DOCS-RPHY-CTRL-MIB
This MIB module contains the control management objects for the Remote PHY Device (RPD) management. Copyright 2017 Cable Television Laboratories, Inc. All rights reserved.
Main OID:
docsRphyCtrlMib.1.3.6.1.4.1.4491.2.1.31
40
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
40 total| Object Name |
|---|
docsRphyCtrlMibThis MIB module contains the control management objects for
the Remote PHY Device (RPD) management.
Copyright 2017 Cable Television Laboratories, Inc.
All rights reserved. MODULE-IDENTITY .1.3.6.1.4.1.4491.2.1.31 |
docsRphyCtrlNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.31.0 |
docsRphyCtrlObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.31.1 |
docsRphyCtrlRpdMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.31.1.1 |
docsRphyCtrlRpdResetCtrlTableThis table allows an RPD to be reset remotely via GCP
from the Principal CCAP Core. SEQUENCE OF DocsRphyCtrlRpdResetCtrlEntry .1.3.6.1.4.1.4491.2.1.31.1.1.1 |
docsRphyCtrlRpdResetCtrlEntryThe conceptual row of docsRphyCtrlRpdResetCtrlTable. DocsRphyCtrlRpdResetCtrlEntry .1.3.6.1.4.1.4491.2.1.31.1.1.1.1 |
docsRphyCtrlRpdResetCtrlResetThis attribute allows a reset of the RPD to be commanded.
Reading this attribute always returns a value of softReset.
The following reset states are supported:
softReset(1) : The device performs a soft reset.
hardReset(2) : The device performs a power-on reset.
nvReset(3) : The device clears most non-volatile
configuration and performs a hard reset.
Refer to [R-PHY] for details on which
configuration attributes are cleared.
factoryReset(4): The device restores the factory
configuration and performs a hard reset.rw RphyResetCtrlType .1.3.6.1.4.1.4491.2.1.31.1.1.1.1.1 |
docsRphyCtrlRpdLogCtrlTableThis table provides RPD log management functions. SEQUENCE OF DocsRphyCtrlRpdLogCtrlEntry .1.3.6.1.4.1.4491.2.1.31.1.1.2 |
docsRphyCtrlRpdLogCtrlEntryThe conceptual row of docsRphyRpdLogCtrlTable. DocsRphyCtrlRpdLogCtrlEntry .1.3.6.1.4.1.4491.2.1.31.1.1.2.1 |
docsRphyCtrlRpdResetLogThis attribute controls resetting an RPD's local event log
and/or the pending event queue. Reading this value returns
the value zero. Setting an individual bit to 1 resets the
corresponding RPD log or queue.rw Bits .1.3.6.1.4.1.4491.2.1.31.1.1.2.1.1 |
docsRphyCtrlRpdSsdCtrlTableThis table describes secure software downloads of software
running on RPDs. SEQUENCE OF DocsRphyCtrlRpdSsdCtrlEntry .1.3.6.1.4.1.4491.2.1.31.1.1.3 |
docsRphyCtrlRpdSsdCtrlEntryThe conceptual row of docsRphyCtrlRpdSsdCtrlTable. DocsRphyCtrlRpdSsdCtrlEntry .1.3.6.1.4.1.4491.2.1.31.1.1.3.1 |
docsRphyCtrlRpdSsdCtrlServerAddressTypeThis attribute identifies the SSD server in the form of
IPv4 or IPv6 address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.31.1.1.3.1.1 |
docsRphyCtrlRpdSsdCtrlServerAddressThis attribute identifies the SSD server in the form of
IPv4 or IPv6 address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.31.1.1.3.1.2 |
docsRphyCtrlRpdSsdCtrlTransportThis attribute communicates the type of transport for
the RPD download of the software file. The supported
transports are TFTP and HTTP.rw RphySsdTransportType .1.3.6.1.4.1.4491.2.1.31.1.1.3.1.3 |
docsRphyCtrlRpdSsdCtrlFilenameThis attribute is used to communicate the name of the software
file that the RPD needs to download.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.31.1.1.3.1.4 |
docsRphyCtrlRpdSsdCtrlManufCvcChainThis attribute is used to communicate the certificate chain
from the new PKI that contains both the Manufacturer Code
Verification Certificate and the certification authority (CA)
certificate that issued the Manufacturer Code Verification
Certificate for Secure Software Download. The Manufacturer
CVC Chain TLV (M-CVC-C) is used to enable the RPD to download
the code file from the download server.rw OCTET STRING .1.3.6.1.4.1.4491.2.1.31.1.1.3.1.5 |
docsRphyCtrlRpdSsdCtrlCosignerCvcChainThis attribute is used to communicate the certificate chain from
the new PKI that contains both the Co-signer Code Verification
Certificate and the certification authority (CA) certificate that
issued the Co-signer Code Verification Certificate for Secure
Software Download. The Co-signer CVC Chain TLV (C-CVC-C) is used
to enable the RPD to download the code file from the download server.rw OCTET STRING .1.3.6.1.4.1.4491.2.1.31.1.1.3.1.6 |
docsRphyCtrlRpdSsdCtrlAdminControlThis attribute allows the CCAP Core to maintain control over
the SSD process. When read, this attribute returns other.rw RphySsdAdminControlType .1.3.6.1.4.1.4491.2.1.31.1.1.3.1.7 |
docsRphyCtrlRpdSsdCtrlStatusThis attribute reports the status of the SSD process in the RPD.ro RphySsdStatusType .1.3.6.1.4.1.4491.2.1.31.1.1.3.1.8 |
docsRphyCtrlRpdCrashDataFileCtrlTableThis table provides CCAP Core control attributes needed to
initiate an RPD upload of a crash analysis file to the Server SEQUENCE OF DocsRphyCtrlRpdCrashDataFileCtrlEntry .1.3.6.1.4.1.4491.2.1.31.1.1.4 |
docsRphyCtrlRpdCrashDataFileCtrlEntryThe conceptual row of docsRphyCtrlRpdCrashDataFileCtrlTable. DocsRphyCtrlRpdCrashDataFileCtrlEntry .1.3.6.1.4.1.4491.2.1.31.1.1.4.1 |
docsRphyCtrlRpdCrashDataFileCtrlIndexThis key attribute uniquely identifies a particular
device crash analysis file. Unsigned32 .1.3.6.1.4.1.4491.2.1.31.1.1.4.1.1 |
docsRphyCtrlRpdCrashDataFileCtrlFileControlThis attribute controls the action taken by the device regarding
the file selected by Index attribute. When a value is written to
this attribute for a given instance of the RpdCrashDataFileCtrl
object, the device is required to take that action on the associated
crash data file. The possible actions are:
other(1) - This value is returned when the attribute is read.
This value is not writeable.
upload(2) – If the FileControl attribute of the
RpdCrashDataFileCtrl object is set to 'upload',
the CCAP Core MUST signal the RPD to initiate an upload
to the server with the parameters specified in the
'DestIpAddr', 'DestIpAddrType', and 'DestPath'
attributes of the RpdCrashDataServerCtrl object.
cancelUpload(3) - If the FileControl attribute of the
RpdCrashDataFileCtrl object is set to 'cancelUpload',
the CCAP Core MUST signal the RPD to cancel a
pending upload.
deleteFile(4) - If the FileControl attribute of the
RpdCrashDataFileCtrl object is set to 'deleteFile',
the CCAP Core MUST signal the RPD to delete the file
from its memory.
uploadAndDelete(5) - If the FileControl attribute of the
RpdCrashDataFileCtrl object is set to 'uploadAndDelete',
the CCAP Core MUST signal the RPD to upload the
selected file and upon successful completion of the
upload, delete the file from its memory.rw RphyCrashDataFileControlType .1.3.6.1.4.1.4491.2.1.31.1.1.4.1.2 |
docsRphyCtrlRpdCrashDataServerCtrlTableThis table provides the CCAP Core control attributes needed
by the RPD to describe the upload server for crash analysis files SEQUENCE OF DocsRphyCtrlRpdCrashDataServerCtrlEntry .1.3.6.1.4.1.4491.2.1.31.1.1.5 |
docsRphyCtrlRpdCrashDataServerCtrlEntryThe conceptual row of docsRphyCtrlRpdCrashDataServerCtrlTable. DocsRphyCtrlRpdCrashDataServerCtrlEntry .1.3.6.1.4.1.4491.2.1.31.1.1.5.1 |
docsRphyCtrlRpdCrashDataServerCtrlDestIpAddrTypeThe address type of docsRphyCtrlRpdCrashDataServerCtrlDestIpAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.31.1.1.5.1.1 |
docsRphyCtrlRpdCrashDataServerCtrlDestIpAddrThis attribute represents the IP address of the server to which
the crash analysis file is to be sent.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.1.31.1.1.5.1.2 |
docsRphyCtrlRpdCrashDataServerCtrlDestPathThis attribute represents the path, excluding the filename,
at the server to which the crash analysis file is to be sent.
By default, the value of this attribute is an empty string.
If used, this value includes all expected delimiters.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.1.31.1.1.5.1.3 |
docsRphyCtrlRpdCrashDataServerCtrlProtocolThis attribute represents the IP address of the server to which
the crash analysis file is to be sent.rw RphyCrashDataServerControlProtocolType .1.3.6.1.4.1.4491.2.1.31.1.1.5.1.4 |
docsRphyCtrlRpdInitProvCtrlTableThis table allows the asset ID, device alias, and
location of the RPD to be updated by the operator once
an RPD is authenticated to the CCAP Core. Generally,
the values of these attributes are provisioned on the RPD
as part of the staging or installation process. However,
there could be occasions when an operator needs to update
these values on an RPD that is already in service. SEQUENCE OF DocsRphyCtrlRpdInitProvCtrlEntry .1.3.6.1.4.1.4491.2.1.31.1.1.6 |
docsRphyCtrlRpdInitProvCtrlEntryThe conceptual row of docsRphyCtrlRpdInitProvCtrlTable. DocsRphyCtrlRpdInitProvCtrlEntry .1.3.6.1.4.1.4491.2.1.31.1.1.6.1 |
docsRphyCtrlRpdInitProvCtrlAssetIdThis attribute is used to communicate the asset tracking
identifier as assigned by a network manager. When this
attribute is written, the RPD stores its value in its
non-volatile configuration.rw SnmpAdminString .1.3.6.1.4.1.4491.2.1.31.1.1.6.1.1 |
docsRphyCtrlRpdInitProvCtrlDeviceAliasThis attribute communicates a device name assigned by the
operator via management interface. This attribute is an 'alias'
name for the device as specified by a network manager, and
provides a non-volatile 'handle' for the RPD. When this
attribute is written, the RPD stores its value in its
non-volatile configuration.rw SnmpAdminString .1.3.6.1.4.1.4491.2.1.31.1.1.6.1.2 |
docsRphyCtrlRpdInitProvCtrlLocationDescriptionThis attribute allows a short text description to be written
to the RPD describing where the RPD has been installed, such
as a street address. The format is specific to the operator.
When this attribute is written, the RPD stores its value in
its non-volatile configuration.rw SnmpAdminString .1.3.6.1.4.1.4491.2.1.31.1.1.6.1.3 |
docsRphyCtrlRpdInitProvCtrlGeoLocationLatitudeThis attribute allows the latitude portion of the RPD’s
geographic location to be written to the RPD. It consists
of a 9-byte string formatted as specified in ISO 6709-2008.
The RPD uses '6-digit notation' in the format:
deg, min, sec, ±DDMMSS.S (for example: -750015.1).
A value of '+000000.0' indicates that the latitude is not set.
When this attribute is written, the RPD stores its value in its
non-volatile configuration.rw SnmpAdminString .1.3.6.1.4.1.4491.2.1.31.1.1.6.1.4 |
docsRphyCtrlRpdInitProvCtrlGeoLocationLongitudeThis attribute allows the longitude portion of the RPD’s
geographic location to be written to the RPD. It consists
of a 10-byte long string formatted as specified in ISO 6709-2008.
The RPD uses '7-digit notation' in the format:
deg, min, sec, ±DDDMMSS.S (for example: -0100015.1).
A value of '+0000000.0' indicates that the longitude is not set.
When this attribute is written, the RPD stores its value in its
non-volatile configuration.rw SnmpAdminString .1.3.6.1.4.1.4491.2.1.31.1.1.6.1.5 |
docsRphyCtrlConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.31.2 |
docsRphyCtrlCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.31.2.1 |
docsRphyCtrlGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.1.31.2.2 |