DLINKPRIME-QOS-MIB
The DLINKPRIME-QOS-MIB module enables monitoring and configuration of Quality of Service (QoS) parameters, including traffic classification, queue management, and bandwidth allocation policies, on D-Link Prime series networking devices. It provides access to specific counters and gauges for policing, shaping, and priority queuing mechanisms to ensure deterministic network performance.
Imported Objects
Objects
18 total| Object Name |
|---|
dlinkPrimeQosMIBThe Structure of QoS Infomation for the
proprietary enterprise. MODULE-IDENTITY .dlinkPrimeCommon.13 |
dpQosMIBObjects OBJECT IDENTIFIER .dlinkPrimeCommon.13.1 |
dpQosScheduling OBJECT IDENTIFIER .dlinkPrimeCommon.13.1.1 |
dpQosSchedulingModeTableThis table consists of a list of scheduling mechanism configurations
for ports. SEQUENCE OF DpQosSchedulingModeEntry .dlinkPrimeCommon.13.1.1.1 |
dpQosSchedulingModeEntryAn entry configures the scheduling mode on an interface. DpQosSchedulingModeEntry .dlinkPrimeCommon.13.1.1.1.1 |
dpQosSchedulingModeThis object indicates the mechanism of QoS scheduling on the interface.rw Enumeration .dlinkPrimeCommon.13.1.1.1.1.1 |
dpQosBandwidthCtrl OBJECT IDENTIFIER .dlinkPrimeCommon.13.1.2 |
dpQosBandwidthCtrlTableA table consists of a list of configurations for bandwidth control
on interfaces. SEQUENCE OF DpQosBandwidthCtrlEntry .dlinkPrimeCommon.13.1.2.1 |
dpQosBandwidthCtrlEntryAn entry configures the bandwidth on an interface.
An entry will exist for every applicable port. DpQosBandwidthCtrlEntry .dlinkPrimeCommon.13.1.2.1.1 |
dpQosBandwidthRxRateThis object indicates Rx Rate of the specified port.
The special value of 0 indicates there is no bandwidth
limit for ingress packets.rw Enumeration .dlinkPrimeCommon.13.1.2.1.1.1 |
dpQosBandwidthTxRateThis object indicates Tx Rate of the specified port.
The special value of 0 indicates there is no bandwidth
limit for egress packets.
It is based on the dpQosBandwidthTxRateMode field andrw Enumeration .dlinkPrimeCommon.13.1.2.1.1.2 |
dpQosCosCfg OBJECT IDENTIFIER .dlinkPrimeCommon.13.1.3 |
dpQosCosCfgTableThis table consists of a list of CoS configurations
for ports. SEQUENCE OF DpQosCosCfgEntry .dlinkPrimeCommon.13.1.3.1 |
dpQosCosCfgEntryAn entry configures the CoS on an interface. DpQosCosCfgEntry .dlinkPrimeCommon.13.1.3.1.1 |
dpQosCfgSetCosThis object indicates the CoS on the interface.rw Enumeration .dlinkPrimeCommon.13.1.3.1.1.1 |
dpQosMIBConformance OBJECT IDENTIFIER .dlinkPrimeCommon.13.2 |
dpQosCompliances OBJECT IDENTIFIER .dlinkPrimeCommon.13.2.1 |
dpQosGroups OBJECT IDENTIFIER .dlinkPrimeCommon.13.2.2 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module