DLINKSW-ERPS-MIB
The MIB module for managing Ethernet Ring Protection Switching.
Main OID:
dlinkSwErpsMIB.1.3.6.1.4.1.171.14.78
53
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
53 total| Object Name |
|---|
dlinkSwErpsMIBThe MIB module for managing Ethernet Ring Protection Switching. MODULE-IDENTITY .1.3.6.1.4.1.171.14.78 |
SNMPv2-TCThe MIB module for managing Ethernet Ring Protection Switching. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.78 |
dErpsMIBNotification OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.78.0 |
dErpsFailuredetectedNotifA dErpsFailureNotification is sent when dErpsNotificationEnabled
is 'true' and a signal failure is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.78.0.1 |
dErpsFailureClearedNotifA dErpsFailureClearedNotif is sent when dErpsNotificationEnabled
is 'true' and a signal failure is cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.78.0.2 |
dErpsRPLOwnerConflictNotifA dErpsOwnerConflictNotif is sent when dErpsNotificationEnabled
is 'true' and RPL owner conflict is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.78.0.3 |
dErpsMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.78.1 |
dErpsGenCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.78.1.1 |
dErpsNotificationEnabledThis object indicates whether sending notification for ERPS
state change or RPL owner conflict event.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.78.1.1.3 |
dErpsProfileTableThis table contains a list of G8032 profiles. SEQUENCE OF DErpsProfileEntry .1.3.6.1.4.1.171.14.78.1.2 |
dErpsProfileEntryAn entry contains information about a G8032 profile.
An entry is created/removed when a G8032 profile is defined
or deleted. DErpsProfileEntry .1.3.6.1.4.1.171.14.78.1.2.1 |
dErpsProfNameThis object indicates the name of the G8032 profile. DisplayString .1.3.6.1.4.1.171.14.78.1.2.1.1 |
dErpsProfRowStatusThe status of the conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.14.78.1.2.1.2 |
dErpsProfTcnPropagationEnabledThis object indicates whether the propagation of topology change
notification from sub ERP instance to major instance is enabled or
not for the G8032 profile.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.78.1.2.1.3 |
dErpsProfRevertiveEnabledThis object indicates whether restoring to the working transport entity,
i.e. blocked on the RPL of the entry.
In non-revertive operation, the traffic channel continues to use the RPL,
if it is not failed, after a switch link defect condition has cleared.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.78.1.2.1.4 |
dErpsProfGuardTimerThis object configures the guard timer in milliseconds for an ERP domain.
The valid range is 10 to 2000. The value should be multiple of 10.rw Unsigned32 ( 10..2000 ) UNITS "milliseconds" .1.3.6.1.4.1.171.14.78.1.2.1.5 |
dErpsProfHoldOffTimerThis object configures the hold-off timer in seconds for an ERP domain.
The valid range is 0 to 10.rw Unsigned32 ( 0..10 ) UNITS "seconds" .1.3.6.1.4.1.171.14.78.1.2.1.6 |
dErpsProfWtrTimerThis object configures the WTR timer in minutes for an ERP domain.
The valid range is 1 to 12.rw Unsigned32 ( 1..12 ) UNITS "minutes" .1.3.6.1.4.1.171.14.78.1.2.1.7 |
dErpsEtherRingTableThis table contains configuration of the G8032 physical rings. SEQUENCE OF DErpsEtherRingEntry .1.3.6.1.4.1.171.14.78.1.3 |
dErpsEtherRingEntryAn entry contains G8032 physical ring inforamtion.
An entry is created/removed when a G8032 physical ring is defined
or deleted. DErpsEtherRingEntry .1.3.6.1.4.1.171.14.78.1.3.1 |
dErpsEtherRingNameThis object indicates the name of the G8032 ring. DisplayString .1.3.6.1.4.1.171.14.78.1.3.1.1 |
dErpsEtherRingRowStatusThe status of the conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.14.78.1.3.1.2 |
dErpsEtherRingAdminPort0IfIdxThis object indicates the ifIndex of the interface which is the
configured first ring port of the physical ring.
The interface can be physical port or port-channel interface.
The special value of zero indicates the first ring port is not
specified.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.171.14.78.1.3.1.3 |
dErpsEtherRingAdminPort1IfIdxThis object indicates the ifIndex of the interface which is the
configured second ring port of the physical ring.
The interface can be physical port or port-channel interface.
Setting this object to 0xFFFFFFFF(4294967295) indicates that the
interconnect node is a local node endpoint of an open ring.
The special value of zero indicates the second ring port is not
specified.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.171.14.78.1.3.1.4 |
dErpsEtherSubRingTableThis table contains sub ring configuration of the G8032 physical rings. SEQUENCE OF DErpsEtherSubRingEntry .1.3.6.1.4.1.171.14.78.1.4 |
dErpsEtherSubRingEntryAn entry contains a sub ring setting of a physical ring.
An entry is created/removed when a sub ring is specified or removed. DErpsEtherSubRingEntry .1.3.6.1.4.1.171.14.78.1.4.1 |
dErpsEtherSubRingNameThis object indicates the name of the sub ring. DisplayString .1.3.6.1.4.1.171.14.78.1.4.1.1 |
dErpsEtherSubRingRowStatusThe status of the conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.14.78.1.4.1.2 |
dErpsInstTableThis table contains a list of ERP instance configuration and
status information. SEQUENCE OF DErpsInstEntry .1.3.6.1.4.1.171.14.78.1.5 |
dErpsInstEntryAn entry contains information about an ERP instance.
The first instance identifier index value (dErpsEtherRingName)
identifies the dErpsEtherRingEntry that an ERP instance (dErpsInstEntry)
belongs to. An entry is removed from this table when its
corresponding dErpsEtherRingEntry is deleted.
An entry is created/removed when an ERP instance is defined
or deleted. DErpsInstEntry .1.3.6.1.4.1.171.14.78.1.5.1 |
dErpsInstInstanceIdThis object indicates the name of the ERP instance. Unsigned32 .1.3.6.1.4.1.171.14.78.1.5.1.1 |
dErpsInstRowStatusThe status of the conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.14.78.1.5.1.2 |
dErpsInstDescriptionThis object indicates a description for the ERP instance.
A zero length string indicates the description is not specified.rw DisplayString .1.3.6.1.4.1.171.14.78.1.5.1.3 |
dErpsInstMelThis object indicates the ring MEL value of the ERP instance.rw Unsigned32 .1.3.6.1.4.1.171.14.78.1.5.1.4 |
dErpsInstProfileThis object indicates the name of the G8032 profile to be
associated with the ERP instance.
A zero length string indicates the associated profile is
not specified.rw DisplayString .1.3.6.1.4.1.171.14.78.1.5.1.5 |
dErpsInstApsChannelVlanIdThis object indicates the APS channel VLAN for the ERP instance.
A special value of 0 indicates the APS channel VLAN is not
specified.rw VlanIdOrNone (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.14.78.1.5.1.6 |
dErpsInstIncludeVlansFirst2KThis object specifies the service protected VLANs of ERP instance
in a string of octets containing one bit per VLAN for VLANs 1 to
2048.
If the bit is set to '1', then the VLAN is configured to be
protected by the Ethernet ring protection mechanism.rw Dlink2kVlanList (DLINKSW-TC-MIB) .1.3.6.1.4.1.171.14.78.1.5.1.7 |
dErpsInstIncludeVlansSecond2KThis object specifies the service protected VLANs of ERP instance
in a string of octets containing one bit per VLAN for VLANs 2049 to
4094.
If the bit is set to '1', then the VLAN is configured to be
protected by the Ethernet ring protection mechanism.rw Dlink2kVlanList (DLINKSW-TC-MIB) .1.3.6.1.4.1.171.14.78.1.5.1.8 |
dErpsInstAdminRplPortThis object indicates the administratively configured RPL port of
the entry.
port0(0) - Specify port0 as the RPL port.
port1(1) - Specify port1 as the RPL port.
none(2) - The RPL port is not specified.rw Enumeration .1.3.6.1.4.1.171.14.78.1.5.1.9 |
dErpsInstOperRplPortThis object indicates the operational RPL port of the entry.ro Enumeration .1.3.6.1.4.1.171.14.78.1.5.1.10 |
dErpsInstAdminRplNodeRoleThis object indicates the administratively configured node role.
This object has to be none(0) if administrative RPL port is
not specified.rw Enumeration .1.3.6.1.4.1.171.14.78.1.5.1.11 |
dErpsInstOperRplNodeRoleThis object indicates the current ring node role.ro Enumeration .1.3.6.1.4.1.171.14.78.1.5.1.12 |
dErpsInstOperPort0IfIdxThis object indicates the ifIndex of the operational first ring
port of the physical ring.
The value of administrative port0 inherits dErpsEtherRingAdminPort0IfIdx
of physical ring to which the instance belongs.
The special value of zero indicates the operational port0 is not
available.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.171.14.78.1.5.1.13 |
dErpsInstOperPort0StateThis object indicates the operational state of port0.ro Enumeration .1.3.6.1.4.1.171.14.78.1.5.1.14 |
dErpsInstOperPort1IfIdxThis object indicates the ifIndex of the operational second ring
port of the physical ring.
The value of administrative port1 inherits dErpsEtherRingAdminPort1IfIdx
of physical ring to which the instance belongs.
The special value of zero indicates the operational port1 is not
available.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.171.14.78.1.5.1.15 |
dErpsInstOperPort1StateThis object indicates the operational state of port1.ro Enumeration .1.3.6.1.4.1.171.14.78.1.5.1.16 |
dErpsInstAdminActivateThis object indicates the administrative state of the ERP instance.
Setting this object to 'true' activates the ERP instance.
Setting this object to 'false' deactivates the ERP instance.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.78.1.5.1.17 |
dErpsInstInstanceStateThis object indicates the current ring node state of the ERP instance.
The state could be:
deactivated(0) : The ERP instance is deactivated.
nonOperational(1) : The ERP instance is enabled but is not activated
due to inconsistent setting.
init(2) : The instance is initializing.
idle(3) : The instance is in normal state. The RPL port
is blocked.
protection(4) : The instance detects failure at some ring port.
The RPL port is restored to protect the port.ro Enumeration .1.3.6.1.4.1.171.14.78.1.5.1.18 |
dErpsEventInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.78.1.6 |
dErpsEventNodeIdThe MAC address included in the notification currently being
sent, indicating the ring node that is involved the ERPS event.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.14.78.1.6.1 |
dErpsMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.78.2 |
dErpsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.78.2.1 |
dErpsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.78.2.2 |