DLINKSW-IMPB-MIB
The MIB module defines objects for IP-MAC-Port Binding feature.
Main OID:
dlinkSwImpbMIB.1.3.6.1.4.1.171.14.22
22
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
dlinkSwImpbMIBThe MIB module defines objects for IP-MAC-Port Binding feature. MODULE-IDENTITY .1.3.6.1.4.1.171.14.22 |
dImpbNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.22.0 |
dImpbViolationTrapThe address violation notification is generated when IP-MAC-Port Binding
address violation is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.22.0.1 |
dImpbObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.22.1 |
dImpbNotifyInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.22.1.1 |
dImpbGlobalNotifyEnabledSet to 'true' to enable global SNMP notification
for IP-MAC-Port Binding feature. Setting the object to
'false' will disable SNMP notifications.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.22.1.1.1 |
dImpbViolationIpAddrTypeThis object indicates the type of the violation IP address.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.14.22.1.1.2 |
dImpbViolationIpAddressThis object indicates the IP address of the violation entry.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.171.14.22.1.1.3 |
dImpbIfConfigTableA table provides the mechanism to enable or disable
IP-MAC-Port Binding at each physical interface capable of
this feature.
For IPV4 network, IP-MAC-Port Binding must co-work with
both IPv4 source guard and Dynamic ARP inspection are enabled.
For IPv6 network, IP-MAC-Port Binding must co-work with
both IPv6 source guard and ND inspection. SEQUENCE OF DImpbIfConfigEntry .1.3.6.1.4.1.171.14.22.1.2 |
dImpbIfConfigEntryA row instance contains the configuration to enable
or disable IP-MAC-Port Binding as well as the configuration
of the filter type at each physical interface capable
of IP-MAC-Port Binding feature. DImpbIfConfigEntry .1.3.6.1.4.1.171.14.22.1.2.1 |
dImpbIfBindModeThis object indicates the IP-MAC-Port Binding access control applied
at this interface.
'disable' indicates that IP-MAC-Port Binding feature is disabled.
'strict' indicates performing strict-mode access control.
'loose' indicates to perform loose-mode access control.
For IPv6 network, IP-MAC-Port Binding must operate in strict mode,
otherwise IPv6 source guard and ND inspection cannot be enabled.rw Enumeration .1.3.6.1.4.1.171.14.22.1.2.1.1 |
dImpbViolationLogTableA table provides the information about the violation of IP-MAC-Port Binding. SEQUENCE OF DImpbViolationLogEntry .1.3.6.1.4.1.171.14.22.1.3 |
dImpbViolationLogEntryA row instance contains the blocked entry of IP-MAC-Port Binding. DImpbViolationLogEntry .1.3.6.1.4.1.171.14.22.1.3.1 |
dImpbViolationVlanThis object indicates the VLAN of this entry. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.14.22.1.3.1.1 |
dImpbViolationMacAddressThis object indicates the MAC address of this entry. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.14.22.1.3.1.2 |
dImpbViolationActionThis object is used to remove a specific violation entry when set
to 'clear'.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned.rw Enumeration .1.3.6.1.4.1.171.14.22.1.3.1.99 |
dImpbClearObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.22.1.4 |
dImpbClearAllViolationThis object is used to clear all violations of IP-MAC-Port Binding when set
to 'clear'.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned.rw Enumeration .1.3.6.1.4.1.171.14.22.1.4.1 |
dImpbClearViolationByIfThis object indicates the ifIndex on which all violations will be cleared.
When read, the special value 0 is returned.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.171.14.22.1.4.2 |
dImpbConformance OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.22.2 |
dImpbMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.22.2.1 |
dImpbMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.22.2.2 |
More MIBs from D-Link
Browse all D-LinkMIBs →DGS-1210-28XME-BX
SNMP MIB module
2033 objects→
DGS-1210-12TSME-BX
The DGS-1210-12TSME-BX MIB module provides management capabilities for the D-Link DES-1210-52ME switch, specifically enabling the monitoring and configuration of QinQ (802.1ad) VLAN encapsulation parameters, including inner tag insertion and drop counters for unmatched traffic. This module facilitates precise control over service provider bridging (SPB) operations by exposing metrics related to VLAN tag manipulation and packet discard events on the device's managed ports.
2030 objects→
DGS-1210-28XSME-BX
SNMP MIB module
2016 objects→
DGS-1210-28PME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28PME_AX.
1942 objects→
DGS-1210-28ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28ME_AX.
1941 objects→
DGS-1210-20ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-20ME_AX.
1941 objects→