DELLRCSG2-TRAP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for DELLRCSG2-TRAP-MIB.
121
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
121 total| Object Name |
|---|
dell OBJECT IDENTIFIER .1.3.6.1.4.1.10418 |
RFC1155-SMI Unknown .1.3.6.1.4.1.10418 |
dellrcsg2 OBJECT IDENTIFIER .1.3.6.1.4.1.10418.18 |
dellrcsg2Products OBJECT IDENTIFIER .1.3.6.1.4.1.10418.18.21 |
dellrcsg2RebootStartedTrapThe RCS is in the process of rebooting.
The name of the user who initiated the reboot
is contained in dellrcsg2TrapObjectUserName. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.1 |
dellrcsg2UserLoginTrapA user logged into the RCS.
The name of the user who logged in
is contained in dellrcsg2TrapObjectUserName. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.2 |
dellrcsg2UserLogoutTrapA user logged out of the RCS.
The name of the user who logged out is contained
in dellrcsg2TrapObjectUserName. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.3 |
dellrcsg2TargetSessionStartedTrapA target session has started. This may be a serial or KVM
session, depending on the type of target.
The name of the user who is connected to the session
is contained in dellrcsg2TrapObjectUserName.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
The user address is contained in
dellrcsg2TrapObjectUserAddress.
The session type is contained in
dellrcsg2TrapObjectSessionType. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.4 |
dellrcsg2TargetSessionStoppedTrapA target session has stoppped. This may be a serial or KVM
session, depending on the type of target.
The name of the user who was connected to the session
is contained in dellrcsg2TrapObjectUserName.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
The user address is contained in
dellrcsg2TrapObjectUserAddress.
The session type is contained in
dellrcsg2TrapObjectSessionType. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.5 |
dellrcsg2TargetSessionTerminatedTrapA target session has been terminated by another
user. This may be a serial or KVM session, depending on the
type of target.
The name of the user who terminated the session is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available.
The name of the user who was terminated from the session
is contained in dellrcsg2TrapObjectTargetUserName.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
The user address is contained in
dellrcsg2TrapObjectUserAddress.
The session type is contained in
dellrcsg2TrapObjectSessionType. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.6 |
dellrcsg2LocalPortSessionStartedTrapA local port target session has started.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
This Trap is deprecated and is no longer used. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.7 |
dellrcsg2LocalPortSessionStoppedTrapA local port target session has stopped.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
This Trap is deprecated and is no longer used. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.8 |
dellrcsg2LocalPortSessionTerminatedTrapA local port target session has been terminated by another
user.
The name of the user who terminated the session is
contained in dellrcsg2TrapObjectUserName.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
This Trap is deprecated and is no longer used. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.9 |
dellrcsg2ImageFileUpgradeStartedThe RCS has started an image upgrade.
The name of the user who originally started the image upgrade is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available.
The URL of the file that was loaded is contained in
dellrcsg2TrapObjectFileName.
The version of the image that the RCS is upgrading to is
contained in dellrcsg2TrapObjectImageNewVersion.
The version of the image that the RCS is currently running
is contained in dellrcsg2TrapObjectImageCurrentVersion. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.10 |
dellrcsg2ImageFileUpgradeResultsTrapThe result of an image upgrade. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.11 |
dellrcsg2UserAddedTrapA new user has been added to the local user database.
The name of the user who added the new user is contained
in dellrcsg2TrapObjectUserName.
The name of the new user is contained in
dellrcsg2TrapObjectTargetUserName. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.12 |
dellrcsg2UserDeletedTrapA user has been deleted from the local user database.
The name of the user who deleted the user is contained
in dellrcsg2TrapObjectUserName.
The name of the user who was deleted is contained
in dellrcsg2TrapObjectTargetUserName. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.13 |
dellrcsg2UserModifiedTrapA user was modified.
The name of the user who modified the user is contained
in dellrcsg2TrapObjectUserName.
The name of the user who was modified is contained
in dellrcsg2TrapObjectTargetUserName. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.14 |
dellrcsg2UserLockedTrapA user account has been locked.
The name of the user who was locked is contained
in dellrcsg2TrapObjectTargetUserName.
The reason for which the user account has been locked is contained
in dellrcsg2TrapObjectLockReason. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.15 |
dellrcsg2UserUnlockedTrapA user account has been unlocked.
The name of the user who unlocked the user is contained
in dellrcsg2TrapObjectUserName. When the user account is unlocked
by a RCS reboot or by the expiration of the lockout period
(as specified in the dellrcsg2TrapObjectUnlockReason object), the
name of the user will be blank.
The name of the user who was unlocked is contained
in dellrcsg2TrapObjectTargetUserName.
The reason for which the user account has been unlocked is contained
in dellrcsg2TrapObjectUnlockReason. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.16 |
dellrcsg2UserAuthenticationFailureTrapA user failed to authenticate with the RCS.
The name of the user who failed to authenticate
is contained in dellrcsg2TrapObjectUserName. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.17 |
dellrcsg2SIPAddedTrapA SIP was added. The ID of the SIP which was added is
contained in dellrcsg2TrapObjectSIPId. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.18 |
dellrcsg2SIPRemovedTrapA SIP was removed. The ID of the SIP which was removed is
contained in dellrcsg2TrapObjectSIPId. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.19 |
dellrcsg2SIPMovedTrapA SIP was moved.
The ID of the SIP which was moved is contained in dellrcsg2TrapObjectSIPId.
The name of the target device attached to the SIP is contained in
dellrcsg2TrapObjectTargetDeviceName.
The input port number on the RCS that the SIP is now
connected to is contained in dellrcsg2TrapObjectInputPort.
The input port number on the RCS that the SIP
was previously connected to is contained in
dellrcsg2TrapObjectOldInputPort. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.20 |
dellrcsg2TargetDeviceNameChangedTrapThe name of a server has changed.
The previous name of the server is contained in
dellrcsg2TrapObjectOldTargetDeviceName.
The new name of the server is contained in
dellrcsg2TrapObjectTargetDeviceName.
The ID of the SIP the server is attached to is
contained in dellrcsg2TrapObjectSIPId. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.21 |
dellrcsg2TieredSwitchAddedTrapA tiered switch was added. The name of the switch
which was added is contained in dellrcsg2TrapObjectTieredSwitchName.
The ID of the SIP the switch was added to is contained
in dellrcsg2TrapObjectSIPId. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.22 |
dellrcsg2TieredSwitchRemovedTrapA tiered switch was removed. The name of the switch
which was removed is contained in
dellrcsg2TrapObjectTieredSwitchName.
The ID of the SIP the switch was attached to is contained
in dellrcsg2TrapObjectSIPId. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.23 |
dellrcsg2TieredSwitchNameChangedTrapThe name of a tiered switch has changed.
The previous name of the tiered switch is contained in
dellrcsg2TrapObjectOldTieredSwitchName.
The new name of the tiered switch is contained in
dellrcsg2TrapObjectTieredSwitchName.
The ID of the SIP the switch is attached to is contained
in dellrcsg2TrapObjectSIPId. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.24 |
dellrcsg2ConfigurationFileLoadedTrapThe RCS has loaded a configuration file.
The name of the user who commanded the RCS to
load the configuration file is contained in
dellrcsg2TrapObjectUserName.
The URL of the file that was loaded is contained in
dellrcsg2TrapObjectFileName. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.25 |
dellrcsg2UserDatabaseFileLoadedTrapThe RCS has loaded a user database file.
The name of the user who commanded the RCS to
load the user database file is contained in
dellrcsg2TrapObjectUserName.
The URL of the file that was loaded is contained in
dellrcsg2TrapObjectFileName. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.26 |
dellrcsg2CaCertificateLoadedA user has loaded a new CA Certificate in the RCS.
The name of the user who loaded the certificate is
contained in dellrcsg2TrapObjectUserName. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.27 |
dellrcsg2SIPImageUpgradeStartedA software image upgrade has started on a SIP.
The name of the user who originally started the image upgrade is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available.
The type of software image being upgraded is contained in
dellrcsg2TrapObjectSIPTypeOfImage.
The software image version the SIP is upgrading to is
contained in dellrcsg2TrapObjectImageNewVersion.
The software image version the SIP is currently running
is contained in dellrcsg2TrapObjectImageCurrentVersion.
The name of the server connected to the SIP being upgraded is
contained in dellrcsg2TrapObjectTargetDeviceName.
The ID of the SIP being upgraded is contained in
dellrcsg2TrapObjectSIPId TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.28 |
dellrcsg2SIPImageUpgradeResultTrapThe result of a SIP software image upgrade.
The image upgrade result is contained in
dellrcsg2TrapObjectSIPImageUpgradeResult.
The name of the user who originally started the image upgrade is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available.
The type of software image the upgrade result is for is contained in
dellrcsg2TrapObjectTypeOfImage.
The software image version the SIP attempted to upgrade to
is contained in dellrcsg2TrapObjectImageNewVersion.
The software image version the SIP is running is contained
in dellrcsg2TrapObjectImageCurrentVersion. If the software image
upgrade was successful then this version will match the version
reported in dellrcsg2TrapObjectImageNewVersion.
The name of the server connected to the SIP is
contained in dellrcsg2TrapObjectTargetDeviceName.
The ID of the SIP the result is for is contained in
dellrcsg2TrapObjectSIPId. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.29 |
dellrcsg2SIPRestartedTrapA SIP has restarted. A SIP will restart after
a SIP image upgrade completes.
The name of the server connected to the SIP is
contained in dellrcsg2TrapObjectTargetDeviceName.
The ID of the SIP that restarted is for is contained in
dellrcsg2TrapObjectSIPId. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.30 |
dellrcsg2VirtualMediaSessionStartedTrapA Virtual Media session to a server has started. A target
session to the server must have been established by the same user
prior to starting the VM session.
The name of the user who connected to the VM session
is contained in dellrcsg2TrapObjectUserName.
The name of the server the user connected to is contained in
dellrcsg2TrapObjectTargetDeviceName.
The ID of the SIP the target session is using is contained in
dellrcsg2TrapObjectSIPId.
The user address is contained in
dellrcsg2TrapObjectUserAddress. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.31 |
dellrcsg2VirtualMediaSessionStoppedTrapA virtual media session to a server has stopped.
The name of the user who was connected to the VM session
is contained in dellrcsg2TrapObjectUserName.
The name of the server the user was connected to is contained in
dellrcsg2TrapObjectTargetDeviceName.
The user address is contained in
dellrcsg2TrapObjectUserAddress. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.32 |
dellrcsg2VirtualMediaSessionTerminatedTrapA virtual media session has been terminated or preempted
by another user.
The name of the user who terminated or preempted the VM session is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available. A user
name will not be available if a remote session was terminated
or preempted from the OSCAR interface and OSCAR authentication is
disabled.
The name of the user who was terminated or preempted from the VM
session is contained in dellrcsg2TrapObjectTargetUserName.
The name of the server the user was connected to contained in
dellrcsg2TrapObjectTargetDeviceName.
The user address is contained in
dellrcsg2TrapObjectUserAddress. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.33 |
dellrcsg2VirtualMediaSessionReservedTrapA user established a reserved virtual media session.
The name of the user who has established a reserved virtual media session
is contained in dellrcsg2TrapObjectUserName.
The name of the server the user was connected to is contained in
dellrcsg2TrapObjectTargetDeviceName.
The user address is contained in
dellrcsg2TrapObjectUserAddress. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.34 |
dellrcsg2VirtualMediaSessionUnreservedTrapA user established a non-reserved virtual media session.
The name of the user who has established a non-reserved virtual media session
is contained in dellrcsg2TrapObjectUserName.
The name of the server the user was connected to is contained in
dellrcsg2TrapObjectTargetDeviceName.
The user address is contained in
dellrcsg2TrapObjectUserAddress. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.35 |
dellrcsg2VirtualMediaDriveMappedA virtual media drive has been mapped.
The name of the user who has established the virtual media session
is contained in dellrcsg2TrapObjectUserName.
The name of the server the user was connected to is contained in
dellrcsg2TrapObjectTargetDeviceName.
The type of drive that has been mapped is contained in
dellrcsg2TrapObjectVirtualMediaDriveType.
The access mode for the drive that has been mapped is contained in
dellrcsg2TrapObjectVirtualMediaDriveAccessMode.
The user address is contained in
dellrcsg2TrapObjectUserAddress. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.36 |
dellrcsg2VirtualMediaDriveUnmappedA virtual media drive has been unmapped.
The name of the user who has established the virtual media session
is contained in dellrcsg2TrapObjectUserName.
The name of the server the user was connected to is contained in
dellrcsg2TrapObjectTargetDeviceName.
The type of drive that has been unmapped is contained in
dellrcsg2TrapObjectVirtualMediaDriveType.
The access mode for the drive that has been unmapped is contained in
dellrcsg2TrapObjectVirtualMediaDriveAccessMode.
The user address is contained in
dellrcsg2TrapObjectUserAddress. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.37 |
dellrcsg2LocalPortVirtualMediaSessionStartedTrapA local user has started a Virtual Media session to a server. A target
session to the server must have been established by a local user
prior to starting the VM session.
The name of the user who connected to the VM session
is contained in dellrcsg2TrapObjectUserName.
The name of the server the user connected to is contained in
dellrcsg2TrapObjectTargetDeviceName.
The ID of the SIP the target session is using is contained in
dellrcsg2TrapObjectSIPId.
This Trap is deprecated and is no longer used. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.38 |
dellrcsg2LocalPortVirtualMediaSessionStoppedTrapA local user has stopped a Virtual Media session to a server.
The name of the user who was connected to the VM session
is contained in dellrcsg2TrapObjectUserName.
The name of the server the user was connected to is contained in
dellrcsg2TrapObjectTargetDeviceName.
This Trap is deprecated and is no longer used. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.39 |
dellrcsg2LocalPortVirtualMediaSessionTerminatedTrapA local virtual media session has been terminated or preempted
by another user.
The name of the user who terminated or preempted the VM session is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available.
The name of the server the user was connected to contained in
dellrcsg2TrapObjectTargetDeviceName.
This Trap is deprecated and is no longer used. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.40 |
dellrcsg2LocalPortVirtualMediaDriveMappedA user on the local port has mapped a virtual media drive to the server.
The session identifier is contained in dellrcsg2TrapObjectSessionIdentifier.
The type of drive that has been unmapped is contained in
dellrcsg2TrapObjectVirtualMediaDriveType.
The access mode for the drive that has been unmapped is contained in
dellrcsg2TrapObjectVirtualMediaDriveAccessMode.
This Trap is deprecated and is no longer used. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.41 |
dellrcsg2LocalPortVirtualMediaDriveUnmappedA user on the local port has unmapped a virtual media drive to the server.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
The type of drive that has been unmapped is contained in
dellrcsg2TrapObjectVirtualMediaDriveType.
The access mode for the drive that has been unmapped is contained in
dellrcsg2TrapObjectVirtualMediaDriveAccessMode.
This Trap is deprecated and is no longer used. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.42 |
dellrcsg2LocalPortVirtualMediaSessionReservedTrapA local user has reserved a virtual media session.
The name of the server the user was connected to is contained in
dellrcsg2TrapObjectTargetDeviceName.
This Trap is deprecated and is no longer used. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.43 |
dellrcsg2LocalPortVirtualMediaSessionUnreservedTrapA user has unreserved a local virtual media session.
The name of the server the user was connected to is contained in
dellrcsg2TrapObjectTargetDeviceName.
This Trap is deprecated and is no longer used. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.44 |
dellrcsg2ScreenResolutionChangedTrapThe screen resolution of a server was changed.
The name of the user who changed the screen resolution is contained
in dellrcsg2TrapObjectUserName if available. An empty string is
reported if a user name is not available. A user name will not be
available if the target session controlling the server was started
from the local interface and local authentication is disabled.
The name of the server the screen resolution was changed on is
contained in dellrcsg2TrapObjectTargetDeviceName.
The previous screen resolution is contained in
dellrcsg2TrapObjectPreviousScreenResolution.
The new screen resolution is contained in
dellrcsg2TrapObjectCurrentScreenResolution.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.45 |
dellrcsg2AggregatedTargetDeviceStatusChangedTrapThe status of one or more servers (connection paths) has
changed.
A list of connection paths whose status has changed is contained
in dellrcsg2TrapObjectAggregatedTargetDeviceStatusChanged.
This trap is always sent by the RCS on bootup to report the
current status of all connection paths. Thereafter the trap is sent
when there is a change in connection path status and will include only
those paths whose status has changed. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.46 |
dellrcsg2FactoryDefaultsSetTrapThe RCS has been commanded to set itself to factory defaults.
The RCS sends this trap after being commanded to set itself
to factory defaults but prior to actually reverting to factory
defaults. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.47 |
dellrcsg2PowerSupplyFailureTrapA power supply failure has ocurred, for RCSes with dual power supplies.
The power supply which has failed is indicated in dellrcsg2TrapObjectPowerSupply. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.48 |
dellrcsg2PowerSupplyRestoredTrapA power supply has been restored, for RCSes with dual power supplies.
The power supply which has been restored is indicated in dellrcsg2TrapObjectPowerSupply. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.49 |
dellrcsg2PduDeviceOnlineTrapA power device attached to the RCS is detected to be online.
This trap is sent upon initialization of the power device if it is
online and responding. Subsequent traps are sent if the power device
transitions from offline to online.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.50 |
dellrcsg2PduDeviceOfflineTrapA power device attached to the RCS is detected to be offline.
This trap is sent upon initialization of the power device if it is not
responding. Subsequent traps are sent if the power device transitions
from online to offline.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.51 |
dellrcsg2PduOutletOnCommandTrapA outlet on a power device has been issued the on command.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that was issued the on command is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.52 |
dellrcsg2PduOutletOffCommandTrapA outlet on a power device has been issued the off command.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that was issued the off command is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.53 |
dellrcsg2PduOutletRebootCommandTrapA outlet on a power device has been issued the reboot command.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that was issued the reboot command is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.54 |
dellrcsg2PduOutletOnSenseFailTrapA power device attached to the RCS has detected an on sense
failure for a outlet.
An on sense failure occurs when a outlet should be in the on state
but is actually in the off state.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that has the failure is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.55 |
dellrcsg2PduOutletOffSenseFailTrapA power device attached to the RCS has detected an off sense
failure for a outlet.
An off sense failure occurs when a outlet should be in the off state
but is actually in the on state.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that has the failure is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.56 |
dellrcsg2PduStatusOutletOnTrapA power device outlet has changed to the on state.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that has changed to the on state is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.57 |
dellrcsg2PduStatusOutletOffTrapA power device outlet has changed to the off state.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that has changed to the off state is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.58 |
dellrcsg2PduPortNameChangedTrapThe name of a power device port has changed.
The previous name of the power device port is contained in
dellrcsg2TrapObjectOldName.
The new name of the power device port is contained in
dellrcsg2TrapObjectItemName.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.59 |
dellrcsg2PduOutletNameChangedTrapThe name of a power device outlet has changed.
The previous name of the power device outlet is contained in
dellrcsg2TrapObjectOldName.
The new name of the power device outlet is contained in
dellrcsg2TrapObjectItemName.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
The outlet number of the power device is contained in
dellrcsg2TrapObjectPduOutlet. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.60 |
dellrcsg2PduInletTotalLoadHighTrapA power device attached to the RCS has exceeded the maximum
threshold for total load of an inlet.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
The inlet of the power device is contained in
dellrcsg2TrapObjectPduDeviceInlet. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.61 |
dellrcsg2PduInletTotalLoadLowTrapA power device attached to the RCS has gone beneath the minimum
threshold for total load.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
The inlet of the power device is contained in
dellrcsg2TrapObjectPduDeviceInlet. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.62 |
dellrcsg2PduDeviceNameChangedTrapThe name of a power device has changed.
The previous name of the power device is contained in
dellrcsg2TrapObjectOldName.
The new name of the power device is contained in
dellrcsg2TrapObjectItemName.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.63 |
dellrcsg2PduInletNameChangedTrapThe name of a power device inlet has changed.
The previous name of the power device inlet is contained in
dellrcsg2TrapObjectOldName.
The new name of the power device inlet is contained in
dellrcsg2TrapObjectItemName.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
The inlet of the power device is contained in
dellrcsg2TrapObjectPduDeviceInlet. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.64 |
dellrcsg2PduOutletLockCommandTrapA outlet on a power device has been issued the lock command.
The name of the user who originally started the image upgrade is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that was issued the lock command is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.65 |
dellrcsg2PduOutletUnlockCommandTrapA outlet on a power device has been issued the unlock command.
The name of the user who originally started the image upgrade is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that was issued the unlock command is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.66 |
dellrcsg2PduStatusOutletLockTrapA power device outlet has changed to the lock state.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that has changed to the lock state is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.67 |
dellrcsg2PduStatusOutletUnlockTrapA power device outlet has changed to the unlock state.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that has changed to the unlock state is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.68 |
dellrcsg2PduImageFileUpgradeStartedTrapThe RCS has started an upgrade of the power device software image file.
The name of the user who initiated the image upgrade is contained
in dellrcsg2TrapObjectUserName if available.
The type of software image being upgraded is contained in
dellrcsg2TrapObjectTypeOfImage.
The software image version the RCS is upgrading the power device to is
contained in dellrcsg2TrapObjectImageNewVersion.
The software image version the power device is currently running
is contained in dellrcsg2TrapObjectImageCurrentVersion.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.69 |
dellrcsg2PduImageFileUpgradeResultTrapThe result of a software image file upgrade for a power device.
The result is contained in dellrcsg2TrapObjectImageFileUpgradeResult.
The name of the user who originally started the image upgrade is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available.
The type of software image the upgrade result is for is contained in
dellrcsg2TrapObjectTypeOfImage.
The software image version the RCS attempted to upgrade to
is contained in dellrcsg2TrapObjectImageNewVersion.
The software image version the RCS is running is contained
in dellrcsg2TrapObjectImageCurrentVersion. If the software image
upgrade was successful then this version will match the version
reported in dellrcsg2TrapObjectImageNewVersion.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.70 |
dellrcsg2PduCircuitNameChangedTrapThe name of a power device circuit has changed.
The previous name of the power device circuit is contained in
dellrcsg2TrapObjectOldName.
The new name of the power device circuit is contained in
dellrcsg2TrapObjectItemName.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
The circuit of the power device is contained in
dellrcsg2TrapObjectPduDeviceCircuit. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.71 |
dellrcsg2PduDeviceTotalLoadHighTrapA power device attached to the RCS has exceeded the maximum
threshold for total load of the device.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.72 |
dellrcsg2PduCircuitTotalLoadHighTrapA power device attached to the RCS has exceeded the maximum
threshold for total load of a circuit.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
The circuit of the power device is contained in
dellrcsg2TrapObjectPduDeviceCircuit. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.73 |
dellrcsg2PduOutletTotalLoadHighTrapA power device attached to the RCS has exceeded the maximum
threshold for total load of an Outlet.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
The circuit of the power device is contained in
dellrcsg2TrapObjectPduOutlet. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.74 |
dellrcsg2FanFailureTrapA fan failure has ocurred. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.75 |
dellrcsg2TemperatureRangeTrapUnit temperature outside operating range has been reached.
This trap is generated for a high temperature or low temperature
which is outside operating range. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.76 |
dellrcsg2SmartCardInsertedTrapA smart card has been inserted.
The name of the user who is connected to the session
is contained in dellrcsg2TrapObjectUserName.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
The user address is contained in
dellrcsg2TrapObjectUserAddress. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.77 |
dellrcsg2SmartCardRemovedTrapA smart card has been removed.
The name of the user who is connected to the session
is contained in dellrcsg2TrapObjectUserName.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
The user address is contained in
dellrcsg2TrapObjectUserAddress. TRAP-TYPE .1.3.6.1.4.1.10418.18.21.0.78 |
dellrcs1082ds OBJECT IDENTIFIER .1.3.6.1.4.1.10418.18.21.17 |
dellrcs2162ds OBJECT IDENTIFIER .1.3.6.1.4.1.10418.18.21.24 |
dellrcs4322ds OBJECT IDENTIFIER .1.3.6.1.4.1.10418.18.21.26 |
dellrcsg2Management OBJECT IDENTIFIER .1.3.6.1.4.1.10418.18.22 |
dellrcsg2TrapObject OBJECT IDENTIFIER .1.3.6.1.4.1.10418.18.22.6 |
dellrcsg2TrapObjectUserNameThis object is sent in a trap to identify the name of the user
for which the trap condition occured. If the trap condition occurred
as a result of activity on the local port (OSD), then the value of this
object will be the following string:
Local User UTF8String ( SIZE .1.3.6.1.4.1.10418.18.22.6.1 |
dellrcsg2TrapObjectTargetUserNameThis object is sent in a trap to identify the name of the target
user for which a trap condition occurred. UTF8String ( SIZE .1.3.6.1.4.1.10418.18.22.6.2 |
dellrcsg2TrapObjectImageTypeThis object is sent in a trap to identify the type of software image
for which the trap condition occured. UTF8String ( SIZE .1.3.6.1.4.1.10418.18.22.6.3 |
dellrcsg2TrapObjectImageNewVersionThis object is sent in a trap to identify the version of the new
software image the RCS is being upgraded to. UTF8String ( SIZE .1.3.6.1.4.1.10418.18.22.6.4 |
dellrcsg2TrapObjectImageCurrentVersionThis object is sent in a trap to identify the version of the
software image that the RCS is currently running. UTF8String ( SIZE .1.3.6.1.4.1.10418.18.22.6.5 |
dellrcsg2TrapObjectSessionIdentifierThis object is sent in a trap to identify the session
for which the trap condition occurred. The value will be
the name of a target device if the target device name is known, otherwise
the value will be the connection path to a target device.
If the value is a connection path it will have the
following format:
SIP i:Channel c
Where i is the ID of the SIP, and c is the tiered switch
channel number (0 if there is no switch in the path). UTF8String ( SIZE .1.3.6.1.4.1.10418.18.22.6.6 |
dellrcsg2TrapObjectSIPIdThis object is sent in a trap to identify the SIP for
which the trap condition occurred. UTF8String ( SIZE .1.3.6.1.4.1.10418.18.22.6.7 |
dellrcsg2TrapObjectTieredSwitchNameThis object is sent in a trap to identify the tiered switch
for which the trap condition occurred. UTF8String ( SIZE .1.3.6.1.4.1.10418.18.22.6.8 |
dellrcsg2TrapObjectOldTieredSwitchNameThis object is sent in a trap to identify the old name of a
tiered switch whose name was changed. UTF8String ( SIZE .1.3.6.1.4.1.10418.18.22.6.9 |
dellrcsg2TrapObjectTargetDeviceNameThis object is sent in a trap to identify the target device for
which the trap condition occurred. UTF8String ( SIZE .1.3.6.1.4.1.10418.18.22.6.10 |
dellrcsg2TrapObjectOldTargetDeviceNameThis object is sent in a trap to identify the old name of
a target device whose name was changed. UTF8String ( SIZE .1.3.6.1.4.1.10418.18.22.6.11 |
dellrcsg2TrapObjectFileNameThis object is sent in a trap to identify the name of a file
for which the trap condition occurred. DisplayString ( SIZE .1.3.6.1.4.1.10418.18.22.6.12 |
dellrcsg2TrapObjectLockReasonThis object is sent in a trap to explain the reason for which a
user account has been locked. UTF8String( SIZE .1.3.6.1.4.1.10418.18.22.6.13 |
dellrcsg2TrapObjectUnlockReasonThis object is sent in a trap to explain the reason for which a
user account has been unlocked. UTF8String( SIZE .1.3.6.1.4.1.10418.18.22.6.14 |
dellrcsg2TrapObjectUserAddressThis object is sent in a trap to identify the user address for
which a trap condition occurred.
For a remote user, the value is the IPv4 or IPv6 IP address.
For a local user, the value is the Local Port of the user. DisplayString( SIZE .1.3.6.1.4.1.10418.18.22.6.15 |
dellrcsg2TrapObjectSIPImageUpgradeResultThis object is sent in a trap to report the result of a SIP
image upgrade. SIPUpgradeResultsEnum .1.3.6.1.4.1.10418.18.22.6.16 |
dellrcsg2TrapObjectTypeOfImageThis object is sent in a trap to report the type of software
image for which the trap condition occurred. Enumeration .1.3.6.1.4.1.10418.18.22.6.17 |
dellrcsg2TrapObjectVirtualMediaDriveAccessModeThis object is sent in a trap to report the access mode
associated with a virtual drive for which
the trap condition occurred. Enumeration .1.3.6.1.4.1.10418.18.22.6.18 |
dellrcsg2TrapObjectVirtualMediaDriveTypeThis object is sent in a trap to report the type associated
with a virtual drive for which the trap condition
occurred. Enumeration .1.3.6.1.4.1.10418.18.22.6.19 |
dellrcsg2TrapObjectImageFileUpgradeResultThis object is sent in a trap to report the results of a
TFTP or ASMP image upgrade. ImageFileUpgradeResultsEnum .1.3.6.1.4.1.10418.18.22.6.20 |
dellrcsg2TrapObjectPduDevicePortThis object is sent in a trap to identify the RCS port
that the power device is attached to for which the trap condition
occurred. INTEGER .1.3.6.1.4.1.10418.18.22.6.21 |
dellrcsg2TrapObjectPduOutletThis object is sent in a trap to identify the power device outlet
number for which the trap condition occurred. INTEGER .1.3.6.1.4.1.10418.18.22.6.22 |
dellrcsg2TrapObjectOldNameThis object is sent in a trap to identify the old name of a port
or power device outlet for which the trap condition occurred. UTF8String ( SIZE .1.3.6.1.4.1.10418.18.22.6.23 |
dellrcsg2TrapObjectItemNameThis object is sent in a trap to identify the name of a port
or power device outlet for which the trap condition occurred. UTF8String ( SIZE .1.3.6.1.4.1.10418.18.22.6.24 |
dellrcsg2TrapObjectPduDeviceInletThis object is sent in a trap to identify the inlet of a power device
for which the trap condition occurred. INTEGER .1.3.6.1.4.1.10418.18.22.6.25 |
dellrcsg2TrapObjectPduDeviceNumberThis object is sent in a trap to identify the power device number
that is attached to a RCS port for which the trap
condition occurred. INTEGER .1.3.6.1.4.1.10418.18.22.6.26 |
dellrcsg2TrapObjectInputPortThis object is sent in a trap to identify the RCS input port
number for which the trap condition occurred. An input port is defined
here as an ARI port that interfaces the data traffic coming from
or going directly or indirectly to a target device. The values range
from 1 to the maximum number of ARI ports. INTEGER .1.3.6.1.4.1.10418.18.22.6.27 |
dellrcsg2TrapObjectOldInputPortThis object is sent in a trap to identify the old RCS input port
number for which the trap condition occurred. An input port is defined
here as an ARI port that interfaces the data traffic coming from
or going directly or indirectly to a target device. The values range
from 1 to the maximum number of ARI ports. INTEGER .1.3.6.1.4.1.10418.18.22.6.28 |
dellrcsg2TrapObjectPowerSupplyThis object is sent in a trap to identify the power supply
for which the trap condition occurred. DisplayString ( SIZE .1.3.6.1.4.1.10418.18.22.6.29 |
dellrcsg2TrapObjectPreviousScreenResolutionThis object is sent in a trap to identify the previous screen
resolution of the target target device. DisplayString ( SIZE .1.3.6.1.4.1.10418.18.22.6.30 |
dellrcsg2TrapObjectCurrentScreenResolutionThis object is sent in a trap to identify the current screen
resolution of the target server. DisplayString ( SIZE .1.3.6.1.4.1.10418.18.22.6.31 |
dellrcsg2TrapObjectAggregatedTargetDeviceStatusChangedThis object is sent in a trap to report server status changes. This
object will report the status change of multiple servers (connection
paths) in an aggregated encoding format as indicated below.
Note that on bootup the RCS will send this object in the
dellrcsg2AggregatedTargetDeviceStatusChangedTrap containing the status of all
connection paths in the RCS. Thereafter the RCS will
send this object in the dellrcsg2AggregatedTargetDeviceStatusChangedTrap containing
only the connection paths whose status has changed.
This object is composed of two sections, which are the header section
and the connection path section. The header section provides version
information and is the first 2 bytes of this object. The connection
path section provides information on each of the connection paths and
is defined in the bytes following the header.
Header Section
Byte 1 = Start indicator for the header section. The value of the
start indicator is always zero. The value of the start
indicator provides means for management applications to
determine that this object has a header section. All
previous implementations of this object have a non-zero
value in the first byte.
Byte 2 = Version of the aggregate object. The version provides
means to identify the format/structure of this aggregate
object. The format of the aggregate object, as described
here, is identified with a value of 3 for the version.
Connection Path Section
The connection path section is composed of 1 or more connection paths.
The information for each connection path is packed into 10 bytes as
follows:
Byte 1 = The RCS input port number associated with this
connection path. The input port is an ARI port that
interfaces the data traffic coming from or going directly
or indirectly to a target device or a power device.
Note that a power device will report the port number as
100 + the power device port number. For the first power
device port, Byte 1 will report 101 for the power device.
This will avoid potential port conflicts for ARI and
power device ports. In the event that additional power
device ports are available, the number will reflect the
power device port number (i.e. 101, 102, etc.)
Byte 2 = The tiered switch channel number associated with this
connection path. The value will be 0 if a switch channel
is not associated with this connection path.
For power devices, this Byte will represent the power
device number. Byte 3 will contain the outlet number
for this connection path.
Byte 3 ~ 8 = The EID of the SIP associated with this connection path.
Each byte in this field will encode two digits of the
SIP's EID number. For example, if the actual EID number
on the label attached to a SIP is 520255-0346DC then
bytes 3 through 8 would contain the following hex values:
Byte 3 = 0x52
Byte 4 = 0x02
Byte 5 = 0x55
Byte 6 = 0x03
Byte 7 = 0x46
Byte 8 = 0xDC
Note that the dash character is not represented in
the encoded value.
For a power device, the first byte (Byte 3) will
represent the outlet number and the remaining 5 bytes
(Byte 4-8) will be 0.
Byte 9 ~ the left most 4 bits
= The left most four bits of the 9th byte shall be used
to encode / decode the following integer value to
represent the power status of a connected server or the
power status of a power device outlet.
One of the following values can be reported:
1 = Off - The connection path does not have power,
which could be the result of the following
situation: the SIP is unplugged or the
SIP is plugged in but receives no power
from the target device.
2 = On - The connection path has power.
Byte 9 ~ the right most 4 bits
= The right most four bits of the 9th byte shall be used
to encode / decode the following integer value to
represent the viewer session status of a connection path.
For a power device or power device outlet, this value is
always 1 since viewer sessions are not supported.
One of the following values can be reported:
1 = Idle - There is not a viewer session active on
this connection path.
2 = Active - There is an active viewer session on this
connection path.
3 = Blocked - The connection path is blocked meaning a
viewer session cannot be established to
this connection path because of another
viewer session is currently using a
resource required by this connection path
in order to establish a connection path.
A viewer session cannot be blocked by
a virtual media session.
Byte 10 ~ the left most 4 bits
= The left most four bits of the 10th byte shall be used
to encode / decode the following integer value to
represent the virtual media session status of a
connection path. For a power device or power device
outlet, this value is always 1 since virtual media
sessions are not supported.
One of the following values can be reported:
1 = Idle - There is not a virtual media session
active on this connection path.
2 = Active - There is a virtual media session on this
connection path.
3 = Blocked - The connection path is blocked meaning a
virtual media session cannot be
established to this connection path
because of another virtual media session
is currently using a resource required by
this connection path in order to establish
a connection path. A virtual media session
cannot be blocked by a viewer session.
Byte 10 ~ the right most 4 bits
= The right most four bits of the 10th byte shall be used
for future use and they will have a value of 0.
Every connection path will be packed into this object in 10 byte
increments one after the other. The connection paths do not have to be
packed in any specific order. Note that the size of this object could
conceivably be as large as shown in the following calculation with
these assumptions.
- 24 channel switch connected to each port of the RCS
- 4 power devices connected to RCS, each having 32 outlets
(((16 ports X 24 channels) + (4 power devices X 32 power device outlets))
X 10 bytes) + (2 byte Header) = 5122. OCTET STRING ( SIZE .1.3.6.1.4.1.10418.18.22.6.32 |
dellrcsg2TrapObjectPduDeviceCircuitThis object is sent in a trap to identify the circuit of a power
device for which the trap condition occurred. INTEGER .1.3.6.1.4.1.10418.18.22.6.33 |
dellrcsg2TrapObjectSessionTypeThis object is sent in a trap to identify the session type for
which a trap condition occurred.
The value is KVM for a KVM session,
or Serial for a Serial session. DisplayString( SIZE .1.3.6.1.4.1.10418.18.22.6.34 |