ENDACE-HWMON-MIB
The ENDACE-HWMON-MIB facilitates SNMP-based monitoring of Endace Probe hardware environmental and operational parameters, specifically tracking temperature, fan status, voltage levels, and power supply states to ensure device reliability.
Imported Objects
Objects
19 total| Object Name |
|---|
hwmonMIBEndace Probe Hardware Monitoring. MODULE-IDENTITY .1.3.6.1.4.1.18418.16 |
hwmonNotificationsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.18418.16.0 |
hwmonFanFaultIndicates that at least one fan has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.18418.16.0.1 |
hwmonFanNormalIndicates that all fans operate normally. NOTIFICATION-TYPE .1.3.6.1.4.1.18418.16.0.2 |
hwmonPSUFaultIndicates that at least one power supply has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.18418.16.0.3 |
hwmonPSUNormalIndicates that all power supplies operate normally. NOTIFICATION-TYPE .1.3.6.1.4.1.18418.16.0.4 |
hwmonIntrusionAlarmIndicates that the chassis was opened. NOTIFICATION-TYPE .1.3.6.1.4.1.18418.16.0.5 |
hwmonIntrusionNormalIndicates that the chassis was closed. NOTIFICATION-TYPE .1.3.6.1.4.1.18418.16.0.6 |
hwmonSystemTempHighIndicates that the system temperature is above the set upper threshold. See EndaceProbe 'Statistics Reports and Alarms' page for details. NOTIFICATION-TYPE .1.3.6.1.4.1.18418.16.0.7 |
hwmonSystemTempNormalIndicates that the system temperature is within a normal operating range. See EndaceProbe 'Statistics Reports and Alarms' page for details. NOTIFICATION-TYPE .1.3.6.1.4.1.18418.16.0.8 |
hwmonSystemTempLowIndicates that the system temperature is below the set lower threshold. See EndaceProbe 'Statistics Reports and Alarms' page for details. NOTIFICATION-TYPE .1.3.6.1.4.1.18418.16.0.9 |
hwmonObjectsManaged object of the hardware monitoring module. OBJECT IDENTIFIER .1.3.6.1.4.1.18418.16.1 |
hwmonFanRedundancyIndicates that all fans are OK.ro Enumeration .1.3.6.1.4.1.18418.16.1.1 |
hwmonPsuRedundancyIndicates that all Power Supply Units are OK.ro Enumeration .1.3.6.1.4.1.18418.16.1.2 |
hwmonIntrusionStatusA False value (0) indicates that the Chassis Intrusion sensor is in a normal state and that the chassis is closed. If the chassis is opened, the value is True (1).ro Enumeration .1.3.6.1.4.1.18418.16.1.3 |
hwmonSystemTempSystem temperature measured at air inlet or front panel in degrees C.ro Integer32 .1.3.6.1.4.1.18418.16.1.4 |
hwmonConformance OBJECT IDENTIFIER .1.3.6.1.4.1.18418.16.2 |
hwmonObjectGroupIncludes all hardware monitor objects. Unknown .1.3.6.1.4.1.18418.16.2.1 |
hwmonNotifyGroupContains all hardware monitoring notifications. Unknown .1.3.6.1.4.1.18418.16.2.2 |
More MIBs from Endace Technology
Browse all Endace TechnologyMIBs →The ENDACE-SYSTEM-MIB provides SNMP access to monitor Endace hardware and software resources, specifically tracking CPU utilization, process management status, mounted volume states, and the configuration of the Central Management Controller (CMC). This module enables the observation of system-level health indicators and hardware-dependent components, such as RAID arrays, subject to the specific product configuration and available physical resources.
The ENDACE-MODULE-MIB provides SNMP access to monitor the operational status, health metrics, and configuration parameters of DAG (Data Acquisition) hardware modules within Endace network traffic analysis appliances. It enables administrators to track critical device-level indicators such as module state, packet capture statistics, and hardware faults for the Endace "Shogun" platform.
The ENDACE-ERFSTREAM-MIB facilitates SNMP-based event notification and monitoring for Endace Data Pipe applications, specifically tracking the status and flow metrics of Ethernet Record Format (ERF) packet capture streams. This module enables administrators to observe real-time data ingestion states, stream availability, and buffer conditions within Endace's high-speed network analysis hardware.
The ENDACE-STREAM-MIB facilitates the monitoring and management of Endace DAG Stream interfaces, enabling the collection of high-fidelity packet capture statistics and interface performance counters for network traffic analysis.
The ENDACE-HBA-MIB module provides SNMP access to monitor and manage the operational status, performance counters, and configuration parameters of Endace Host Bus Adapters (HBAs). It exposes specific metrics including interface statistics, link state transitions, and hardware health indicators essential for validating data capture integrity on Endace deployment appliances.
The ENDACE-INVMGR-MIB provides SNMP access to monitor and manage the Investigation Manager Appliance, specifically exposing metrics related to network traffic capture sources, packet buffer utilization, and system health status for forensic data collection operations.