DLINKPRIME-LBD-MIB
This MIB module defines objects for loopback detection.
Main OID:
dlinkPrimeLoopbackDetectMIB.dlinkPrimeCommon.7
19
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
19 total| Object Name |
|---|
dlinkPrimeLoopbackDetectMIBThis MIB module defines objects for loopback detection. MODULE-IDENTITY .dlinkPrimeCommon.7 |
dpLbdNotifications OBJECT IDENTIFIER .dlinkPrimeCommon.7.0 |
dpLbdLoopOccurredThis trap is sent when an interface loop occurs. NOTIFICATION-TYPE .dlinkPrimeCommon.7.0.1 |
dpLbdLoopRecoveryThis trap is sent when an interface loop recovery. NOTIFICATION-TYPE .dlinkPrimeCommon.7.0.2 |
dpLbdObjects OBJECT IDENTIFIER .dlinkPrimeCommon.7.1 |
dpLbdCtrlGlobalEnabledThis object indicates whether the loopback detection is enabled
globally.rw TruthValue (SNMPv2-TC) .dlinkPrimeCommon.7.1.1 |
dpLbdCtrlIntervalThis object indicates the interval in seconds at which LBD
packets are transmitted.rw INTEGER .dlinkPrimeCommon.7.1.2 |
dpLbdCtrlRecoverThis object indicates the recover in seconds after which LBD
interface shutdown.rw INTEGER (0|60..1000000) UNITS "seconds" .dlinkPrimeCommon.7.1.3 |
dpLbdNotifyEnabledSet to 'true' to enable global SNMP notification for loopback detection feature.
Setting the object to 'false' will disable SNMP notifications.rw TruthValue (SNMPv2-TC) .dlinkPrimeCommon.7.1.4 |
dpLbdIfCfgTableA list of loopback detection information entries. SEQUENCE OF DpLbdIfCfgEntry .dlinkPrimeCommon.7.1.5 |
dpLbdIfCfgEntryAn entry indicates the setting of loopback detection on an
interface. DpLbdIfCfgEntry .dlinkPrimeCommon.7.1.5.1 |
dpLbdIfCfgIndexThis object indicates the ifIndex of the physical port or port
channel. InterfaceIndex (IF-MIB) .dlinkPrimeCommon.7.1.5.1.1 |
dpLbdIfCfgEnabledThis object indicates whether the loopback detection is enabled on
the interface.rw TruthValue (SNMPv2-TC) .dlinkPrimeCommon.7.1.5.1.2 |
dpLbdIfLoopStatusThis object indicates whether the interface loopback status.ro Enumeration .dlinkPrimeCommon.7.1.5.1.3 |
dpLbdNotifyInfoThis identifier is a group for variable bindings for traps. OBJECT IDENTIFIER .dlinkPrimeCommon.7.1.8 |
dpLbdNotifyInfoIfIndexThis object indicates the interface id that has detected a loopback.ro InterfaceIndex (IF-MIB) .dlinkPrimeCommon.7.1.8.1 |
dpLbdConformance OBJECT IDENTIFIER .dlinkPrimeCommon.7.2 |
dpLbdMIBCompliances OBJECT IDENTIFIER .dlinkPrimeCommon.7.2.1 |
dpLbdMIBGroups OBJECT IDENTIFIER .dlinkPrimeCommon.7.2.2 |