
When this object's value is set to destroy(6) from an active(1)
state, all dot1dBridge ports contained in
etsysCosOrlPortGroupList shall be returned to the
etsysCosOrlPortTypeUnselectedPorts and all entries referencing
this row shall be removed as well.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.6.7.1.2 |
etsysCosOrlPortGroupListThe list of dot1dBridge ports to be assigned to this group.
Ports in this list MUST :
o Be mutually exclusive from other entries in this table
o Be comprised of the same port type as defined by the
etsysCosOrlPortTypeIndex.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.6.7.1.3 |
etsysCosOrlPortGroupNameThe administratively assigned textual description of this
port group.rw SnmpAdminString .1.3.6.1.4.1.5624.1.2.55.1.6.7.1.4 |
etsysCosOrlPortCfgTableA table containing the outbound rate limiting configurations
to be used in the entries specified. Rows in this table are
populated based on rowCreation in the etsysCosOrlPortGroupTable.
Changes to this table are reflected in the
etsysCosTxqPortGroupLastChange value. SEQUENCE OF EtsysCosOrlPortCfg .1.3.6.1.4.1.5624.1.2.55.1.6.8 |
etsysCosOrlPortCfgEntryConceptually defines a particular entry within the
etsysCosOrlPortCfgTable. Details contained within this entry
will depict the outbound rate limiter's reception rate and
parent rate limiter. Entries within this table MUST be
considered non-volatile and MUST be maintained across entity
resets. EtsysCosOrlPortCfg .1.3.6.1.4.1.5624.1.2.55.1.6.8.1 |
etsysCosOrlPortCfgFloodLimiterThis object will represent the etsysCosOrlResourceNum
to be used to limit flooded traffic.rw Integer32 (-1|0..65535) .1.3.6.1.4.1.5624.1.2.55.1.6.8.1.2 |
etsysCosOrlResourceTableA table containing the outbound rate limiting configurations
to be used in the entries specified. SEQUENCE OF EtsysCosOrlResourceEntry .1.3.6.1.4.1.5624.1.2.55.1.6.9 |
etsysCosOrlResourceEntryConceptually defines a particular entry within the
etsysCosOrlResourceTable. These entries contain the specific
attributes of policing rates (traffic clipping) and
parent rate limiter. Entries within this table MUST be
considered non-volatile and MUST be maintained across entity
resets. EtsysCosOrlResourceEntry .1.3.6.1.4.1.5624.1.2.55.1.6.9.1 |
etsysCosOrlResourceOrlNumThe outbound rate limiter number associated with this entry. Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.1 |
etsysCosOrlResourceUnitsIdentifies the unit size for the etsysCosOrlPortRate.
Values MUST NOT exceed the capacity of the
etsysCosOrlPortType they are associated with.rw EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.2 |
etsysCosOrlResourceRateIdentifies the number of units above which packets will
considered in violation. This object is read-only for limiters
of type count(5). The value (0) shall carry special meaning
in this case of unset. Rate limiters identified as having a
value of (0) shall not have this settings applied to the
limiter.rw Integer32 (0|1..2147483647) .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.3 |
etsysCosOrlResourceParentOrlSetting this object to a positive value indicates the
etsysCosOrlResourceOrlNum to be used in conjunction with
this setting. A value of (-1) indicates the parent Orl is
not configured.rw Integer32 .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.4 |
etsysCosOrlResourceTypeThe characteristics applied to this rate limiter. When
chaining limiters is used, the AND / OR attribute denotes the
limiter logic in handling violation. For example, option
rePrioritizeAnd(2) requires that the current limiter AND it's
parent be violated for the packet to be reprioritized. The
rePrioritizeOr(3) option only needs one OR the other to be
violated for the action to be taken.rw EtsysRateLimitingType .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.5 |
etsysCosOrlResourceActionCosIndexThis object will represent the CoS to be applied to packets
in violation of the limits set when the etsysCosOrlResourceType
is set to one of the rePrioritize types.rw Integer32 .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.6 |
etsysCosOrlResourceActionThis object allows syslog, SNMP traps, or disabling actions
to be taken limiters are first exceeded.rw EtsysViolationAction .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.7 |
etsysCosOrlResourceViolationPortListThe dot1dBridge ports this limiter has been violated on.
Writing this object will clear the dot1dBridge ports given
which have a corresponding bit of zero (0) in the PortList.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.8 |
etsysCosOrlResourceClearCountersThis object shall always read false(2). When set to true(1)
this object clears the counter associated with this entry, if
the associated entry is a limiter of type count(5).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.6.9.1.9 |
etsysCosOrlReferenceMappingMaxReferenceThe maximum number of etsysCosOrlReferences allowed in the
etsysCosOrlMappingTable.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.6.10 |
etsysCosOrlReferenceMappingLastChangeThe time at which the etsysCosOrlReferenceMappingTable was
last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.6.11 |
etsysCosOrlReferenceMappingTableA table containing the user defined mappings of the
outbound-rate-limiter-refences found in the etsysCosTable to
actual outbound-rate-limiters associated with the specified
port-group. SEQUENCE OF EtsysCosOrlReferenceMap .1.3.6.1.4.1.5624.1.2.55.1.6.12 |
etsysCosOrlReferenceMappingEntryConceptually defines a particular entry within the
etsysCosOrlReferenceMappingTable. Entries within this table
MUST be considered non-volatile and MUST be maintained across
entity resets. EtsysCosOrlReferenceMap .1.3.6.1.4.1.5624.1.2.55.1.6.12.1 |
etsysCosOrlResourceOrlNumberThe outbound rate limiter bond to this reference.rw Integer32 (-1|0..32767) .1.3.6.1.4.1.5624.1.2.55.1.6.12.1.1 |
etsysCosOrlViolationClearTableThis object SHALL always read false. Setting this object to
true removes all existing entries from the
etsysCosOrlViolationTable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.6.13 |
etsysCosOrlViolationLastChangeThe time at which the etsysCosOrlViolationTable was last
modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.6.14 |
etsysCosOrlDisabledPortsListThe list of dot1dBridge ports disabled as a result of limiting
violation. A set to this list will clear the violation status
of any port which has a corresponding clear bit in the list.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.6.15 |
etsysCosOrlViolationTableA table containing the list of entries of all dot1dBridge ports
that have detected violations of the limiters current
settings. SEQUENCE OF EtsysCosOrlViolationEntry .1.3.6.1.4.1.5624.1.2.55.1.6.16 |
etsysCosOrlViolationEntryConceptually defines a particular entry within the
etsysCosOrlViolationTable. EtsysCosOrlViolationEntry .1.3.6.1.4.1.5624.1.2.55.1.6.16.1 |
etsysCosOrlPortIndexThe dot1dBridge port on which this violation occurred. Integer32 .1.3.6.1.4.1.5624.1.2.55.1.6.16.1.1 |
etsysCosOrlViolationThis object represents the violation status for this limiter.
If this object reads true(1) the action associated with this
Orl have been taken.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.6.16.1.2 |
etsysCosOrlCounterIn order for this object to have meaningful information the
assigned limiter must be set up as a counter type limiter.
This value shall then represent the number of configured units
the limiter has recorded. If the associated limiter
is of type pps(0) then the object represents the packets
counted, otherwise it represents the octets counted.ro Counter64 .1.3.6.1.4.1.5624.1.2.55.1.6.16.1.3 |
etsysCosOrlResetFlagsThis value shall always read as 0. This object clears the
statistics gathering portion of this entry. If bit 0 is set,
the etsysCosOrlViolation TruthValue will be reset to false. If
bit 1 is set, the etsysCosOrlUnitCounter will be reset to zero.
Both bits set shall clear both properties.rw EtsysRateLimitResetBits .1.3.6.1.4.1.5624.1.2.55.1.6.16.1.4 |
etsysCosFloodControl OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.55.1.7 |
etsysCosFloodCtrlPortTypeMaxEntriesThe actual number of distinctly unique (as defined by
the set of shared flooded RateLimiting capabilities)
port types available for configuration on this agent.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.7.1 |
etsysCosFloodCtrlPortTypeTableA table defining the distinctly unique Broadcast Rate Limiting
characteristics of a group of ports. SEQUENCE OF EtsysCosFloodCtrlPortTypeEntry .1.3.6.1.4.1.5624.1.2.55.1.7.2 |
etsysCosFloodCtrlPortTypeEntryConceptually defines a particular entry within the
etsysCosFloodCtrlPortTypeTable. EtsysCosFloodCtrlPortTypeEntry .1.3.6.1.4.1.5624.1.2.55.1.7.2.1 |
etsysCosFloodCtrlPortTypeIndexThe port type associated with the unique set of ports sharing
these capabilities.ro Integer32 .1.3.6.1.4.1.5624.1.2.55.1.7.2.1.1 |
etsysCosFloodCtrlPortTypeDescrThe textual description that represents this set of dot1dBridge
ports.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.5624.1.2.55.1.7.2.1.2 |
etsysCosFloodCtrlPortTypeEligiblePortsThe list of dot1dBridge ports belonging (having the same
capabilities) to this port type.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.7.2.1.3 |
etsysCosFloodCtrlPortTypeUnselectedPortsThe list of dot1dBridge ports not yet bound to a user
created row (port group) in the etsysCosFloodCtrlPortGroupTable.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.7.2.1.4 |
etsysCosFloodCtrlPortTypeSupportedRateTypesThe rate types available on this type of port.ro EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.7.2.1.5 |
etsysCosFloodCtrlPortTypeCapabilitiesThe EtsysCosRlCapabilities available on this type of port.ro EtsysCosRlCapabilities .1.3.6.1.4.1.5624.1.2.55.1.7.2.1.7 |
etsysCosFloodCtrlUnitTableA table containing the rate type, minimum and maximum limits
of the port groups and their respective granularity. SEQUENCE OF EtsysCosFloodCtrlUnitEntry .1.3.6.1.4.1.5624.1.2.55.1.7.3 |
etsysCosFloodCtrlUnitEntryConceptually defines a particular entry within the
etsysCosFloodCtrlUnitTable. Entries in this table indicate the port
group boundaries for the type of port specified. EtsysCosFloodCtrlUnitEntry .1.3.6.1.4.1.5624.1.2.55.1.7.3.1 |
etsysCosFloodCtrlUnitTypeIndexThe unit identifier for this port type. The metric at which
the etsysCosFloodCtrlUnitMinRate, etsysCosFloodCtrlUnitMaxRate and
etsysCosFloodCtrlUnitGranularity are applied. EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.7.3.1.1 |
etsysCosFloodCtrlUnitMaxRateThe maximum rate supported at the rate of units specified by
etsysCosFloodCtrlUnitTypeIndex.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.7.3.1.2 |
etsysCosFloodCtrlUnitMinRateThe minimum rate supported at the rate of units specified by
etsysCosFloodCtrlUnitTypeIndex.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.7.3.1.3 |
etsysCosFloodCtrlUnitGranularityThe smallest unit by which a rate can be modified.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.7.3.1.4 |
etsysCosFloodCtrlPortGroupMaxEntriesThe maximum number of port groups supported by this agent.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.7.4 |
etsysCosFloodCtrlPortGroupNumEntriesThe number of assigned dot1dBridge port groups present in this
agent. This number also reflects the port groups with a
default system setup indicated by a zero(0) index.ro Gauge32 .1.3.6.1.4.1.5624.1.2.55.1.7.5 |
etsysCosFloodCtrlPortGroupLastChangeThe time at which the etsysCosFloodCtrlPortTypeTable was last
modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.7.6 |
etsysCosFloodCtrlPortGroupTableA table containing the settings for specific types of
dot1dBridge ports and their matching flooded rate limiting
configurations. SEQUENCE OF EtsysCosFloodCtrlPortGroupEntry .1.3.6.1.4.1.5624.1.2.55.1.7.7 |
etsysCosFloodCtrlPortGroupEntryConceptually defines a particular entry within the
etsysCosFloodCtrlPortTypeTable. Entries within this table MUST be
considered non-volatile and MUST be maintained across entity
resets. EtsysCosFloodCtrlPortGroupEntry .1.3.6.1.4.1.5624.1.2.55.1.7.7.1 |
etsysCosFloodCtrlPortGroupIndexThe user-specified port group for which the settings are
defined. This value MAY have meaning to the user for the
purposes of identifying groups of dot1dBridge ports with
similar function (uplink, user, etc).
A value of zero(0) has special meaning in that it identifies
the default port grouping of characteristics present in the
agent. Entries indexed by a zero have a max-access of
read-only. This value will have a system defined maximum of
etsysCosFloodCtrlPortGroupMaxEntries.ro Integer32 (0|1..32767) .1.3.6.1.4.1.5624.1.2.55.1.7.7.1.1 |
etsysCosFloodCtrlPortGroupRowStatusThis object allows for the dynamic creation and deletion
of entries within the etsysCosFloodCtrlPortGroupTable. Entries within
this table MUST be considered non-volatile and MUST be
maintained across entity resets.
When this object's value is active(1) the specified dot1dBridge
ports listed in the PortGroupList shall be removed from
UnselectedPorts.
A row in transition to the active(1) state will have its
port group list validated before activation. A port list that
cannot be made active MUST result in the row state to become
notReady(3) and no configuration action will be taken for this
row. Rows not in the active(1) state SHALL NOT be persisted
across entity resets and MUST return the ports from its
port group list to the etsysCosFloodCtrlPortTypeUnselectedPorts.
When this object's value is set to destroy(6) from an active(1)
state, all dot1dBridge ports contained in
etsysCosFloodCtrlPortGroupList shall be returned to the
etsysCosFloodCtrlPortTypeUnselectedPorts and all entries referencing
this row shall be removed as well.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.7.7.1.2 |
etsysCosFloodCtrlPortGroupListThe list of dot1dBridge ports to be assigned to this group.
Ports in this list MUST :
o Be mutually exclusive from other entries in this table
o Be comprised of the same port type as defined by the
etsysCosFloodCtrlPortTypeIndex.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.7.7.1.3 |
etsysCosFloodCtrlPortGroupNameThe administratively assigned textual description of this
port group.rw SnmpAdminString .1.3.6.1.4.1.5624.1.2.55.1.7.7.1.4 |
etsysCosFloodCtrlSyslogActionMsgFormatThis object controls the format of syslog messages sent in
response to a flood rate limit being violated.
A value of notification(1) causes the syslog message to
provide the index of the violated limiter and the port(s) that
the violation occurred on.
A value of notificationWithPktHdr(2) causes the syslog message
to provide the first 64 bytes of the violating packet in
addition to the information provided by notification(1).rw Enumeration .1.3.6.1.4.1.5624.1.2.55.1.7.8 |
etsysCosFloodCtrlResourceTableA table containing the inbound rate limiting configurations
to be used in the entries specified. SEQUENCE OF EtsysCosFloodCtrlResourceEntry .1.3.6.1.4.1.5624.1.2.55.1.7.9 |
etsysCosFloodCtrlResourceEntryConceptually defines a particular entry within the
etsysCosFloodCtrlResourceTable. These entries contain the
specific attributes of flood policing rates (traffic clipping).
Entries within this table MUST be considered non-volatile and
MUST be maintained across entity resets. EtsysCosFloodCtrlResourceEntry .1.3.6.1.4.1.5624.1.2.55.1.7.9.1 |
etsysCosFloodCtrlFloodTypeThe type of received traffic that rate limited based on this
row entries configured limits.ro Enumeration .1.3.6.1.4.1.5624.1.2.55.1.7.9.1.1 |
etsysCosFloodCtrlResourceUnitsIdentifies the unit size for the etsysCosFloodCtrlPortRate.
Values MUST NOT exceed the capacity of the
etsysCosFloodCtrlPortType they are associated with.rw EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.7.9.1.2 |
etsysCosFloodCtrlResourceRateIdentifies the number of units above which packets will
considered in violation.
The value (0) shall carry special meaning
in this case of unset. Rate limiters identified as having a
value of (0) shall not have this settings applied to the
limiter.rw Integer32 (0|1..2147483647) .1.3.6.1.4.1.5624.1.2.55.1.7.9.1.3 |
etsysCosFloodCtrlResourceActionThis object allows packet dropping, syslog, SNMP traps, or disabling
actions to be taken limiters are first exceeded. It is permissible
for no actions to be specified, which effectively disables the
limiter.rw Bits .1.3.6.1.4.1.5624.1.2.55.1.7.9.1.4 |
etsysCosFloodCtrlResourceViolationPortListThe dot1dBridge ports this limiter has been violated on.
Writing this object will clear the dot1dBridge ports given
which have a corresponding bit of zero (0) in the PortList.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.7.9.1.5 |
etsysCosFloodCtrlResourceClearCountersThis object shall always read false(2). When set to true(1)
this object clears the counter associated with this entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.7.9.1.6 |
etsysCosFloodCtrlViolationClearTableThis object SHALL always read false. Setting this object to
true removes all existing entries from the
etsysCosFloodCtrlViolationTable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.7.10 |
etsysCosFloodCtrlViolationLastChangeThe time at which the etsysCosFloodCtrlViolationTable was last
modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.7.11 |
etsysCosFloodCtrlDisabledPortsListThe list of dot1dBridge ports disabled as a result of limiting
violation. A set to this list will clear the violation status
of any port which has a corresponding clear bit in the list.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.7.12 |
etsysCosFloodCtrlViolationTableA table containing the list of entries of all dot1dBridge ports
that have detected violations of the limiters current
settings. SEQUENCE OF EtsysCosFloodCtrlViolationEntry .1.3.6.1.4.1.5624.1.2.55.1.7.13 |
etsysCosFloodCtrlViolationEntryConceptually defines a particular entry within the
etsysCosFloodCtrlViolationTable. EtsysCosFloodCtrlViolationEntry .1.3.6.1.4.1.5624.1.2.55.1.7.13.1 |
etsysCosFloodCtrlViolationThis object represents the violation status for this limiter.
If this object reads true(1) the action associated with this
FloodCtrl have been taken.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.7.13.1.1 |
etsysCosFloodCtrlCounterThe number of configured units the limiter has recorded.
If the associated limiter is of type pps(1) then the object
represents the packets counted, otherwise it represents the
octets counted.ro Counter64 .1.3.6.1.4.1.5624.1.2.55.1.7.13.1.2 |
etsysCosFloodCtrlResetFlagsThis value shall always read as BITS contstruct with no bit set.
This object clears the statistics gathering portion of this entry.
If bit 0 is set, the etsysCosFloodCtrlViolation TruthValue will be
reset to false(2). If bit 1 is set, the
etsysCosFloodCtrlUnitCounter will be reset to zero. Setting both
bits simultaneously shall clear both properties.rw EtsysRateLimitResetBits .1.3.6.1.4.1.5624.1.2.55.1.7.13.1.3 |
etsysCosUserIrlrs OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.55.1.8 |
etsysCosUserIrlrsPortTypeMaxEntriesThe actual number of distinctly unique (as defined by
the set of shared user rate limiting/shaping (UserRlRs)
capabilities) port types available for configuration on
this agent.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.8.1 |
etsysCosUserIrlrsPortTypeTableA table defining the distinctly unique UserRlRs
characteristics of a group of ports. SEQUENCE OF EtsysCosUserIrlrsPortTypeEntry .1.3.6.1.4.1.5624.1.2.55.1.8.2 |
etsysCosUserIrlrsPortTypeEntryConceptually defines a particular entry within the
etsysCosUserIrlrsPortTypeTable. EtsysCosUserIrlrsPortTypeEntry .1.3.6.1.4.1.5624.1.2.55.1.8.2.1 |
etsysCosUserIrlrsPortTypeIndexThe port type associated with the unique set of ports sharing
these capabilities. Integer32 .1.3.6.1.4.1.5624.1.2.55.1.8.2.1.1 |
etsysCosUserIrlrsPortTypeDescrThe textual description that represents this set of dot1dBridge
ports.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.5624.1.2.55.1.8.2.1.2 |
etsysCosUserIrlrsPortTypeEligiblePortsThe list of dot1dBridge ports belonging (having the same
capabilities) to this port type.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.8.2.1.3 |
etsysCosUserIrlrsPortTypeUnselectedPortsThe list of dot1dBridge ports not yet bound to a user
created row (port group) in the etsysCosUserIrlrsPortGroupTable.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.8.2.1.4 |
etsysCosUserIrlrsPortTypeNumberOfUserRlRssThe maximum number of user rate limiters(or shapers) supported by
this agent on this type of port.ro Integer32 .1.3.6.1.4.1.5624.1.2.55.1.8.2.1.5 |
etsysCosUserIrlrsPortTypeSupportedRateTypesThe rate types available on this type of port.ro EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.8.2.1.6 |
etsysCosUserIrlrsPortTypeCapabilitiesThe EtsysCosRlCapabilities available on this type of port.ro EtsysCosRlCapabilities .1.3.6.1.4.1.5624.1.2.55.1.8.2.1.7 |
etsysCosUserIrlrsPortTypeModesThe EtsysCosUserModeCapabilities available on this type of port.ro EtsysCosUserModeCapabilities .1.3.6.1.4.1.5624.1.2.55.1.8.2.1.8 |
etsysCosUserIrlrsUnitTableA table containing the rate type, minimum and maximum limits
of the port groups and their respective granularity. SEQUENCE OF EtsysCosUserIrlrsUnitEntry .1.3.6.1.4.1.5624.1.2.55.1.8.3 |
etsysCosUserIrlrsUnitEntryConceptually defines a particular entry within the
etsysCosUserIrlrsUnitTable. Entries in this table indicate the port
group boundaries for the type of port specified. EtsysCosUserIrlrsUnitEntry .1.3.6.1.4.1.5624.1.2.55.1.8.3.1 |
etsysCosUserIrlrsUnitTypeIndexThe unit identifier for this port type. The metric at which
the etsysCosUserIrlrsUnitMinRate,
etsysCosUserIrlrsUnitMaxRate and
etsysCosUserIrlrsUnitGranularity are applied. EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.8.3.1.1 |
etsysCosUserIrlrsUnitMaxRateThe maximum rate supported at the rate of units specified by
etsysCosUserIrlrsUnitType.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.8.3.1.2 |
etsysCosUserIrlrsUnitMinRateThe minimum rate supported at the rate of units specified by
etsysCosUserIrlrsUnitType.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.8.3.1.3 |
etsysCosUserIrlrsUnitGranularityThe smallest unit by which a rate can be modified.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.8.3.1.4 |
etsysCosUserIrlrsPortGroupMaxEntriesThe maximum number of port groups supported by this agent.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.8.4 |
etsysCosUserIrlrsPortGroupNumEntriesThe number of assigned dot1dBridge port groups present in this
agent. This number also reflects the port groups with a
default system setup indicated by a zero(0) index.ro Gauge32 .1.3.6.1.4.1.5624.1.2.55.1.8.5 |
etsysCosUserIrlrsPortGroupLastChangeThe time at which the etsysCosUserIrlrsPortTypeTable was last
modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.8.6 |
etsysCosUserIrlrsPortGroupTableA table containing the settings for specific types of
dot1dBridge ports and their matching user rate limiting(or shaping)
configurations. SEQUENCE OF EtsysCosUserIrlrsPortGroupEntry .1.3.6.1.4.1.5624.1.2.55.1.8.7 |
etsysCosUserIrlrsPortGroupEntryConceptually defines a particular entry within the
etsysCosUserIrlrsPortTypeTable. Entries within this table MUST be
considered non-volatile and MUST be maintained across entity
resets. EtsysCosUserIrlrsPortGroupEntry .1.3.6.1.4.1.5624.1.2.55.1.8.7.1 |
etsysCosUserIrlrsPortGroupIndexThe user-specified port group for which the settings are
defined. This value MAY have meaning to the user for the
purposes of identifying groups of dot1dBridge ports with
similar function (uplink, user, etc).
A value of zero(0) has special meaning in that it identifies
the default port grouping of characteristics present in the
agent. Entries indexed by a zero have a max-access of
read-only. This value will have a system defined maximum of
etsysCosUserIrlrsPortGroupMaxEntries. Integer32 (0|1..32767) .1.3.6.1.4.1.5624.1.2.55.1.8.7.1.1 |
etsysCosUserIrlrsPortGroupRowStatusThis object allows for the dynamic creation and deletion
of entries within the etsysCosUserIrlrsPortGroupTable.
Entries within this table MUST be considered non-volatile
and MUST be maintained across entity resets.
When this object's value is active(1) the specified dot1dBridge
ports listed in the PortGroupList shall be removed from
UnselectedPorts.
A row in transition to the active(1) state will have its
port group list validated before activation. A port list that
cannot be made active MUST result in the row state to become
notReady(3) and no configuration action will be taken for this
row. Rows not in the active(1) state SHALL NOT be persisted
across entity resets and MUST return the ports from its
port group list to the etsysCosUserIrlrsPortTypeUnselectedPorts.
When this object's value is set to destroy(6) from an active(1)
state, all dot1dBridge ports contained in
etsysCosUserIrlrsPortGroupList shall be returned to the
etsysCosUserIrlrsPortTypeUnselectedPorts and all entries
referencing this row shall be removed as well.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.8.7.1.2 |
etsysCosUserIrlrsPortGroupListThe list of dot1dBridge ports to be assigned to this group.
Ports in this list MUST :
o Be mutually exclusive from other entries in this table
o Be comprised of the same port type as defined by the
etsysCosUserIrlrsPortTypeIndex.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.8.7.1.3 |
etsysCosUserIrlrsPortGroupNameThe administratively assigned textual description of this
port group.rw SnmpAdminString .1.3.6.1.4.1.5624.1.2.55.1.8.7.1.4 |
etsysCosUserIrlrsResourceTableA table containing the user rate limiting(or shaping) configurations
to be used in the entries specified. SEQUENCE OF EtsysCosUserIrlrsResourceEntry .1.3.6.1.4.1.5624.1.2.55.1.8.8 |
etsysCosUserIrlrsResourceEntryConceptually defines a particular entry within the
etsysCosUserIrlrsResourceTable. These entries contain the
specific attributes of policing rates (traffic clipping or shaping)
and parent rate limiter (or shaper). Entries within this table MUST be
considered non-volatile and MUST be maintained across entity
resets. EtsysCosUserIrlrsResourceEntry .1.3.6.1.4.1.5624.1.2.55.1.8.8.1 |
etsysCosUserIrlrsResourceUserIrlrsNumThe user rate limiter(or shaper) number associated with this entry. Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.8.8.1.1 |
etsysCosUserIrlrsResourceUnitsIdentifies the unit size for the etsysCosUserIrlrsPortRate.
Values MUST NOT exceed the capacity of the
etsysCosUserIrlrsPortType they are associated with.rw EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.8.8.1.2 |
etsysCosUserIrlrsResourceRateIdentifies the number of units above which packets will
considered in violation. This object is read-only for
limiters(or shapers) of type count(5). The value (0)
shall carry special meaning in this case of unset.
Rate Limiters(or Shapers) identified as having a value of (0)
shall not have this settings applied to the limiter(or shaper).rw Integer32 (0|1..2147483647) .1.3.6.1.4.1.5624.1.2.55.1.8.8.1.3 |
etsysCosUserIrlrsResourceParentUserIrlrsSetting this object to a positive value indicates the
etsysCosUserIrlrsResourceUserIrlrsNum to be used in
conjunction with this setting. A value of (-1) indicates the
parent UserRlRs is not configured.rw Integer32 .1.3.6.1.4.1.5624.1.2.55.1.8.8.1.4 |
etsysCosUserIrlrsResourceTypeThe characteristics applied to this rate limiter(or shaper).
When chaining is used, the AND / OR attribute denotes the
limiter(or shaper) logic in handling violation. For example,
option rePrioritizeAnd(2) requires that the current limiter AND
it's parent be violated for the packet to be reprioritized. The
rePrioritizeOr(3) option only needs one OR the other to be
violated for the action to be taken.rw EtsysRateLimitingType .1.3.6.1.4.1.5624.1.2.55.1.8.8.1.5 |
etsysCosUserIrlrsResourceActionCosIndexThis object will represent the CoS to be applied to packets
in violation of the limits set when the
etsysCosUserIrlrsResourceType is set to one of the
rePrioritize types.rw Integer32 .1.3.6.1.4.1.5624.1.2.55.1.8.8.1.6 |
etsysCosUserIrlrsResourceActionThis object allows syslog, SNMP traps, or disabling actions
to be taken when limiters (shapers) are first exceeded.rw EtsysViolationAction .1.3.6.1.4.1.5624.1.2.55.1.8.8.1.7 |
etsysCosUserIrlrsResourceViolationPortListThe dot1dBridge ports this limiter(or shaper) has been violated on.
Writing this object will clear the dot1dBridge ports given
which have a corresponding bit of zero (0) in the PortList.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.8.8.1.8 |
etsysCosUserIrlrsResourceClearCountersThis object shall always read false(2). When set to true(1)
this object clears the counter associated with this entry, if
the associated entry is a limiter(or shaper) of type count(5).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.8.8.1.9 |
etsysCosUserIrlrsResourceModeThis object will represent the type of limiter or shaper that this
object is currently configured to.rw EtsysCosRlModes .1.3.6.1.4.1.5624.1.2.55.1.8.8.1.10 |
etsysCosUserIrlrsReferenceMappingMaxReferenceThe maximum number of etsysCosUserIrlrsReferences allowed in the
etsysCosUserIrlrsMappingTable.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.8.9 |
etsysCosUserIrlrsReferenceMappingLastChangeThe time at which the etsysCosUserIrlrsReferenceMappingTable was
last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.8.10 |
etsysCosUserIrlrsReferenceMappingTableA table containing the user defined mappings of the
user rate limiter(or shaper) refences found in the etsysCosTable to
actual user rate limiters(or shapers) associated with the specified
port-group. SEQUENCE OF EtsysCosUserIrlrsReferenceMap .1.3.6.1.4.1.5624.1.2.55.1.8.11 |
etsysCosUserIrlrsReferenceMappingEntryConceptually defines a particular entry within the
etsysCosUserIrlrsReferenceMappingTable. Entries within this table
MUST be considered non-volatile and MUST be maintained across
entity resets. EtsysCosUserIrlrsReferenceMap .1.3.6.1.4.1.5624.1.2.55.1.8.11.1 |
etsysCosUserIrlrsResourceUserIrlrsNumberThe user rate limiter(or shaper) bound to this reference.rw Integer32 (-1|0..32767) .1.3.6.1.4.1.5624.1.2.55.1.8.11.1.1 |
etsysCosUserIrlrsViolationClearTableThis object SHALL always read false. Setting this object to
true removes all existing entries from the
etsysCosUserIrlrsViolationTable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.8.12 |
etsysCosUserIrlrsViolationLastChangeThe time at which the etsysCosUserIrlrsViolationTable was last
modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.8.13 |
etsysCosUserIrlrsViolationTableA table containing the list of entries of all users as classified by
etsysPolicyRules that have detected violations of the
limiters(or shapers) current settings. SEQUENCE OF EtsysCosUserIrlrsViolationEntry .1.3.6.1.4.1.5624.1.2.55.1.8.15 |
etsysCosUserIrlrsViolationEntryConceptually defines a particular entry within the
etsysCosUserIrlrsViolationTable. EtsysCosUserIrlrsViolationEntry .1.3.6.1.4.1.5624.1.2.55.1.8.15.1 |
etsysCosUserIrlrsViolationThis object represents the violation status for this
limiter(or shaper). If this object reads true(1) the action
associated with this UserIrlrs have been taken.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.8.15.1.5 |
etsysCosUserIrlrsCounterIn order for this object to have meaningful information the
assigned limiter must be set up as a counter type limiter.
This value shall then represent the number of configured units
the limiter has recorded. If the associated limiter
is of type pps(0) then the object represents the packets
counted, otherwise it represents the octets counted.ro Counter64 .1.3.6.1.4.1.5624.1.2.55.1.8.15.1.6 |
etsysCosUserIrlrsResetFlagsThis value shall always read as 0. This object clears the
statistics gathering portion of this entry. If bit 0 is set,
the etsysCosUserIrlrsViolation TruthValue will be reset to false. If
bit 1 is set, the etsysCosUserIrlrsUnitCounter will be reset to zero.
Both bits set shall clear both properties.rw EtsysRateLimitResetBits .1.3.6.1.4.1.5624.1.2.55.1.8.15.1.7 |
etsysCosUserOrlrs OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.55.1.9 |
etsysCosUserOrlrsPortTypeMaxEntriesThe actual number of distinctly unique (as defined by
the set of shared user rate limiting/shaping (UserRlRs)
capabilities) port types available for configuration on
this agent.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.9.1 |
etsysCosUserOrlrsPortTypeTableA table defining the distinctly unique UserRlRs
characteristics of a group of ports. SEQUENCE OF EtsysCosUserOrlrsPortTypeEntry .1.3.6.1.4.1.5624.1.2.55.1.9.2 |
etsysCosUserOrlrsPortTypeEntryConceptually defines a particular entry within the
etsysCosUserOrlrsPortTypeTable. EtsysCosUserOrlrsPortTypeEntry .1.3.6.1.4.1.5624.1.2.55.1.9.2.1 |
etsysCosUserOrlrsPortTypeIndexThe port type associated with the unique set of ports sharing
these capabilities. Integer32 .1.3.6.1.4.1.5624.1.2.55.1.9.2.1.1 |
etsysCosUserOrlrsPortTypeDescrThe textual description that represents this set of dot1dBridge
ports.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.5624.1.2.55.1.9.2.1.2 |
etsysCosUserOrlrsPortTypeEligiblePortsThe list of dot1dBridge ports belonging (having the same
capabilities) to this port type.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.9.2.1.3 |
etsysCosUserOrlrsPortTypeUnselectedPortsThe list of dot1dBridge ports not yet bound to a user
created row (port group) in the etsysCosUserOrlrsPortGroupTable.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.9.2.1.4 |
etsysCosUserOrlrsPortTypeNumberOfUserRlRssThe maximum number of user rate limiters(or shapers) supported by
this agent on this type of port.ro Integer32 .1.3.6.1.4.1.5624.1.2.55.1.9.2.1.5 |
etsysCosUserOrlrsPortTypeSupportedRateTypesThe rate types available on this type of port.ro EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.9.2.1.6 |
etsysCosUserOrlrsPortTypeCapabilitiesThe EtsysCosRlCapabilities available on this type of port.ro EtsysCosRlCapabilities .1.3.6.1.4.1.5624.1.2.55.1.9.2.1.7 |
etsysCosUserOrlrsPortTypeModesThe EtsysCosUserModeCapabilities available on this type of port.ro EtsysCosUserModeCapabilities .1.3.6.1.4.1.5624.1.2.55.1.9.2.1.8 |
etsysCosUserOrlrsUnitTableA table containing the rate type, minimum and maximum limits
of the port groups and their respective granularity. SEQUENCE OF EtsysCosUserOrlrsUnitEntry .1.3.6.1.4.1.5624.1.2.55.1.9.3 |
etsysCosUserOrlrsUnitEntryConceptually defines a particular entry within the
etsysCosUserOrlrsUnitTable. Entries in this table indicate the port
group boundaries for the type of port specified. EtsysCosUserOrlrsUnitEntry .1.3.6.1.4.1.5624.1.2.55.1.9.3.1 |
etsysCosUserOrlrsUnitTypeIndexThe unit identifier for this port type. The metric at which
the etsysCosUserOrlrsUnitMinRate,
etsysCosUserOrlrsUnitMaxRate and
etsysCosUserOrlrsUnitGranularity are applied. EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.9.3.1.1 |
etsysCosUserOrlrsUnitMaxRateThe maximum rate supported at the rate of units specified by
etsysCosUserOrlrsUnitType.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.9.3.1.2 |
etsysCosUserOrlrsUnitMinRateThe minimum rate supported at the rate of units specified by
etsysCosUserOrlrsUnitType.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.9.3.1.3 |
etsysCosUserOrlrsUnitGranularityThe smallest unit by which a rate can be modified.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.9.3.1.4 |
etsysCosUserOrlrsPortGroupMaxEntriesThe maximum number of port groups supported by this agent.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.9.4 |
etsysCosUserOrlrsPortGroupNumEntriesThe number of assigned dot1dBridge port groups present in this
agent. This number also reflects the port groups with a
default system setup indicated by a zero(0) index.ro Gauge32 .1.3.6.1.4.1.5624.1.2.55.1.9.5 |
etsysCosUserOrlrsPortGroupLastChangeThe time at which the etsysCosUserOrlrsPortTypeTable was last
modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.9.6 |
etsysCosUserOrlrsPortGroupTableA table containing the settings for specific types of
dot1dBridge ports and their matching user rate limiting(or shaping)
configurations. SEQUENCE OF EtsysCosUserOrlrsPortGroupEntry .1.3.6.1.4.1.5624.1.2.55.1.9.7 |
etsysCosUserOrlrsPortGroupEntryConceptually defines a particular entry within the
etsysCosUserOrlrsPortTypeTable. Entries within this table MUST be
considered non-volatile and MUST be maintained across entity
resets. EtsysCosUserOrlrsPortGroupEntry .1.3.6.1.4.1.5624.1.2.55.1.9.7.1 |
etsysCosUserOrlrsPortGroupIndexThe user-specified port group for which the settings are
defined. This value MAY have meaning to the user for the
purposes of identifying groups of dot1dBridge ports with
similar function (uplink, user, etc).
A value of zero(0) has special meaning in that it identifies
the default port grouping of characteristics present in the
agent. Entries indexed by a zero have a max-access of
read-only. This value will have a system defined maximum of
etsysCosUserOrlrsPortGroupMaxEntries. Integer32 (0|1..32767) .1.3.6.1.4.1.5624.1.2.55.1.9.7.1.1 |
etsysCosUserOrlrsPortGroupRowStatusThis object allows for the dynamic creation and deletion
of entries within the etsysCosUserOrlrsPortGroupTable.
Entries within this table MUST be considered non-volatile
and MUST be maintained across entity resets.
When this object's value is active(1) the specified dot1dBridge
ports listed in the PortGroupList shall be removed from
UnselectedPorts.
A row in transition to the active(1) state will have its
port group list validated before activation. A port list that
cannot be made active MUST result in the row state to become
notReady(3) and no configuration action will be taken for this
row. Rows not in the active(1) state SHALL NOT be persisted
across entity resets and MUST return the ports from its
port group list to the etsysCosUserOrlrsPortTypeUnselectedPorts.
When this object's value is set to destroy(6) from an active(1)
state, all dot1dBridge ports contained in
etsysCosUserOrlrsPortGroupList shall be returned to the
etsysCosUserOrlrsPortTypeUnselectedPorts and all entries
referencing this row shall be removed as well.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.9.7.1.2 |
etsysCosUserOrlrsPortGroupListThe list of dot1dBridge ports to be assigned to this group.
Ports in this list MUST :
o Be mutually exclusive from other entries in this table
o Be comprised of the same port type as defined by the
etsysCosUserOrlrsPortTypeIndex.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.9.7.1.3 |
etsysCosUserOrlrsPortGroupNameThe administratively assigned textual description of this
port group.rw SnmpAdminString .1.3.6.1.4.1.5624.1.2.55.1.9.7.1.4 |
etsysCosUserOrlrsResourceTableA table containing the user rate limiting(or shaping) configurations
to be used in the entries specified. SEQUENCE OF EtsysCosUserOrlrsResourceEntry .1.3.6.1.4.1.5624.1.2.55.1.9.8 |
etsysCosUserOrlrsResourceEntryConceptually defines a particular entry within the
etsysCosUserOrlrsResourceTable. These entries contain the
specific attributes of policing rates (traffic clipping or shaping)
and parent rate limiter (or shaper). Entries within this table MUST be
considered non-volatile and MUST be maintained across entity
resets. EtsysCosUserOrlrsResourceEntry .1.3.6.1.4.1.5624.1.2.55.1.9.8.1 |
etsysCosUserOrlrsResourceUserOrlrsNumThe user rate limiter(or shaper) number associated with this entry. Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.9.8.1.1 |
etsysCosUserOrlrsResourceUnitsIdentifies the unit size for the etsysCosUserOrlrsPortRate.
Values MUST NOT exceed the capacity of the
etsysCosUserOrlrsPortType they are associated with.rw EtsysCosRateTypes .1.3.6.1.4.1.5624.1.2.55.1.9.8.1.2 |
etsysCosUserOrlrsResourceRateIdentifies the number of units above which packets will
considered in violation. This object is read-only for
limiters(or shapers) of type count(5). The value (0)
shall carry special meaning in this case of unset.
Rate Limiters(or Shapers) identified as having a value of (0)
shall not have this settings applied to the limiter(or shaper).rw Integer32 (0|1..2147483647) .1.3.6.1.4.1.5624.1.2.55.1.9.8.1.3 |
etsysCosUserOrlrsResourceParentUserOrlrsSetting this object to a positive value indicates the
etsysCosUserOrlrsResourceUserOrlrsNum to be used in
conjunction with this setting. A value of (-1) indicates the
parent UserRlRs is not configured.rw Integer32 .1.3.6.1.4.1.5624.1.2.55.1.9.8.1.4 |
etsysCosUserOrlrsResourceTypeThe characteristics applied to this rate limiter(or shaper).
When chaining is used, the AND / OR attribute denotes the
limiter(or shaper) logic in handling violation. For example,
option rePrioritizeAnd(2) requires that the current limiter AND
it's parent be violated for the packet to be reprioritized. The
rePrioritizeOr(3) option only needs one OR the other to be
violated for the action to be taken.rw EtsysRateLimitingType .1.3.6.1.4.1.5624.1.2.55.1.9.8.1.5 |
etsysCosUserOrlrsResourceActionCosIndexThis object will represent the CoS to be applied to packets
in violation of the limits set when the
etsysCosUserOrlrsResourceType is set to one of the
rePrioritize types.rw Integer32 .1.3.6.1.4.1.5624.1.2.55.1.9.8.1.6 |
etsysCosUserOrlrsResourceActionThis object allows syslog, SNMP traps, or disabling actions
to be taken when limiters (shapers) are first exceeded.rw EtsysViolationAction .1.3.6.1.4.1.5624.1.2.55.1.9.8.1.7 |
etsysCosUserOrlrsResourceViolationPortListThe dot1dBridge ports this limiter(or shaper) has been violated on.
Writing this object will clear the dot1dBridge ports given
which have a corresponding bit of zero (0) in the PortList.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.5624.1.2.55.1.9.8.1.8 |
etsysCosUserOrlrsResourceClearCountersThis object shall always read false(2). When set to true(1)
this object clears the counter associated with this entry, if
the associated entry is a limiter(or shaper) of type count(5).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.9.8.1.9 |
etsysCosUserOrlrsResourceModeThis object will represent the type of limiter or shaper that this
object is currently configured to.rw EtsysCosRlModes .1.3.6.1.4.1.5624.1.2.55.1.9.8.1.10 |
etsysCosUserOrlrsReferenceMappingMaxReferenceThe maximum number of etsysCosUserOrlrsReferences allowed in the
etsysCosUserOrlrsMappingTable.ro Unsigned32 .1.3.6.1.4.1.5624.1.2.55.1.9.9 |
etsysCosUserOrlrsReferenceMappingLastChangeThe time at which the etsysCosUserOrlrsReferenceMappingTable was
last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.9.10 |
etsysCosUserOrlrsReferenceMappingTableA table containing the user defined mappings of the
user rate limiter(or shaper) refences found in the etsysCosTable to
actual user rate limiters(or shapers) associated with the specified
port-group. SEQUENCE OF EtsysCosUserOrlrsReferenceMap .1.3.6.1.4.1.5624.1.2.55.1.9.11 |
etsysCosUserOrlrsReferenceMappingEntryConceptually defines a particular entry within the
etsysCosUserOrlrsReferenceMappingTable. Entries within this table
MUST be considered non-volatile and MUST be maintained across
entity resets. EtsysCosUserOrlrsReferenceMap .1.3.6.1.4.1.5624.1.2.55.1.9.11.1 |
etsysCosUserOrlrsResourceUserOrlrsNumberThe user rate limiter(or shaper) bound to this reference.rw Integer32 (-1|0..32767) .1.3.6.1.4.1.5624.1.2.55.1.9.11.1.1 |
etsysCosUserOrlrsViolationClearTableThis object SHALL always read false. Setting this object to
true removes all existing entries from the
etsysCosUserOrlrsViolationTable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.9.12 |
etsysCosUserOrlrsViolationLastChangeThe time at which the etsysCosUserOrlrsViolationTable was last
modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.9.13 |
etsysCosUserOrlrsViolationTableA table containing the list of entries of all users as classified by
etsysPolicyRules that have detected violations of the
limiters(or shapers) current settings. SEQUENCE OF EtsysCosUserOrlrsViolationEntry .1.3.6.1.4.1.5624.1.2.55.1.9.15 |
etsysCosUserOrlrsViolationEntryConceptually defines a particular entry within the
etsysCosUserOrlrsViolationTable. EtsysCosUserOrlrsViolationEntry .1.3.6.1.4.1.5624.1.2.55.1.9.15.1 |
etsysCosUserOrlrsViolationThis object represents the violation status for this
limiter(or shaper). If this object reads true(1) the action
associated with this UserOrlrs have been taken.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.5624.1.2.55.1.9.15.1.5 |
etsysCosUserOrlrsCounterIn order for this object to have meaningful information the
assigned limiter must be set up as a counter type limiter.
This value shall then represent the number of configured units
the limiter has recorded. If the associated limiter
is of type pps(0) then the object represents the packets
counted, otherwise it represents the octets counted.ro Counter64 .1.3.6.1.4.1.5624.1.2.55.1.9.15.1.6 |
etsysCosUserOrlrsResetFlagsThis value shall always read as 0. This object clears the
statistics gathering portion of this entry. If bit 0 is set,
the etsysCosUserOrlrsViolation TruthValue will be reset to false. If
bit 1 is set, the etsysCosUserOrlrsUnitCounter will be reset to zero.
Both bits set shall clear both properties.rw EtsysRateLimitResetBits .1.3.6.1.4.1.5624.1.2.55.1.9.15.1.7 |
etsysCosConformance OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.55.2 |
etsysCosGroups OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.55.2.1 |
etsysCosCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.5624.1.2.55.2.2 |