EF-6000-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
136
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
136 total| Object Name |
|---|
mcData OBJECT IDENTIFIER .1.3.6.1.4.1.289 |
RFC1155-SMI Unknown .1.3.6.1.4.1.289 |
ef6000PortScnAn ef6000PortScn(1) is generated
whenever a Fc_Port changes its operational state.
For instance, the Fc_Port goes from on-line to offline. TRAP-TYPE .1.3.6.1.4.1.289.0.1 |
ef6000FruScnAn ef6000FruScn(2) is generated
whenever a FRU status changes its operational state. TRAP-TYPE .1.3.6.1.4.1.289.0.2 |
ef6000PortBindingViolationAn ef6000PortBindingViolation(3) is generated
whenever the switch detects that a port binding violation occurs. TRAP-TYPE .1.3.6.1.4.1.289.0.3 |
ef6000ThresholdAlertAn ef6000ThresholdAlert(4) is generated
whenever a threshold alert occurs. TRAP-TYPE .1.3.6.1.4.1.289.0.4 |
commDev OBJECT IDENTIFIER .1.3.6.1.4.1.289.2 |
fibreChannel OBJECT IDENTIFIER .1.3.6.1.4.1.289.2.1 |
fcSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.289.2.1.1 |
ef-6000 OBJECT IDENTIFIER .1.3.6.1.4.1.289.2.1.1.2 |
ef6000Sys OBJECT IDENTIFIER .1.3.6.1.4.1.289.2.1.1.2.1 |
ef6000SysCurrentDateThe current date information.ro DisplayString .1.3.6.1.4.1.289.2.1.1.2.1.1 |
ef6000SysBootDateThe date and time of the last IPL of the switch.ro DisplayString .1.3.6.1.4.1.289.2.1.1.2.1.2 |
ef6000SysFirmwareVersionThe current version of the firmware.ro DisplayString .1.3.6.1.4.1.289.2.1.1.2.1.3 |
ef6000SysTypeNumThe ASCII type number of the switch.ro DisplayString .1.3.6.1.4.1.289.2.1.1.2.1.4 |
ef6000SysModelNumThe ASCII model number of the switch.ro DisplayString .1.3.6.1.4.1.289.2.1.1.2.1.5 |
ef6000SysMfgThe ASCII manufacturer of the switch.ro DisplayString .1.3.6.1.4.1.289.2.1.1.2.1.6 |
ef6000SysPlantOfMfgThe ASCII plant of manufacturer of the switch.ro DisplayString .1.3.6.1.4.1.289.2.1.1.2.1.7 |
ef6000SysEcLevelThe ASCII EC level ID of the switch.ro DisplayString .1.3.6.1.4.1.289.2.1.1.2.1.8 |
ef6000SysSerialNumThe ASCII system serial number of the switch.ro DisplayString .1.3.6.1.4.1.289.2.1.1.2.1.9 |
ef6000SysOperStatusThe current operational status of the switch.ro Ef6000SysOperStatus .1.3.6.1.4.1.289.2.1.1.2.1.10 |
ef6000SysStateIf the operational status of the switch is
operational, the switch will be in one of the four states:
online(1), coming-online(2), offline(3), and going-offline(4).ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.1.11 |
ef6000SysAdmStatusThe desired administrative status
of the switch. A management station may place the switch
in a desired state by setting this object accordingly.
The desired administrative status are online(1) and offline(2).
The online means setting the switch to be accessible by
an external Fibre Channel port, and offline means setting
the switch to be inaccessible.rw Enumeration .1.3.6.1.4.1.289.2.1.1.2.1.12 |
ef6000SysConfigSpeedSwitch speed capability. It's a user initiated option
to adjust the system-wide port speed capability.ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.1.13 |
ef6000Fru OBJECT IDENTIFIER .1.3.6.1.4.1.289.2.1.1.2.2 |
ef6000FruTableA table that contains one entry for each module. SEQUENCE OF Ef6000FruEntry .1.3.6.1.4.1.289.2.1.1.2.2.1 |
ef6000FruEntryAn entry containing the service parameters of the module. Ef6000FruEntry .1.3.6.1.4.1.289.2.1.1.2.2.1.1 |
ef6000FruCodeField Replaceable Unit.
A hardware component of the product that is replaceable
as an entire unit. Each module defined in this MIB has
a fixed FRU code.ro Ef6000FruCode .1.3.6.1.4.1.289.2.1.1.2.2.1.1.1 |
ef6000FruPositionThis object identifies the position
of the module. The value starts from 1 to the maximum number of
the cards that can be contained within this switch.ro Ef6000FruPosition .1.3.6.1.4.1.289.2.1.1.2.2.1.1.2 |
ef6000FruStatusThis object identifies the operational
status of the module. The active(1) state indicates that
the current module is active; The backup(2) state indicates
that the back up module is used; The update-busy (3) state
indicates that the module is in the updating process;
The failed(4) state indicates that the current module is failed.ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.2.1.1.3 |
ef6000FruPartNumberThe part number of the module.ro DisplayString .1.3.6.1.4.1.289.2.1.1.2.2.1.1.4 |
ef6000FruSerialNumberThe serial number of the module.ro DisplayString .1.3.6.1.4.1.289.2.1.1.2.2.1.1.5 |
ef6000FruPowerOnHoursThe number of the hours that the
FRU has been in operation.ro Counter .1.3.6.1.4.1.289.2.1.1.2.2.1.1.6 |
ef6000FruTestDateThe final test date of the module.ro DisplayString .1.3.6.1.4.1.289.2.1.1.2.2.1.1.7 |
ef6000Port OBJECT IDENTIFIER .1.3.6.1.4.1.289.2.1.1.2.3 |
ef6000PortTableA table that contains one entry
for each switch port. SEQUENCE OF Ef6000PortEntry .1.3.6.1.4.1.289.2.1.1.2.3.1 |
ef6000PortEntryAn entry containing the information of the switch port. Ef6000PortEntry .1.3.6.1.4.1.289.2.1.1.2.3.1.1 |
ef6000PortIndexThe fixed physical port number on the switch.
It ranges from 1 to the number of physical ports that can be
supported in the switch.ro Ef6000PortIndex .1.3.6.1.4.1.289.2.1.1.2.3.1.1.1 |
ef6000PortPhyStateThe physical state of the port.ro Ef6000PortPhyState .1.3.6.1.4.1.289.2.1.1.2.3.1.1.2 |
ef6000PortOpStatusThe operational status of the port.
The online(1) state indicates that user frames can be passed.ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.3.1.1.3 |
ef6000PortAdmStatusThe desired state of the port.
A management station may place the port in a desired
state by setting this object accordingly. The testing(3)
state indicates that no user frames can be passed.
As the result of either explicit management action
or per configuration information accessible by the switch,
ef6000PortAdmStatus is then changed to either the online(1)
or testing(3) states, or remains in the offline state.rw Enumeration .1.3.6.1.4.1.289.2.1.1.2.3.1.1.4 |
ef6000PortConnectorSupported connector types of the port.ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.3.1.1.5 |
ef6000PortDistanceA bit map to represent distance types of the Port.
bit 0 unknown
bit 1-3 reserved
bit 4 long distance (l)
bit 5 intermediate distance (i)
bit 6 short distance (s)
bit 7 very long distancero INTEGER .1.3.6.1.4.1.289.2.1.1.2.3.1.1.6 |
ef6000PortTypeSupported transceiver types of the port.ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.3.1.1.7 |
ef6000PortMediaA bit map to represent transmission media of the port.
bit 0 single mode (sm)
bit 1 reserved
bit 2 multi-mode, 50m (m5)
bit 3 multi-mode, 62.5 (m6)
bit 4-6 reserved
bit 7 copperro INTEGER .1.3.6.1.4.1.289.2.1.1.2.3.1.1.8 |
ef6000PortSpeedCapA bit map to represent the speed of optical transceiver.
bit 0 100 MBytes/Sec
bit 1 reserved
bit 2 200 MBytes/Sec
bit 3 reserved
bit 4 400 MBytes/Sec
bit 5-7 reservedro INTEGER .1.3.6.1.4.1.289.2.1.1.2.3.1.1.9 |
ef6000PortConfigSpeedThe configured port speed.ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.3.1.1.10 |
ef6000PortSpeedThe current operating speed of the port.ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.3.1.1.11 |
ef6000PortTxWords32A 32 bit counter for the number of words
within frames that the port has transmitted. (Primitive signals
and primitive sequence are not included.)ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.20 |
ef6000PortRxWords32A 32 bit counter for the number of words
within frames that the port has received. (Primitive signals
and primitive sequence are not included.)ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.21 |
ef6000PortTxFrames32A 32 bit counter for the number of (Fibre Channel) frames
that the port has transmitted.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.22 |
ef6000PortRxFrames32A 32 bit counter for the number of (Fibre Channel) frames
that the port has received.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.23 |
ef6000PortTxThroughputThe Bps (bytes per second) transmission rate of the port.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.24 |
ef6000PortRxThroughputThe Bps (bytes per second) reception rate of the port.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.25 |
ef6000PortTxC2Words32A 32 bit counter for the number of class 2 4-byte words
that the port has transmitted. (Primitive signals
and primitive sequence are not included.)ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.30 |
ef6000PortRxC2Words32A 32 bit counter for the number of class 2 4-byte words
that the port has received. (Primitive signals
and primitive sequence are not included.)ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.31 |
ef6000PortTxC2Frames32A 32 bit counter for the number of Class 2 frames
that the port has transmitted.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.32 |
ef6000PortRxC2Frames32A 32 bit counter for the number of Class 2 frames
that the port has received.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.33 |
ef6000PortTxC2Octets32A 32 bit counter for the number of Class 2 Octets
that the port has transmitted.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.34 |
ef6000PortRxC2Octets32A 32 bit counter for the number of Class 2 Octets
that the port has received.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.35 |
ef6000PortTxC3Words32A 32 bit counter for the number of class 3 4-byte words
that the port has transmitted. (Primitive signals
and primitive sequence are not included.)ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.40 |
ef6000PortRxC3Words32A 32 bit counter for the number of class 3 4-byte words
that the port has received. (Primitive signals
and primitive sequence are not included.)ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.41 |
ef6000PortTxC3Frames32A 32 bit counter for the number of Class 3 frames
that the port has transmitted.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.42 |
ef6000PortRxC3Frames32A 32 bit counter for the number of Class 3 frames
that the port has received.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.43 |
ef6000PortTxC3Octets32A 32 bit counter for the number of Class 3 Octets
that the port has transmitted.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.44 |
ef6000PortRxC3Octets32A 32 bit counter for the number of Class 3 Octets
that the port has received.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.45 |
ef6000PortC3Discards32A 32 bit counter for the number of Class 3 frames
that the port has discarded.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.46 |
ef6000PortDiscardFramesThe number of frames
that the port has discarded.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.50 |
ef6000PortTxLinkResetsThe number of link resets
initiated by this switch port.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.51 |
ef6000PortRxLinkResetsThe number of link resets
initiated by the attached N_port.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.52 |
ef6000PortTxOLSsThe number of offline sequences
initiated by this switch port.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.53 |
ef6000PortRxOLSsThe number of offline sequences
initiated by the attached N_port.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.54 |
ef6000PortSyncLossesThe number of loss of synchronization timeout.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.60 |
ef6000PortSigLossesThe number of times that a Loss of Signal is detected.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.61 |
ef6000PortProtocolErrorsThe number of protocol errors detected.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.62 |
ef6000PortInvalidTxWordsThe number of Invalid Transmission words
that the port has received.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.63 |
ef6000PortLinkFailuresThe number of transitions to an LFx state.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.64 |
ef6000PortCrcsThe number of CRC errors
detected from frames received.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.65 |
ef6000PortTruncsThe number of frames shorter than the Fibre Channel minimum.ro Counter .1.3.6.1.4.1.289.2.1.1.2.3.1.1.66 |
ef6000PortTxWords64A 64 bit counter for the number of words
within frames that the port has transmitted. (Primitive signals
and primitive sequence are not included.)ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.67 |
ef6000PortRxWords64A 64 bit counter for the number of words
within frames that the port has received. (Primitive signals
and primitive sequence are not included.)ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.68 |
ef6000PortTxFrames64A 64 bit counter for the number of (Fibre Channel) frames
that the port has transmitted.ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.69 |
ef6000PortRxFrames64A 64 bit counter for the number of (Fibre Channel) frames
that the port has received.ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.70 |
ef6000PortTxC2Words64A 64 bit counter for the number of class 2 4-byte words
that the port has transmitted. (Primitive signals
and primitive sequence are not included.)ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.71 |
ef6000PortRxC2Words64A 64 bit counter for the number of class 2 4-byte words
that the port has received. (Primitive signals
and primitive sequence are not included.)ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.72 |
ef6000PortTxC2Frames64A 64 bit counter for the number of Class 2 frames
that the port has transmitted.ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.73 |
ef6000PortRxC2Frames64A 64 bit counter for the number of Class 2 frames
that the port has received.ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.74 |
ef6000PortTxC2Octets64A 64 bit counter for the number of Class 2 Octets
that the port has transmitted.ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.75 |
ef6000PortRxC2Octets64A 64 bit counter for the number of Class 2 Octets
that the port has received.ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.76 |
ef6000PortTxC3Words64A 64 bit counter for the number of class 3 4-byte words
that the port has transmitted. (Primitive signals
and primitive sequence are not included.)ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.77 |
ef6000PortRxC3Words64A 64 bit counter for the number of class 3 4-byte words
that the port has received. (Primitive signals
and primitive sequence are not included.)ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.78 |
ef6000PortTxC3Frames64A 64 bit counter for the number of Class 3 frames
that the port has transmitted.ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.79 |
ef6000PortRxC3Frames64A 64 bit counter for the number of Class 3 frames
that the port has received.ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.80 |
ef6000PortTxC3Octets64A 64 bit counter for the number of Class 3 Octets
that the port has transmitted.ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.81 |
ef6000PortRxC3Octets64A 64 bit counter for the number of Class 3 Octets
that the port has received.ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.82 |
ef6000PortC3Discards64A 64 bit counter for the number of Class 3 frames
that the port has discarded.ro OCTET STRING .1.3.6.1.4.1.289.2.1.1.2.3.1.1.83 |
ef6000PortBinding OBJECT IDENTIFIER .1.3.6.1.4.1.289.2.1.1.2.4 |
ef6000PortBindingTableA table that contains one entry
for each switch port. SEQUENCE OF Ef6000PortBindingEntry .1.3.6.1.4.1.289.2.1.1.2.4.1 |
ef6000PortBindingEntryAn entry containing the port binding information
of the switch port. Ef6000PortBindingEntry .1.3.6.1.4.1.289.2.1.1.2.4.1.1 |
ef6000PortBindingIndexThe fixed physical port number on the switch.
It ranges from 1 to the number of physical ports that can be
supported in the switch.ro Ef6000PortIndex .1.3.6.1.4.1.289.2.1.1.2.4.1.1.1 |
ef6000PortBindingFlagThe flag indicates whether or not Port Binding
is in effect for an individual port.rw Enumeration .1.3.6.1.4.1.289.2.1.1.2.4.1.1.2 |
ef6000PortConfiguredWWNThe authorized port WWN for attached servers and
storage systems (F ports), or the authorized switch WWN for
attached switches (E ports).rw Ef6000PortWWN .1.3.6.1.4.1.289.2.1.1.2.4.1.1.3 |
ef6000PortAttachedWWNThe WWN of the device currently attached to the port
whether it has successfully connected or is currently being rejected
due to a Port Binding violation.ro Ef6000PortWWN .1.3.6.1.4.1.289.2.1.1.2.4.1.1.4 |
ef6000Zoning OBJECT IDENTIFIER .1.3.6.1.4.1.289.2.1.1.2.5 |
ef6000ActiveZoneSetNameThe active zone set name. This value will return NULL if the
active zone set state is disabledro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.289.2.1.1.2.5.1 |
ef6000ActiveZoneCountThe number of zones in the active zone set.
This value will return 0 if the active zone set state is disabledro INTEGER .1.3.6.1.4.1.289.2.1.1.2.5.2 |
ef6000DefaultZoneSetStateThe set state of the default zone set (1=Enabled,2= Disabled).ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.5.3 |
ef6000ActiveZoneSetStateThe state of the active zone set. If the active
zone set state is disabled, then ActiveZoneSetName and
ActiveZoneSetCount are invalid (1=Enabled,2= Disabled).ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.5.4 |
ef6000HardwareEnforcedZoningIndicates if zoning is hardware enforced
(1=Yes, 2=No).ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.5.5 |
ef6000ActiveZoneTableA table that contains one entry for each zone in the
active zone set. SEQUENCE OF Ef6000ActiveZoneEntry .1.3.6.1.4.1.289.2.1.1.2.5.6 |
ef6000ActiveZoneEntryAn entry containing the information specific to a zone. Ef6000ActiveZoneEntry .1.3.6.1.4.1.289.2.1.1.2.5.6.1 |
ef6000ZoneIndexZone index number. This number will range from 1
to the number of zones specified by the ActiveZoneCount.ro INTEGER .1.3.6.1.4.1.289.2.1.1.2.5.6.1.1 |
ef6000ZoneNameThis object is the name of this zone entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.289.2.1.1.2.5.6.1.2 |
ef6000ZoneMemberCountThis object contains a count of the number of
members in this zone entry.ro INTEGER .1.3.6.1.4.1.289.2.1.1.2.5.6.1.3 |
ef6000ActiveMemberTableA table that contains one entry for each member in the
active zone set. SEQUENCE OF Ef6000ActiveMemberEntry .1.3.6.1.4.1.289.2.1.1.2.5.7 |
ef6000ActiveMemberEntryAn entry containing the information specific to a member. Ef6000ActiveMemberEntry .1.3.6.1.4.1.289.2.1.1.2.5.7.1 |
ef6000MemberZoneIndexThe index of the zone that this member belongs to.
This is the same value as ef6000ZoneIndex.ro INTEGER .1.3.6.1.4.1.289.2.1.1.2.5.7.1.1 |
ef6000MemberIndexMember index number. This number will range from 1
to the number of members specified by the corresponding ZoneMemberCount.ro INTEGER .1.3.6.1.4.1.289.2.1.1.2.5.7.1.2 |
ef6000MemberTypeThis object is the type of addressing that is associated
with this member.ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.5.7.1.3 |
ef6000MemberWWNThe WWN name as an 8-octet string. This value is only valid
if the member type is 1, otherwise it will return all zeros.ro Ef6000PortWWN .1.3.6.1.4.1.289.2.1.1.2.5.7.1.4 |
ef6000MemberDomainIDThe domain ID. This value is only valid if the member type is 2,
otherwise it will return NULL.ro INTEGER .1.3.6.1.4.1.289.2.1.1.2.5.7.1.5 |
ef6000MemberPortNumberThe port number. This value is only valid if the member type is 2,
otherwise it will return NULL.ro INTEGER .1.3.6.1.4.1.289.2.1.1.2.5.7.1.6 |
ef6000TA OBJECT IDENTIFIER .1.3.6.1.4.1.289.2.1.1.2.6 |
ef6000TATableA table that contains one entry
for each configured threshold alert. SEQUENCE OF Ef6000TAEntry .1.3.6.1.4.1.289.2.1.1.2.6.1 |
ef6000TAEntryAn entry containing a threshold alert configuration. Ef6000TAEntry .1.3.6.1.4.1.289.2.1.1.2.6.1.1 |
ef6000TAIndexThis object is used to identify which threshold has been triggered.ro INTEGER .1.3.6.1.4.1.289.2.1.1.2.6.1.1.1 |
ef6000TANameThe threshold alert name.ro DisplayString .1.3.6.1.4.1.289.2.1.1.2.6.1.1.2 |
ef6000TAStateThe current state of the threshold.ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.6.1.1.3 |
ef6000TATypeThe type of the threshold.ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.6.1.1.4 |
ef6000TAPortTypeA threshold can be set on a list of physical port numbers or
on all the ports of the specified type (ePorts, fPorts).ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.6.1.1.5 |
ef6000TAPortListA bit map that identifies which ports this threhold alert
applies to (only valid if the Threshold Alert Port Type = list). The left
most bit represents the port 0.ro Ef6000PortList .1.3.6.1.4.1.289.2.1.1.2.6.1.1.6 |
ef6000TAIntervalThe number of minutes in a threshold alert interval.ro INTEGER .1.3.6.1.4.1.289.2.1.1.2.6.1.1.7 |
ef6000TATriggerValueIf the alert type is a Throughput Threshold Alert, then this
is the percent utilization (1-100) required to trigger an alert.
If the alert type is a Counter Threshold Alert, then this is the counter
delta required to trigger an alert.ro INTEGER .1.3.6.1.4.1.289.2.1.1.2.6.1.1.8 |
ef6000TTADirectionThis only applies when the alert type is a Throughput
Threshold Alert. It specifies the throughput direction of the threshold.ro Enumeration .1.3.6.1.4.1.289.2.1.1.2.6.1.1.9 |
ef6000TTATriggerDurationThis only applies when the alert type is a
Throughput Threshold Alert. It specifies the amount of time
during a threshold alert interval that the trigger must be exceeded
before an alert is generated.ro INTEGER .1.3.6.1.4.1.289.2.1.1.2.6.1.1.10 |
ef6000CTACounterThis only applies when the alert type is a
Counter Threshold Alert. It specifies statistical counter
or counter set to be monitored. (This object is not supported
in the current release.)ro INTEGER .1.3.6.1.4.1.289.2.1.1.2.6.1.1.11 |