DLINKPRIME-SURVEILLANCE-VLAN-MIB
The DLINKPRIME-SURVEILLANCE-VLAN-MIB enables SNMP-based configuration and monitoring of dedicated VLAN interfaces on D-Link Prime surveillance network devices, specifically managing parameters such as VLAN IDs, port assignments, and traffic isolation settings required for securing camera and recording system data streams.
Imported Objects
Objects
29 total| Object Name |
|---|
dlinkPrimeSurveillanceVlanMIBThe MIB module for managing surveillance VLAN feature. MODULE-IDENTITY .dlinkPrimeCommon.19 |
dpsvMIBNotifications OBJECT IDENTIFIER .dlinkPrimeCommon.19.0 |
dpsvMIBObjects OBJECT IDENTIFIER .dlinkPrimeCommon.19.1 |
dpsvGlobal OBJECT IDENTIFIER .dlinkPrimeCommon.19.1.1 |
dpsvEnabledThis object enables or disables surveillance VLAN feature.rw TruthValue (SNMPv2-TC) .dlinkPrimeCommon.19.1.1.1 |
dpsvVlanIdThe object specifies the surveillance VLAN on a switch.
A value of zero indicates that no surveillance VLAN has been
configured.
It is required to configure the global dpsvVlanId and enable
dpsvEnabled to start the surveillance VLAN function.rw VlanIdOrNone (Q-BRIDGE-MIB) .dlinkPrimeCommon.19.1.1.2 |
dpsvQosThe priority for the surveillance VLAN, which is used to distinguish
the QoS of the surveillance traffic from data traffic.rw Unsigned32 .dlinkPrimeCommon.19.1.1.3 |
dpsvAgingTimeThe aging time for the surveillance VLAN, for aging out the surveillance
device and the surveillance VLAN automatically learned member ports.rw Unsigned32 .dlinkPrimeCommon.19.1.1.4 |
dpsvOuiTableThis table contains a list of the surveillance VLAN OUI configuration. SEQUENCE OF DpsvOuiEntry .dlinkPrimeCommon.19.1.1.5 |
dpsvOuiEntryAn entry indicates an OUI information, which is used to classify
surveillance traffic into the surveillance VLAN. If the source MAC addresses of
the received packet matches any of the OUI pattern, the received
packet is determined as surveillance packet. DpsvOuiEntry .dlinkPrimeCommon.19.1.1.5.1 |
dpsvOuiAddrThe MAC address of the OUI referring to this entry. MacAddress (SNMPv2-TC) .dlinkPrimeCommon.19.1.1.5.1.1 |
dpsvOuiMaskIndicates the OUI MAC address matching bitmask. MacAddress (SNMPv2-TC) .dlinkPrimeCommon.19.1.1.5.1.2 |
dpsvOuiComponentTypeThe Component type of the OUI.
Note: The component type 'dlink' is not allowed to set.rw OuiComponentType .dlinkPrimeCommon.19.1.1.5.1.3 |
dpsvOuiDescriptionThe description of the OUI. A zero length string of this object indicates
there is no description for this OUI.rw SnmpAdminString .dlinkPrimeCommon.19.1.1.5.1.4 |
dpsvOuiRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .dlinkPrimeCommon.19.1.1.5.1.5 |
dpsvInfo OBJECT IDENTIFIER .dlinkPrimeCommon.19.1.2 |
dpsvMemberPortsThe surveillance VLAN's member ports, includes the dynamically
learned ports.ro PortList (Q-BRIDGE-MIB) .dlinkPrimeCommon.19.1.2.1 |
dpsvDynamicPortsThe dynamically learned member ports of the surveillance VLAN.ro PortList (Q-BRIDGE-MIB) .dlinkPrimeCommon.19.1.2.2 |
dpsvDeviceTableThis table contains the information about the learned surveillance devices. SEQUENCE OF DpsvDeviceEntry .dlinkPrimeCommon.19.1.2.3 |
dpsvDeviceEntryIndicates the information of the connected surveillance device. DpsvDeviceEntry .dlinkPrimeCommon.19.1.2.3.1 |
dpsvDevicePortIfIdxIndicates the ifIndex of the port to which the surveillance device connects. InterfaceIndex (IF-MIB) .dlinkPrimeCommon.19.1.2.3.1.1 |
dpsvDeviceAddrIndicates the MAC address of the surveillance device. MacAddress (SNMPv2-TC) .dlinkPrimeCommon.19.1.2.3.1.2 |
dpsvDeviceCompTypeThe component type of the surveillance device.ro OuiComponentType .dlinkPrimeCommon.19.1.2.3.1.3 |
dpsvDeviceDescrThe description of the surveillance device. A zero length string
of this object indicates there is no description for this OUI.ro SnmpAdminString .dlinkPrimeCommon.19.1.2.3.1.4 |
dpsvDeviceStartTimeIndicates the start time of the connected surveillance device.ro DateAndTime (SNMPv2-TC) .dlinkPrimeCommon.19.1.2.3.1.5 |
dpsvDeviceStatusIndicates the status of the connected surveillance device.ro Enumeration .dlinkPrimeCommon.19.1.2.3.1.6 |
dpsvMIBConformance OBJECT IDENTIFIER .dlinkPrimeCommon.19.2 |
dpsvMIBCompliances OBJECT IDENTIFIER .dlinkPrimeCommon.19.2.1 |
dpsvMIBGroups OBJECT IDENTIFIER .dlinkPrimeCommon.19.2.2 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module