ECS2100-28PP-MIB
The MIB module for ECS2100 series
Main OID:
ecs2100-28ppMIB.1.3.6.1.4.1.259.10.1.43
1576
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
1576 total| Object Name |
|---|
accton OBJECT IDENTIFIER .1.3.6.1.4.1.259 |
edgecoreNetworks OBJECT IDENTIFIER .1.3.6.1.4.1.259.10 |
edgecoreNetworksMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1 |
ecs2100-28ppMIBThe MIB module for ECS2100 series MODULE-IDENTITY .1.3.6.1.4.1.259.10.1.43 |
ecs2100-28ppMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1 |
switchMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.1 |
switchNumberThe total number of switches present on this system.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.1.2 |
switchInfoTableTable of descriptive and status information about
the switch units in this system. SEQUENCE OF SwitchInfoEntry .1.3.6.1.4.1.259.10.1.43.1.1.3 |
switchInfoEntryTable providing descriptions and status information for
switch units. SwitchInfoEntry .1.3.6.1.4.1.259.10.1.43.1.1.3.1 |
swUnitIndexThis object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber. Integer32 .1.3.6.1.4.1.259.10.1.43.1.1.3.1.1 |
swHardwareVerHardware version of the main board.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.1.3.1.2 |
swMicrocodeVerMicrocode version of the main board.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.1.3.1.3 |
swLoaderVerLoader version of the main board.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.1.3.1.4 |
swBootRomVerBoot ROM code version of the main board.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.1.3.1.5 |
swOpCodeVerOperation code version of the main board.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.1.3.1.6 |
swPortNumberThe number of ports on this switch.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.1.3.1.7 |
swPowerStatusIndicates the switch using internalPower(1),
redundantPower(2) or both(3)ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.1.3.1.8 |
swRoleInSystemIndicates the switch is master(1), backupMaster(2)
or slave(3) in this system.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.1.3.1.9 |
swSerialNumberSerial number of the switch.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.1.3.1.10 |
swServiceTagService tag serial-number of the switch.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.1.3.1.13 |
swModelNumberModel number of the switch.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.1.3.1.14 |
swEpldVerThe EPLD version of the switch.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.1.3.1.15 |
switchOperStateGlobal operation state of the switch.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.1.4 |
switchProductId OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.1.5 |
swProdNameThe product name of this switch.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.1.5.1 |
swProdManufacturerThe product manufacturer of this switch.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.1.5.2 |
swProdDescriptionThe product description of this switch.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.1.5.3 |
swProdVersionThe runtime code version of this switch.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.1.5.4 |
swProdUrlThe URL of this switch, which we can connect through
a web browser.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.1.5.5 |
swIdentifierA unique identifier of which switch in the chassis is currently
being looked at.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.1.5.6 |
swChassisServiceTagThe service tag of the chassis this switch resides in.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.1.5.7 |
switchIndivPowerTableTable about the status of individual powers. SEQUENCE OF SwitchIndivPowerEntry .1.3.6.1.4.1.259.10.1.43.1.1.6 |
switchIndivPowerEntryTable about the status of individual power. SwitchIndivPowerEntry .1.3.6.1.4.1.259.10.1.43.1.1.6.1 |
swIndivPowerUnitIndexThis is defined as swUnitIndex.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.1.6.1.1 |
swIndivPowerIndex1 means internal power, 2 means external power.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.1.6.1.2 |
swIndivPowerStatusnotPresent(1) means not present, green(2) means
up, red(3) means down.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.1.6.1.3 |
switchJumboFrameStatusenable(1) means the Jumbo Frame has enabled, disabled(2)
means the Jumbo Frame has disabled.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.1.7 |
amtrMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.1.8 |
amtrMacAddrAgingStatusIf this is enabled(1), the MAC address table will age out according to
its timer. If this is disabled(2), the MAC address table will not
age out.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.1.8.3 |
portMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.2 |
portTableTable of descriptive and status information describing
the configuration of each switch port. This table also
contains information about each trunk. SEQUENCE OF PortEntry .1.3.6.1.4.1.259.10.1.43.1.2.1 |
portEntryAn entry in the table, describing the configuration of
one switch port or trunk. PortEntry .1.3.6.1.4.1.259.10.1.43.1.2.1.1 |
portIndexThe port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.2.1.1.1 |
portNameThe name of the port or trunk. This is the same as ifAlias
in the IF-MIB (RFC2863 or later).rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.1.1.2 |
portTypeIndicates the port type of the configuration of the switch.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.2.1.1.3 |
portSpeedDpxCfgConfigures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100Mbps and full duplex mode
halfDuplex1000(6) - 1000Mbps and half duplex mode
fullDuplex1000(7) - 1000Mbps and full duplex mode
halfDuplex10g(8) - 10g and half duplex mode
fullDuplex10g(9) - 10g and full duplex mode
hundredBaseTX port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
hundredBaseFX port can be set as:
fullDuplex100(5)
thousandBaseSX port can be set as:
fullDuplex1000(7)
thousandBaseLX port can be set as:
fullDuplex1000(7)
thousandBaseT port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
thousandBaseGBIC port can be set as:
fullDuplex1000(7)
thousandBaseSfp port can be set as:
fullDuplex1000(7)
hundredBaseFxScSingleMode port can be set as:
fullDuplex100(5)
hundredBaseFxScMultiMode port can be set as:
fullDuplex100(5)
thousandBaseCX port can be set as:
fullDuplex1000(7)
tenG port can be set as:
halfDuplex10g(8)
fullDuplex10g(9)
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.2.1.1.4 |
portFlowCtrlCfg(1) Flow control mechanism is enabled with tx and rx pause
mechansim.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, the port
uses IEEE 802.3x flow control mechanism.
If the port type is hundredBaseFX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, Flow
control mechanism will not function.
(2) Flow control mechanism is disabled.
(5) Flow control mechanism is enabled with tx pause
mechanism only.
(6) Flow control mechansim is enabled with rx pause
mechansim only.
Fast ethernet ports can be set as:
enabled(1),
disabled(2).
Gigabit ethernet ports can be set as:
enabled(1),
disabled(2),
tx(5),
rx(6).
The actual flow control mechanism is used given by
portFlowCtrlStatus.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.2.1.1.5 |
portCapabilitiesPort or trunk capabilities.rw Bits .1.3.6.1.4.1.259.10.1.43.1.2.1.1.6 |
portAutonegotiationWhether auto-negotiation is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.2.1.1.7 |
portSpeedDpxStatusThe operating speed and duplex mode of the
switched port or trunk. If the entry represents a trunk,
the speed is that of its individual members unless
the member ports have been inconsistently configured
in which case the value is error(1).ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.2.1.1.8 |
portFlowCtrlStatus(2) BackPressure flow control mechanism is used.
(3) IEEE 802.3 flow control mechanism is used.
(4) Flow control mechanism is disabled.
If the entry represents a trunk and the member ports
have been inconsistently configured then this value
is error(1).ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.2.1.1.9 |
portTrunkIndexThe trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to a trunk in the trunkIndex, defined by the
corresponding trunkPorts.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.1.1.10 |
portComboForcedModeThis determines the running mode of a combo port.
For a non-combo port, this variable has a value of none(1),
and setting this variable to none(1) has no effect.
For a combo port, this has its own valid values not
equal to none(1), and setting this variable to none(1) is
not allowed. sfpForced(4) is set if user want to force
this port running in fiber mode.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.2.1.1.12 |
portMasterSlaveModeCfgConfigures the PHY mode when auto negotiation is disabled and
speed-duplex is 1000full for giga copper port.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.2.1.1.15 |
portMacAddrLearningStatusSet this variable to enabled(1) to start to learn MAC
addresses. Set this variable to disabled(2) to stop to
learn MAC addresses.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.2.1.1.17 |
portMacAddrLearningCountThe current number of learned MAC addresses.ro Counter32 .1.3.6.1.4.1.259.10.1.43.1.2.1.1.18 |
portUpTimeThe port up time (in hundredths of a second).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.259.10.1.43.1.2.1.1.19 |
portShutdownReasonThe reason of port shutdown. The value is 0 if no
shutdown action is applied to this port.ro Bits .1.3.6.1.4.1.259.10.1.43.1.2.1.1.20 |
cableDiagMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.2.3 |
cableDiagCtlActionTo execute cable diagnostics on a port, assign
cableDiagCtlAction to the value of ifIndex defined
by the ifIndex in the IF-MIB. When read, this object
always returns 0.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.3.1 |
cableDiagResultTableTable for cable diagnostics result. SEQUENCE OF CableDiagResultEntry .1.3.6.1.4.1.259.10.1.43.1.2.3.2 |
cableDiagResultEntryEntry for cable diagnostics result. CableDiagResultEntry .1.3.6.1.4.1.259.10.1.43.1.2.3.2.1 |
cableDiagResultIfIndexThis is defined as the ifIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.1 |
cableDiagResultStatusPairAThe result of cable diagnostics. If there is no fault
on the cable, the value is ok(2). Value notTestedYet(1)
means the pair is not tested yet. Value ok(2) means the
pair works well. Value open(3) means there is a lack of
continuity between pins at each end of the pair. Value
short(4) means conductors are short-circuited together on
the pair. Value openShort(5) means the pair has open
and short issues. Value crosstalk(6) means the pair is
incorrectly connected at one end. Value unknown(7) means
pair has an error matching none of the above. Value
impedanceMismatch(8) means different quality cables
connected together. Value failed(9) means test failed.
Value notSupported(10) means cable diagnostics is not
supported. Value noCable(11) means there is no connected
cable.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.2 |
cableDiagResultStatusPairBThe result of cable diagnostics. If there is no fault
on the cable, the value is ok(2). Value notTestedYet(1)
means the pair is not tested yet. Value ok(2) means the
pair works well. Value open(3) means there is a lack of
continuity between pins at each end of the pair. Value
short(4) means conductors are short-circuited together on
the pair. Value openShort(5) means the pair has open
and short issues. Value crosstalk(6) means the pair is
incorrectly connected at one end. Value unknown(7) means
pair has an error matching none of the above. Value
impedanceMismatch(8) means different quality cables
connected together. Value failed(9) means test failed.
Value notSupported(10) means cable diagnostics is not
supported. Value noCable(11) means there is no connected
cable.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.3 |
cableDiagResultStatusPairCThe result of cable diagnostics. If there is no fault
on the cable, the value is ok(2). Value notTestedYet(1)
means the pair is not tested yet. Value ok(2) means the
pair works well. Value open(3) means there is a lack of
continuity between pins at each end of the pair. Value
short(4) means conductors are short-circuited together on
the pair. Value openShort(5) means the pair has open
and short issues. Value crosstalk(6) means the pair is
incorrectly connected at one end. Value unknown(7) means
pair has an error matching none of the above. Value
impedanceMismatch(8) means different quality cables
connected together. Value failed(9) means test failed.
Value notSupported(10) means cable diagnostics is not
supported. Value noCable(11) means there is no connected
cable.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.4 |
cableDiagResultStatusPairDThe result of cable diagnostics. If there is no fault
on the cable, the value is ok(2). Value notTestedYet(1)
means the pair is not tested yet. Value ok(2) means the
pair works well. Value open(3) means there is a lack of
continuity between pins at each end of the pair. Value
short(4) means conductors are short-circuited together on
the pair. Value openShort(5) means the pair has open
and short issues. Value crosstalk(6) means the pair is
incorrectly connected at one end. Value unknown(7) means
pair has an error matching none of the above. Value
impedanceMismatch(8) means different quality cables
connected together. Value failed(9) means test failed.
Value notSupported(10) means cable diagnostics is not
supported. Value noCable(11) means there is no connected
cable.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.5 |
cableDiagResultDistancePairADisplays the fault distance of pair A of the cable
in meters.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.6 |
cableDiagResultDistancePairBDisplays the fault distance of pair B of the cable
in meters.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.7 |
cableDiagResultDistancePairCDisplays the fault distance of pair C of the cable
in meters.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.8 |
cableDiagResultDistancePairDDisplays the fault distance of pair D of the cable
in meters.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.9 |
cableDiagResultTimeDisplays the last time of cable diagnostics.
For example, 'Jan 1 02:03:04 2002'.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.11 |
portUtilTableDispalys port utilization during recent 300 seconds. SEQUENCE OF PortUtilEntry .1.3.6.1.4.1.259.10.1.43.1.2.6 |
portUtilEntryDispalys port utilization during recent 300 seconds. PortUtilEntry .1.3.6.1.4.1.259.10.1.43.1.2.6.1 |
portUtilIfIndexThe port and trunk interface of the portUtilTable.
The interface identified by a particular value of this
index is the same interface identified by the same value
of ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.2.6.1.1 |
portInOctetRateThe input octet rate (kbits/sec) of the port.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.6.1.2 |
portInPacketRateThe input packet rate (pkts/sec) of the port.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.6.1.3 |
portInUtilThe input utilization of the port, in one per
hundred.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.6.1.4 |
portOutOctetRateThe output octet rate (kbits/sec) of the port.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.6.1.5 |
portOutPacketRateThe output packet rate (pkts/sec) of the port.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.6.1.6 |
portOutUtilThe output utilization of the port, in one per
hundred.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.6.1.7 |
portHist OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.2.8 |
portHistControlTableA list of history control entries. SEQUENCE OF PortHistControlEntry .1.3.6.1.4.1.259.10.1.43.1.2.8.1 |
portHistControlEntryA list of parameters that set up a periodic sampling of
statistics. PortHistControlEntry .1.3.6.1.4.1.259.10.1.43.1.2.8.1.1 |
portHistControlIndexAn index that uniquely identifies an entry in the
portHistControl table.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.8.1.1.1 |
portHistControlNameA textual name of the entity. It is mandatory that
this only contain printable ASCII characters.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.8.1.1.2 |
portHistControlDataSourceThis object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
portHistControlEntry. This source can be any
interface on this device.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.2.8.1.1.3 |
portHistControlIntervalThe interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
portHistControlEntry. This interval can
be set to any number of seconds between 1 and
86400 (1 day).rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.8.1.1.4 |
portHistControlBucketsRequestedThe requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
portHistControlEntry.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.8.1.1.5 |
portHistControlBucketsGrantedThe number of discrete sampling intervals
over which data shall be saved in the part of
the media-specific table associated with this
portHistControlEntry.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.8.1.1.6 |
portHistControlStatusThe status of this portHistControl entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.2.8.1.1.7 |
portHistCurrentTableA list of Ethernet history entries. SEQUENCE OF PortHistCurrentEntry .1.3.6.1.4.1.259.10.1.43.1.2.8.2 |
portHistCurrentEntryAn historical sample of Ethernet statistics on a particular
Ethernet interface. This sample is associated with the
portHistControlEntry which set up the parameters for
a regular collection of these samples. PortHistCurrentEntry .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1 |
portHistCurrentIndexThe history of which this entry is a part. The
history identified by a particular value of this
index is the same history as identified
by the same value of portHistControlIndex.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.1 |
portHistCurrentSampleIndexAn index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same portHistControlEntry.
This index starts at 1 and increases by one
as each new sample is taken.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.2 |
portHistCurrentIntervalStartThe value of sysUpTime at the start of the interval
over which this sample was measured.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.3 |
portHistCurrentInOctetsThe total number of octets received on the interface,
including framing characters.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.4 |
portHistCurrentInUcastPktsThe number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.5 |
portHistCurrentInMulticastPktsThe number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast
address at this sub-layer. For a MAC layer protocol, this
includes both Group and Functional addresses.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.6 |
portHistCurrentInBroadcastPktsThe number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast
address at this sub-layer.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.7 |
portHistCurrentInDiscardsThe number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.8 |
portHistCurrentInErrorsFor packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from
being deliverable to a higher-layer protocol. For
character-oriented or fixed-length interfaces, the
number of inbound transmission units that contained
errors preventing them from being deliverable to a
higher-layer protocol.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.9 |
portHistCurrentInUnknownProtosFor packet-oriented interfaces, the number of packets
received via the interface which were discarded because of
an unknown or unsupported protocol. For character-oriented
or fixed-length interfaces that support protocol
multiplexing the number of transmission units received via
the interface which were discarded because of an unknown or
unsupported protocol. For any interface that does not
support protocol multiplexing, this counter will always be
0.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.10 |
portHistCurrentOutOctetsThe total number of octets transmitted out of the
interface, including framing characters.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.11 |
portHistCurrentOutUcastPktsThe total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.12 |
portHistCurrentOutMulticastPktsThe total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast address at this sub-layer, including those that
were discarded or not sent. For a MAC layer protocol, this
includes both Group and Functional addresses.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.13 |
portHistCurrentOutBroadcastPktsThe total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
broadcast address at this sub-layer, including those that
were discarded or not sent.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.14 |
portHistCurrentOutDiscardsThe number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer space.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.15 |
portHistCurrentOutErrorsFor packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.16 |
portHistCurrentInUtilizationThe best estimate of the mean physical layer
network utilization on this interface during this
sampling interval, in hundredths of a percent.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.17 |
portHistCurrentOutUtilizationThe best estimate of the mean physical layer
network utilization on this interface during this
sampling interval, in hundredths of a percent.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.18 |
portHistPreviousTableA list of Ethernet history entries. SEQUENCE OF PortHistPreviousEntry .1.3.6.1.4.1.259.10.1.43.1.2.8.3 |
portHistPreviousEntryAn historical sample of Ethernet statistics on a particular
Ethernet interface. This sample is associated with the
portHistControlEntry which set up the parameters for
a regular collection of these samples. PortHistPreviousEntry .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1 |
portHistPreviousIndexThe history of which this entry is a part. The
history identified by a particular value of this
index is the same history as identified
by the same value of portHistControlIndex.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.1 |
portHistPreviousSampleIndexAn index that uniquely identifies the particular
sample this entry represents among all samples
associated with the same portHistControlEntry.
This index starts at 1 and increases by one
as each new sample is taken.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.2 |
portHistPreviousIntervalStartThe value of sysUpTime at the start of the interval
over which this sample was measured.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.3 |
portHistPreviousInOctetsThe total number of octets received on the interface,
including framing characters.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.4 |
portHistPreviousInUcastPktsThe number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.5 |
portHistPreviousInMulticastPktsThe number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast
address at this sub-layer. For a MAC layer protocol, this
includes both Group and Functional addresses.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.6 |
portHistPreviousInBroadcastPktsThe number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast
address at this sub-layer.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.7 |
portHistPreviousInDiscardsThe number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.8 |
portHistPreviousInErrorsFor packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from
being deliverable to a higher-layer protocol. For
character-oriented or fixed-length interfaces, the
number of inbound transmission units that contained
errors preventing them from being deliverable to a
higher-layer protocol.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.9 |
portHistPreviousInUnknownProtosFor packet-oriented interfaces, the number of packets
received via the interface which were discarded because of
an unknown or unsupported protocol. For character-oriented
or fixed-length interfaces that support protocol
multiplexing the number of transmission units received via
the interface which were discarded because of an unknown or
unsupported protocol. For any interface that does not
support protocol multiplexing, this counter will always be
0.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.10 |
portHistPreviousOutOctetsThe total number of octets transmitted out of the
interface, including framing characters.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.11 |
portHistPreviousOutUcastPktsThe total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.12 |
portHistPreviousOutMulticastPktsThe total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast address at this sub-layer, including those that
were discarded or not sent. For a MAC layer protocol, this
includes both Group and Functional addresses.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.13 |
portHistPreviousOutBroadcastPktsThe total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
broadcast address at this sub-layer, including those that
were discarded or not sent.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.14 |
portHistPreviousOutDiscardsThe number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer space.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.15 |
portHistPreviousOutErrorsFor packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors.ro Counter64 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.16 |
portHistPreviousInUtilizationThe best estimate of the mean physical layer
network utilization on this interface during this
sampling interval, in hundredths of a percent.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.17 |
portHistPreviousOutUtilizationThe best estimate of the mean physical layer
network utilization on this interface during this
sampling interval, in hundredths of a percent.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.18 |
portMediaInfoTableThis table lists the information of the media device
(SFP/XFP/Copper) installed in the physical port.
Only the ifIndices of Ethernet ports those are associated
with the operational cards will be included in this table. SEQUENCE OF PortMediaInfoEntry .1.3.6.1.4.1.259.10.1.43.1.2.10 |
portMediaInfoEntryAn entry in the Interface Media Information table.
The ifIndices of ethernet interfaces will be used
to index this table. PortMediaInfoEntry .1.3.6.1.4.1.259.10.1.43.1.2.10.1 |
portMediaInfoIfIndexifindex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.2.10.1.1 |
portMediaInfoConnectorTypeThe connector type.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.10.1.2 |
portMediaInfoFiberTypeThe fiber type.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.10.1.3 |
portMediaInfoEthComplianceCodesThe ethernet compliance codes.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.10.1.4 |
portMediaInfoBaudRateThe baud rate.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.10.1.5 |
portMediaInfoVendorOUIThe OUI of the vendor.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.10.1.6 |
portMediaInfoVendorNameThe media vendor name, full name of the corporation.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.10.1.7 |
portMediaInfoPartNumberThe media vendor part number.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.10.1.8 |
portMediaInfoRevisionThe media vendor product version number.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.10.1.9 |
portMediaInfoSerialNumberThe vendor serial number of the media device.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.10.1.10 |
portMediaInfoDateCodeThe date code of the media device.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.10.1.11 |
portOpticalMonitoringInfoTableThis table lists the instrumented parameters of all
optical interfaces. SEQUENCE OF PortOpticalMonitoringInfoEntry .1.3.6.1.4.1.259.10.1.43.1.2.11 |
portOpticalMonitoringInfoEntryOnly the ifIndices of optical interfaces
whose parameters need to be monitored will
be used to index this table. PortOpticalMonitoringInfoEntry .1.3.6.1.4.1.259.10.1.43.1.2.11.1 |
portOpticalMonitoringInfoIfIndexifindex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.2.11.1.1 |
portOpticalMonitoringInfoTemperatureThis object holds the value of the transmitter laser
diode temperature for the interface. This object
indicates the health of the transmitter.
The format is xxx.yyyy C(elcius). If the device supports
ALARM WARNING TRAP, then followed by whether the measured
value is normal, high/low alarm or high/low warning.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.11.1.2 |
portOpticalMonitoringInfoVccThis object holds the value of the Vcc. It is measured
in V. If the device supports ALARM WARNING TRAP, then
followed by whether the measured value is normal,
high/low alarm or high/low warning.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.11.1.3 |
portOpticalMonitoringInfoTxBiasCurrentTx Bias Current. It is measured in mA. If the device
supports ALARM WARNING TRAP, then followed by whether
the measured value is normal, high/low alarm or
high/low warning.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.11.1.4 |
portOpticalMonitoringInfoTxPowerThis object holds the value of the transmitter optical
signal power for the interface, measured in dBm. If the
device supports ALARM WARNING TRAP, then followed by
whether the measured value is normal, high/low alarm
or high/low warning.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.11.1.5 |
portOpticalMonitoringInfoRxPowerThis object holds the value of the receiver optical
signal power for the interface, measured in dBm. If
the device support ALARM WARNING TRAP, then followed
by whether the measured value is normal, high/low alarm
or high/low warning.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.2.11.1.6 |
portTransceiverThresholdInfoTableThis table lists the threshold of transceivers. SEQUENCE OF PortTransceiverThresholdInfoEntry .1.3.6.1.4.1.259.10.1.43.1.2.12 |
portTransceiverThresholdInfoEntryIdentify the index of the transceiver PortTransceiverThresholdInfoEntry .1.3.6.1.4.1.259.10.1.43.1.2.12.1 |
portTransceiverThresholdInfoIfIndexifindex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.2.12.1.1 |
portTransceiverThresholdInfoTemperatureLowAlarmThis object holds the low alarm threshold of
the transmitter laser diode temperature for
the interface.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.2 |
portTransceiverThresholdInfoTemperatureLowWarnThis object holds the low warning threshold of
the transmitter laser diode temperature for
the interface.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.3 |
portTransceiverThresholdInfoTemperatureHighWarnThis object holds the high warning threshold of
the transmitter laser diode temperature for
the interface.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.4 |
portTransceiverThresholdInfoTemperatureHighAlarmThis object holds the high alarm threshold of
the transmitter laser diode temperature for
the interface.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.5 |
portTransceiverThresholdInfoVccLowAlarmThis object holds the low alarm threshold
of the Vcc.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.6 |
portTransceiverThresholdInfoVccLowWarnThis object holds the low warning threshold
of the Vcc.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.7 |
portTransceiverThresholdInfoVccHighWarnThis object holds the high warning threshold
of the Vcc.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.8 |
portTransceiverThresholdInfoVccHighAlarmThis object holds the high alarm threshold
of the Vcc.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.9 |
portTransceiverThresholdInfoTxBiasCurrentLowAlarmlow alarm threshold of Tx Bias Current.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.10 |
portTransceiverThresholdInfoTxBiasCurrentLowWarnlow warning threshold of Tx Bias Current.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.11 |
portTransceiverThresholdInfoTxBiasCurrentHighWarnhigh warning threshold of Tx Bias Current.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.12 |
portTransceiverThresholdInfoTxBiasCurrentHighAlarmhigh alarm threshold of Tx Bias Current.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.13 |
portTransceiverThresholdInfoTxPowerLowAlarmThis object holds the low alarm threshold
of the transmitter optical signal power
for theinterface.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.14 |
portTransceiverThresholdInfoTxPowerLowWarnThis object holds the low warning threshold
of the transmitter optical signal power
for the interface.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.15 |
portTransceiverThresholdInfoTxPowerHighWarnThis object holds the high warning threshold
of the transmitter optical signal power
for the interface.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.16 |
portTransceiverThresholdInfoTxPowerHighAlarmThis object holds the high alarm threshold
of the transmitter optical signal power for
the interface.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.17 |
portTransceiverThresholdInfoRxPowerLowAlarmThis object holds the low alarm threshold
of the receiver optical signal power for
the interface.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.18 |
portTransceiverThresholdInfoRxPowerLowWarnThis object holds the low warning threshold
of the receiver optical signal power for
the interface.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.19 |
portTransceiverThresholdInfoRxPowerHighWarnThis object holds the high warning threshold
of the receiver optical signal power for
the interface.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.20 |
portTransceiverThresholdInfoRxPowerHighAlarmThis object holds the high alarm threshold
of the receiver optical signal power for
the interface.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.2.12.1.21 |
portTransceiverThresholdAutoModeIndicate the transceiver threshold is retrieved from
EEPROM or configured by user.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.2.12.1.22 |
powerSavingTableTable for power saving configuration. SEQUENCE OF PowerSavingEntry .1.3.6.1.4.1.259.10.1.43.1.2.14 |
powerSavingEntryAn entry describing the configuration and status for
power saving. PowerSavingEntry .1.3.6.1.4.1.259.10.1.43.1.2.14.1 |
powerSavingIfIndexThe port interface of the powerSavingTable. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.2.14.1.1 |
powerSavingStatusPower saving enabled status.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.2.14.1.2 |
trunkMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.3 |
trunkMaxIdThe maximum number for a trunk identifier.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.3.1 |
trunkValidNumberThe number of valid trunks.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.3.2 |
trunkTableTable describing the configuration and status of each
trunk. SEQUENCE OF TrunkEntry .1.3.6.1.4.1.259.10.1.43.1.3.3 |
trunkEntryAn entry describing the configuration and status of a
particular trunk. TrunkEntry .1.3.6.1.4.1.259.10.1.43.1.3.3.1 |
trunkIndexIdentifies the trunk within the switch that is
described by the table entry. Integer32 .1.3.6.1.4.1.259.10.1.43.1.3.3.1.1 |
trunkPortsThe complete set of ports currently associated with
this trunk.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.3.3.1.2 |
trunkCreationA value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.3.3.1.3 |
trunkStatusWriting this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.
A trunk created by LACP cannot be manually destroyed
or (re)configured.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.3.3.1.4 |
trunkBalanceModeThis defines the load balancing mode of trunks
in the system. It may be based on source and/or
destination MAC address or IP address.
macSrc(1) means source MAC address.
macDst(2) means destination MAC address.
macSrcDst(3) means source and destination MAC address.
ipSrc(4) means source IP address.
ipDst(5) means destination IP address.
ipSrcDst(6) means source and destination IP address.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.3.4 |
lacpMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.4 |
lacpPortTableTable for LACP port configuration. SEQUENCE OF LacpPortEntry .1.3.6.1.4.1.259.10.1.43.1.4.1 |
lacpPortEntryEntry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure. LacpPortEntry .1.3.6.1.4.1.259.10.1.43.1.4.1.1 |
lacpPortIndexThe port interface of the lacpPortTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.4.1.1.1 |
lacpPortStatusWhether 802.3ad LACP is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.4.1.1.2 |
staMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.5 |
staSystemStatusGlobal spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.1 |
staPortTableThe table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType. SEQUENCE OF StaPortEntry .1.3.6.1.4.1.259.10.1.43.1.5.2 |
staPortEntryThe conceptual entry of staPortTable. StaPortEntry .1.3.6.1.4.1.259.10.1.43.1.5.2.1 |
staPortProtocolMigrationWhen operating in RSTP (version 2) mode, writing true(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns false(2) when read.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.5.2.1.3 |
staPortOperEdgePortThe operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false
when a BPDU is received.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.5.2.1.5 |
staPortAdminPointToPointThe administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.5.2.1.6 |
staPortOperPointToPointThe operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the staPortAdminPointToPoint object.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.5.2.1.7 |
staPortSystemStatusPer-port spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.2.1.9 |
staPortLongAdminPathCostThe admin value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in the 32-bit value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated.
Setting this to 0 means that the path cost is automatically
determined. In this case, read staPortLongOperPathCost to get
the oper value.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.2.1.10 |
staPortLongOperPathCostThe oper value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in the 32-bit value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.2.1.11 |
staPortBpduFloodingThis parameter is used to configure the capability of BPDUs
flooding.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.2.1.12 |
staPortBpduGuardA value of enabled(1) indicates that BPDU port guard feature
is enabled for each port. A value of disabled(2) indicates
that the feature is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.2.1.15 |
staPortAdminEdgePortWithAutoThe administrative value of the edge port parameter.
A value of enable(1) indicates that this port should be
assumed as an edge-port, a value of disable(2) indicates
that this port should be assumed as a non-edge-port and
a value of auot (3) indicates this port in RSPT or MSTP mode
should be assumed as an edge-port after migration or max age expire
without receiving any BPDU and sending BPDU with proposal flag on.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.5.2.1.16 |
staPortBpduFilterThe administrative value of the BPDU filter parameter.
A value of enabled(1) indicates that this port will avoid
transmitting BPDUs on edge-port and the value of disabled(2)
indicates that this port will not avoid transmitting BPDUs
on edge-port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.2.1.17 |
staPortRootGuardStatusSpecifies the desired status of the root guard. This variable
configures the root guard feature to enforce the root bridge
placement in the network.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.2.1.18 |
staPortBpduGuardAutoRecoveryA value of enabled(1) indicates that BPDU port guard auto
recovery mechanism is enabled for this port. A value of
disabled(2) indicates that the mechanism is disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.2.1.19 |
staPortBpduGuardAutoRecoveryIntervalThe interval in seconds used by BPDU guard auto recovery
mechanism.rw Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.5.2.1.20 |
staPortTcPropStopStop topology change progate on this ifindex.
Don't enable on potentially ring port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.5.2.1.21 |
staProtocolTypeThe version of Spanning Tree Protocol the bridge is currently
running. The value 'stp(1)' indicates the Spanning Tree
Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates that
the Rapid Spanning Tree Protocol is as specified in IEEE
802.1w, and the value 'mstp(3)' indicates that the Multiple Spanning
Tree Protocol is as specified in IEEE 802.1s. New values may
be defined in the future as new or updated versions of the
protocol become available.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.5.3 |
staTxHoldCountThe value used by the Port Transmit state machine to limit
the maximum transmission rate.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.4 |
staPathCostMethodIndicates the type of spanning tree path cost mode configured
on the switch. This mode applies to all instances of the
spanning tree protocol running on the switch.
When the value of this MIB object is changed, the path cost of
all ports will be reassigned to the default path cost values
based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is set to long(2), the
staPortLongPathCost MIB object must be used to retrieve/configure
the spanning tree port path cost as a 32-bit value.
The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected.
While retrieving the value of dot1dStpPortPathCost, the maximum
value of 65535 will be returned if the value of staPortLongPathCost
for the same instance exceeds 65535.
When the value of this MIB object is set to short(1), the
dot1dStpPortPathCost in BRIDGE-MIB must be used.rw StaPathCostMode .1.3.6.1.4.1.259.10.1.43.1.5.5 |
xstMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.5.6 |
mstNameThe name of the Multiple Spanning Tree region.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.5.6.1 |
mstRevisionThe Revision number of the Multiple Spanning Tree region.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.6.2 |
mstMaxHopsThe max hop number counts of the Multiple Spanning Tree region.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.6.3 |
xstInstanceCfgTableThis table is used to configure the property of a specific
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0. SEQUENCE OF XstInstanceCfgEntry .1.3.6.1.4.1.259.10.1.43.1.5.6.4 |
xstInstanceCfgEntryA conceptual row containing the property of the RST or MST instance. XstInstanceCfgEntry .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1 |
xstInstanceCfgIndexAn arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance. Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.1 |
xstInstanceCfgPriorityThe priority of a specific spanning tree instance.
The value assigned should be in the range 0-61440
in steps of 4096.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.2 |
xstInstanceCfgTimeSinceTopologyChangeThe time (in hundredths of a second) since the last topology
change detected by the bridge entity in RST or MST.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.3 |
xstInstanceCfgTopChangesThe total number of topology changes detected by
this bridge in RST or MST since the management entity
was last reset or initialized.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.4 |
xstInstanceCfgDesignatedRootThe bridge identifier of the root of the spanning
tree as determined by the Multiple Spanning Tree Protocol. (802.1s)
or Rapid Spanning Tree Protocol (802.1w) executed by this node.
This value is used as the root identifier parameter in
all configuration bridge PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.5 |
xstInstanceCfgRootCostThe cost of the path to the root as seen from
this bridge of the RST or MST.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.6 |
xstInstanceCfgRootPortThe number of the port which offers the
lowest cost path from this bridge to the root
bridge of the RST or MST.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.7 |
xstInstanceCfgMaxAgeThe maximum age of Multiple Spanning Tree Protocol (802.1s)
or Rapid Spanning Tree Protocol (802.1w) information learned
from the network on any port before it is discarded,
in units of hundredths of a second. This is the actual
value that this bridge is currently using.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.8 |
xstInstanceCfgHelloTimeThe amount of time between the transmission of
configuration bridge PDUs by this node on any port
when it is the root of the specific spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using in RST or MST.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.9 |
xstInstanceCfgHoldTimeThis time value determines the interval length
during which no more than two configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.10 |
xstInstanceCfgForwardDelayFor RST or MST protocol, this time value, measured in units of
hundredths of a second, controls how fast a port changes
its spanning state when moving towards the forwarding
state. The value determines how long the port
stays in each of the listening and learning
states, which precede the forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the forwarding database. This value is the
current value being used by the bridge.
xstInstanceCfgBridgeForwardDelay defines the value that
this bridge and all others would start using
if/when this bridge were to become the root.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.11 |
xstInstanceCfgBridgeMaxAgeFor RST or MST protocol, the time (in hundredths of second)
that all bridges use for MaxAge when this bridge is acting
as the root. Note that 802.1D-1990 specifies that the range
for this parameter is related to the value of
xstInstanceCfgBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.12 |
xstInstanceCfgBridgeHelloTimeFor RST or MST protocol,the time (in hundredths of a second) that
all bridges use for HelloTime when this bridge is acting
as the root. The granularity of this timer is specified
by 802.1D-1990 to be 1 second.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.13 |
xstInstanceCfgBridgeForwardDelayFor RST or MST protocol, the time (in hundredths of a second)
that all bridges use for ForwardDelay when this bridge
is acting as the root.
Note that 802.1D-1990 specifies that the range for this
parameter is related to the value of
xstInstanceCfgBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.ro Timeout (BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.14 |
xstInstanceCfgTxHoldCountFor RST or MST protocol, the value used by the port transmit
state machine to limit the maximum transmission rate.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.15 |
xstInstanceCfgPathCostMethodFor RST or MST protocol, this indicates the type of spanning tree path
cost mode used by the switch. The mode applies to all instances of the
Spanning Tree protocol running on the switch.
When the value of this MIB object is changed, the path cost
of all ports will be reassigned to the default path cost
values based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is set to long(2),
the xstInstancePortPathCost MIB object must be used in order
to retrieve/configure the spanning tree port path cost as a
32-bit value. The set operation on dot1dStpPortPathCost in
BRIDGE-MIB will be rejected. While retrieving the value of
dot1dStpPortPathCost, the maximum value of 65535 will be
returned if the value of xstInstancePortPathCost for the same
instance exceeds 65535.
When the value of this MIB object is set to short(1),
the dot1dStpPortPathCost in BRIDGE-MIB must be used.ro StaPathCostMode .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.16 |
xstInstancePortTableThe extension table for dot1dStpPortEntry to provide
additional Spanning Tree information and configuration. SEQUENCE OF XstInstancePortEntry .1.3.6.1.4.1.259.10.1.43.1.5.6.5 |
xstInstancePortEntryThe conceptual row for xstInstancePortTable. XstInstancePortEntry .1.3.6.1.4.1.259.10.1.43.1.5.6.5.1 |
xstInstancePortPriorityDefines the priority used for this port in the Spanning
Tree Algorithm. If the path cost for all ports on a
switch is the same, the port with the highest priority
(i.e., lowest value) will be configured as an active link
in the Spanning Tree. This makes a port with higher
priority less likely to be blocked if the Spanning Tree
Algorithm is detecting network loops. Where more than one
port is assigned the highest priority, the port with
lowest numeric identifier will be enabled.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.3 |
xstInstancePortStateThe port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1): Port receives configuration messages,
but does not forward packets.
learning(2): Port has transmitted configuration messages
for an interval set by the Forward Delay
parameter without receiving contradictory
information. Port address table is cleared,
and the port begins learning addresses.
forwarding(3): Port forwards packets, and continues learning
addresses.
For ports which are disabled (see xstInstancePortEnable),
this object will have a value of discarding(1).ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.4 |
xstInstancePortEnableThe enabled/disabled status of the port.ro EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.5 |
xstInstancePortDesignatedRootThe unique bridge identifier of the bridge
recorded as the root in the configuration BPDUs
transmitted by the designated bridge for the
segment to which the port is attached.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.7 |
xstInstancePortDesignatedCostThe path cost of the designated port of the
segment connected to this port. This value is
compared to the root path cost field in received
bridge PDUs.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.8 |
xstInstancePortDesignatedBridgeThe bridge identifier of the bridge which this
port considers to be the designated bridge for
this port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.9 |
xstInstancePortDesignatedPortThe port identifier of the port on the designated
bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.10 |
xstInstancePortForwardTransitionsThe number of times this port has transitioned
from the learning state to the forwarding state.ro Counter32 .1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.11 |
xstInstancePortPortRoleThe role of the port in the RST or MST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port is connecting a LAN through the bridge to the
root bridge (i.e., designated port)
(4) The port may provide connectivity if other
bridges, bridge ports, or LANs fail or are removed.
(5) The port provides backup if other
bridges, bridge ports, or LANs fail or are removed.
(6) For MST protocol only, indicates whether this instance
is in a master role.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.12 |
xstInstancePortAdminPathCostThe admin value of the MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster media, and higher values assigned
to ports with slower media. (Path cost takes precedence
over port priority).rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.13 |
xstInstancePortOperPathCostThe oper value of the RST pathcost or MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster media, and higher values assigned
to ports with slower media. (Path cost takes precedence
over port priority).ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.14 |
mstInstanceEditTableThe Multiple Spanning Tree region instance vlan configuration table.
Please read the actual instance vlan mapped in the mstInstanceOperTable. SEQUENCE OF MstInstanceEditEntry .1.3.6.1.4.1.259.10.1.43.1.5.6.6 |
mstInstanceEditEntryA conceptual row containing the status of the MSTP instance. MstInstanceEditEntry .1.3.6.1.4.1.259.10.1.43.1.5.6.6.1 |
mstInstanceEditIndexAn arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance. Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.6.6.1.1 |
mstInstanceEditVlansMapA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with vlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc., The most significant bit of each octet
corresponds to the lowest value vlanIndex in that octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list.rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.5.6.6.1.2 |
mstInstanceEditVlansMap2kA string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with vlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list.rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.5.6.6.1.3 |
mstInstanceEditVlansMap3kA string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with vlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list.rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.5.6.6.1.4 |
mstInstanceEditVlansMap4kA string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with vlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list.rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.5.6.6.1.5 |
mstInstanceEditRemainingHopsThe remaining hop count for this MST instance.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.6.6.1.6 |
mstInstanceOperTableThe Multiple Spanning Tree region instance vlan mapped table. SEQUENCE OF MstInstanceOperEntry .1.3.6.1.4.1.259.10.1.43.1.5.6.7 |
mstInstanceOperEntryA conceptual row containing the status of the MSTP instance. MstInstanceOperEntry .1.3.6.1.4.1.259.10.1.43.1.5.6.7.1 |
mstInstanceOperIndexAn arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance. Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.6.7.1.1 |
mstInstanceOperVlansMapA string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with vlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc., The most significant bit of each octet
corresponds to the lowest value vlanIndex in that octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.ro OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.5.6.7.1.2 |
mstInstanceOperVlansMap2kA string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with vlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.ro OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.5.6.7.1.3 |
mstInstanceOperVlansMap3kA string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with vlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.ro OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.5.6.7.1.4 |
mstInstanceOperVlansMap4kA string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with vlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.ro OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.5.6.7.1.5 |
staLoopbackDetectionPortTableA table provides the mechanism to configure the
spanning tree loopback detection of each port or trunk SEQUENCE OF StaLoopbackDetectionPortEntry .1.3.6.1.4.1.259.10.1.43.1.5.8 |
staLoopbackDetectionPortEntryA conceptual row of staLoopbackDetectionPortTable. StaLoopbackDetectionPortEntry .1.3.6.1.4.1.259.10.1.43.1.5.8.1 |
staLoopbackDetectionPortIfIndexThe port and the trunk interfaces of the portTable. The interface
identified by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.8.1.1 |
staLoopbackDetectionPortStatusStatus of the port on whether spanning tree loopback detection is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.8.1.2 |
staLoopbackDetectionPortTrapStatusThe parameter indicates whether the trap has
to be sent when the loopback BPDUs have been detected.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.8.1.3 |
staLoopbackDetectionPortReleaseModeSetting it to auto(1) indicates that this port can be released
from discarding state automatically after loopback has occurred.
Setting it to manual(2) indicates that this port can be released
from discarding state manually after loopback has occurred.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.5.8.1.4 |
staLoopbackDetectionPortReleaseSet this to release(2) to release the port from discarding state.
noRelease(1) will always be obtained when reading this variable.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.5.8.1.5 |
staLoopbackDetectionPortShutdownIntervalSet the interval used when loopback detection action is
shutdown.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.5.8.1.7 |
staSystemBPDUFloodingGlobal BPDU flooding behavior configuration.
When BPDU is received on spanning tree disabled port.
(1) BPDU is flooded to all other spanning tree disabled ports in vlan that received BPDU.
(2) BPDU is flooded to all other spanning tree disabled ports.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.5.9 |
staCiscoPrestandardCompatibilityThe feature makes spanning tree operation compatible with Cisco
pre-standard versions.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.5.11 |
restartMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.7 |
restartOpCodeFileName of op-code file for start-up.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.7.1 |
restartConfigFileName of configuration file for start-up.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.7.2 |
restartControlSetting this object to warmBoot(2) causes the device to
reinitialize itself such that neither the agent configuration
nor the protocol entity implementation is altered. Setting this
object to coldBoot(3) causes the device to reinitialize itself such
that the agent's configuration or the protocol entity implementation
may be altered. When the device is running normally, this
variable has a value of running(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.7.3 |
mirrorMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.8 |
mirrorTableTable for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports can be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports. SEQUENCE OF MirrorEntry .1.3.6.1.4.1.259.10.1.43.1.8.1 |
mirrorEntryThe conceptual row of mirrorTable. MirrorEntry .1.3.6.1.4.1.259.10.1.43.1.8.1.1 |
mirrorDestinationPortThe destination port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.8.1.1.1 |
mirrorSourcePortThe source port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.8.1.1.2 |
mirrorTypeIf this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit
packets will be mirrored. If this value is both(3),
both receive and transmit packets will be mirrored.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.8.1.1.3 |
mirrorStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.8.1.1.4 |
rspanTableA table that contains the settings of RSPAN. SEQUENCE OF RspanEntry .1.3.6.1.4.1.259.10.1.43.1.8.3 |
rspanEntryThe conceptual row of rspanTable. RspanEntry .1.3.6.1.4.1.259.10.1.43.1.8.3.1 |
rspanSessionIdThe session ID that may specify an entry in the table which
contains destination port(s) information. Integer32 .1.3.6.1.4.1.259.10.1.43.1.8.3.1.1 |
rspanSrcTxPortsSpecifies the source port list in tx mode.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.8.3.1.2 |
rspanSrcRxPortsSpecifies the source port list in rx mode.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.8.3.1.3 |
rspanDstPortThe port number of a destination port. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.8.3.1.4 |
rspanDstPortTagSpecifies the traffic which is sent out from source port
with RSPAN VLAN ID or not.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.8.3.1.5 |
rspanSwitchRoleSpecifies the role of current switch.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.8.3.1.6 |
rspanRemotePortsSpecifies the uplink port list.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.8.3.1.7 |
rspanRemoteVlanIdSpecifies the ID of a RSPAN VLAN.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.8.3.1.8 |
rspanOperStatusThe operational status of the entry. A status of up(1)
means the setting of a session is complete and it has
started performing its function. A status of down(2) means
no function is performed because of incompleted session
setting.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.8.3.1.9 |
rspanStatusSet this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.8.3.1.10 |
igmpSnoopMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.9 |
igmpSnoopStatusParameter to enable or disable IGMP snooping on the device.
When enabled, the device will examine IGMP packets and set
up filters for IGMP ports.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.1 |
igmpSnoopQuerierEnables (disables) whether the switch acts as an IGMP
querier.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.2 |
igmpSnoopRouterPortExpireTimeSets the time (in seconds) the switch waits after
the previous querier has stopped querying before
the router port (which received query packets from
previous querier) expires.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.9.6 |
igmpSnoopVersionIGMP version snoopedrw Integer32 .1.3.6.1.4.1.259.10.1.43.1.9.7 |
igmpSnoopRouterCurrentTableTable for current router ports. SEQUENCE OF IgmpSnoopRouterCurrentEntry .1.3.6.1.4.1.259.10.1.43.1.9.8 |
igmpSnoopRouterCurrentEntryEntry for current router ports. IgmpSnoopRouterCurrentEntry .1.3.6.1.4.1.259.10.1.43.1.9.8.1 |
igmpSnoopRouterCurrentVlanIndexThe interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopRouterStaticTable. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.8.1.1 |
igmpSnoopRouterCurrentPortsThe set of ports which are current router ports, including static
router ports. Please refer to igmpSnoopRouterStaticTable.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.8.1.2 |
igmpSnoopRouterCurrentStatusThe set of ports which are static router ports.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.8.1.3 |
igmpSnoopRouterStaticTableTable for static router ports. SEQUENCE OF IgmpSnoopRouterStaticEntry .1.3.6.1.4.1.259.10.1.43.1.9.9 |
igmpSnoopRouterStaticEntryEntry for static router ports. IgmpSnoopRouterStaticEntry .1.3.6.1.4.1.259.10.1.43.1.9.9.1 |
igmpSnoopRouterStaticVlanIndexThe interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopRouterStaticTable. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.9.1.1 |
igmpSnoopRouterStaticPortsThe set of ports which are static router ports.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.9.1.2 |
igmpSnoopRouterStaticStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.9.9.1.3 |
igmpSnoopMulticastStaticTableTable for static multicast addresses. SEQUENCE OF IgmpSnoopMulticastStaticEntry .1.3.6.1.4.1.259.10.1.43.1.9.11 |
igmpSnoopMulticastStaticEntryEntry for static multicast addresses. IgmpSnoopMulticastStaticEntry .1.3.6.1.4.1.259.10.1.43.1.9.11.1 |
igmpSnoopMulticastStaticVlanIndexThe interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopMulticastStaticTable. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.11.1.1 |
igmpSnoopMulticastStaticIpAddressIP address of multicast group. IpAddress .1.3.6.1.4.1.259.10.1.43.1.9.11.1.2 |
igmpSnoopMulticastStaticPortsThe set of ports which are members.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.11.1.3 |
igmpSnoopMulticastStaticStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.9.11.1.4 |
igmpSnoopCurrentVlanTableTable for enabling or disabling IGMP snooping per VLAN. SEQUENCE OF IgmpSnoopCurrentVlanEntry .1.3.6.1.4.1.259.10.1.43.1.9.14 |
igmpSnoopCurrentVlanEntryEntry for enabling or disabling IGMP snooping. IgmpSnoopCurrentVlanEntry .1.3.6.1.4.1.259.10.1.43.1.9.14.1 |
igmpSnoopCurrentVlanIndexSame is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.14.1.1 |
igmpSnoopCurrentVlanStatusParameter to enable or disable IGMP snooping on this VLAN.
When enabled, the device will examine IGMP packets and set
up filters for IGMP ports.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.14.1.2 |
igmpSnoopCurrentVlanImmediateLeaveThe parameter to enable or disable the Immediate-Leave feature on this VLAN.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.14.1.3 |
igmpSnoopCurrentVlanGeneralQuerySuppressionThe parameter to enable or disable the general query suppresion
on this VLAN.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.14.1.4 |
igmpSnoopCurrentVlanLastMemQueryCountRepresents the number of queries sent by the switch before
it assumes there are no local members.rw Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.14.1.5 |
igmpSnoopCurrentVlanLastMemQueryIntvlThe last member query interval is the max response time
inserted into group-specific queries sent in response to
leave group messages,and is also the the max response time
inserted into group-and-source-specific query messages.rw Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.14.1.6 |
igmpSnoopCurrentVlanProxyAddressRepresents the address of queries sent by the switch.rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.9.14.1.7 |
igmpSnoopCurrentVlanQueryIntvlRepresents the query interval of queries sent by the switch.rw Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.14.1.8 |
igmpSnoopCurrentVlanQueryRespIntvlRepresents the query response interval of queries
sent by the switch.rw Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.14.1.9 |
igmpSnoopCurrentVlanProxyReportingSet this variable to enabled(1) to enable the feature.
Set this variable to disabled(2) to disable the feature.
Set this variable to default(3), the status of the feature
is decided by the global configuration.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.9.14.1.10 |
igmpSnoopCurrentVlanVersionthe version of igmp packets is supported by this vlan.rw Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.14.1.11 |
igmpSnoopCurrentVlanVersionExclusiveEnable/disable control of the IGMP Snooping exclusive
supported version.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.14.1.12 |
igmpSnoopCurrentVlanImmediateLeaveByHostIpThe parameter to enable or disable the Immediate-Leave feature by host ip on this VLAN.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.14.1.14 |
igmpSnoopMulticastGroupTableTable for current multicast addresses. SEQUENCE OF IgmpSnoopMulticastGroupEntry .1.3.6.1.4.1.259.10.1.43.1.9.15 |
igmpSnoopMulticastGroupEntryEntry for Group multicast addresses. IgmpSnoopMulticastGroupEntry .1.3.6.1.4.1.259.10.1.43.1.9.15.1 |
igmpSnoopMulticastGroupVlanIndexThe interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopMulticastStaticTable. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.15.1.1 |
igmpSnoopMulticastGroupIpAddressIP address of multicast group. IpAddress .1.3.6.1.4.1.259.10.1.43.1.9.15.1.2 |
igmpSnoopMulticastGroupSourceIPAddressSource IP address of source. IpAddress .1.3.6.1.4.1.259.10.1.43.1.9.15.1.3 |
igmpSnoopMulticastGroupPortsThe set of ports which are members of a multicast group, including
static members. Please refer to igmpSnoopMulticastStaticTable.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.15.1.4 |
igmpSnoopMulticastGroupStatusThe set of ports which are static IGMP member ports.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.15.1.5 |
igmpSnoopMulticastGroupPortCountThe number of forwarding port in this groupro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.15.1.6 |
igmpSnoopFilterStatusParameter to enable or disable IGMP filtering on the device.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.17 |
igmpSnoopProfileTableThe table for configuring the IGMP snooping profile. SEQUENCE OF IgmpSnoopProfileEntry .1.3.6.1.4.1.259.10.1.43.1.9.18 |
igmpSnoopProfileEntryThe entry for configuring the IGMP snooping profile. IgmpSnoopProfileEntry .1.3.6.1.4.1.259.10.1.43.1.9.18.1 |
igmpSnoopProfileIdThe ID of the IGMP snooping profile. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.18.1.1 |
igmpSnoopProfileActionThe access mode of the IGMP snooping profile.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.9.18.1.2 |
igmpSnoopProfileStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.9.18.1.3 |
igmpSnoopProfileCtl OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.9.19 |
igmpSnoopProfileCtlIdThe ID of the IGMP snooping profile. The default value
is zero, meaning that no ID is specified. In order to
create a profile, a non-zero value must be specified.rw Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.19.1 |
igmpSnoopProfileCtlInetAddressTypeThe address type is associated with this agent.
Only ipv4(1) type is supported.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.19.2 |
igmpSnoopProfileCtlStartInetAddressThe specified addresses in the start of the controlled
IP multicast addresses.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.19.3 |
igmpSnoopProfileCtlEndInetAddressThe specified addresses in the end of the controlled
IP multicast addresses.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.19.4 |
igmpSnoopProfileCtlActionSetting it to create(2) creates the range of the
controlled IP multicast addresses.
Setting it to destroy(3) destroys the range of the
controlled IP multicast addresses.
When the action is completed, this object becomes
noAction(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.9.19.5 |
igmpSnoopProfileRangeTableThe table for configuring the range of the IGMP snooping
profile. SEQUENCE OF IgmpSnoopProfileRangeEntry .1.3.6.1.4.1.259.10.1.43.1.9.20 |
igmpSnoopProfileRangeEntryThe entry for configuring the range of the IGMP snooping
profile. IgmpSnoopProfileRangeEntry .1.3.6.1.4.1.259.10.1.43.1.9.20.1 |
igmpSnoopProfileRangeProfileIdThis is defined as igmpSnoopProfileId. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.20.1.1 |
igmpSnoopProfileRangeInetAddressTypeThe address type is associated with this agent.
Only ipv4(1) type is supported. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.20.1.2 |
igmpSnoopProfileRangeStartInetAddressThe specified addresses in the start of the controlled
IP multicast addresses. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.20.1.3 |
igmpSnoopProfileRangeEndInetAddressThe specified addresses in the end of the controlled
IP multicast addresses.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.20.1.4 |
igmpSnoopProfileRangeActionThe access mode of the IGMP snooping profile.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.9.20.1.5 |
igmpSnoopFilterPortTableTable for port configuration in IGMP filtering. SEQUENCE OF IgmpSnoopFilterPortEntry .1.3.6.1.4.1.259.10.1.43.1.9.21 |
igmpSnoopFilterPortEntryEntry for port configuration in IGMP filtering. IgmpSnoopFilterPortEntry .1.3.6.1.4.1.259.10.1.43.1.9.21.1 |
igmpSnoopFilterPortIndexThe port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.21.1.1 |
igmpSnoopFilterPortProfileIdThe igmpSnoopProfileEntry identified by a particular value of this index
is the same interface identified by the same value of the igmpSnoopProfileId
object. If there is no corresponding entry in the igmpSnoopProfileTable,
then no association exists. In particular, if this value is zero, no
associated profile will be generated, as zero is not a valid profile index.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.9.21.1.2 |
igmpSnoopThrottlePortTableTable for port configuration in IGMP throttling. SEQUENCE OF IgmpSnoopThrottlePortEntry .1.3.6.1.4.1.259.10.1.43.1.9.22 |
igmpSnoopThrottlePortEntryEntry for port configuration in IGMP throttling. IgmpSnoopThrottlePortEntry .1.3.6.1.4.1.259.10.1.43.1.9.22.1 |
igmpSnoopThrottlePortIndexThe port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.22.1.1 |
igmpSnoopThrottlePortRunningStatusDescribes the running status of the IGMP throttling to the switch.
A value of true(1) indicates the IGMP throttling mechanism is active.
A value of false(2) indicates the IGMP throttling mechanism is inactive.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.9.22.1.2 |
igmpSnoopThrottlePortActionThe action mode of the IGMP throttling. A value of replace(1)
means to replace a joined multicast group randomly when an interface
receives an IGMP report and the number of current joined multicast groups
is equal to the maximum number of IGMP groups that the interface can join.
A value of deny(2) means to deny the IGMP report request when an interface
receives an IGMP report and the number of current joined multicast groups
is equal to the maximum number of IGMP groups that the interface can join.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.9.22.1.3 |
igmpSnoopThrottlePortMaxGroupsThe maximum number of IGMP groups that the interface can join.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.9.22.1.4 |
igmpSnoopThrottlePortCurrentGroupsThe current number of IGMP groups that the interface has joined.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.9.22.1.5 |
igmpSnoopPortTableTable of IGMP Snooping service per port. SEQUENCE OF IgmpSnoopPortEntry .1.3.6.1.4.1.259.10.1.43.1.9.27 |
igmpSnoopPortEntryEntry of IGMP Snooping service per port. IgmpSnoopPortEntry .1.3.6.1.4.1.259.10.1.43.1.9.27.1 |
igmpSnoopPortIndexThe port and the trunk (excluding trunk members)
interface of the igmpSnoopPortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the IF-MIB. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.27.1.1 |
igmpSnoopQueryDropParameter to enable or disable dropping IGMP Query packet.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.9.27.1.3 |
igmpSnoopMulticastDataDropParameter to enable or disable dropping IP multicast datarw Enumeration .1.3.6.1.4.1.259.10.1.43.1.9.27.1.4 |
igmpSnoopPortNumGroupsCurrent learned groupsro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.27.1.5 |
igmpSnoopPortNumJoinSendNumber of join sendro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.27.1.6 |
igmpSnoopPortNumJoinsNumber of join recievedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.27.1.7 |
igmpSnoopPortNumJoinSuccessNumber of join group successro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.27.1.8 |
igmpSnoopPortNumLeavesSendNumber of leave sendro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.27.1.9 |
igmpSnoopPortNumLeavesNumber of leave receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.27.1.10 |
igmpSnoopPortNumGeneralQuerySendNumber of general query send.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.27.1.11 |
igmpSnoopPortNumGeneralQueryReceviedNumber of general query received.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.27.1.12 |
igmpSnoopPortNumSepcificQuerySendNumber of specific query send.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.27.1.13 |
igmpSnoopPortNumSpecificQueryReceivedNumber of specific query received.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.27.1.14 |
igmpSnoopPortNumInvalidReportNumber of invalid report received.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.27.1.15 |
igmpSnoopPortClearStatisticsClear this VLAN all statisticsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.9.27.1.16 |
igmpSnoopGlobalMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.9.28 |
igmpSnoopProxyReportingParameter to enable or disable IGMP snooping proxy reporting
on the device.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.28.1 |
igmpSnoopRouterAlertOptionCheckParameter to enable or disable IGMP snooping router alert
option check on the device.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.28.2 |
igmpSnoopTcnFloodParameter to enable or disable IGMP snooping tcn flood
on the device.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.28.3 |
igmpSnoopTcnQuerySolicitParameter to enable or disable IGMP snooping tcn query
solicit on the device.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.28.4 |
igmpSnoopUnregisteredDataFloodParameter to enable or disable IGMP snooping Unregistered
data flood solicit on the device.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.28.5 |
igmpSnoopUnsolicitedReportIntervalSetting this value to specify how long (in seconds) the
uplink ports should transmit unsolicited reports.rw Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.28.6 |
igmpSnoopVersionExclusiveParameter to enable or disable IGMP snooping version
exclusive on the device.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.28.7 |
igmpSnoopMrouterForwardModeParemete to set IGMP snooping Mrouter port forward mode.
When set dynamic, IGMP snooping Mrouter port won't forward multicast streams received from other mrouter port.
When set forward, IGMP snooping Mrouter port will forward multicast streams received from other mrouter port.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.9.28.8 |
igmpSnoopForwardingPriorityConfigure IGMP snooping multicast stream forwarding priority.
If value is 65535, it means the priority is disabledrw Integer32(0..7|65535) .1.3.6.1.4.1.259.10.1.43.1.9.29 |
igmpSnoopQueryDropTableTable of IGMP Snooping query drop per vlan and per vlan configuration. SEQUENCE OF IgmpSnoopQueryDropEntry .1.3.6.1.4.1.259.10.1.43.1.9.30 |
igmpSnoopQueryDropEntryEntry of IGMP Snooping service per port and per VLAN. IgmpSnoopQueryDropEntry .1.3.6.1.4.1.259.10.1.43.1.9.30.1 |
igmpSnoopQueryDropPortIndexThe port and the trunk (excluding trunk members)
interface of the igmpSnoopPortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the IF-MIB. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.30.1.1 |
igmpSnoopQueryDropVlanBitmapThe VLAN bitmap which query drop applied on this port.
If all zero, it means disable,
For all VLAN, please use igmpSnoopPortTable to configure.rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.9.30.1.2 |
igmpSnoopClearDynamicGroupsClear all IGMP groups which are learned by IGMP report and MVR.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.9.32 |
igmpSnoopVlanTableTable of IGMP Snooping service per port. SEQUENCE OF IgmpSnoopVlanEntry .1.3.6.1.4.1.259.10.1.43.1.9.33 |
igmpSnoopVlanEntryEntry of IGMP Snooping service per VLAN. IgmpSnoopVlanEntry .1.3.6.1.4.1.259.10.1.43.1.9.33.1 |
igmpSnoopVlanIndexVLAN ID VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.9.33.1.1 |
igmpSnoopVlanNumGroupsCurrent learned groupsro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.33.1.2 |
igmpSnoopVlanNumJoinSendNumber of join send.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.33.1.3 |
igmpSnoopVlanNumJoinsNumber of join receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.33.1.4 |
igmpSnoopVlanNumJoinSuccessNumber of jion successro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.33.1.5 |
igmpSnoopVlanNumLeavesSendNumber of leave send.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.33.1.6 |
igmpSnoopVlanNumLeavesNumber of leave receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.33.1.7 |
igmpSnoopVlanNumGeneralQuerySendNumber of general query sendro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.33.1.8 |
igmpSnoopVlanNumGeneralQueryReceviedNumber of general query receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.33.1.9 |
igmpSnoopVlanNumSepcificQuerySendNumber of specific query sendro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.33.1.10 |
igmpSnoopVlanNumSpecificQueryReceivedNumber of sepcific query receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.33.1.11 |
igmpSnoopVlanNumInvalidReportNumber of invalid report receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.9.33.1.12 |
igmpSnoopVlanClearStatisticsClear this VLAN statisticsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.9.33.1.13 |
ipMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.10 |
netConfigTableA table of netConfigEntry. SEQUENCE OF NetConfigEntry .1.3.6.1.4.1.259.10.1.43.1.10.1 |
netConfigEntryA set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.
The index is composed of the ifIndex assigned to the
corresponding interface. NetConfigEntry .1.3.6.1.4.1.259.10.1.43.1.10.1.1 |
netConfigIfIndexThe VLAN interface being used by this table entry. Only the
VLAN interfaces which have an IP configured will appear in
the table. Integer32 .1.3.6.1.4.1.259.10.1.43.1.10.1.1.1 |
netConfigIPAddressThe IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask is 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out what these
values should be. If BOOTP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device). IpAddress .1.3.6.1.4.1.259.10.1.43.1.10.1.1.2 |
netConfigSubnetMaskThe subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out what these
values should be. If BOOTP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device). IpAddress .1.3.6.1.4.1.259.10.1.43.1.10.1.1.3 |
netConfigPrimaryInterfaceWhether this is a primary interface.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.10.1.1.4 |
netConfigUnnumberedWhether this is an unnumbered interface.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.10.1.1.5 |
netConfigStatusThe status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.10.1.1.6 |
netDefaultGatewayThe IP Address of the default gateway. If this value is
undefined or unknown, it shall have the value 0.0.0.0.rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.10.2 |
ipHttpStateWhether HTTP is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.10.3 |
ipHttpPortThe port number for HTTP.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.10.4 |
ipDhcpRestartWhen set to restart(1) the DHCP server will restart. When read,
this value always returns noRestart(2).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.10.5 |
ipHttpsStateWhether HTTPS is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.10.6 |
ipHttpsPortThe port number for HTTPS.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.10.7 |
dhcpMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.10.11 |
dhcpClient OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.10.11.1 |
dhcpcOptions OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.10.11.1.1 |
dhcpcInterfaceTableTable for DHCP client information listed by interface.
Depending on the nature of the product, this table may
have only one entry(e.g. for the management VLAN), or
may have many entries(e.g. for all ports, or for all
static VLANs). SEQUENCE OF DhcpcInterfaceEntry .1.3.6.1.4.1.259.10.1.43.1.10.11.1.1.1 |
dhcpcInterfaceEntryEntry for DHCP client information listed by interface. DhcpcInterfaceEntry .1.3.6.1.4.1.259.10.1.43.1.10.11.1.1.1.1 |
dhcpcIfIndexThis is defined by ifIndex in the IF-MIB.(static vlan if index) Integer32 .1.3.6.1.4.1.259.10.1.43.1.10.11.1.1.1.1.1 |
dhcpcIfVendorClassIdModeWhether the vendor class ID is in text mode or in
Hex mode.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.10.11.1.1.1.1.4 |
dhcpcIfVendorClassIdThe value that the DHCP client sets in the vendor
class_id option of DHCPDISCOVER and DHCPREQUEST messages.
This value may be used by DHCP servers to identify vendor
classof the client.rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.10.11.1.1.1.1.5 |
dhcpRelay OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.10.11.2 |
dhcpRelayRestartSet this object to restart(1) to restart DCHP Relay.
Always get noRestart(2) when you read this variable.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.10.11.2.3 |
dhcpRelayServerInetAddrTableThe role of DHCP Relay Agent is to forward requests and replies
between server and client when they are not in the same subnet. To
enable DHCP Relay service user needs to specify Relay Server IP
address and then restart DHCP Relay. This Table is to specify Relay
Server IP address,the maximum numbers of server IP address user can
specify is 5.To Restart DHCP Relay, please use the dhcpRelayRestart
variable. SEQUENCE OF DhcpRelayServerInetAddrEntry .1.3.6.1.4.1.259.10.1.43.1.10.11.2.4 |
dhcpRelayServerInetAddrEntryA conceptual row of dhcpRelayServerAddrTable. DhcpRelayServerInetAddrEntry .1.3.6.1.4.1.259.10.1.43.1.10.11.2.4.1 |
dhcpRelayServerInetAddrIfIndexThe VLAN interface being used by this table entry. Integer32 .1.3.6.1.4.1.259.10.1.43.1.10.11.2.4.1.1 |
dhcpRelayServerInetAddrIndexThe Index of the Relay server IP address. Integer32 .1.3.6.1.4.1.259.10.1.43.1.10.11.2.4.1.2 |
dhcpRelayServerInetAddressTypeThe INET address type of the relay server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.10.11.2.4.1.3 |
dhcpRelayServerInetAddressThe INET address of the relay server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.10.11.2.4.1.4 |
dhcpOption82 OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.10.11.4 |
dhcpOption82StatusSet enabled(1) to enable DHCP Relay Option 82,
set disabled(2) to disable it.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.10.11.4.1 |
dhcpOption82PolicyProvide three policies to handle packetrw Enumeration .1.3.6.1.4.1.259.10.1.43.1.10.11.4.2 |
dhcpOption82RemoteIDModeProvide five mode for insertion remote-id sub-option of option 82.
If configured-string(5) has been set, dhcpOption82RemoteIDString
will take effect.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.10.11.4.3 |
dhcpOption82RemoteIDStringSet string to remote-id sub-option of option 82.
It only take effect when dhcpOption82RemoteIDMode is set to configured-string(5)rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.10.11.4.4 |
dhcpOption82EncodeFormatSet encode format for CID and RID in option82.
Set extra-subtype-included(1) will have extra subtype and length field in CID and RID.
Set no-extra-subtype-included(2) will only have TLV format for CID and RID.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.10.11.4.5 |
dhcpOption82RelayServerAddrTableThis table is to specify relay server IP address,
the maximum number of server IP addresses user can specify is 5. SEQUENCE OF DhcpOption82RelayServerAddrEntry .1.3.6.1.4.1.259.10.1.43.1.10.11.4.6 |
dhcpOption82RelayServerAddrEntryA conceptual row of dhcpOption82RelayServerAddrTable. DhcpOption82RelayServerAddrEntry .1.3.6.1.4.1.259.10.1.43.1.10.11.4.6.1 |
dhcpOption82RelayServerAddrIndexThe index of the relay server IP address. Integer32 .1.3.6.1.4.1.259.10.1.43.1.10.11.4.6.1.1 |
dhcpOption82RelayServerAddrServerIpThe IP address of the relay server.rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.10.11.4.6.1.2 |
pingMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.10.15 |
pingIpAddressSpecifies the IP address of the device that is planned
to ping.rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.10.15.1 |
pingPacketSizeSpecifies the size of each data potion of ping packets
in bytes.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.10.15.2 |
pingCompletedA value of true(1) will be read when this ping operation has
been either responded to or changed to the time-out status.
A value of false(2) will be read when there is a ping
operation running and all associated objects in the pingMgt
operation cannot be modified during this period.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.10.15.4 |
pingActionThe action of the pingMgt operation. Sets these objects to
pingStart(2) to begin the ping operation. Once the action
is set to pingStart(2), the associated pingMgt objects cannot
be modified until this ping operation is completed
(pingCompleted is true). When the ping has ended or there is
no ping operation performing, this object will get a value of
noAction(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.10.15.5 |
pingProbeCountSpecifies the number of times to perform a ping operation at a
remote host.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.10.15.6 |
pingSentPacketsThe value of this object reflects the number of probes sent.
The value of this object must be reported as 0 when no probes
have been sent.ro INTEGER .1.3.6.1.4.1.259.10.1.43.1.10.15.7 |
pingReceivedPacketsNumber of responses received. The value of this object must
be reported as 0 when no probe responses have been received.ro INTEGER .1.3.6.1.4.1.259.10.1.43.1.10.15.8 |
pingPacketLossRatePacket loss rate of this ping operation. This variable is
calculated by pingReceivedPackets and pingSentPackets. The
rate is expressed as a percentage.ro INTEGER .1.3.6.1.4.1.259.10.1.43.1.10.15.9 |
pingHistoryTableContains the executive result information for the ping
operation. SEQUENCE OF PingHistoryEntry .1.3.6.1.4.1.259.10.1.43.1.10.15.10 |
pingHistoryEntryA conceptual row in the pingHistory table. PingHistoryEntry .1.3.6.1.4.1.259.10.1.43.1.10.15.10.1 |
pingHistoryIndexA new entry in this table is created when the result of
a ping probe is determined. The old entries will be cleared
when a new ping action is started. Integer32 .1.3.6.1.4.1.259.10.1.43.1.10.15.10.1.1 |
pingHistoryResponseThis variable represents the round trip time and is
measured in milliseconds. The variable is the difference
between received time and sent time for a ping probe. If
the difference value is more than the time-out value or no
response is received, then the variable will be 5000
milliseconds.ro Integer32 UNITS "milliseconds" .1.3.6.1.4.1.259.10.1.43.1.10.15.10.1.2 |
arpCacheDeleteAllTo delete all dynamic entries in the ARP cache,
write this variable to delete(1). Writing this variable
to noDelete(2) has no effect on the device. When
read, this variable always returns noDelete(2). This object
is only for Layer 2 switch.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.10.17 |
vlanMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.12 |
vlanTableTable for VLAN configuration. SEQUENCE OF VlanEntry .1.3.6.1.4.1.259.10.1.43.1.12.1 |
vlanEntryEntry for VLAN configuration. VlanEntry .1.3.6.1.4.1.259.10.1.43.1.12.1.1 |
vlanIndexBased on dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.12.1.1.1 |
vlanAddressMethodMethod to get the IP address.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.12.1.1.2 |
vlanPortTableTable for port configuration in VLAN. SEQUENCE OF VlanPortEntry .1.3.6.1.4.1.259.10.1.43.1.12.2 |
vlanPortEntryEntry for port configuration in VLAN. VlanPortEntry .1.3.6.1.4.1.259.10.1.43.1.12.2.1 |
vlanPortIndexThe port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of dot1qPvid in the Q-BRIDGE-MIB. Integer32 .1.3.6.1.4.1.259.10.1.43.1.12.2.1.1 |
vlanPortModeThis variable sets the 802.1Q VLAN mode.
Setting it to hybrid(1) sets a hybrid link.
Setting it to dot1qTrunk(2) sets a trunk link.
Setting it to access(3) sets an access link.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.12.2.1.2 |
vlanPortPrivateVlanTypeThe port type defined for private VLAN.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.12.2.1.3 |
voiceVlanMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.12.6 |
voiceVlanOuiTableA table containing the mac address which can be identified
by Voice VLAN. SEQUENCE OF VoiceVlanOuiEntry .1.3.6.1.4.1.259.10.1.43.1.12.6.1 |
voiceVlanOuiEntryA table containing the mac address which can be identified
by Voice VLAN. VoiceVlanOuiEntry .1.3.6.1.4.1.259.10.1.43.1.12.6.1.1 |
voiceVlanOuiAddressMAC address can be identified by voice vlan.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.12.6.1.1.1 |
voiceVlanOuiMaskThe mask of MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.12.6.1.1.2 |
voiceVlanOuiDescriptionThe description of OUI.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.12.6.1.1.3 |
voiceVlanOuiStatusCurrent operation status of the row.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.12.6.1.1.4 |
voiceVlanEnabledIdVoice VLAN enabled status and VLAN ID:
enabled (1..4093), disabled (-1).rw INTEGER (-1|1..4093) .1.3.6.1.4.1.259.10.1.43.1.12.6.2 |
voiceVlanAgingTimeVoice VLAN aging time, the unit of which is minute.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.12.6.3 |
voiceVlanPortTableA list of voice VLAN port entries. SEQUENCE OF VoiceVlanPortEntry .1.3.6.1.4.1.259.10.1.43.1.12.6.7 |
voiceVlanPortEntryAn entry containing Voice VLAN port information,
which is applicable to a Voice VLAN enabled interface. VoiceVlanPortEntry .1.3.6.1.4.1.259.10.1.43.1.12.6.7.1 |
voiceVlanPortIfIndexThe index of interface on which Voice VLAN function
is enabled. Integer32 .1.3.6.1.4.1.259.10.1.43.1.12.6.7.1.1 |
voiceVlanPortModeVoice VLAN configuration mode status.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.12.6.7.1.2 |
voiceVlanPortSecurityIf the security is enabled, the port only allows voice
traffic for the Voice VLAN.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.12.6.7.1.3 |
voiceVlanPortPriorityThe priority of the voice vlan traffic in the port.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.12.6.7.1.4 |
voiceVlanPortRuleOuiThe address of voice device is learned from
OUI table.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.12.6.7.1.5 |
voiceVlanPortRuleLldpThe address of voice device is learned from
LLDP discovery.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.12.6.7.1.6 |
voiceVlanPortRemainAgeRemaining aging time, the unit of which is minute.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.12.6.7.1.7 |
dot1vProtocolExPortTableA table that contains protocol Vlan priority information. SEQUENCE OF Dot1vProtocolExPortEntry .1.3.6.1.4.1.259.10.1.43.1.12.10 |
dot1vProtocolExPortEntryA list of protocol VLAN user priority sets for each port. Dot1vProtocolExPortEntry .1.3.6.1.4.1.259.10.1.43.1.12.10.1 |
dot1vProtocolExPortGroupPrioritySpecifies the priority in the added tag for qualified frames.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.12.10.1.1 |
macVlanTableA table that contains the settings for MAC-based VLAN. SEQUENCE OF MacVlanEntry .1.3.6.1.4.1.259.10.1.43.1.12.11 |
macVlanEntryA conceptual row in the macVlanTable. MacVlanEntry .1.3.6.1.4.1.259.10.1.43.1.12.11.1 |
macVlanMacAddressThe MAC address that may specify an entry in the table
which contains MAC-based VLAN information. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.12.11.1.1 |
macVlanIdSpecifies the VLAN ID which the MAC address associates
with.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.12.11.1.2 |
macVlanPrioritySpecifies the priority whcich the MAC address associates
with.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.12.11.1.3 |
macVlanStatusSet this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.12.11.1.4 |
macVlanMacMaskThe MAC address mask that may specify an entry in the table
which contains MAC-based VLAN information. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.12.11.1.5 |
macVlanClearActionAction for clearing macVlanTable. When this object is set
to clear(2), all entries in macVlanTable will be cleared.
When this object is read, the value of this object is
always noClear(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.12.12 |
subnetVlanTableA table that contains the settings for IP subnet-based
VLAN. SEQUENCE OF SubnetVlanEntry .1.3.6.1.4.1.259.10.1.43.1.12.13 |
subnetVlanEntryA conceptual row in the subnetVlanTable. SubnetVlanEntry .1.3.6.1.4.1.259.10.1.43.1.12.13.1 |
subnetVlanIpAddressThe IPv4 address of a subnet. Any assignment (implicit or
otherwise) of an instance of this object to a value x must
be rejected if the bitwise logical-AND of x with the value
of the corresponding instance of the subnetVlanMask object
is not equal to x. IpAddress .1.3.6.1.4.1.259.10.1.43.1.12.13.1.1 |
subnetVlanMaskThe netmask of a subnet. Any assignment (implicit or
otherwise) of an instance of this object to a value x must
be rejected if the bitwise logical-AND of x with the value
of the corresponding instance of the subnetVlanIpAddress
object is not equal to subnetVlanIpAddress. IpAddress .1.3.6.1.4.1.259.10.1.43.1.12.13.1.2 |
subnetVlanIdSpecifies the VLAN ID which the subnet associates with.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.12.13.1.3 |
subnetVlanPrioritySpecifies the priority whcich the subnet associates with.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.12.13.1.4 |
subnetVlanStatusSet this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.12.13.1.5 |
subnetVlanClearActionAction for clearing subnetVlanTable. When this object is
set to clear(2), all entries in subnetVlanTable will be
cleared. When this object is read, the value of this object
is always noClear(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.12.14 |
vlanStaticExtTableThe extension table of dot1qVlanStaticTable. This table
enhances the original table with extra
vlanStaticExtRspanStatus to create and destroy RSPAN
VLAN(s). SEQUENCE OF VlanStaticExtEntry .1.3.6.1.4.1.259.10.1.43.1.12.15 |
vlanStaticExtEntryA conceptual row in the vlanStaticExtTable. VlanStaticExtEntry .1.3.6.1.4.1.259.10.1.43.1.12.15.1 |
vlanStaticExtRspanStatusDisplays type of a VLAN is vlan(2) or rspanVlan(3). Set
this to destroy(1) to destroy a RSPAN VLAN. Set this to
rspanVlan(3) to create a RSPAN VLAN. Setting this to
vlan(2) is not allowed.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.12.15.1.1 |
vlanStaticTableTable for static VLAN configuration including VLAN aggregation support. SEQUENCE OF VlanStaticEntry .1.3.6.1.4.1.259.10.1.43.1.12.17 |
vlanStaticEntryStatic information for a VLAN configured on the device by (local or
network) management. VlanStaticEntry .1.3.6.1.4.1.259.10.1.43.1.12.17.1 |
vlanStaticIndexThe VLAN ID of the VLAN. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.12.17.1.1 |
vlanStaticInterfaceTypeThe interface type of the VLAN (there is a subtype of IANAifType).
l2vlan(135) refers to L2 interface and can't accept any L3 related
configuration. l3ipvlan(136) refers to L3 interface and can accept
L3 related configuration.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.12.17.1.2 |
priorityMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.13 |
prioWrrPortTableTable for per port weighted round robin (WRR). SEQUENCE OF PrioWrrPortEntry .1.3.6.1.4.1.259.10.1.43.1.13.12 |
prioWrrPortEntryEntry for per port weighted round robin (WRR). PrioWrrPortEntry .1.3.6.1.4.1.259.10.1.43.1.13.12.1 |
prioWrrPortIfIndexThe port interface of the prioWrrPortEntry. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.13.12.1.1 |
prioWrrPortTrafficClassTraffic class for this entry, as defined in
dot1dTrafficClass in the P-BRIDGE-MIB. The actual
maximum depends on the hardware, and is
equal to dot1dPortNumTrafficClasses-1. Integer32 .1.3.6.1.4.1.259.10.1.43.1.13.12.1.2 |
prioWrrPortWeightWeight for this entry. Value of the object should be
ignored when prioQueueMode is strictAndWrr(3), and
prioWrrPortStrictStatus is enabled(1).rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.13.12.1.3 |
prioWrrPortStrictStatusThis object is used when prioSchedModePort is
strictAndWrr(4).rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.13.12.1.4 |
prioSchedModePortTableTable for per port scheduling mode. SEQUENCE OF PrioSchedModePortEntry .1.3.6.1.4.1.259.10.1.43.1.13.15 |
prioSchedModePortEntryEntry for per port scheduling mode. PrioSchedModePortEntry .1.3.6.1.4.1.259.10.1.43.1.13.15.1 |
prioSchedModePortIndexThe port interface of the prioSchedModePortEntry. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.13.15.1.1 |
prioSchedModePortThe scheduling mode status of ethernet port.
wrr(1),strict(2), strict-wrr(4)rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.13.15.1.2 |
trapDestMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.14 |
trapVar OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.14.2 |
trapIpFilterRejectModeThis variable is for trap var binding,
indicated the ipfilter reject mode.
web(1),
snmp(2),
telnet(3).ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.14.2.6 |
trapIpFilterRejectIpThis variable is for trap var binding,
indicating the IP address that rejected by the ipfilter.ro IpAddress .1.3.6.1.4.1.259.10.1.43.1.14.2.7 |
trapVarMacAddrThe MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.14.2.10 |
trapVarLoginUserNameThe name of the user who logs into the switch.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.14.2.11 |
trapVarSessionTypeThe method by which the user logs in to control the
switch.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.14.2.12 |
trapVarLoginInetAddressTypeThe address type of the address associated with this agent.
Only IPv4 and IPv6 types are supported.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.14.2.15 |
trapVarLoginInetAddressThe IP address from which the user logs into the switch.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.14.2.16 |
trapIpFilterRejectInetAddressTypeThis variable is for trap var binding, indicating
the IP address that was rejected by the IP filter.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.14.2.17 |
trapIpFilterRejectInetAddressThis variable is for trap var binding, indicating
the IP address that was rejected by the IP filter.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.14.2.18 |
trapAutoUpgradeResultThe parameter indicates which result triggers the trap.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.14.2.22 |
trapAutoUpgradeNewVerThe parameter indicates new version which was upgraded to.
When trapAutoUpgradeResult was failed(2), it would be
null string.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.14.2.23 |
trapIfIndexThis variable is for trap var binding,
indicating the index of an interface.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.14.2.30 |
trapVlanIdThis variable is for trap var binding,
indicating the identifier of a VLAN.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.14.2.31 |
trapDhcpClientPortIfIndexifIndex for the port connected to DHCP rogue server.ro INTEGER .1.3.6.1.4.1.259.10.1.43.1.14.2.62 |
trapDhcpServerIpAddressThe IP address of the rogue server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.14.2.63 |
trapSfpThresholdAlarmWarnIfIndexifIndex for the port issued alarm/warning trap.ro INTEGER .1.3.6.1.4.1.259.10.1.43.1.14.2.64 |
trapSfpThresholdAlarmWarnTypeSFP's alarm/warning type .ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.14.2.65 |
trapUdldPortShutdownReasonThis variable is for trap var binding,
indicated the reason for the UDLD port shutdown.
unidirectionalLink(1): unidirectional link detected,
mismatchWithNeighbor(2): mismatch with neighbor state reported.
transmitToReceiveLoop(3): transmit-to-receive loop detected.
aggressiveModeFailure(4): aggressive mode failure detected.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.14.2.66 |
trapDhcpServerMacAddressThe MAC address of the rogue server.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.14.2.67 |
trapMacNotifyActionThe parameter indicates which result triggers the trap.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.14.2.68 |
qosMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.16 |
rateLimitMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.16.1 |
rateLimitPortTableTable for rate limit of each port. SEQUENCE OF RateLimitPortEntry .1.3.6.1.4.1.259.10.1.43.1.16.1.2 |
rateLimitPortEntryEntry for rate limit of each port. RateLimitPortEntry .1.3.6.1.4.1.259.10.1.43.1.16.1.2.1 |
rlPortIndexThe port and the trunk (including trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.16.1.2.1.1 |
rlPortInputStatusWhether input rate limit is enabled for this port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.16.1.2.1.6 |
rlPortOutputStatusWhether output rate limit is enabled for this port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.16.1.2.1.7 |
rlPortInputLimitInKiloValue of the input rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.1.2.1.10 |
rlPortOutputLimitInKiloValue of the output rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.1.2.1.11 |
rlPortLimitInKiloResolutionPresent the rate's resolution. Its unit is kilobits per
secondro Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.1.2.1.12 |
cosMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.16.3 |
prioIfClassificationModeTableTable for setting the interface Qos mapping classification mode. SEQUENCE OF PrioIfClassificationModeEntry .1.3.6.1.4.1.259.10.1.43.1.16.3.2 |
prioIfClassificationModeEntryEntry for setting the interface Qos mapping classification mode. PrioIfClassificationModeEntry .1.3.6.1.4.1.259.10.1.43.1.16.3.2.1 |
prioIfClassificationModeIfThe port or trunk interface of the device. The interface identified by
a particular value of this index is the same interface as identified
by the same value of ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.16.3.2.1.1 |
prioIfClassificationModeStatusThe Qos mapping classification mode of the interface. cos mode means
that the internal priority is mapped from priority field of packet's
VLAN tag if a VLAN tag exists; IP precedence mode means that the
internal priority is mapped from the IP precedence value of IP
packets; DSCP mode means the internal priority is mapped from the dscp
value of IP packets.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.3.2.1.2 |
prioCosToDscpTableTable for CoS/CFI to internal QoS label mapping. SEQUENCE OF PrioCosToDscpEntry .1.3.6.1.4.1.259.10.1.43.1.16.3.3 |
prioCosToDscpEntryEntry for CoS/CFI to internal QoS label mapping. PrioCosToDscpEntry .1.3.6.1.4.1.259.10.1.43.1.16.3.3.1 |
prioCosToDscpIfValueThe port or the trunk interface of the device. The interface
identified by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.16.3.3.1.1 |
prioCosToDscpCosValueThe CoS value (0 to 7) mapped to an internal QoS label value which is
composed of PHB (3 bits) and drop precedence (2 bits). Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.3.3.1.2 |
prioCosToDscpCFIValueThe CFI value (0 or 1) mapped to an internal QoS label value which is
composed of PHB (3 bits) and drop precedence (2 bits). Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.3.3.1.3 |
prioCosToDscpPhbValueThe PHB value of internal QoS label.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.3.3.1.5 |
prioDscpToDscpTableTable for DSCP to internal QoS label mapping. This table setting will
take effect only when the interface Qos mapping classification mode is
set to DSCP mode. SEQUENCE OF PrioDscpToDscpEntry .1.3.6.1.4.1.259.10.1.43.1.16.3.5 |
prioDscpToDscpEntryEntry for ingress DSCP to internal QoS label mapping. PrioDscpToDscpEntry .1.3.6.1.4.1.259.10.1.43.1.16.3.5.1 |
prioDscpToDscpIfValueThe port or trunk interface of the device. The interface identified by
a particular value of this index is the same interface as identified
by the same value of ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.16.3.5.1.1 |
prioDscpToDscpIngressDscpValueThe ingress DSCP value which will be mapped to internal QoS label
value. Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.3.5.1.2 |
prioDscpToDscpPhbValueThe PHB value of internal QoS label.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.3.5.1.4 |
diffServMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.16.4 |
diffServPolicyMapTableTable for policy map. SEQUENCE OF DiffServPolicyMapEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.10 |
diffServPolicyMapEntryEntry for policy map. DiffServPolicyMapEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.10.1 |
diffServPolicyMapIndexAn index that uniquely identifies an entry in this table. Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.10.1.1 |
diffServPolicyMapNameThe name of this entry.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.16.4.10.1.2 |
diffServPolicyMapDescriptionThe description of this entry.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.16.4.10.1.3 |
diffServPolicyMapElementIndexListThe octet string containes the diffServPolicyMapElementEntry
indexes. Two octets express one index and it is represented
in network order. This index list indicates the
diffServPolicyMapEntrys which belong to this entry.ro OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.16.4.10.1.4 |
diffServPolicyMapStatusThis object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active');it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.10.1.5 |
diffServPolicyMapAttachCtl OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.16.4.11 |
diffServPolicyMapAttachCtlIndexIndex for attachment control.
Specifies the policy map as the target to relate with
the policy map element. The policy map identified by
a particular value of this index is associated with
the same diffServPolicyMapEntry as identified by the
same value of diffServPolicyMapIndex.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.11.1 |
diffServPolicyMapAttachCtlElementIndexElement Index for attachment control.Specifies the policy map
element to relate with the policy map. The policy map element
identified by a particular value of this index is associated
with the same diffServPolicyMapElementEntry as identified by
the same value of diffServPolicyMapElementIndex.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.11.2 |
diffServPolicyMapAttachCtlActionAction for attachment control. When setting this object to
attach(2) to begin the attaching operation, a particular
policy map element is attached to a particular policy map.
When setting this object to detach(3) to begin the not
attached operation, a particular policy map element is not
attached to a particular policy map. When the action is
finshed or no action is taken, the value of this object is
noAction(1). A particular policy map is specified in the
diffServPolicyMapAttachCtlIndex. A particularpolicy map
element is specified in the
diffServPolicyMapAttachCtlElementIndex.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.11.3 |
diffServPolicyMapElementTableTable for policy map element. SEQUENCE OF DiffServPolicyMapElementEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.12 |
diffServPolicyMapElementEntryEntry for policy map element. DiffServPolicyMapElementEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.12.1 |
diffServPolicyMapElementIndexAn index that uniquely identifies an entry in this table. Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.12.1.1 |
diffServPolicyMapElementClassMapIndexSpecifies the class map binding to this entry. The class map
identified by a particular value of this index is associated
with the same diffServClassMapEntry as identified by the same
value of diffServClassMapIndex.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.12.1.2 |
diffServPolicyMapElementMeterIndexSpecifies the meter binding to this entry. The meter
identified by a particular value of this index is associated
with the same diffServMeterEntry as identified by the same
value of diffServMeterIndex. If this value is
zero, no associated meter will be associated, as zero is not a
valid meter index.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.12.1.3 |
diffServPolicyMapElementActionIndexSpecifies the action binding to this entry. The action
identified by a particular value of this index is associated
with the same diffServActionEntry as identified by the same
value of diffServActionIndex.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.12.1.4 |
diffServPolicyMapElementStatusThis object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.12.1.5 |
diffServClassMapTableTable for class map. SEQUENCE OF DiffServClassMapEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.13 |
diffServClassMapEntryEntry for class map. DiffServClassMapEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.13.1 |
diffServClassMapIndexAn index that uniquely identifies an entry in this table. Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.13.1.1 |
diffServClassMapNameThe name of this entry.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.16.4.13.1.2 |
diffServClassMapDescriptionThe description of this entry.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.16.4.13.1.3 |
diffServClassMapMatchTypeThe map match type of this entry.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.13.1.4 |
diffServClassMapElementIndexTypeListThe octet string containes the type of class map element
indexes. Two octets which are represented in network order
express one type of the class map element index in network
order and it maps the index of
differServClasssMapElementIndexList in order. When the type is
macAce(1), the maping index of
differServClasssMapElementIndexList is the
diffServMacAceEntry. When the type is ipAce(2), the maping
index of differServClasssMapElementIndexList is the
diffServIpAceEntry. When the type is acl(3), the maping index
of differServClasssMapElementIndexList is the diffServAclEntry.
When the type is ipv6Ace(4), the maping index of
differServClasssMapElementIndexList is the diffServIpv6AceEntry.ro OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.16.4.13.1.5 |
diffServClassMapElementIndexListThe octet string containes the class map element indexes. Two
octets express one index and it is represented in
network order. This index list indicates the particular
class map elements which belong to this table. The class map
element uses type to indicate diffServAclEntry, the
diffServIpAceEntry or diffServMacAceEntry. The type is two
octet specified in differServClasssMapElementIndexTypeList
in order. When the type is macAce(1), the maping index of
differServClasssMapElementIndexList is the
diffServMacAceEntry. When the type is ipAce(2), the maping
index of differServClasssMapElementIndexList is the
diffServIpAceEntry. When the type is acl(3), the maping index
of differServClasssMapElementIndexList is the diffServAclEntry.
When type is ipv6Ace(4), the maping index of
differServClasssMapElementIndexList is the
diffServIpv6AceEntry.ro OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.16.4.13.1.6 |
diffServClassMapStatusThis object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.13.1.7 |
diffServClassMapAttachCtl OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.16.4.14 |
diffServClassMapAttachCtlIndexIndex for attachment control. Specifies the class map as
the target to relate with class map elements. The class
map identified by a particular value of this index is
associated with the same diffServClassMapEntry as
identified by the same value of diffServClassMapIndex.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.14.1 |
diffServClassMapAttachCtlElementIndexTypeElement Index for attachment control. Specifies the type of
class map element to relate with the class map. When type is
macAce(1), the index of diffServClassMapAttachCtlElementIndex
is the index of diffServMacAceEntry. When the type is
ipAce(2), the index of diffServClassMapAttachCtlElementIndex
is the index of diffServIpAceEntry. When the type is acl(3),
the index of diffServClassMapAttachCtlElementIndex is the
index of diffServAclEntry. When type is ipv6Ace(4), the index of
diffServClassMapAttachCtlElementIndex is the index of
diffServIpv6AceEntry.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.14.2 |
diffServClassMapAttachCtlElementIndexElement Index for attachment control. Specifies the class map
element related with the class map. The class map element uses
type to indicate diffServAclEntry, the diffServIpAceEntry or
diffServMacAceEntry. The type is specified in
diffServClassMapAttachCtlElementIndexType. When
the type is macAce(1), the maping index of
differServClasssMapElementIndexList is the
diffServMacAceEntry. When the type is ipAce(2), the maping
index of differServClasssMapElementIndexList is the
diffServIpAceEntry. When the type is acl(3), the maping index
of differServClasssMapElementIndexList is the
diffServAclEntry. When type is ipv6Ace(4), the maping index of
differServClasssMapElementIndexList is the diffServIpv6AceEntry.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.14.3 |
diffServClassMapAttachCtlActionAction for attachment control. When setting this object to
attach(2) to begin the attaching operation, a particular class
map element is attached to a particular class map. When
setting this object to detach(3) to begin the not attached
operation, then a particular class map element is not attached
to a particular class map. When the action is finshed whether
successfully or not, or no action is taken, the value of this
object always is noAction(1). The value of a particular class
map is specified in the AclAttachCtlTargetIndex. The class map
element is specified by diffServClassMapAttachCtlElementIndexType
and diffServClassMapAttachCtlElementIndex.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.14.4 |
diffServAclTableTable for ACL. SEQUENCE OF DiffServAclEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.15 |
diffServAclEntryEntry for ACL. DiffServAclEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.15.1 |
diffServAclIndexAn index that uniquely identifies an entry in the ACL
table. Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.15.1.1 |
diffServAclNameThe name of this entry.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.16.4.15.1.2 |
diffServAclTypeThe type of this entry. When the value of ACL type is
modified, then the ACEs in the diffServAclAceIndexList of
this entry will be auto-removed, and this entry will be auto-
unbound from the diffServPortTable and the
diffServClassMapTable.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.15.1.3 |
diffServAclAceIndexListThe octet string containes the ACE indexes. Two octets
express one index and it is represented in network
order. This index list indicates the particular ACEs which
belong to this table. The ACE uses type to indicate the
diffServMacAceEntry, the diffServIpAceEntry, the
diffServIpv6AceEntry or the diffServArpAceEntry. The type is
specified in diffServAclType. When the type is mac(1), the
index of diffServAclAceIndexList is the diffServMacAceEntry.
When the type is ipstandard(2) or ipextended(3), the index of
diffServAclAceIndexList is the diffServIpAceEntry. When the
type is ipv6standard(4) or ipv6extended(5), the index of
diffServAclAceIndexList is the diffServIpv6AceEntry. When the
type is arp(6), the index of diffServAclAceIndexList is the
diffServArpAceEntry.ro OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.16.4.15.1.4 |
diffServAclStatusThis object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.15.1.5 |
diffServAclAttachCtl OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.16.4.16 |
diffServAclAttachCtlIndexIndex for attachment control. Specifies the ACL as the
target to relate with the IP ACE, the MAC ACE or IPv6 ACE.
The ACL identified by a particular value of this index is
associated with the same diffServAclEntry as identified by
the same value of diffServAclIndex.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.16.1 |
diffServAclAttachCtlAceTypeType for attachment control. Specifies the type of
diffServAclAttachCtlAceIndex to relate with the
diffServAclAttachCtlIndex. When the type is macAce(1), the
index of diffServAclAceIndexList is the diffServMacAceEntry.
When the type is ipAce(2), the index of
diffServAclAceIndexList is the diffServIpAceEntry. When the
type is ipv6Ace(3), the index of diffServAclAceIndexList
is the diffServIpv6AceEntry. When the type is arpAce(4), the
index of diffServAclAceIndexList is the diffServArpAceEntry.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.16.2 |
diffServAclAttachCtlAceIndexIndex for attachment control. Specifies the ACE to relate with
the diffServAclAttachCtlIndex. When
diffServAclAttachCtlAceType is macAce(1), the value of
diffServAclAttachCtlIndex is the diffServMacAceEntry. When
diffServAclAttachCtlAceType is ipAce(2), the value of
diffServAclAttachCtlIndex is the diffServIpAceEntry. When
diffServAclAttachCtlAceType is ipv6Ace(3), the value of
diffServAclAttachCtlIndex is the diffServIpv6AceEntry. When
diffServAclAttachCtlAceType is arpAce(4), the value of
diffServAclAttachCtlIndex is the diffServArpAceEntry.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.16.3 |
diffServAclAttachCtlActionAction for attachment control. When setting this object to
attach(2) to begin the attaching operation, a particular ACE
is attached to a particular ACL. When setting this object to
detach(3) to begin the not attached operation, then a
particular ACE is not attached to a particular ACL. When the
action is finshed whether successfully or not, or no action
is taken, the value of this object always is noAction(1), The
value of a particular ACL is specified in the
diffServAclAttachCtlAceType and diffServAclAttachCtlAceIndex.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.16.4 |
diffServIpAceTableTable for IP ACE. SEQUENCE OF DiffServIpAceEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.17 |
diffServIpAceEntryEntry for IP ACE. DiffServIpAceEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1 |
diffServIpAceIndexAn index that uniquely identifies an entry in the IP ACE
table. Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.1 |
diffServIpAceTypeThe specified IP ACE type. When the type of this entry is
modified, then this entry will be auto-unbound from the
diffServAclEntry and the not supporting field of this entry
will be set 0.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.2 |
diffServIpAceAccessIndicates the action to be taken if a packet matches this
ACE.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.3 |
diffServIpAceSourceIpAddrThe specified source IP address. The packet's source address
is AND-ed with the value of IpAceSourceIpAddrBitmask and then
compared against the value of this object.rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.4 |
diffServIpAceSourceIpAddrBitmaskThe specified source IP address mask. The packet's source
address is AND-ed with the value of IpAceSourceIpAddr and
then compared against the value of this object.rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.5 |
diffServIpAceDestIpAddrThe specified destination IP address. The packet's
destination address is AND-ed with the value of
diffServIpAceDestIpAddrBitmask and then compared against the
value of this object. This object may not be modified if the
associated diffServIpAceType object is equal to standard(1).rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.6 |
diffServIpAceDestIpAddrBitmaskThe specified destination IP address mask. This object may
not be modified if the associated diffServIpAceType object
is equal to standard(1).rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.7 |
diffServIpAceProtocolThe protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
of 0 matches every IP packet. The object=256 means 'any'. For
example: 0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP
encapsulation, 6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50
is ESP, 51 is AH, 88 is IGRP, 89 is OSPF, 94 is KA9Q/NOS
compatible IP over IP, 103 is PIMv2, 108 is PCP. This object
may not be modified if the associated diffServIpAceType object
is equal to standard(1).rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.8 |
diffServIpAcePrecSpecifies the IP precedence value to match against. The value
of this object is ignored whenever the value of
diffServIpAcePrec object is 8. This object may not be modified
if the associated diffServIpAceType object is equal to
standard(1).rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.9 |
diffServIpAceDscpSpecifies the DSCP value to match against. The value of this
object is ignored whenever the value of diffServIpAcePrec
object is 64. This object may not be modified if the
associated diffServIpAceType object is equal to standard(1).rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.11 |
diffServIpAceSourcePortOpIndicates how a packet's source TCP/UDP port number is to be
compared. noOperator(1), which is the default value, means no
comparison is to be made with the source TCP/UDP port
number. equal(2), which is used the
diffServIpAceSourcePortBitmask and the
diffServIpAceMinSourcePort to match against. range(3),which is
used the diffServIpAceMinSourcePort and the
diffServIpAceMaxSourcePort to match against. This object may
not be modified if the associated diffServIpAceType object is
equal to standard(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.12 |
diffServIpAceMinSourcePortIf the diffServIpAceSourcePortOp is range(3), this
indicates the lower bound of the TCP/UDP port number
value range. This object may not be modified if the
associated diffServIpAceType object is equal to
standard(1).rw Integer32 (0..'FFFF'h) .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.13 |
diffServIpAceSourcePortBitmaskIf the diffServIpAceSourcePortOp is equal(2), this indicates
the bitmask of the diffServIpAceMinSourcePort. This object may
not be modified if the associated diffServIpAceType object is
equal to standard(1).rw Integer32 (0..'FFFF'h) .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.15 |
diffServIpAceDestPortOpIndicates how a packet's destination TCP/UDP port number is
to be compared. noOperator(1), which is the default value,
means that no comparison is to be made with the destination
TCP/UDP port number. equal(2), which is used the
diffServIpAceSourcePortBitmask and the
diffServIpAceMinDestPort to match against. range(3),which is
used the diffServIpAceMinDestPort and the
diffServIpAceMaxDestPort to match against. This object may not
be modified if the associated diffServIpAceType object is
equal to standard(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.16 |
diffServIpAceMinDestPortIf the diffServIpAceDestPortOp is range(3), this indicates
the lower bound of the TCP/UDP port number value range. This
object may not be modified if the associated
diffServIpAceType object is equal to standard(1).rw Integer32 (0..'FFFF'h) .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.17 |
diffServIpAceDestPortBitmaskIf the diffServIpAceDestPortOp is equal(2), this indicates
the bitmask of the diffServIpAceMinDestPort. This object may
not be modified if the associated diffServIpAceType object
is equal to standard(1).rw Integer32 (0..'FFFF'h) .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.19 |
diffServIpAceControlCodeIndicates how the control flags of TCP packets are to be
compared. diffServIpAceControlCode is AND-ed with
diffServIpAceControlCodeBitmask. This object may not be
modified if the associated diffServIpAceType object is
equal to standard(1).rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.20 |
diffServIpAceControlCodeBitmaskIndicates how the control flags of TCP packets are to be
compared. It can be used to check multiple flags of the FIN,
SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4,
PSH=8, ACK=16, URG=32. This object may not be modified if the
associated diffServIpAceType object is equal to standard(1).rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.21 |
diffServIpAceStatusThis object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.22 |
diffServMacAceTableTable for MAC ACE. SEQUENCE OF DiffServMacAceEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.18 |
diffServMacAceEntryEntry for MAC ACE. DiffServMacAceEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1 |
diffServMacAceIndexAn index that uniquely identifies an entry in the MAC ACE
table. Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.1 |
diffServMacAceAccessIndicates the action to be taken if a packet matches this
ACE.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.2 |
diffServMacAcePktformatUsed to check the packet format of the packets. This object
cannot be configured when the status of the entry,
diffServMacAceStatus, is active(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.3 |
diffServMacAceSourceMacAddrIndicates the 48-bit source MAC address. The specified source
MAC of the packet. The packet's source MAC address is AND-ed
with the value of diffServMacAceSourceMacAddrBitmask
and then compared against the value of this object.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.4 |
diffServMacAceSourceMacAddrBitmaskThe specified source MAC address mask.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.5 |
diffServMacAceDestMacAddrIndicates the 48-bit destination MAC address. The specified
destination MAC of the packet. The packet's destination MAC
address is AND-ed with the value of
diffServMacAceDestMacAddrBitmask and then compared against
the value of this object.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.6 |
diffServMacAceDestMacAddrBitmaskThe specified destination MAC address mask.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.7 |
diffServMacAceVidOpIndicates how a packet's VID is to be compared. This
object cannot be configured when the status of the entry,
diffServMacAceStatus, is active(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.8 |
diffServMacAceMinVidIndicates the lower bound of the VID value range if the
diffServMacAceVidOp is range(3).rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.9 |
diffServMacAceVidBitmaskThe bit mask of the VID. The default value is 0.rw Integer32 (0..'0FFF'h) .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.10 |
diffServMacAceEtherTypeOpIndicates how a packet's ether type is to be compared.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.12 |
diffServMacAceEtherTypeBitmaskThe bit mask of Ether type. The default value is 0.rw Integer32 (0..'FFFF'h) .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.13 |
diffServMacAceMinEtherTypeIndicates the lower bound of the ether type value range
if the diffServMacAceEtherTypeOp is range(3).rw Integer32 ('0000'h..'FFFF'h) .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.14 |
diffServMacAceStatusThis object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.16 |
diffServMacAceCosOpIndicates how a packet's CoS is compared.
If the object type of diffServMacAceCosOp is equal(2),
diffServMacAceMinCos indicates the CoS value for comparing, and
diffServMacAceCosBitmask is used as the bitmask of the CoS value.
If the object type of diffServMacAceCosOp is range(3),
diffServMacAceMinCos should be used as the lower bound of the CoS value.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.17 |
diffServMacAceCosBitmaskIndicates the bitmask of the CoS value if the object type of
diffServMacAceCosOp is equal(2). The default value is 0.rw INTEGER ('00'h..'07'h) .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.18 |
diffServMacAceMinCosIf the object type of diffServMacAceCosOp is equal(2),
diffServMacAceMinCos indicates the CoS value for comparing.
If the object type of diffServMacAceCosOp is range(3),
diffServMacAceMinCos indicates the lower bound of the CoS value.rw INTEGER ('00'h..'07'h) .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.19 |
diffServActionTableTable for action. SEQUENCE OF DiffServActionEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.19 |
diffServActionEntryEntry for action. DiffServActionEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.19.1 |
diffServActionIndexAn index that uniquely identifies an entry in the
action table. Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.19.1.1 |
diffServActionListThe bitmap value used to identify which action
capabilities are enabled on the entry. The
actionPktNewPri and actionPktNewDscp can not be
enabled at the same time on the entry. The
actionRedPktNewDscp and actionRedDrop can not be
enabled at the same time on the entry.rw Bits .1.3.6.1.4.1.259.10.1.43.1.16.4.19.1.2 |
diffServActionPktNewPriSpecifies the new priority value for the packet when
the action is satisfied. If the actionPktNewPri bit of
the diffServActionList is not enabled, this object can
not be set.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.19.1.3 |
diffServActionPktNewPhbSpecifies the inner priority value for the packet when
the action is satisfied. If the actionPktNewPhb bit of
the diffServActionList is not enabled, this object can
not be set.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.19.1.4 |
diffServActionStatusThis object is used to create a new row, modify or
delete an existing row in this table.
The status column has six defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row
is available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use
by the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically
set to active, making it available for use by the
managed device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management
station wishing to delete all of the instances
associated with an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService'
or 'active'. That is, when queried, an existing
conceptual row has only three states: it is either
available for use by the managed device (the status column
has the value 'active'); it is not available for use by
the managed device, though the agent has sufficient
information to make it so (the status column has the value
'notInService'); or, it is not available for use by the
managed device, and an attempt to make it so would fail
because the agent has insufficient information (the state
column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.19.1.11 |
diffServActionPktNewDscpSpecifies the new DSCP value for the packet when
the action is satisfied. If the actionPktNewDscp bit of
the diffServActionList is not enabled, this object
can not be set.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.19.1.13 |
diffServMeterTableTable for meter. SEQUENCE OF DiffServMeterEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.20 |
diffServMeterEntryEntry for meter. DiffServMeterEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.20.1 |
diffServMeterIndexAn entry that describes a single set of token bucket
parameters. Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.20.1.1 |
diffServMeterModelThe Metering algorithm associated with the Token Bucket
parameters. The zeroDotZero indicates this is unknown.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.20.1.2 |
diffServMeterRateThe token-bucket rate, in kilobits per second (kbps).rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.20.1.3 |
diffServMeterStatusThis object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.20.1.6 |
diffServIpv6AceTableTable for IPv6 ACE. SEQUENCE OF DiffServIpv6AceEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.21 |
diffServIpv6AceEntryEntry fo IPv6 ACE. DiffServIpv6AceEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1 |
diffServIpv6AceIndexAn index that uniquely identifies an entry in the IPv6 table. Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.1 |
diffServIpv6AceTypeThe specified IP v6 ACE type. When the type of this entry is
modified, then this entry will be auto-unbound from the
diffServAclEntry and the not supporting field of this entry
will be set 0.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.2 |
diffServIpv6AceAccessIndicates the action to be taken if a packet matches this
ACE.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.3 |
diffServIpv6AceSourceIpAddrSpecifies the source IPv6 address.rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.4 |
diffServIpv6AceSourceIpAddrPrefixLenThe length (in bits) associated with the source IPv6 address
prefix of this entry.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.5 |
diffServIpv6AceDestIpAddrSpecifies the destination IPv6 address. This object may not be
modified if the associated diffServIpv6AceType object is equal
to standard(1).rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.6 |
diffServIpv6AceDestIpAddrPrefixLenThe length (in bits) associated with the destination IPv6
address prefix of this entry. This object may not be modified
if the associated diffServIpv6AceType object is equal to
standard(1).rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.7 |
diffServIpv6AceNextHeaderSpecifies the next header to match against. This object may not
be modified if the associated diffServIpv6AceType object is equal to
standard(1).rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.8 |
diffServIpv6AceDscpSpecifies the DSCP value to match against. This object may not
be modified if the associated diffServIpv6AceType object is
equal to standard(1).rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.9 |
diffServIpv6AceStatusThis object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.11 |
diffServIpv6AceSourcePortOpIndicates how a packet's source TCP/UDP port number is
to be compared. noOperator(1), which is the default value,
means that no comparison is to be made with the source
TCP/UDP port number. equal(2), which uses the
diffServIpv6AceSourcePort and diffServIpv6AceSourcePortBitmask
to match against. This object may not be modified if the
associated diffServIpv6AceType object is equal to standard(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.13 |
diffServIpv6AceSourcePortIf the diffServIpv6AceSourcePortOp is equal(2), this
indicates the TCP/UDP port number value. Integer32(0..'FFFF'h) .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.14 |
diffServIpv6AceSourcePortBitmaskIf the diffServIpv6AceSourcePortOp is equal(2), this indicates
the bitmask of the diffServIpv6AceSourcePort.rw Integer32(0..'FFFF'h) .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.15 |
diffServIpv6AceDestPortOpIndicates how a packet's destination TCP/UDP port number is
to be compared. noOperator(1), which is the default value,
means that no comparison is to be made with the destination
TCP/UDP port number. equal(2), which uses the
diffServIpv6AceDestPort and diffServIpv6AceDestPortBitmask to
match against. This object may not be modified if the
associated diffServIpv6AceType object is equal to standard(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.16 |
diffServIpv6AceDestPortIf the diffServIpv6AceDestPortOp is equal(2), this
indicates the TCP/UDP port number value.rw Integer32(0..'FFFF'h) .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.17 |
diffServIpv6AceDestPortBitmaskIf the diffServIpv6AceDestPortOp is equal(2), this indicates
the bitmask of the diffServIpv6AceDestPort.rw Integer32(0..'FFFF'h) .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.18 |
diffServArpAceTableThe conceptual table of all of diffServArpAceEntry. SEQUENCE OF DiffServArpAceEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.23 |
diffServArpAceEntryThe conceptual row for diffServArpAceTable. DiffServArpAceEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.23.1 |
diffServArpAceIndexThe unique index of an ACE within an ACL. Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.1 |
diffServArpAceActionIndicates the action to be taken if a packet matches
this ACE. This object cannot not be configured when
the status of the entry, diffServArpAceStatus, is
active(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.2 |
diffServArpAcePktTypeIndicates the packet type to be taken if a packet matches
this ACE. This object can not be configured when the
status of the entry, diffServArpAceStatus, is active(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.3 |
diffServArpAceSourceIpAddrThe specified source ARP address. The packet's source
address is AND'ed with the value of
diffServArpAceSourceIpAddrBitmask and then compared
against the value of this object.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1).rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.4 |
diffServArpAceSourceIpAddrBitmaskThe specified source ARP address mask. The packet's
destination address is AND'ed with the value of
diffServArpAceSourceIpAddr and then compared against the
value of this object.rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.5 |
diffServArpAceDestIpAddrThe specified destination IP address. The packet's
destination address is AND'ed with the value of
diffServArpAceDestIpAddrBitmask and then compared
against the value of this object.rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.6 |
diffServArpAceDestIpAddrBitmaskThe specified destination IP address mask.rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.7 |
diffServArpAceSourceMacAddrIndicates the 48-bit destination MAC address. The
specified source MAC of the packet. The packet's
source MAC address is AND'ed with the value of
aceArpSourceMacAddrBitmask and then compared against
the value of this object. This object cannot be
configured when the status of the entry,
diffServArpAceStatus, is active(1).rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.8 |
diffServArpAceSourceMacAddrBitmaskThe specified source MAC address mask.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1).rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.9 |
diffServArpAceDestMacAddrIndicates the 48-bit destination MAC address.
The specified destination MAC of the packet.
The packet's destination MAC address is AND'ed with the
value of aceArpDestMacAddrBitmask and then compared
against the value of this object. This object cannot be
configured when the status of the entry,
diffServArpAceStatus, is active(1).rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.10 |
diffServArpAceDestMacAddrBitmaskThe specified destination MAC address mask.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1).rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.11 |
diffServArpAceLogStatusIndicates whether to log messages against the packets.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1).rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.12 |
diffServArpAceStatusThe status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.13 |
diffServArpTableThe conceptual table of all of diffServArpEntry. SEQUENCE OF DiffServArpEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.24 |
diffServArpEntryThe conceptual row for diffServArpTable. DiffServArpEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.24.1 |
diffServArpAclNameThe name of an ACL. Within a feature, a unique name is
used to identify the list to which the entry belongs
in the device.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.16.4.24.1.1 |
diffServAclHwCounterTableTable for differentiated services hardware counter on
each port. SEQUENCE OF DiffServAclHwCounterEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.26 |
diffServAclHwCounterEntryEntry for differentiated services hardware counter on
each port. DiffServAclHwCounterEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.26.1 |
diffServAclHwCounterIfIndexThis object is the interface index of diffServPortEntry.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.16.4.26.1.1 |
diffServAclHwCounterDirectionIndicates a particular direction of traffic.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.26.1.2 |
diffServAclHwCounterAclIndexAn index that uniquely identifies an entry in the ACL
table.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.26.1.3 |
diffServAclHwCounterAceIndexAn index that uniquely identifies an entry of an ACL.
This entry might be a compressed ACE (which index is
bigger than SYS_ADPT_MAX_NBRS_OF_ACE_OF_SYSTEM) with
multiple user configured ACEs, and the index of
compressed ACE will not show in ACE table.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.26.1.4 |
diffServAclHwCounterAceHitCountSpecifies the hardware counter of an ACE entry.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.16.4.26.1.5 |
diffServPolicyMapPortTableTable for policy map of each port. SEQUENCE OF DiffServPolicyMapPortEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.27 |
diffServPolicyMapPortEntryEntry for diffServPolicyMapPortTable. DiffServPolicyMapPortEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.27.1 |
diffServPolicyMapPortIfIndexThis object is the interface index of DiffServPolicyMapPortEntry.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.16.4.27.1.1 |
diffServPolicyMapPortDirectionIndicates this policy map effect to
which direction of traffic. Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.27.1.2 |
diffServPolicyMapPortPolicyMapIndexSpecifies the policy map index binded to the interface.
The policy map identified by a particular value of
this index is associated with the same DiffServPolicyMapEntry
as identified by the same value of diffServPolicyMapIndex.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.27.1.3 |
diffServPolicyMapPortStatusThis object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.27.1.4 |
diffServAccessGroupTableTable for specifies access group
for ACL on each port. SEQUENCE OF DiffServAccessGroupEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.28 |
diffServAccessGroupEntryEntry for diffServAccessGroupTable. DiffServAccessGroupEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.28.1 |
diffServAccessGroupIfIndexThis object is the interface index of diffServAccessGroupEntry.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB. If support global ACL,
using the specific ifindex(65535). InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.16.4.28.1.1 |
diffServAccessGroupDirectionIndicates this access group effect to
which direction of traffic. Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.28.1.2 |
diffServAccessGroupTypeSpecifies the access group type,
only support bind one ACL per type on a port. Enumeration .1.3.6.1.4.1.259.10.1.43.1.16.4.28.1.3 |
diffServAccessGroupAclIndexSpecifies the ACL index apply to this access
group. The index uniquely identifies an
entry in diffServAclTable.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.28.1.4 |
diffServAccessGroupTimeRangeNameThe name of the time range entry bound to
the access group. This object should be
equal to one of the timeRangeName objects
in timeRangeTable.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.16.4.28.1.5 |
diffServAccessGroupCounterStatusThe acl counter enable status of this
access group.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.16.4.28.1.6 |
diffServAccessGroupStatusThis object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.16.4.28.1.7 |
diffServTcamTableThe conceptual table of all of DiffServTcamEntry. SEQUENCE OF DiffServTcamEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.29 |
diffServTcamEntryThe conceptual row for diffServTcamTable. DiffServTcamEntry .1.3.6.1.4.1.259.10.1.43.1.16.4.29.1 |
diffServTcamUnitThis object identifies the switch within the system
for which this entry contains information. Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.29.1.1 |
diffServTcamDeviceThe device id of the specified unit. Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.29.1.2 |
diffServTcamPoolThe TCAM pool index of the specified unit and device. Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.29.1.3 |
diffServTcamPoolCapabilityThe bitmap value used to identify which functions
supported on this pool.ro Bits .1.3.6.1.4.1.259.10.1.43.1.16.4.29.1.4 |
diffServTcamTotalThe total number of TCAM pool entry.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.29.1.5 |
diffServTcamFreeThe free number of TCAM pool entry.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.29.1.6 |
diffServTcamUsedThe used number of TCAM pool entry.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.16.4.29.1.7 |
securityMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17 |
privateVlanMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.1 |
privateVlanStatusThis controls whether private VLAN is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.1.1 |
privateVlanUplinkPortsThis is the list of uplink ports for private VLAN.
They should not overlap with privateVlanDownlinkPorts.
0 will be displayed if the privateVlanStatus is disabled.
You must enable the privateVlanStatus before setting this variable.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.1.2 |
privateVlanDownlinkPortsThis is the list of downlink ports for private VLAN.
They should not overlap with privateVlanUplinkPorts.
Multiple port setting is permitted.
0 will be displayed if the privateVlanStatus is disabled.
You must enable the privateVlanStatus before setting this variable.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.1.3 |
privateVlanVlanTableA table containing private VLAN information on the
VLANs which currently exist. SEQUENCE OF PrivateVlanVlanEntry .1.3.6.1.4.1.259.10.1.43.1.17.1.4 |
privateVlanVlanEntryA conceptual row containing the private VLAN
information on the VLANs for a particular management
domain. PrivateVlanVlanEntry .1.3.6.1.4.1.259.10.1.43.1.17.1.4.1 |
privateVlanVlanIndexThe VLAN ID of this private VLAN. Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.1.4.1.1 |
privateVlanVlanTypeThe VLAN type as defined for Private VLAN feature.
Set the value to invalid(1) to destroy an entry. Set
other values to create an entry. If an index
already exists, set others to modifiy it. Note that a VLAN's
private VLAN type cannot be changed once it has
any port members.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.1.4.1.2 |
privateVlanAssoicatedPrimaryVlanThe VLAN ID of the associated primary VLAN used for
the private VLAN feature if privateVlanVlanType has the
value of isolated(3), community(4). If privateVlanVlanType
has the value of primary(2), then this object has the value of 0.
Note that one isolated VLAN can only be associated
with one unique primary VLAN. One primary VLAN can only
be associated with one isolated VLAN.
One primary VLAN can be associated with multiple community VLANs;
one community VLAN can only be associated with one unique primary VLAN.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.1.4.1.3 |
privateVlanPrivatePortTableA table containing information on the configuration of
secondary VLANs on the device ports. SEQUENCE OF PrivateVlanPrivatePortEntry .1.3.6.1.4.1.259.10.1.43.1.17.1.5 |
privateVlanPrivatePortEntryA conceptual row containing information of the
configuration of secondary VLANs for each port. An entry
is created by the managed system for each interface which
can be configured as a private port for Private VLAN
feature. PrivateVlanPrivatePortEntry .1.3.6.1.4.1.259.10.1.43.1.17.1.5.1 |
privateVlanPrivatePortIfIndexThis is defined as the ifIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.1.5.1.1 |
privateVlanPrivatePortSecondaryVlanThe VLAN ID of the secondary VLAN configured on this
private port. A private port is a port that allows
ingress traffic of the secondary VLAN as well as
egress traffic of its associated primary VLAN, but
blocks the egress traffic of the isolated VLAN while
allowing the egress traffic of the community
or twoWayCommunity VLAN depending on the type of the
secondary VLAN.
Note that a port can join a secondary VLAN only after
this secondary VLAN has been associated with a primary
VLAN, i.e., the cpvlanVlanAssociatedPrimaryVlan has a
non-zero value. The default value of 0 for this object
means this port has not yet joined a secondary VLAN.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.1.5.1.2 |
privateVlanPromPortTableA table containing secondary VLAN to primary VLAN remapping
information on ports of the device. SEQUENCE OF PrivateVlanPromPortEntry .1.3.6.1.4.1.259.10.1.43.1.17.1.6 |
privateVlanPromPortEntryA conceptual row containing secondary VLAN to primary
VLAN remapping information for each port.
An entry is created by the managed system for each interface
which can be configured as a promiscuous port for the
private VLAN feature. PrivateVlanPromPortEntry .1.3.6.1.4.1.259.10.1.43.1.17.1.6.1 |
privateVlanPromPortIfIndexThis is defined as ifIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.1.6.1.1 |
privateVlanPromPortPrimaryVlanIdThe primary VLAN ID of the promiscous port.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.1.6.1.2 |
privateVlanPromPortSecondaryRemapA string of octets containing one bit per VLAN in the
management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 0
through 7; the second octet to VLANs 8 through 15; etc.
The most significant bit of each octet corresponds to
the lowest value VlanIndexOrZero in that octet.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.ro OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.17.1.6.1.3 |
privateVlanPromPortSecondaryRemap2kA string of octets containing one bit per VLAN for
VLANs with VlanIndexOrZero values of 1024 through 2047
in the management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 1024
through 1031; the second octet to VLANs 1032 through
1039; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndexOrZero in
that octet.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support
the range of VlanIndexOrZero up to 4095.ro OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.17.1.6.1.4 |
privateVlanPromPortSecondaryRemap3kA string of octets containing one bit per VLAN for
VLANs with VlanIndexOrZero values of 2048 through 3071
in the management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 2048
through 2055; the second octet to VLANs 2056 through
2063; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndexOrZero in
that octet.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support
the range of VlanIndexOrZero up to 4095.ro OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.17.1.6.1.5 |
privateVlanPromPortSecondaryRemap4kA string of octets containing one bit per VLAN for
VLANs with VlanIndexOrZero values of 3072 through 4095
in the management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 3072
through 3079; the second octet to VLANs 3080 through
3087; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndexOrZero in
that octet.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support
the range of VlanIndexOrZero up to 4095.ro OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.17.1.6.1.6 |
privateVlanSessionTableContains the settings for private VLAN Session. SEQUENCE OF PrivateVlanSessionEntry .1.3.6.1.4.1.259.10.1.43.1.17.1.8 |
privateVlanSessionEntryA conceptual row in the privateVlanSession table. PrivateVlanSessionEntry .1.3.6.1.4.1.259.10.1.43.1.17.1.8.1 |
privateVlanSessionIdThe session ID that may specifiy certain entry in the table which contains private
VLAN session information. INTEGER .1.3.6.1.4.1.259.10.1.43.1.17.1.8.1.1 |
privateVlanSessionUplinkPortsThis is the list of uplink ports for a session of private VLAN. They should not
overlap with the privateVlanSessionPortDownlink of the same session, and they
also should not overlap with the privateVlanSessionPortUplink and the
privateVlanSessionPortDownlink of other session.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.1.8.1.2 |
privateVlanSessionDownlinkPortsThis is the list of downlink ports for a session of private VLAN. They should not
overlap with the privateVlanSessionPortUplink of the same session, and they also
should not overlap with the privateVlanSessionPortUplink and the
privateVlanSessionPortDownlink of other session.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.1.8.1.3 |
privateVlanSessionStatusSet this to valid(1) to create an entry. Sets this to
invalid(2) to destroy an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.17.1.8.1.4 |
privateVlanUplinkToUplinkSets this to blocking(2) to deny the traffic of uplink
ports between different sessions. Set this to forwarding(1)
to allow the traffic of uplink ports between different
sessions.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.1.9 |
portSecurityMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.2 |
portSecPortTableThe port security(MAC binding) Table. SEQUENCE OF PortSecPortEntry .1.3.6.1.4.1.259.10.1.43.1.17.2.1 |
portSecPortEntryThe entry of portSecPortTable. PortSecPortEntry .1.3.6.1.4.1.259.10.1.43.1.17.2.1.1 |
portSecPortIndexThe port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.2.1.1.1 |
portSecPortStatusSet enabled(1) to enable port security and set disabled(2) to
disable port security.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.2.1.1.2 |
portSecActionThe corresponding actions that will take place when a
port is under intrusion, when this variable is set to
none(1), no action will be performed, when this variable is
set to trap(2), a swPortSecurityTrap trap will be sent,
when this variable is set to shutdown(3), the port will
shutdown, when this variable is set to
trapAndShutdown(4), a swPortSecurityTrap will be sent
and the port will shutdown.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.2.1.1.3 |
portSecMaxMacCountThe maximun number of MAC addresses that will be learned and locked.
When we change the value of this variable, if the
portSecPortStatus is enabled, we will discard all secure MAC
and begin to learn again, until the number of MAC has reached
this value, and only the secure MAC addresses can enter
this port. If the portSecPortStatus is disabled, we will begin
to learn the MAC, and auto enabled the portSecPortStatus when
the MAC has reached this value.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.2.1.1.4 |
portSecMacAsPermanentMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.2.6 |
portSecMacAsPermanentPortIndexThe port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB. Specifies the interface to
convert the learnt secured MAC address into manual configured.
'0' represents that no interface is specified.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.2.6.1 |
portSecMacAsPermanentActionSet action(2) to convert the learnt secured MAC address into
manual configured. When action finsh or no action, the value
of this object is noAction(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.2.6.2 |
radiusMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.4 |
radiusServerGlobalAuthPortAauthentication port number for RADIUS server.
When specified radius server do not set
aauthentication port number, this value is used.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.4.1 |
radiusServerGlobalAcctPortAccounting port number of RADIUS server.
When specified radius server do not set
accounting port number, this value is used.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.4.2 |
radiusServerGlobalKeyKey for RADIUS. This variable can only be written.
When this variable is read, it always returns a
zero-length string.
When specified radius server do not set
key, this this value is used.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.4.3 |
radiusServerGlobalRetransmitMaximum number of retransmissions for RADIUS.
When specified radius server do not set
maximum number of retransmissions, this value is used.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.17.4.4 |
radiusServerGlobalTimeoutTimeout for RADIUS.
When specified radius server do not set
timeout, this value is used.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.17.4.5 |
radiusServerTableThe table for RADIUS server. SEQUENCE OF RadiusServerEntry .1.3.6.1.4.1.259.10.1.43.1.17.4.7 |
radiusServerEntryThe conceptual row for radiusServerTable. RadiusServerEntry .1.3.6.1.4.1.259.10.1.43.1.17.4.7.1 |
radiusServerIndexThe RADIUS server index in the table. Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.1 |
radiusServerAddressIP address of a RADIUS server.rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.2 |
radiusServerAuthPortNumberAuthentication port number of RADIUS server.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.3 |
radiusServerAcctPortNumberAccounting port number of RADIUS server.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.4 |
radiusServerKeyKey for RADIUS. This variable can only be written.
When this variable is read, it always returns a
zero-length string.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.5 |
radiusServerRetransmitTimeout for RADIUS.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.6 |
radiusServerTimeoutTimeout for RADIUS.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.7 |
radiusServerStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.8 |
tacacsMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.5 |
tacacsPlusServerGlobalPortNumberTCP port number of TACACS+ server.
When specified TACACS+ server do not set
TCP port number, this this value is used.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.5.2 |
tacacsPlusServerGlobalKeyThe encryption key used to encrpt the traffic between client and
TACACS+ server. Do not use blank spaces in the string. This variable
can only be set. When this variable is read, it always returns a
zero-length string.When specified TACACS+ server do not set
the encryption key , this this value is used.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.5.3 |
tacacsPlusServerTableThe table for TACACS+ server. SEQUENCE OF TacacsPlusServerEntry .1.3.6.1.4.1.259.10.1.43.1.17.5.4 |
tacacsPlusServerEntryThe conceptual row for tacacsPlusServerTable. TacacsPlusServerEntry .1.3.6.1.4.1.259.10.1.43.1.17.5.4.1 |
tacacsPlusServerIndexTACACS+ server index. Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.5.4.1.1 |
tacacsPlusServerAddressIP address of a TACACS+ server.rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.17.5.4.1.2 |
tacacsPlusServerPortNumberTCP port number of a TACACS+ server.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.5.4.1.3 |
tacacsPlusServerKeyThe encryption key used to encrpt the traffic between client and
TACACS+ server. Do not use blank spaces in the string. This
variable can only be set. When this variable is read, it always
returns a zero-length string.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.5.4.1.4 |
tacacsPlusServerStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.17.5.4.1.8 |
sshMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.6 |
sshServerStatusThe status of Secure Shell Server. Set this value to
enabled(1) to enable SSH server, set this value to
disabled(2) to disable the SSH server.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.6.1 |
sshServerMajorVersionThe major version of the SSH Server.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.6.2 |
sshServerMinorVersionThe minor version of the SSH Server.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.6.3 |
sshTimeoutThe time interval that the router waits for the SSH
client to respond. The range is 1-120.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.17.6.4 |
sshAuthRetriesThe number of attempts after which the interface is reset.
The range is 1-5.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.17.6.5 |
sshConnInfoTableThe table for Secure Shell Connection. SEQUENCE OF SshConnInfoEntry .1.3.6.1.4.1.259.10.1.43.1.17.6.6 |
sshConnInfoEntryThe conceptual row for sshConnInfoTable. SshConnInfoEntry .1.3.6.1.4.1.259.10.1.43.1.17.6.6.1 |
sshConnIDThe connection ID of the Secure Shell Connection. Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.6.6.1.1 |
sshConnMajorVersionThe SSH major version.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.6.6.1.2 |
sshConnMinorVersionThe SSH minor version.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.6.6.1.3 |
sshConnStatusThe SSH connection State. negotiationStart(1) means the
SSH is in its negotiation start state, authenticationStart(2)
means the SSH is in authentication start state, sessionStart(3)
means the SSH is in session start State.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.6.6.1.5 |
sshConnUserNameThe user name of the connection.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.6.6.1.6 |
sshDisconnectSet the variable to disconnect the connection,
noDisconnect(1) will always be obtained when reading this variable.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.6.6.1.7 |
sshConnEncryptionTypeStrThe encryption type of the SSH.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.6.6.1.8 |
sshKeySizeThe SSH server key size.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.17.6.7 |
sshRsaHostKey1The RSA host key segment 1.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.8 |
sshRsaHostKey2The RSA host key segment 2.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.9 |
sshRsaHostKey3The RSA host key segment 3.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.10 |
sshRsaHostKey4The RSA host key segment 4.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.11 |
sshRsaHostKey5The RSA host key segment 5.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.12 |
sshRsaHostKey6The RSA host key segment 6.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.13 |
sshRsaHostKey7The RSA host key segment 7.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.14 |
sshRsaHostKey8The RSA host key segment 8.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.15 |
sshDsaHostKey1The DSA host key segment 1.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.16 |
sshDsaHostKey2The DSA host key segment 2.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.17 |
sshDsaHostKey3The DSA host key segment 3.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.18 |
sshDsaHostKey4The DSA host key segment 4.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.19 |
sshDsaHostKey5The DSA host key segment 5.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.20 |
sshDsaHostKey6The DSA host key segment 6.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.21 |
sshDsaHostKey7The DSA host key segment 7.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.22 |
sshDsaHostKey8The DSA host key segment 8.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.23 |
sshHostKeyGenActionThis variable is for host key generating.
For the set behavior:
Set it to genRsaKey(2) to generate the RSA host key,
and to genDsaKey(3) to generate the DSA host key,
if genBothKeys(4) is set, both RSA and DSA host key are
generated.
For the get behavior:
You will get genRsaKey(2), genDsaKey(3) or
genBothKeys(4) when the key gen action is in progress.
otherwise, you will get noGen(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.6.24 |
sshHostKeyGenStatusThe result of the last KeyGen status.
if no key gen action has been performed.
you will get unknown(1) status.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.6.25 |
sshHostKeySaveActionTo save host key from memory to flash.
For the set behavior:
Set it to save(2) to perform the save operation.
For the get behavior:
You will get save(1) when the save action is in progress.
Otherwise, you will get noSave(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.6.26 |
sshHostKeySaveStatusThe result of the last savekey status.
If no save action has been performed,
you will get unknown(1) status.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.6.27 |
sshHostKeyDelActionTo delete the host key.
For the set behavior:
Set it to delRsaKey(2) to delete the RSA host key,
to delDsaKey(3) to delete the DSA host key,
or to delBothKeys(4) to delete both RSA and DSA host key.
For the get behavior:
You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4)
when the delete operation is in progress.
Otherwise, you will get noDel(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.6.28 |
sshUserTableThe conceptual table of all of sshUserEntry. SEQUENCE OF SshUserEntry .1.3.6.1.4.1.259.10.1.43.1.17.6.29 |
sshUserEntryThe conceptual row for sshUserTable. SshUserEntry .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1 |
sshUserNameUser Name. DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.1 |
sshUserRsaKey1The RSA user key segment 1.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.2 |
sshUserRsaKey2The RSA user key segment 2.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.3 |
sshUserRsaKey3The RSA user key segment 3.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.4 |
sshUserRsaKey4The RSA user key segment 4.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.5 |
sshUserRsaKey5The RSA user key segment 5.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.6 |
sshUserRsaKey6The RSA user key segment 6.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.7 |
sshUserRsaKey7The RSA user key segment 7.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.8 |
sshUserRsaKey8The RSA user key segment 8.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.9 |
sshUserDsaKey1The DSA user key segment 1.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.10 |
sshUserDsaKey2The DSA user key segment 2.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.11 |
sshUserDsaKey3The DSA user key segment 3.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.12 |
sshUserDsaKey4The DSA user key segment 4.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.13 |
sshUserDsaKey5The DSA user key segment 5.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.14 |
sshUserDsaKey6The DSA user key segment 6.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.15 |
sshUserDsaKey7The DSA user key segment 7.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.16 |
sshUserDsaKey8The DSA user key segment 8.ro KeySegment .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.17 |
sshUserKeyDelActionTo delete the user key.
For the set behavior:
Set it to delRsaKey(2) to delete the RSA user key,
to delDsaKey(3) to delete the DSA user key,
or to delBothKeys(4) to delete both RSA and DSA user key.
For the get behavior:
You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4)
when the delete operation is in progress.
Otherwise, you will get noDel(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.18 |
sshRsaHostKeySHA1FingerPrintThe SHA1 finger print of the RSA host key.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.6.30 |
sshRsaHostKeyMD5FingerPrintThe MD5 finger print of RSA host key.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.6.31 |
sshDsaHostKeySHA1FingerPrintThe SHA1 finger print of the DSA host key.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.6.32 |
sshDsaHostKeyMD5FingerPrintThe MD5 finger print of the DSA host key.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.6.33 |
ipFilterMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.9 |
ipFilterSnmpInetTableA list of IP address entries. SEQUENCE OF IpFilterSnmpInetEntry .1.3.6.1.4.1.259.10.1.43.1.17.9.12 |
ipFilterSnmpInetEntryThis entry includes an IP address range which the system
will allow to connect to this device through SNMP. IpFilterSnmpInetEntry .1.3.6.1.4.1.259.10.1.43.1.17.9.12.1 |
ipFilterSnmpInetAddressTypeThe type of IP address filter.
Only supports IPv4 and IPv6 address types. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.9.12.1.1 |
ipFilterSnmpInetAddressStartThe start IP address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.9.12.1.2 |
ipFilterSnmpInetAddressEndThe end IP address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.9.12.1.3 |
ipFilterSnmpInetStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.17.9.12.1.4 |
ipFilterHttpInetTableA list of IP address entries. SEQUENCE OF IpFilterHttpInetEntry .1.3.6.1.4.1.259.10.1.43.1.17.9.13 |
ipFilterHttpInetEntryThis entry includes an IP address range which the system
will allow to connect to this device through SNMP. IpFilterHttpInetEntry .1.3.6.1.4.1.259.10.1.43.1.17.9.13.1 |
ipFilterHttpInetAddressTypeThe type of IP address filter .
Only supports IPv4 and IPv6 address types. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.9.13.1.1 |
ipFilterHttpInetAddressStartThe start IP address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.9.13.1.2 |
ipFilterHttpInetAddressEndThe end IP address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.9.13.1.3 |
ipFilterHttpInetStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.17.9.13.1.4 |
ipFilterTelnetInetTableA list of IP address entries. SEQUENCE OF IpFilterTelnetInetEntry .1.3.6.1.4.1.259.10.1.43.1.17.9.14 |
ipFilterTelnetInetEntryThis entry includes an IP address range which the system
will allow them to connect to this device through SNMP. IpFilterTelnetInetEntry .1.3.6.1.4.1.259.10.1.43.1.17.9.14.1 |
ipFilterTelnetInetAddressTypeThe type of IP address filter .
Only supports IPv4 and IPv6 address types. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.9.14.1.1 |
ipFilterTelnetInetAddressStartThe start IP address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.9.14.1.2 |
ipFilterTelnetInetAddressEndThe end IP address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.9.14.1.3 |
ipFilterTelnetInetStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.17.9.14.1.4 |
ipFilterAllClientCtl OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.9.15 |
ipFilterAllClientCtlInetAddressTypeThe type of IP address filter. Only supports IPv4 and IPv6
address types.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.9.15.1 |
ipFilterAllClientCtlInetAddressStartThe start IP address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.9.15.2 |
ipFilterAllClientCtlInetAddressEndThe end IP address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.9.15.3 |
ipFilterAllClientCtlActionAction for IP filter control. Set this object to create(2) to
create entries in the ipFilterSnmpInetTable,
ipFilterHttpInetTable and ipFilterTelnetInetTable. Set this
object to destroy(3) to destroy specified entries in the
ipFilterSnmpInetTable, ipFilterHttpInetTable and
ipFilterTelnetInetTable. When the action is finshed, whether
successfully or not, or no action is taken, the value of this
object is always noAction(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.9.15.4 |
userAuthMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.10 |
userAuthEnablePasswordSet enable password or delete enable password. NULL is used to
delete the enable password. The password is starting with
alphanumeric.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.10.3 |
userAuthMethodSet user authencation method for system.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.10.4 |
userAuthTableThis table is for creating the new user. SEQUENCE OF UserAuthEntry .1.3.6.1.4.1.259.10.1.43.1.17.10.5 |
userAuthEntryEntries in this table correspond to the users entries in system. UserAuthEntry .1.3.6.1.4.1.259.10.1.43.1.17.10.5.1 |
userAuthUserNameThe name of the user. The user name is starting with alphanumeric.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.10.5.1.1 |
userAuthPasswordSpecifies the user password. zero length input will set the user enrty
without password. If the user is not exist, it will create the user
with the giving password and privilege 0. The password is starting
with alphanumeric.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.10.5.1.2 |
userAuthPrivilegeSpecifies the user level. If the user does not exist, it will create
the user with the given privilege and no password. Privilege 15
indicates system administrator, privilege 0 indicates guest user.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.10.5.1.3 |
userAuthPublicKeyUser public key, the value can be 'RSA' or 'DSA' or 'Both' or 'None'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.17.10.5.1.4 |
userAuthStatusThis node is used to create the user entry by '1' and to delete one
user entry by '0'.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.10.5.1.5 |
dot1xMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.11 |
dot1xAuthConfigExtTableThe extension table of dot1xAuthConfigTable. SEQUENCE OF Dot1xAuthConfigExtEntry .1.3.6.1.4.1.259.10.1.43.1.17.11.1 |
dot1xAuthConfigExtEntryThe entry of dot1xAuthConfigExtTable. Dot1xAuthConfigExtEntry .1.3.6.1.4.1.259.10.1.43.1.17.11.1.1 |
dot1xAuthConfigExtOperModeThe operation mode of dot1x port which allows host
connection to 802.1x-authorized ports.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.11.1.1.1 |
dot1xAuthConfigExtMultiHostMaxCntThe maximum number of hosts when the
dot1xAuthConfigExtOperMode is multiHost(2). When the
operation Mode is singleHost(1), we can ignore this
variables.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.11.1.1.2 |
dot1xAuthConfigExtPortIntrusionActionResponses to intrusion when the authentication is failed;
block-traffic(1) means that to block traffic when the authentication is failed and
guest-vlan(2) means that to join to a guest VLAN when the authentication is failed.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.11.1.1.3 |
aaaMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.12 |
aaaMethodTableContains the settings needed for accounting. SEQUENCE OF AaaMethodEntry .1.3.6.1.4.1.259.10.1.43.1.17.12.1 |
aaaMethodEntryA conceptual row in the aaaMethodTable. AaaMethodEntry .1.3.6.1.4.1.259.10.1.43.1.17.12.1.1 |
aaaMethodIndexSpecifies the index for the entry. Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.12.1.1.1 |
aaaMethodNameName for the method.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.12.1.1.2 |
aaaMethodGroupNameName for the server to use, pointing to aaaRadiusGroupName
or aaaTacacsPlusGroupName.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.12.1.1.3 |
aaaMethodModestart-stop(1),sends a 'start' accounting notice at the beginning of a process and
a 'stop' accounting notice at the end of a process. The 'start' accounting record
is sent in the background. The requested user process begins regardless of whether or not
the 'start' accounting notice was received by the accounting server.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.12.1.1.4 |
aaaMethodStatusSet to 1 to initiate the aaaMethodTable, 2 to destroy the table.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.17.12.1.1.5 |
aaaMethodClientTypedot1x(1): Provides accounting service for 802.1x activity;
exec(2): Provides accounting service for EXEC connection
such as Telnet, SSH or console; commands(3): Provides
accounting service for command privileges.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.12.1.1.6 |
aaaMethodPrivilegeLevelSpecifies the privilege level for the entry.
When aaaMethodClientType is in the mode of command(3),
the privilege level is enabled to be accessed.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.17.12.1.1.7 |
aaaRadiusGroupTableUses a subset of RADIUS servers for accounting as defined by the server group SEQUENCE OF AaaRadiusGroupEntry .1.3.6.1.4.1.259.10.1.43.1.17.12.2 |
aaaRadiusGroupEntryA conceptual row of aaaRadiusGroupEntry. AaaRadiusGroupEntry .1.3.6.1.4.1.259.10.1.43.1.17.12.2.1 |
aaaRadiusGroupIndexSpecifies the index for the entry. Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.12.2.1.1 |
aaaRadiusGroupServerBitMapIdentifies which RADIUS sever to use, each bit points to each radius server.
80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radius 2.rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.17.12.2.1.2 |
aaaRadiusGroupNameUses a subset of servers for accounting as
defined by the server group. The same name as aaaTacasPlusGroupName is not allowed.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.17.12.2.1.3 |
aaaRadiusGroupStatusSet to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.17.12.2.1.4 |
aaaTacacsPlusGroupTableUses a subset of TACACS+ servers for accounting as defined by the server group SEQUENCE OF AaaTacacsPlusGroupEntry .1.3.6.1.4.1.259.10.1.43.1.17.12.3 |
aaaTacacsPlusGroupEntryA conceptual row of aaaTacacsPlusGroupEntry. AaaTacacsPlusGroupEntry .1.3.6.1.4.1.259.10.1.43.1.17.12.3.1 |
aaaTacacsPlusGroupIndexSpecifies the index for the entry. Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.12.3.1.1 |
aaaTacacsPlusGroupServerBitMapIdentifies which TACACS+ sever to use.rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.17.12.3.1.2 |
aaaTacacsPlusGroupNameUses a subset of servers for accounting as
defined by the server group. We can't have the same name as aaaRadiusGroupNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.17.12.3.1.3 |
aaaTacacsPlusGroupStatusSet to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.17.12.3.1.4 |
aaaUpdateSpecifies the periodic interim accounting records to be sent
to the accounting server and periodic intervals to send accounting update records(in minutes).rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.12.4 |
aaaAccountTableSpecifies an interface or a set of interfaces that the
accounting method list will be applied to. SEQUENCE OF AaaAccountEntry .1.3.6.1.4.1.259.10.1.43.1.17.12.5 |
aaaAccountEntryA conceptual row of aaaAccountTable. AaaAccountEntry .1.3.6.1.4.1.259.10.1.43.1.17.12.5.1 |
aaaAccountIfIndexDefined as the ifIndex InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.12.5.1.1 |
aaaAccountMethodNameSpecifies the name of the list of accounting methods to use.
If no method name is specified, the system uses the default.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.17.12.5.1.2 |
aaaAccountProtocolGet the protocol type of a list method to know which server (RADIUS or TACACS+) is in use.ro INTEGER .1.3.6.1.4.1.259.10.1.43.1.17.12.5.1.3 |
aaaAccountStatusSet to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.17.12.5.1.4 |
aaaCommandPrivilegesTableContains the settings needed for command privileges. SEQUENCE OF AaaCommandPrivilegesEntry .1.3.6.1.4.1.259.10.1.43.1.17.12.8 |
aaaCommandPrivilegesEntryA conceptual row in the aaaCommandPrivilegesTable. AaaCommandPrivilegesEntry .1.3.6.1.4.1.259.10.1.43.1.17.12.8.1 |
aaaCommandPrivilegesLevelSpecifies the privilege level index for the entry. INTEGER .1.3.6.1.4.1.259.10.1.43.1.17.12.8.1.1 |
aaaCommandPrivilegesInterfaceIndexSpecifies the interface index for the entry. Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.12.8.1.2 |
aaaCommandPrivilegesMethodNameSpecifies the method name in the lists under
the mode of command privileges.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.12.8.1.3 |
aaaAccExecTableSpecifies an interface or a set of interfaces that the
accounting method list will be applied to. SEQUENCE OF AaaAccExecEntry .1.3.6.1.4.1.259.10.1.43.1.17.12.9 |
aaaAccExecEntryA conceptual row of aaaAccExecTable. AaaAccExecEntry .1.3.6.1.4.1.259.10.1.43.1.17.12.9.1 |
aaaAccExecIndexThe method of accessing CLI management. Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.12.9.1.1 |
aaaAccExecMethodNameSpecifies the name of the list of accounting methods to use.
If no method name is specified, the system uses the default.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.17.12.9.1.2 |
networkAccessMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.13 |
networkAccessPortTableA table contains the information of network access about every port. SEQUENCE OF NetworkAccessPortEntry .1.3.6.1.4.1.259.10.1.43.1.17.13.2 |
networkAccessPortEntryA conceptual row in the networkAccessPort table. NetworkAccessPortEntry .1.3.6.1.4.1.259.10.1.43.1.17.13.2.1 |
networkAccessPortPortIndexThe port and the trunk (excluding trunk members) interface of the
portTable. The interface identified by a particular value of this port
index is the same interface identified by the same value of
ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.13.2.1.1 |
networkAccessPortDynamicVlanSets enabled(1) to enable dynamic VLAN assigment and
sets disabled(2) to disable dynamic VLAN assigment.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.13.2.1.2 |
networkAccessPortMacFilterSpecifies the MAC filter ID, Set this variable to zero to
disable MAC filter.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.17.13.2.1.5 |
networkAccessPortGuestVlanSpecifies the guest VLAN ID. To disable the VLAN, set the value to 0.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.17.13.2.1.6 |
networkAccessPortDynamicQosSet this object to enabled(1) to enable Dynamic QoS.
Set this object to disabled(2) to disable Dynamic QoS.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.13.2.1.10 |
networkAccessClearMacAddressMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.13.3 |
networkAccessClearMacAddressAttributeAttribute for clearing Mac address. Specifies the certain attribute
in Mac address table. all(1) indicates both reauthorized and learnt
secure MAC address; static(2) indicates reauthorized MAC address;
dynamic(3) indicates learnt secure MAC address.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.13.3.1 |
networkAccessClearMacAddressMacAddressSpecifies MAC address in the MAC address table for clearing
MAC address. '000000' represents that no MAC address is specified.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.17.13.3.2 |
networkAccessClearMacAddressPortThe specifies port in the MAC address table for clearing MAC address.
'0' represents that no port is specified.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.17.13.3.3 |
networkAccessClearMacAddressActionAction for clearing MAC address . When setting this object to clear(2)
to begin the clearing MAC address operation, a particular MAC address
is cleared from the MAC address table. When the action is finshed whether
or not it is successful or no action is taken, the value of this object
is always noclear(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.13.3.4 |
networkAccessMacAddressTableContains the information of network access MAC addresses. SEQUENCE OF NetworkAccessMacAddressEntry .1.3.6.1.4.1.259.10.1.43.1.17.13.4 |
networkAccessMacAddressEntryA conceptual row in the networkAccessMacAddress table. NetworkAccessMacAddressEntry .1.3.6.1.4.1.259.10.1.43.1.17.13.4.1 |
networkAccessMacAddressAddressSpecifies the authenticated MAC address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.17.13.4.1.1 |
networkAccessMacAddressPortSpecifies the port of authenticated MAC address. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.13.4.1.2 |
networkAccessMacAddressInetAddressTypeThis object indicates the type of IP address denoted in
networkAccessMacAddressRadiusServerInetAddress type.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.13.4.1.3 |
networkAccessMacAddressRadiusServerInetAddressDisplays the IP address of radius server that authenticates
the specified Mac address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.13.4.1.4 |
networkAccessMacAddressTimeDisplays the authentication time of the authenticated MAC address.
The following form is a text string; 'yyyy MMm DDd HHh MMm SSs'.
'yyyy' is a four-digit year. 'MM' is a month. A single-digit month is
preceded by a zero. 'DD' is the day of a month. A single-digit day
is preceded by the value zero. 'HH', 'MM' and 'SS' are hour,
minute, and second respectively. A single-digit hour, minute,
and second are preceded by a zero value. An example is:
'2001y 01m 01d 00h 04m 43s'.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.17.13.4.1.5 |
networkAccessMacAddressAttributeDisplays the attribute of an authenticated MAC address.
static(1) indicates resauthorized secure MAC address.
dynamic(2) indicates learnt secure MAC address.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.17.13.4.1.6 |
networkAccessAgingSet this object to enabled(1) to enable MAC address aging feature.
Set this object to disabled(2) to disable MAC address aging feature.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.13.5 |
networkAccessMacFilterWithMaskTableContains the settings for MAC filter. SEQUENCE OF NetworkAccessMacFilterWithMaskEntry .1.3.6.1.4.1.259.10.1.43.1.17.13.6 |
networkAccessMacFilterWithMaskEntryA conceptual row in the networkAccessMacFilterWithMaskTable. NetworkAccessMacFilterWithMaskEntry .1.3.6.1.4.1.259.10.1.43.1.17.13.6.1 |
networkAccessMacFilterWithMaskIDSpecifies the MAC filter ID. INTEGER .1.3.6.1.4.1.259.10.1.43.1.17.13.6.1.1 |
networkAccessMacFilterWithMaskMacAddressSpecifies the MAC address to be filtered. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.17.13.6.1.2 |
networkAccessMacFilterWithMaskMacAddressMaskSpecifies the MAC mask to be filtered. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.17.13.6.1.3 |
networkAccessMacFilterWithMaskStatusSet this object to valid(1) to create an entry.
Set this object to invalid(2) to destroy an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.17.13.6.1.4 |
dosMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.16 |
system OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.16.1 |
dosSmurf OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.16.1.3 |
dosSmurfStatusThe status of Smurf protection. Set this to enabled(1)
to enable the feature, and set this to disabled(2) to
disable the feature.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.16.1.3.1 |
dosTcpNullScan OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.16.1.5 |
dosTcpNullScanStatusThe status of TCP Null-scan protection. Set this to
enabled(1) to enable the feature, and set this to
disabled(2) to disable the feature.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.16.1.5.1 |
dosTcpSynFinScan OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.16.1.6 |
dosTcpSynFinScanStatusThe status of TCP SYN FIN scan protection. Set this to
enabled(1) to enable the feature, and set this to
disabled(2) to disable the feature.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.16.1.6.1 |
dosTcpXmasScan OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.16.1.7 |
dosTcpXmasScanStatusThe status of TCP Xmas-scan protection. Set this to
enabled(1) to enable the feature, and set this to
disabled(2) to disable the feature.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.16.1.7.1 |
dosTcpUdpPortZero OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.17.16.1.11 |
dosTcpUdpPortZeroStatusThe status of checking for TCP/UDP packets with port 0.
Set this to enabled(1) to enable the feature, and
set this to disabled(2) to disable the feature.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.17.16.1.11.1 |
sysLogMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.19 |
sysLogStatusWhether the system log is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.19.1 |
sysLogHistoryFlashLevelSeverity level for logging to flash.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.19.2 |
sysLogHistoryRamLevelSeverity level for logging to RAM.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.19.3 |
remoteLogMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.19.6 |
remoteLogStatusWhether the remote log system is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.19.6.1 |
remoteLogLevelSeverity level for remote log.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.19.6.2 |
remoteLogFacilityTypeThe facility type for remote log.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.19.6.3 |
remoteLogServerInetTableA table for storing the remote log server list. SEQUENCE OF RemoteLogServerInetEntry .1.3.6.1.4.1.259.10.1.43.1.19.6.7 |
remoteLogServerInetEntryA conceptual row for remoteLogServerInetTable. RemoteLogServerInetEntry .1.3.6.1.4.1.259.10.1.43.1.19.6.7.1 |
remoteLogServerInetAddressTypeIndicates the type of address
denoted in remoteLogServerInetAddress type.
Only ipv4(1), ipv6(2) and ipv6z(4)
types are supported. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.19.6.7.1.1 |
remoteLogServerInetAddressThe IP address of the remote log Server. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.19.6.7.1.2 |
remoteLogServerStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.19.6.7.1.3 |
remoteLogServerUdpPortThe UDP port number of the remote log Serverrw Integer32 .1.3.6.1.4.1.259.10.1.43.1.19.6.7.1.4 |
smtpMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.19.7 |
smtpStatusSet enabled(1) to enable the SMTP, set disabled(2) to disable
the SMTP.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.19.7.1 |
smtpSeverityLevelSpecify the SMTP minimum severity level to send the event message.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.19.7.2 |
smtpSourceEMailSMTP source email address,
the sender's mail address that appears
in the 'From' field of the mail.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.19.7.3 |
smtpServerIpTableThe SMTP server IP table.
The maximum servers to be added is 3. SEQUENCE OF SmtpServerIpEntry .1.3.6.1.4.1.259.10.1.43.1.19.7.4 |
smtpServerIpEntryA conceptual row of the smtpServerIpTable. SmtpServerIpEntry .1.3.6.1.4.1.259.10.1.43.1.19.7.4.1 |
smtpServerIpSMTP mail server's IP address.ro IpAddress .1.3.6.1.4.1.259.10.1.43.1.19.7.4.1.1 |
smtpServerIpStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.19.7.4.1.2 |
smtpDestEMailTableThe table of the destination e-mail address.
The maximum numbers of destination email address to be added is 5. SEQUENCE OF SmtpDestEMailEntry .1.3.6.1.4.1.259.10.1.43.1.19.7.5 |
smtpDestEMailEntryA conceptual row of the smtpDestEMailTable. SmtpDestEMailEntry .1.3.6.1.4.1.259.10.1.43.1.19.7.5.1 |
smtpDestEMailSMTP destination e-mail address. DisplayString .1.3.6.1.4.1.259.10.1.43.1.19.7.5.1.1 |
smtpDestEMailStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.19.7.5.1.2 |
sysLogCommandLogStatusSet enabled(1) to enable command log, set disabled(2) to disable
command log.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.19.10 |
lineMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.20 |
consoleMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.20.1 |
consoleDataBitsNumber of data bits.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.20.1.1 |
consoleParityDefines the generation of a parity bit.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.20.1.2 |
consoleBaudRateBaud rate: Valid values are 115200, 57600, 38400,
19200, and 9600.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.20.1.3 |
consoleStopBitsThe console stop bits, valid values are stopbits1(1) or stopbits2(2)rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.20.1.4 |
consoleExecTimeoutIn a serial console, use the consoleExecTimeout
variable to set the interval that the EXEC command
interpreter waits until user input is detected;
set the value to 0 to disable it.rw Integer32 (0 | 60..65535) .1.3.6.1.4.1.259.10.1.43.1.20.1.5 |
consolePasswordThresholdThe number of failed console logon attempts that may be
made before the system will not accept a further attempt
in the time specified by consoleSilentTime. A value of 0
disables the functionality.rw Integer32 (0 | 1..120) .1.3.6.1.4.1.259.10.1.43.1.20.1.6 |
consoleSilentTimeThe length of time that the management console is
inaccessible after the number of failed logon
attempts has reached consolePasswordThreshold. A value
of 0 disables the functionality.rw Integer32 (0 | 1..65535) .1.3.6.1.4.1.259.10.1.43.1.20.1.7 |
consoleLoginResponseTimeoutConsole login response timeout setting.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.20.1.10 |
telnetMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.20.2 |
telnetStatusTo enable or disable the telnet function. Any new telnet
request will be rejected and all current telnet sessions
will be terminated if this status is set to disabled(2).rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.20.2.4 |
telnetPortNumberThe telnet session port number.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.20.2.5 |
vtyMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.20.3 |
vtyExecTimeoutSpecifies the interval that the system waits for user input
before terminating the current session.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.20.3.1 |
vtyPasswordThresholdThe number of failed logon attempts that may be made before the
system will not accept a further attempt to log on.
Setting to 0 means disabled.rw Integer32 (0 | 1..120) .1.3.6.1.4.1.259.10.1.43.1.20.3.2 |
vtyLoginResponseTimeoutLogin response timeout setting.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.20.3.3 |
vtyMaxSessionThe maximum number of allowed sessions.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.20.3.4 |
vtySilentTimeThe time the system waits before etablishing a new session
after the number of failed logins reaches the specified limit.
Setting to 0 means disabled.rw Integer32 (0 | 1..65535) UNITS "seconds" .1.3.6.1.4.1.259.10.1.43.1.20.3.5 |
sysTimeMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.23 |
sntpMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.23.1 |
sntpStatusSet enabled(1) to enable the SNTP, set disabled(2) to disable
the SNTP.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.23.1.1 |
sntpServiceModeService mode.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.23.1.2 |
sntpPollIntervalPolling interval.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.23.1.3 |
sntpServerTableTable for SNTP servers. IP addresses
must occupy contiguous indexes, starting from 1.
If a removed entry is not the last entry, the table
will be shifted to contiguous indexes automatically. SEQUENCE OF SntpServerEntry .1.3.6.1.4.1.259.10.1.43.1.23.1.4 |
sntpServerEntryEntry for SNTP servers. SntpServerEntry .1.3.6.1.4.1.259.10.1.43.1.23.1.4.1 |
sntpServerIndexThe index of a server. Integer32 .1.3.6.1.4.1.259.10.1.43.1.23.1.4.1.1 |
sntpServerInetAddressTypeIndicates the type of address
denoted in sntpServerInetAddress type.
Only ipv4(1), ipv6(2) and ipv6z(4)
types are supported.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.23.1.4.1.4 |
sntpServerInetAddressThe IP address of a time server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.23.1.4.1.5 |
sntpServerStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.23.1.4.1.6 |
sysCurrentTimeThis is a text string in the following form, based on Unix:
'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters
of the English name of the month. '_d' is the day of month.
A single-digit day is preceded by a space. 'hh:mm:ss' is
a 24-hour representations of hours, minutes, and seconds.
A single-digit hour is preceded by a zero. 'yyyy' is a
four-digit year. An example is: 'Jan 1 02:03:04 2002'.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.23.2 |
sysTimeZoneThis is a text string in the following form: '[s]hh:mm'.
'[s]' is a plus-or-minus sign. For UTC, this is omitted.
For a positive offset, this is '+'. For a negative offset,
this is '-'. 'hh:mm' in the hour and minute offset from UTC.
A single-digit hour is preceded by a zero. When
sysTimeZonePredefined object is set to any value other than
none(1), this object will be empty string.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.23.3 |
sysTimeZoneNameThe name of the time zone. When sysTimeZonePredefined object
is set to any value other than none(1), this object will be
empty string.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.23.4 |
ntpMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.23.5 |
ntpStatusSet enabled(1) to enable the NTP, set disabled(2) to disable
the NTP.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.23.5.1 |
ntpServiceModeService mode.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.23.5.2 |
ntpPollIntervalPolling interval in seconds.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.23.5.3 |
ntpAuthenticateStatusSet enabled(1) to enable the NTP Authenticate, set disabled(2) to
disable the NTP.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.23.5.4 |
ntpServerTableTable for NTP servers SEQUENCE OF NtpServerEntry .1.3.6.1.4.1.259.10.1.43.1.23.5.5 |
ntpServerEntryEntry for NTP servers. NtpServerEntry .1.3.6.1.4.1.259.10.1.43.1.23.5.5.1 |
ntpServerIpAddressThe IP address of a server. Valid IP addresses
must occupy contiguous indexes.
All IP addresses after the last valid index is 0. IpAddress .1.3.6.1.4.1.259.10.1.43.1.23.5.5.1.1 |
ntpServerVersionNTP version.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.23.5.5.1.2 |
ntpServerKeyIdKey for a NTP server. This variable can only be written.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.23.5.5.1.3 |
ntpServerStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.23.5.5.1.4 |
ntpAuthKeyTableTable for NTP Authentication keys SEQUENCE OF NtpAuthKeyEntry .1.3.6.1.4.1.259.10.1.43.1.23.5.6 |
ntpAuthKeyEntryEntry for NTP Authentication keys. NtpAuthKeyEntry .1.3.6.1.4.1.259.10.1.43.1.23.5.6.1 |
ntpAuthKeyIdThe index of a Authentication key. This table has fixed size. Integer32 .1.3.6.1.4.1.259.10.1.43.1.23.5.6.1.1 |
ntpAuthKeyWordThe Authentication key word is used to created a key by the MD5
And the max length is 32.rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.23.5.6.1.2 |
ntpAuthKeyStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.23.5.6.1.3 |
fileMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.24 |
fileCopyMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.24.1 |
fileCopySrcOperTypefileCopySrcOperType specifies where to copy from,
and fileCopyDestOperType specifies where to copy to.
Possible combinations of 'fileCopySrcOperType to
fileCopyDestOperType' and required parameters are listed in
the following table.
+-
Source | Destination | Required parameters
+-
file(1) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
+
| runningCfg(2) | fileCopySrcFileName
+
| startUpCfg(3) | fileCopySrcFileName
| | fileCopyDestFileName
+
| tftp(4) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+
| unit(5) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyUnitId
+
| ftp(7) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+
| sftp(10) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+-
runningCfg(2) | file(1) | fileCopyDestFileName
+
| startUpCfg(3) | fileCopyDestFileName
+
| tftp(4) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+
| ftp(7) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+
| sftp(10) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+-
startUpCfg(3) | file(1) | fileCopyDestFileName
+
| runningCfg(2) | None.
+
| tftp(4) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+
| ftp(7) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+
| sftp(10) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+-
tftp(4) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+
| runningCfg(2) | fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+
| startUpCfg(3) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+
| addRunningCfg(15)| fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+-
unit(5) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyUnitId
+-
ftp(7) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+
| runningCfg(2) | fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+
| startUpCfg(3) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+
| addRunningCfg(15)| fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+-
sftp(10) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+
| runningCfg(2) | fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+
| startUpCfg(3) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+
| addRunningCfg(15)| fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+-rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.24.1.1 |
fileCopySrcFileNameThe source file name for fileCopyMgt when a copy
operation is next requested via this MIB. This value is set to
a zero length string when no file name has been specified.
Note: If the fileCopySrcOperType is runningCfg(2) or startUpCfg(3),
this variable can be ignored.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.24.1.2 |
fileCopyDestOperTypeSee the description for fileCopySrcOperType.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.24.1.3 |
fileCopyDestFileNameThe destination file name for fileCopyMgt when a
copy operation is next requested via this MIB. This value is set to
a zero length string when no file name has been specified.
Note: If the fileCopyDestOperType is runningCfg(2) or startupCfg(3),
this variable can be ignored.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.24.1.4 |
fileCopyFileTypeType of file to copy in fileCopyMgt. opcode(1) indicates operation
code, config(2) indicates configuration file, bootRom(3) indicates
diagnostic image file and loader(5) indicates loader image file. If
the fileCopySrcOperType or fileCopyDestOperType is either runningCfg(2)
or startupCfg(3), this variable can be ignored. bootRom(3) and
loader(5) can be set only when the fileCopySrcOperType is tftp(4) and
fileCopyDestOperType is file(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.24.1.5 |
fileCopyUnitIdSpecifies the switch unit for stackable devices.
When performing the 'copy unit file' or 'copy file unit' action,
if neither fileCopySrcOperType nor fileCopyDestOperType
is unit(5), this variable can be ignored.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.24.1.7 |
fileCopyActionSetting this object to copy(2) to begin the copy operation. When
the device is not copying, this object will have a value of
notCopying(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.24.1.8 |
fileCopyStatusThe status of the last copy procedure, if any. This
object will have a value of fileCopyUnknown(18) if no
copy operation has been performed. The listed values are
identical to fileAutoDownloadResultStatus.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.24.1.9 |
fileCopyServerInetAddressTypeInternet address type of the remote server. Only ipv4(1)
type is supported.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.24.1.20 |
fileCopyServerInetAddressInternet address of the remote server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.24.1.21 |
fileCopyServerUserNameLogin user name for the remote server. When this variable is
empty, the system will use 'anonymous' as user name to log in
to the remote server.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.24.1.22 |
fileCopyServerPasswordLogin password for the remote server. This variable can only
be written. When this variable is read, it always returns a
zero-length string.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.24.1.23 |
fileInfoMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.24.2 |
fileInfoTableThis table contain the information of the file system;
we can also perform the delete, set startup file operation. SEQUENCE OF FileInfoEntry .1.3.6.1.4.1.259.10.1.43.1.24.2.1 |
fileInfoEntryA conceptually row for fileInfoTable. FileInfoEntry .1.3.6.1.4.1.259.10.1.43.1.24.2.1.1 |
fileInfoUnitIDThe switch unit in a stacking system, in a
non-stacking system, this value is always 1. Integer32 .1.3.6.1.4.1.259.10.1.43.1.24.2.1.1.1 |
fileInfoFileNameThe file Name of the file System in the device. DisplayString .1.3.6.1.4.1.259.10.1.43.1.24.2.1.1.2 |
fileInfoFileTypeThe file type of the file System in the device.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.24.2.1.1.3 |
fileInfoIsStartUpThis flag indicate whether this file is a startup file. Set this
object to true(1) to indicate that this is a startup file. Setting this
object to false(2) is a invalid operation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.24.2.1.1.4 |
fileInfoFileSizeThe sizes( in bytes) of the file.ro Integer32 UNITS "bytes" .1.3.6.1.4.1.259.10.1.43.1.24.2.1.1.5 |
fileInfoCreationTimeThe creation time of the file, This is a text string in the
following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm'
are the first three letters of the English name of the month.
'_d' is the day of month. A single-digit day is preceded by
a space. 'hh:mm:ss' is a 24-hour representations of hours,
minutes, and seconds. A single-digit hour is preceded by a
zero. 'yyyy' is the four-digit year. An example is:
'Jan 1 02:03:04 2002'.ro DisplayString .1.3.6.1.4.1.259.10.1.43.1.24.2.1.1.6 |
fileInfoDeleteWrite this object to delete(2) to delete a file, when
read, this always return noDelete(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.24.2.1.1.7 |
fileAutoDownloadResultTableThis table contains file auto download result information. SEQUENCE OF FileAutoDownloadResultEntry .1.3.6.1.4.1.259.10.1.43.1.24.3 |
fileAutoDownloadResultEntryA conceptual row for fileAutoDownloadResultTable. FileAutoDownloadResultEntry .1.3.6.1.4.1.259.10.1.43.1.24.3.1 |
fileAutoDownloadResultUnitIDThe switch unit in a stacking system, in a
non-stacking system, this value is always 1. Integer32 .1.3.6.1.4.1.259.10.1.43.1.24.3.1.1 |
fileAutoDownloadResultActionThe status of the auto download action.
value copying(2) will be obtained if the auto download action is currently processing,
or value notCopying(1) will be obtained if no auto download action is currently processing.
You can check the download result through the fileAutoDownloadResultStatus object
after the download action has finished.
Please note that this object is read-only, since the auto download action is triggered
automatically by the system when an image file or a config file is set as startup setting
through the fileInfoIsStartUp, restartOpCodeFile or restartConfigFile objects,
but not set by the user manually through this fileAutoDownloadResultAction object.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.24.3.1.2 |
fileAutoDownloadResultStatusThe last auto download result status.
value fileCopyUnknown(18) will be obtained
if no download action has been performed before.
The listed values are identical to fileCopyStatus.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.24.3.1.3 |
poeMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.28 |
pethPseMainExtTableA table of objects that display and control attributes of the main
power source in a PSE device. Ethernet switches are one example of
boxes that would support these objects. Values of all read-write
objects in this table are persistent at restart/reboot. SEQUENCE OF PethPseMainExtEntry .1.3.6.1.4.1.259.10.1.43.1.28.5 |
pethPseMainExtEntryA set of objects that display and control the Main power of a PSE. PethPseMainExtEntry .1.3.6.1.4.1.259.10.1.43.1.28.5.1 |
pethPseMainExtDllPowerTypeIndicates whether the local system is a PSE or a PD
and whether it is Type 1 or Type 2.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.28.5.1.1 |
pethPseMainExtDllPowerSourceThe power sources of the local system.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.28.5.1.2 |
pethPsePortExtTableA table of objects that display and control the power characteristics
of power Ethernet ports on a Power Source Entity (PSE) device.
This group will be implemented in managed power Ethernet switches and
mid-span devices. Values of all read-write objects in this table are
persistent at restart/reboot. SEQUENCE OF PethPsePortExtEntry .1.3.6.1.4.1.259.10.1.43.1.28.6 |
pethPsePortExtEntryA set of objects that display and control the power characteristics of
a power Ethernet PSE port. PethPsePortExtEntry .1.3.6.1.4.1.259.10.1.43.1.28.6.1 |
pethPsePortExtMirroredDllPdRequestedPowerValueReturns the PD requested power value received from the remote system.
The definition and encoding of PD requested power value is the same as
described in pethPdPortDllPdRequestedPowerValue.ro INTEGER .1.3.6.1.4.1.259.10.1.43.1.28.6.1.4 |
pethPsePortExtDllPseAllocatedPowerValueReturns the PSE allocated power value that the local system has
currently allocated to the remote system. The PSE allocated power value
is the maximum input average power that the PSE wants the PD to ever
draw under this allocation if it is accepted. The PSE allocated power
value is encoded according to Equation (33-20), where X is the decimal
value of pethPsePortExtDllPseAllocatedPowerValue.ro INTEGER .1.3.6.1.4.1.259.10.1.43.1.28.6.1.6 |
pethPsePortTimeRangeThe name of the time range entry bound to the port.
This object should be equal to one of the timeRangeName
objects in timeRangeTable. The object works when
pethPsePortAdminEnable is enabled(1).rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.28.6.1.11 |
pethPsePortTimeRangeStatusIf no time range entry is bound to the port, value of this
object is none(0). If PoE time range of the port is active,
value of this object is active(1). If PoE time range of
the port is inactive, value of this object is inactive(2).ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.28.6.1.12 |
pethPsePortExtMaximumPowerValueReturns the user-configurable maximum power value that
the local system has currently allocated to the remote system.
The units of this variable is milliwatts.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.28.6.1.13 |
pethPsePortExtUsedPowerValueReturns the currently used power value that
the local system is delivering to the remote system.
The units of this variable is milliwatts.ro INTEGER UNITS "milliwatts" .1.3.6.1.4.1.259.10.1.43.1.28.6.1.14 |
stormMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.33 |
mcastStormMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.33.1 |
mcastStormTableTable to manage the control of multicast storms for ports. SEQUENCE OF McastStormEntry .1.3.6.1.4.1.259.10.1.43.1.33.1.1 |
mcastStormEntryThe conceptual row of multiStormTable. McastStormEntry .1.3.6.1.4.1.259.10.1.43.1.33.1.1.1 |
mcastStormIfIndexThe port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.1.1.1.1 |
mcastStormStatusWhether multicast storm protection is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.1.1.1.2 |
mcastStormPktRateMulticast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port. The range is 500 to 1488100.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.33.1.1.1.4 |
mcastStormPktRateResolutionPresent the rate's resolution. Its unit is packets per
secondro Integer32 .1.3.6.1.4.1.259.10.1.43.1.33.1.1.1.8 |
bcastStormMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.33.3 |
bcastStormTableTable to manage the control of broadcast storms for ports. SEQUENCE OF BcastStormEntry .1.3.6.1.4.1.259.10.1.43.1.33.3.1 |
bcastStormEntryThe conceptual row of bcastStormTable. BcastStormEntry .1.3.6.1.4.1.259.10.1.43.1.33.3.1.1 |
bcastStormIfIndexThe port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.3.1.1.1 |
bcastStormStatusWhether broadcast storm protection is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.3.1.1.2 |
bcastStormPktRateBroadcast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port. The range is 500 to 1488100.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.33.3.1.1.4 |
bcastStormPktRateResolutionPresent the rate's resolution. Its unit is packets per
secondro Integer32 .1.3.6.1.4.1.259.10.1.43.1.33.3.1.1.8 |
unknownUcastStormMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.33.4 |
unknownUcastStormTableTable to manage the unknown unicast storm control. SEQUENCE OF UnknownUcastStormEntry .1.3.6.1.4.1.259.10.1.43.1.33.4.1 |
unknownUcastStormEntryThe conceptual row of unknownUcastStormTable. UnknownUcastStormEntry .1.3.6.1.4.1.259.10.1.43.1.33.4.1.1 |
unknownUcastStormIfIndexThe port or trunk interface of the portTable. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.4.1.1.1 |
unknownUcastStormStatusThe parameter indicates that the unknown unicast
storm protection is enabled/disabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.4.1.1.2 |
unknownUcastStormPktRateThe parameter indicates the packet rate(packet per second) of the storm protection.
The range is 500 to 1488100.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.33.4.1.1.4 |
unknownUcastStormPktRateResolutionPresent the rate's resolution. Its unit is packets per
secondro Integer32 .1.3.6.1.4.1.259.10.1.43.1.33.4.1.1.8 |
atcMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.33.5 |
atcBcastStormTcApplyTimeThe parameter indicates the timing when the ATC (Auto
Traffic Control) is activated after the broadcast traffic
being detected as the storm.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.33.5.1 |
atcBcastStormTcReleaseTimeThe parameter indicates the timing when the ATC is released
after the broadcast traffic being detected as no storm.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.33.5.2 |
atcBcastStormTableThe table contains the Auto Traffic Control configuration
and the status for broadcast traffic. SEQUENCE OF AtcBcastStormEntry .1.3.6.1.4.1.259.10.1.43.1.33.5.3 |
atcBcastStormEntryThe conceptual row of the table. AtcBcastStormEntry .1.3.6.1.4.1.259.10.1.43.1.33.5.3.1 |
atcBcastStormIfIndexThe specified port on which the ATC is applied.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.5.3.1.1 |
atcBcastStormEnableThe parameter indicates whether the ATC of the broadcast
traffic is applied.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.5.3.1.2 |
atcBcastStormAutoReleaseThe parameter indicates whether the Auto-Release feature
of ATC is applied.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.5.3.1.3 |
atcBcastStormSampleTypeThe parameter indicates the unit of traffic rate and threshold.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.33.5.3.1.4 |
atcBcastStormCurrentTrafficRateThe parameter indicates the current broadcast traffic rate.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.33.5.3.1.5 |
atcBcastStormAlarmFireThresholdThe parameter indicates that if the current broadcast traffic rate
exceeds the specified threshold, it will be treated as the storm.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.33.5.3.1.6 |
atcBcastStormAlarmClearThresholdThe parameter indicates that if the current broadcast traffic
falls below the specified threshold it will be treated as the
normal traffic.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.33.5.3.1.7 |
atcBcastStormTcActionThe parameter indicates the protecting action which
ATC will applied to the specified port.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.33.5.3.1.8 |
atcBcastStormAlarmFireTrapStatusThe parameter indicates whether the trap has
to be sent when the broadcast storm has been detected.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.5.3.1.9 |
atcBcastStormAlarmClearTrapStatusThe parameter indicates whether the trap has
to be sent when the broadcast storm has been detected as
the normal traffic.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.5.3.1.10 |
atcBcastStormTcApplyTrapStatusThe parameter indicates whether the trap has to be sent when
the ATC is activated.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.5.3.1.11 |
atcBcastStormTcReleaseTrapStatusThe parameter indicates whether the trap has to be sent when
the ATC is released.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.5.3.1.12 |
atcMcastStormTcApplyTimeThe parameter indicates the timing when the ATC (Auto
Traffic Control) is activated after the broadcast traffic
being detected as the storm.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.33.5.4 |
atcMcastStormTcReleaseTimeThe parameter indicates the timing when the ATC is released
after the broadcast traffic being detected as no storm.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.33.5.5 |
atcMcastStormTableThe table contains the Auto Traffic Control configuration
and the status for mulicast traffic. SEQUENCE OF AtcMcastStormEntry .1.3.6.1.4.1.259.10.1.43.1.33.5.6 |
atcMcastStormEntryThe conceptual row of the table. AtcMcastStormEntry .1.3.6.1.4.1.259.10.1.43.1.33.5.6.1 |
atcMcastStormIfIndexThe specified port on which the ATC is applied.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.5.6.1.1 |
atcMcastStormEnableThe parameter indicates whether the ATC of the mulicast
traffic is applied.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.5.6.1.2 |
atcMcastStormAutoReleaseThe parameter indicates whether the Auto-Release feature
of ATC is applied.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.5.6.1.3 |
atcMcastStormSampleTypeThe parameter indicates the unit of traffic rate and threshold.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.33.5.6.1.4 |
atcMcastStormCurrentTrafficRateThe parameter indicates the current mulicast traffic rate.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.33.5.6.1.5 |
atcMcastStormAlarmFireThresholdThe parameter indicates that if the current mulicast traffic rate
exceeds the specified threshold, it will be treated as the storm.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.33.5.6.1.6 |
atcMcastStormAlarmClearThresholdThe parameter indicates that if the current mulicast traffic
falls below the specified threshold it will be treated as the
normal traffic.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.33.5.6.1.7 |
atcMcastStormTcActionThe parameter indicates the protecting action which
ATC will applied to the specified port.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.33.5.6.1.8 |
atcMcastStormAlarmFireTrapStatusThe parameter indicates whether the trap has
to be sent when the mulicast storm has been detected.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.5.6.1.9 |
atcMcastStormAlarmClearTrapStatusThe parameter indicates whether the trap has
to be sent when the mulicast storm has been detected as
the normal traffic.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.5.6.1.10 |
atcMcastStormTcApplyTrapStatusThe parameter indicates whether the trap has to be sent when
the ATC is activated.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.5.6.1.11 |
atcMcastStormTcReleaseTrapStatusThe parameter indicates whether the trap has to be sent when
the ATC is released.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.33.5.6.1.12 |
sysResourceMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.39 |
cpuStatus OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.39.2 |
cpuCurrentUtiThe current CPU utilization in percent in the past 5 seconds.ro INTEGER .1.3.6.1.4.1.259.10.1.43.1.39.2.1 |
cpuStatMaxUtiThe maximum CPU utilization in percent in the past 60 seconds.ro INTEGER .1.3.6.1.4.1.259.10.1.43.1.39.2.2 |
cpuStatAvgUtiThe average CPU utilization in percent in the past 60 seconds.ro INTEGER .1.3.6.1.4.1.259.10.1.43.1.39.2.3 |
cpuPeakTimeThe time when the CPU utilization reaches cpuUtiRisingThreshold
in the format of 'Mmm _d hh:mm:ss yyyy' as defined
in sysCurrentTime of this MIB.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.39.2.4 |
cpuPeakDurationThe duration from the CPU utilization reaches cpuUtiRisingThreshold
to reaches cpuUtiFallingThreshold, in seconds.ro INTEGER UNITS "second" .1.3.6.1.4.1.259.10.1.43.1.39.2.5 |
cpuUtiRisingThresholdThe rising threshold of the cpu utilization.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.39.2.6 |
cpuUtiFallingThresholdThe falling threshold of the cpu utilization.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.39.2.7 |
memoryStatus OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.39.3 |
memoryTotalThe total amount of the memory in kilobytes.ro INTEGER .1.3.6.1.4.1.259.10.1.43.1.39.3.1 |
memoryAllocatedThe amount of the memory allocated in kilobytes.ro INTEGER .1.3.6.1.4.1.259.10.1.43.1.39.3.2 |
memoryFreedThe amount of the free memory in kilobytes.ro INTEGER .1.3.6.1.4.1.259.10.1.43.1.39.3.3 |
memoryFreedInPercentthe memory freed in proportion to the total memory.ro INTEGER .1.3.6.1.4.1.259.10.1.43.1.39.3.4 |
memoryUtiRisingThresholdThe rising threshold of the memory utilization.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.39.3.5 |
memoryUtiFallingThresholdThe falling threshold of the memory utilization.rw INTEGER .1.3.6.1.4.1.259.10.1.43.1.39.3.6 |
taskCpuTableTable of descriptive and status information describing the
CPU utilization of each task. SEQUENCE OF TaskCpuEntry .1.3.6.1.4.1.259.10.1.43.1.39.4 |
taskCpuEntryAn entry in the table, describing the CPU utilization of one
task. TaskCpuEntry .1.3.6.1.4.1.259.10.1.43.1.39.4.1 |
taskCpuNameThe name of the task. DisplayString .1.3.6.1.4.1.259.10.1.43.1.39.4.1.1 |
taskCpuCurrentUtiThe current CPU utilization in hundredths of a percent in the
past 5 seconds.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.39.4.1.2 |
taskCpuStatMaxUtiThe maximum CPU utilization in hundredths of a percent in the
past 60 seconds.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.39.4.1.3 |
taskCpuStatAvgUtiThe average CPU utilization in hundredths of a percent in the
past 60 seconds.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.39.4.1.4 |
cpuGuard OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.39.5 |
cpuGuardStatusThe CPU guard status.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.39.5.1 |
cpuGuardHighWatermarkThe CPU guard high-watermark.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.39.5.2 |
cpuGuardLowWatermarkThe CPU guard low-watermark.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.39.5.3 |
cpuGuardMaxThresholdThe CPU guard maximum threshold.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.39.5.4 |
cpuGuardMinThresholdThe CPU guard minimum threshold.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.39.5.5 |
cpuGuardTrapStatusThe CPU guard trap status.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.39.5.6 |
cpuGuardCurrentThresholdThe current CPU guard threshold.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.39.5.7 |
mvrMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.44 |
mvrForwardingPriorityConfigure MVR multicast stream forwarding priority.
If value is 65535, it means the priority is disabled.rw Integer32(0..7|65535) .1.3.6.1.4.1.259.10.1.43.1.44.18 |
mvrDomainTableThe table for configuring the MVR port. SEQUENCE OF MvrDomainEntry .1.3.6.1.4.1.259.10.1.43.1.44.20 |
mvrDomainEntryThe entry for configuring the MVR Domain. MvrDomainEntry .1.3.6.1.4.1.259.10.1.43.1.44.20.1 |
mvrDomainIdSpeicfies which MVR domain to configure. Integer32 .1.3.6.1.4.1.259.10.1.43.1.44.20.1.1 |
mvrDomainStatusParameter to enable or disable MVR(Multicast VLAN
Registration) on the device.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.44.20.1.2 |
mvrDomainRunningStatusDescribes the running status of MVR (Multicast VLAN Registration)
to the switch. A value of active(1) indicates that all necessary
conditions in the MVR environment are satisfied. A value of inactive(2)
indicates that some necessary conditions in the MVR environment are
not satisfied.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.44.20.1.3 |
mvrDomainVlanIdTo set VLAN for MVR.The VLAN identified by a particular
value of this index is the same VLAN as identified by the
same value of dot1qVlanIndex in the Q-BRIDGE-MIB.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.44.20.1.4 |
mvrDomainUpstreamSourceIpSet the source IP address which MVR will carry in IP header when send IGMP packet to upstream router
through MVR source port.rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.44.20.1.5 |
mvrDomainClearDynamicGroupsClear dynamic learned groupsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.44.20.1.6 |
mvrDomainPortTableThe table for configuring the MVR port. SEQUENCE OF MvrDomainPortEntry .1.3.6.1.4.1.259.10.1.43.1.44.21 |
mvrDomainPortEntryThe entry for configuring the MVR port. MvrDomainPortEntry .1.3.6.1.4.1.259.10.1.43.1.44.21.1 |
mvrPortDomainIdSpeicfies which MVR domain to configure. Integer32 .1.3.6.1.4.1.259.10.1.43.1.44.21.1.1 |
mvrDomainIfIndexThe port interface of the portTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of ifIndex
in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.44.21.1.2 |
mvrDomainPortTypeFor configuring the MVR port type. To disable the MVR
port type, use the none(0).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.44.21.1.3 |
mvrDomainPortImmediateLeaveTo enable immediate leave on MVR port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.44.21.1.4 |
mvrDomainPortActiveTo indicate if the port is associated with the MVR group.
If the port is the MVR receiver port or the MVR source
port in MVR vlan, the status is active(1); otherwise
the status is inactive(2).ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.44.21.1.5 |
mvrDomainPortImmediateLeaveByHostIpTo enable immediate leave by host IP on MVR port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.44.21.1.6 |
mvrProfileTable OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.44.22 |
mvrProfileCtlTableThe entry for configuring the MVR profile. SEQUENCE OF MvrProfileCtlEntry .1.3.6.1.4.1.259.10.1.43.1.44.22.1 |
mvrProfileCtlEntryThe entry for configuring the MVR profile. MvrProfileCtlEntry .1.3.6.1.4.1.259.10.1.43.1.44.22.1.1 |
mvrProfileCtlIdProfile ID to index which MVR profile Integer32 .1.3.6.1.4.1.259.10.1.43.1.44.22.1.1.1 |
mvrProfileNameMVR Profile name which identify a group range.
NOTE: All mvrProfileCtlEntry use the same buffer to temply store the mvrProfileName before
mvrProfileCtlAction really creat the profile.rw OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.44.22.1.1.2 |
mvrProfileCtlActionSet this object to create(2) to create profile. Set this object
to destory(3) to delete profile. When
the action is complete, this object becomes noAction(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.44.22.1.1.5 |
mvrProfileGroupCtlTableThe entry for configuring the MVR group ranges for MVR profile. SEQUENCE OF MvrProfileGroupCtlEntry .1.3.6.1.4.1.259.10.1.43.1.44.22.2 |
mvrProfileGroupCtlEntryThe entry for configuring the group ranges on MVR profile. MvrProfileGroupCtlEntry .1.3.6.1.4.1.259.10.1.43.1.44.22.2.1 |
mvrProfileGropuCtlProfileIdProfile ID to index which MVR profile Integer32 .1.3.6.1.4.1.259.10.1.43.1.44.22.2.1.1 |
mvrProfileGroupCtlIdProfile ID to index which group range in MVR profile Integer32 .1.3.6.1.4.1.259.10.1.43.1.44.22.2.1.2 |
mvrProfileGroupStartIPAddressMVR Profile range start IP address.
NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileStartIPAddress before
mvrProfileGroupCtlAction really creat the group rang on profile.rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.44.22.2.1.3 |
mvrProfileGroupEndIPAddressMVR Profile range end IP address.
NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileEndIPAddress before
mvrProfileGroupCtlAction really creat the group rang on profile.rw IpAddress .1.3.6.1.4.1.259.10.1.43.1.44.22.2.1.4 |
mvrProfileGroupCtlActionSet this object to create(2) to create group range. Set this object
to destory(3) to delete group range. When
the action is complete, this object becomes noAction(1).
NOTE: If mvrProfileGroupStartIPAddress and mvrProfileGroupEndIPAddress
pattern already exist on other mvrProfileGroupCtlId, it won't be stored.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.44.22.2.1.5 |
mvrDomainAssociatedProfileTableConfigure MVR domain associate which MVR profile SEQUENCE OF MvrDomainAssociatedProfileEntry .1.3.6.1.4.1.259.10.1.43.1.44.23 |
mvrDomainAssociatedProfileEntryThe entry for configuring MVR domain associate MVR profile. MvrDomainAssociatedProfileEntry .1.3.6.1.4.1.259.10.1.43.1.44.23.1 |
mvrProfileDomainIdProfile ID to index which MVR profile Integer32 .1.3.6.1.4.1.259.10.1.43.1.44.23.1.1 |
mvrProfileIdProfile ID to index which MVR profile Integer32 .1.3.6.1.4.1.259.10.1.43.1.44.23.1.2 |
mvrProfileActionSet this object to create(1) to associate profile. Set this object
to destory(2) to deassociate profile. When
the action is complete, this object becomes noAction(0).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.44.23.1.3 |
mvrDomainGroupStaticTableThe table for configuring the static members of the
MVR group. SEQUENCE OF MvrDomainGroupStaticEntry .1.3.6.1.4.1.259.10.1.43.1.44.24 |
mvrDomainGroupStaticEntryThe entry for configuring the static members of the
MVR group. MvrDomainGroupStaticEntry .1.3.6.1.4.1.259.10.1.43.1.44.24.1 |
mvrGroupStaticDomainIdProfile ID to index which MVR profile Integer32 .1.3.6.1.4.1.259.10.1.43.1.44.24.1.1 |
mvrDomainGroupStaticAddressThe multicast address of the MVR group. IpAddress .1.3.6.1.4.1.259.10.1.43.1.44.24.1.2 |
mvrDomainGroupStaticReceiverVlanThe receiver vlan of this MVR group Integer32 .1.3.6.1.4.1.259.10.1.43.1.44.24.1.3 |
mvrDomainGroupStaticPortsThe set of ports configured by management in this entry.
Ports entered in this list will be the static members
of this MVR group.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.44.24.1.4 |
mvrDomainGroupCurrentTableThe table for the current members of the MVR group. SEQUENCE OF MvrDomainGroupCurrentEntry .1.3.6.1.4.1.259.10.1.43.1.44.25 |
mvrDomainGroupCurrentEntryThe entry for the current members of the MVR group. MvrDomainGroupCurrentEntry .1.3.6.1.4.1.259.10.1.43.1.44.25.1 |
mvrGroupCurrenDomainIdProfile ID to index which MVR profile Integer32 .1.3.6.1.4.1.259.10.1.43.1.44.25.1.1 |
mvrDomainGroupCurrentAddressThe multicast address of the MVR group. IpAddress .1.3.6.1.4.1.259.10.1.43.1.44.25.1.2 |
mvrDomainGroupCurrentReceiverVlanThis object indicates the receiver VLAN of the MVR group. Integer32 .1.3.6.1.4.1.259.10.1.43.1.44.25.1.3 |
mvrDomainGroupCurrentPortsThe complete set of ports currently associated with this
MVR group.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.44.25.1.4 |
mvrProxySwitchingParameter to enable or disable MVR(Multicast VLAN
Registration) proxy switching ability on the device.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.44.27 |
mvrRobustnessValueParemete to set IGMP robustness value.
This value apply to proxy-switching for how many IGMP report/leave will be send out from source port,
and how many g-s query will be send on receiver port.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.44.28 |
mvrProxyQueryIntervalSet the query interval that active receiver port will use to send out general queryrw Integer32 .1.3.6.1.4.1.259.10.1.43.1.44.29 |
mvrSourcePortmodeParemete to set MVR Source Port forward mode.
When set dynamic, MVR source port won't forward multicast streams received from other source port.
When set forward, MVR source port will forward multicast streams received from other source port.
These multicast stream all are in MVR group range.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.44.30 |
mvrPortStatisticsTableTable of service per port. SEQUENCE OF MvrPortStatisticsEntry .1.3.6.1.4.1.259.10.1.43.1.44.32 |
mvrPortStatisticsEntryEntry of service per port. MvrPortStatisticsEntry .1.3.6.1.4.1.259.10.1.43.1.44.32.1 |
mvrPortStatisticsDomainIdMVR domain ID. Integer32 .1.3.6.1.4.1.259.10.1.43.1.44.32.1.1 |
mvrPortStatisticsPortIndexThe port and the trunk (excluding trunk members)
interface of the mvrPortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the IF-MIB. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.44.32.1.2 |
mvrPortStatisticsNumGroupsCurrent learned groupsro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.32.1.3 |
mvrPortStatisticsNumJoinSendNumber of join sendro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.32.1.4 |
mvrPortStatisticsNumJoinsNumber of join recievedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.32.1.5 |
mvrPortStatisticsNumJoinSuccessNumber of join group successro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.32.1.6 |
mvrPortStatisticsNumLeavesSendNumber of leave sendro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.32.1.7 |
mvrPortStatisticsNumLeavesNumber of leave receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.32.1.8 |
mvrPortStatisticsNumGeneralQuerySendNumber of general query send.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.32.1.9 |
mvrPortStatisticsNumGeneralQueryReceviedNumber of general query received.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.32.1.10 |
mvrPortStatisticsNumSepcificQuerySendNumber of specific query send.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.32.1.11 |
mvrPortStatisticsNumSpecificQueryReceivedNumber of specific query received.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.32.1.12 |
mvrPortStatisticsNumInvalidReportNumber of invalid report received.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.32.1.13 |
mvrPortStatisticsClearStatisticsClear this VLAN all statisticsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.44.32.1.14 |
mvrVlanStatisticsTableTable of Mvr statistics VLAN. SEQUENCE OF MvrVlanStatisticsEntry .1.3.6.1.4.1.259.10.1.43.1.44.33 |
mvrVlanStatisticsEntryEntry of Mvr statistics VLAN. MvrVlanStatisticsEntry .1.3.6.1.4.1.259.10.1.43.1.44.33.1 |
mvrVlanStatisticsDomainIdVLAN ID Integer32 .1.3.6.1.4.1.259.10.1.43.1.44.33.1.1 |
mvrVlanStatisticsVlanIdVLAN ID VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.44.33.1.2 |
mvrVlanStatisticsNumGroupsCurrent learned groupsro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.33.1.3 |
mvrVlanStatisticsNumJoinSendNumber of join send.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.33.1.4 |
mvrVlanStatisticsNumJoinsNumber of join receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.33.1.5 |
mvrVlanStatisticsNumJoinSuccessNumber of jion successro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.33.1.6 |
mvrVlanStatisticsNumLeavesSendNumber of leave send.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.33.1.7 |
mvrVlanStatisticsNumLeavesNumber of leave receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.33.1.8 |
mvrVlanStatisticsNumGeneralQuerySendNumber of general query sendro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.33.1.9 |
mvrVlanStatisticsNumGeneralQueryReceviedNumber of general query receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.33.1.10 |
mvrVlanStatisticsNumSepcificQuerySendNumber of specific query sendro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.33.1.11 |
mvrVlanStatisticsNumSpecificQueryReceivedNumber of sepcific query receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.33.1.12 |
mvrVlanStatisticsNumInvalidReportNumber of invalid report receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.44.33.1.13 |
mvrVlanStatisticsClearStatisticsClear this VLAN statisticsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.44.33.1.14 |
dhcpSnoopMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.46 |
dhcpSnoopGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.46.1 |
dhcpSnoopEnableThis object indicates whether the DHCP Snooping feature is
enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.46.1.1 |
dhcpSnoopVerifyMacAddressEnableThis object indicates whether DHCP Snooping Mac address
verification is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.46.1.2 |
dhcpSnoopInformationOptionEnableThis object indicates whether the DHCP snooping information option(option 82) feature is
enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.46.1.3 |
dhcpSnoopInformationOptionPolicyThis object indicates which reforwarding policy shall be used for DHCP
snooping information option(option 82). A value of drop(1) means to drop
the DHCP request packet which has the information option(option 82).
A value of keep(2) means to keep the existing information option(option 82)
of the DHCP request packet. A value of replace(3), which is the default value,
means to replace the existing information option(option 82) of the DHCP
request packet.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.46.1.4 |
dhcpSnoopBindingsTableCtlActionSet this to store(2) to store DHCP snooping binding entries to flash.
Set this to clear(3) to clear DHCP snooping binding entries from flash.
noAction(1) will always be obtained when reading this variable.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.46.1.5 |
dhcpSnoopLimitRateThis object indicates the limit rate that DHCP packet redirected to CPU.
Set this to 0 means no rate limit for DHCP packet.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.46.1.6 |
dhcpSnoopInformationOptionEncodeFormatSet encode format for CID and RID in option82.
Set extra-subtype-included(1) will have extra subtype and length field in CID and RID.
Set no-extra-subtype-included(2) will only have TLV format for CID and RID.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.46.1.7 |
dhcpSnoopVlan OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.46.2 |
dhcpSnoopVlanConfigTableA table contains DHCP Snooping configurations of existing VLANs. SEQUENCE OF DhcpSnoopVlanConfigEntry .1.3.6.1.4.1.259.10.1.43.1.46.2.1 |
dhcpSnoopVlanConfigEntryAn instance contains the configuration to enable
or disable DHCP Snooping at each existing VLAN. DhcpSnoopVlanConfigEntry .1.3.6.1.4.1.259.10.1.43.1.46.2.1.1 |
dhcpSnoopVlanIndexThis object indicates the VLAN ID on which DHCP Snooping
feature is configured. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.46.2.1.1.1 |
dhcpSnoopVlanEnableThis object indicates whether DHCP Snooping is enabled in
this VLAN.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.46.2.1.1.2 |
dhcpSnoopInterface OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.46.3 |
dhcpSnoopPortConfigTableA table provides the mechanism to configure the trust
state of each port or trunk for DHCP Snooping purpose. SEQUENCE OF DhcpSnoopPortConfigEntry .1.3.6.1.4.1.259.10.1.43.1.46.3.1 |
dhcpSnoopPortConfigEntryAn instance contains the configuration to enable or disable
trust state of each port or trunk for DHCP Snooping purpose. DhcpSnoopPortConfigEntry .1.3.6.1.4.1.259.10.1.43.1.46.3.1.1 |
dhcpSnoopPortIfIndexThe ifIndex value of the port or trunk. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.46.3.1.1.1 |
dhcpSnoopPortTrustEnableThis object indicates whether the port or trunk is trusted
for DHCP Snooping purpose.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.46.3.1.1.2 |
dhcpSnoopPortMaxNumberThis object indicates the max client number of per port.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.46.3.1.1.6 |
dhcpSnoopBindings OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.46.4 |
dhcpSnoopBindingsTableA table contains the DHCP bindings information learnt by
the device. SEQUENCE OF DhcpSnoopBindingsEntry .1.3.6.1.4.1.259.10.1.43.1.46.4.1 |
dhcpSnoopBindingsEntryAn instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status. DhcpSnoopBindingsEntry .1.3.6.1.4.1.259.10.1.43.1.46.4.1.1 |
dhcpSnoopBindingsVlanIndexThis object indicates the VLAN which a DHCP client host
belongs to.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.46.4.1.1.1 |
dhcpSnoopBindingsMacAddressThis object indicates the MAC address of a DHCP client
host. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.46.4.1.1.2 |
dhcpSnoopBindingsAddrTypeThis object indicates the type of IP address denoted in
dhcpSnoopBindingsIpAddress type.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.46.4.1.1.3 |
dhcpSnoopBindingsEntryTypeThis object indicates that this binding is obtained from
dynamically learning or is a static configuraion.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.46.4.1.1.4 |
dhcpSnoopBindingsIpAddressThis object indicates the allocated IP address of
a DHCP client host. IpAddress .1.3.6.1.4.1.259.10.1.43.1.46.4.1.1.5 |
dhcpSnoopBindingsPortIfIndexThis object indicates the port or trunk where a DHCP client
host connects to.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.46.4.1.1.6 |
dhcpSnoopBindingsLeaseTimeThis object indicates the leased time of this DHCP
bindings.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.46.4.1.1.7 |
dhcpSnoopStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.46.5 |
dhcpSnoopTotalForwardedPktsIndicates the total number of packets subjected to
DHCP Snooping is forwarded.ro Counter32 .1.3.6.1.4.1.259.10.1.43.1.46.5.1 |
dhcpSnoopUntrustedPortDroppedPktsIndicates the number of packets subjected to DHCP Snooping
is dropped because they come from untrusted interface.ro Counter32 .1.3.6.1.4.1.259.10.1.43.1.46.5.3 |
ipSrcGuardMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.48 |
ipSrcGuardConfigTableA table contains the configurations to enable or disable
IP Source Guard at each port or trunk. SEQUENCE OF IpSrcGuardConfigEntry .1.3.6.1.4.1.259.10.1.43.1.48.1 |
ipSrcGuardConfigEntryAn instance contains the configuration to enable
or disable IP Source Guard at each port or trunk. IpSrcGuardConfigEntry .1.3.6.1.4.1.259.10.1.43.1.48.1.1 |
ipSrcGuardPortIfIndexThis object idents the port or trunk which is capable of
IP Source Guard feature. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.48.1.1.1 |
ipSrcGuardModeThis object indicates whether Ip Source Guard is enabled
at this interface. If the value equals 0, it means Ip Source
Guard is disabled. If the value equals 1, it means Ip Source
Guard is enabled, and packets are filtered by checking source ip.
If the value equals 2, it means Ip Source Guard is enabled
and packets are filtered by checking source ip and source mac.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.48.1.1.2 |
ipSrcGuardAclTableA table contains the IP Source Guard ACL binding information
learned by the device or configured by the user. SEQUENCE OF IpSrcGuardAclEntry .1.3.6.1.4.1.259.10.1.43.1.48.3 |
ipSrcGuardAclEntryAn instance contains the IP address, Mac address, entry type,
VLAN number, interface number and status. IpSrcGuardAclEntry .1.3.6.1.4.1.259.10.1.43.1.48.3.1 |
ipSrcGuardAclBindingIpAddressThis object indicates the IP address of a ACL binding entry. IpAddress .1.3.6.1.4.1.259.10.1.43.1.48.3.1.1 |
ipSrcGuardAclBindingMacAddressThis object indicates the MAC address of a ACL binding entry. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.48.3.1.2 |
ipSrcGuardAclBindingEntryTypeThis object indicates that this binding is obtained from
dynamically learning or is a static configuraion. Enumeration .1.3.6.1.4.1.259.10.1.43.1.48.3.1.3 |
ipSrcGuardAclBindingVlanIndexThis object indicates the VLAN which a ACL binding belongs to.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.48.3.1.4 |
ipSrcGuardAclBindingPortIfIndexThis object indicates the port or trunk where a ACL binding associated.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.48.3.1.5 |
ipSrcGuardAclBindingStatusThe status of this conceptual row entry. This object issued to
manage the creation and deletion of conceptual rows.
The status column has six defined values: - 'active', which
indicates that the conceptual row is available for use by the
managed device; - 'notInService', which indicates that the
conceptual row exists in the agent, but is unavailable for use
by the managed device.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.48.3.1.6 |
mldSnoopMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.54 |
mldSnoopStatusParameter to enable or disable MLD snooping on the device.
When enabled, the device will examine MLD packets and set
up filters for MLD ports.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.1 |
mldSnoopQuerierEnables (disables) whether the switch acts as an MLD
querier.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.2 |
mldSnoopRobustnessThe Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. MLD is
robust to (Robustness Variable-1) packet losses. The
discussion of the Robustness Variable is in Section 7.1
of RFC 2710.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.54.3 |
mldSnoopQueryIntervalThe interval (in seconds) between MLD host-query
messages sent by the switch.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.54.4 |
mldSnoopQueryMaxResponseTimeThe time after a query, during which a response is
expected from an endstation. If a querier has sent
a number of queries defined by mldSnoopRobustness,
but an endstation has not responded, a countdown
timer is started using an initial value set by
mldSnoopQueryMaxResponseTime. If the countdown
finishes, and the endstation still has not responded,
then that the endstation is deemed to have
left the multicast group.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.54.5 |
mldSnoopRouterPortExpireTimeSets the time (in seconds) the switch waits after
the previous querier has stopped querying before
the router port (which received query packets from
previous querier) expires.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.54.6 |
mldSnoopVersionMLD version snoopedrw Integer32 .1.3.6.1.4.1.259.10.1.43.1.54.7 |
mldSnoopUnknownMcastModeSets the mldSnoopUnknownMcastMode to define the flooding
behavior when receive the unknown multicast traffic.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.54.8 |
mldSnoopRouterCurrentTableTable for current router ports. SEQUENCE OF MldSnoopRouterCurrentEntry .1.3.6.1.4.1.259.10.1.43.1.54.9 |
mldSnoopRouterCurrentEntryEntry for current router ports. MldSnoopRouterCurrentEntry .1.3.6.1.4.1.259.10.1.43.1.54.9.1 |
mldSnoopRouterCurrentVlanIndexThe interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
mldSnoopRouterStaticTable. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.9.1.1 |
mldSnoopRouterCurrentPortsThe set of ports which are current router ports,
including static router ports. Please refer to
mldSnoopRouterStaticTable.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.9.1.2 |
mldSnoopRouterStaticTableTable for static router ports. SEQUENCE OF MldSnoopRouterStaticEntry .1.3.6.1.4.1.259.10.1.43.1.54.10 |
mldSnoopRouterStaticEntryEntry for static router ports. MldSnoopRouterStaticEntry .1.3.6.1.4.1.259.10.1.43.1.54.10.1 |
mldSnoopRouterStaticVlanIndexThe interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
mldSnoopRouterStaticTable. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.10.1.1 |
mldSnoopRouterStaticPortsThe set of ports which are static router ports.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.10.1.2 |
mldSnoopRouterStaticStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.54.10.1.3 |
mldSnoopMulticastCurrentTableTable for current multicast addresses. SEQUENCE OF MldSnoopMulticastCurrentEntry .1.3.6.1.4.1.259.10.1.43.1.54.11 |
mldSnoopMulticastCurrentEntryEntry for current multicast addresses. MldSnoopMulticastCurrentEntry .1.3.6.1.4.1.259.10.1.43.1.54.11.1 |
mldSnoopMulticastCurrentVlanIndexThe interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
mldSnoopMulticastStaticTable. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.11.1.1 |
mldSnoopMulticastCurrentIpAddressIPv6 address of multicast group. InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.11.1.2 |
mldSnoopMulticastCurrentSourceIpAddressIPv6 address of the source. InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.11.1.3 |
mldSnoopMulticastCurrentPortsThe set of ports which are members of a multicast group,
including static members. Please refer to
mldSnoopMulticastStaticTable.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.11.1.4 |
mldSnoopMulticastStaticTableTable for static multicast addresses. SEQUENCE OF MldSnoopMulticastStaticEntry .1.3.6.1.4.1.259.10.1.43.1.54.12 |
mldSnoopMulticastStaticEntryEntry for static multicast addresses. MldSnoopMulticastStaticEntry .1.3.6.1.4.1.259.10.1.43.1.54.12.1 |
mldSnoopMulticastStaticVlanIndexThe interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
mldSnoopMulticastStaticTable. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.12.1.1 |
mldSnoopMulticastStaticIpAddressIPv6 address of multicast group. InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.12.1.2 |
mldSnoopMulticastStaticPortsThe set of ports which are members.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.12.1.3 |
mldSnoopMulticastStaticStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.54.12.1.4 |
mldSnoopCurrentVlanTableTable for configuring MLD snooping for each VLAN
which exists in the device by (local or network)
management, or dynamically created as a result of
GVRP requests received. SEQUENCE OF MldSnoopCurrentVlanEntry .1.3.6.1.4.1.259.10.1.43.1.54.13 |
mldSnoopCurrentVlanEntryEntry for configuring MLD snooping. MldSnoopCurrentVlanEntry .1.3.6.1.4.1.259.10.1.43.1.54.13.1 |
mldSnoopCurrentVlanIndexSame is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.13.1.1 |
mldSnoopCurrentVlanImmediateLeaveThe parameter to enable or disable the
Immediate-Leave feature on this VLAN.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.13.1.2 |
mldSnoopCurrentVlanImmediateLeaveByHostIpThe parameter to enable or disable the
Immediate-Leave by-host-ip feature on this VLAN.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.13.1.3 |
mldSnoopProxyReportingParameter to enable or disable MLD snooping proxy reporting
on the device.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.14 |
mldSnoopUnsolicitedReportIntervalSetting this value to specify how long (in seconds) the
uplink ports should transmit unsolicited reports.rw Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.15 |
mldSnoopPortTableTable of MLD Snooping service per port. SEQUENCE OF MldSnoopPortEntry .1.3.6.1.4.1.259.10.1.43.1.54.16 |
mldSnoopPortEntryEntry of MLD Snooping service per port. MldSnoopPortEntry .1.3.6.1.4.1.259.10.1.43.1.54.16.1 |
mldSnoopPortIndexThe port and the trunk (excluding trunk members)
interface of the mldsnpPortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the IF-MIB. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.16.1.1 |
mldSnoopQueryDropParameter to enable or disable dropping MLD Query packet.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.54.16.1.3 |
mldSnoopMulticastDataDropParameter to enable or disable dropping IPv6 multicast datarw Enumeration .1.3.6.1.4.1.259.10.1.43.1.54.16.1.4 |
mldSnoopPortNumGroupsCurrent learned groupsro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.16.1.5 |
mldSnoopPortNumJoinSendNumber of join sendro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.16.1.6 |
mldSnoopPortNumJoinsNumber of join recievedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.16.1.7 |
mldSnoopPortNumJoinSuccessNumber of join group successro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.16.1.8 |
mldSnoopPortNumLeavesSendNumber of leave sendro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.16.1.9 |
mldSnoopPortNumLeavesNumber of leave receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.16.1.10 |
mldSnoopPortNumGeneralQuerySendNumber of general query send.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.16.1.11 |
mldSnoopPortNumGeneralQueryReceviedNumber of general query received.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.16.1.12 |
mldSnoopPortNumSepcificQuerySendNumber of specific query send.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.16.1.13 |
mldsnoopPortNumSpecificQueryReceivedNumber of specific query received.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.16.1.14 |
mldSnoopPortNumInvalidReportNumber of invalid report received.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.16.1.15 |
mldSnoopPortClearStatisticsClear this VLAN all statisticsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.54.16.1.16 |
mldSnoopFilterStatusParameter to enable or disable MLD filtering on the device.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.17 |
mldSnoopProfileTableThe table for configuring the MLD snooping profile. SEQUENCE OF MldSnoopProfileEntry .1.3.6.1.4.1.259.10.1.43.1.54.18 |
mldSnoopProfileEntryThe entry for configuring the MLD snooping profile. MldSnoopProfileEntry .1.3.6.1.4.1.259.10.1.43.1.54.18.1 |
mldSnoopProfileIdThe ID of the MLD snooping profile. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.18.1.1 |
mldSnoopProfileActionThe access mode of the MLD snooping profile.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.54.18.1.2 |
mldSnoopProfileStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.54.18.1.3 |
mldSnoopProfileCtl OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.54.19 |
mldSnoopProfileCtlIdThe ID of the MLD snooping profile. The default value
is zero, meaning that no ID is specified. In order to
create a profile, a non-zero value must be specified.rw Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.19.1 |
mldSnoopProfileCtlInetAddressTypeThe address type is associated with this agent.
Only ipv4(1) type is supported.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.19.2 |
mldSnoopProfileCtlStartInetAddressThe specified addresses in the start of the controlled
IP multicast addresses.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.19.3 |
mldSnoopProfileCtlEndInetAddressThe specified addresses in the end of the controlled
IP multicast addresses.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.19.4 |
mldSnoopProfileCtlActionSetting it to create(2) creates the range of the
controlled IP multicast addresses.
Setting it to destroy(3) destroys the range of the
controlled IP multicast addresses.
When the action is completed, this object becomes
noAction(1).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.54.19.5 |
mldSnoopProfileRangeTableThe table for configuring the range of the MLD snooping
profile. SEQUENCE OF MldSnoopProfileRangeEntry .1.3.6.1.4.1.259.10.1.43.1.54.20 |
mldSnoopProfileRangeEntryThe entry for configuring the range of the MLD snooping
profile. MldSnoopProfileRangeEntry .1.3.6.1.4.1.259.10.1.43.1.54.20.1 |
mldSnoopProfileRangeProfileIdThis is defined as mldSnoopProfileId. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.20.1.1 |
mldSnoopProfileRangeInetAddressTypeThe address type is associated with this agent.
Only ipv6(2) type is supported. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.20.1.2 |
mldSnoopProfileRangeStartInetAddressThe specified addresses in the start of the controlled
IPv6 multicast addresses. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.20.1.3 |
mldSnoopProfileRangeEndInetAddressThe specified addresses in the end of the controlled
IPv6 multicast addresses. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.20.1.4 |
mldSnoopProfileRangeActionThe access mode of the MLD snooping profile.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.54.20.1.5 |
mldSnoopFilterPortTableTable for port configuration in MLD filtering. SEQUENCE OF MldSnoopFilterPortEntry .1.3.6.1.4.1.259.10.1.43.1.54.21 |
mldSnoopFilterPortEntryEntry for port configuration in MLD filtering. MldSnoopFilterPortEntry .1.3.6.1.4.1.259.10.1.43.1.54.21.1 |
mldSnoopFilterPortIndexThe port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.21.1.1 |
mldSnoopFilterPortProfileIdThe mldSnoopProfileEntry identified by a particular value of this index
is the same interface identified by the same value of the mldSnoopProfileId
object. If there is no corresponding entry in the mldSnoopProfileTable,
then no association exists. In particular, if this value is zero, no
associated profile will be generated, as zero is not a valid profile index.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.54.21.1.2 |
mldSnoopThrottlePortTableTable for port configuration in MLD throttling. SEQUENCE OF MldSnoopThrottlePortEntry .1.3.6.1.4.1.259.10.1.43.1.54.22 |
mldSnoopThrottlePortEntryEntry for port configuration in MLD throttling. MldSnoopThrottlePortEntry .1.3.6.1.4.1.259.10.1.43.1.54.22.1 |
mldSnoopThrottlePortIndexThe port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB. Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.22.1.1 |
mldSnoopThrottlePortRunningStatusDescribes the running status of the MLD throttling to the switch.
A value of true(1) indicates the MLD throttling mechanism is active.
A value of false(2) indicates the MLD throttling mechanism is inactive.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.54.22.1.2 |
mldSnoopThrottlePortActionThe action mode of the MLD throttling. A value of replace(1)
means to replace a joined multicast group randomly when an interface
receives an MLD report and the number of current joined multicast groups
is equal to the maximum number of MLD groups that the interface can join.
A value of deny(2) means to deny the MLD report request when an interface
receives an MLD report and the number of current joined multicast groups
is equal to the maximum number of MLD groups that the interface can join.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.54.22.1.3 |
mldSnoopThrottlePortMaxGroupsThe maximum number of MLD groups that the interface can join.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.54.22.1.4 |
mldSnoopThrottlePortCurrentGroupsThe current number of MLD groups that the interface has joined.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.54.22.1.5 |
mldSnoopClearDynamicGroupsThe current number of MLD groups that the interface has joined.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.54.23 |
mldSnoopVlanTableTable of MLD Snooping service per port. SEQUENCE OF MldSnoopVlanEntry .1.3.6.1.4.1.259.10.1.43.1.54.24 |
mldSnoopVlanEntryEntry of MLD Snooping service per VLAN. MldSnoopVlanEntry .1.3.6.1.4.1.259.10.1.43.1.54.24.1 |
mldSnoopVlanIndexVLAN ID VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.54.24.1.1 |
mldSnoopVlanNumGroupsCurrent learned groupsro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.24.1.2 |
mldSnoopVlanNumJoinSendNumber of join send.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.24.1.3 |
mldSnoopVlanNumJoinsNumber of join receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.24.1.4 |
mldSnoopVlanNumJoinSuccessNumber of jion successro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.24.1.5 |
mldSnoopVlanNumLeavesSendNumber of leave send.ro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.24.1.6 |
mldSnoopVlanNumLeavesNumber of leave receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.24.1.7 |
mldSnoopVlanNumGeneralQuerySendNumber of general query sendro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.24.1.8 |
mldSnoopVlanNumGeneralQueryReceviedNumber of general query receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.24.1.9 |
mldSnoopVlanNumSepcificQuerySendNumber of specific query sendro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.24.1.10 |
mldsnoopVlanNumSpecificQueryReceivedNumber of sepcific query receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.24.1.11 |
mldSnoopVlanNumInvalidReportNumber of invalid report receivedro Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.54.24.1.12 |
mldSnoopVlanClearStatisticsClear this VLAN statisticsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.54.24.1.13 |
dynamicArpInspectionMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.56 |
daiGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.56.1 |
daiGlobalStatusSet enabled(1) to enable dynamic ARP inspection.
Set disabled(2) to disable dynamic ARP inspection.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.56.1.1 |
daiGlobalSrcMacValidationSet enabled(1) to enable validation of source MAC address.
Set disabled(2) to disable validation of source MAC
address.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.56.1.2 |
daiGlobalDestMacValidationSet enabled(1) to enable validation of destination
MAC address. Set disabled(2) to disable validation
of destination MAC address.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.56.1.3 |
daiGlobalIpAddrValidationSet enabled(1) to enable validation of IP address.
Set disabled(2) to disable validation of IP address.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.56.1.4 |
daiGlobalLogNumberThe number of log buffers for saving log message.
The value 0 means not generating system messages.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.56.1.5 |
daiGlobalLogIntervalThe value of the time interval for saving log messages.rw Integer32 .1.3.6.1.4.1.259.10.1.43.1.56.1.6 |
daiGlobalAdditionalValidStatusThe vaule of this object is disabled(2) when the status of
daiGlobalSrcMacValidation, daiGlobalDestMacValidation,
and daiGlobalIpAddrValidation are disabled; enabled(1)
when one or more of these variables are enabled.ro EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.56.1.7 |
daiGlobalIpAddrValidationAllowZerosSet enabled(1) to enable validation of IP address allow zeros.
Set disabled(2) to disable validation of IP address allow zeros.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.56.1.8 |
daiVlan OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.56.2 |
daiVlanTableA table contains dynamic ARP inspection configurations
for existing VLANs. SEQUENCE OF DaiVlanEntry .1.3.6.1.4.1.259.10.1.43.1.56.2.1 |
daiVlanEntryAn instance containing the configuration of dynamic ARP
inspection for each existing VLAN. DaiVlanEntry .1.3.6.1.4.1.259.10.1.43.1.56.2.1.1 |
daiVlanIndexThis object indicates the VLAN ID on which dynamic ARP
inspection is configured. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.56.2.1.1.1 |
daiVlanStatusThis object indicates whether dynamic ARP inspection
is enabled in this VLAN.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.56.2.1.1.2 |
daiVlanArpAclNameSpecifies the ARP ACL name bound to the interface.
The default value of daiVlanArpAclStatus is dynamic(2).rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.56.2.1.1.3 |
daiVlanArpAclStatusSet to static(1) means packets not matching the ACL are
dropped. Set to dynamic(2) means packets not matching the
ACL are validated by the DHCP snooping binding table.
When daiVlanArpAclName is configured, the default value
of daiVlanArpAclStatus is dynamic(2).rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.56.2.1.1.4 |
daiInterface OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.56.3 |
daiPortTableA table containing dynamic ARP inspection configurations
for port interfaces. SEQUENCE OF DaiPortEntry .1.3.6.1.4.1.259.10.1.43.1.56.3.1 |
daiPortEntryAn instance containing the configuration of dynamic ARP
inspection at each port interface. DaiPortEntry .1.3.6.1.4.1.259.10.1.43.1.56.3.1.1 |
daiPortIfIndexThe ifIndex value of the port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.56.3.1.1.1 |
daiPortTrustStatusThis object indicates whether the port is trusted for
dynamic ARP inspection.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.56.3.1.1.2 |
daiPortRateLimitThe value of rate limit threshold per second of disposing
ARP messages. Set the value 0xFFFFFFFF as no rate limit.rw Unsigned32(0..2048|'FFFFFFFF'h) .1.3.6.1.4.1.259.10.1.43.1.56.3.1.1.3 |
daiLog OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.56.4 |
daiLogTableA table containing dynamic ARP inspection log
information. SEQUENCE OF DaiLogEntry .1.3.6.1.4.1.259.10.1.43.1.56.4.1 |
daiLogEntryAn instance containing log information of dynamic ARP
inspection at each VLAN interface. DaiLogEntry .1.3.6.1.4.1.259.10.1.43.1.56.4.1.1 |
daiLogIndexThis object indicates the index of dynamic ARP
inspection log information. Integer32 .1.3.6.1.4.1.259.10.1.43.1.56.4.1.1.1 |
daiLogVlanThis object indicates the VLAN ID of dynamic ARP
inspection log information.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.259.10.1.43.1.56.4.1.1.2 |
daiLogPortThis object indicates the ifIndex of dynamic ARP
inspection log information.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.56.4.1.1.3 |
daiLogSrcIpAddressThe source IP address of dynamic ARP inspection
log information.ro IpAddress .1.3.6.1.4.1.259.10.1.43.1.56.4.1.1.4 |
daiLogDestIpAddressThe destination IP address of dynamic ARP inspection
log information.ro IpAddress .1.3.6.1.4.1.259.10.1.43.1.56.4.1.1.5 |
daiLogSrcMacAddressThe source MAC address of dynamic ARP inspection
log information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.56.4.1.1.6 |
daiLogDestMacAddressThe destination MAC address of dynamic ARP inspection
log information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.259.10.1.43.1.56.4.1.1.7 |
daiStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.56.5 |
daiTotalReceivedPktsIndicates the total number of ARP packets received
before rate limiting.ro Counter32 .1.3.6.1.4.1.259.10.1.43.1.56.5.1 |
daiTotalDroppedPktsIndicates the total number of ARP packets dropped
due to rate limt.ro Counter32 .1.3.6.1.4.1.259.10.1.43.1.56.5.2 |
daiTotalProcessedPktsIndicates the total number of ARP packets processed
by ARP inspection.ro Counter32 .1.3.6.1.4.1.259.10.1.43.1.56.5.3 |
daiTotalSrcMacDroppedPktsIndicates the total number of ARP packets dropped
by source MAC address validation.ro Counter32 .1.3.6.1.4.1.259.10.1.43.1.56.5.4 |
daiTotalDestMacDroppedPktsIndicates the total number of ARP packets dropped
by destination MAC address validation.ro Counter32 .1.3.6.1.4.1.259.10.1.43.1.56.5.5 |
daiTotalIpAddrDroppedPktsIndicates the total number of ARP packets dropped
by IP address validation.ro Counter32 .1.3.6.1.4.1.259.10.1.43.1.56.5.6 |
daiTotalArpAclDroppedPktsIndicates the total number of ARP packets dropped
by ARP ACL.ro Counter32 .1.3.6.1.4.1.259.10.1.43.1.56.5.7 |
daiTotalDhcpSnoopingDroppedPktsIndicates the total number of ARP packets dropped
by DHCP snooping.ro Counter32 .1.3.6.1.4.1.259.10.1.43.1.56.5.8 |
timeRangeMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.61 |
timeRangeTableTable for time range. SEQUENCE OF TimeRangeEntry .1.3.6.1.4.1.259.10.1.43.1.61.1 |
timeRangeEntryEntry for time range. TimeRangeEntry .1.3.6.1.4.1.259.10.1.43.1.61.1.1 |
timeRangeIndexThe index of time range entry.ro Integer32 .1.3.6.1.4.1.259.10.1.43.1.61.1.1.1 |
timeRangeNameThe name of time range entry.rw DisplayString .1.3.6.1.4.1.259.10.1.43.1.61.1.1.2 |
timeRangeStatusSetting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.61.1.1.3 |
timeRangePeriodicTableTable for periodic time-range entries. SEQUENCE OF TimeRangePeriodicEntry .1.3.6.1.4.1.259.10.1.43.1.61.2 |
timeRangePeriodicEntryEntry for periodic time-range. TimeRangePeriodicEntry .1.3.6.1.4.1.259.10.1.43.1.61.2.1 |
timeRangePeriodicTimeRangeIndexThe index of time range. The object
should exist in timeRangeIndex of timeRangeTable. Integer32 .1.3.6.1.4.1.259.10.1.43.1.61.2.1.1 |
timeRangePeriodicStartDaysOfTheWeekSpecifies the start days-of-the-week of the periodic time-range entry.
1. If the start days-of-the-week is set to Sunday, MondayK or Saturday
then the end days-of-the-week shall be set to Sunday, MondayK, or Saturday.
1-1. If the start time is equal to the end time (for example: 09:00 - 09:00),
it means that the rule is active in the whole day.
1-2. If the end time is prior to the start time (for example: 05:00 - 01:00),
it means that the rule is inactive from 01:01 to 04:59.
2. If the start days-of-the-week is set to Daily, Weekdays, or Weekend,
then the end days-of-the-week shall be set the same as start,
and the start time shall be before the end time.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.61.2.1.2 |
timeRangePeriodicStartHoursSpecifies the start hours of the periodic time-range entry. Integer32 .1.3.6.1.4.1.259.10.1.43.1.61.2.1.3 |
timeRangePeriodicStartMinutesSpecifies the start minutess of the periodic time-range entry. Integer32 .1.3.6.1.4.1.259.10.1.43.1.61.2.1.4 |
timeRangePeriodicEndDaysOfTheWeekSpecifies the end days-of-the-week of the periodic time-range entry.
1. If the start days-of-the-week is set to Sunday, MondayK or Saturday
then the end days-of-the-week shall be set to Sunday, MondayK, or Saturday.
1-1. If the start time is equal to the end time (for example: 09:00 - 09:00),
it means that the rule is active in the whole day.
1-2. If the end time is prior to the start time (for example: 05:00 - 01:00),
it means that the rule is inactive from 01:01 to 04:59.
2. If the start days-of-the-week is set to Daily, Weekdays, or Weekend,
then the end days-of-the-week shall be set the same as start,
and the start time shall be before the end time.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.61.2.1.5 |
timeRangePeriodicEndHoursSpecifies the end hours of the periodic time-range entry. Integer32 .1.3.6.1.4.1.259.10.1.43.1.61.2.1.6 |
timeRangePeriodicEndMinutesSpecifies the end minutess of the periodic time-range entry. Integer32 .1.3.6.1.4.1.259.10.1.43.1.61.2.1.7 |
timeRangePeriodicStatusSetting this to valid(1) creates an periodic entry.
Setting this to invalid(2) destroys an periodic entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.61.2.1.8 |
timeRangeAbsoluteTableTable for absolute time-range entries. SEQUENCE OF TimeRangeAbsoluteEntry .1.3.6.1.4.1.259.10.1.43.1.61.3 |
timeRangeAbsoluteEntryEntry for absolute time-range. TimeRangeAbsoluteEntry .1.3.6.1.4.1.259.10.1.43.1.61.3.1 |
timeRangeAbsoluteTimeRangeIndexThe index of time range. The object
should exist in timeRangeIndex of timeRangeTable. Integer32 .1.3.6.1.4.1.259.10.1.43.1.61.3.1.1 |
timeRangeAbsoluteStartYearsSpecifies the start years of the absolute time-range entry.
65535 means don't care. Integer32(2013..2037|65535) .1.3.6.1.4.1.259.10.1.43.1.61.3.1.2 |
timeRangeAbsoluteStartMonthsSpecifies the start months of the absolute time-range entry.
255 means don't care. Integer32(1..12|255) .1.3.6.1.4.1.259.10.1.43.1.61.3.1.3 |
timeRangeAbsoluteStartDaysSpecifies the start days of the absolute time-range entry.
255 means don't care. Integer32(1..31|255) .1.3.6.1.4.1.259.10.1.43.1.61.3.1.4 |
timeRangeAbsoluteStartHoursSpecifies the start hours of the absolute time-range entry.\
255 means don't care. Integer32(0..23|255) .1.3.6.1.4.1.259.10.1.43.1.61.3.1.5 |
timeRangeAbsoluteStartMinutesSpecifies the start minutes of the absolute time-range entry.\
255 means don't care. Integer32(0..59|255) .1.3.6.1.4.1.259.10.1.43.1.61.3.1.6 |
timeRangeAbsoluteEndYearsSpecifies the end years of the absolute time-range entry.
65535 means don't care. Integer32(2013..2037|65535) .1.3.6.1.4.1.259.10.1.43.1.61.3.1.7 |
timeRangeAbsoluteEndMonthsSpecifies the end months of the absolute time-range entry.
255 means don't care. Integer32(1..12|255) .1.3.6.1.4.1.259.10.1.43.1.61.3.1.8 |
timeRangeAbsoluteEndDaysSpecifies the end days of the absolute time-range entry.
255 means don't care. Integer32(1..31|255) .1.3.6.1.4.1.259.10.1.43.1.61.3.1.9 |
timeRangeAbsoluteEndHoursSpecifies the end hours of the absolute time-range entry.\
255 means don't care. Integer32(0..23|255) .1.3.6.1.4.1.259.10.1.43.1.61.3.1.10 |
timeRangeAbsoluteEndMinutesSpecifies the end minutes of the absolute time-range entry.\
255 means don't care. Integer32(0..59|255) .1.3.6.1.4.1.259.10.1.43.1.61.3.1.11 |
timeRangeAbsoluteStatusSetting this to valid(1) creates an absolute entry.
Setting this to invalid(2) destroys an absolute entry.rw ValidStatus .1.3.6.1.4.1.259.10.1.43.1.61.3.1.12 |
lbdMgt OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.63 |
lbdGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.63.1 |
lbdGlobalStatusSet enabled(1) to enable global LBD status.
Set disabled(2) to disable global LBD status.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.63.1.1 |
lbdTransmitIntervalThe transmission interval for LBD control frames.rw Unsigned32 .1.3.6.1.4.1.259.10.1.43.1.63.1.2 |
lbdRecoverTimeThe recover time used by LBD auto recovery mechanism. A
value of 0 disables auto recovery.rw Unsigned32(0|60..1000000) .1.3.6.1.4.1.259.10.1.43.1.63.1.3 |
lbdModeThe detection mode of LBD.rwdeprecated Enumeration .1.3.6.1.4.1.259.10.1.43.1.63.1.4 |
lbdActionThe protection action of LBD.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.63.1.5 |
lbdTrapThe kind of SNMP traps for LBD will be sent.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.63.1.6 |
lbdInterface OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.1.63.2 |
lbdPortTableA table containing LBD configurations for all interfaces. SEQUENCE OF LbdPortEntry .1.3.6.1.4.1.259.10.1.43.1.63.2.1 |
lbdPortEntryAn instance containing the configuration of LBD at each
interface. LbdPortEntry .1.3.6.1.4.1.259.10.1.43.1.63.2.1.1 |
lbdPortIfIndexThe ifIndex value of the port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.259.10.1.43.1.63.2.1.1.1 |
lbdPortAdminStateThe LBD administrative port status.rw Enumeration .1.3.6.1.4.1.259.10.1.43.1.63.2.1.1.2 |
lbdPortOperStateThe LBD operative port status.ro Enumeration .1.3.6.1.4.1.259.10.1.43.1.63.2.1.1.3 |
lbdPortLoopedVlanThe list of VLANs on which loopback is detected. Only when
oper state is looped and mode is VLAN-based, the value is
nonzero.ro OCTET STRING .1.3.6.1.4.1.259.10.1.43.1.63.2.1.1.4 |
ecs2100-28ppNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.2 |
ecs2100-28ppTraps OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.2.1 |
ecs2100-28ppTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.2.1.0 |
swPowerStatusChangeTrapThis trap is sent when the power state changes. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.1 |
swPortSecurityTrapThis trap is sent when the port is being intruded. This trap
will only be sent when the portSecActionTrap is enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.36 |
swIpFilterRejectTrapThis trap is sent when an incorrect IP address is rejected by
the ipfilter. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.40 |
pethPsePortOnOffNotificationThis Notification indicates if a Pse Port is delivering power to the PD. This notification SHOULD be sent on
every status change except in searching mode. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.43 |
pethPsePortPowerMaintenanceStatusNotificationThis Notification indicates a Port Change Status and
SHOULD be sent on every status change. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.44 |
pethMainPowerUsageOnNotificationThis Notification indicates PSE Threshold usage indication is
on; the power usage is above the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.45 |
pethMainPowerUsageOffNotificationThis Notification indicates that the PSE Threshold usage indication
is off; the usage power is below the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.46 |
swAtcBcastStormAlarmFireTrapWhen the broadcast traffic is detected as the storm, this trap
will be fired. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.70 |
swAtcBcastStormAlarmClearTrapWhen the broadcast storm is detected as the normal traffic, this
trap will be fired. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.71 |
swAtcBcastStormTcApplyTrapWhen the ATC is activated, this trap will be fired. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.72 |
swAtcBcastStormTcReleaseTrapWhen the ATC is released, this trap will be fired. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.73 |
swAtcMcastStormAlarmFireTrapWhen the multicast traffic is detected as the storm, this trap
will be fired. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.74 |
swAtcMcastStormAlarmClearTrapWhen the multicast storm is detected as the normal traffic, this
trap will be fired. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.75 |
swAtcMcastStormTcApplyTrapWhen the ATC is activated, this trap will be fired. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.76 |
swAtcMcastStormTcReleaseTrapWhen the ATC is released, this trap will be fired. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.77 |
stpBpduGuardPortShutdownTrapThis trap will be sent when an interface is shut down
because of BPDU guard. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.91 |
swLoopbackDetectionTrapThis trap will be sent when loopback BPDUs have been detected. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.95 |
networkAccessPortLinkDetectionTrapThis trap is sent when a networkAccessPortLinkDetection
event is triggered. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.96 |
dot1agCfmMepUpTrapThis trap is sent when a new remote MEP is discovered. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.97 |
dot1agCfmMepDownTrapThis trap is sent when port status or interface status TLV
received from remote MEP indicates it is not up. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.98 |
dot1agCfmConfigFailTrapThis trap is sent when a MEP receives a CCM with MPID
which already exists on the same MA in this switch. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.99 |
dot1agCfmLoopFindTrapThis trap is sent when a MEP receives its own CCMs. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.100 |
dot1agCfmMepUnknownTrapThis trap is sent when a CCM is received from
an unexpected MEP. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.101 |
dot1agCfmMepMissingTrapThis trap is sent when the cross-check enable timer expires
and no CCMs were received from an expected (configured) MEP. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.102 |
dot1agCfmMaUpTrapThis trap is sent when all expected remote MEPs are up. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.103 |
autoUpgradeTrapThis trap is sent when auto upgrade is executed. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.104 |
swCpuUtiRisingNotificationThis notification indicates that the CPU utilization has risen
from cpuUtiFallingThreshold to cpuUtiRisingThreshold. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.107 |
swCpuUtiFallingNotificationThis notification indicates that the CPU utilization has fallen
from cpuUtiRisingThreshold to cpuUtiFallingThreshold. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.108 |
swMemoryUtiRisingThresholdNotificationThis notification indicates that the memory utilization has risen
from memoryUtiFallingThreshold to memoryUtiRisingThreshold. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.109 |
swMemoryUtiFallingThresholdNotificationThis notification indicates that the memory utilization has fallen
from memoryUtiRisingThreshold to memoryUtiFallingThreshold. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.110 |
dhcpRogueServerAttackTrapThis trap is sent when receiving a DHCP packet from a
rogue server. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.114 |
macNotificationTrapThis trap is sent when there are changes of the
dynamic MAC addresses on the switch. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.138 |
lbdDetectionTrapThis trap is sent when a loopback condition is detected
by LBD. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.141 |
lbdRecoveryTrapThis trap is sent when a recovery is done by LBD. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.142 |
sfpThresholdAlarmWarnTrapThis trap is sent when the sfp's A/D quantity is not within alarm/warning thresholds. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.189 |
udldPortShutdownTrapThis trap is sent when the port is shut down by UDLD. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.192 |
userAuthenticationFailureTrapThis trap will be triggered if authentication is fail. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.199 |
userAuthenticationSuccessTrapThis trap will be triggered if authentication is successful. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.200 |
loginTrapThis trap is sent when user login. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.201 |
logoutTrapThis trap is sent when user logout. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.202 |
fileCopyTrapThis trap is sent when file copy is executed.
If the copy action is triggered by system,
the login user information(trapVarLoginUserName/
trapVarSessionType/trapVarLoginInetAddressTypes/
trapVarLoginInetAddres) will be null value. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.208 |
userauthCreateUserTrapThis trap is sent when create user account. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.209 |
userauthDeleteUserTrapThis trap is sent when delete user account. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.210 |
userauthModifyUserPrivilegeTrapThis trap is sent when modify user privilege. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.211 |
cpuGuardControlTrapThis trap is sent when CPU utilization
rises above the high-watermark first time or when CPU utilization
rises from below the low-watermark to above the high-watermark. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.213 |
cpuGuardReleaseTrapThis trap is sent when CPU utilization falls from
above the high-watermark to below the low-watermark. NOTIFICATION-TYPE .1.3.6.1.4.1.259.10.1.43.2.1.0.214 |
ecs2100-10t OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.101 |
ecs2100-10pe OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.102 |
ecs2100-10p OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.103 |
ecs2100-28t OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.104 |
ecs2100-28p OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.105 |
ecs2100-28pp OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.106 |
ecs2100-52t OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.107 |
ecs2110-26t OBJECT IDENTIFIER .1.3.6.1.4.1.259.10.1.43.108 |