ChrComIfEthernetoverATMIfTable-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ChrComIfEthernetoverATMIfTable-MIB.
17
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
17 total| Object Name |
|---|
IMPORTSThis table is an extension of the ifTable for the Ethernet/ATM interface type. Contains MAC-level configuration parameters and allows association of an interface with a specific LVM and LPG within its ELM SEQUENCE OF ChrComIfEthernetoverATMIfTableEntry .1.3.6.1.4.1.3695.1.2.5.3 |
chrComIfEthernetoverATMIfTableEntry ChrComIfEthernetoverATMIfTableEntry .chrComIfEthernetoverATMIfTableTable.1 |
chrComIfEthernetIfIndexIndex referring to the interface tablero Unsigned32 .chrComIfEthernetoverATMIfTableTable.1.1 |
chrComIfEthernetELMIndexELM index within card (up to 2 ELMs per card; current card has only 1)ro Unsigned32 .chrComIfEthernetoverATMIfTableTable.1.2 |
chrComIfEthernetEthernetIfTypeType of port (FE/GE, Electrical/Optical, etc.)ro EthernetIfTypeEnum .chrComIfEthernetoverATMIfTableTable.1.3 |
chrComIfEthernetPortEnableSpecifies if port is enabled or disabled. Ingress and egress traffic for this card is dropped if disabledrw TruthValue (SNMPv2-TC) .chrComIfEthernetoverATMIfTableTable.1.4 |
chrComIfEthernetAutoNegSpeedDefines if autonegotiation is allowed for Speedrw TruthValue (SNMPv2-TC) .chrComIfEthernetoverATMIfTableTable.1.5 |
chrComIfEthernetAutoNegDuplexModeDefines if autonegotiation is allowed for DuplexModerw TruthValue (SNMPv2-TC) .chrComIfEthernetoverATMIfTableTable.1.6 |
chrComIfEthernetAutoNegEnFlowControlDefines if autonegotiation is allowed for En-Flow-Controlrw TruthValue (SNMPv2-TC) .chrComIfEthernetoverATMIfTableTable.1.7 |
chrComIfEthernetSpeedSpeedrw SpeedEnum .chrComIfEthernetoverATMIfTableTable.1.8 |
chrComIfEthernetDuplexModeDuplex Mode (Half/Full)rw DuplexModeEnum .chrComIfEthernetoverATMIfTableTable.1.9 |
chrComIfEthernetEnFlowControlDefines if 802.3x Flow Control is enabledrw TruthValue (SNMPv2-TC) .chrComIfEthernetoverATMIfTableTable.1.10 |
chrComIfEthernetEnBackpressureDefines if backpressure is enabled in half-duplex moderw TruthValue (SNMPv2-TC) .chrComIfEthernetoverATMIfTableTable.1.11 |
chrComIfEthernetLpgIDID of Local Port Group (LPG) within the ELM that this port belongs torw Unsigned32 .chrComIfEthernetoverATMIfTableTable.1.12 |
chrComIfEthernetLvmIDID of Local VLAN Member (LVM) within the ELM that this port belongs torw Unsigned32 .chrComIfEthernetoverATMIfTableTable.1.13 |
chrComIfEthernetAlarmVector16 bit field. The following are bits relative positions (0=LSB), and the trap ID associated to each alarm state.
0. Ethernet Loss of Signal (-LOS) (metropolisEthLosAlarm)ro Integer32 .chrComIfEthernetoverATMIfTableTable.1.14 |
chrComIfEthernetAlarmSeverityProfileIndexrw AlarmSeverityProfileIndexEnum .chrComIfEthernetoverATMIfTableTable.1.15 |
More MIBs from Chromatis
Browse all ChromatisMIBs →ChrComIfOpticsOMS-SRC-MIB
SNMP MIB module
40 objects→
Chromatis-MIB
The Chromatis-MIB module facilitates SNMP-based monitoring and management of Chromatis Networks' Metrpolis traffic analysis and reporting appliances. It exposes performance metrics including traffic flow statistics, session counts, protocol distribution, and system resource utilization specific to the Metrpolis platform.
39 objects→
ChrComIfOpticsOMS-SNK-MIB
Standard SNMP MIB module defining data structures for ChrComIfOpticsOMS-SNK-MIB.
32 objects→
ChrComHWEquipment-MIB
SNMP MIB module
28 objects→
ChrComPmEthETH-Day-MIB
Standard SNMP MIB module defining data structures for ChrComPmEthETH-Day-MIB.
27 objects→
ChrComPmEthETH-Current-MIB
SNMP MIB module
26 objects→