ELAN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ELAN-MIB.
112
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
112 total| Object Name |
|---|
atmForum OBJECT IDENTIFIER .1.3.6.1.4.1.353 |
RFC1213-MIB Unknown .1.3.6.1.4.1.353 |
atmForumNetworkManagement OBJECT IDENTIFIER .1.3.6.1.4.1.353.5 |
atmfLanEmulation OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3 |
elanMIB OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2 |
elanAdminGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.1 |
elanAdminPolicyVal OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.1.1 |
byAtmAddr OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.1.1.1 |
byMacAddr OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.1.1.2 |
byRouteDescriptor OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.1.1.3 |
byLanType OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.1.1.4 |
byPktSize OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.1.1.5 |
elanConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.2 |
elanConfNextIdThe next available ELAN index provided
by the agent. The value of this object
can be used as the index to the
elanConfTable during creation.ro ElanLocalIndex .1.3.6.1.4.1.353.5.3.2.2.1 |
elanConfTableThis table contains all Emulated LANs
(ELANs) this agent manages. An ELAN
is defined by the ELAN name, a set of
TLVs, and other parameters. After an
ELAN is created, members of the ELAN
such as the LAN Emulation Server (LES)
or Client (LEC) can be added to this
ELAN entry in their repective tables.
There are four memebers to an ELAN and
they are LECS, LES, BUS (Broadcast and
Unknown Server ) and LEC. The support
of LECS is optional. The addition and
deletion of LECS is done in the
elanLecsConfGroup defined in this MIB.
The addition and deletion of the LEC
are done in the LEC Assignment tables
defined in this ELAN Configuration group.
The addition and deletion of the LES
are also defined in this group. The
addition and deletion of the BUS are
done in the LES MIB due to the fact that
LEC learns the BUS address only from
the LES it corresponds to. SEQUENCE OF ElanConfEntry .1.3.6.1.4.1.353.5.3.2.2.2 |
elanConfEntryEach entry in this table represents an
Emulated LAN. Objects elanConfIndex
and elanConfRowStatus are required
during row creation and deletion. ElanConfEntry .1.3.6.1.4.1.353.5.3.2.2.2.1 |
elanConfIndexA value which uniquely identifies a
conceptual row in the elanConfTable.
If the conceptual row identified by this value
of elanConfIndex is recreated following an agent
restart, the same value of elanConfIndex must be
used to identify the recreated row. ElanLocalIndex .1.3.6.1.4.1.353.5.3.2.2.2.1.1 |
elanConfNameThe name of this Emulated LAN entry.
When this object length is zero then the
ELAN name is not specified. The clients
assigned to this ELAN will also have
a zero length string as the ELAN name.
Note that ELAN name may be used as cross
reference to the LES MIB and BUS MIB
though not required. Multiple ELANs
with no ELAN name specified will cause
conflicts in reference to LES and BUS MIBs.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.353.5.3.2.2.2.1.2 |
elanConfTlvIndexThe value of this object identifies
one or more rows in the lecsTlvTable which
applies to this ELAN. This object is
set to zero if 1) LECS is not supported.
or 2) there is no TLV associated with
this entry. If the LEC assignment policy
type is by TLVs, then the LECS matches
the TLVs in the CONFIGURE request with
TLVs assigned to each ELAN, and assign
the requestor to the matching ELAN.
If the LECS receives a CONFIGURE request
with no TLV, the LECS may try to match
it to the entry in this table with a
zero value elanConfTlvIndex. In the case
there is more than one entry in this table
with zero value elanConfTlvIndex, the
behavior of the LECS is not specified.rw TlvSelectorIndexType .1.3.6.1.4.1.353.5.3.2.2.2.1.3 |
elanConfLanTypeThe LAN type of this ELAN entry. This
object is required to be either 802.3 or
802.5. If the LEC assignment policy is
by LAN type. That is, if the LECS is
assigning the LEC to ELAN according to
its LAN type, this object is used to
indicate the LAN type of the ELAN.rw LecDataFrameFormat .1.3.6.1.4.1.353.5.3.2.2.2.1.4 |
elanConfMaxFrameSizeThe maximum data frame size of this
ELAN entry. The maximum AAL-5 SDU size
of a data frame that this ELAN can support.
This object is required
to be one of the enumerations except
other(1) when the LEC assignment
policy is by Data Frame Size. That is,
if LECS is assigning the LEC to ELAN
according to its maximum data frame
size, this object is used to specify
the frame size supported by this
ELAN.rw LecDataFrameSize .1.3.6.1.4.1.353.5.3.2.2.2.1.5 |
elanConfRowStatusThis object is used to create or
delete entries in the elanConfTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.3.2.2.2.1.6 |
elanLesTableThis table contains all LESs for each
ELAN specified in the elanConfTable.
Each ELAN can have more than
one LES providing LAN Emulation
services. Each LES can service only
one ELAN. The table is indexed by the
elanConfIndex which points to the ELAN
this LES is providing service to, and
elanLesIndex which unquely identifies
a LES. This table is used for configuration
of an ELAN only, that is, creating a
LES in this table does not instantiate
a LES in the network. It is done in
the LES MIB. SEQUENCE OF ElanLesEntry .1.3.6.1.4.1.353.5.3.2.2.3 |
elanLesEntryEach entry in this table represents
a LES/Emulated LAN pair. Object
elanLesAtmAddress besides elanLesRowStatus
is also required during row creation. ElanLesEntry .1.3.6.1.4.1.353.5.3.2.2.3.1 |
elanLesIndexAn arbitrary number which uniquely
identifies the LES this entry pertains
to. INTEGER .1.3.6.1.4.1.353.5.3.2.2.3.1.1 |
elanLesAtmAddressThe ATM address of the LES entry.
If LECS is supported, the value of
this object is the LES ATM address
LECS returns to the LEC in the
CONFIGURE response. If LECS
is not supported, the value of this
object pertains to the LES ATM address
network manager provides to the
LEC. The LEC assigned to this ELAN
uses this ATM address as the called
party address in the JOIN request.
The calling party address used by
LES in the JOIN response is not
specified by this MIB.rw AtmLaneAddress .1.3.6.1.4.1.353.5.3.2.2.3.1.2 |
elanLesRowStatusThis object is used to create or
delete entries in the elanLesfTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.3.2.2.3.1.3 |
elanPolicyTableThis table contains all policies this
agent supports for assigning a LEC to
an ELAN.
A set of policies with the same or
different priorities can be selected
by the entity which provides ELAN
configuration service such
as the LECS. The policy with the
highest priority or with the smallest
elanPolicyPriority , is evaluated
first. The policies with the same
elanPolicyPriority are evaluated
at the same time with the AND operation.
When LECS receives a configure
request, it checks it's policies selected
from this table to determine which
ELAN and LES the LEC will join.
This table is indexed by a selector
index and a policy index. The policy
index unquely identifies a policy and
the selector index allows multiple
policies be selected by one LECS or
an entity that is providing ELAN
configuration service. SEQUENCE OF ElanPolicyEntry .1.3.6.1.4.1.353.5.3.2.2.4 |
elanPolicyEntryEach entry in this table represents a
policy supported by the entity which
provides ELAN configuration
services. Each policy can be used to
evaluate the CONFIGURE request from
the LEC in determining which ELAN it
belongs to. ElanPolicyEntry .1.3.6.1.4.1.353.5.3.2.2.4.1 |
elanPolicySelectorIndexThe value of this object indicates
a group of policies that can be selected
by the ELAN configuration service
provider such as the LECS. PolicySelectorIndexType .1.3.6.1.4.1.353.5.3.2.2.4.1.1 |
elanPolicyIndexThe value of this object uniquely
identifies a single policy entry in
this table. INTEGER .1.3.6.1.4.1.353.5.3.2.2.4.1.2 |
elanPolicyPriorityThe priority of this policy entry.
Policies are evaluated by the
entity which provides ELAN configuration
service (LECS) by their
priorities. Policies with the
same priority values should be
evludated at the same time with
an AND operation. That is, if
one of the policy with the same
priority is not met,
the evluation should fail.
The value 1 has the highest priority.rw INTEGER .1.3.6.1.4.1.353.5.3.2.2.4.1.3 |
elanPolicyTypeThe type of this policy.
The value of this object is
an object identifier points
to a leaf in the elanAdminGroup
The value of this object has
to exist in the tree before
being modified or created.
A vender can use a vender
specific policy added to the
elanAdminPolicyVal or a
separate vender tree. The
agent is not required to
support every types specified
in the elanAdminGroup under
elanAdminPolicyVal.rw AutonomousType .1.3.6.1.4.1.353.5.3.2.2.4.1.4 |
elanPolicyRowStatusThis object is used to create or
delete entries in the elanPolicyTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.3.2.2.4.1.5 |
elanLecAtmAddrTableThis table is used to assign a LEC
to an ELAN by ATM address.
When the by ATM address policy is
used, this table is used to specify
the LEC's ATM address or portion of an ATM
address. The ATM address is used by
the LECS or other entity which serves
the LANE configuration function to
determine the ELAN membership.
This table is indexed
by the elanConfIndex which points
to the ELAN this LEC belongs, the
elanLesIndex which points to the
LES this LEC should join, the
LEC's ATM address and an ATM address
mask. Portions of ATM address
can be used in dertermining ELAN
membership by using both the ATM
address and the mask. SEQUENCE OF ElanLecAtmAddrEntry .1.3.6.1.4.1.353.5.3.2.2.5 |
elanLecAtmAddrEntryEach entry represents a LEC to ELAN
binding. ElanLecAtmAddrEntry .1.3.6.1.4.1.353.5.3.2.2.5.1 |
elanLecAtmAddressThe value of this object is the
ATM address of a LAN Emulation
client. This object and the
object elanLecAtmMask are used
to form an ATM address or portion
of an ATM address to be used
by the LECS in determining the
ELAN membership when the policy
of this LECS is by ATM address. AtmLaneAddress .1.3.6.1.4.1.353.5.3.2.2.5.1.1 |
elanLecAtmMaskThe ATM address mask associated with
the object elanLecAtmAddress. The value
of the mask is an ATM address with
the don't care portion set to zero
and the valid ATM address portion set to one.rw AtmLaneAddress .1.3.6.1.4.1.353.5.3.2.2.5.1.2 |
elanLecAtmRowStatusThis object is used to create or
destroy entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.3.2.2.5.1.4 |
elanLecMacAddrTableThis table is used to assign a LEC
to an ELAN by MAC address.
When the byMacAddress policy is
used, this table is used to specify
the LEC's ELAN membership by ATM
address. This table is indexed
by the elanConfIndex which points
to the ELAN this LEC belongs, the
elanLesIndex which points to the
LES this LEC should join, and the
LEC's MAC address. SEQUENCE OF ElanLecMacAddrEntry .1.3.6.1.4.1.353.5.3.2.2.6 |
elanLecMacAddrEntryEach entry represents a LEC to ELAN
binding. ElanLecMacAddrEntry .1.3.6.1.4.1.353.5.3.2.2.6.1 |
elanLecMacAddressThe value of this object is the
MAC address of a LAN Emulation
client. When a CONFIGURE request
is received with this MAC address,
it will be assigned to the ELAN
which elanConfIndex is pointing
to. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.353.5.3.2.2.6.1.1 |
elanLecMacRowStatusThis object is used to create or
destroy entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.3.2.2.6.1.2 |
elanLecRdTableThis table is used to assign a LEC
to an ELAN by Route Descriptor.
When the by Route Descriptor policy is
used, this table is used to specify
the LEC's ELAN membership by Route
Descriptor. This table is indexed
by the elanConfIndex which points
to the ELAN this LEC belongs, the
elanLesIndex which points to the
LES this LEC should join, and the
LEC's Route Descriptors. SEQUENCE OF ElanLecRdEntry .1.3.6.1.4.1.353.5.3.2.2.7 |
elanLecRdEntryEach entry represents a LEC to ELAN
binding. ElanLecRdEntry .1.3.6.1.4.1.353.5.3.2.2.7.1 |
elanLecRdSegIdThe LAN ID portion of the IEEE 802.5
route descriptor associated with this
conceptual row. INTEGER .1.3.6.1.4.1.353.5.3.2.2.7.1.1 |
elanLecRdBridgeNumThe Bridge Number portion of the
IEEE 802.5 route descriptor associated
with this conceptual row. INTEGER .1.3.6.1.4.1.353.5.3.2.2.7.1.2 |
elanLecRdRowStatusThis object is used to create or
destroy entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.3.2.2.7.1.4 |
elanLecsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.3 |
elanLecsConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.3.1 |
lecsConfNextIdThe next available LECS index. The
value of this object can be used as
the index to the lecsTable during
creation.ro ElanLocalIndex .1.3.6.1.4.1.353.5.3.2.3.1.1 |
lecsConfTableThis table contains the configuration
information of all LECS this agent
manages. This table can also be
used to create, delete or configure
a LECS. SEQUENCE OF LecsConfEntry .1.3.6.1.4.1.353.5.3.2.3.1.2 |
lecsConfEntryEach entry represents a LECS this
agent maintains.
Objects lecsAtmIfIndex, lecsAtmAddrSpec,
and lecsAtmAddrMask cannot be modified
unless the lecsAdminStatus is set to
down(2). And the change doesn't take
effect until the lecsAdminStatus is set
to up(1). LecsConfEntry .1.3.6.1.4.1.353.5.3.2.3.1.2.1 |
lecsConfIndexAn arbitrary integer which represents
a LECS this agent manages.
If the conceptual row identified by this value
of lecsConfIndex is recreated following an agent
restart, the same value of elanConfIndex must be
used to identify the recreated row. INTEGER .1.3.6.1.4.1.353.5.3.2.3.1.2.1.1 |
lecsAtmIfIndexAn ATM interface which the LECS receives
CONFIGURE requests
from. This value must match an existing
value in the ifTable. This object
is set to zero when the ATM interface
is not specified or there is more than
one ATM interface used by the LECS.rw IfIndexOrZero .1.3.6.1.4.1.353.5.3.2.3.1.2.1.2 |
lecsAtmAddrSpecAn ATM address specified by the
network or local management that,
with the ATM address mask, determines
a portion of the ATM address that
the LECS on the designated ATM interface
will use to derive the actual ATM
address from the network or ILMI. The derived
ATM address is specified in the object
lecsAtmAddrActual, which is used to
receive CONFIGURE requests.
The value of this object, if not
specified, is defaulted to the
well-known LECS ATM address specified
in the LAN Emulation Spec. 1.0.rw AtmLaneAddress .1.3.6.1.4.1.353.5.3.2.3.1.2.1.3 |
lecsAtmAddrMaskThe ATM address mask associated with
the object lecsAtmAddrSpec. The value
of the mask is an ATM address with
the don't care portion set to zero
and the valid ATM address portion set to one.rw AtmLaneMask .1.3.6.1.4.1.353.5.3.2.3.1.2.1.4 |
lecsAtmAddrActualThe resulting ATM address that the
LECS is accepting CONFIGURE
requests on the interface indicated
by the object lecsAtmIfIndex.
This address is the result of the
specified ATM address, its mask and
interaction through the ILMI with the
switch. Note that this object is only
valid when the corresponding lecsOperStatus
is 'up'.ro AtmLaneAddress .1.3.6.1.4.1.353.5.3.2.3.1.2.1.5 |
lecsPolicySelIndexThe set of policies used
by this LECS in dertermining
requesters ELAN membership.
The policies are defined in
the elanPolicyTable. The value
of this object must exist in the
elanPolicyTable.ro PolicySelectorIndexType .1.3.6.1.4.1.353.5.3.2.3.1.2.1.6 |
lecsLastInitializedThe value of the sysUpTime since
LECS has last entered the state
indicated by the object lecsOperStatus.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.353.5.3.2.3.1.2.1.7 |
lecsOperStatusThis object reflects the actual
state of the LECS which may differ
from that of the lecsAdminStatus
object. This can occur when
the interface ifOperStatus is
'down' but the corresponding
lecsAdminStatus is 'up'.ro Enumeration .1.3.6.1.4.1.353.5.3.2.3.1.2.1.8 |
lecsAdminStatusThe desired state of the LECS on
this interface as prescribed by the
operator. The actions of the agent
will, if at all possible, eventually
result in the desired state being
reflected in the lecsOperStatus.rw Enumeration .1.3.6.1.4.1.353.5.3.2.3.1.2.1.9 |
lecsRowStatusThis object is used to create or
delete entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.3.2.3.1.2.1.10 |
lecsElanTableThis table contains the mapping between
ELANs and LECS. One LECS can manage more than
one ELAN and one ELAN can only be managed by
a LECS.
When a LECS is deleted from the lecsConfTable,
all entries associated with this entry will
also be deleted. SEQUENCE OF LecsElanEntry .1.3.6.1.4.1.353.5.3.2.3.1.3 |
lecsElanEntryEach entry represents an ELAN to LECS
mapping. LecsElanEntry .1.3.6.1.4.1.353.5.3.2.3.1.3.1 |
elanLecsRowStatusThis object is used to create or
delete an entry from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.3.2.3.1.3.1.1 |
lecsTlvTableThis table contains all TLVs this
agent supports. This includes
not only the standard TLVs specified
in the LAN Emulation Spec. 1.0 [1] but
also the additional parameters
exchanged between the LECS and LEC.
This table is indexed by a selector
index, which allows more than one
TLV to be selected by an ELAN; and
the TLV tag, which specified the type
of the TLV; and a TLV index which
is used to distinguish between different
entries with the same TLV tag.
How does the LECS treat the TLVs
that are not specified in this table
in the CONFIGURE requests are not
defined in this MIB. SEQUENCE OF LecsTlvEntry .1.3.6.1.4.1.353.5.3.2.3.1.4 |
lecsTlvEntryEach entry represents a set of TLV
encodings for an ELAN represented
by the elanConfIndex. Objects lecsTlvVal
and lecsTlvRowStatus are required during
row creation. LecsTlvEntry .1.3.6.1.4.1.353.5.3.2.3.1.4.1 |
lecsTlvSelectorIndexThe value of this object indicates
a group of TLVs that can be selected. TlvSelectorIndexType .1.3.6.1.4.1.353.5.3.2.3.1.4.1.1 |
lecsTlvTagThe value of this object represents the
type of the contents of the lecsTlvVal
field in the entry. The OUI field
in this object occupies the first
( or most significant )3 octets.
The OUI value 00-A0-3E is used for
the standard values defined by the ATM
Forum specification. OCTET STRING .1.3.6.1.4.1.353.5.3.2.3.1.4.1.2 |
lecsTlvIndexThe index of this TLV encoding entry.
The value of this object can be used
to distinguish between different entries
with the same lecsTlvTag value. INTEGER .1.3.6.1.4.1.353.5.3.2.3.1.4.1.3 |
lecsTlvValThe value of this TLV entry.rw OCTET STRING .1.3.6.1.4.1.353.5.3.2.3.1.4.1.4 |
lecsTlvRowStatusThis object is used to create or
destroy entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.353.5.3.2.3.1.4.1.5 |
elanLecsFaultGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.3.2 |
lecsErrCtlTableThis table contains error log control
information of all LECS instances.
This table is an extention to the
lecsConfTable. It is used to enable
or disable error logs for a particular
LECS entry. SEQUENCE OF LecsErrCtlEntry .1.3.6.1.4.1.353.5.3.2.3.2.1 |
lecsErrCtlEntryEach entry represents a LECS entry
in the lecsConfTable. LecsErrCtlEntry .1.3.6.1.4.1.353.5.3.2.3.2.1.1 |
lecsErrCtlAdminStatusThis object is used to enable/disable error
logging for the LECS.rw Enumeration .1.3.6.1.4.1.353.5.3.2.3.2.1.1.1 |
lecsErrCtlOperStatusThis object is used to indicate
the result of a set operation to the
object lecsErrCtlAdminStatus.
If the error log was successfully
started, it is in active(2) mode.
Otherwise, it is set to either
outOfRes(3) or failed(4) for
the respective reasons.ro Enumeration .1.3.6.1.4.1.353.5.3.2.3.2.1.1.2 |
lecsErrCtlClearLogThis object is used to clear the error log
entries associated with this LECS.rw Enumeration .1.3.6.1.4.1.353.5.3.2.3.2.1.1.3 |
lecsErrCtlMaxEntriesThe maximum entries of the error
log a LECS can support.ro INTEGER .1.3.6.1.4.1.353.5.3.2.3.2.1.1.4 |
lecsErrCtlLastEntryThe index to the last entry in the error
log table associated with this LECS.rw LecsErrLogIndexType .1.3.6.1.4.1.353.5.3.2.3.2.1.1.5 |
lecsErrLogTableThis table contains error logs
of the LECS instances enabled
in the lecsErrCtlTable. This table
is indexed by the LECS instance
index and an arbitrary integer
uniquely identifies an error
log. SEQUENCE OF LecsErrLogEntry .1.3.6.1.4.1.353.5.3.2.3.2.2 |
lecsErrLogEntryEach entry represents a LEC that
was rejected due to a violation
against the policies or an error. LecsErrLogEntry .1.3.6.1.4.1.353.5.3.2.3.2.2.1 |
lecsErrLogIndexAn arbitrary integer which uniquely
identifies an error log entry. This
number ranges from 1 to the value of
the object lecsErrCtlMaxEntries times
number of LECS error log capability
enabled. The enabling/disabling of
the error log capability is done in
the lecsErrCtlTable.ro LecsErrLogIndexType .1.3.6.1.4.1.353.5.3.2.3.2.2.1.1 |
lecsErrLogAtmAddrThe ATM address of the requester
which sends the CONFIGURE request
and causes the error to occur.
The corresponding error code is
specified in the object lecsErrLogErrCode.ro AtmLaneAddress .1.3.6.1.4.1.353.5.3.2.3.2.2.1.2 |
lecsErrLogErrCodeThe Error code which indicates the
cause of the error triggered by the
CONFIGURE request sent by the
requester indicated by the value of
the object lecsErrLogAtmAddr.ro INTEGER .1.3.6.1.4.1.353.5.3.2.3.2.2.1.3 |
lecsErrLogTimeThe sysUpTime when this entry was logged by
the LECS.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.353.5.3.2.3.2.2.1.4 |
elanLecsStatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.3.3 |
lecsStatsTableA (conceptual) table of statistics
associated with all
LECS instances on the device. SEQUENCE OF LecsStatsEntry .1.3.6.1.4.1.353.5.3.2.3.3.1 |
lecsStatsEntryA (conceptual) row in the
lecsStatsTable which corresponds
to the statistics kept by a particular
instance of a LECS. LecsStatsEntry .1.3.6.1.4.1.353.5.3.2.3.3.1.1 |
lecsStatSuccessfulThe number of CONFIGURE requests
successfully granted since the agent
was last initialized.ro Counter .1.3.6.1.4.1.353.5.3.2.3.3.1.1.1 |
lecsStatInBadFramesThe number of mal formed CONFIGURE
requests dropped by the LECS.ro Counter .1.3.6.1.4.1.353.5.3.2.3.3.1.1.2 |
lecsStatInvalidParamThe number of CONFIGURE requests
rejected due to the invalid request
parameters error.ro Counter .1.3.6.1.4.1.353.5.3.2.3.3.1.1.3 |
lecsStatInsufResThe number of CONFIGURE requests rejected due
to the insufficent resources to grant request
error.ro Counter .1.3.6.1.4.1.353.5.3.2.3.3.1.1.4 |
lecsStatAccDeniedThe number of CONFIGURE requests rejected due
to the access denied error.ro Counter .1.3.6.1.4.1.353.5.3.2.3.3.1.1.5 |
lecsStatInvalidReqThe number of CONFIGURE requests rejected due
to the invalid requester-id error.ro Counter .1.3.6.1.4.1.353.5.3.2.3.3.1.1.6 |
lecsStatInvalidDestThe number of CONFIGURE requests rejected due
to the invalid destination error.ro Counter .1.3.6.1.4.1.353.5.3.2.3.3.1.1.7 |
lecsStatInvalidAddrThe number of CONFIGURE requests rejected due
to the invalid ATM address error.ro Counter .1.3.6.1.4.1.353.5.3.2.3.3.1.1.8 |
lecsStatNoConfThe number of CONFIGURE requests rejected due
to the LE Client is not recognized error.ro Counter .1.3.6.1.4.1.353.5.3.2.3.3.1.1.9 |
lecsStatConfErrorThe number of CONFIGURE requests rejected due
to the LE_CONFIGURE error.ro Counter .1.3.6.1.4.1.353.5.3.2.3.3.1.1.10 |
lecsStatInsufInfoThe number of CONFIGURE requests rejected due
to the insufficient information error.ro Counter .1.3.6.1.4.1.353.5.3.2.3.3.1.1.11 |
elanMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.4 |
elanMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.4.1 |
elanCConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.4.1.1 |
elanLecAssignByAtmGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.4.1.2 |
elanLecAssignByMacGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.4.1.3 |
elanLecAssignByRdGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.4.1.4 |
lecsCStatGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.4.1.5 |
lecsCGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.4.1.6 |
lecsCFaultGroup OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.4.1.7 |
elanMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.4.2 |
elanMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.353.5.3.2.4.2.1 |