DOCS-TEST-MIB

AI MIB Summary

The DOCS-TEST-MIB enables programmatic control and monitoring of diagnostic test features on DOCSIS 2.0 Cable Modems and Cable Modem Termination Systems, specifically facilitating the execution of loopback tests, signal quality measurements, and transmission parameter verification for compliance validation.

This is the MIB Module supporting programmable test features for DOCSIS 2.0 compliant Cable Modems (CM) and Cable Modem Termination Systems (CMTS).

Main OID:

docsTestMIB.1.3.6.1.4.1.4491.2.1.12

Objects

Active

Status

Dependencies

Imported Objects

SNMPv2-SMI

SNMPv2-TC

SNMPv2-CONF

Objects

23 total

Object Name	Syntax	OID
cableLabs OBJECT IDENTIFIER `.1.3.6.1.4.1.4491`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4491`
clabFunction OBJECT IDENTIFIER `.1.3.6.1.4.1.4491.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4491.1`
clabFuncMib2 OBJECT IDENTIFIER `.1.3.6.1.4.1.4491.1.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4491.1.1`
clabFuncProprietary OBJECT IDENTIFIER `.1.3.6.1.4.1.4491.1.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4491.1.2`
clabProject OBJECT IDENTIFIER `.1.3.6.1.4.1.4491.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4491.2`
clabProjDocsis OBJECT IDENTIFIER `.1.3.6.1.4.1.4491.2.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4491.2.1`
docsTestMIBThis is the MIB Module supporting programmable test features for DOCSIS 2.0 compliant Cable Modems (CM) and Cable Modem Termination Systems (CMTS). MODULE-IDENTITY `.1.3.6.1.4.1.4491.2.1.12`	MODULE-IDENTITY	`.1.3.6.1.4.1.4491.2.1.12`
docsTestMibObjects OBJECT IDENTIFIER `.1.3.6.1.4.1.4491.2.1.12.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4491.2.1.12.1`
docsTestBaseObjects OBJECT IDENTIFIER `.1.3.6.1.4.1.4491.2.1.12.1.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4491.2.1.12.1.1`
docsTestCapabilityIndicates the ability of this device to support the programmable features identified by the TYPE field from the CM/CMTS TLV table in [17]. Each octet within this octet string represents eight tests. For example, the first octet represents tests one through eight (with the msb representing test one) as identified by the TYPE field.ro OCTET STRING `.1.3.6.1.4.1.4491.2.1.12.1.1.1`	OCTET STRING	`.1.3.6.1.4.1.4491.2.1.12.1.1.1`
docsTestStatusIndicates the current operating status of tests initiated through the docsTestSetupObjects. The octet representation is identical to that used by docsTestCapability. A bit representation of one indicates that a test is currently active, while zero indicates the test is inactive or has completed.ro OCTET STRING `.1.3.6.1.4.1.4491.2.1.12.1.1.2`	OCTET STRING	`.1.3.6.1.4.1.4491.2.1.12.1.1.2`
docsTestSetupObjects OBJECT IDENTIFIER `.1.3.6.1.4.1.4491.2.1.12.1.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4491.2.1.12.1.2`
docsTestTypeCorresponds to the TYPE field from the CM/CMTS TLV Table in [17]. The default value of zero indicates no test has yet been initiated. A WrongValueError should be returned in response to a write request for a test not supported by the device. A read request will return the docsTestType value last successfully written, whether that test is active or inactive.rw Integer32 `.1.3.6.1.4.1.4491.2.1.12.1.2.1`	Integer32	`.1.3.6.1.4.1.4491.2.1.12.1.2.1`
docsTestDataThe OCTET STRING length and value correspond to the LENGTH and VALUE fields from the CM/CMTS TLV Table in [17]. A read request will return the docsTestData value last successfully written, whether that test is active or inactive.rw OCTET STRING `.1.3.6.1.4.1.4491.2.1.12.1.2.2`	OCTET STRING	`.1.3.6.1.4.1.4491.2.1.12.1.2.2`
docsTestEnableUsed to initiate or stop the tests setup through the docsTestType and docsTestData objects. A CommitFailedError should be returned in response to a TRUE Write request if the values in docsTestType and docsTestData are incompatible, or a test could not be initiated for any other reason.rw TruthValue (SNMPv2-TC) `.1.3.6.1.4.1.4491.2.1.12.1.2.3`	TruthValue (SNMPv2-TC)	`.1.3.6.1.4.1.4491.2.1.12.1.2.3`
docsTestConformance OBJECT IDENTIFIER `.1.3.6.1.4.1.4491.2.1.12.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4491.2.1.12.2`
docsTestCompliances OBJECT IDENTIFIER `.1.3.6.1.4.1.4491.2.1.12.2.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4491.2.1.12.2.1`
docsTestBasicComplianceThe compliance statement for devices that implement the DOCSIS compliant programmable test features. Unknown `.1.3.6.1.4.1.4491.2.1.12.2.1.1`	Unknown	`.1.3.6.1.4.1.4491.2.1.12.2.1.1`
docsTestGroups OBJECT IDENTIFIER `.1.3.6.1.4.1.4491.2.1.12.2.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4491.2.1.12.2.2`
docsTestGroupGroup of objects implemented in both Cable Modems and Cable Modem Termination Systems. Unknown `.1.3.6.1.4.1.4491.2.1.12.2.2.1`	Unknown	`.1.3.6.1.4.1.4491.2.1.12.2.2.1`
clabProjPacketCable OBJECT IDENTIFIER `.1.3.6.1.4.1.4491.2.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4491.2.2`
clabProjOpenCable OBJECT IDENTIFIER `.1.3.6.1.4.1.4491.2.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4491.2.3`
clabProjCableHome OBJECT IDENTIFIER `.1.3.6.1.4.1.4491.2.4`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.4491.2.4`

More MIBs from Cable Television Laboratories

Browse all Cable Television LaboratoriesMIBs →

CLAB-WIFI-MIB

The CLAB-WIFI-MIB module provides SNMP management objects for monitoring and configuring Wi-Fi interface parameters on Cable Television Laboratories, Inc. (CableLabs) compliant hardware. It exposes specific metrics for wireless interface status, operational states, and performance counters to facilitate network troubleshooting and configuration management.

SNMP MIB module

The OC-STB-HOST-MIB module defines managed objects for monitoring and controlling OpenCable Set-top Host (STB) devices, specifically tracking host-side operational status, cable modem interface states, and service provisioning parameters within the DOCSIS/OpenCable architecture.

SNMP MIB module

SNMP MIB module

SNMP MIB module