DOCS-BPI2-MIB
AI MIB Summary
The DOCS-BPI2-MIB enables monitoring and management of DOCSIS Baseline Privacy Plus (BPI+) security associations, key exchange states, and cryptographic session parameters on Cable Modems and Cable Modem Termination Systems. It provides specific counters and gauges for tracking authentication failures, key rollover events, and privacy association establishment status to ensure secure data transmission over the HFC network.
This is the MIB Module for the DOCSIS Baseline Privacy Plus Interface (BPI+) at cable modems (CMs) and cable modem termination systems (CMTSs).
192
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
192 total| Object Name |
|---|
docsBpi2MIB OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6 |
RFC1155-SMI Unknown .1.3.6.1.2.1.10.127.6 |
docsBpi2MIBObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.1 |
docsBpi2CmObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.1.1 |
docsBpi2CmBaseTableThis table describes the basic and authorization
related Baseline Privacy Plus attributes of each CM MAC
interface. SEQUENCE OF DocsBpi2CmBaseEntry .1.3.6.1.2.1.10.127.6.1.1.1 |
docsBpi2CmBaseEntryEach entry contains objects describing attributes of
one CM MAC interface. An entry in this table exists for each
ifEntry with an ifType of docsCableMaclayer(127). DocsBpi2CmBaseEntry .1.3.6.1.2.1.10.127.6.1.1.1.1 |
docsBpi2CmPrivacyEnableThis object identifies whether this CM is
provisioned to run Baseline Privacy Plus.ro TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.2.1.10.127.6.1.1.1.1.1 |
docsBpi2CmPublicKeyThe value of this object is a DER-encoded
RSAPublicKey ASN.1 type string, as defined in the RSA
Encryption Standard (PKCS #1) [10], corresponding to the
public key of the CM. The 74, 106, 140, 204, and 270 byte key
encoding lengths correspond to 512 bit, 768 bit, 1024 bit,
1536 bit, and 2048 public moduli respectively.ro OCTET STRING .1.3.6.1.2.1.10.127.6.1.1.1.1.2 |
docsBpi2CmAuthStateThe value of this object is the state of the CM
authorization FSM. The start state indicates that FSM is in
its initial state.ro Enumeration .1.3.6.1.2.1.10.127.6.1.1.1.1.3 |
docsBpi2CmAuthKeySequenceNumberThe value of this object is the most recent
authorization key sequence number for this FSM.ro INTEGER .1.3.6.1.2.1.10.127.6.1.1.1.1.4 |
docsBpi2CmAuthExpiresOldThe value of this object is the actual clock time for
expiration of the immediate predecessor of the most recent
authorization key for this FSM. If this FSM has only one
authorization key, then the value is the time of activation
of this FSM.ro DateAndTime -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.1.1.1.5 |
docsBpi2CmAuthExpiresNewThe value of this object is the actual clock time for
expiration of the most recent authorization key for this FSM.ro DateAndTime -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.1.1.1.6 |
docsBpi2CmAuthResetSetting this object to TRUE generates a Reauthorize
event in the authorization FSM. Reading this object always
returns FALSE.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.2.1.10.127.6.1.1.1.1.7 |
docsBpi2CmAuthGraceTimeThe value of this object is the grace time for an
authorization key. A CM is expected to start trying to get a
new authorization key beginning AuthGraceTime seconds before
the authorization key actually expires.ro INTEGER .1.3.6.1.2.1.10.127.6.1.1.1.1.8 |
docsBpi2CmTEKGraceTimeThe value of this object is the grace time for
the TEK in seconds. The CM is expected to start trying to
acquire a new TEK beginning TEK GraceTime seconds before
the expiration of the most recent TEK.ro INTEGER .1.3.6.1.2.1.10.127.6.1.1.1.1.9 |
docsBpi2CmAuthWaitTimeoutThe value of this object is the Authorize Wait
Timeout.ro INTEGER .1.3.6.1.2.1.10.127.6.1.1.1.1.10 |
docsBpi2CmReauthWaitTimeoutThe value of this object is the Reauthorize Wait
Timeout in seconds.ro INTEGER .1.3.6.1.2.1.10.127.6.1.1.1.1.11 |
docsBpi2CmOpWaitTimeoutThe value of this object is the Operational Wait
Timeout in seconds.ro INTEGER .1.3.6.1.2.1.10.127.6.1.1.1.1.12 |
docsBpi2CmRekeyWaitTimeoutThe value of this object is the Rekey Wait Timeout
in seconds.ro INTEGER .1.3.6.1.2.1.10.127.6.1.1.1.1.13 |
docsBpi2CmAuthRejectWaitTimeoutThe value of this object is the Authorization Reject
Wait Timeout in seconds.ro INTEGER .1.3.6.1.2.1.10.127.6.1.1.1.1.14 |
docsBpi2CmSAMapWaitTimeoutThe value of this object is the retransmission
interval, in seconds, of SA Map Requests from the MAP Wait
state.ro INTEGER .1.3.6.1.2.1.10.127.6.1.1.1.1.15 |
docsBpi2CmSAMapMaxRetriesThe value of this object is the maximum number of
Map Request retries allowed.ro INTEGER .1.3.6.1.2.1.10.127.6.1.1.1.1.16 |
docsBpi2CmAuthentInfosThe value of this object is the count of times the CM
has transmitted an Authentication Information message.ro Counter .1.3.6.1.2.1.10.127.6.1.1.1.1.17 |
docsBpi2CmAuthRequestsThe value of this object is the count of times the CM
has transmitted an Authorization Request message.ro Counter .1.3.6.1.2.1.10.127.6.1.1.1.1.18 |
docsBpi2CmAuthRepliesThe value of this object is the count of times the CM
has received an Authorization Reply message.ro Counter .1.3.6.1.2.1.10.127.6.1.1.1.1.19 |
docsBpi2CmAuthRejectsThe value of this object is the count of times the CM
has received an Authorization Reject message.ro Counter .1.3.6.1.2.1.10.127.6.1.1.1.1.20 |
docsBpi2CmAuthInvalidsThe value of this object is the count of times the CM
has received an Authorization Invalid message.ro Counter .1.3.6.1.2.1.10.127.6.1.1.1.1.21 |
docsBpi2CmAuthRejectErrorCodeThe value of this object is the enumerated
description of the Error-Code in most recent Authorization
Reject message received by the CM. This has value unknown(2)
if the last Error-Code value was 0, and none(1) if no
Authorization Reject message has been received since reboot.ro Enumeration .1.3.6.1.2.1.10.127.6.1.1.1.1.22 |
docsBpi2CmAuthRejectErrorStringThe value of this object is the Display-String in
most recent Authorization Reject message received by the CM.
This is a zero length string if no Authorization Reject
message has been received since reboot.ro SnmpAdminString .1.3.6.1.2.1.10.127.6.1.1.1.1.23 |
docsBpi2CmAuthInvalidErrorCodeThe value of this object is the enumerated
description of the Error-Code in most recent Authorization
Invalid message received by the CM. This has value unknown(2)
if the last Error-Code value was 0, and none(1) if no
Authorization Invalid message has been received since reboot.ro Enumeration .1.3.6.1.2.1.10.127.6.1.1.1.1.24 |
docsBpi2CmAuthInvalidErrorStringThe value of this object is the Display-String in
most recent Authorization Invalid message received by the CM.
This is a zero length string if no Authorization Invalid
message has been received since reboot.ro SnmpAdminString .1.3.6.1.2.1.10.127.6.1.1.1.1.25 |
docsBpi2CmTEKTableThis table describes the attributes of each CM
Traffic Encryption Key(TEK) association. The CM maintains (no
more than) one TEK association per SAID per CM MAC interface. SEQUENCE OF DocsBpi2CmTEKEntry .1.3.6.1.2.1.10.127.6.1.1.2 |
docsBpi2CmTEKEntryEach entry contains objects describing the TEK
association attributes of one SAID. The CM MUST create one
entry per SAID, regardless of whether the SAID was obtained
from a Registration Response message, from an Authorization
Reply message, or from any dynamic SAID establishment
mechanisms. DocsBpi2CmTEKEntry .1.3.6.1.2.1.10.127.6.1.1.2.1 |
docsBpi2CmTEKSAIdThe value of this object is the DOCSIS Security
Association ID (SAID). INTEGER .1.3.6.1.2.1.10.127.6.1.1.2.1.1 |
docsBpi2CmTEKSATypeThe value of this object is the type of security
association.ro Enumeration .1.3.6.1.2.1.10.127.6.1.1.2.1.2 |
docsBpi2CmTEKDataEncryptAlgThe value of this object is the data encryption
algorithm being utilized.ro Enumeration .1.3.6.1.2.1.10.127.6.1.1.2.1.3 |
docsBpi2CmTEKDataAuthentAlgThe value of this object is the data authentication
algorithm being utilized.ro Enumeration .1.3.6.1.2.1.10.127.6.1.1.2.1.4 |
docsBpi2CmTEKStateThe value of this object is the state of the
indicated TEK FSM. The start(1) state indicates that FSM is
in its initial state.ro Enumeration .1.3.6.1.2.1.10.127.6.1.1.2.1.5 |
docsBpi2CmTEKKeySequenceNumberThe value of this object is the most recent TEK
key sequence number for this TEK FSM.ro INTEGER .1.3.6.1.2.1.10.127.6.1.1.2.1.6 |
docsBpi2CmTEKExpiresOldThe value of this object is the actual clock time for
expiration of the immediate predecessor of the most recent TEK
for this FSM. If this FSM has only one TEK, then the value is
the time of activation of this FSM.ro DateAndTime -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.1.2.1.7 |
docsBpi2CmTEKExpiresNewThe value of this object is the actual clock time for
expiration of the most recent TEK for this FSM.ro DateAndTime -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.1.2.1.8 |
docsBpi2CmTEKKeyRequestsThe value of this object is the count of times the CM
has transmitted a Key Request message.ro Counter .1.3.6.1.2.1.10.127.6.1.1.2.1.9 |
docsBpi2CmTEKKeyRepliesThe value of this object is the count of times the CM
has received a Key Reply message, including a message whose
authentication failed.ro Counter .1.3.6.1.2.1.10.127.6.1.1.2.1.10 |
docsBpi2CmTEKKeyRejectsThe value of this object is the count of times the CM
has received a Key Reject message, including a message whose
authentication failed.ro Counter .1.3.6.1.2.1.10.127.6.1.1.2.1.11 |
docsBpi2CmTEKInvalidsThe value of this object is the count of times the CM
has received a TEK Invalid message, including a message whose
authentication failed.ro Counter .1.3.6.1.2.1.10.127.6.1.1.2.1.12 |
docsBpi2CmTEKAuthPendsThe value of this object is the count of times an
Authorization Pending (Auth Pend) event occurred in this FSM.ro Counter .1.3.6.1.2.1.10.127.6.1.1.2.1.13 |
docsBpi2CmTEKKeyRejectErrorCodeThe value of this object is the enumerated
description of the Error-Code in most recent Key Reject
message received by the CM. This has value unknown(2) if the
last Error-Code value was 0, and none(1) if no Key Reject
message has been received since reboot.ro Enumeration .1.3.6.1.2.1.10.127.6.1.1.2.1.14 |
docsBpi2CmTEKKeyRejectErrorStringThe value of this object is the Display-String in
most recent Key Reject message received by the CM. This is a
zero length string if no Key Reject message has been received
since reboot.ro SnmpAdminString .1.3.6.1.2.1.10.127.6.1.1.2.1.15 |
docsBpi2CmTEKInvalidErrorCodeThe value of this object is the enumerated
description of the Error-Code in most recent TEK Invalid
message received by the CM. This has value unknown(2) if the
last Error-Code value was 0, and none(1) if no TEK Invalid
message has been received since reboot.ro Enumeration .1.3.6.1.2.1.10.127.6.1.1.2.1.16 |
docsBpi2CmTEKInvalidErrorStringThe value of this object is the Display-String in
most recent TEK Invalid message received by the CM. This is a
zero length string if no TEK Invalid message has been received
since reboot.ro SnmpAdminString .1.3.6.1.2.1.10.127.6.1.1.2.1.17 |
docsBpi2CmMulticastObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.1.1.3 |
docsBpi2CmIpMulticastMapTableThis table maps multicast IP addresses to SAIDs.
It is intended to map multicast IP addresses associated
with SA MAP Request messages. SEQUENCE OF DocsBpi2CmIpMulticastMapEntry .1.3.6.1.2.1.10.127.6.1.1.3.1 |
docsBpi2CmIpMulticastMapEntryEach entry contains objects describing the mapping of
one multicast IP address to one SAID, as well as
associated state, message counters, and error information. DocsBpi2CmIpMulticastMapEntry .1.3.6.1.2.1.10.127.6.1.1.3.1.1 |
docsBpi2CmIpMulticastIndexThe index of this row. INTEGER .1.3.6.1.2.1.10.127.6.1.1.3.1.1.1 |
docsBpi2CmIpMulticastAddressTypeThe type of internet address for
docsBpi2CmIpMulticastAddress.ro InetAddressType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- unknown(0), -- ipv4(1), -- ipv6(2), -- dns(16) -- } .1.3.6.1.2.1.10.127.6.1.1.3.1.1.2 |
docsBpi2CmIpMulticastAddressThis object represents the IP multicast address
to be mapped.ro InetAddress -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.1.3.1.1.3 |
docsBpi2CmIpMulticastSAIdThis object represents the SAID to which the IP
multicast address has been mapped. If no SA Map Reply has
been received for the IP address, this object should have the
value 0.ro INTEGER .1.3.6.1.2.1.10.127.6.1.1.3.1.1.4 |
docsBpi2CmIpMulticastSAMapStateThe value of this object is the state of the SA
Mapping FSM for this IP.ro Enumeration .1.3.6.1.2.1.10.127.6.1.1.3.1.1.5 |
docsBpi2CmIpMulticastSAMapRequestsThe value of this object is the count of times the
CM has transmitted an SA Map Request message for this IP.ro Counter .1.3.6.1.2.1.10.127.6.1.1.3.1.1.6 |
docsBpi2CmIpMulticastSAMapRepliesThe value of this object is the count of times the
CM has received an SA Map Reply message for this IP.ro Counter .1.3.6.1.2.1.10.127.6.1.1.3.1.1.7 |
docsBpi2CmIpMulticastSAMapRejectsThe value of this object is the count of times the
CM has received an SA MAP Reject message for this IP.ro Counter .1.3.6.1.2.1.10.127.6.1.1.3.1.1.8 |
docsBpi2CmIpMulticastSAMapRejectErrorCodeThe value of this object is the enumerated
description of the Error-Code in the most recent SA Map
Reject message sent in response to an SA Map Request for this
IP. It has value unknown(2) if the last Error-Code value
was 0, and none(1) if no SA MAP Reject message has been
received since reboot.ro Enumeration .1.3.6.1.2.1.10.127.6.1.1.3.1.1.9 |
docsBpi2CmIpMulticastSAMapRejectErrorStringThe value of this object is the Display-String in
the most recent SA Map Reject message sent in response to an
SA Map Request for this IP. It is a zero length string if
no SA Map Reject message has been received since reboot.ro SnmpAdminString .1.3.6.1.2.1.10.127.6.1.1.3.1.1.10 |
docsBpi2CmCertObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.1.1.4 |
docsBpi2CmDeviceCertTableThis table describes the Baseline Privacy Plus
device certificates for each CM MAC interface. SEQUENCE OF DocsBpi2CmDeviceCertEntry .1.3.6.1.2.1.10.127.6.1.1.4.1 |
docsBpi2CmDeviceCertEntryEach entry contains the device certificates of
one CM MAC interface. An entry in this table exists for each
ifEntry with an ifType of docsCableMaclayer(127). DocsBpi2CmDeviceCertEntry .1.3.6.1.2.1.10.127.6.1.1.4.1.1 |
docsBpi2CmDeviceCmCertThe X509 DER-encoded cable modem certificate.
Note: This object can be set only when the value is the null
string. Once the object contains the certificate, its access
MUST be read-only.rw X509Certificate -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.1.4.1.1.1 |
docsBpi2CmDeviceManufCertThe X509 DER-encoded manufacturer certificate which
signed the cable modem certificate.ro X509Certificate -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.1.4.1.1.2 |
docsBpi2CmCryptoSuiteTableThis table describes the Baseline Privacy Plus
cryptographic suite capabilites for each CM MAC interface. SEQUENCE OF DocsBpi2CmCryptoSuiteEntry .1.3.6.1.2.1.10.127.6.1.1.5 |
docsBpi2CmCryptoSuiteEntryEach entry contains a cryptographic suite pair
which this CM MAC supports. DocsBpi2CmCryptoSuiteEntry .1.3.6.1.2.1.10.127.6.1.1.5.1 |
docsBpi2CmCryptoSuiteIndexThe index for a cryptographic suite row. INTEGER .1.3.6.1.2.1.10.127.6.1.1.5.1.1 |
docsBpi2CmCryptoSuiteDataEncryptAlgThe value of this object is the data encryption
algorithm for this cryptographic suite capability.ro Enumeration .1.3.6.1.2.1.10.127.6.1.1.5.1.2 |
docsBpi2CmCryptoSuiteDataAuthentAlgThe value of this object is the data authentication
algorithm for this cryptographic suite capability.ro Enumeration .1.3.6.1.2.1.10.127.6.1.1.5.1.3 |
docsBpi2CmtsObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.1.2 |
docsBpi2CmtsBaseTableThis table describes the basic Baseline Privacy
attributes of each CMTS MAC interface. SEQUENCE OF DocsBpi2CmtsBaseEntry .1.3.6.1.2.1.10.127.6.1.2.1 |
docsBpi2CmtsBaseEntryEach entry contains objects describing attributes of
one CMTS MAC interface. An entry in this table exists for
each ifEntry with an ifType of docsCableMaclayer(127). DocsBpi2CmtsBaseEntry .1.3.6.1.2.1.10.127.6.1.2.1.1 |
docsBpi2CmtsDefaultAuthLifetimeThe value of this object is the default lifetime, in
seconds, the CMTS assigns to a new authorization key.rw INTEGER .1.3.6.1.2.1.10.127.6.1.2.1.1.1 |
docsBpi2CmtsDefaultTEKLifetimeThe value of this object is the default lifetime, in
seconds, the CMTS assigns to a new Traffic Encryption Key
(TEK).rw INTEGER .1.3.6.1.2.1.10.127.6.1.2.1.1.2 |
docsBpi2CmtsDefaultSelfSignedManufCertTrustThis object determines the default trust of all (new)
self-signed manufacturer certificates obtained after setting
the object.rw Enumeration .1.3.6.1.2.1.10.127.6.1.2.1.1.3 |
docsBpi2CmtsCheckCertValidityPeriodsSetting this object to TRUE causes all certificates
obtained thereafter to have their validity periods (and their
chain's validity periods) checked against the current time of
day. A FALSE setting will cause all certificates obtained
thereafter to not have their validity periods (nor their
chain's validity periods) checked against the current time of
day.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.2.1.10.127.6.1.2.1.1.4 |
docsBpi2CmtsAuthentInfosThe value of this object is the count of times the
CMTS has received an Authentication Information message from
any CM.ro Counter .1.3.6.1.2.1.10.127.6.1.2.1.1.5 |
docsBpi2CmtsAuthRequestsThe value of this object is the count of times the
CMTS has received an Authorization Request message from any
CM.ro Counter .1.3.6.1.2.1.10.127.6.1.2.1.1.6 |
docsBpi2CmtsAuthRepliesThe value of this object is the count of times the
CMTS has transmitted an Authorization Reply message to any
CM.ro Counter .1.3.6.1.2.1.10.127.6.1.2.1.1.7 |
docsBpi2CmtsAuthRejectsThe value of this object is the count of times the
CMTS has transmitted an Authorization Reject message to any
CM.ro Counter .1.3.6.1.2.1.10.127.6.1.2.1.1.8 |
docsBpi2CmtsAuthInvalidsThe value of this object is the count of times the
CMTS has transmitted an Authorization Invalid message to any
CM.ro Counter .1.3.6.1.2.1.10.127.6.1.2.1.1.9 |
docsBpi2CmtsSAMapRequestsThe value of this object is the count of times the
CMTS has received an SA Map Request message from any CM.ro Counter .1.3.6.1.2.1.10.127.6.1.2.1.1.10 |
docsBpi2CmtsSAMapRepliesThe value of this object is the count of times the
CMTS has transmitted an SA Map Reply message to any CM.ro Counter .1.3.6.1.2.1.10.127.6.1.2.1.1.11 |
docsBpi2CmtsSAMapRejectsThe value of this object is the count of times the
CMTS has transmitted an SA Map Reject message to any CM.ro Counter .1.3.6.1.2.1.10.127.6.1.2.1.1.12 |
docsBpi2CmtsAuthTableThis table describes the attributes of each CM
authorization association. The CMTS maintains one
authorization association with each Baseline Privacy-enabled
CM on each CMTS MAC interface. SEQUENCE OF DocsBpi2CmtsAuthEntry .1.3.6.1.2.1.10.127.6.1.2.2 |
docsBpi2CmtsAuthEntryEach entry contains objects describing attributes of
one authorization association. The CMTS MUST create one entry
per CM per MAC interface, based on the receipt of an
Authorization Request message, and MUST not delete the entry
before the CM authorization permanently expires. DocsBpi2CmtsAuthEntry .1.3.6.1.2.1.10.127.6.1.2.2.1 |
docsBpi2CmtsAuthCmMacAddressThe value of this object is the physical address of
the CM to which the authorization association applies. MacAddress -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.2.1.1 |
docsBpi2CmtsAuthCmBpiVersionThe value of this object is the version of Baseline
Privacy for which this CM has registered.ro Enumeration .1.3.6.1.2.1.10.127.6.1.2.2.1.2 |
docsBpi2CmtsAuthCmPublicKeyThe value of this object is a DER-encoded
RSAPublicKey ASN.1 type string, as defined in the RSA
Encryption Standard (PKCS #1) [10], corresponding to the
public key of the CM. The 74, 106, 140, 204, and 270 byte key
encoding lengths correspond to 512 bit, 768 bit, 1024 bit,
1536 bit, and 2048 public moduli respectively. This is a
zero-length string if the CMTS does not retain the public
key.ro OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.2.1.3 |
docsBpi2CmtsAuthCmKeySequenceNumberThe value of this object is the most recent
authorization key sequence number for this CM.ro INTEGER .1.3.6.1.2.1.10.127.6.1.2.2.1.4 |
docsBpi2CmtsAuthCmExpiresOldThe value of this object is the actual clock time
for expiration of the immediate predecessor of the most
recent authorization key for this FSM. If this FSM has only
one authorization key, then the value is the time of
activation of this FSM.
Note: For CMs running in BPI mode, implementation of this
object is optional and MAY vary.ro DateAndTime -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.2.1.5 |
docsBpi2CmtsAuthCmExpiresNewThe value of this object is the actual clock time
for expiration of the most recent authorization key for this
FSM.ro DateAndTime -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.2.1.6 |
docsBpi2CmtsAuthCmLifetimeThe value of this object is the lifetime, in seconds,
the CMTS assigns to an authorization key for this CM.rw INTEGER .1.3.6.1.2.1.10.127.6.1.2.2.1.7 |
docsBpi2CmtsAuthCmGraceTimeThe value of this object is the grace time for the
authorization key in seconds. The CM is expected to start
trying to get a new authorization key beginning AuthGraceTime
seconds before the authorization key actually expires.
Note: Tracking this value is optional on certain CMTS
implementations.roobsolete INTEGER .1.3.6.1.2.1.10.127.6.1.2.2.1.8 |
docsBpi2CmtsAuthCmResetSetting this object to invalidateAuth(2) causes the
CMTS to invalidate the current CM authorization key(s), but
not to transmit an Authorization Invalid message nor to
invalidate unicast TEKs. Setting this object to
sendAuthInvalid(3) causes the CMTS to invalidate the current
CM authorization key(s), and to transmit an Authorization
Invalid message to the CM, but not to invalidate unicast TEKs.
Setting this object to invalidateTeks(4) causes the CMTS to
invalidate the current CM authorization key(s), to transmit an
Authorization Invalid message to the CM, and to invalidate all
unicast TEKs associated with this CM authorization. Reading
this object returns the most-recently-set value of this
object, or returns noResetRequested(1) if the object has not
been set since the last CMTS reboot.rw Enumeration .1.3.6.1.2.1.10.127.6.1.2.2.1.9 |
docsBpi2CmtsAuthCmInfosThe value of this object is the count of times the
CMTS has received an Authentication Information message from
this CM.ro Counter .1.3.6.1.2.1.10.127.6.1.2.2.1.10 |
docsBpi2CmtsAuthCmRequestsThe value of this object is the count of times the
CMTS has received an Authorization Request message from this
CM.ro Counter .1.3.6.1.2.1.10.127.6.1.2.2.1.11 |
docsBpi2CmtsAuthCmRepliesThe value of this object is the count of times the
CMTS has transmitted an Authorization Reply message to this
CM.ro Counter .1.3.6.1.2.1.10.127.6.1.2.2.1.12 |
docsBpi2CmtsAuthCmRejectsThe value of this object is the count of times the
CMTS has transmitted an Authorization Reject message to this
CM.ro Counter .1.3.6.1.2.1.10.127.6.1.2.2.1.13 |
docsBpi2CmtsAuthCmInvalidsThe value of this object is the count of times the
CMTS has transmitted an Authorization Invalid message to this
CM.ro Counter .1.3.6.1.2.1.10.127.6.1.2.2.1.14 |
docsBpi2CmtsAuthRejectErrorCodeThe value of this object is the enumerated
description of the Error-Code in most recent Authorization
Reject message transmitted to the CM. This has value
unknown(2) if the last Error-Code value was 0, and none(1) if
no Authorization Reject message has been transmitted to the
CM.ro Enumeration .1.3.6.1.2.1.10.127.6.1.2.2.1.15 |
docsBpi2CmtsAuthRejectErrorStringThe value of this object is the Display-String in
most recent Authorization Reject message transmitted to the
CM. This is a zero length string if no Authorization Reject
message has been transmitted to the CM.ro SnmpAdminString .1.3.6.1.2.1.10.127.6.1.2.2.1.16 |
docsBpi2CmtsAuthInvalidErrorCodeThe value of this object is the enumerated
description of the Error-Code in most recent Authorization
Invalid message transmitted to the CM. This has value
unknown(2) if the last Error-Code value was 0, and none(1) if
no Authorization Invalid message has been transmitted to the
CM.ro Enumeration .1.3.6.1.2.1.10.127.6.1.2.2.1.17 |
docsBpi2CmtsAuthInvalidErrorStringThe value of this object is the Display-String in
most recent Authorization Invalid message transmitted to the
CM. This is a zero length string if no Authorization Invalid
message has been transmitted to the CM.ro SnmpAdminString .1.3.6.1.2.1.10.127.6.1.2.2.1.18 |
docsBpi2CmtsAuthPrimarySAIdThe value of this object is the Primary Security
Association identifier.ro INTEGER .1.3.6.1.2.1.10.127.6.1.2.2.1.19 |
docsBpi2CmtsAuthBpkmCmCertValidContains the reason why a CM's certificate is deemed
valid or invalid.
Return unknown if the CM is running BPI mode.
ValidCmChained means the certificate is valid because
it chains to a valid certificate.
ValidCmTrusted means the certificate is valid because
it has been provisioned (in the docsBpi2CmtsProvisionedCmCert
table) to be trusted.
InvalidCmUntrusted means the certificate is invalid
because it has been provisioned (in the
docsBpi2CmtsProvisionedCmCert table) to be untrusted.
InvalidCAUntrusted means the certificate is invalid
because it chains to an untrusted certificate.
InvalidCmOther and InvalidCAOther refer to errors in
parsing, validity periods, etc, which are attributable to the
cm certificate or its chain respectively; additional
information may be found in docsBpi2AuthRejectErrorString for
these types of errors.ro Enumeration .1.3.6.1.2.1.10.127.6.1.2.2.1.20 |
docsBpi2CmtsAuthBpkmCmCertThe X509 CM Certificate sent as part of a BPKM
Authorization Request.
Note: The NULL string must be returned if the entire
certificate is not retained in the CMTS.ro X509Certificate -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.2.1.21 |
docsBpi2CmtsTEKTableThis table describes the attributes of each
Traffic Encryption Key (TEK) association. The CMTS maintains
one TEK association per SAID on each CMTS MAC interface. SEQUENCE OF DocsBpi2CmtsTEKEntry .1.3.6.1.2.1.10.127.6.1.2.3 |
docsBpi2CmtsTEKEntryEach entry contains objects describing attributes of
one TEK association on a particular CMTS MAC interface. The
CMTS MUST create one entry per SAID per MAC interface,
based on the receipt of a Key Request message, and MUST not
delete the entry before the CM authorization for the SAID
permanently expires. DocsBpi2CmtsTEKEntry .1.3.6.1.2.1.10.127.6.1.2.3.1 |
docsBpi2CmtsTEKSAIdThe value of this object is the DOCSIS Security
Association ID (SAID). INTEGER .1.3.6.1.2.1.10.127.6.1.2.3.1.1 |
docsBpi2CmtsTEKSATypeThe value of this object is the type of security
association. Dynamic does not apply to CMs running in
BPI mode.ro Enumeration .1.3.6.1.2.1.10.127.6.1.2.3.1.2 |
docsBpi2CmtsTEKDataEncryptAlgThe value of this object is the data encryption
algorithm being utilized.ro Enumeration .1.3.6.1.2.1.10.127.6.1.2.3.1.3 |
docsBpi2CmtsTEKDataAuthentAlgThe value of this object is the data authentication
algorithm being utilized.ro Enumeration .1.3.6.1.2.1.10.127.6.1.2.3.1.4 |
docsBpi2CmtsTEKLifetimeThe value of this object is the lifetime, in
seconds, the CMTS assigns to keys for this TEK association.rw INTEGER .1.3.6.1.2.1.10.127.6.1.2.3.1.5 |
docsBpi2CmtsTEKGraceTimeThe value of this object is the grace time for
the TEK in seconds. The CM is expected to start trying to
acquire a new TEK beginning TEK GraceTime seconds before
the TEK actually expires.
Note: The value of this object is vendor specific for
multicast TEKs.roobsolete INTEGER .1.3.6.1.2.1.10.127.6.1.2.3.1.6 |
docsBpi2CmtsTEKKeySequenceNumberThe value of this object is the most recent TEK
key sequence number for this SAID.ro INTEGER .1.3.6.1.2.1.10.127.6.1.2.3.1.7 |
docsBpi2CmtsTEKExpiresOldThe value of this object is the actual clock time
for expiration of the immediate predecessor of the most
recent TEK for this FSM. If this FSM has only one TEK, then
the value is the time of activation of this FSM.ro DateAndTime -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.3.1.8 |
docsBpi2CmtsTEKExpiresNewThe value of this object is the actual clock time
for expiration of the most recent TEK for this FSM.ro DateAndTime -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.3.1.9 |
docsBpi2CmtsTEKResetSetting this object to TRUE causes the CMTS to
invalidate the current active TEK(s) (plural due to key
transition periods), and to generate a new TEK for the
associated SAID; the CMTS MAY also generate an unsolicited
TEK Invalid message, to optimize the TEK synchronization
between the CMTS and the CM. Reading this object always
returns FALSE.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.2.1.10.127.6.1.2.3.1.10 |
docsBpi2CmtsKeyRequestsThe value of this object is the count of times the
CMTS has received a Key Request message.ro Counter .1.3.6.1.2.1.10.127.6.1.2.3.1.11 |
docsBpi2CmtsKeyRepliesThe value of this object is the count of times the
CMTS has transmitted a Key Reply message.ro Counter .1.3.6.1.2.1.10.127.6.1.2.3.1.12 |
docsBpi2CmtsKeyRejectsThe value of this object is the count of times the
CMTS has transmitted a Key Reject message.ro Counter .1.3.6.1.2.1.10.127.6.1.2.3.1.13 |
docsBpi2CmtsTEKInvalidsThe value of this object is the count of times the
CMTS has transmitted a TEK Invalid message.ro Counter .1.3.6.1.2.1.10.127.6.1.2.3.1.14 |
docsBpi2CmtsKeyRejectErrorCodeThe value of this object is the enumerated
description of the Error-Code in the most recent Key Reject
message sent in response to a Key Request for this SAID.
This has value unknown(2) if the last Error-Code value
was 0, and none(1) if no Key Reject message has been received
since reboot.ro Enumeration .1.3.6.1.2.1.10.127.6.1.2.3.1.15 |
docsBpi2CmtsKeyRejectErrorStringThe value of this object is the Display-String in
the most recent Key Reject message sent in response to a Key
Request for this SAID. This is a zero length string if no
Key Reject message has been received since reboot.ro SnmpAdminString .1.3.6.1.2.1.10.127.6.1.2.3.1.16 |
docsBpi2CmtsTEKInvalidErrorCodeThe value of this object is the enumerated
description of the Error-Code in the most recent TEK Invalid
message sent in association with this SAID. This has value
unknown(2) if the last Error-Code value was 0, and none(1) if
no TEK Invalid message has been received since reboot.ro Enumeration .1.3.6.1.2.1.10.127.6.1.2.3.1.17 |
docsBpi2CmtsTEKInvalidErrorStringThe value of this object is the Display-String in
the most recent TEK Invalid message sent in association with
this SAID. This is a zero length string if no TEK Invalid
message has been received since reboot.ro SnmpAdminString .1.3.6.1.2.1.10.127.6.1.2.3.1.18 |
docsBpi2CmtsMulticastObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.1.2.4 |
docsBpi2CmtsIpMulticastMapTableThis table maps multicast IP addresses to SAIDs. SEQUENCE OF DocsBpi2CmtsIpMulticastMapEntry .1.3.6.1.2.1.10.127.6.1.2.4.1 |
docsBpi2CmtsIpMulticastMapEntryEach entry contains objects describing the mapping of
a set of multicast IP address and mask to one SAID, as well as
associated message counters and error information. DocsBpi2CmtsIpMulticastMapEntry .1.3.6.1.2.1.10.127.6.1.2.4.1.1 |
docsBpi2CmtsIpMulticastIndexThe index of this row. INTEGER .1.3.6.1.2.1.10.127.6.1.2.4.1.1.1 |
docsBpi2CmtsIpMulticastAddressTypeThe type of internet address for
docsBpi2CmtsIpMulticastAddress.rw InetAddressType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- unknown(0), -- ipv4(1), -- ipv6(2), -- dns(16) -- } .1.3.6.1.2.1.10.127.6.1.2.4.1.1.2 |
docsBpi2CmtsIpMulticastAddressThis object represents the IP multicast address
to be mapped, in conjunction with
docsBpi2CmtsIpMulticastMask.rw InetAddress -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.4.1.1.3 |
docsBpi2CmtsIpMulticastMaskTypeThe type of internet address for
docsBpi2CmtsIpMulticastMask.rw InetAddressType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- unknown(0), -- ipv4(1), -- ipv6(2), -- dns(16) -- } .1.3.6.1.2.1.10.127.6.1.2.4.1.1.4 |
docsBpi2CmtsIpMulticastMaskThis object represents the IP multicast address mask
for this row.
An IP multicast address matches this row if it is
equivalent to the logical AND of
docsBpi2CmtsIpMulticastAddr with
docsBpi2CmtsIpMulticastMask.rw InetAddress -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.4.1.1.5 |
docsBpi2CmtsIpMulticastSAIdThis object represents the multicast SAID to be
used in this IP multicast address mapping entry.rw INTEGER .1.3.6.1.2.1.10.127.6.1.2.4.1.1.6 |
docsBpi2CmtsIpMulticastSATypeThe value of this object is the type of security
association. Dynamic does not apply to CMs running in
BPI mode.rw Enumeration .1.3.6.1.2.1.10.127.6.1.2.4.1.1.7 |
docsBpi2CmtsIpMulticastDataEncryptAlgThe value of this object is the data encryption
algorithm being utilized.rw Enumeration .1.3.6.1.2.1.10.127.6.1.2.4.1.1.8 |
docsBpi2CmtsIpMulticastDataAuthentAlgThe value of this object is the data authentication
algorithm being utilized.rw Enumeration .1.3.6.1.2.1.10.127.6.1.2.4.1.1.9 |
docsBpi2CmtsIpMulticastSAMapRequestsThe value of this object is the count of times the
CMTS has received an SA Map Request message for this IP.ro Counter .1.3.6.1.2.1.10.127.6.1.2.4.1.1.10 |
docsBpi2CmtsIpMulticastSAMapRepliesThe value of this object is the count of times the
CMTS has transmitted an SA Map Reply message for this IP.ro Counter .1.3.6.1.2.1.10.127.6.1.2.4.1.1.11 |
docsBpi2CmtsIpMulticastSAMapRejectsThe value of this object is the count of times the
CMTS has transmitted an SA Map Reject message for this IP.ro Counter .1.3.6.1.2.1.10.127.6.1.2.4.1.1.12 |
docsBpi2CmtsIpMulticastSAMapRejectErrorCodeThe value of this object is the enumerated
description of the Error-Code in the most recent SA Map
Reject message sent in response to a SA Map Request for this
IP. It has value unknown(2) if the last Error-Code value
was 0, and none(1) if no SA MAP Reject message has been
received since reboot.ro Enumeration .1.3.6.1.2.1.10.127.6.1.2.4.1.1.13 |
docsBpi2CmtsIpMulticastSAMapRejectErrorStringThe value of this object is the Display-String in
the most recent SA Map Reject message sent in response to an
SA Map Request for this IP. It is a zero length string if
no SA Map Reject message has been received since reboot.ro SnmpAdminString .1.3.6.1.2.1.10.127.6.1.2.4.1.1.14 |
docsBpi2CmtsIpMulticastMapControlThis object controls and reflects the IP multicast
address mapping entry. There is no restriction on the ability
to change values in this row while the row is active.
Inactive rows need not be timed out.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.2.1.10.127.6.1.2.4.1.1.15 |
docsBpi2CmtsMulticastAuthTableThis table describes the multicast SAID
authorization for each CM on each CMTS MAC interface. SEQUENCE OF DocsBpi2CmtsMulticastAuthEntry .1.3.6.1.2.1.10.127.6.1.2.4.2 |
docsBpi2CmtsMulticastAuthEntryEach entry contains objects describing the key
authorization of one cable modem for one multicast SAID
for one CMTS MAC interface. DocsBpi2CmtsMulticastAuthEntry .1.3.6.1.2.1.10.127.6.1.2.4.2.1 |
docsBpi2CmtsMulticastAuthSAIdThis object represents the multicast SAID for
authorization. INTEGER .1.3.6.1.2.1.10.127.6.1.2.4.2.1.1 |
docsBpi2CmtsMulticastAuthCmMacAddressThis object represents the MAC address of the CM
to which the multicast SAID authorization applies. MacAddress -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.4.2.1.2 |
docsBpi2CmtsMulticastAuthControlThis object controls and reflects the CM
authorization for each multicast SAID. There is no
restriction on the ability to change values in this row
while the row is active. Inactive rows need not be
timed out.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.2.1.10.127.6.1.2.4.2.1.3 |
docsBpi2CmtsCertObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.1.2.5 |
docsBpi2CmtsProvisionedCmCertTableA table of CM certificate trust entries provisioned
to the CMTS. The trust object for a certificate in this table
has an overriding effect on the validity object of a
certificate in the authorization table, as long as the
entire contents of the two certificates are identical. SEQUENCE OF DocsBpi2CmtsProvisionedCmCertEntry .1.3.6.1.2.1.10.127.6.1.2.5.1 |
docsBpi2CmtsProvisionedCmCertEntryAn entry in the CMTS' provisioned CM certificate
table. DocsBpi2CmtsProvisionedCmCertEntry .1.3.6.1.2.1.10.127.6.1.2.5.1.1 |
docsBpi2CmtsProvisionedCmCertMacAddressThe index of this row. MacAddress -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.5.1.1.1 |
docsBpi2CmtsProvisionedCmCertTrustTrust state for the provisioned CM certificate entry.
Note: Setting this object need only override the validity of
CM certificates sent in future authorization requests;
instantaneous effect need not occur.rw Enumeration .1.3.6.1.2.1.10.127.6.1.2.5.1.1.2 |
docsBpi2CmtsProvisionedCmCertSourceThis object indicates how the certificate reached the
CMTS. Other means it originated from a source not identified
above.ro Enumeration .1.3.6.1.2.1.10.127.6.1.2.5.1.1.3 |
docsBpi2CmtsProvisionedCmCertStatusStandard RowStatus object except:
a) if a row has ever been activated,
a set to docsBpi2CmtsProvisionedCmCert need not succeed,
b) inactive rows need not be timed out.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.2.1.10.127.6.1.2.5.1.1.4 |
docsBpi2CmtsProvisionedCmCertAn X509 DER-encoded certificate authority
certificate.
Note: The NULL string must be returned, on reads, if the
entire certificate is not retained in the CMTS.rw X509Certificate -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.5.1.1.5 |
docsBpi2CmtsCACertTableThe table of known certificate authority certificates
acquired by this device. SEQUENCE OF DocsBpi2CmtsCACertEntry .1.3.6.1.2.1.10.127.6.1.2.5.2 |
docsBpi2CmtsCACertEntryA row in the Certificate Authority certificate
table. DocsBpi2CmtsCACertEntry .1.3.6.1.2.1.10.127.6.1.2.5.2.1 |
docsBpi2CmtsCACertIndexThe index for this row. INTEGER .1.3.6.1.2.1.10.127.6.1.2.5.2.1.1 |
docsBpi2CmtsCACertSubjectThe subject name exactly as it is encoded in the
X509 certificate.
The organizationName portion of the certificate's subject
name must be present. All other fields are optional. Any
optional field present must be prepended with CR (carriage
return) LF (line feed) ASCII characters.
Ordering of fields present must conform to:
organizationName
CR LF
countryName
CR LF
stateOrProvinceName
CR LF
localityName
CR LF
organizationalUnitName
CR LF
organizationalUnitName=<Manufacturing Location>
CR LF
commonNamero SnmpAdminString -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.5.2.1.2 |
docsBpi2CmtsCACertIssuerThe issuer name exactly as it is encoded in the
X509 certificate.
The commonName portion of the certificate's issuer
name must be present. All other fields are optional. Any
optional field present must be prepended with CR (carriage
return) LF (line feed) ASCII characters.
Ordering of fields present must conform to:
commonName
CR LF
countryName
CR LF
stateOrProvinceName
CR LF
localityName
CR LF
organizationName
CR LF
organizationalUnitName
CR LF
organizationalUnitName=<Manufacturing Location>ro SnmpAdminString -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.5.2.1.3 |
docsBpi2CmtsCACertSerialNumberThis CA certificate's serial number represented as
an octet string.ro OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.5.2.1.4 |
docsBpi2CmtsCACertTrustThis object controls the trust status of this
certificate. Root certificates must be given root trust;
manufacturer certificates must not be given root trust.
Trust on root certificates must not change.
Note: Setting this object need only affect the validity of
CM certificates sent in future authorization requests;
instantaneous effect need not occur.rw Enumeration .1.3.6.1.2.1.10.127.6.1.2.5.2.1.5 |
docsBpi2CmtsCACertSourceThis object indicates how the certificate reached
the CMTS. Other means it originated from a source not
identified above.ro Enumeration .1.3.6.1.2.1.10.127.6.1.2.5.2.1.6 |
docsBpi2CmtsCACertStatusStandard RowStatus objects except:
a) if a row has ever been activated,
a set to docsBpi2CmtsCACert need not succeed,
b) inactive rows need not be timed out,
c) if a row has ever been activated, a destroy setting need
not succeed.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.2.1.10.127.6.1.2.5.2.1.7 |
docsBpi2CmtsCACertAn X509 DER-encoded certificate authority
certificate.
To help identify certificates, either this object or
docsBpi2CmtsCACertThumbprint must be returned by a CMTS for
self-signed CA certificates.
Note: The NULL string must be returned, on reads, if the
entire certificate is not retained in the CMTS.rw X509Certificate -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.5.2.1.8 |
docsBpi2CmtsCACertThumbprintThe SHA-1 hash of a CA certificate.
To help identify certificates, either this object or
docsBpi2CmtsCACert must be returned by a CMTS for
self-signed CA certificates.
Note: The NULL string must be returned if this object is
not supported by the CMTS.ro OCTET STRING .1.3.6.1.2.1.10.127.6.1.2.5.2.1.9 |
docsBpi2CodeDownloadControl OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.1.4 |
docsBpi2CodeDownloadStatusCodeThe value indicates the result of the latest config
file CVC verification, SNMP CVC verification, or code file
verification.ro Enumeration .1.3.6.1.2.1.10.127.6.1.4.1 |
docsBpi2CodeDownloadStatusStringThe value of this object indicates the additional
information to the status code. The value will include
the error code and error description which will be defined
separately.ro SnmpAdminString -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.4.2 |
docsBpi2CodeMfgOrgNameThe value of this object is the device manufacturer's
organizationName.ro SnmpAdminString -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.4.3 |
docsBpi2CodeMfgCodeAccessStartThe value of this object is the device manufacturer's
current codeAccessStart value referenced to Greenwich Mean
Time (GMT).ro DateAndTime -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.4.4 |
docsBpi2CodeMfgCvcAccessStartThe value of this object is the device manufacturer's
current cvcAccessStart value referenced to Greenwich Mean
Time (GMT).ro DateAndTime -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.4.5 |
docsBpi2CodeCoSignerOrgNameThe value of this object is the Co-Signer's
organizationName. The value is a zero length string if
the co-signer is not specified.ro SnmpAdminString -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.4.6 |
docsBpi2CodeCoSignerCodeAccessStartThe value of this object is the Co-Signer's current
codeAccessStart value referenced to Greenwich Mean
Time (GMT). If docsBpi2CodeCoSignerOrgName is a zero
length string, the value of this object is meaningless.ro DateAndTime -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.4.7 |
docsBpi2CodeCoSignerCvcAccessStartThe value of this object is the Co-Signer's current
cvcAccessStart value referenced to Greenwich Mean
Time (GMT). If docsBpi2CodeCoSignerOrgName is a zero
length string, the value of this object is meaningless.ro DateAndTime -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.4.8 |
docsBpi2CodeCvcUpdateSetting a CVC to this object triggers the device
to verify the CVC and update the cvcAccessStart value.
If the device is not enabled to upgrade codefiles, or
the CVC verification fails, the CVC will be rejected.
Reading this object always returns the null string.rw X509Certificate -- Rsyntax OCTET STRING .1.3.6.1.2.1.10.127.6.1.4.9 |
docsBpi2Notification OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.2 |
docsBpi2Conformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.3 |
docsBpi2Compliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.3.1 |
docsBpi2BasicCompliance OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.3.1.1 |
docsBpi2Groups OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.3.2 |
docsBpi2CmGroup OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.3.2.1 |
docsBpi2CmtsGroup OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.3.2.2 |
docsBpi2CodeDownloadGroup OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.3.2.3 |
docsBpi2ObsoleteObjectsGroup OBJECT IDENTIFIER .1.3.6.1.2.1.10.127.6.3.2.4 |