DL5400-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
276
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
276 total| Object Name |
|---|
digital-link OBJECT IDENTIFIER .1.3.6.1.4.1.300 |
IMPORTS Unknown .1.3.6.1.4.1.300 |
dl5400 OBJECT IDENTIFIER .1.3.6.1.4.1.300.110 |
dl5400ModulesAppearThere is a module appeared in the device. TRAP-TYPE .1.3.6.1.4.1.300.110.0.1 |
dl5400ModulesDisappearThere is a module disappeared in the device. TRAP-TYPE .1.3.6.1.4.1.300.110.0.2 |
dl5400SelfTestFailSelf Test failed on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.11 |
dl5400RamTestFailRAM Test failed on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.12 |
dl5400RomChecksumFailROM Checksum failed on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.13 |
dl5400FlashChecksumFailFlash Checksum failed on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.14 |
dl5400TimeNotSetThe Unit's time is not set. TRAP-TYPE .1.3.6.1.4.1.300.110.0.15 |
dl5400UnitRestartThe Unit is resetting. TRAP-TYPE .1.3.6.1.4.1.300.110.0.16 |
dl5400LampTestStartLamp Test started. TRAP-TYPE .1.3.6.1.4.1.300.110.0.17 |
dl5400LampTestEndLamp Test terminated. TRAP-TYPE .1.3.6.1.4.1.300.110.0.18 |
dl5400mgmtPOSTFailManagement POST failed. TRAP-TYPE .1.3.6.1.4.1.300.110.0.19 |
dl5400mgmtPOSTokManagement Port OK. TRAP-TYPE .1.3.6.1.4.1.300.110.0.20 |
dl5400FrontTemperatureHighThe unit's front temperature is high. TRAP-TYPE .1.3.6.1.4.1.300.110.0.21 |
dl5400FrontTemperatureOKThe unit's front temperature is OK. TRAP-TYPE .1.3.6.1.4.1.300.110.0.22 |
dl5400BackTemperatureHighThe unit's back temperature is high. TRAP-TYPE .1.3.6.1.4.1.300.110.0.23 |
dl5400BackTemperatureOKThe unit's back temperature is OK. TRAP-TYPE .1.3.6.1.4.1.300.110.0.24 |
dl5400ExternalMajorAlarmStartThe external major alarm input is active on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.25 |
dl5400ExternalMajorAlarmEndThe external major alarm input is de-activated on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.26 |
dl5400ExternalMinorAlarmStartThe external minor alarm input is active on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.27 |
dl5400ExternalMinorAlarmEndThe external minor alarm input is de-activated on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.28 |
dl5400ExternalStatusAlarmStartThe external status alarm input is active on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.29 |
dl5400ExternalStatusAlarmEndThe external status alarm input is de-activated on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.30 |
dl5400PrimaryClockFailUnit's primary clock has failed. TRAP-TYPE .1.3.6.1.4.1.300.110.0.31 |
dl5400PrimaryClockOkUnit's primary clock is OK. TRAP-TYPE .1.3.6.1.4.1.300.110.0.32 |
dl5400SecondaryClockFailUnit's Secondary clock has failed. TRAP-TYPE .1.3.6.1.4.1.300.110.0.33 |
dl5400SecondaryClockOkUnit's Secondary clock is OK. TRAP-TYPE .1.3.6.1.4.1.300.110.0.34 |
dl5400ExternalClockFailUnit's external clock has failed. TRAP-TYPE .1.3.6.1.4.1.300.110.0.35 |
dl5400ExternalClockOkUnit's external clock is OK. TRAP-TYPE .1.3.6.1.4.1.300.110.0.36 |
dl5400Fan1FailAlarmA fan 1 failed on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.37 |
dl5400Fan1OkA fan is ok on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.38 |
dl5400Fan2FailAlarmA fan 2 failed on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.39 |
dl5400Fan2OkA fan 2 is ok on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.40 |
dl5400PSFanFailedPower Supply Fan Failed on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.41 |
dl5400PSFanOKPower Supply Fan OK on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.42 |
dl5400PktProcessorPostFailPacket Processor POST Failed. TRAP-TYPE .1.3.6.1.4.1.300.110.0.43 |
dl5400PktProcessorPostOkPacket Processor POST OK. TRAP-TYPE .1.3.6.1.4.1.300.110.0.44 |
dl5400PacketProcessorMissingPacket Processor Missing. TRAP-TYPE .1.3.6.1.4.1.300.110.0.45 |
dl5400PacketProcessorOkPacket Processor OK. TRAP-TYPE .1.3.6.1.4.1.300.110.0.46 |
dl5400VoltageExceedsVoltage has exceeded allowed operating voltage range TRAP-TYPE .1.3.6.1.4.1.300.110.0.47 |
dl5400VoltageOkVoltage is within allowed limits TRAP-TYPE .1.3.6.1.4.1.300.110.0.48 |
dl5400ModuleProcessorFailModule Processor Failed TRAP-TYPE .1.3.6.1.4.1.300.110.0.49 |
dl5400ModuleProcessorOkModule Processor OK. TRAP-TYPE .1.3.6.1.4.1.300.110.0.50 |
dl5400ModulesCfgMismatchThere is configuration mismatch between equipped modules. TRAP-TYPE .1.3.6.1.4.1.300.110.0.51 |
dl5400ModulesCfgMatchThere is no configuration mismatch between equipped modules. TRAP-TYPE .1.3.6.1.4.1.300.110.0.52 |
dl5400UsePriClkAlarmUsing primary clock source on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.53 |
dl5400UseSecClkAlarmUsing secondary clock source on the unit. Primary clock
source failed on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.54 |
dl5400UseIntClkAlarmUsing internal clock source on the unit. Primary and
secondary clock sources failed on the unit. TRAP-TYPE .1.3.6.1.4.1.300.110.0.55 |
dl5400UseRxClk1AlarmReceive multiplexer synced to net 1. TRAP-TYPE .1.3.6.1.4.1.300.110.0.56 |
dl5400UseRxClk2AlarmReceive multiplexer synced to net 2. TRAP-TYPE .1.3.6.1.4.1.300.110.0.57 |
dl5400UseRxClk3AlarmReceive multiplexer synced to net 3. TRAP-TYPE .1.3.6.1.4.1.300.110.0.58 |
dl5400UseRxClk4AlarmReceive multiplexer synced to net 4. TRAP-TYPE .1.3.6.1.4.1.300.110.0.59 |
dl5400UseRxClk5AlarmReceive multiplexer synced to net 5. TRAP-TYPE .1.3.6.1.4.1.300.110.0.60 |
dl5400UseRxClk6AlarmReceive multiplexer synced to net 6. TRAP-TYPE .1.3.6.1.4.1.300.110.0.61 |
dl5400UseRxClk7AlarmReceive multiplexer synced to net 7. TRAP-TYPE .1.3.6.1.4.1.300.110.0.62 |
dl5400UseRxClk8AlarmReceive multiplexer synced to net 8. TRAP-TYPE .1.3.6.1.4.1.300.110.0.63 |
dl5400MLpppPOSTFailML-PPP POST failed. TRAP-TYPE .1.3.6.1.4.1.300.110.0.64 |
dl5400MLpppPOSTokML-PPP Port OK. TRAP-TYPE .1.3.6.1.4.1.300.110.0.65 |
dl5400MLpppModuleMissingML-PPP Module is Missing TRAP-TYPE .1.3.6.1.4.1.300.110.0.66 |
dl5400MLpppModuleOKML-PPP Module is OK TRAP-TYPE .1.3.6.1.4.1.300.110.0.67 |
dl5400MLpppInsufficientLinksML-PPP Insufficient links reported. TRAP-TYPE .1.3.6.1.4.1.300.110.0.68 |
dl5400MLpppInsufficientLinksOkInsufficient ML-PPP links alarm remitted. TRAP-TYPE .1.3.6.1.4.1.300.110.0.69 |
dl5400ModulesFailThere is a module failed in the device. TRAP-TYPE .1.3.6.1.4.1.300.110.0.70 |
dl5400ModulesUpThere is a module up in the device. TRAP-TYPE .1.3.6.1.4.1.300.110.0.71 |
dl5400LossOfSignalStartLoss of Signal occured on the specified Network port. TRAP-TYPE .1.3.6.1.4.1.300.110.0.100 |
dl5400LossOfSignalEndLoss of Signal ended on the specified Network port. TRAP-TYPE .1.3.6.1.4.1.300.110.0.101 |
dl5400LossOfFrameStartLoss of Frame ended on the specified Network port. TRAP-TYPE .1.3.6.1.4.1.300.110.0.102 |
dl5400LossOfFrameEndLoss of Frame ended on the specified Network port. TRAP-TYPE .1.3.6.1.4.1.300.110.0.103 |
dl5400AisStartAIS Alarm started on the specified Network port. TRAP-TYPE .1.3.6.1.4.1.300.110.0.104 |
dl5400AisEndAIS Alarm started on the specified Network port. TRAP-TYPE .1.3.6.1.4.1.300.110.0.105 |
dl5400RaiStartRAI Alarm(Yellow) received on the specified Network port. TRAP-TYPE .1.3.6.1.4.1.300.110.0.106 |
dl5400RaiEndRAI Alarm(Yellow) Ended on the specified Network port. TRAP-TYPE .1.3.6.1.4.1.300.110.0.107 |
dl5400netLineRemoteLoopbackStartNetwork Line/Remote Loopback on specified Network port . TRAP-TYPE .1.3.6.1.4.1.300.110.0.158 |
dl5400netLineRemoteLoopbackEndNetwork Line/Remote Loopback ended on specified Network port . TRAP-TYPE .1.3.6.1.4.1.300.110.0.159 |
dl5400pppEchoTimeoutPPP Echo Timeout. TRAP-TYPE .1.3.6.1.4.1.300.110.0.164 |
dl5400pppEchoTimeoutRemitPPP Echo Timeout Alarm Remitted. TRAP-TYPE .1.3.6.1.4.1.300.110.0.165 |
dl5400pppLineLoopbackStartPPP Line Loopback Start. TRAP-TYPE .1.3.6.1.4.1.300.110.0.166 |
dl5400pppLineLoopbackEndPPP Line Loopback End. TRAP-TYPE .1.3.6.1.4.1.300.110.0.167 |
dl5400pppLinkFallbackStartPPP Link FallbackStart. TRAP-TYPE .1.3.6.1.4.1.300.110.0.168 |
dl5400pppLinkFallbackEndPPP Link Fallback End. TRAP-TYPE .1.3.6.1.4.1.300.110.0.169 |
dl5400dteLocalLoopbackStartNetwork DTE Local Loopback on specified Network port . TRAP-TYPE .1.3.6.1.4.1.300.110.0.170 |
dl5400dteLocalLoopbackEndNetwork DTE Local Loopback ended on specified Network port . TRAP-TYPE .1.3.6.1.4.1.300.110.0.171 |
dl5400dteRemoteLoopbackStartNetwork DTE Remote Loopback on specified Network port . TRAP-TYPE .1.3.6.1.4.1.300.110.0.172 |
dl5400dteRemoteLoopbackEndNetwork DTE Remote Loopback ended on specified Network port . TRAP-TYPE .1.3.6.1.4.1.300.110.0.173 |
dl5400MLpppLinkDownML-PPP links down caused by ML-PPP Protocol Layer. TRAP-TYPE .1.3.6.1.4.1.300.110.0.174 |
dl5400MLpppLinkUpML-PPP links up caused by ML-PPP Protocol Layer. TRAP-TYPE .1.3.6.1.4.1.300.110.0.175 |
configuration OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.1 |
unitLevelConfig OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.1.1 |
unitSerialNumAn ID that uniquely and globally identifies the unit.
A Serial Number must consist of printable ASCII
characters 0x20..0x7E.ro DisplayString .1.3.6.1.4.1.300.110.1.1.1 |
unitNameA descriptive name that identifies the DL5400 unit.
Use of this parameter is optional, but recommended
to aid management.rw DisplayString .1.3.6.1.4.1.300.110.1.1.2 |
unitHwRevThe DL5400 hardware revision.ro DisplayString .1.3.6.1.4.1.300.110.1.1.3 |
unitSwRevThe DL5400 software revision.ro DisplayString .1.3.6.1.4.1.300.110.1.1.4 |
unitMibRevThe DL5400 MIB revision.ro DisplayString .1.3.6.1.4.1.300.110.1.1.5 |
unitFrontPnlThis feature enables (ON) or disables (OFF) the users
ability to make changes in the configuration or run
tests from the front panel display and buttons.rw Enumeration .1.3.6.1.4.1.300.110.1.1.6 |
unitDateYearThe DL5400's date: Year.rw TODYear .1.3.6.1.4.1.300.110.1.1.7 |
unitDateMonthThe DL5400's date: Month.rw TODMonth .1.3.6.1.4.1.300.110.1.1.8 |
unitDateDayThe DL5400's date: Day.rw TODDay .1.3.6.1.4.1.300.110.1.1.9 |
unitTimeHourThe DL5400's time: Hour.rw TODHour .1.3.6.1.4.1.300.110.1.1.10 |
unitTimeMinuteThe DL5400's time: Minute.rw TODMinute .1.3.6.1.4.1.300.110.1.1.11 |
unitTimeSecondThe DL5400's time: Second.rw TODSecond .1.3.6.1.4.1.300.110.1.1.12 |
unitTimezoneThis object is used to indicate the timezone
associated with the time of day that exists on
DL5400 System.
The enumerated values are defined as hours west
of Greenwhich, for example, g01Timezone represents
the time zone which is 1 hour west of Greenwhich.rw Enumeration .1.3.6.1.4.1.300.110.1.1.13 |
unitLedStatusThe defined values have the following description
Off - The unit is not equipped or is provision in an out of Service state
Green - No alarms, status or test conditions exists for the unit
Blink Amber
- Test conditions are present in the unit
Solid Amber
- A minor alarm condition persists in the unit or on some
interface of the unit, or the unit is powering up.
Red - An Alarm condition persists in the unit or on some interface of the unit
Blink-Green - reserved
Blink-Red - reservedro Enumeration .1.3.6.1.4.1.300.110.1.1.14 |
unitTimeStampTime Stamp on the unit of format
MM/DD/YYYY HH:MM:SS
This will be sent as a varbind along with all the traps
to NMS managerro DisplayString .1.3.6.1.4.1.300.110.1.1.15 |
unitModelTypeThe unit model typero Enumeration .1.3.6.1.4.1.300.110.1.1.16 |
unitRouteModeUnit Route Moderw Enumeration .1.3.6.1.4.1.300.110.1.1.17 |
unitTelnetConfig OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.1.2 |
unitTelnetIdleTimeoutThis object is used to indicate
number of minutes of inactivity
required before setting the
telnet access point to auto-logoff.rw INTEGER .1.3.6.1.4.1.300.110.1.2.1 |
unitDteEnetCfg OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.1.3 |
dteEnetTableTable of all Dte Ethernet ports in the system SEQUENCE OF DteEnetEntry .1.3.6.1.4.1.300.110.1.3.1 |
dteEnetEntryAn entry in the dteEnetTable DteEnetEntry .1.3.6.1.4.1.300.110.1.3.1.1 |
dteEnetIndexThe dteEnet port indexro Enumeration .1.3.6.1.4.1.300.110.1.3.1.1.1 |
dteEnetIpAddressIP address assigned to the DTE port of the DL5400.rw IpAddress .1.3.6.1.4.1.300.110.1.3.1.1.2 |
dteEnetSubnetMaskIP Subnet mask assigned to the DTE port of the DL5400.rw IpAddress .1.3.6.1.4.1.300.110.1.3.1.1.3 |
dteEnetMacAddressEthernet MAC address of this dte portro OCTET STRING .1.3.6.1.4.1.300.110.1.3.1.1.4 |
dteEnetProtocolEthernet protocol used by the DL5400. dix is also called Ethernet-II.rw Enumeration .1.3.6.1.4.1.300.110.1.3.1.1.5 |
dteEnetOperEthernet operation used by the DL5400.rw Enumeration .1.3.6.1.4.1.300.110.1.3.1.1.6 |
dteEnetModeEthernet mode used by the DL5400.rw Enumeration .1.3.6.1.4.1.300.110.1.3.1.1.7 |
dteEnetOperStatusEthernet operation statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.300.110.1.3.1.1.8 |
dteEnetModeStatusEthernet Mode statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.300.110.1.3.1.1.9 |
comm1SerialConfig OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.1.5 |
comm1SerialPortStateThis object is used to enable or
disable port.rw Enumeration .1.3.6.1.4.1.300.110.1.5.1 |
comm1SerialBaudRateCOMM 1 Baud Rate.rw DL5400commBaudRate .1.3.6.1.4.1.300.110.1.5.2 |
comm1SerialBitsPerWordCOMM 1 Bits Per Word.rw DL5400commNumDataBits .1.3.6.1.4.1.300.110.1.5.3 |
comm1SerialStopBitsCOMM 1 Stop Bits.rw DL5400commStopBits .1.3.6.1.4.1.300.110.1.5.4 |
comm1SerialParityCOMM 1 Parity.rw DL5400commParity .1.3.6.1.4.1.300.110.1.5.5 |
comm1SerialFlowControlCOMM 1 Flow Control.rw DL5400commFlowControl .1.3.6.1.4.1.300.110.1.5.6 |
comm1SerialLogoutOnLosThis object is used to enable or
disable auto-logoff on loss of DSR.rw Enumeration .1.3.6.1.4.1.300.110.1.5.7 |
comm1SerialIdleTimeoutThis object is used to indicate
number of minutes of inactivity
required before setting this
serial access point to
auto-logoff.rw INTEGER .1.3.6.1.4.1.300.110.1.5.8 |
comm2SerialConfig OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.1.6 |
comm2SerialPortStateThis object is used to enable or
disable port.rw Enumeration .1.3.6.1.4.1.300.110.1.6.1 |
comm2SerialBaudRateCOMM 2 Baud Rate.rw DL5400commBaudRate .1.3.6.1.4.1.300.110.1.6.2 |
comm2SerialBitsPerWordCOMM 2 Bits Per Word.rw DL5400commNumDataBits .1.3.6.1.4.1.300.110.1.6.3 |
comm2SerialStopBitsCOMM 2 Stop Bits.rw DL5400commStopBits .1.3.6.1.4.1.300.110.1.6.4 |
comm2SerialParityCOMM 2 Parity.rw DL5400commParity .1.3.6.1.4.1.300.110.1.6.5 |
comm2SerialFlowControlCOMM 2 Flow Control. HwFlowControl option is not applicable
for multidrop serial port when in MultiDrop moderw DL5400commFlowControl .1.3.6.1.4.1.300.110.1.6.6 |
comm2SerialLogoutOnLosThis object is used to enable or
disable auto-logoff on loss of DSR.rw Enumeration .1.3.6.1.4.1.300.110.1.6.7 |
comm2SerialIdleTimeoutThis object is used to indicate
number of minutes of inactivity
required before setting this
serial access point to
auto-logoff.rw INTEGER .1.3.6.1.4.1.300.110.1.6.8 |
comm2InMDmodeThis object indicates if this serial
port is in multidrop mode or not.rw Enumeration .1.3.6.1.4.1.300.110.1.6.9 |
comm2InMDIdIdentifies the multidrop sessionrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.300.110.1.6.10 |
netConfig OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.1.7 |
netPriTxClkThe primary transmit clock source for DL5400.rw DL5400TxClkSrc .1.3.6.1.4.1.300.110.1.7.1 |
netPriLoopPortThe primary loop port clock source for DL5400.rw INTEGER .1.3.6.1.4.1.300.110.1.7.2 |
netSecTxClkThe secondary transmit clock source for DL5400.rw DL5400TxClkSrc .1.3.6.1.4.1.300.110.1.7.3 |
netSecLoopPortThe secondary loop port clock source for DL5400.rw INTEGER .1.3.6.1.4.1.300.110.1.7.4 |
netExtClkFrequencyThe defined parameters are the external clock frequencies.
The user must provision what frequency is to be usedrw Enumeration .1.3.6.1.4.1.300.110.1.7.5 |
netPriStatusPrimary clock operation statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.300.110.1.7.6 |
netSecStatusSecondary clock operation statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.300.110.1.7.7 |
netActiveStatusActive clock operation statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.300.110.1.7.8 |
netSuppressYeldetThis enables or disables the suppression of
Yellow Alarm (RAI) detection. Applicable in
SF Framingrw Enumeration .1.3.6.1.4.1.300.110.1.7.9 |
netLineTypeTells if this is a T1 or E1 devicero Enumeration .1.3.6.1.4.1.300.110.1.7.10 |
netPortTableTable of all network port in the system. SEQUENCE OF NetPortEntry .1.3.6.1.4.1.300.110.1.7.11 |
netPortEntryAn entry in the Net Port Table NetPortEntry .1.3.6.1.4.1.300.110.1.7.11.1 |
netPortIndexThe network port index.ro INTEGER .1.3.6.1.4.1.300.110.1.7.11.1.1 |
netAdminTells the Net DS1 Admin staterw Enumeration .1.3.6.1.4.1.300.110.1.7.11.1.2 |
netFramingFormatThis variable describes the Framing Format
option for the network port.rw Enumeration .1.3.6.1.4.1.300.110.1.7.11.1.3 |
netLineCodeThis variable describes the Line Code
option for the network port.rw Enumeration .1.3.6.1.4.1.300.110.1.7.11.1.4 |
netLBOThis selects the line build out value in dBs and
applies to CSU/DSU mode only.rw Enumeration .1.3.6.1.4.1.300.110.1.7.11.1.5 |
netEGLThis selects the equalizer gain limit in dBs and
applies to CSU mode only.rw Enumeration .1.3.6.1.4.1.300.110.1.7.11.1.6 |
netFDL'other' indicates that a protocol other than
one following is used.
'dsx1Ansi-T1-403' refers to the FDL exchange
recommended by ANSI.
'dsx1Att-54016' refers to ESF FDL exchanges.
'dsx1Fdl-none' indicates that the device does
not use the FDL.rw Enumeration .1.3.6.1.4.1.300.110.1.7.11.1.7 |
netSetCodeenabled or disabled setCode feature.rw Enumeration .1.3.6.1.4.1.300.110.1.7.11.1.8 |
netClockThis selects the source of Transmit clock.rw Enumeration .1.3.6.1.4.1.300.110.1.7.11.1.9 |
netFrameStatusFraming Operational State.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.300.110.1.7.11.1.10 |
netFrameUpTimeTells the Framing UpTime.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.300.110.1.7.11.1.11 |
unitSnmpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.1.8 |
unitSnmpTrapAddrTableA list of IP addresses of the management stations
along with information on how to direct a trap to
that addresss SEQUENCE OF UnitSnmpTrapAddrEntry .1.3.6.1.4.1.300.110.1.8.1 |
unitSnmpTrapAddrEntryAn entry in the Snmp trap address table UnitSnmpTrapAddrEntry .1.3.6.1.4.1.300.110.1.8.1.1 |
unitSnmpTrapHostAddrSpecifies the IP address
of the management station
to which this unit sends traps.ro IpAddress .1.3.6.1.4.1.300.110.1.8.1.1.1 |
unitSnmpTrapDirectionSpecifies the way the trap is to be sent to the hostro Enumeration .1.3.6.1.4.1.300.110.1.8.1.1.2 |
unitSnmpTrapDevStateSpecifies whether to forward or block SNMP traps on device.rw Enumeration .1.3.6.1.4.1.300.110.1.8.2 |
unitSnmpTrapCommunitySpecifies the Community Name
of the management station
to which this unit sends traps.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.300.110.1.8.3 |
unitPPPConfig OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.1.9 |
pppPortTableTable of all network ports in the system. SEQUENCE OF PPPPortEntry .1.3.6.1.4.1.300.110.1.9.1 |
pppPortEntryAn entry in the PPP Port table PPPPortEntry .1.3.6.1.4.1.300.110.1.9.1.1 |
pppPortIndexPort number of the Net port.ro Enumeration .1.3.6.1.4.1.300.110.1.9.1.1.1 |
pppPortInitialMRUThe initial Maximum Receive Unit (MRU) that
the local PPP entity will advertise to the
remote entity. If the value of this variable is
0 then the local PPP entity will not advertise
any MRU to the remote entity and the default
MRU will be assumed. Changing this object will
have effect when the link is next restarted.rw INTEGER .1.3.6.1.4.1.300.110.1.9.1.1.2 |
pppPortMagicNumberIf true(2) then the local node will attempt to
perform Magic Number negotiation with the
remote node. If false(1) then this negotiation
is not performed. In any event, the local node
will comply with any magic number negotiations
attempted by the remote node, per the PPP
specification. Changing this object will have
effect when the link is next restarted.rw Enumeration .1.3.6.1.4.1.300.110.1.9.1.1.3 |
pppPortFcsSizeThe size of the FCS, in bits, the local node
will attempt to negotiate for use with the
remote node. Regardless of the value of this
object, the local node will comply with any FCS
size negotiations initiated by the remote node,
per the PPP specification. Changing this object
will have effect when the link is next
restarted.rw Enumeration .1.3.6.1.4.1.300.110.1.9.1.1.4 |
pppPortRestorePPP port restore mode, auto or manual.rw Enumeration .1.3.6.1.4.1.300.110.1.9.1.1.5 |
unitMLPPPConfig OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.1.9.2 |
mlPPPIpAddressIP Address assigned to the ML-PPP port of DL5400.rw IpAddress .1.3.6.1.4.1.300.110.1.9.2.1 |
mlPPPSubnetMaskIP Subnet mask assigned to the ML-PPP link of DL5400.rw IpAddress .1.3.6.1.4.1.300.110.1.9.2.2 |
mlPPPNumberedInterfaceNumbered Interface enabled or disabled.rw Enumeration .1.3.6.1.4.1.300.110.1.9.2.3 |
mlPPPMRRUMaximum Received Reconstructed Unit of ML-PPP.rw INTEGER .1.3.6.1.4.1.300.110.1.9.2.4 |
mlPPPBundleStatusTells the current bundle statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.300.110.1.9.2.5 |
mlPPPBundleUpTimeThe time (in hundredths of a second) since the
bundle is up.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.300.110.1.9.2.6 |
mlPPPIPCPStateThe current state of IPCP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.300.110.1.9.2.7 |
mlPPPPortTableTable of all mlppp port in the system. SEQUENCE OF MLPPPPortEntry .1.3.6.1.4.1.300.110.1.9.3 |
mlPPPPortEntryAn entry in the mlppp Port Table MLPPPPortEntry .1.3.6.1.4.1.300.110.1.9.3.1 |
mlPPPPortIndexThe network port index.ro INTEGER .1.3.6.1.4.1.300.110.1.9.3.1.1 |
mlPPPAdminTells the MLPPP Admin State.rw Enumeration .1.3.6.1.4.1.300.110.1.9.3.1.2 |
mlPPPStatusTells the MLPPP Operational State.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.300.110.1.9.3.1.3 |
mlPPPUpTimeThe time (in hundredths of a second) since the
MLPPP is up.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.300.110.1.9.3.1.4 |
mlPPPLCPStateTells the LCP Operational State.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.300.110.1.9.3.1.5 |
unitRouterConfig OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.1.10 |
unitStaticRoutingTableTable of all static routing entries in the system. SEQUENCE OF StaticRoutingEntry .1.3.6.1.4.1.300.110.1.10.1 |
staticRoutingEntryAn entry in the static routing table. StaticRoutingEntry .1.3.6.1.4.1.300.110.1.10.1.1 |
routeDestinationDestination of the static route.rw IpAddress .1.3.6.1.4.1.300.110.1.10.1.1.1 |
routeNetworkMaskNetwork Maskrw IpAddress .1.3.6.1.4.1.300.110.1.10.1.1.2 |
routeNextHopAddressAddress of the next hop router. The next hop router
must be on the same local network as DL5400rw IpAddress .1.3.6.1.4.1.300.110.1.10.1.1.3 |
routeMetricNumber of hops between DL5400 and the destination.rw INTEGER .1.3.6.1.4.1.300.110.1.10.1.1.4 |
routeDirectionDirection of the Route, Network(NUM) or WAN.rw Enumeration .1.3.6.1.4.1.300.110.1.10.1.1.5 |
routeStatusWriting invalid has the effect of deleting
this interface.rw DL5400Validation .1.3.6.1.4.1.300.110.1.10.1.1.6 |
unitArpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.1.11 |
unitClearArpTableClear all arp entries in the system.rw Enumeration .1.3.6.1.4.1.300.110.1.11.1 |
unitArpTableTable of all arp entries in the system. SEQUENCE OF UnitArpEntry .1.3.6.1.4.1.300.110.1.11.2 |
unitArpEntryAn entry in the arp table. UnitArpEntry .1.3.6.1.4.1.300.110.1.11.2.1 |
arpEntryNumEntry Number in the arp table.ro INTEGER .1.3.6.1.4.1.300.110.1.11.2.1.1 |
arpIPAddressEntry IpAddress in the arp table.ro IpAddress .1.3.6.1.4.1.300.110.1.11.2.1.2 |
arpMACAddressEntry MAC address in the arp table.ro OCTET STRING .1.3.6.1.4.1.300.110.1.11.2.1.3 |
arpPortNumEntry Port Number in the arp table.ro INTEGER .1.3.6.1.4.1.300.110.1.11.2.1.4 |
alarms OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.2 |
unitAlarmConfig OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.2.1 |
unitAlarmStatusTableThe Unit Level alarms and status table. SEQUENCE OF UnitAlarmStatusEntry .1.3.6.1.4.1.300.110.2.1.1 |
unitAlarmStatusEntryAn Entry in the unit Alarms Table. UnitAlarmStatusEntry .1.3.6.1.4.1.300.110.2.1.1.1 |
unitAlarmIndexAn index value that uniquely identifies a
Unit Level alarm entry.ro INTEGER .1.3.6.1.4.1.300.110.2.1.1.1.1 |
unitAlarmSeverityThis parameter indicates the severity of
the alarm, or may indicate that the data is
status only.ro Enumeration .1.3.6.1.4.1.300.110.2.1.1.1.2 |
unitAlarmTypeThis parameter is the code for the alarm or
status type. This code is used to index
into an array of text strings to present a
message to the human operator.ro DL5400Event .1.3.6.1.4.1.300.110.2.1.1.1.3 |
unitAlarmOriginCardNumThe card type of the device
originating the event.ro DL5400CardId .1.3.6.1.4.1.300.110.2.1.1.1.4 |
unitAlarmOriginPortNumThe port number of the device
originating the event.ro DL5400PortId .1.3.6.1.4.1.300.110.2.1.1.1.5 |
events OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.3 |
unitEventTableThe Unit Level event history table. SEQUENCE OF UnitEventEntry .1.3.6.1.4.1.300.110.3.1 |
unitEventEntryAn entry in the Unit Level event history table. UnitEventEntry .1.3.6.1.4.1.300.110.3.1.1 |
unitEventIndexAn index that uniquely identifies a
Unit Level event entry.ro INTEGER .1.3.6.1.4.1.300.110.3.1.1.1 |
unitEventSeverityThis parameter indicates whether an entry
is status-only or the severity of an alarm
entry.ro Enumeration .1.3.6.1.4.1.300.110.3.1.1.2 |
unitEventHourThe hour that the event occurred.ro TODHour .1.3.6.1.4.1.300.110.3.1.1.3 |
unitEventMinuteThe minute that the event occurred.ro TODMinute .1.3.6.1.4.1.300.110.3.1.1.4 |
unitEventSecondThe second that the event occurred.ro TODSecond .1.3.6.1.4.1.300.110.3.1.1.5 |
unitEventMonthThe month that the event occurred.ro TODMonth .1.3.6.1.4.1.300.110.3.1.1.6 |
unitEventDayThe day that the event occurred.ro TODDay .1.3.6.1.4.1.300.110.3.1.1.7 |
unitEventYearThe year that the event occurred.ro TODYear .1.3.6.1.4.1.300.110.3.1.1.8 |
unitEventOriginCardNumThe card type of the device
originating the event.ro DL5400CardId .1.3.6.1.4.1.300.110.3.1.1.9 |
unitEventOriginPortNumThe port number of the device
originating the event.ro DL5400PortId .1.3.6.1.4.1.300.110.3.1.1.10 |
unitEventTypeThis parameter is the code for the event
type. This code is used to index into an
array of text strings to present a message
to the human operator.ro DL5400Event .1.3.6.1.4.1.300.110.3.1.1.11 |
statistics OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.4 |
arpStats OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.4.1 |
arpbadLengthFieldBad Length Fieldro Counter .1.3.6.1.4.1.300.110.4.1.1 |
arpunsupportedHardwareunsupported Hardwarero Counter .1.3.6.1.4.1.300.110.4.1.2 |
arpunsupportedProtocolunsupported Protocolro Counter .1.3.6.1.4.1.300.110.4.1.3 |
arpinvalidSenderAddrtotal number of packets with invalid sender protocol addressro Counter .1.3.6.1.4.1.300.110.4.1.4 |
arpinvalidTargetAddrtotal number of packets with invalid target protocol addressro Counter .1.3.6.1.4.1.300.110.4.1.5 |
arpbadAddressbad addressro Counter .1.3.6.1.4.1.300.110.4.1.6 |
arppktsReceivedtotal number of packets recievedro Counter .1.3.6.1.4.1.300.110.4.1.7 |
arpshortPktsReceivedtotal number of short packets recievedro Counter .1.3.6.1.4.1.300.110.4.1.8 |
arppktsFromMeReceivedtotal number of packets from me receivedro Counter .1.3.6.1.4.1.300.110.4.1.9 |
arpsrcBcstReceivedtotal number of source broadcasts receivedro Counter .1.3.6.1.4.1.300.110.4.1.10 |
arprepliedSenttotal number of replies sentro Counter .1.3.6.1.4.1.300.110.4.1.11 |
arpincomingRequeststotal number of incoming requestsro Counter .1.3.6.1.4.1.300.110.4.1.12 |
arprequestSenttotal number of requests sentro Counter .1.3.6.1.4.1.300.110.4.1.13 |
arpnoMACAddrNo MAC addressro Counter .1.3.6.1.4.1.300.110.4.1.14 |
hdlcStatsTableThe hdlc statistics table. SEQUENCE OF HdlcStatsEntry .1.3.6.1.4.1.300.110.4.2 |
hdlcStatsEntryAn entry in the Hdlc statistics table. HdlcStatsEntry .1.3.6.1.4.1.300.110.4.2.1 |
hdlcPortIndexPort Indexro INTEGER .1.3.6.1.4.1.300.110.4.2.1.1 |
hdlcLinkStatusBadFCScBad FCSro Counter .1.3.6.1.4.1.300.110.4.2.1.2 |
hdlcFramesAbortedFrame abortedro Counter .1.3.6.1.4.1.300.110.4.2.1.3 |
hdlcFramesNotAlignedFrame not alignedro Counter .1.3.6.1.4.1.300.110.4.2.1.4 |
hdlcOctetsRcvOctets Receivedro Counter .1.3.6.1.4.1.300.110.4.2.1.5 |
hdlcPctsRcvPackets Receivedro Counter .1.3.6.1.4.1.300.110.4.2.1.6 |
hdlcOctetsTrsmtOctets Transmittedro Counter .1.3.6.1.4.1.300.110.4.2.1.7 |
hdlcPctsTrsmtPackets Transmittedro Counter .1.3.6.1.4.1.300.110.4.2.1.8 |
miscStats OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.4.3 |
miscprotocolPctsDumpedRx packets with IF error on data Ethernet interfacero Counter .1.3.6.1.4.1.300.110.4.3.1 |
miscnonroutablePctsRx packets non routable on data Ehternet interfacero Counter .1.3.6.1.4.1.300.110.4.3.2 |
clrStats OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.4.4 |
clearAllStatsclear all statisticsrw Enumeration .1.3.6.1.4.1.300.110.4.4.1 |
clearCur15Minclear current 15 minutes statisticsrw Enumeration .1.3.6.1.4.1.300.110.4.4.2 |
clearCur24Hrclear current 24 hours statisticsrw Enumeration .1.3.6.1.4.1.300.110.4.4.3 |
clearOld15Minclear old 15 minutes statisticsrw Enumeration .1.3.6.1.4.1.300.110.4.4.4 |
clearOld24Hrclear old 24 hours statisticsrw Enumeration .1.3.6.1.4.1.300.110.4.4.5 |
maintenance OBJECT IDENTIFIER .1.3.6.1.4.1.300.110.5 |
maintModTableTable of all Module Status in the system SEQUENCE OF MaintModEntry .1.3.6.1.4.1.300.110.5.1 |
maintModEntryAn entry in the maintModTable MaintModEntry .1.3.6.1.4.1.300.110.5.1.1 |
maintModIndexThe module indexro Enumeration .1.3.6.1.4.1.300.110.5.1.1.1 |
maintModStatusModule actual statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.300.110.5.1.1.2 |
maintOperstatusModule Operational statusro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.300.110.5.1.1.3 |