DTI-MIB
AI MIB Summary
DTI-MIB enables the configuration and monitoring of DOCSIS Timing Interface (DTI) devices, specifically managing synchronization parameters, timing state transitions, and interface status for cable modem termination systems.
This MIB module provides the management objects necessary to configure and manage the DOCSIS Timing Interface devices.
Main OID:
dtiMib.1.3.6.1.4.1.4491.2.1.7
72
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
72 total| Object Name |
|---|
dtiMibThis MIB module provides the management objects necessary to configure and manage the DOCSIS Timing Interface devices. MODULE-IDENTITY .1.3.6.1.4.1.4491.2.1.7 |
dtiNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.7.0 |
dtiMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.7.1 |
dtiProtocolObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.7.1.1 |
dtiProtocolTableThis table describes the DTI protocol related information contained in Server and Client Frames of a DTI client-server pair. SEQUENCE OF DtiProtocolEntry .1.3.6.1.4.1.4491.2.1.7.1.1.1 |
dtiProtocolEntryA conceptual row entry in the DTI Protocol table. A DTI server has an entry for each client interface. A DTI client has an entry for each server connection. A DTI server (proxy) is a client of the root server DTI input. DtiProtocolEntry .1.3.6.1.4.1.4491.2.1.7.1.1.1.1 |
dtiProtocolEntityTypeThe type of DTI interface of this entry in the managed entity. 'root' indicates the interface generates DTI Server Frames and processes DTI Client Frames from a proxy server or a client. 'server' indicates the interface generates DTI Server Frames and processes DTI Client Frames from a DTI client. 'client' indicates the interface processes DTI Server Frames and generates DTI Client Frames.ro Enumeration .1.3.6.1.4.1.4491.2.1.7.1.1.1.1.1 |
dtiProtocolClientClockTypeThe clock Type of the client as reported in DTI client Frames.ro Enumeration .1.3.6.1.4.1.4491.2.1.7.1.1.1.1.2 |
dtiProtocolServerStatusFlagThe current Operational Status of the server side of the DTI interface. This MIB object should be updated no more than once per second. The Server reports the status of the DTI interface associated to this entry as follows: 'warmup' The server clock has not yet stabilized and has not acquired a stable Time of Day. 'freerun' The server has a stable clock and Time of Day but is not locked to an external clock reference. 'fastTrackingMode' The server is in the process of locking to the timing reference. 'normalMode' The server is locked to the timing reference. 'holdover' The server has lost the timing reference and is in holdover mode. 'clientStable' The server has verified that the Client phase error is acceptable for this DTI interface entry. This value is deprecated as does not indicate the status of the server side of the DTI interface. The performace stable client is reported by dtiProtocolServerClientStableFlag. 'testMode' The server has entered in Test Mode for this DTI entry interface due a set to 'true' of dtiProtocolControlTestMode or because is receiving test mode frames from the DTI client remote end.ro Enumeration .1.3.6.1.4.1.4491.2.1.7.1.1.1.1.3 |
dtiProtocolClientStatusFlagThe current Operational Status of the client side of the DTI interface. This MIB object should be updated no more than once per second. The Client status values are: 'warmup' The client clock has not stabilized yet. 'freerun' The client has a stable clock but has not locked to an external clock reference yet. 'fastTrackingMode' The client is in the process of locking to the timing reference. 'normalMode' The client is locked to the timing reference. 'holdover' The client has lost the timing reference and is in holdover mode. 'bridgingMode' The client has lost its timing reference but is under acceptable operational conditions based on previous data acquired in 'normalMode' state. 'testMode' (Rephrase this definition) The client has entered in Test Mode for this DTI interface entry due to a set to 'true' of dtiProtocolControlTestMode or because is receiving Test Signaling frames from the DTI Server remote end.ro Enumeration .1.3.6.1.4.1.4491.2.1.7.1.1.1.1.4 |
dtiProtocolServerToDStateIndicates the validity of the Time of Day. Possible values are 'valid' and 'invalid'. When the object dtiProtocolControlToDValue Corresponding to this Client-Server connection or the global object dtiServerGlobalToDValue is set by a manager rather than acquired via the protocol, 'valid'. A ToD invalid state could be a consequence of an improper configuration of dtiServerToDSources or connectivity problems within the ToD protocol.ro Enumeration .1.3.6.1.4.1.4491.2.1.7.1.1.1.1.5 |
dtiProtocolServerToDTypeIndicates the current Time of Day source for DTI Server-Client connection. 'default' indicates the ToD of the DTI server is used and implies that this value is not updated via GPS or NTP. 'userTime' indicates the ToD value was configured by the management interface. This object reports 'userTime' when dtiProtocolServerToDValue is set by a manager entity. 'ntpv4' indicates NTP, Network Time Protocol version 4. 'gps' indicates GPS ToD gpssec.ro Enumeration .1.3.6.1.4.1.4491.2.1.7.1.1.1.1.6 |
dtiProtocolServerToDValueThe value of the Time of Day sent by the server in the format DDDDD.YYYY/MM/DD.HH:MM:SS.SHH:F.D independent of being transmitted in short or verbose message format in the DTI Server Frame. Reading this object returns the ToD value for the specific DTI Client-Server connection.ro OCTET STRING .1.3.6.1.4.1.4491.2.1.7.1.1.1.1.7 |
dtiProtocolServerCableAdvanceFlagThis object indicates the cable advance status of the DTI Server Frame. This object is not updated more than once per second. If dtiProtocolServerCableAdvanceValue is set to a valid value by a manager entity, this objects reports 'manual'.ro Enumeration .1.3.6.1.4.1.4491.2.1.7.1.1.1.1.8 |
dtiProtocolServerCableAdvanceValueA Set to zero-length string returns the control of the Cable Advance Field and Cable Advance Flag Bit to the DTI server. Setting this object to a valid value sets the DTI Server Frames Frame Cable Advance field to the specified value and sets the Cable Advance Status Flag BIT to '1' (valid), and sets the object dtiProtocolServerCableAdvanceFlag to 'manual' for this entry.rw DtiCableAdvance UNITS "clockSamples" .1.3.6.1.4.1.4491.2.1.7.1.1.1.1.9 |
dtiProtocolClientPhaseErrorThe phase error measured at the client as reported to the server in the DTI Client Frames. This object is quantified in units of a 149.8MHz clock cycles. This object represents the 16 MSB bits of the 3 octet Client Clock Integrated Phase field.ro Integer32 (-32767..32767) .1.3.6.1.4.1.4491.2.1.7.1.1.1.1.10 |
dtiProtocolClientVersionThis object reports the client DTI protocol version as indicated in the 10-bit field 'CLIENT DTI VERSION'.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.7.1.1.1.1.11 |
dtiProtocolClientPathTraceabilityA reference to the index of dtiPathTraceabilityTable to which this DTI Client-Server connection has associated its traceable path. It is likely that many traceable paths of DTI clients would have the same rootServer and proxy server for multiple Client Server. A manager application can build the Traceability Path, e.g., of a DTI client, if reading this entry from a proxy DTI server as follows: Client: This entry DTI Client IP Address, This entry ifIndex, (see below) dtiProtocolClientVersion Proxy Server: dtiPathTraceabilityServerInetAddr, dtiPathTraceabilityServerOutPhyIdx, dtiPathTraceabilityServerProtVersion RootServer: dtiPathTraceabilityRootServerInetAddr, dtiPathTraceabilityRootServerOutPhyIdx, dtiPathTraceabilityRootServerProtVersion For the DTI client the Physical port would correspond to: PhysicalIndex where entAliasMappingIdentifier.PhysicalIndex = ifIndexro Unsigned32 .1.3.6.1.4.1.4491.2.1.7.1.1.1.1.12 |
dtiProtocolServerClientStableFlagThis object indicates the client performance stable status of the DTI Server Frame. This object is not updated more than once per second.ro Enumeration .1.3.6.1.4.1.4491.2.1.7.1.1.1.1.13 |
dtiProtocolControlTableThis table is an extension of dtiProtocolTable for the control of individual DTI Client-Server connections. SEQUENCE OF DtiProtocolControlEntry .1.3.6.1.4.1.4491.2.1.7.1.1.2 |
dtiProtocolControlEntryA conceptual row entry of this table. DtiProtocolControlEntry .1.3.6.1.4.1.4491.2.1.7.1.1.2.1 |
dtiProtocolControlTimeIntervalThe time interval used to calculate dtiProtocolPerformanceDelay and dtiProtocolPerformanceWanderTSeconds for this Client-Server connection. The value zero indicates the Wander for T Seconds and Protocol Delay is not calculated.rw Unsigned32 .1.3.6.1.4.1.4491.2.1.7.1.1.2.1.1 |
dtiProtocolControlErrorRateIntervalThe time interval used to calculate the value of dtiProtocolPerformanceFrameErrorRate for this Client-Server connection. The value zero indicates no current FER measurements are being taken.rw Unsigned32 .1.3.6.1.4.1.4491.2.1.7.1.1.2.1.2 |
dtiProtocolControlJitterTimeIntervalThe time interval used to calculate dtiProtocolPerformancePeakToPeakJitter for this Client-Server connection. The value zero indicates no Jitter measurements are being taken.rw Unsigned32 .1.3.6.1.4.1.4491.2.1.7.1.1.2.1.3 |
dtiProtocolControlTestModeIf set to 'true' starts the sequence of Test Mode on this DTI Client-Server connection. The Test Mode consist in a sequence of all DTI frames set to '1' before the Manchester line code is applied.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.1.7.1.1.2.1.4 |
dtiProtocolControlToDValueThe control object to specify a particular ToD value to a Client-Server connection. The format of this object is DDDDD.YYYY/MM/DD.HH:MM:SS.SHH:F.D independent of being transmitted in short or verbose message format in the DTI Server Frame. Setting this object to a zero length string resets the ToD source of this DTI Client-Server connection to the current Server ToD reference of dtiServerGlobalToDMethod and dtiServerGlobalToDValue. Reading this value returns the last set value of this object or zero length string if a global ToD value and/or method were lately performed.rw OCTET STRING .1.3.6.1.4.1.4491.2.1.7.1.1.2.1.5 |
dtiProtocolPerformanceTableThe DTI protocol performance metrics of a DTI Client-Server Connection. In the DTI server an entry of this table registers the DTI Client frames performance. In the DTI client the measurements correspond to the DTI server frames performance. SEQUENCE OF DtiProtocolPerformanceEntry .1.3.6.1.4.1.4491.2.1.7.1.1.3 |
dtiProtocolPerformanceEntryA conceptual row entry in the DTI performance table. This table is an extension of dtiProtocolTable for entries with dtiProtocolEntityType equals to 'root' and 'server'. DtiProtocolPerformanceEntry .1.3.6.1.4.1.4491.2.1.7.1.1.3.1 |
dtiProtocolPerformanceDelayThe roundtrip delay measured in nanoseconds.ro Unsigned32 UNITS "nanoseconds" .1.3.6.1.4.1.4491.2.1.7.1.1.3.1.1 |
dtiProtocolPerformanceFrameErrorRateFrame Error Rate (FER) corresponds to the ratio of DTI protocol frames in error and the total of frames received during a period of time. Frames in error and total frames correspond to the delta of ifErrors and ifUcastPackets MIB objects respectively during the period of time defined by dtiFrameErrorRateInterval object. For the DTI server the FER value is based on the DTI client interval frames and for the DTI client, corresponds to the DTI server interval frames.ro Unsigned32 UNITS "FER" .1.3.6.1.4.1.4491.2.1.7.1.1.3.1.2 |
dtiProtocolPerformancePeakToPeakJitterThe maximum phase variation (with frequency components > 10 Hz) in the client frame with respect to the master clock and reported in the DTI client frame for the time interval specified in dtiProtocolControlJitterTimeInterval object.ro Integer32 (-10000..10000) UNITS "picoseconds" .1.3.6.1.4.1.4491.2.1.7.1.1.3.1.3 |
dtiProtocolPerformanceWander35SecondThe largest wander value observed by the server in a 35-second interval for the corresponding Client-Server connection.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.7.1.1.3.1.4 |
dtiProtocolPerformanceWanderTSecondsThe largest wander value observed by the server in a time interval defined by dtiWanderTimeInterval for the corresponding Client-Server connection.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.7.1.1.3.1.5 |
dtiPathTraceabilityTableThe Traceable Path information sent from the DTI server to the client. The traceability path includes node information about DTI root server and DTI server (proxy). The entries of this table are pointed by dtiProtocolTable in both DTI Server and Client. The DTI server may aggregate in a single entry all the root-to-server traceable paths that are common across multiple DTI clients. SEQUENCE OF DtiPathTraceabilityEntry .1.3.6.1.4.1.4491.2.1.7.1.1.4 |
dtiPathTraceabilityEntryA conceptual row entry in the DTI Path Traceability table. This table is an expansion of the dtiProtocolTable for entries with dtiProtocolEntityType equal to 'server' and 'client'. DtiPathTraceabilityEntry .1.3.6.1.4.1.4491.2.1.7.1.1.4.1 |
dtiPathTraceabilityIndexThe index of this conceptual entry. Unsigned32 .1.3.6.1.4.1.4491.2.1.7.1.1.4.1.1 |
dtiPathTraceabilityRootServerInetAddrTypeThe type of internet address for dtiPathTraceabilityRootServerInetAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.7.1.1.4.1.2 |
dtiPathTraceabilityRootServerInetAddrThe IP address of the clock synchronization root server. If this management entity has dtiServerExternalSource 'notExternal' this value returns an empty octet string and dtiPathTraceabilityRootServerInetAddrType. The type of this address is determined by the value of the dtiPathTraceabilityRootServerInetAddrType object.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.7.1.1.4.1.3 |
dtiPathTraceabilityRootServerOutPhyIdxThe physical port number of the clock synchronization root server.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.4491.2.1.7.1.1.4.1.4 |
dtiPathTraceabilityServerInetAddrTypeThe type of internet address for dtiPathTraceabilityServerInetAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.7.1.1.4.1.5 |
dtiPathTraceabilityServerInetAddrThe IP address of the clock synchronization server associated with this management entity. The type of this address is determined by the value of the dtiPathTraceabilityServerInetAddrType object.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.7.1.1.4.1.6 |
dtiPathTraceabilityServerOutPhyIdxThe physical port number of the clock synchronization server associated with this management entity.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.4491.2.1.7.1.1.4.1.7 |
dtiPathTraceabilityRootServerProtVersionThe DTI Protocol Version of the clock synchronization root server.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.7.1.1.4.1.8 |
dtiPathTraceabilityServerProtVersionThe DTI Protocol Version of the clock synchronization server associated with this management entity.ro Unsigned32 .1.3.6.1.4.1.4491.2.1.7.1.1.4.1.9 |
dtiProtocolClientFsmStatsTableStatistics associated to the DTI client state machine. This table contains counters of the most significant DTI finite State machine transitions and states as reported in the DTI Client Frame. Below is a description of the State Transition and counters supported (not all State Transitions need object definitions): T1: Warmup to Free-run Normally once after the clock warms up. Rather than defining a counter for this state transition, the managed system updates the object ifDiscontinuity with the time when the clock performs a transition to Free-run State T2: Free-run to Fast Not defined counter. T2 = T3 + 1 T3: Fast to Free-run (dtiProtocolClientFsmStatsT3Count) T4: Fast to Normal (dtiProtocolClientFsmStatsT4Count) Counts the times the clock enters to the normal mode of operation. T5: Normal to Bridging Not defined counter. T5 = T6 + T7 T6: Bridging to Normal (dtiProtocolClientFsmStatsT6Count) T7: Bridging to Holdover (dtiProtocolClientFsmStatsT7Count) T8: Holdover to Fast No counter defined. If DTI Client State is Holdover, T8 = T7 - 1 other DTI Client State, T8 = T7 This table also includes the active time the DTI client is in Normal state(dtiProtocolClientFsmStatsNormalActiveTime) and Holdover state (dtiProtocolClientFsmStatsHoldoverActiveTime). SEQUENCE OF DtiProtocolClientFsmStatsEntry .1.3.6.1.4.1.4491.2.1.7.1.1.6 |
dtiProtocolClientFsmStatsEntryA conceptual row entry in the DTI FSM Statistics table. In the DTI Server (proxy) this table has an entry for each DTI client interface as well as an entry for each Server (proxy) interface to root server. In the DTI client there is an entry for each client interface. DtiProtocolClientFsmStatsEntry .1.3.6.1.4.1.4491.2.1.7.1.1.6.1 |
dtiProtocolClientFsmStatsT3CountCounts the Transition from Fast to Free-run state (T3). This transition occurs when the client aborts the clock acquisition due to a high Frame Error Rate.ro Counter32 .1.3.6.1.4.1.4491.2.1.7.1.1.6.1.1 |
dtiProtocolClientFsmStatsT4CountCounts the Transition from Fast to Normal state (T4). This transition occurs when the client acquires for the first time or recovers a stable clock reference.ro Counter32 .1.3.6.1.4.1.4491.2.1.7.1.1.6.1.2 |
dtiProtocolClientFsmStatsT6CountCounts the Transition from Bridging to Normal state (T6). This transition occurs when in Bridging mode the Frame Error rate is reduced and the DTI client recovers the clock reference before a bridging mode timeout.ro Counter32 .1.3.6.1.4.1.4491.2.1.7.1.1.6.1.3 |
dtiProtocolClientFsmStatsT7CountCounts the Transition from Bridging to Holdover state (T7). This transition occurs when the client is in Bridging mode, the bridging timeout expires and the DTI client enters in Holdover mode.ro Counter32 .1.3.6.1.4.1.4491.2.1.7.1.1.6.1.4 |
dtiProtocolClientFsmStatsNormalActiveTimeThe cumulative count in 10 KHz clock cycles the DTI client is being in Normal Mode. The percentage of time the DTI client is being operating in Normal Mode is calculated as the ratio of this object and sysUpTime within two consecutive measurements. Note that the value sysUpTime is given in hundreds of seconds, therefore it needs to be multiplied by 100.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.4491.2.1.7.1.1.6.1.5 |
dtiProtocolClientFsmStatsHoldoverActiveTimeThe cumulative count in 10 KHz clock cycles the DTI client is being in Holdover Mode. The percentage of time the DTI client is being operating in Holdover Mode is calculated as the ratio of this object and sysUpTime within two consecutive measurements. Note that the value sysUpTime is given in hundreds of seconds; therefore it needs to be multiplied by 100.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.4491.2.1.7.1.1.6.1.6 |
dtiServerObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.7.1.2 |
dtiServerProperties OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.7.1.2.1 |
dtiServerRootClockTypeThe clock type of the root server this server is connected. If dtiServerHopCount is 'root' the clock type is the self clock. 'ituI' corresponds to an ITU Type I clock. 'ituII' corresponds to an ITU Type II clock. 'ituIII' corresponds to an ITU Type III clock. 'st3' corresponds to an ANSI T1.101 ST3 clock.ro Enumeration .1.3.6.1.4.1.4491.2.1.7.1.2.1.1 |
dtiServerHopCountThis object indicates the type of the DTI server. 'root' indicates the server is the DTI root server. 'proxy' indicates the DTI server is connected to a root DTI server.ro Enumeration .1.3.6.1.4.1.4491.2.1.7.1.2.1.2 |
dtiServerExternalTimingSourceThe type of external clock that provides the reference for this DTI server. 'none' indicates the DTI server has no timing reference input. 'gps' indicates the timing source is GPS. 'network' indicates the timing is obtained from a network such as a PDH, or SONET network.ro Enumeration .1.3.6.1.4.1.4491.2.1.7.1.2.1.3 |
dtiServerToDSourcesIndicates the DTI Server's registered Time of Day sources. A bit set to '1' has the following meaning: 'default' the internal DTI Server ToD reference without external updates. 'userTime' indicates the capability of ToD being set by a manager entity either setting dtiServerGlobalToDValue or dtiProtocolControlToDValue. 'ntpv4' indicates support of NTP Network Time Protocol version 4. 'gps' indicates support of GPS ToD gpssec. The initialization or configuration of GPS or NTPv4 ToD sources is not defined in this MIB module.ro Bits .1.3.6.1.4.1.4491.2.1.7.1.2.1.4 |
dtiServerGlobalParameters OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.7.1.2.2 |
dtiServerGlobalTimeIntervalThe time interval used to calculate dtiProtocolPerformanceDelay and dtiProtocolPerformanceWanderTSeconds for all Client-Server connections of the managed system. A set to this object overrides all the entries of dtiProtocolControlTimeInterval previously configured. The value zero indicates the Wander for T Seconds and Protocol Delay is not calculated.rw Unsigned32 .1.3.6.1.4.1.4491.2.1.7.1.2.2.1 |
dtiServerGlobalErrorRateIntervalThe time interval used to calculate the value of dtiProtocolPerformanceFrameErrorRate for all Client-Server connections of the managed system. A set to this object overrides all the entries of dtiProtocolControlErrorRateInterval previously configured. The value zero indicates no current FER measurements are being taken.rw Unsigned32 .1.3.6.1.4.1.4491.2.1.7.1.2.2.2 |
dtiServerGlobalJitterTimeIntervalThe time interval used to calculate dtiProtocolPerformancePeakToPeakJitter for all Client-Server connections of the managed system. A set to this object overrides all the entries of dtiProtocolControlErrorRateInterval previously configured. The value zero indicates no Jitter measurements are being taken.rw Unsigned32 .1.3.6.1.4.1.4491.2.1.7.1.2.2.3 |
dtiServerGlobalToDMethodSelects the type of ToD Source for the DTI server operation. The set of this object to its enumerated values is described below: 'default' instructs the DTI server to use the last ToD reference as the value for its internal clock. 'userTime' instructs the DTI server to use the value of dtiServerGlobalToDValue for the DTI server internal time ticks clock. 'ntpv4' instructs the DTI server to use the NTP Network Time Protocol version 4 as the ToD reference. 'gps' instructs the DTI server to use the GPS gpssec ToD as the ToD reference. It is recommended to reject an SNMP SET to a particular ToD method if such ToD capability is not active or requires other configuration steps. A successful set of this object sets to a zero length string all the DTI Client-Server connections that previously were set via dtiProtocolControlToDValue to particular ToD Values.rw Enumeration .1.3.6.1.4.1.4491.2.1.7.1.2.2.4 |
dtiServerGlobalToDValueThe control object to specify the ToD value for all DTI server Client-Server connections. The format of this object is DDDDD.YYYY/MM/DD.HH:MM:SS.SHH:F.D independent of being transmitted in short or verbose message format in the DTI Server Frame. A set of this object to a valid value different of zero length string automatically sets dtiServerGlobalToDMethod to 'userTime'. Setting this object to zero re-establishes the ToD source to the current Server ToD reference dtiServerGlobalToDMethod 'default', 'ntpProtocol' or 'gps'.rw OCTET STRING .1.3.6.1.4.1.4491.2.1.7.1.2.2.5 |
dtiClientObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.7.1.3 |
dtiMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.7.2 |
dtiMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.7.2.1 |
dtiMibComplianceThe compliance statement for DTI. Unknown .1.3.6.1.4.1.4491.2.1.7.2.1.1 |
dtiMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.7.2.2 |
dtiBaseGroupGroup of object applicable to DTI Server and DTI Client. Unknown .1.3.6.1.4.1.4491.2.1.7.2.2.1 |
dtiServerGroupGroup of objects applicable to DTI Server only. Unknown .1.3.6.1.4.1.4491.2.1.7.2.2.2 |
dtiClientGroupGroup of objects applicable to DTI Client. Unknown .1.3.6.1.4.1.4491.2.1.7.2.2.3 |