DLINKSW-DOT1X-EXT-MIB
AI MIB Summary
The DLINKSW-DOT1X-EXT-MIB extends IEEE 802.1X port-based authentication monitoring on D-Link switches by exposing proprietary objects and state variables not defined in the standard IEEE8021-PAE-MIB. This module enables granular visibility into non-standard 802.1X session parameters, authentication failures, and vendor-specific extension states for D-Link network access control enforcement.
This MIB module defines objects for managing IEEE 802.1X extensions which cannot be covered by standard MIB (IEEE8021-PAE-MIB).
Main OID:
dlinkSwDot1xExtMIB.1.3.6.1.4.1.171.14.30
72
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
72 total| Object Name |
|---|
dlinkSwDot1xExtMIBThis MIB module defines objects for managing IEEE 802.1X
extensions which cannot be covered by standard MIB
(IEEE8021-PAE-MIB). MODULE-IDENTITY .1.3.6.1.4.1.171.14.30 |
dDot1xExtMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.30.0 |
dDot1xExtLoggedSuccessThe trap is sent when a host has successfully logged in (passed
802.1X authentication). NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.30.0.1 |
dDot1xExtLoggedFailThe trap is sent when a host failed to pass 802.1X authenitcation
(login failed). NOTIFICATION-TYPE .1.3.6.1.4.1.171.14.30.0.2 |
dDot1xExtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.30.1 |
dDot1xExtGenCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.30.1.1 |
dDot1xExtClearCounterByIfThis object indicates the ifIndex of the interface on which
802.1X authentication and session statistics will be cleared.
When read, a value of 0 is returned.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.171.14.30.1.1.1 |
dDot1xExtInitByMacAddrThis object specifies a MAC address which will be initialized.
When read, a value of '000000000000'H is returned.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.14.30.1.1.2 |
dDot1xExtReAuthByMacAddrThis object specifies a MAC address which will be re-authenticated.
When read, a value of '000000000000'H is returned.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.14.30.1.1.3 |
dDot1xExtNotifEnabledSetting to 'true' to enable global SNMP notification for 802.1X
authentication feature.
Setting the object to 'false' will disable SNMP notifications.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.30.1.1.4 |
dDot1xExtPortMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.30.1.2 |
dDot1xExtPaePortTableA table contains a list of port-specific information for the 802.1X
extensions. SEQUENCE OF DDot1xExtPaePortEntry .1.3.6.1.4.1.171.14.30.1.2.1 |
dDot1xExtPaePortEntryAn entry in dDot1xExtPaePortTable indicates per port
802.1X extensions information which is not covered by
IEEE8021-PAE-MIB. DDot1xExtPaePortEntry .1.3.6.1.4.1.171.14.30.1.2.1.1 |
dDot1xExtPaePortNumberThis object indicates the ifIndex of the port. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.14.30.1.2.1.1.1 |
dDot1xExtPaePortEnabledThis object is used to enable/disable IEEE 802.1X port access entity (PAE)
authenticator.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.30.1.2.1.1.2 |
dDot1xExtPaePortForwardPduThis object is used to enable/disable forwarding of IEEE 802.1X PDU.
'true' indicates the forwarding of 802.1X PDU is enabled.
'false' indicates the forwarding of 802.1X PDU is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.14.30.1.2.1.1.3 |
dDot1xExtAuthStatsTableA table that contains the statistics objects for the
Authenticator PAE associated with each Port/MAC/VLAN (for multi-auth
mode). SEQUENCE OF DDot1xExtAuthStatsEntry .1.3.6.1.4.1.171.14.30.1.3 |
dDot1xExtAuthStatsEntryThe statistics information for an Authenticator PAE, including
multi-auth mode. DDot1xExtAuthStatsEntry .1.3.6.1.4.1.171.14.30.1.3.1 |
dDot1xExtAuthStatsMacAddrThis object indicates the MAC address of the entry. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.14.30.1.3.1.1 |
dDot1xExtAuthStatsVlanIdThis object indicates the VLAN ID of the entry. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.14.30.1.3.1.2 |
dDot1xExtAuthEapolFramesRxThe number of valid EAPOL frames of any type
that have been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.14.30.1.3.1.3 |
dDot1xExtAuthEapolFramesTxThe number of EAPOL frames of any type
that have been transmitted by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.14.30.1.3.1.4 |
dDot1xExtAuthEapolStartFramesRxThe number of EAPOL Start frames that have
been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.14.30.1.3.1.5 |
dDot1xExtAuthEapolLogoffFramesRxThe number of EAPOL Logoff frames that have
been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.14.30.1.3.1.6 |
dDot1xExtAuthEapolRespIdFramesRxThe number of EAP Resp/Id frames that have
been received by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.14.30.1.3.1.7 |
dDot1xExtAuthEapolRespFramesRxThe number of valid EAP Response frames
(other than Resp/Id frames) that have been
received by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.14.30.1.3.1.8 |
dDot1xExtAuthEapolReqIdFramesTxThe number of EAP Req/Id frames that have been
transmitted by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.14.30.1.3.1.9 |
dDot1xExtAuthEapolReqFramesTxThe number of EAP Request frames
(other than Rq/Id frames) that have been
transmitted by this Authenticator.ro Counter32 .1.3.6.1.4.1.171.14.30.1.3.1.10 |
dDot1xExtAuthInvalidEapolFramesRxThe number of EAPOL frames that have been
received by this Authenticator in which the
frame type is not recognized.ro Counter32 .1.3.6.1.4.1.171.14.30.1.3.1.11 |
dDot1xExtAuthEapLengthErrorFramesRxThe number of EAPOL frames that have been received
by this Authenticator in which the Packet Body
Length field is invalid.ro Counter32 .1.3.6.1.4.1.171.14.30.1.3.1.12 |
dDot1xExtAuthLastEapolFrameVersionThe protocol version number carried in the
most recently received EAPOL frame.ro Unsigned32 .1.3.6.1.4.1.171.14.30.1.3.1.13 |
dDot1xExtAuthLastEapolFrameSourceThe source MAC address carried in the
most recently received EAPOL frame.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.14.30.1.3.1.14 |
dDot1xExtAuthDiagTableA table that contains the diagnostics objects for the
Authenticator PAE associated with each Port/MAC/VLAN (for multi-auth
mode). SEQUENCE OF DDot1xExtAuthDiagEntry .1.3.6.1.4.1.171.14.30.1.4 |
dDot1xExtAuthDiagEntryThe statistics information for an Authenticator PAE, including
multi-auth mode. DDot1xExtAuthDiagEntry .1.3.6.1.4.1.171.14.30.1.4.1 |
dDot1xExtAuthDiagMacAddrThis object indicates the MAC address of the entry. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.14.30.1.4.1.1 |
dDot1xExtAuthDiagVlanIdThis object indicates the VLAN ID of the entry. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.14.30.1.4.1.2 |
dDot1xExtAuthEntersConnectingCounts the number of times that the state machine
transitions to the CONNECTING state from any other
state.ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.3 |
dDot1xExtAuthEapLogoffsWhileConnectingCounts the number of times that the state machine
transitions from CONNECTING to DISCONNECTED as a result
of receiving an EAPOL-Logoff message.ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.4 |
dDot1xExtAuthEntersAuthenticatingCounts the number of times that the state machine
transitions from CONNECTING to AUTHENTICATING, as a
result of an EAP-Response/Identity message being
received from the Supplicant.ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.5 |
dDot1xExtAuthAuthSuccessWhileAuthenticatingCounts the number of times that the state machine
transitions from AUTHENTICATING to AUTHENTICATED, as a
result of the Backend Authentication state machine
indicating successful authentication of the Supplicant
(authSuccess = TRUE).ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.6 |
dDot1xExtAuthAuthTimeoutsWhileAuthenticatingCounts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of the Backend Authentication state machine indicating
authentication timeout (authTimeout = TRUE).ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.7 |
dDot1xExtAuthAuthFailWhileAuthenticatingCounts the number of times that the state machine
transitions from AUTHENTICATING to HELD, as a result
of the Backend Authentication state machine indicating
authentication failure (authFail = TRUE).ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.8 |
dDot1xExtAuthAuthReauthsWhileAuthenticatingCounts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of a reauthentication request (reAuthenticate = TRUE).ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.9 |
dDot1xExtAuthAuthEapStartsWhileAuthenticatingCounts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of an EAPOL-Start message being received
from the Supplicant.ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.10 |
dDot1xExtAuthAuthEapLogoffWhileAuthenticatingCounts the number of times that the state machine
transitions from AUTHENTICATING to ABORTING, as a result
of an EAPOL-Logoff message being received
from the Supplicant.ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.11 |
dDot1xExtAuthAuthReauthsWhileAuthenticatedCounts the number of times that the state machine
transitions from AUTHENTICATED to CONNECTING, as a
result of a reauthentication request
(reAuthenticate = TRUE).ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.12 |
dDot1xExtAuthAuthEapStartsWhileAuthenticatedCounts the number of times that the state machine
transitions from AUTHENTICATED to CONNECTING, as a
result of an EAPOL-Start message being received from the
Supplicant.ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.13 |
dDot1xExtAuthAuthEapLogoffWhileAuthenticatedCounts the number of times that the state machine
transitions from AUTHENTICATED to DISCONNECTED, as a
result of an EAPOL-Logoff message being received from
the Supplicant.ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.14 |
dDot1xExtAuthBackendResponsesCounts the number of times that the state machine sends
an initial Access-Request packet to the Authentication
server (i.e., executes sendRespToServer on entry to the
RESPONSE state). Indicates that the Authenticator
attempted communication with the Authentication Server.ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.15 |
dDot1xExtAuthBackendAccessChallengesCounts the number of times that the state machine
receives an initial Access-Challenge packet from the
Authentication server (i.e., aReq becomes TRUE,
causing exit from the RESPONSE state). Indicates that
the Authentication Server has communication with
the Authenticator.ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.16 |
dDot1xExtAuthBackendOtherRequestsToSupplicantCounts the number of times that the state machine
sends an EAP-Request packet (other than an Identity,
Notification, Failure or Success message) to the
Supplicant (i.e., executes txReq on entry to the
REQUEST state). Indicates that the Authenticator chose
an EAP-method.ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.17 |
dDot1xExtAuthBackendNonNakResponsesFromSupplicantCounts the number of times that the state machine
receives a response from the Supplicant to an initial
EAP-Request, and the response is something other than
EAP-NAK (i.e., rxResp becomes TRUE, causing the state
machine to transition from REQUEST to RESPONSE,
and the response is not an EAP-NAK). Indicates that
the Supplicant can respond to the Authenticator's
chosen EAP-method.ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.18 |
dDot1xExtAuthBackendAuthSuccessesCounts the number of times that the state machine
receives an EAP-Success message from the Authentication
Server (i.e., aSuccess becomes TRUE, causing a
transition from RESPONSE to SUCCESS). Indicates that
the Supplicant has successfully authenticated to
the Authentication Server.ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.19 |
dDot1xExtAuthBackendAuthFailsCounts the number of times that the state machine
receives an EAP-Failure message from the Authentication
Server (i.e., aFail becomes TRUE, causing a transition
from RESPONSE to FAIL). Indicates that the Supplicant
has not authenticated to the Authentication Server.ro Counter32 .1.3.6.1.4.1.171.14.30.1.4.1.20 |
dDot1xExtAuthSessionStatsTableA table that contains the diagnostics objects for the
Authenticator PAE associated with each Port/MAC/VLAN (for multi-auth
mode). SEQUENCE OF DDot1xExtAuthSessionStatsEntry .1.3.6.1.4.1.171.14.30.1.5 |
dDot1xExtAuthSessionStatsEntryThe statistics information for an Authenticator PAE, including
multi-auth mode. DDot1xExtAuthSessionStatsEntry .1.3.6.1.4.1.171.14.30.1.5.1 |
dDot1xExtAuthSessionMacAddrThis object indicates the MAC address of the entry. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.171.14.30.1.5.1.1 |
dDot1xExtAuthSessionVlanIdThis object indicates the VLAN ID of the entry. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.171.14.30.1.5.1.2 |
dDot1xExtAuthSessionOctetsRxThe number of octets received in user data
frames on this Port during the session.ro Counter64 .1.3.6.1.4.1.171.14.30.1.5.1.3 |
dDot1xExtAuthSessionOctetsTxThe number of octets transmitted in user data
frames on this Port during the session.ro Counter64 .1.3.6.1.4.1.171.14.30.1.5.1.4 |
dDot1xExtAuthSessionFramesRxThe number of user data frames received
on this Port during the session.ro Counter32 .1.3.6.1.4.1.171.14.30.1.5.1.5 |
dDot1xExtAuthSessionFramesTxThe number of user data frames transmitted
on this Port during the session.ro Counter32 .1.3.6.1.4.1.171.14.30.1.5.1.6 |
dDot1xExtAuthSessionIdA unique identifier for the session, in the
form of a printable ASCII string of at least
three characters.ro SnmpAdminString .1.3.6.1.4.1.171.14.30.1.5.1.7 |
dDot1xExtAuthSessionAuthenticMethodThe authentication method used to establish the
session.ro Enumeration .1.3.6.1.4.1.171.14.30.1.5.1.8 |
dDot1xExtAuthSessionTimeThe duration of the session in seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.14.30.1.5.1.9 |
dDot1xExtAuthSessionTerminateCauseThe reason for the session termination.ro Enumeration .1.3.6.1.4.1.171.14.30.1.5.1.10 |
dDot1xExtAuthSessionUserNameThe User-Name representing the identity of the
Supplicant PAE.ro SnmpAdminString .1.3.6.1.4.1.171.14.30.1.5.1.11 |
dDot1xExtNotifyInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.30.1.6 |
dDot1xExtNotifyFailReasonThe reason for failed authentication.ro DisplayString .1.3.6.1.4.1.171.14.30.1.6.1 |
dDot1xExtMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.30.2 |
dDot1xExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.30.2.1 |
dDot1xExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.171.14.30.2.2 |
More MIBs from D-Link
Browse all D-LinkMIBs →DGS-1210-28XME-BX
SNMP MIB module
2033 objects→
DGS-1210-12TSME-BX
The DGS-1210-12TSME-BX MIB module provides management capabilities for the D-Link DES-1210-52ME switch, specifically enabling the monitoring and configuration of QinQ (802.1ad) VLAN encapsulation parameters, including inner tag insertion and drop counters for unmatched traffic. This module facilitates precise control over service provider bridging (SPB) operations by exposing metrics related to VLAN tag manipulation and packet discard events on the device's managed ports.
2030 objects→
DGS-1210-28XSME-BX
SNMP MIB module
2016 objects→
DGS-1210-28PME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28PME_AX.
1942 objects→
DGS-1210-28ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-28ME_AX.
1941 objects→
DGS-1210-20ME_AX
Standard SNMP MIB module defining data structures for DGS-1210-20ME_AX.
1941 objects→