ELTEX-MES-LINKAGG-MIB
The ELTEX-MES-LINKAGG-MIB enables monitoring and management of IEEE 802.3ad (LACP) link aggregation groups on ELTEX MES series network switches, exposing specific metrics such as aggregate interface status, member port states, LACP system priority, and operational mode configurations.
Imported Objects
Objects
10 total| Object Name |
|---|
eltMesLagMIBThe Link Aggregation module IEEE 802.3ad extension. MODULE-IDENTITY .1.3.6.1.4.1.35265.1.23.9.1 |
eltMesLagMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.35265.1.23.9.1.1 |
eltMesLinkAggGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.35265.1.23.9.1.1.1 |
eltMesLinkAggPort OBJECT IDENTIFIER .1.3.6.1.4.1.35265.1.23.9.1.1.2 |
eltAggPortTableA table that contains Link Aggregation Control
configuration information about every
Aggregation Port associated with this device.
A row appears in this table for each physical port. SEQUENCE OF EltAggPortEntry .1.3.6.1.4.1.35265.1.23.9.1.1.2.1 |
eltAggPortEntryA list of Link Aggregation Control configuration
parameters for each Aggregation Port on this device. EltAggPortEntry .1.3.6.1.4.1.35265.1.23.9.1.1.2.1.1 |
eltAggPortPassiveThis value indicates wether port is LACP passive or activerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.35265.1.23.9.1.1.2.1.1.1 |
eltAggBalanceTableA table that contains Eltex extension of balansing criterion used
for the corresponding dot3adAggIndex. SEQUENCE OF EltAggBalanceEntry .1.3.6.1.4.1.35265.1.23.9.1.1.2.2 |
eltAggBalanceEntryA list of information for each dot3adAggIndex. EltAggBalanceEntry .1.3.6.1.4.1.35265.1.23.9.1.1.2.2.1 |
eltAggBalanceMplsAwareIf this value is TRUE, IP over MPLS traffic will be treated as IP
traffic instead of as non-IP. Note that this setting will affect all
device services, not only load balancing. Can't be TRUE if
rlDot3adAggBalanceLayer equals 2.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.35265.1.23.9.1.1.2.2.1.1 |
More MIBs from Eltex Enterprise
Browse all Eltex EnterpriseMIBs →The ELTEX-LTE8ST MIB module provides SNMP-based monitoring and management capabilities for ELTEX LTE-8ST cellular routers, exposing critical operational metrics such as cellular interface status, signal strength (RSRP/RSRQ), network registration states, and active data session statistics.
SNMP MIB module
SNMP MIB module
SNMP MIB module
SNMP MIB module
The ELTEX-SMI-ACTUAL module provides the foundational Structure of Management Information (SMI) definitions for Eltex Networks hardware, enabling the monitoring of device-specific operational metrics such as interface statistics, system resources, and environmental sensors via SNMP. It serves as the core schema required for network management systems to interpret and collect telemetry data from Eltex switches, routers, and access points.