Dlink-IMPB-MNG
Detailed view of the defined objects, syntax rules, and hierarchical paths.
23
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
rlIMPBMngTableThe table specifies all IMPB station.
The entry contains IP address and MAC of the station and
also list of ports, packet type and Device type of this station. SEQUENCE OF RlIMPBMngEntry .rlImpbManagment.1 |
rlIMPBMngEntryThe row definition for this table. RlIMPBMngEntry .rlImpbManagment.1.1 |
rlIMPBMngIPAddressIP address of station. IpAddress .rlImpbManagment.1.1.1 |
rlIMPBMngPacketTypePacket type of IMPB.rw IMPBPacketType .rlImpbManagment.1.1.2 |
rlIMPBMngPMACAddressStation mac addressrw MacAddress (SNMPv2-TC) .rlImpbManagment.1.1.3 |
rlIMPBMngDeviceTypeStation typerw IMPBDeviceType .rlImpbManagment.1.1.4 |
rlIMPBMngPortlistList of ports that the station is configured on.rw PortList (Q-BRIDGE-MIB) .rlImpbManagment.1.1.5 |
rlIMPBMngModeIs this station locked or not.rw IMPBLockMode .rlImpbManagment.1.1.6 |
rlIMPBMngRouterBandwidthSpecifies, for Router entry, , egress Bandwidth on the associated ports. Zero means disabled.rw Unsigned32 (0|100..1000000) .rlImpbManagment.1.1.7 |
rlIMPBMngRowStatusA status can be destroy, active or createAndGorw RowStatus (SNMPv2-TC) .rlImpbManagment.1.1.8 |
rlIMPBMngActionAn action scalar which specifies the global action to take on the management DB.rw Enumeration .rlImpbManagment.2 |
rlIMPBMngPortBandwidthTableThe table specifies the Bandwidth value for each Port that at least one Router
station is configured on it. SEQUENCE OF RlIMPBMngPortBandwidthEntry .rlImpbManagment.3 |
rlIMPBMngPortBandwidthEntryThe row definition for this table. RlIMPBMngPortBandwidthEntry .rlImpbManagment.3.1 |
rlIMPBMngBandwidthThis variable specifies what is the Bandwidth value on the specific ifIndex. Zero means disabled.ro Unsigned32 .rlImpbManagment.3.1.1 |
rlIMPBMngRouterBandwidthTableThe table shows the Bandwidth information per configured router SEQUENCE OF RlIMPBMngRouterBandwidthEntry .rlImpbManagment.4 |
rlIMPBMngRouterBandwidthEntryThe row definition for this table. RlIMPBMngRouterBandwidthEntry .rlImpbManagment.4.1 |
rlIMPBRouterIPAddressIP address of station. IpAddress .rlImpbManagment.4.1.1 |
rlIMPBRouterPortlistList of ports that the router is configured on.ro PortList (Q-BRIDGE-MIB) .rlImpbManagment.4.1.2 |
rlIMPBRouterBandwidthThis variable specifies the Bandwidth value for a specific router, Zero means disabled.ro Unsigned32 .rlImpbManagment.4.1.3 |
rlIMPBMngDiscoveryLearningStatusThis variable specifies the discovery is NOW learning or stopped.
Setting an entry in rlIMPBMngDiscoverytTable is conditioned with
a value of this scalar to be set to noLearning.ro Enumeration .rlImpbManagment.5 |
rlIMPBMngUncheckPortsAction scalar that defines which ports the system should be deleted from all
entries in the management MIB. If an entry is remained with empty portlist
the entry will be deleted alsorw PortList (Q-BRIDGE-MIB) .rlImpbManagment.6 |
rlIMPBMngLockedStationsRead-only scalar to count how much locked stations there are in the systemro INTEGER .rlImpbManagment.7 |
rlIMPBMngGratARPPeriodTimeoutThe interval at which ARP Requests are transmitted on
behalf of configured stations.
The default value for rlIMPBGratARPPeriodTimeout object is
Zero, which means don't send ARP Request.
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.rw Unsigned32 (0|30..300) UNITS "seconds" .rlImpbManagment.8 |