DLINKPRIME-L2FDB-MIB
This MIB module defines objects for L2FDB.
Main OID:
dlinkPrimeL2FdbMIB.dlinkPrimeCommon.5
26
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
26 total| Object Name |
|---|
dlinkPrimeL2FdbMIBThis MIB module defines objects for L2FDB. MODULE-IDENTITY .dlinkPrimeCommon.5 |
dpL2FdbMIBNotifications OBJECT IDENTIFIER .dlinkPrimeCommon.5.0 |
dpL2FdbMIBObjects OBJECT IDENTIFIER .dlinkPrimeCommon.5.1 |
dpL2FdbGblCtrl OBJECT IDENTIFIER .dlinkPrimeCommon.5.1.1 |
dpL2FdbClearCtrl OBJECT IDENTIFIER .dlinkPrimeCommon.5.1.1.1 |
dpL2FdbClearAllMacAddrThis object clears all of the dynamic FDB entries, when set to 'clear'.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned.rw Enumeration .dlinkPrimeCommon.5.1.1.1.1 |
dpL2FdbAgingTimeSpecify the aging time in seconds.
The valid range is 5 to 1000000 seconds.
The special valie of 0 indicates the ging out function is disabled.rw Unsigned32 ( 0 | 5..1000000 ) UNITS "second" .dlinkPrimeCommon.5.1.1.2 |
dpL2FdbStaticUnicastTableThis table contains a list of configuration for
static unicast MAC addresses. SEQUENCE OF DpL2FdbStaticUnicastEntry .dlinkPrimeCommon.5.1.2 |
dpL2FdbStaticUnicastEntryA table entry represents configuration for a static
unicast MAC address information. DpL2FdbStaticUnicastEntry .dlinkPrimeCommon.5.1.2.1 |
dpL2FdbStaticUnicastVlanIDThe VLAN ID of the entry. VlanId (Q-BRIDGE-MIB) .dlinkPrimeCommon.5.1.2.1.1 |
dpL2FdbStaticUnicastMacAddrThe MAC address of the entry. MacAddress (SNMPv2-TC) .dlinkPrimeCommon.5.1.2.1.2 |
dpL2FdbStaticUnicastPortNumThe port number of the static unicast address.
The value of 0 indicates the CPU port.
The value of -1 indicates mac filter entry with permanentDrop type.rw Integer32 .dlinkPrimeCommon.5.1.2.1.3 |
dpL2FdbStaticUnicastRowStatusThis object indicates the RowStatus of this entry.rw RowStatus (SNMPv2-TC) .dlinkPrimeCommon.5.1.2.1.4 |
dpL2FdbStaticMulticastTableThis table contains a list of configuration for
static multicast MAC addresses. SEQUENCE OF DpL2FdbStaticMulticastEntry .dlinkPrimeCommon.5.1.3 |
dpL2FdbStaticMulticastEntryA table entry represents configuration for a static
multicast MAC address information. DpL2FdbStaticMulticastEntry .dlinkPrimeCommon.5.1.3.1 |
dpL2FdbStaticMulticastVlanIDThe VLAN ID of the entry. VlanId (Q-BRIDGE-MIB) .dlinkPrimeCommon.5.1.3.1.1 |
dpL2FdbStaticMulticastMacAddrThe MAC address of the entry. MacAddress (SNMPv2-TC) .dlinkPrimeCommon.5.1.3.1.2 |
dpL2FdbStaticMulticastEgressPortsThe port number of the static multicast address.rw PortList (Q-BRIDGE-MIB) .dlinkPrimeCommon.5.1.3.1.3 |
dpL2FdbStaticMulticastRowStatusThis object indicates the RowStatus of this entry.rw RowStatus (SNMPv2-TC) .dlinkPrimeCommon.5.1.3.1.4 |
dpL2FdbIfCtrlTableThis table contains a list of interface-specific configuration for
L2 FDB. SEQUENCE OF DpL2FdbIfCtrlEntry .dlinkPrimeCommon.5.1.4 |
dpL2FdbIfCtrlEntryAn entry represents interface L2 FDB configuration. DpL2FdbIfCtrlEntry .dlinkPrimeCommon.5.1.4.1 |
dpL2FdbIfMacLearningEnabledThis object indicates whether the MAC-address learning is enabled or not
on the physical interface.rw TruthValue (SNMPv2-TC) .dlinkPrimeCommon.5.1.4.1.1 |
dpL2FdbMcastFilterModeThis object indicates the handling method for multicast packets
on the corresponding interface.rw Enumeration .dlinkPrimeCommon.5.1.5 |
dpL2FdbMIBConformance OBJECT IDENTIFIER .dlinkPrimeCommon.5.2 |
dpL2FdbCompliances OBJECT IDENTIFIER .dlinkPrimeCommon.5.2.1 |
dpL2FdbGroups OBJECT IDENTIFIER .dlinkPrimeCommon.5.2.2 |