DHS3226-MIB
The Structure of Layer 2 Network Management Information for the D-Link enterprise.
Main OID:
swL2MgmtMIB.1.3.6.1.4.1.171.11.36.2
109
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
109 total| Object Name |
|---|
swL2MgmtMIBThe Structure of Layer 2 Network Management Information for the
D-Link enterprise. MODULE-IDENTITY .1.3.6.1.4.1.171.11.36.2 |
swL2BwMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.36.2.1 |
swL2BwMgmtFEPortUnitBandwidthIndicates the represented bandwidth for each unit if the counting type
is for Fast Ethernet ports.ro INTEGER .1.3.6.1.4.1.171.11.36.2.1.1 |
swL2BwMgmtGEPortUnitBandwidthIndicates the represented bandwidth for each unit if the counting type
is for Gigabit Ethernet ports.ro INTEGER .1.3.6.1.4.1.171.11.36.2.1.2 |
swL2IngrPortBwControl OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.36.2.1.3 |
swL2IngrPortBwCtrlTableA table that contains the current control information about the ingress
bandwidth of port SEQUENCE OF SwL2IngrPortBwCtrlEntry .1.3.6.1.4.1.171.11.36.2.1.3.3 |
swL2IngrPortBwCtrlEntryA list of information contained in swL2IngrPortBwCtrlTable. SwL2IngrPortBwCtrlEntry .1.3.6.1.4.1.171.11.36.2.1.3.3.1 |
swL2IngrPortBwCtrlPortIndicates the port to limit ingress bandwidth. INTEGER .1.3.6.1.4.1.171.11.36.2.1.3.3.1.1 |
swL2IngrPortBwCtrlPortCountTypeIndicates the counting type of port. All the regular ports have
the type fastEthernetPort, and the others have the type
gigabitEthernetPort. If counting type is fastEthernetPort, the
limited bandwidth will be that swL2IngrPortBwCtrlUnit times
swL2BwMgmtFEPortUnitBandwidth. If counting type is
gigabitEthernetPort, the limited bandwidth will be that
swL2IngrPortBwCtrlUnit times swL2BwMgmtGEPortUnitBandwidth.ro Enumeration .1.3.6.1.4.1.171.11.36.2.1.3.3.1.2 |
swL2IngrPortBwCtrlPortNwayStatusIndicates speed and duplex mode of port.ro Enumeration .1.3.6.1.4.1.171.11.36.2.1.3.3.1.3 |
swL2IngrPortBwCtrlUnitIndicates the current units for the limitation of ingress bandwidth
of port.rw INTEGER .1.3.6.1.4.1.171.11.36.2.1.3.3.1.4 |
swL2IngrPortBwCtrlRateIndicates the limitation of forwarding bandwidth in kilobyte. The value
should be that swL2IngrPortBwCtrlUnit times swL2BwMgmtFEPortUnitBandwidth,
if counting type is fastEthernetPort, or swL2BwMgmtGEPortUnitBandwidth, if
counting type is gigabitEthernetPort.ro INTEGER .1.3.6.1.4.1.171.11.36.2.1.3.3.1.5 |
swL2IngrPortBwCtrlStatusStatus of this entry. All the existed entries will return enabled(3). An entry
will be created if this object is set to enabled(3) and not existed.
If this object is set to disabled(2), this entry will be deleted.rw Enumeration .1.3.6.1.4.1.171.11.36.2.1.3.3.1.6 |
swL2EgressPortBwControl OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.36.2.1.4 |
swL2EgressPortBwCtrlTableA table that contains the current control information about the egress
bandwidth of port SEQUENCE OF SwL2EgressPortBwCtrlEntry .1.3.6.1.4.1.171.11.36.2.1.4.3 |
swL2EgressPortBwCtrlEntryA list of information contained in swL2EgressPortBwCtrlTable. SwL2EgressPortBwCtrlEntry .1.3.6.1.4.1.171.11.36.2.1.4.3.1 |
swL2EgressPortBwCtrlPortIndicates the port to limit egress bandwidth. INTEGER .1.3.6.1.4.1.171.11.36.2.1.4.3.1.1 |
swL2EgressPortBwCtrlPortCountTypeIndicates the counting type of port. All the regular ports have
the type fastEthernetPort, and the others have the type
gigabitEthernetPort. If counting type is fastEthernetPort, the
limited bandwidth will be that swL2EgressPortBwCtrlUnit times
swL2BwMgmtFEPortUnitBandwidth. If counting type is
gigabitEthernetPort, the limited bandwidth will be that
swL2EgressPortBwCtrlUnit times swL2BwMgmtGEPortUnitBandwidth.ro Enumeration .1.3.6.1.4.1.171.11.36.2.1.4.3.1.2 |
swL2EgressPortBwCtrlPortNwayStatusIndicates speed and duplex mode of port.ro Enumeration .1.3.6.1.4.1.171.11.36.2.1.4.3.1.3 |
swL2EgressPortBwCtrlUnitIndicates the current units for the limitation of egress bandwidth
of port.rw INTEGER .1.3.6.1.4.1.171.11.36.2.1.4.3.1.4 |
swL2EgressPortBwCtrlRateIndicates the limitation of forwarding bandwidth in kilobyte. The value
should be that swL2EgressPortBwCtrlUnit times swL2BwMgmtFEPortUnitBandwidth,
if counting type is fastEthernetPort, or swL2BwMgmtGEPortUnitBandwidth,
if counting type is gigabitEthernetPort.ro INTEGER .1.3.6.1.4.1.171.11.36.2.1.4.3.1.5 |
swL2EgressPortBwCtrlStatusStatus of this entry. All the existed entries will return enabled(3). An
entry will be created if this object is set to enabled(3) and not existed.
If this object is set to disabled(2), this entry will be deleted.rw Enumeration .1.3.6.1.4.1.171.11.36.2.1.4.3.1.6 |
swL2GrpAddrFltrModeIndicates the filtering mode for all ports.
In forwardAllGrpAddr(2) mode - forward all group address,
all frames destined for group MAC addresses are forwarded according
to the VLAN rules.
In forwardAllUnregGrpAddr(3) mode - forward all unregistered group addresses,
if the Group MAC Address Registration entries exist in the Multicast Table,
frames destined for the corresponding group MAC addresses will be forwarded,
only on ports identified in the member port set, which is identified by the
Port Bitmap. The Untagged Bitmap is also used to send tagged packets on the
member ports. On the other hand, if the Group MAC Address does not exist in
the Multicast Table, the filtering mechanism of forwardAllGrpAddr(2) mode is
used.
In filterAllUnregGrpAddr(4) mode - filter all unregistered group addresses,
frames destined for group MAC addresses are forwarded only if such forwarding
is explicity permitted by a Group Address entry in the Multicast Table. In
other words, if the Group MAC Address exists in the Multicast table, then the
packets are forwarded using the Port Bitmap and the Untagged Bitmap from
that entry. Otherwise, the packets are dropped.rw Enumeration .1.3.6.1.4.1.171.11.36.2.2 |
swL2CosMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.36.2.3 |
swL2CosScheduleMethodIndicates the scheduling mechanism for CoS queues.
In strict(2) mode - packet process will start from highest CoS queue for a given
port, then moves on to the next lower CoS queue while the
higher CoS queue is empty packet.
In roundRobin(3) mode - packet process will start from highest CoS queue for a given
port, then moves on to the next lower CoS queue after sending
swL2CosMaxPackets or when the higher CoS queue is empty packet.rw Enumeration .1.3.6.1.4.1.171.11.36.2.3.1 |
swL2CosControlTable SEQUENCE OF SwL2CosControlEntry .1.3.6.1.4.1.171.11.36.2.3.2 |
swL2CosControlEntryA list of information contained in swL2CosControlTable. SwL2CosControlEntry .1.3.6.1.4.1.171.11.36.2.3.2.1 |
swL2CosQueueIndexIndicates CoS Queue.ro INTEGER .1.3.6.1.4.1.171.11.36.2.3.2.1.1 |
swL2CosMaxPacketsIndicates maximum packet count for a CoS Queue. This object only takes effect at
roundRobin mode of swL2CosScheduleMethod.rw INTEGER .1.3.6.1.4.1.171.11.36.2.3.2.1.2 |
swL2CosMaxLatencyIndicates maximum allowable latency for packet transmission on a CoS Queue such
that the packets on this queue are not delayed more than the maximum allowable
latency time. The granularity of this timer is 17 microsecond. A value of 0x00
disable this timer. swL2CosMaxLatency takes precedence over swL2CosScheduleMethod.rw INTEGER .1.3.6.1.4.1.171.11.36.2.3.2.1.3 |
swL2PortSecurityMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.36.2.4 |
swL2PortSecurityControlTableport security feature which controls the address leaning capability and the
traffic forwarding decision. Each port can have this function enabled or disabled.
When it is enabled and a number is given said N, which allows N addresses to be
learned at this port, the first N learned addresses are locked at this port as
static entry. When the learned addresses number reach N, any coming packet with
not learned source addresses are discarded (e.g. dropped) and no more new addresses
can be learned at this port. SEQUENCE OF SwL2PortSecurityControlEntry .1.3.6.1.4.1.171.11.36.2.4.1 |
swL2PortSecurityControlEntryA list of information contained in swL2PortSecurityControlTable. SwL2PortSecurityControlEntry .1.3.6.1.4.1.171.11.36.2.4.1.1 |
swL2PortSecurityPortIndexIndicates the secured port to lock address learning.ro INTEGER .1.3.6.1.4.1.171.11.36.2.4.1.1.1 |
swL2PortSecurityMaxLernAddrIndicates allowable number of addresses to be learned at this port.rw INTEGER .1.3.6.1.4.1.171.11.36.2.4.1.1.2 |
swL2PortSecurityModeIndicates the mode of locking address.
In deleteOnTimeout(2) mode - the locked addresses can be aged out after aging timer
expire. In this mode, when the locked address is aged
out, the number of address can be learned has to be
increased by one.
In deleteOnReset(3) mode - never age out the locked addresses unless restart
the system to prevent from port movement or intrusion.rw Enumeration .1.3.6.1.4.1.171.11.36.2.4.1.1.3 |
swL2PortSecurityAdmStateIndicates administration state of locking address.rw Enumeration .1.3.6.1.4.1.171.11.36.2.4.1.1.4 |
swL2DevMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.36.2.5 |
swL2DevInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.36.2.5.1 |
swL2DevInfoSystemUpTimeThe value of sysUpTime at the time the switch entered its
current operational state. If the current state was entered
prior to the last re-initialization, then this object contains
a zero value. This value is in units of seconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.11.36.2.5.1.1 |
swL2DevInfoTotalNumOfPortThe number of ports within this switch. This value is the sum
of the ports within this switch.ro INTEGER .1.3.6.1.4.1.171.11.36.2.5.1.2 |
swL2DevInfoNumOfPortInUseThe number of ports in this switch connected to the segment or
the end stations.ro INTEGER .1.3.6.1.4.1.171.11.36.2.5.1.3 |
swL2DevInfoConsoleInUseThis usage indication of console system.ro Enumeration .1.3.6.1.4.1.171.11.36.2.5.1.4 |
swL2DevInfoFrontPanelLedStatusThis object is a set of system LED indications. The first third octets
is defined as system LED . The first LED is power LED . The second LED
is console LED . The third LED is RPS (Redundancy Power Supply) LED .
. The other octets following the third octets are the logical port LED
(following dot1dBasePort ordering) . Every two bytes are presented to a
port. The first byte is presentd to the Link/Activity LED . The second
byte is presented to the Speed LED .
There is one byte per LED .
The most significant bit is used for blink/solid:
Off = The LED is lit permanently.
On = The LED blinks.
The three least significant bits are used for color:
1 = not lit,
2 = green,
3 = yellow,(orange)
4 = blue,
5 = red,
0+6+7 not used
The four remaining bits are currently unused and must be 0 .ro OCTET STRING .1.3.6.1.4.1.171.11.36.2.5.1.5 |
swL2DevInfoCpuUtilizationThis object indicates CPU utilizationro INTEGER .1.3.6.1.4.1.171.11.36.2.5.1.6 |
swL2DevCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.36.2.5.2 |
swL2DevCtrlSystemRebootThis object indicates the agent system reboot state. The agent always
returns other(1) when this object is read.rw Enumeration .1.3.6.1.4.1.171.11.36.2.5.2.1 |
swL2DevCtrlSystemIPThis object indicates system ip.rw IpAddress .1.3.6.1.4.1.171.11.36.2.5.2.2 |
swL2DevCtrlSubnetMaskThis object indicates system subnet mask.rw IpAddress .1.3.6.1.4.1.171.11.36.2.5.2.3 |
swL2DevCtrlDefaultGatewayThis object indicates system default gateway.rw IpAddress .1.3.6.1.4.1.171.11.36.2.5.2.4 |
swL2DevCtrlManagementVlanIdThis object controls which Vlan includes system ip. And the Vlan
should have been created.rw VlanId .1.3.6.1.4.1.171.11.36.2.5.2.5 |
swL2DevCtrlStpStateThis object can be enabled or disabled spanning tree algorithm
during runtime of the system.rw Enumeration .1.3.6.1.4.1.171.11.36.2.5.2.6 |
swL2DevCtrlIGMPSnoopingThis object indicates layer 2 Internet Group Management Protocol
(IGMP) capture function is enabled or disabled .rw Enumeration .1.3.6.1.4.1.171.11.36.2.5.2.7 |
swL2DevCtrlBcastStormCtrlThis object indicates broadcast storm control function is enabled or
disabled. The swL2PortCtrlBMDStormLimit object will descript the
detail about the storm control .rw Enumeration .1.3.6.1.4.1.171.11.36.2.5.2.8 |
swL2DevCtrlMcastStormCtrlThis object indicates multicast storm control function is enabled or
disabled. The swL2PortCtrlBMDStormLimit object will descript the
detail about the storm control .rw Enumeration .1.3.6.1.4.1.171.11.36.2.5.2.9 |
swL2DevCtrlDestLookupFailureCtrlThis object indicates destination lookup failure rate control function
is enabled or disabled. The swL2PortCtrlBMDStormLimit object will
descript the detail about the storm control .rw Enumeration .1.3.6.1.4.1.171.11.36.2.5.2.10 |
swL2DevCtrlBMDStormLimitThis object to decide how many broadcast/multicast (depend on
swL2DevCtrlBcastStormCtrl, swL2DevCtrlMcastStormCtrl or
swL2DevCtrlDestLookupFailureCtrlobjects whether is enabled) packets per second
will pass thru. Beyond the limit, the device will start dropping
that type of packet until the second interval has expired . Once the time
interval has expired , the device will start forwarding that type of packet.rw INTEGER .1.3.6.1.4.1.171.11.36.2.5.2.11 |
swL2DevCtrlCleanAllStatisticCounterAs the object is set to active, all the statistic counters will be cleared.
If set to normal, do nothing.rw Enumeration .1.3.6.1.4.1.171.11.36.2.5.2.12 |
swL2DevCtrlSnmpEnableAuthenTrapsIndicates whether the SNMP entity is permitted to generate
authenticationFailure traps. The value of this object
overrides any configuration information; as such, it
provides a means whereby all authenticationFailure traps may
be disabled.
Note that it is strongly recommended that this object be
stored in non-volatile memory so that it remains constant
across re-initializations of the network management system.rw Enumeration .1.3.6.1.4.1.171.11.36.2.5.2.13 |
swL2DevCtrlFilterEAPOLPDUIndicates whether to filter the EAPOL PDU. If the administrative
state for Port Access Control in a System is enabled, this object
is meaningless. Otherwise, when this object is yes(1), the EAPOL
packets will be dropped. When this object is no(2), the EAPOL
packets will pass.rw Enumeration .1.3.6.1.4.1.171.11.36.2.5.2.14 |
swL2DevCtrlTrafficSegmentationIf this object is disabled(2), then no traffic segmentation.
When we set it to enabled(1), there are three conditions for the
traffic segmentation.
(1) If without plugging in option module, port 1 is the server port.
(2) If plugging in one-port module, the port on the module is the
server port.
(3) If plugging in two-port module, these two ports on the module are
the server ports.
Under this situation, other ports(Client ports) can only communicate
with the server port. Client ports can't communicate with each other.rw Enumeration .1.3.6.1.4.1.171.11.36.2.5.2.15 |
agentPingTest OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.36.2.5.2.16 |
agentPingTestIPAddressThe target ip address of the ping testrw IpAddress .1.3.6.1.4.1.171.11.36.2.5.2.16.1 |
agentPingTestRepetitionThe repetition times of the ping testrw INTEGER .1.3.6.1.4.1.171.11.36.2.5.2.16.2 |
agentPingTestControlTo control the device to start ping or stop pingrw Enumeration .1.3.6.1.4.1.171.11.36.2.5.2.16.3 |
agentPingTestStatusThe state of the ping test, proceeding means the ping test is going on,
and finish means the ping test is finishedro Enumeration .1.3.6.1.4.1.171.11.36.2.5.2.16.4 |
agentPingTestSuccessCountThe success times of the ping test.ro INTEGER .1.3.6.1.4.1.171.11.36.2.5.2.16.5 |
agentPingTestFailCountThe fail times of the ping test.ro INTEGER .1.3.6.1.4.1.171.11.36.2.5.2.16.6 |
swL2DevCtrlVlanIdOfFDBTblIndicates the VLAN ID which the Dot1dTpFdbTable belongs to ;
The default value is DEFAULT_VLAN_ID of system .rw VlanId .1.3.6.1.4.1.171.11.36.2.5.2.17 |
swL2PortMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.36.2.6 |
swL2PortInfoTableA table that contains information about every port. SEQUENCE OF SwL2PortInfoEntry .1.3.6.1.4.1.171.11.36.2.6.1 |
swL2PortInfoEntryA list of information for each port of the device. SwL2PortInfoEntry .1.3.6.1.4.1.171.11.36.2.6.1.1 |
swL2PortInfoPortIndexThis object indicates the module's port number.(1..Max port number in
the module)ro INTEGER .1.3.6.1.4.1.171.11.36.2.6.1.1.1 |
swL2PortInfoTypeThis object indicates the connector type of this port.ro Enumeration .1.3.6.1.4.1.171.11.36.2.6.1.1.2 |
swL2PortInfoDescrProvides port type information in displayed string formatro DisplayString .1.3.6.1.4.1.171.11.36.2.6.1.1.3 |
swL2PortInfoLinkStatusThis object indicates the port link status.ro Enumeration .1.3.6.1.4.1.171.11.36.2.6.1.1.4 |
swL2PortInfoNwayStatusThis object indicates the port speed and duplex mode.ro Enumeration .1.3.6.1.4.1.171.11.36.2.6.1.1.5 |
swL2PortCtrlTableA table that contains control information about every port. SEQUENCE OF SwL2PortCtrlEntry .1.3.6.1.4.1.171.11.36.2.6.2 |
swL2PortCtrlEntryA list of control information for each port of the device. SwL2PortCtrlEntry .1.3.6.1.4.1.171.11.36.2.6.2.1 |
swL2PortCtrlPortIndexThis object indicates the module's port number.(1..Max port number in
the module)ro INTEGER .1.3.6.1.4.1.171.11.36.2.6.2.1.1 |
swL2PortCtrlAdminStateThis object decide the port enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.11.36.2.6.2.1.2 |
swL2PortCtrlNwayStateChose the port speed, duplex mode, and N-Way function mode.rw Enumeration .1.3.6.1.4.1.171.11.36.2.6.2.1.3 |
swL2PortCtrlFlowCtrlStateSet flow control function as enabled or disabled.rw Enumeration .1.3.6.1.4.1.171.11.36.2.6.2.1.4 |
swL2PortCtrlCleanStatCounterAs the object is set to active, the statistic counters of this port will be
cleared. If set to normal, do nothing.rw Enumeration .1.3.6.1.4.1.171.11.36.2.6.2.1.5 |
swL2PortCtrlDescriptionSet port description in displayed string format.rw DisplayString .1.3.6.1.4.1.171.11.36.2.6.2.1.6 |
swL2DiffServMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.36.2.7 |
swL2DiffServTypeCtrlTableA table that contains Differentiated Service(DiffServ) type information of each port. SEQUENCE OF SwL2DiffServTypeCtrlEntry .1.3.6.1.4.1.171.11.36.2.7.1 |
swL2DiffServTypeCtrlEntryA list of DiffServ type information for each port of the device. SwL2DiffServTypeCtrlEntry .1.3.6.1.4.1.171.11.36.2.7.1.1 |
swL2DiffServTypeCtrlPortIndexThis object indicates the module's port number.(1..Max port number in
the module)ro INTEGER .1.3.6.1.4.1.171.11.36.2.7.1.1.1 |
swL2DiffServTypeCtrlDiffServTypeThe DiffServ type of this port.
disabled(1)
dscp(2)
swL2DiffServDSCPCtrlTable will take effect for the replacement of
DSCP(DiffServ codepoint) field.
tos(3)
swL2DiffServTOSCtrlTable will take effect for the relationship of
replacement between IP TOS precedence and 802.1p tag control
priority field.rw Enumeration .1.3.6.1.4.1.171.11.36.2.7.1.1.2 |
swL2DiffServDSCPCtrlTableA table that contains DSCP (Differentiated Service Code Point) control
information. SEQUENCE OF SwL2DiffServDSCPCtrlEntry .1.3.6.1.4.1.171.11.36.2.7.2 |
swL2DiffServDSCPCtrlEntryA list of DSCP control information for each port. SwL2DiffServDSCPCtrlEntry .1.3.6.1.4.1.171.11.36.2.7.2.1 |
swL2DiffServDSCPCtrlPortIndexThis object indicates the module's port number.(1..Max port number in
the module)ro INTEGER .1.3.6.1.4.1.171.11.36.2.7.2.1.1 |
swL2DiffServDSCPCtrlModeThe DSCP mode of this port.
dscp-Force-Overwrite(1)
value regardless of the DSCP of the incoming packet.
dscp-Change-If-Zero(2)
value if the DSCP of the incoming packet is zero.rw Enumeration .1.3.6.1.4.1.171.11.36.2.7.2.1.2 |
swL2DiffServDSCPCtrlValueThe DSCP value of this port.rw INTEGER .1.3.6.1.4.1.171.11.36.2.7.2.1.3 |
swL2DiffServTOSCtrlTableA table that contains TOS (Type Of Service) control
information. SEQUENCE OF SwL2DiffServTOSCtrlEntry .1.3.6.1.4.1.171.11.36.2.7.3 |
swL2DiffServTOSCtrlEntryA list of TOS control information for each port. SwL2DiffServTOSCtrlEntry .1.3.6.1.4.1.171.11.36.2.7.3.1 |
swL2DiffServTOSCtrlPortIndexThis object indicates the module's port number.(1..Max port number in
the module)ro INTEGER .1.3.6.1.4.1.171.11.36.2.7.3.1.1 |
swL2DiffServTOSCtrlModeThe TOS mode of this port.
tos-Force-Overwrite(1)
tos-TOS-Overwrite-802dot1p(2)
tag control priority field to the value in IP TOS precedence
field.
tos-802dot1p-Overwrite-TOS(3)
is changed to the value in the 802.1p tag control priority
field.rw Enumeration .1.3.6.1.4.1.171.11.36.2.7.3.1.2 |
swL2DiffServTOSCtrlValuethis object is used only if swL2DiffServTOSCtrlMode is tos-Force-Overwrite(1)rw INTEGER .1.3.6.1.4.1.171.11.36.2.7.3.1.3 |
swL2PortMirrorMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.11.36.2.8 |
swL2PortMirrorSrcPortTableA list of port snooping entries.Port mirroring function provides an easy
way to monitor traffic on any port. In this way any good packets appears
on the source mirror port also shows up on the target mirror port and
doesn't to reconstruct the LAN. SEQUENCE OF SwL2PortMirrorSrcPortEntry .1.3.6.1.4.1.171.11.36.2.8.1 |
swL2PortMirrorSrcPortEntryA list of information provide an easy way to monitor traffic on any port.
The use can bring a fancy network monitor attaching to any target mirror
port and set the port to be monitored as source mirror port. SwL2PortMirrorSrcPortEntry .1.3.6.1.4.1.171.11.36.2.8.1.1 |
swL2PortMirrorIndexThis object indicates the number of port to be sniffed. The port number
is the sequential (logical) number which is also applied to bridge MIB,
etc.ro Integer32 .1.3.6.1.4.1.171.11.36.2.8.1.1.1 |
swL2PortMirrorDirectionThis object uses to setup what packets will be mirrored.rw Enumeration .1.3.6.1.4.1.171.11.36.2.8.1.1.2 |
swL2PortMirrorTargetPortThis object indicates switch which port will sniff another port.
A trunk port member cannot be configured as a target Snooping port.
The port number is the sequential (logical) number which is also
applied to bridge MIB, etc.rw Integer32 .1.3.6.1.4.1.171.11.36.2.8.2 |
swL2PortMirrorStateThis object indicates the mirror status.rw Enumeration .1.3.6.1.4.1.171.11.36.2.8.3 |
swL2Property OBJECT IDENTIFIER .dlink-Dhs3226Prod.1 |
swL2Module OBJECT IDENTIFIER .dlink-Dhs3226Prod.1.1 |