EMD-MIB
This MIB describes the SNMP functions of the EMX Environmental Monitoring Device by Raritan Computer.
Main OID:
raritan.1.3.6.1.4.1.13742
187
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
187 total| Object Name |
|---|
raritanThis MIB describes the SNMP functions of the
EMX Environmental Monitoring Device by Raritan Computer. MODULE-IDENTITY .1.3.6.1.4.1.13742 |
emd OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8 |
traps OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.0 |
trapInformation OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.0.0 |
userNameThe user currently logged in.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.0.0.1 |
targetUserThe user added, deleted, or modified.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.0.0.2 |
imageVersionThe version of the upgrade image.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.0.0.3 |
roleNameThe role added, deleted, or modified.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.0.0.4 |
smtpMessageRecipientsComma separated list of SMTP Message recipientsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.0.0.5 |
smtpServerThe IP address/host name of the SMTP serverro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.0.0.6 |
oldSensorStateThe old sensor state used in
Sensor State Transition traps.ro SensorStateEnumeration .1.3.6.1.4.1.13742.8.0.0.7 |
externalSensorNumberA unique value for each sensor. Its value
ranges between 1 and the value of
externalSensorCount.ro Integer32 .1.3.6.1.4.1.13742.8.0.0.8 |
typeOfSensorThe type of sensor.ro SensorTypeEnumeration .1.3.6.1.4.1.13742.8.0.0.9 |
errorDescriptionDescription of the Errorro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.0.0.10 |
deviceChangedParameterDescription of the parameter(s) that changed.ro DeviceIdentificationParameterEnumeration .1.3.6.1.4.1.13742.8.0.0.11 |
changedParameterNewValueThe new value of the changed parameterro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.0.0.12 |
lhxSupportEnabledThe new enabled state for Schroff LHX Support.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13742.8.0.0.13 |
webcamModelThe model of the Webcamro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.0.0.14 |
webcamConnectionPortThe port to which the Webcam is connectedro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.0.0.15 |
peripheralDeviceRomcodeThe Romcode of an peripheral devicero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.0.0.16 |
peripheralDeviceFirmwareUpdateStateThe firmware update state of an peripheral devicero PeripheralDeviceFirmwareUpdateStateEnumeration .1.3.6.1.4.1.13742.8.0.0.17 |
agentInetPortNumberThe UDP port number used for accessing
the SNMP agent on the device.
Examples:
If deviceCascadeType is portForwarding, then
master: 50500
slave 1:50501
slave 2: 50502
......
If cascading mode is not portForwarding and default
(Standard) ports are being used, then port: 161ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.13742.8.0.0.18 |
phoneNumberThe phone number of e.g. an SMS receiver.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.0.0.19 |
systemStartedThe system has started. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.1 |
systemResetThe system was reset. The conditions under which
this trap is sent include, but are not limited
to, the following.
using the GUI - Maintenance->Reset Unit
using the CLI - reset emd unit NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.2 |
userLoginA user logged in. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.3 |
userLogoutA user logged out. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.4 |
userAuthenticationFailureA user authentication attempt failed. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.5 |
userSessionTimeoutA user timed out from the device. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.6 |
userAddedA user was added to the system. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.7 |
userModifiedA user account was modified. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.8 |
userDeletedA user was deleted from the system. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.9 |
roleAddedA role was added to the system. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.10 |
roleModifiedA role was modified. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.11 |
roleDeletedA role was deleted from the system. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.12 |
deviceUpdateStartedThe device update has started. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.13 |
deviceUpdateCompletedThe device update has completed. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.14 |
userBlockedA blocked user tried to log in. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.15 |
userPasswordChangedUser password was changed. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.16 |
passwordSettingsChangedStrong password settings changed. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.17 |
firmwareValidationFailedFirmware validation failed. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.18 |
logFileClearedThe log file has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.19 |
bulkConfigurationSavedBulk Configuration saved. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.20 |
bulkConfigurationCopiedBulk Configuration saved. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.21 |
externalSensorStateChangeExternal Sensor State Change. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.22 |
smtpMessageTransmissionFailureSMTP message transmission failure NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.23 |
ldapErrorLDAP Error occurred; errorDescription describes
the error NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.24 |
deviceUpdateFailedThe device update has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.25 |
pingServerEnabledThe ping feature has been enabled NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.26 |
pingServerDisabledThe ping feature has been disabled NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.27 |
serverNotReachableThe server is not reachable NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.28 |
serverReachableThe server is reachable NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.29 |
deviceIdentificationChangedDevice identification has changed NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.30 |
usbSlaveConnectedUSB Connectivity to slave has been established NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.31 |
usbSlaveDisconnectedUSB Connectivity to slave has been lost NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.32 |
lhxSupportChangedThe Schroff LHX Support changed to state 'lhxSupportEnabled'. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.33 |
userAcceptedRestrictedServiceAgreementThe user accepted the Restricted Service Agreement. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.34 |
userDeclinedRestrictedServiceAgreementThe user declined the Restricted Service Agreement. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.35 |
deviceSettingsSavedDevice Settings have been saved. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.36 |
deviceSettingsRestoredDevice Settings have been restored. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.37 |
webcamInsertedA webcam has been inserted NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.38 |
webcamRemovedA webcam has been removed NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.39 |
serverConnectivityUnrecoverableThe connection to the server could not be recovered NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.40 |
radiusErrorLDAP Error occurred; errorDescription describes the error NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.41 |
serverReachabilityErrorServer Reachability Error occurred; errorDescription describes the error.
This trap is sent when the Error state is entered.
Reasons for transitioning to the Error state include the following:
Unable to resolve the server hostname. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.42 |
unknownPeripheralDeviceAttachedAn unknown peripheral device was attached. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.43 |
peripheralDeviceFirmwareUpdateThe firmware update state of a peripheral device changed while
performing update to peripheralDevicePackageFirmwareVersion. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.44 |
smsMessageTransmissionFailureSending an SMS message failed. NOTIFICATION-TYPE .1.3.6.1.4.1.13742.8.0.45 |
configuration OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.1 |
unit OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.1.1 |
unitConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.1.1.1 |
deviceNameThe user-defined name for the EMD.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.1.1.1 |
hardwareVersionThe main boards hardware version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.1.1.2 |
firmwareVersionThe firmware version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.1.1.3 |
utcOffsetThe current UTC offset.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.1.1.4 |
externalSensorCountThe number of external sensors.ro Integer32 .1.3.6.1.4.1.13742.8.1.1.1.5 |
managedExternalSensorCountThe number of managed external sensorsro Integer32 .1.3.6.1.4.1.13742.8.1.1.1.6 |
externalSensorsZCoordinateUnitsExternal Sensor Z Coordinate units:
Freeform Text or Rack Units (U).
Default is U.rw ExternalSensorsZCoordinateUnitsEnumeration .1.3.6.1.4.1.13742.8.1.1.1.7 |
deviceMACAddressThe current MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.1.1.8 |
deviceInetAddressTypeThe type of address formatro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.13742.8.1.1.1.9 |
deviceInetIPAddressThe current IP address. A value of 0.0.0.0
indicates an error or an unset option.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.13742.8.1.1.1.10 |
deviceInetNetmaskThe current netmask. A value of 0.0.0.0 indicates
an error or an unset option.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.13742.8.1.1.1.11 |
deviceInetGatewayThe current gateway. A value of 0.0.0.0 indicates
an error or an unset option.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.13742.8.1.1.1.12 |
serverCountThe number of entries in serverReachabilityTablero Integer32 .1.3.6.1.4.1.13742.8.1.1.1.13 |
modelThe EMD device model.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.1.1.14 |
cascadedDeviceConnectedIndicates whether a device is connected using an USB cable to
the USB-A port of this EMX in a cascaded configuration.
true: Connected
false: Not Connectedro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.1.1.15 |
peripheralDevicesAutoManagementSet enabled state of auto management for new peripheral devices.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.1.1.16 |
synchronizeWithNTPServerSet enabled state of the device's NTP client.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.1.1.17 |
useDHCPProvidedNTPServerEnable usage of the DHCP/BOOTP provided NTP server addresses;
the value is used only if synchronizeWithNTPServer is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.1.1.18 |
firstNTPServerAddressTypeRepresents the type of firstNTPServerAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.13742.8.1.1.1.19 |
firstNTPServerAddressThe address of the primary NTP server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.13742.8.1.1.1.20 |
secondNTPServerAddressTypeRepresents the type of secondNTPServerAddress.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.13742.8.1.1.1.21 |
secondNTPServerAddressThe address of the secondary NTP server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.13742.8.1.1.1.22 |
logConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.1.1.2 |
dataLoggingData Retrieval: enabled/disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.1.2.1 |
measurementPeriodData Collection periodicity. This is the periodicity of the data collected by the PX.
This value is fixed at 1 second.ro Integer32 .1.3.6.1.4.1.13742.8.1.1.2.2 |
measurementsPerLogEntryThe number of measurements used for each entry in the log.rw Integer32 .1.3.6.1.4.1.13742.8.1.1.2.3 |
logSizeThe number of entries in the log.ro Integer32 .1.3.6.1.4.1.13742.8.1.1.2.4 |
dataLoggingEnableForAllSensorsOperation to control data logging for all sensors.
If this OID is set to true, then all xxxSensorLogAvailable are set to true
If this OID is set to false, then all xxxSensorLogAvailable are set to falserw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.1.2.5 |
externalSensors OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.1.2 |
externalSensorConfigurationTableA list of externalSensor configuration entries. The number of
entries is given by the value of externalSensorCount for the EMD. SEQUENCE OF ExternalSensorConfigurationEntryStruct .1.3.6.1.4.1.13742.8.1.2.1 |
externalSensorConfigurationEntryAn entry containing parameters for an external sensor. ExternalSensorConfigurationEntryStruct .1.3.6.1.4.1.13742.8.1.2.1.1 |
sensorIDA unique value for each sensor. Its value
ranges between 1 and the value of externalSensorCount. Integer32 .1.3.6.1.4.1.13742.8.1.2.1.1.1 |
externalSensorTypeThe type of sensor.ro SensorTypeEnumeration .1.3.6.1.4.1.13742.8.1.2.1.1.2 |
externalSensorSerialNumberThe sensor serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.2.1.1.3 |
externalSensorNameThe user-defined name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.2.1.1.4 |
externalSensorDescriptionThe user-defined description.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.2.1.1.5 |
externalSensorXCoordinateThe X coordinate.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.2.1.1.6 |
externalSensorYCoordinateThe Y coordinate.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.2.1.1.7 |
externalSensorZCoordinateThe Z coordinate.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.2.1.1.8 |
externalSensorChannelNumberThe channel number, applies only to contact sensors;
-1 for other sensorsro Integer32 .1.3.6.1.4.1.13742.8.1.2.1.1.9 |
externalOnOffSensorSubtypeType of measurement in case sensor type is discrete OnOffrw SensorTypeEnumeration .1.3.6.1.4.1.13742.8.1.2.1.1.10 |
externalSensorUnitsThe base units.
This parameter does not apply to onOff, trip, vibration,
waterDetection, smokeDetection sensors.ro SensorUnitsEnumeration .1.3.6.1.4.1.13742.8.1.2.1.1.11 |
externalSensorDecimalDigitsThe number of digits displayed to the right of the decimal point
This parameter does not apply
to onOff, trip, vibration, waterDetection,
smokeDetection sensors.ro Unsigned32 .1.3.6.1.4.1.13742.8.1.2.1.1.12 |
externalSensorAccuracyThe accuracy: how close (in percent) the measurement
is to the actual value.
This parameter does not apply
to onOff, trip, vibration, waterDetection,
smokeDetection sensors.ro HundredthsOfAPercentage .1.3.6.1.4.1.13742.8.1.2.1.1.13 |
externalSensorResolutionThe resolution: the minimum difference between any two measured
values. The value of this OID variable should be scaled by
externalSensorDecimalDigits. For example, if the value is 1 and
externalSensorDecimalDigits is 2, then actual value is 0.01.
This parameter does not apply
to onOff, trip, vibration, waterDetection,
smokeDetection sensors.ro Unsigned32 .1.3.6.1.4.1.13742.8.1.2.1.1.14 |
externalSensorToleranceThe resolution: the difference between a sensor value and the
actual value. The value of this OID variable should be scaled by
(externalSensorDecimalDigits + 1).
For example, if the value is 50 and
externalSensorDecimalDigits is 2, then actual value is 0.05.
This parameter does not apply
to onOff, trip, vibration, waterDetection,
smokeDetection sensors.ro Unsigned32 .1.3.6.1.4.1.13742.8.1.2.1.1.15 |
externalSensorMaximumThe largest possible value
The value of this OID variable should be scaled by
externalSensorDecimalDigits. For example, if the value is 1 and
externalSensorDecimalDigits is 2, then actual value is 0.01.
This parameter does not apply
to onOff, trip, vibration, waterDetection,
smokeDetection sensors.ro Integer32 .1.3.6.1.4.1.13742.8.1.2.1.1.16 |
externalSensorMinimumThe smallest possible value
The value of this OID variable should be scaled by
externalSensorDecimalDigits. For example, if the value is 1 and
externalSensorDecimalDigits is 2, then actual value is 0.01.
This parameter does not apply
to onOff, trip, vibration, waterDetection,
smokeDetection sensors.ro Integer32 .1.3.6.1.4.1.13742.8.1.2.1.1.17 |
externalSensorHysteresisThe hysteresis used for deassertions
The value of this OID variable should be scaled by
externalSensorDecimalDigits. For example, if the value is 1 and
externalSensorDecimalDigits is 2, then actual value is 0.01.
This parameter does not apply
to onOff, trip, vibration, waterDetection,
smokeDetection sensors.rw Unsigned32 .1.3.6.1.4.1.13742.8.1.2.1.1.18 |
externalSensorStateChangeDelayThe delay measured in samples before a state is asserted.
If the value is zero, then the state is asserted as soon as
it is detected; if it is non-zero, say n, then the assertion
condition must exist for n+1 consecutive samples before the
corresponding assertion event is reported.
At present, this value cannot be written (set)rw Unsigned32 .1.3.6.1.4.1.13742.8.1.2.1.1.19 |
externalSensorLowerCriticalThresholdThe lower critical threshold
The value of this OID variable should be scaled by
externalSensorDecimalDigits. For example, if the value is 1 and
externalSensorDecimalDigits is 2, then actual value is 0.01.
This parameter does not apply
to onOff, trip, vibration, waterDetection,
smokeDetection sensors.rw Integer32 .1.3.6.1.4.1.13742.8.1.2.1.1.20 |
externalSensorLowerWarningThresholdThe lower non-critical (warning) threshold
The value of this OID variable should be scaled by
externalSensorDecimalDigits. For example, if the value is 1 and
externalSensorDecimalDigits is 2, then actual value is 0.01.
This parameter does not apply
to onOff, trip, vibration, waterDetection,
smokeDetection sensors.rw Integer32 .1.3.6.1.4.1.13742.8.1.2.1.1.21 |
externalSensorUpperCriticalThresholdThe upper critical threshold
The value of this OID variable should be scaled by
externalSensorDecimalDigits. For example, if the value is 1 and
externalSensorDecimalDigits is 2, then actual value is 0.01.
This parameter does not apply
to onOff, trip, vibration, waterDetection,
smokeDetection sensors.rw Integer32 .1.3.6.1.4.1.13742.8.1.2.1.1.22 |
externalSensorUpperWarningThresholdThe upper non-critical (warning) threshold
The value of this OID variable should be scaled by
externalSensorDecimalDigits. For example, if the value is 1 and
externalSensorDecimalDigits is 2, then actual value is 0.01.
This parameter does not apply
to onOff, trip, vibration, waterDetection,
smokeDetection sensors.rw Integer32 .1.3.6.1.4.1.13742.8.1.2.1.1.23 |
externalSensorEnabledThresholdsA bit string which indicates which thresholds are enabled.
This parameter does not apply
to onOff, trip, vibration, waterDetection,
smokeDetection sensorsrw Bits .1.3.6.1.4.1.13742.8.1.2.1.1.24 |
externalSensorPortThe position of the sensor.
The format is a semicolon separated list of Keyword:value pairs -
Keyword1:Value1;Keyword2:value2;...
Keyword can be one of the following:
ONBOARD, DEVICE-1WIREPORT, HUBPORT, CHAIN-POSITION
Examples
1) Onboard Sensor
ONBOARD:CC1
2) Old sensor connected to device 1-wire port
DEVICE-1WIREPORT:2
3) New style sensor connected to device 1-wire port
DEVICE-1WIREPORT:2;CHAIN-POSITION:3
4) New style sensor connected to hub port 3
DEVICE-1WIREPORT:2;CHAIN-POSITION:1;HUBPORT:3;CHAIN-POSITION:1
5) Old style sensor connected to end of new style sensor chain
DEVICE-1WIREPORT:2;ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.2.1.1.25 |
externalSensorIsActuatorIs this an actuator?
True: It is an actuator
False: It is not an actuatorro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.2.1.1.26 |
externalSensorAlarmedToNormalDelayThe delay in seconds for transitions from the alarmed state to the normal state.
If the sensor type is motionDetection,
then it can set to a value greater >= 0
For all other sensor types,
the value is 0 and cannot be set to any other value.rw Integer32 .1.3.6.1.4.1.13742.8.1.2.1.1.27 |
externalSensorUseDefaultThresholdsUse default thresholds for this sensor?
True: Use default thresholds for this sensor
False: Do not use default thresholds for this sensorrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.2.1.1.28 |
externalSensorTypeDefaultThresholdsTableA list of entries listing the default thresholds for each sensor type. SEQUENCE OF ExternalSensorTypeDefaultThresholdsEntryStruct .1.3.6.1.4.1.13742.8.1.2.4 |
externalSensorTypeDefaultThresholdsEntryAn entry containing default thresholds for a sensor type. ExternalSensorTypeDefaultThresholdsEntryStruct .1.3.6.1.4.1.13742.8.1.2.4.1 |
externalSensorTypeDefaultHysteresisThe hysteresis used for deassertions
The value of this OID variable should be scaled by
externalSensorDecimalDigits. For example, if the value is 1 and
externalSensorDecimalDigits is 2, then actual value is 0.01.
This parameter does not apply to onOff, trip, vibration,
waterDetection, smokeDetection sensors.rw Unsigned32 .1.3.6.1.4.1.13742.8.1.2.4.1.3 |
externalSensorTypeDefaultStateChangeDelayThe delay measured in samples before a state is asserted.
If the value is zero, then the state is asserted as soon as
it is detected; if it is non-zero, say n, then the assertion
condition must exist for n+1 consecutive samples before the
corresponding assertion event is reported.
At present, this value cannot be written (set)rw Unsigned32 .1.3.6.1.4.1.13742.8.1.2.4.1.4 |
externalSensorTypeDefaultLowerCriticalThresholdThe lower critical threshold
The value of this OID variable should be scaled by
externalSensorDecimalDigits. For example, if the value is 1 and
externalSensorDecimalDigits is 2, then actual value is 0.01.
This parameter does not apply to onOff, trip, vibration,
waterDetection, smokeDetection sensors.rw Integer32 .1.3.6.1.4.1.13742.8.1.2.4.1.5 |
externalSensorTypeDefaultLowerWarningThresholdThe lower non-critical (warning) threshold
The value of this OID variable should be scaled by
externalSensorDecimalDigits. For example, if the value is 1 and
externalSensorDecimalDigits is 2, then actual value is 0.01.
This parameter does not apply to onOff, trip, vibration,
waterDetection, smokeDetection sensors.rw Integer32 .1.3.6.1.4.1.13742.8.1.2.4.1.6 |
externalSensorTypeDefaultUpperCriticalThresholdThe upper critical threshold
The value of this OID variable should be scaled by
externalSensorDecimalDigits. For example, if the value is 1 and
externalSensorDecimalDigits is 2, then actual value is 0.01.
This parameter does not apply to onOff, trip, vibration,
waterDetection, smokeDetection sensors.rw Integer32 .1.3.6.1.4.1.13742.8.1.2.4.1.7 |
externalSensorTypeDefaultUpperWarningThresholdThe upper non-critical (warning) threshold
The value of this OID variable should be scaled by
externalSensorDecimalDigits. For example, if the value is 1 and
externalSensorDecimalDigits is 2, then actual value is 0.01.
This parameter does not apply to onOff, trip, vibration,
waterDetection, smokeDetection sensors.rw Integer32 .1.3.6.1.4.1.13742.8.1.2.4.1.8 |
externalSensorTypeDefaultEnabledThresholdsA bit string which indicates which thresholds are enabled.
This parameter does not apply to onOff, trip, vibration,
waterDetection, smokeDetection sensorsrw Bits .1.3.6.1.4.1.13742.8.1.2.4.1.9 |
peripheralDevicePackageTableA list of entries for the peripheral Device Packages connected to
an EMX. The number of entries is given by the value of
peripheralDevicePackagesCount. SEQUENCE OF PeripheralDevicePackageEntryStruct .1.3.6.1.4.1.13742.8.1.2.5 |
peripheralDevicePackageEntryAn entry containing objects for a controller. PeripheralDevicePackageEntryStruct .1.3.6.1.4.1.13742.8.1.2.5.1 |
peripheralDevicePackageIdA unique value for each peripheral device package. Integer32 .1.3.6.1.4.1.13742.8.1.2.5.1.1 |
peripheralDevicePackageSerialNumberThe peripheral device package serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.2.5.1.3 |
peripheralDevicePackageModelThe peripheral device package model.
Examples are DX-D2C6, DPX2-T1, DPX2-T1H1, DPX2-T2H1, DPX2-T3H1ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.2.5.1.4 |
peripheralDevicePackageFirmwareVersionThe peripheral device package firmware version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.2.5.1.5 |
peripheralDevicePackageMinFirmwareVersionThe peripheral device package minimum firmware version.
This field may be empty. If it is not empty, then it shall not be
possible to downgrade the peripheral device firmware to a
version < minimum firmware version number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.2.5.1.6 |
peripheralDevicePackageFirmwareTimeStampThe time when the peripheralDevicePackage firmware was updated in
UNIX(epoch)time.
It is measured in seconds relative to January 1, 1970 (midnight UTC/GMT),
i.e a value of 0 indicates January 1, 1970 (midnight UTC/GMT).ro Unsigned32 .1.3.6.1.4.1.13742.8.1.2.5.1.7 |
peripheralDevicePackagePositionThe position of the package.
The format is a semicolon separated list of Keyword:value pairs -
Keyword1:Value1;Keyword2:value2;...
Keyword can be one of the following:
ONBOARD, DEVICE-1WIREPORT, HUBPORT, CHAIN-POSITION
Examples
1) Onboard Sensor
ONBOARD:CC1
2) Old sensor connected to device 1-wire port
DEVICE-1WIREPORT:2
3) New style sensor connected to device 1-wire port
DEVICE-1WIREPORT:2;CHAIN-POSITION:3
4) New style sensor connected to hub port 3
DEVICE-1WIREPORT:2;CHAIN-POSITION:1;HUBPORT:3;CHAIN-POSITION:1
5) Old style sensor connected to end of new style sensor chain
DEVICE-1WIREPORT:2;ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.2.5.1.8 |
peripheralDevicePackageStateThe state of the package.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.2.5.1.9 |
serverReachability OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.1.3 |
serverReachabilityTableA list of server entries. The number of
entries is given by the value of serverCount for the EMD. SEQUENCE OF ServerReachabilityEntryStruct .1.3.6.1.4.1.13742.8.1.3.1 |
serverReachabilityEntryAn entry containing parameters for a server. ServerReachabilityEntryStruct .1.3.6.1.4.1.13742.8.1.3.1.1 |
serverIDA unique value for each server. Its value
ranges between 1 and the value of serverCount for that EMD Integer32 .1.3.6.1.4.1.13742.8.1.3.1.1.1 |
serverIPAddressThe IP Address/host name of the serverro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.3.1.1.2 |
serverPingEnabledIs ping enabled for this server?rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13742.8.1.3.1.1.3 |
measurements OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.2 |
measurementsExternalSensor OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.2.1 |
externalSensorMeasurementsTableA list of external sensor entries. The number of
entries is given by the value of externalSensorCount
for the EMD. SEQUENCE OF ExternalSensorMeasurementsEntryStruct .1.3.6.1.4.1.13742.8.2.1.1 |
externalSensorMeasurementsEntryAn entry containing measurement objects for an external sensor. ExternalSensorMeasurementsEntryStruct .1.3.6.1.4.1.13742.8.2.1.1.1 |
measurementsExternalSensorIsAvailableIs the sensor available?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13742.8.2.1.1.1.1 |
measurementsExternalSensorStateThe sensor state.ro SensorStateEnumeration .1.3.6.1.4.1.13742.8.2.1.1.1.2 |
measurementsExternalSensorValueThe sensor reading.
This parameter does not apply
to onOff, trip, vibration, waterDetection,
smokeDetection sensors.ro Integer32 .1.3.6.1.4.1.13742.8.2.1.1.1.3 |
measurementsExternalSensorTimeStampThe sensor reading timestamp.ro Unsigned32 .1.3.6.1.4.1.13742.8.2.1.1.1.4 |
conformance OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.3 |
compliances OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.3.1 |
groups OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.3.2 |
log OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.4 |
logUnit OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.4.1 |
oldestLogIDThe index of the oldest data in the buffer for this EMD.ro Integer32 .1.3.6.1.4.1.13742.8.4.1.1 |
newestLogIDThe index of the newest data in the buffer for this EMD.ro Integer32 .1.3.6.1.4.1.13742.8.4.1.2 |
logTimeStampTableA list of entries containing the timestamps of the entries in the log. SEQUENCE OF LogTimeStampEntryStruct .1.3.6.1.4.1.13742.8.4.1.3 |
logTimeStampEntryAn entry containing the timestamp for log entries. LogTimeStampEntryStruct .1.3.6.1.4.1.13742.8.4.1.3.1 |
logIndexA unique value for each entry in the log. Its value
ranges between 1 and the value of logSize. Integer32 .1.3.6.1.4.1.13742.8.4.1.3.1.1 |
logTimeStampThe time when the data was collected. It is measured in seconds relative to
January 1, 1970 (midnight UTC/GMT), i.e a value of 0 indicates
January 1, 1970 (midnight UTC/GMT).ro Unsigned32 .1.3.6.1.4.1.13742.8.4.1.3.1.2 |
logExternalSensor OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.4.2 |
externalSensorLogTableA list of external sensor entries. The number of
entries is given by the value of externalSensorCount for the EMD. SEQUENCE OF ExternalSensorLogEntryStruct .1.3.6.1.4.1.13742.8.4.2.1 |
externalSensorLogEntryAn entry containing log objects for an external sensor. ExternalSensorLogEntryStruct .1.3.6.1.4.1.13742.8.4.2.1.1 |
logExternalSensorDataAvailableIs data available for this sensor during this measurement period?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13742.8.4.2.1.1.2 |
logExternalSensorStateThe sensor state.ro SensorStateEnumeration .1.3.6.1.4.1.13742.8.4.2.1.1.3 |
logExternalSensorAvgValueThe sensor reading average value.ro Integer32 .1.3.6.1.4.1.13742.8.4.2.1.1.4 |
logExternalSensorMaxValueThe sensor reading maximum value.ro Integer32 .1.3.6.1.4.1.13742.8.4.2.1.1.5 |
logExternalSensorMinValueThe sensor reading minimum value.ro Integer32 .1.3.6.1.4.1.13742.8.4.2.1.1.6 |
control OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.5 |
actuatorControl OBJECT IDENTIFIER .1.3.6.1.4.1.13742.8.5.1 |
actuatorControlTableA list of actuators for an EMX. SEQUENCE OF ActuatorControlEntryStruct .1.3.6.1.4.1.13742.8.5.1.1 |
actuatorControlEntryAn entry for implementing user-initiated state changes for an actuator. ActuatorControlEntryStruct .1.3.6.1.4.1.13742.8.5.1.1.1 |
actuatorStateThe actuator state.
A Get operation retrieves the state of the actuator.
A Set operation changes the stae of the sensor.
The valid states for set operations are on and Off.
Attempting to set the state to any other value will generate an error.rw SensorStateEnumeration .1.3.6.1.4.1.13742.8.5.1.1.1.1 |