DEPNODE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for DEPNODE-MIB.
26
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
26 total| Object Name |
|---|
ibm OBJECT IDENTIFIER .1.3.6.1.4.1.2 |
IMPORTS Unknown .1.3.6.1.4.1.2 |
ibmProd OBJECT IDENTIFIER .1.3.6.1.4.1.2.6 |
ibmSP OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.117 |
ibmSPDepNode OBJECT IDENTIFIER .1.3.6.1.4.1.2.6.117.4 |
switchInfoNeededA switchInfoNeeded trap signifies that the sending
protocol entity needs SP switch configuration
information for a dependent secondary node within
the sender's configuration. TRAP-TYPE .1.3.6.1.4.1.2.6.117.4.0.1 |
switchConfigStateA switchConfigState trap indicates the final
configuration state of a dependent secondary node's
SP switch interface. TRAP-TYPE .1.3.6.1.4.1.2.6.117.4.0.2 |
switchNodeUpA switchNodeUp trap indicates that a dependent
secondary node in the sender's configuration has
just been reinitialized or reconfigured and is able
to handle SP Switch Manager protocol messages. TRAP-TYPE .1.3.6.1.4.1.2.6.117.4.0.3 |
switchNodeDownA switchNodeDown trap indicates that a dependent
secondary node in the sender's configuration
is no longer able to handle Switch Manager protocol
messages on the switch network. TRAP-TYPE .1.3.6.1.4.1.2.6.117.4.0.4 |
ibmSPDepNodeTableThis entity's table of dependent secondary nodes
attached to IBM SP switch networks. SEQUENCE OF IbmSPDepNodeEntry .1.3.6.1.4.1.2.6.117.4.1 |
ibmSPDepNodeEntryConfiguration information for a dependent
secondary node on SP switch network. IbmSPDepNodeEntry .1.3.6.1.4.1.2.6.117.4.1.1 |
ibmSPDepNodeNameIdentifier assigned to this node in its
system's administrative environment.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.117.4.1.1.1 |
ibmSPDepNodeNumberRelative node number assigned to this node in the SP system.
Note that this is distinct from switch node number.rw INTEGER .1.3.6.1.4.1.2.6.117.4.1.1.2 |
ibmSPDepSwTokenOpaque correlator assigned in the SP system
for this node's switch connection.rw OCTET STRING .1.3.6.1.4.1.2.6.117.4.1.1.3 |
ibmSPDepSwARPIndicates whether ARP is enabled for the partition
of the switch network that contains the associated
dependent secondary node.
NOTE: An SNMP Agent may be responsible for switch
nodes in several SP system partitions, and ARP
may be enabled in none, some, or all of the partitions.
A value of disabled(1) indicates that ARP is
not to be used to resolve network protocol
addresses to switch node numbers for the switch
network. Instead, the mapping of IP addresses
to switch node numbers is determined via the
algorithm in the description of ibmSPDepIPHostOffset.
A value of enabled(2) indicates that ARP is
to be used to resolve network protocol
addresses to switch node numbers for the switch
network.rw Enumeration .1.3.6.1.4.1.2.6.117.4.1.1.4 |
ibmSPDepSwNodeNumberThe switch node number of the associated SP switch
interface. In common networking terminology,
this is the physical address for the interface
on the SP switch network, and is also called
the Node Device ID in the SP dependent node
architecture.rw INTEGER .1.3.6.1.4.1.2.6.117.4.1.1.5 |
ibmSPDepIPaddrThe IP address for the associated SP switch interface.rw IpAddress .1.3.6.1.4.1.2.6.117.4.1.1.6 |
ibmSPDepNetMaskThe subnet mask associated with the IP address of
this entry. The value of the mask is an IP
address with all the network bits set to 1 and all
the host bits set to 0.rw IpAddress .1.3.6.1.4.1.2.6.117.4.1.1.7 |
ibmSPDepIPMaxLinkPktThe maximum number of bytes in the data portion of
link-layer packets for IP datagrams on the
SP switch network.rw INTEGER .1.3.6.1.4.1.2.6.117.4.1.1.8 |
ibmSPDepIPHostOffsetThis value is the difference between switch node
numbers and the host portion of the corresponding
IP addresses when ARP is disabled on the SP switch
network. It is the value to subtract from the
host portion of an IP address to calculate the
corresponding switch node number.rw INTEGER .1.3.6.1.4.1.2.6.117.4.1.1.9 |
ibmSPDepConfigStateThis value indicates the final configuration state
of the corresponding SP switch interface.ro Enumeration .1.3.6.1.4.1.2.6.117.4.1.1.10 |
ibmSPDepSysNameThe fully-qualified domain name of the SP system
partition that contains this dependent node. This
name is administratively assigned in the SP system.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2.6.117.4.1.1.11 |
ibmSPDepNodeStateThis value indicates the state of the dependent
node with respect to its capability to handle
Switch Manager protocol via its SP switch interface.
A value of nodeUp(1) indicates that the node has
been reinitialized or reconfigured sufficiently
to handle the Switch Manager protocol to unfence
the node if it were previously fenced from the
SP switch network.
A value of nodeDown(2) indicates that the node is
no longer able to handle Switch Manager protocol
messages on the SP switch network.ro Enumeration .1.3.6.1.4.1.2.6.117.4.1.1.12 |
ibmSPDepSwChipLinkThe send port number for packets from the
adjacent switch chip to the dependent node.
The dependent node needs this value to build
the packet that it sends to the adjacent
switch chip to trigger that chip to reply
with a clock synchronization packet.rw INTEGER .1.3.6.1.4.1.2.6.117.4.1.1.13 |
ibmSPDepNodeDelayThis value is an estimate of how many clock
cycles elapse before a clock synchronization packet
sent from the adjacent switch chip to the dependent node
results in loading of the switch time-of-day register
for the node.
The dependent node needs this value to build
the packet that it sends to the adjacent
switch chip to trigger that chip to reply with
a clock synchronization packet.rw INTEGER .1.3.6.1.4.1.2.6.117.4.1.1.14 |
ibmSPDepAdminStatusThis value indicates the desired state of the dependent
node with respect to its capability to handle
Switch Manager protocol via its SP switch interface.
If the dependent node is not in the desired state,
then the SNMP Agent triggers actions to change its state
to the desired state.
A value of up(1) indicates that the node should be
initialized and configured sufficiently
to handle the Switch Manager protocol.
A value of down(2) indicates that the node should be
reset such that it is not able to receive and handle
Switch Manager protocol messages on the SP switch
network.
A value of reconfigure(3) indicates that the SNMP Agent
must send the switchInfoNeeded trap to request new SP
switch configuration information for the dependent
node. This causes the SNMP Manager to send the
new configuration information for the dependent node
MIB objects via set-request PDU(s).
Once the new values are set by the SNMP Manager,
the SNMP Agent reinitializes and reconfigures the dependent
node sufficiently to handle the Switch Manager protocol.rw Enumeration .1.3.6.1.4.1.2.6.117.4.1.1.15 |