Home/Catalog/DLINKSW-LACP-EXT-MIB

DLINKSW-LACP-EXT-MIB

AI MIB Summary

The DLINKSW-LACP-EXT-MIB enables monitoring and configuration of proprietary D-Link Link Aggregation Control Protocol (LACP) extensions and non-standard attributes on D-Link switches. This module provides visibility into vendor-specific LACP session states, aggregation group parameters, and operational metrics not defined in standard IEEE 802.3ad MIBs.

The MIB module for managing D-Link LACP extensions which are not covered by standard MIBs.
Main OID:
dlinkSwLacpExtMIB.1.3.6.1.4.1.171.14.4
15
Objects
Active
Status
6
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
SNMPv2-CONF
IF-MIB
Q-BRIDGE-MIB
DLINK-ID-REC-MIB

Objects

15 total
Object Name
dlinkSwLacpExtMIBThe MIB module for managing D-Link LACP extensions which are not covered by standard MIBs.
MODULE-IDENTITY
.1.3.6.1.4.1.171.14.4
dLacpExtMIBNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.171.14.4.0
dLacpExtMIBObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.171.14.4.1
dLacpExtLoadBalanceAlgorithmThis object configures load balance algorithm that the switch uses to distribute packets across ports in the same channel. dstIp(1) - Specify that the switch should examine the destination IP address. dstMac(2) - Specify that the switch should examine the destination MAC address. srcDstIp(3) - Specify that the switch should examine the source and destination IP address. srcDstMac(4) - Specify that the switch should examine the source and destination MAC address. srcIp(5) - Specify that the switch should examine the source IP address. srcMac(6) - Specify that the switch should examine the source MAC address.rw
Enumeration
.1.3.6.1.4.1.171.14.4.1.1
dLacpExtGroupTableThis table consists of a list of channel group information.
SEQUENCE OF DLacpExtGroupEntry
.1.3.6.1.4.1.171.14.4.1.2
dLacpExtGroupEntryAn entry presents a channel group information, which is not covered by standard MIB(s).
DLacpExtGroupEntry
.1.3.6.1.4.1.171.14.4.1.2.1
dLacpExtGroupChannelNoThis object indicates the channel group ID.
Integer32 (1 .. 255)
.1.3.6.1.4.1.171.14.4.1.2.1.1
dLacpExtGroupIfIndexThe ifIndex of the channel group.ro
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.171.14.4.1.2.1.2
dLacpExtGroupTypeThis object indicates the type of channel group.rw
Enumeration
.1.3.6.1.4.1.171.14.4.1.2.1.3
dLacpExtGroupMemberPortsThis object indicates the ports which are grouped into this channel group.rw
PortList (Q-BRIDGE-MIB)
.1.3.6.1.4.1.171.14.4.1.2.1.4
dLacpExtGroupActiveMemberPortsThis object indicates the operational bundled ports in this channel group.ro
PortList (Q-BRIDGE-MIB)
.1.3.6.1.4.1.171.14.4.1.2.1.5
dLacpExtGroupRowStatusThis object indicates the status of this entry.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.171.14.4.1.2.1.6
dLacpExtMIBConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.171.14.4.2
dLacpExtCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.171.14.4.2.1
dLacpExtGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.171.14.4.2.2

More MIBs from D-Link

Browse all D-LinkMIBs →
DGS-1210-28XME-BX

SNMP MIB module

2033 objects→
DGS-1210-12TSME-BX

The DGS-1210-12TSME-BX MIB module provides management capabilities for the D-Link DES-1210-52ME switch, specifically enabling the monitoring and configuration of QinQ (802.1ad) VLAN encapsulation parameters, including inner tag insertion and drop counters for unmatched traffic. This module facilitates precise control over service provider bridging (SPB) operations by exposing metrics related to VLAN tag manipulation and packet discard events on the device's managed ports.

2030 objects→
DGS-1210-28XSME-BX

SNMP MIB module

2016 objects→
DGS-1210-28PME_AX

Standard SNMP MIB module defining data structures for DGS-1210-28PME_AX.

1942 objects→
DGS-1210-28ME_AX

Standard SNMP MIB module defining data structures for DGS-1210-28ME_AX.

1941 objects→
DGS-1210-20ME_AX

Standard SNMP MIB module defining data structures for DGS-1210-20ME_AX.

1941 objects→