DL-SLA-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for DL-SLA-MIB.
93
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
93 total| Object Name |
|---|
digital-link OBJECT IDENTIFIER .1.3.6.1.4.1.300 |
RFC1155-SMI Unknown .1.3.6.1.4.1.300 |
dl-ServiceLevelAgreement OBJECT IDENTIFIER .1.3.6.1.4.1.300.260 |
fDRThresholdTrapThis trap will be sent if 'fDRNumberOfThresholdViolations'
is incremented. The VARIABLES contain the DLCI number whose
Frame Delivery Ratio threshold violation is updated. TRAP-TYPE .1.3.6.1.4.1.300.260.0.1 |
dDRThresholdTrapThis trap will be sent if 'dDRNumberOfThresholdViolations'
is incremented. The VARIABLES contain the DLCI number whose
Data Delivery Ratio threshold violation is updated. TRAP-TYPE .1.3.6.1.4.1.300.260.0.2 |
delayThresholdTrapThis trap will be sent if 'delayNumberOfThresholdViolations'
is incremented. The VARIABLES contain the DLCI number whose
Delay threshold violation is updated. TRAP-TYPE .1.3.6.1.4.1.300.260.0.3 |
dlcSLAConfigurationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.300.260.1 |
unitSLAConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.300.260.1.1 |
configSLAThis object represents whether SLA is enabled or disabled on this unit.rw Enumeration .1.3.6.1.4.1.300.260.1.1.1 |
unitSamplingPeriodForFDR-DDRThis object is to configure the sampling period in minutes for Frame
Delivery Ratio and Data Delivery Ratio. The default is 1 minute.rw INTEGER .1.3.6.1.4.1.300.260.1.1.2 |
unitSamplingPeriodForDelayMeasurementThis object is to configure the sampling period in minutes for Delay
Measurements. The default is 1 minute.rw INTEGER .1.3.6.1.4.1.300.260.1.1.3 |
unitThresholdForFDRThis object is to configure the threshold in one thousandth of a
percentage for Frame Delivery Ratio. A value of 0 disables the trap
altogether.rw INTEGER .1.3.6.1.4.1.300.260.1.1.4 |
unitThresholdForDDRThis object is to configure the threshold in one thousandth of a
percentage for Data Delivery Ratio. A value of 0 disables the trap
altogether.rw INTEGER .1.3.6.1.4.1.300.260.1.1.5 |
unitDelayMeasurementPacketSizeThis object is to configure the size in bytes of Delay Measurement
Packets, one size of all DLCIs.rw INTEGER .1.3.6.1.4.1.300.260.1.1.6 |
unitOamDomainIdentifierThis object is the Domain Identifier for OA&M protocol.
All end points participating in this SLA measurement must have the SAME
OA&M Domain Identifier. The default is 0.rw Counter .1.3.6.1.4.1.300.260.1.1.7 |
unitOamLocationIdentifierThis object is the Location Identifier for OA&M protocol.
All end points participating in this SLA measurement must have a unique
OA&M Location Identifier.rw Counter .1.3.6.1.4.1.300.260.1.1.8 |
perDLCIConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.300.260.1.2 |
configurationPerDLCITableConfiguration Table Per DLCI SEQUENCE OF ConfigurationPerDLCIEntry .1.3.6.1.4.1.300.260.1.2.1 |
configurationPerDLCIEntryAn entry in the Configuration per DLCI table. ConfigurationPerDLCIEntry .1.3.6.1.4.1.300.260.1.2.1.1 |
configurationPerDLCITableIndexThe index of Configuration Per DLCI table, which is DLCI number.ro INTEGER .1.3.6.1.4.1.300.260.1.2.1.1.1 |
commitedInformationRatePerDLCIThis is the DLCI's Committed Information Rate (CIR).
The CIR can be discovered automatically if LMI Rev 1.0 is used.
If Annex A or Annex D is used, then the CIR must be entered manually
in the DLCI table. The DLCI table is in the enterprise MIB.ro INTEGER .1.3.6.1.4.1.300.260.1.2.1.1.2 |
remoteDLCIPerDLCIDLCI of the far end unit on each DLCI, which is discovered using
Frame Relay OA&M Protocol. It will be stored in volatile memory.ro INTEGER .1.3.6.1.4.1.300.260.1.2.1.1.3 |
remoteIpAddressPerDLCIIP Address of the NET port of the far end unit on each DLCI, which
is discovered using Frame Relay OA&M Protocol. It will be stored in
volatile memory.ro IpAddress .1.3.6.1.4.1.300.260.1.2.1.1.4 |
thresholdForDelayMeasurementsPerDLCIThis object represents this DLCI's delay threshold in milliseconds.
The default is 64000. A value of 0 disables the trap altogether.rw INTEGER .1.3.6.1.4.1.300.260.1.2.1.1.5 |
dlcSLAStatisticsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.300.260.2 |
dlcDeliveryRatioStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.300.260.2.1 |
deliveryRatioPerDLCITableLifetime Delivery counter Table Per DLCI, contains both Frame Delivery
Ratio and Data Delivery Ratio. SEQUENCE OF DeliveryRatioPerDLCIEntry .1.3.6.1.4.1.300.260.2.1.1 |
deliveryRatioPerDLCIEntryAn entry in the Delivery Ratio table. DeliveryRatioPerDLCIEntry .1.3.6.1.4.1.300.260.2.1.1.1 |
deliveryRatioPerDLCITableIndexThe index of Delivery Ratio Table, which is the same value as
configurationPerDLCITableIndex.ro INTEGER .1.3.6.1.4.1.300.260.2.1.1.1.1 |
deliveryTableEncodedValueThis object represents the value of the whole row of the table.
If the table. The intent of object is to increase the efficiency
of retrieving the table. For each object value in this table,
which are all of Counter type, it will be represented with 4 bytes
of data. The byte order of the Counter value will be MSB ... LSB.
This object will contain the value of all objects on the table,
except 'deliveryRatioPerDLCITableIndex'.ro OCTET STRING .1.3.6.1.4.1.300.260.2.1.1.1.2 |
deliveryTableTimestampTimestamp of the last sample for delivery Entry statistics.
Each time the near end of the DLCI receives Delivery Ratio Results
Information Field, this number will contain the unit's current
timestamp. A timestamp is a 32-bit number representing the number
of seconds that have elapsed since 12:00AM, January 1, 1970.roobsolete Counter .1.3.6.1.4.1.300.260.2.1.1.1.3 |
fTCLperDLCINumber of frames transmitted at the near end within CIR on this DLCI.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.4 |
fTELperDLCINumber of frames transmitted at the near end above CIR on this DLCIro Counter .1.3.6.1.4.1.300.260.2.1.1.1.5 |
fRCLperDLCINumber of frames received at the near end on this DLCI within CIR.
These frames will have the Discard Eligible (DE) bit reset.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.6 |
fRELperDLCINumber of frames received at the near end on this DLCI above CIR.
These frames will have the Discard Eligible (DE) bit set.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.7 |
fTCRperDLCINumber of frames transmitted at the far end within CIR on this DLCI.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.8 |
fTERperDLCINumber of frames transmitted at the far end above CIR on this DLCI.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.9 |
fRCRperDLCINumber of frames received at the far end on this DLCI within CIR.
These frames will have the Discard Eligible (DE) bit reset.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.10 |
fRERperDLCINumber of frames received at the far end on this DLCI above CIR.
These frames will have the Discard Eligible (DE) bit set.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.11 |
fDRNumberOfSamplesTakenNumber of samples taken for Frame Delivery Statistics.
Each time the near end receives the Frame Delivery Ratio Results
Information Field, this counter will be incremented.roobsolete Counter .1.3.6.1.4.1.300.260.2.1.1.1.12 |
fDRNumberOfThresholdViolationsNumber of threshold violations for Frame Delivery.
FDRCL = fRCRPerDLCI / fTCLPerDLCI
FDRCR = fRCLPerDLCI / fTCRPerDLCI
For each sample, FDRCL and FDRCR are compared to the threshold
configured on object 'unitThresholdForFDR'. When either FDRCL
or FDRCR is less than the threshold, this counter is incremented.roobsolete Counter .1.3.6.1.4.1.300.260.2.1.1.1.13 |
dTCLperDLCINumber of bytes transmitted to the network within CIR on this DLCI.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.14 |
dTELperDLCINumber of bytes transmitted to the network above CIR on this DLCIro Counter .1.3.6.1.4.1.300.260.2.1.1.1.15 |
dRCLperDLCINumber of bytes received at the near end on this DLCI within CIR.
These frames will have the Discard Eligible (DE) bit reset.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.16 |
dRELperDLCINumber of bytes received at the near end of this DLCI above CIR.
These frames will have the Discard Eligible (DE) bit set.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.17 |
dTCRperDLCINumber of bytes transmitted at the far end within CIR on this DLCI.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.18 |
dTERperDLCINumber of bytes transmitted at the far end above CIR on this DLCI.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.19 |
dRCRperDLCINumber of bytes received at the far end on this DLCI above CIR.
These frames will have the Discard Eligible (DE) bit reset.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.20 |
dRERperDLCINumber of bytes received at the far end on his DLCI above CIR.
These frames will have the Discard Eligible (DE) bit set.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.21 |
dDRNumberOfSamplesTakenNumber of samples taken for Data Delivery statistics.
Each time the near end receives the Data Delivery Ratio Results
Information Field, this counter will be incremented.roobsolete Counter .1.3.6.1.4.1.300.260.2.1.1.1.22 |
dDRNumberOfThresholdViolationsNumber of threshold violations for Data Delivery statistics.
DDRCL = dRCRPerDLCI / dTCLPerDLCI
DDRCR = dRCLPerDLCI / dTCRPerDLCI
For each sample, DDRCL and DDRCR are compared to the threshold
configured on object 'unitThresholdForDDR'. When either DDRCL
or DDRCR is less than the threshold, this counter is incremented.roobsolete Counter .1.3.6.1.4.1.300.260.2.1.1.1.23 |
txFDRTimestampTimestamp of the last sample for delivery Entry statistics.
Each time the near end of the DLCI receives Delivery Ratio Results
Information Field, this number will contain the unit's current
timestamp. A timestamp is a 32-bit number representing the number
of seconds that have elapsed since 12:00AM, January 1, 1970.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.24 |
txFDRNumberOfSamplesTakenNumber of samples taken for Frame Delivery Statistics.
Each time the near end receives the Frame Delivery Ratio Results
Information Field, this counter will be incremented.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.25 |
txFDRNumberOfThresholdViolationsNumber of threshold violations for Frame Delivery.
FDRCL = fRCRPerDLCI / fTCLPerDLCI
For each sample, FDRCL is compared to the threshold configured on
object 'unitThresholdForFDR'. When FDRCL is less than the threshold,
this counter is incremented.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.26 |
rxFDRTimestampTimestamp of the last sample for delivery Entry statistics.
Each time the near end of the DLCI receives Delivery Ratio poll,
this number will contain the unit's current timestamp.
A timestamp is a 32-bit number representing the number of seconds
that have elapsed since 12:00AM, January 1, 1970.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.27 |
rxFDRNumberOfSamplesTakenNumber of samples taken for Frame Delivery Statistics.
Each time the near end receives the Frame Delivery Ratio poll,
this counter will be incremented.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.28 |
rxFDRNumberOfThresholdViolationsNumber of threshold violations for Frame Delivery.
FDRCR = fRCLPerDLCI / fTCRPerDLCI
For each sample, FDRCR is compared to the threshold configured
on object 'unitThresholdForFDR'. When FDRCR is less than the
threshold, this counter is incremented.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.29 |
txDDRTimestampTimestamp of the last sample for delivery Entry statistics.
Each time the near end of the DLCI receives Delivery Ratio Results
Information Field, this number will contain the unit's current
timestamp. A timestamp is a 32-bit number representing the number
of seconds that have elapsed since 12:00AM, January 1, 1970.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.30 |
txDDRNumberOfSamplesTakenNumber of samples taken for DataDelivery Statistics.
Each time the near end receives the Data Delivery Ratio Results
Information Field, this counter will be incremented.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.31 |
txDDRNumberOfThresholdViolationsNumber of threshold violations for Data Delivery.
DDRCL = dRCRPerDLCI / dTCLPerDLCI
For each sample, DDRCL is compared to the threshold configured
on object 'unitThresholdForDDR'. When DDRCL is less than the
threshold, this counter is incremented.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.32 |
rxDDRTimestampTimestamp of the last sample for delivery Entry statistics.
Each time the near end of the DLCI receives Delivery Ratio poll,
this number will contain the unit's current timestamp.
A timestamp is a 32-bit number representing the number of seconds
that have elapsed since 12:00AM, January 1, 1970.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.33 |
rxDDRNumberOfSamplesTakenNumber of samples taken for Data Delivery Statistics.
Each time the near end receives the Data Delivery Ratio poll,
this counter will be incremented.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.34 |
rxDDRNumberOfThresholdViolationsNumber of threshold violations for Data Delivery.
DDRCR = dRCLPerDLCI / dTCRPerDLCI
For each sample, DDRCR is compared to the threshold configured
on object 'unitThresholdForDDR'. When DDRCR is less than the
threshold, this counter is incremented.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.35 |
txDiscardEligibleNumber of Discard Eligible counters transmitted at the near end.
This counter has the same value as object 'etherStatsFragments'
in RMON MIB (RFC 1757) for DTE port.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.36 |
rxDiscardEligibleNumber of Discard Eligible counters received by the near end.
This counter has the same value as object 'etherStatsFragments'
in RMON MIB (RFC 1757) for DCE portro Counter .1.3.6.1.4.1.300.260.2.1.1.1.37 |
txFECNNumber of FECN counters transmitted at the near end.
This counter has the same value as object 'etherStatsCollisions'
in RMON MIB (RFC 1757) for DTE port.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.38 |
rxFECNNumber of FECN counters received by the near end.
This counter has the same value as object 'etherStatsCollisions'
in RMON MIB (RFC 1757) for DCE port.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.39 |
txBECNNumber of BECN counters transmitted at the near end.
This counter has the same value as object 'etherStatsJabbers'
in RMON MIB (RFC 1757) for DTE port.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.40 |
rxBECNNumber of BECN counters received by the near end.
This counter has the same value as object 'etherStatsJabbers'
in RMON MIB (RFC 1757) for DCE port.ro Counter .1.3.6.1.4.1.300.260.2.1.1.1.41 |
dlcDelayStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.300.260.2.2 |
delayPerDLCITableDelay Table Per DLCI SEQUENCE OF DelayPerDLCIEntry .1.3.6.1.4.1.300.260.2.2.1 |
delayPerDLCIEntryAn entry in the Delay per DLCI table. DelayPerDLCIEntry .1.3.6.1.4.1.300.260.2.2.1.1 |
delayPerDLCITableIndexThe index of Delay Table, which is DLCI number.ro INTEGER .1.3.6.1.4.1.300.260.2.2.1.1.1 |
delayTableEncodedValueThis object represents the value of the whole row of the table.
If the table. The intent of object is to increase the efficiency
of retrieving the table. For each object value in this table,
which are all of Counter type, it will be represented with 4 bytes
of data. The byte order of the Counter value will be MSB ... LSB.
This object will contain the value of all objects on the table,
except 'delayPerDLCITableIndex'.ro OCTET STRING .1.3.6.1.4.1.300.260.2.2.1.1.2 |
delayTableTimestampTimestamp for Delay Table entry.
Each time the near end of the DLCI receives an OA&M message
containing a Frame Transfer Delay Information Field,
this number will contain the unit's current timestamp.
A timestamp is a 32-bit number representing the number
of seconds that have elapsed since 12:00AM, January 1, 1970.ro Counter .1.3.6.1.4.1.300.260.2.2.1.1.3 |
totalRoundTripDelayPerDLCISum of all the round trip delay measurements taken so far.ro Counter .1.3.6.1.4.1.300.260.2.2.1.1.4 |
maximumRoundTripDelayNSamplesPerDLCIMaximum Round Trip Delay in last n samples. N is 15.ro Counter .1.3.6.1.4.1.300.260.2.2.1.1.5 |
maximumRoundTripDelay2NSamplesPerDLCIMaximum Round Trip Delay in last 2N samples. N is 15.ro Counter .1.3.6.1.4.1.300.260.2.2.1.1.6 |
maximumRoundTripDelay4NSamplesPerDLCIMaximum Round Trip Delay in last 4n samples. N is 15.ro Counter .1.3.6.1.4.1.300.260.2.2.1.1.7 |
numberOfDelayMeasurementsPerDLCINumber of delay measurements per DLCI.
Each time the near end receives an OA&M message containing
a Frame Transfer Delay Information Field, this counter
will be incremented.ro Counter .1.3.6.1.4.1.300.260.2.2.1.1.8 |
delayNumberOfThresholdViolationsNumber of threshold violations on Delay measurement.
If an individual delay measurement on this DLCI is greater
than the threshold value configured in object
'thresholdForDelayMeasurementPerDLCI', this counter will be
incremented.ro Counter .1.3.6.1.4.1.300.260.2.2.1.1.9 |
dlcOutageStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.300.260.2.3 |
outagePerDLCITableOutage Table Per DLCI SEQUENCE OF OutagePerDLCIEntry .1.3.6.1.4.1.300.260.2.3.1 |
outagePerDLCIEntryAn entry in the Outage per DLCI table. OutagePerDLCIEntry .1.3.6.1.4.1.300.260.2.3.1.1 |
outageTableIndexIndex of Outage Table, which is the DLCI number.ro INTEGER .1.3.6.1.4.1.300.260.2.3.1.1.1 |
outageTableEncodedValueThis object represents the value of the whole row of the table.
If the table. The intent of object is to increase the efficiency
of retrieving the table. For each object value in this table,
which are all of Counter type, it will be represented with 4 bytes
of data. The byte order of the Counter value will be MSB ... LSB.
This object will contain the value of all objects on the table,
except 'outageTableIndex'.ro OCTET STRING .1.3.6.1.4.1.300.260.2.3.1.1.2 |
outageTableTimestampTimestamp of when this Outage Table entry last updated.
A timestamp is a 32-bit number representing the number
of seconds that have elapsed since 12:00AM, January 1, 1970.ro Counter .1.3.6.1.4.1.300.260.2.3.1.1.3 |
outageStatusro Enumeration .1.3.6.1.4.1.300.260.2.3.1.1.4 |
numberOfOutageCounterNumber of outages.ro Counter .1.3.6.1.4.1.300.260.2.3.1.1.5 |
periodOfOutagesThe sum total of how long the outages are.ro Counter .1.3.6.1.4.1.300.260.2.3.1.1.6 |
numberOfExcludedOutageCounterNumber of excluded outages.ro Counter .1.3.6.1.4.1.300.260.2.3.1.1.7 |
periodOfExcludedOutagesThe sum total of how long excluded outages are.ro Counter .1.3.6.1.4.1.300.260.2.3.1.1.8 |
outageTableLastTimestampThis object contains timestamp (in seconds) of the last
time 'outagePerDLCITable' is updated (changed).ro Counter .1.3.6.1.4.1.300.260.2.3.2 |