DLINKSW-ERROR-DISABLE-MIB
AI MIB Summary
The DLINKSW-ERROR-DISABLE-MIB monitors the operational status and trigger conditions of error-disabled ports on D-Link network switches, tracking specific interface states where the device has automatically shut down ports due to detected security violations or protocol errors.
This MIB module defines objects for error disabled.
Main OID:
dlinkSwErrDisableMIB.1.3.6.1.4.1.171.14.45
28
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
dlinkSwErrDisableMIBThis MIB module defines objects for error disabled. MODULE-IDENTITY .1.3.6.1.4.1.171.14.45 |
dErrDisableMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.45.0 |
dErrDisNotifyPortDisabledAssertThe trap is sent when a port enters into error disabled state. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.45.0.1 |
dErrDisNotifyPortDisabledClearThe trap is sent when a port loop restarts after the interval time. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.45.0.2 |
dErrDisNotifyVlanDisabledAssertThe trap is sent when a Port with a VID loop occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.45.0.3 |
dErrDisNotifyVlanDisabledClearThe trap is sent when a Port with a VID restarts after the interval time. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.45.0.4 |
dErrDisableMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.45.1 |
dErrDisRecoveryTableThis table contains the recovery mechanism for the features with
error-disable functionality.
Transceiver monitoring module (the DErrDisReasonID is 'ddm') can also
put a SFP port which is in abnormal status in error disabled state.
This error disable cannot be auto recovered but can only be manually
recovered. As a result, there is no entry for error cause is 'ddm'
in this table. SEQUENCE OF DErrDisRecoveryEntry .1.3.6.1.4.1.171.14.45.1.1 |
dErrDisRecoveryEntryAn entry is created for each feature which has error-disable
functionality. DErrDisRecoveryEntry .1.3.6.1.4.1.171.14.45.1.1.1 |
dErrDisRecoveryIndexThis object indicates the cause of error-disable. DErrDisReasonID .1.3.6.1.4.1.171.14.45.1.1.1.1 |
dErrDisRecoveryEnableThis object specifies whether the system can
automatically recover a system entity that has been
disabled by the cause.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.45.1.1.1.2 |
dErrDisRecoveryIntervalSpecifies the error-recovery time interval on specific cause
to recover the port/interface from the error disabled situation.rw Integer32 .1.3.6.1.4.1.171.14.45.1.1.1.3 |
dErrDisIfStatusTableNumIndicates the number of entries present in the dErrDisIfStatusTable.ro Unsigned32 .1.3.6.1.4.1.171.14.45.1.2 |
dErrDisIfStatusTableThis table provides next recovery timeout information about an interface
disabled by a feature. SEQUENCE OF DErrDisIfStatusEntry .1.3.6.1.4.1.171.14.45.1.3 |
dErrDisIfStatusEntryAn entry indicates next recovery timeout information about an interface
or (interface, vlan) disabled by a feature. DErrDisIfStatusEntry .1.3.6.1.4.1.171.14.45.1.3.1 |
dErrDisIfStatusIfIndexThis object is the interface index of the interface disabled by a feature. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.14.45.1.3.1.1 |
dErrDisIfStatusVlanIndexThis object indicates the VLAN in the given interface
that has been error-disabled. If the physical interface is
error-disabled then the value of this object is 0. VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.14.45.1.3.1.2 |
dErrDisIfStatusDisReasonIndexThis object indicates the reason which cause the interface disabled. DErrDisReasonID .1.3.6.1.4.1.171.14.45.1.3.1.3 |
dErrDisIfStatusTimeLeftThis object indicates the time left that the interface will be
automatically recovered. Value 0xFFFFFFFF indicates the interface
won't be automatically recovered.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.171.14.45.1.3.1.4 |
dErrDisNotificationEnableThis object indicates whether a specified notification is enabled or not.
If a bit corresponding to a notification is set to 1, then
the specified notification can be generated.
errDisableAsserted(0) - Controls the notifications for a port/vlan
entering into error disabled state.
errDisableCleared(1) - Controls the notifications for a port/vlan
exiting from error disabled state.rw Bits .1.3.6.1.4.1.171.14.45.1.4 |
dErrDisNotifRateExpressed in the number of notifications can be generated
per minute.
This object configures the rate-limit of SNMP Notification for
errDisable feature.
A value of 0 indicates that an SNMP Notification is generated
for every error disabled event.rw Unsigned32 .1.3.6.1.4.1.171.14.45.1.5 |
dErrDisNotifyInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.45.1.6 |
dErrDisNotifyInfoPortIfIndexThis object indicates the port number of error disabled port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.14.45.1.6.1 |
dErrDisNotifyInfoLoopDetectedVIDThis object indicates the VLAN ID that has detected a loopback.ro VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.14.45.1.6.2 |
dErrDisNotifyInfoReasonIDThis object indicates the condition which cause a port/vlan enter
into error disabled state.ro DErrDisReasonID .1.3.6.1.4.1.171.14.45.1.6.3 |
dErrDisableMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.45.2 |
dErrDisMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.45.2.1 |
dErrDisMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.45.2.2 |