CT-ELS10-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
326
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
326 total| Object Name |
|---|
sigma OBJECT IDENTIFIER .1.3.6.1.4.1.97 |
IMPORTS Unknown .1.3.6.1.4.1.97 |
els10-27WriteStatusTrapSent when a bank of Flash EPROM has been erased. If
els10-27swdisWriteStatus indicates success, then the unit is ready
to be downloaded with the new software. TRAP-TYPE .1.3.6.1.4.1.97.0.2 |
els10-27PortFunctionsTrapSent whenever the current functional state (active
protocols) of the port has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.3 |
els10-27RxQueuesTrapSent whenever the number of times that the port's receiver
has stopped receiving packets due to buffer space shortages
has exceeded the port's limit. TRAP-TYPE .1.3.6.1.4.1.97.0.4 |
els10-27RxStormFlagTrapSent whenever broadcast/multicast storm protection has been invoked
for the port. TRAP-TYPE .1.3.6.1.4.1.97.0.5 |
els10-27TxCongestsTrapSent whenever packets destined for the unit itself were
discarded due to lack of buffer space. TRAP-TYPE .1.3.6.1.4.1.97.0.6 |
els10-27DebugStringIdTrapSent whenever the unit has a debug text string to be
displayed. The text strings are sent in a stream-like
fashion. TRAP-TYPE .1.3.6.1.4.1.97.0.8 |
els10-27LpbkOperationTrapSend whenever the unit has finished a loop back test, or
a loop back error has been detected. TRAP-TYPE .1.3.6.1.4.1.97.0.9 |
els10-27TrunkStateTrapA trunking state change transition has occurred. The possible
transitions are:
CLOSED-ONEWAY
ONEWAY-PERTURBED
PERTURBED-JOINED
JOINED-HELDDOWN
CLOSED-HELDDOWN
ONEWAY-HELDDOWN
PERTURBED-HELDDOWN TRAP-TYPE .1.3.6.1.4.1.97.0.10 |
els10-27TrunkBridgeAddrTrapThe associated trunking MAC address of the bridge ID of the remote
bridge has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.11 |
els10-27TrunkIPAddrTrapThe associated trunking IP address of the remote bridge has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.12 |
els10-27TrunkErrorTrapAn error has occurred in trunking. TRAP-TYPE .1.3.6.1.4.1.97.0.13 |
els10-27TrunkLinkOrdinalTrapThe port's index in the trunking group has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.14 |
els10-27TrunkLinkCountTrapThe number of ports in the trunking group has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.15 |
els10-27DiagUnitBootedTrapThe unit has booted. els10-27adminFatalErr contains information about
why the unit rebooted. TRAP-TYPE .1.3.6.1.4.1.97.0.16 |
els10-27StorageFailureTrapSent if the unit's Configuration EEPROM has failed. The unit
will not be able to reboot, and must be returned to the
factory. TRAP-TYPE .1.3.6.1.4.1.97.0.17 |
els10-27PortCongestedTrapSent whenever outbound congestion control has been invoked
for the port. TRAP-TYPE .1.3.6.1.4.1.97.0.18 |
els10-27TopChangeBegunTrapThe spanning tree topology has begun to change. TRAP-TYPE .1.3.6.1.4.1.97.0.19 |
els10-27TopChangeEndTrapThe spanning tree topology has stopped changing. TRAP-TYPE .1.3.6.1.4.1.97.0.20 |
els10-27IfErrorsTrapSent whenever the number of hardware errors in received and
transmitted packets has exceeded the port's limit. TRAP-TYPE .1.3.6.1.4.1.97.0.21 |
els10-27StRootIDTrapThe spanning tree root bridge ID for the unit has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.22 |
els10-27StRootCostTrapThe unit's spanning tree cost to the root bridge has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.23 |
els10-27StRootPortTrapThe unit's spanning tree root port has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.24 |
els10-27StMaxAgeTrapThe unit's spanning tree maximum age has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.25 |
els10-27StHelloTimeTrapThe unit's spanning tree hello time has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.26 |
els10-27StForwardDelayTrapThe unit's spanning tree forward delay time has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.27 |
els10-27StDesigRootTrapThe Root Bridge ID in received Spanning Tree Configuration BPDUs
from the port has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.28 |
els10-27StPortDesigBridgeTrapThe bridge ID of the spanning tree designated bridge of the LAN/WAN
to which the port is attached has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.29 |
els10-27StPortDesigCostTrapThe cost to the spanning tree root bridge from the designated port of
the LAN/WAN to which the port is attached has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.30 |
els10-27StPortDesigPortTrapThe port ID of the spanning tree designated port of the LAN/WAN
to which the port is attached has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.31 |
els10-27StPortStateTrapThe spanning tree state of the port has changed. TRAP-TYPE .1.3.6.1.4.1.97.0.32 |
els10-27InvalidConfigurationFileTrapDiagnostics has detected corrupted configuration data.
Default parameter values have been restored. TRAP-TYPE .1.3.6.1.4.1.97.0.34 |
els10-27StInvalidFlashCodeImageTrapAn invalid code image was detected in flash memory.
An attempt will be made to obtain a valid image. TRAP-TYPE .1.3.6.1.4.1.97.0.35 |
els10-27hwDiagTrapSent whenever the unit's diagnostics have indicated an error. TRAP-TYPE .1.3.6.1.4.1.97.0.100 |
sys OBJECT IDENTIFIER .1.3.6.1.4.1.97.1 |
sysIDro Enumeration .1.3.6.1.4.1.97.1.1 |
sysResetrw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.1.2 |
sysTrapPortrw INTEGER .1.3.6.1.4.1.97.1.6 |
els10-27 OBJECT IDENTIFIER .1.3.6.1.4.1.97.9 |
els10-27hw OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.1 |
els10-27hwDiagCodero OCTET STRING .1.3.6.1.4.1.97.9.1.1 |
els10-27hwManufDataro OCTET STRING .1.3.6.1.4.1.97.9.1.2 |
els10-27hwPortCountro INTEGER .1.3.6.1.4.1.97.9.1.3 |
els10-27hwPortTable SEQUENCE OF LxhwPortEntry .1.3.6.1.4.1.97.9.1.4 |
els10-27hwPortEntry LxhwPortEntry .1.3.6.1.4.1.97.9.1.4.1 |
els10-27hwPortIndexro INTEGER .1.3.6.1.4.1.97.9.1.4.1.1 |
els10-27hwPortTypero Enumeration .1.3.6.1.4.1.97.9.1.4.1.2 |
els10-27hwPortSubTypero Enumeration .1.3.6.1.4.1.97.9.1.4.1.3 |
els10-27hwPortDiagPassedro Enumeration .1.3.6.1.4.1.97.9.1.4.1.4 |
els10-27hwAddrro OCTET STRING .1.3.6.1.4.1.97.9.1.4.1.5 |
els10-27hwUpLinkSpecifies whether the Up-Link I/O module is existedro Enumeration .1.3.6.1.4.1.97.9.1.5 |
els10-27hwUpLinkManufDataThis is a 32-byte array which contains the part number,
serial number, and hardware revision level of the Up-Link
I/O module. This array is valid only when the els10-27hwUplink
is true. If els10-27hwUplink is false, it returns an errorro OCTET STRING .1.3.6.1.4.1.97.9.1.6 |
els10-27sw OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.2 |
els10-27swNumberro INTEGER .1.3.6.1.4.1.97.9.2.1 |
els10-27swFilesetTable SEQUENCE OF LxswFilesetEntry .1.3.6.1.4.1.97.9.2.2 |
els10-27swFilesetEntry LxswFilesetEntry .1.3.6.1.4.1.97.9.2.2.1 |
els10-27swIndexro Enumeration .1.3.6.1.4.1.97.9.2.2.1.1 |
els10-27swDescro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.97.9.2.2.1.2 |
els10-27swCountro INTEGER .1.3.6.1.4.1.97.9.2.2.1.3 |
els10-27swTypero OCTET STRING .1.3.6.1.4.1.97.9.2.2.1.4 |
els10-27swSizesro OCTET STRING .1.3.6.1.4.1.97.9.2.2.1.5 |
els10-27swStartsro OCTET STRING .1.3.6.1.4.1.97.9.2.2.1.6 |
els10-27swBasesro OCTET STRING .1.3.6.1.4.1.97.9.2.2.1.7 |
els10-27swFlashBankro Enumeration .1.3.6.1.4.1.97.9.2.2.1.8 |
els10-27admin OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.3 |
els10-27adminFatalErrInformation about last reset:
First byte, cause of reset, values:
00: power failure
01: WatchDog Timeout
02: Software Reset
03: NMS Shutdown
04-255: Fatal Error
Second byte, Hw/Sw component that failed
Remaining bytes, description of fault.ro OCTET STRING .1.3.6.1.4.1.97.9.3.1 |
els10-27adminAnyPassrw OCTET STRING .1.3.6.1.4.1.97.9.3.2 |
els10-27adminGetPassrw OCTET STRING .1.3.6.1.4.1.97.9.3.3 |
els10-27adminNMSIPAddrrw IpAddress .1.3.6.1.4.1.97.9.3.4 |
els10-27adminStorageFailurero Enumeration .1.3.6.1.4.1.97.9.3.7 |
els10-27adminAuthenticationFailurero IpAddress .1.3.6.1.4.1.97.9.3.8 |
els10-27adminNAMReceiveCongestsro Counter .1.3.6.1.4.1.97.9.3.10 |
els10-27adminArpEntriesro Counter .1.3.6.1.4.1.97.9.3.11 |
els10-27adminArpStaticsro Counter .1.3.6.1.4.1.97.9.3.12 |
els10-27adminArpOverflowsro Counter .1.3.6.1.4.1.97.9.3.13 |
els10-27adminIpEntriesro Counter .1.3.6.1.4.1.97.9.3.14 |
els10-27adminIpStaticsro Counter .1.3.6.1.4.1.97.9.3.15 |
els10-27adminStaticPreferencerw INTEGER .1.3.6.1.4.1.97.9.3.16 |
els10-27adminRipPreferencerw INTEGER .1.3.6.1.4.1.97.9.3.17 |
els10-27adminRipRouteDiscardsro Counter .1.3.6.1.4.1.97.9.3.18 |
els10-27adminRebootConfigrw Enumeration .1.3.6.1.4.1.97.9.3.19 |
els10-27adminDisableButtonrw Enumeration .1.3.6.1.4.1.97.9.3.21 |
els10-27adminButtonSelectionrw Enumeration .1.3.6.1.4.1.97.9.3.22 |
els10-27adminLEDProgramOptionrw Enumeration .1.3.6.1.4.1.97.9.3.23 |
els10-27swdis OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.4 |
els10-27swdisDescThe description (0-32 bytes) of the software set currently
being downloaded, or a description of the software set last
downloaded since the FN1026 booted.ro OCTET STRING .1.3.6.1.4.1.97.9.4.1 |
els10-27swdisAccessThe version of software that may be downloaded. Attempts to
download other versions of software will be rejected. The
value for swdisAccess is embedded within the software files
that are to be distributed via TFTP. Its value may be
derived from the names of the software files. the NMS operator
may wish to use the following special values:
protected (1) No software downloads will be accepted
any-software (2) A software download of any version of new
software will be accepted - this is the factory defaultrw Enumeration .1.3.6.1.4.1.97.9.4.2 |
els10-27swdisWriteStatusThe status of the erase/write operation.ro Enumeration .1.3.6.1.4.1.97.9.4.3 |
els10-27swdisConfigIpThe IP address of the NMS (i.e., any IP host) that is allowed
to use TFTP to send/retrieve the configuration file of the
FN1026. A value of 0.0.0.0 (which is the factory specified
default) prevents any NMS from obtaining access, while a
value of 255.255.255.255 gives every NMS permission.rw IpAddress .1.3.6.1.4.1.97.9.4.4 |
els10-27swdisConfigRetryTimeThe number of seconds that the FN1026 will wait for an
acknowledgment before it retransmits an unacknowledged TFTP
data block. The factory specified default is 5 seconds.rw INTEGER .1.3.6.1.4.1.97.9.4.5 |
els10-27swdisConfigTotalTimeoutThe number of seconds that the FN1026 will wait for an
acknowledgment to a data block before it cancels a TFTP
session. The factory specified default is 25 seconds.rw INTEGER .1.3.6.1.4.1.97.9.4.6 |
els10-27addr OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.5 |
els10-27addrStaticsro Counter .1.3.6.1.4.1.97.9.5.1 |
els10-27addrDynamicsro Counter .1.3.6.1.4.1.97.9.5.2 |
els10-27addrDynamicMaxrw Gauge .1.3.6.1.4.1.97.9.5.3 |
els10-27addrDynamicOverflowsro Counter .1.3.6.1.4.1.97.9.5.4 |
els10-27addrFlagsrw INTEGER .1.3.6.1.4.1.97.9.5.5 |
els10-27addrMACrw OCTET STRING .1.3.6.1.4.1.97.9.5.6 |
els10-27addrPortrw INTEGER .1.3.6.1.4.1.97.9.5.7 |
els10-27addrOperationrw Enumeration .1.3.6.1.4.1.97.9.5.8 |
els10-27addrIndexrw INTEGER .1.3.6.1.4.1.97.9.5.9 |
els10-27addrNextrw INTEGER .1.3.6.1.4.1.97.9.5.10 |
els10-27addrBlockSizerw INTEGER .1.3.6.1.4.1.97.9.5.19 |
els10-27addrBlockrw OCTET STRING .1.3.6.1.4.1.97.9.5.20 |
els10-27if OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.6 |
els10-27ifTable SEQUENCE OF LxifEntry .1.3.6.1.4.1.97.9.6.1 |
els10-27ifEntry LxifEntry .1.3.6.1.4.1.97.9.6.1.1 |
els10-27ifIndexro INTEGER .1.3.6.1.4.1.97.9.6.1.1.1 |
els10-27ifThresholdrw INTEGER .1.3.6.1.4.1.97.9.6.1.1.4 |
els10-27ifThresholdTimerw INTEGER .1.3.6.1.4.1.97.9.6.1.1.5 |
els10-27ifRxQueueThreshrw INTEGER .1.3.6.1.4.1.97.9.6.1.1.6 |
els10-27ifRxQueueThreshTimerw INTEGER .1.3.6.1.4.1.97.9.6.1.1.7 |
els10-27ifTxStormCntrw INTEGER .1.3.6.1.4.1.97.9.6.1.1.8 |
els10-27ifTxStormTimerw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.9.6.1.1.9 |
els10-27ifFunctionro INTEGER .1.3.6.1.4.1.97.9.6.1.1.16 |
els10-27ifRxHwFCSsro Counter .1.3.6.1.4.1.97.9.6.1.1.18 |
els10-27ifRxQueuesro Counter .1.3.6.1.4.1.97.9.6.1.1.19 |
els10-27ifStatisticsTimero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.9.6.1.1.27 |
els10-27ifForwardedCharsro Counter .1.3.6.1.4.1.97.9.6.1.1.28 |
els10-27ifDescrrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.97.9.6.1.1.29 |
els10-27ifGoodRxFramesro Counter .1.3.6.1.4.1.97.9.6.1.1.30 |
els10-27ifGoodTxFramesro Counter .1.3.6.1.4.1.97.9.6.1.1.31 |
els10-27dot3 OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.7 |
els10-27dot3Table SEQUENCE OF Lxdot3Entry .1.3.6.1.4.1.97.9.7.1 |
els10-27dot3Entry Lxdot3Entry .1.3.6.1.4.1.97.9.7.1.1 |
els10-27dot3Indexro INTEGER .1.3.6.1.4.1.97.9.7.1.1.1 |
els10-27dot3TPLinkOKro Enumeration .1.3.6.1.4.1.97.9.7.1.1.2 |
els10-27dot3LedOnro Enumeration .1.3.6.1.4.1.97.9.7.1.1.3 |
els10-27dot3RxCollisionsro Counter .1.3.6.1.4.1.97.9.7.1.1.4 |
els10-27dot3RxRuntsro Counter .1.3.6.1.4.1.97.9.7.1.1.5 |
els10-27dot3RxLateCollsro Counter .1.3.6.1.4.1.97.9.7.1.1.6 |
els10-27dot3TxJabbersro Counter .1.3.6.1.4.1.97.9.7.1.1.7 |
els10-27dot3TxBabblesro Counter .1.3.6.1.4.1.97.9.7.1.1.8 |
els10-27dot3TxCollisionsro Counter .1.3.6.1.4.1.97.9.7.1.1.9 |
els10-27dot3SpeedSelectionrw Enumeration .1.3.6.1.4.1.97.9.7.1.1.13 |
els10-27dot3DuplexSelectionrw Enumeration .1.3.6.1.4.1.97.9.7.1.1.14 |
els10-27uart OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.8 |
els10-27uartTable SEQUENCE OF LxuartEntry .1.3.6.1.4.1.97.9.8.1 |
els10-27uartEntry LxuartEntry .1.3.6.1.4.1.97.9.8.1.1 |
els10-27uartIndexro INTEGER .1.3.6.1.4.1.97.9.8.1.1.1 |
els10-27uartBaudrw Enumeration .1.3.6.1.4.1.97.9.8.1.1.2 |
els10-27uartAlignmentErrorsro Counter .1.3.6.1.4.1.97.9.8.1.1.3 |
els10-27uartOverrunErrorsro Counter .1.3.6.1.4.1.97.9.8.1.1.4 |
els10-27debug OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.10 |
els10-27debugStringIDro INTEGER .1.3.6.1.4.1.97.9.10.1 |
els10-27debugStringro OCTET STRING .1.3.6.1.4.1.97.9.10.2 |
els10-27debugTable SEQUENCE OF LxdebugEntry .1.3.6.1.4.1.97.9.10.3 |
els10-27debugEntry LxdebugEntry .1.3.6.1.4.1.97.9.10.3.1 |
els10-27debugIndexro Enumeration .1.3.6.1.4.1.97.9.10.3.1.1 |
els10-27debugOperationrw Enumeration .1.3.6.1.4.1.97.9.10.3.1.2 |
els10-27debugBaserw INTEGER .1.3.6.1.4.1.97.9.10.3.1.3 |
els10-27debugLengthrw INTEGER .1.3.6.1.4.1.97.9.10.3.1.4 |
els10-27debugDatarw OCTET STRING .1.3.6.1.4.1.97.9.10.3.1.5 |
els10-27lpbk OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.11 |
els10-27lpbkTable SEQUENCE OF LxlpbkEntry .1.3.6.1.4.1.97.9.11.1 |
els10-27lpbkEntry LxlpbkEntry .1.3.6.1.4.1.97.9.11.1.1 |
els10-27lpbkIndexro INTEGER .1.3.6.1.4.1.97.9.11.1.1.1 |
els10-27lpbkOperationrw Enumeration .1.3.6.1.4.1.97.9.11.1.1.2 |
els10-27lpbkDestAddrrw OCTET STRING .1.3.6.1.4.1.97.9.11.1.1.3 |
els10-27lpbkPktNumrw INTEGER .1.3.6.1.4.1.97.9.11.1.1.4 |
els10-27lpbkIntervalrw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.9.11.1.1.5 |
els10-27lpbkPktLengthrw INTEGER .1.3.6.1.4.1.97.9.11.1.1.6 |
els10-27lpbkIncrementsrw INTEGER .1.3.6.1.4.1.97.9.11.1.1.7 |
els10-27lpbkGoodsro Counter .1.3.6.1.4.1.97.9.11.1.1.8 |
els10-27lpbkErrorNoReceivesro Counter .1.3.6.1.4.1.97.9.11.1.1.9 |
els10-27lpbkErrorBadReceivesro Counter .1.3.6.1.4.1.97.9.11.1.1.10 |
els10-27lpbkErrorSizero INTEGER .1.3.6.1.4.1.97.9.11.1.1.11 |
els10-27lpbkErrorSentro OCTET STRING .1.3.6.1.4.1.97.9.11.1.1.12 |
els10-27lpbkErrorReceivedro OCTET STRING .1.3.6.1.4.1.97.9.11.1.1.13 |
els10-27lpbkErrorOffsetro INTEGER .1.3.6.1.4.1.97.9.11.1.1.14 |
els10-27proto OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.12 |
els10-27protoTableThis table contains configuration information specify-
ing the types of protocols used to bridge, route,
translate, and filter frames for each port. SEQUENCE OF LxprotoEntry .1.3.6.1.4.1.97.9.12.1 |
els10-27protoEntryEach entry in this table specifies which protocols are
used by a particular port in the ES/1. LxprotoEntry .1.3.6.1.4.1.97.9.12.1.1 |
els10-27protoIfIndexIdentifies the interface (port) to which this entry's
information belongs. The value of this variable
corresponds to ifIndex, as well as most of the other
port identification values in related MIBs.ro INTEGER .1.3.6.1.4.1.97.9.12.1.1.1 |
els10-27protoBridgeDefines the bridging method to be applied to frames
received at, or destined for, this port. Ethernet and
FDDI ports may be configured for transparent, srt, or
none. Token Ring ports may be configured for any of
the four options. The UART may only be configured to
none.rw Enumeration .1.3.6.1.4.1.97.9.12.1.1.2 |
els10-27protoSuppressBpduAllows transmission of spanning tree protocol packets
to be suppressed. If normal(1), 802.1d spanning tree
packets are
transmitted as usual. If suppressed(2), these packets
are not transmitted. This option may be needed for in-
teroperability with non-802.1d spanning tree protocols
(e.g., DEC LanBridge 100).rw Enumeration .1.3.6.1.4.1.97.9.12.1.1.3 |
els10-27protoRipListenSpecifies whether the port should listen for internet
Routing Information Protocol (RFC-1058) packets, in order to
build the routing table for the unit.rw Enumeration .1.3.6.1.4.1.97.9.12.1.1.4 |
els10-27protoTrunkingSpecifies whether SMC's trunking protocol (an extension
to the standard Spanning Tree) is to be used over this port.rw Enumeration .1.3.6.1.4.1.97.9.12.1.1.5 |
els10-27sprotoTransmitPacingWhen enabled, introduces delays into normal transmission of frames, to
reduce the probability of collisions during heavy traffic.rw Enumeration .1.3.6.1.4.1.97.9.12.1.1.6 |
els10-27trunk OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.13 |
els10-27trunkTableThis table describes the trunking status and attributes of
the interfaces that are configured for bridge trunking. SEQUENCE OF LxtrunkEntry .1.3.6.1.4.1.97.9.13.1 |
els10-27trunkEntryAn entry exists in this table for each physical interface
(port) that is configured for trunking. LxtrunkEntry .1.3.6.1.4.1.97.9.13.1.1 |
els10-27trunkIfIndexIdentifies a physical interface (port) which is
configured for LAN trunking. The value of this variable
corresponds to ifIndex, as well as most of the other
port identification values in related MIBs.ro INTEGER .1.3.6.1.4.1.97.9.13.1.1.1 |
els10-27trunkStateIf off(1) then this link has not been enabled for trunking.
If closed(2) then this link has not yet received any Trunking
PDUs. If oneway(3) then incoming Trunking PDUs do not indicate
that our PDUs are being successfully received by the far end.
If joined(4) then this link is actively participating in the
trunk group. If perturbed(5) then this link is actively
participating in the trunk group; however, the transmission of
data packets has been temporarily stopped due to a change in
membership of the group. If helddown(6) then an error has been
detected and the link is being held out-of-service until the error
clears. If broken(7) then this link has been configured for trunking,
but the port is physically non-operational.ro Enumeration .1.3.6.1.4.1.97.9.13.1.1.2 |
els10-27trunkRemoteBridgeAddrThe MAC address portion of the bridge ID of the remote bridge.ro OCTET STRING .1.3.6.1.4.1.97.9.13.1.1.3 |
els10-27trunkRemoteIpThe IP address of the remote bridge, as reported by that
bridge for administrative purposes.ro IpAddress .1.3.6.1.4.1.97.9.13.1.1.4 |
els10-27trunkLastErrorThe last reason for failure when the link is in closed, oneway, or helddown state.ro Enumeration .1.3.6.1.4.1.97.9.13.1.1.5 |
els10-27trunkLinkOrdinalThe position of this link within the trunk group.ro INTEGER .1.3.6.1.4.1.97.9.13.1.1.6 |
els10-27trunkLinkCountThe number of links within the trunk group.ro INTEGER .1.3.6.1.4.1.97.9.13.1.1.7 |
els10-27trunkLastChangeThe number of seconds since els10-27trunkState changed.ro INTEGER .1.3.6.1.4.1.97.9.13.1.1.8 |
els10-27workgroup OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.14 |
els10-27WorkGroupNextNumberThe next available workgroup number to be used. When creating
a new workgroup, it is recommended to read the value of the variable
and use it to key into the workgroup table.ro INTEGER .1.3.6.1.4.1.97.9.14.1 |
els10-27WorkGroupCurrentCountThe total number of workgroups currently defined.ro INTEGER .1.3.6.1.4.1.97.9.14.2 |
els10-27WorkGroupMaxCountThe maximum number of workgroups allowed.ro INTEGER .1.3.6.1.4.1.97.9.14.3 |
els10-27WorkGroupTableThis table contains work group definitions for the interfaces. SEQUENCE OF LxWorkGroupEntry .1.3.6.1.4.1.97.9.14.4 |
els10-27WorkGroupEntryEach entry in this table contains a definition of a work group. LxWorkGroupEntry .1.3.6.1.4.1.97.9.14.4.1 |
els10-27WorkGroupNumberAn integer that identifies the work group, used as an index
to this table.rw INTEGER .1.3.6.1.4.1.97.9.14.4.1.1 |
els10-27WorkGroupNameA 1-16 character work group name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.97.9.14.4.1.2 |
els10-27WorkGroupPortsA list of all ports within the group. The first
octet specified ports 1-8, the second 9-16, etc.rw OCTET STRING .1.3.6.1.4.1.97.9.14.4.1.3 |
els10-27WorkGroupTypeThe type of work group:
all - no additional information needs to be supplied.rw Enumeration .1.3.6.1.4.1.97.9.14.4.1.4 |
els10-27trapMgt OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.15 |
els10-27trapControlTableThis table contains information about the severity of each trap
and whether the trap is currently enabled. SEQUENCE OF LxtrapControlEntry .1.3.6.1.4.1.97.9.15.1 |
els10-27trapControlEntry LxtrapControlEntry .1.3.6.1.4.1.97.9.15.1.1 |
els10-27trapIndexThe specific trap number.ro INTEGER .1.3.6.1.4.1.97.9.15.1.1.1 |
els10-27trapEnabledEnable or disable the generation of this trap.rw Enumeration .1.3.6.1.4.1.97.9.15.1.1.2 |
els10-27trapSeverityA user-definable severity, indicating the importance of the
trap.rw Enumeration .1.3.6.1.4.1.97.9.15.1.1.3 |
els10-27trapTextA description of the trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.97.9.15.1.1.4 |
els10-27trapSeverityControlTableThis table contains information about whether a class of
traps of a particular severity are enabled or disabled. SEQUENCE OF LxtrapSeverityControlEntry .1.3.6.1.4.1.97.9.15.2 |
els10-27trapSeverityControlEntry LxtrapSeverityControlEntry .1.3.6.1.4.1.97.9.15.2.1 |
els10-27trapSeverityControlSeverityA user-definable severity, indicating the importance of the
trap.rw Enumeration .1.3.6.1.4.1.97.9.15.2.1.1 |
els10-27trapSeverityEnableEnable or disable all traps of a given severity level.rw Enumeration .1.3.6.1.4.1.97.9.15.2.1.2 |
els10-27trapIncludeTextWhether or not a formatted text string is included in the trap
PDU.rw Enumeration .1.3.6.1.4.1.97.9.15.3 |
els10-27trapTimeThe time, in centiseconds, which should expire between the sending
of traps.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.9.15.4 |
els10-27trapRetryThe number of times any enterprise-specific trap is to be sent for
a given event. PDUs are retried using a truncated exponential backoff:
2 seconds, 4 seoncs, 8 seconds, 16 seconds, and then 32 seconds for
all succeeding intervals.rw INTEGER .1.3.6.1.4.1.97.9.15.5 |
els10-27trapNumberThe number of traps that are in the els10-27trapTable.ro INTEGER .1.3.6.1.4.1.97.9.15.6 |
els10-27trapTableThis table contains the latest traps that have been generated. SEQUENCE OF LxtrapEntry .1.3.6.1.4.1.97.9.15.7 |
els10-27trapEntry LxtrapEntry .1.3.6.1.4.1.97.9.15.7.1 |
els10-27trapEntryIndexA number representing the order in which the trap occurred
in time. This 32 bit number can wrap.ro INTEGER .1.3.6.1.4.1.97.9.15.7.1.1 |
els10-27trapEntryTimeStampThe time at which the trap occurred.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.9.15.7.1.2 |
els10-27trapEntryTextA description of the trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.97.9.15.7.1.3 |
els10-27trapEntryNumberThe specific trap number, as specified in the TRAP PDU.ro INTEGER .1.3.6.1.4.1.97.9.15.7.1.4 |
els10-27trapEntrySeverityA user-definable severity, indicating the importance of the
trap.ro Enumeration .1.3.6.1.4.1.97.9.15.7.1.5 |
els10-27pingMgt OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.16 |
els10-27pingDataTimeoutThe time, in centiseconds, from the last ping activity (a send
or receive of an ECHO_RESPONSE or ECHO_REQUEST
message), to when the els10-27pingEntry information for that ping
request will be deleted.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.9.16.1 |
els10-27pingTableThe set of information describing the active ping requests and
their results. SEQUENCE OF LxpingEntry .1.3.6.1.4.1.97.9.16.2 |
els10-27pingEntryThe parameters, state, and results of a ping request. LxpingEntry .1.3.6.1.4.1.97.9.16.2.1 |
els10-27pingNMSAddrThe IP address of the NMS, used to determine which ping
request to return information on.ro IpAddress .1.3.6.1.4.1.97.9.16.2.1.1 |
els10-27pingDestAddrThe IP address which is to be the destination of the ping
ECHO_REQUEST. This variable cannot be set while
els10-27pingOperation is on.rw IpAddress .1.3.6.1.4.1.97.9.16.2.1.2 |
els10-27pingStateThe current state of the ping request.ro Enumeration .1.3.6.1.4.1.97.9.16.2.1.3 |
els10-27pingCountThe number of ping requests which are to be sent. This
variable cannot be set while els10-27pingOperation is on.rw INTEGER .1.3.6.1.4.1.97.9.16.2.1.4 |
els10-27pingDataSizeThe datagram packet size which will be sent with the
ECHO_REQUEST, in bytes. This variable cannot be set while
els10-27pingOperation is on.rw INTEGER .1.3.6.1.4.1.97.9.16.2.1.5 |
els10-27pingWaitThe time, in centiseconds, between the sending of each
ECHO_REQUEST message. This variable cannot be set while
els10-27pingOperation is on.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.9.16.2.1.6 |
els10-27pingTimeOutThe time, in centiseconds, since the last ECHO_RESPONSE
was received (or the last ECHO_REQUEST was sent, if there
have been no responses) when the ping request will time out.
This variable cannot be set while els10-27pingOperation is on.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.9.16.2.1.7 |
els10-27pingOperationSetting els10-27pingOperation to on will begin the ping request.
Setting els10-27pingOperation to off will terminate the ping request.rw Enumeration .1.3.6.1.4.1.97.9.16.2.1.8 |
els10-27pingMinThe minimum round trip time for the ping requests and
responses, in centiseconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.9.16.2.1.9 |
els10-27pingMaxThe maximum round trip for the ping requests and
responses, in centiseconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.9.16.2.1.10 |
els10-27pingAvgThe average round trip time for the ping requests and
responses, in centiseconds.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.9.16.2.1.11 |
els10-27pingNumTransmittedThe number of ICMP ECHO_REQUEST messages that have
been transmitted during this ping request.ro INTEGER .1.3.6.1.4.1.97.9.16.2.1.12 |
els10-27pingNumReceivedThe number of ICMP ECHO_RESPONSE messages that have
been received as a result of this ping request.ro INTEGER .1.3.6.1.4.1.97.9.16.2.1.13 |
els10-27traceMgt OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.17 |
els10-27traceDataTimeoutThe time, in centiseconds, from the last traceroute activity (the
response to or timeout of the last probe sent), to when the
els10-27traceEntry information for that traceroute request will be
deleted.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.9.17.1 |
els10-27traceTableThe set of information describing the active traceroute requests
and their results. SEQUENCE OF LxtraceEntry .1.3.6.1.4.1.97.9.17.2 |
els10-27traceEntryThe parameters, state, and results of a traceroute request. LxtraceEntry .1.3.6.1.4.1.97.9.17.2.1 |
els10-27traceNMSAddrThe IP address of the NMS, used to determine which traceroute
request to return information on.ro IpAddress .1.3.6.1.4.1.97.9.17.2.1.1 |
els10-27traceDestAddrThe IP address which is to be the destination of the traceroute
request.This variable cannot be set while els10-27traceOperation is on.rw IpAddress .1.3.6.1.4.1.97.9.17.2.1.2 |
els10-27traceMaxTTLThe maximum time-to-live for outgoing traceroute probe
packets. This determines the number of hops that can be in a
traceroute. This variable cannot be set while els10-27traceOperation
is on.rw INTEGER .1.3.6.1.4.1.97.9.17.2.1.3 |
els10-27traceDataSizeThe size of the datagram sent with each probe. This variable
cannot be set while els10-27traceOperation is on.rw INTEGER .1.3.6.1.4.1.97.9.17.2.1.4 |
els10-27traceNumProbesThe number of probes which are sent for each hop. This
variable cannot be set while els10-27traceOperation is on.rw INTEGER .1.3.6.1.4.1.97.9.17.2.1.5 |
els10-27traceWaitThe time to wait in response to a probe. This variable cannot be
set while els10-27traceOperation is on.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.9.17.2.1.6 |
els10-27traceOperationSetting els10-27traceOperation to on will begin the traceroute request.
Setting els10-27traceOperation to off will terminate the traceroute
request.rw Enumeration .1.3.6.1.4.1.97.9.17.2.1.7 |
els10-27traceHopThe hop count for a set of probes with a particular TTL.ro INTEGER .1.3.6.1.4.1.97.9.17.2.1.8 |
els10-27traceHopAddrThe IP address of the host which responded for a probe with a
particular TTL.ro IpAddress .1.3.6.1.4.1.97.9.17.2.1.9 |
els10-27traceProbeThe probe instance for a particular hop.ro INTEGER .1.3.6.1.4.1.97.9.17.2.1.10 |
els10-27traceStateThe current state of the trace probe.ro Enumeration .1.3.6.1.4.1.97.9.17.2.1.11 |
els10-27traceTimeRound trip time of a probe for a particular hop.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.9.17.2.1.12 |
els10-27volmirrorgroup OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.19 |
els10-27volmirrorModeTo turn port mirroring on or off.rw Enumeration .1.3.6.1.4.1.97.9.19.1 |
els10-27volmirrorPortThe number of the port whose data will be mirrored to a
special monitor or analyzer port.rw INTEGER .1.3.6.1.4.1.97.9.19.2 |
els10-27volmonitorPortIdentifies the monitor or analyzer port to receive
frames from the special mirror port.rw INTEGER .1.3.6.1.4.1.97.9.19.3 |
els10-27volMirrorMacTableA table that contains information for the mirroring
on MAC addresses. SEQUENCE OF Els10-27volMirrorMacEntry .1.3.6.1.4.1.97.9.19.4 |
els10-27volmirrorMacEntryInformation about specific unicast MAC addresses
for which mirroring will act upon. Els10-27volMirrorMacEntry .1.3.6.1.4.1.97.9.19.4.1 |
els10-27volmirrorIndexEntry Indexro INTEGER .1.3.6.1.4.1.97.9.19.4.1.1 |
els10-27volmirrorMac1First MAC address for mirroring.rw OCTET STRING .1.3.6.1.4.1.97.9.19.4.1.2 |
els10-27VlanBridgeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.20 |
els10-27VlanVersionNumberSpecifies the version IEEE 802.1Q VLAN that has been implemented to.ro INTEGER .1.3.6.1.4.1.97.9.20.1 |
els10-27VlanOperatingModeSelects the mode of operation. The switch can operate as simply an 802.1d switch,
or an 802.1d switch with IEEE VLAN capability (802.1Q). A read of this object will return
the current operating mode.rw Enumeration .1.3.6.1.4.1.97.9.20.2 |
els10-27VlanResetDefaultsTo reset the specified bridge. The filtering database is cleared and initialized
with the entries specified in the Permananent database, and the Bridge protocol Entity is
initialized. While initializing a read will return a value of reset (2). While
operational a read will return a value of operating (2).rw Enumeration .1.3.6.1.4.1.97.9.20.3 |
els10-27VlanGVRPEnableIf the switch is operating in 802.1Q mode, this selects whether GVRP protocol
messages should be processed and VLANs configured accordingly for each
port on the switch. Each octet within the value of this object specifies a set of eight
ports, with the first octet specifying ports 1 through 8, the next octet specifying ports
9 through 16, etc. Within each octet, the least significant bit represents the
lowest numbered port, and the most significant bit represents the highest numbered port.
Thus, each port of the VLAN bridge is represented by single bit
within the value of this object. If that bit has a value of '1' then that port is
included in the set of ports; the port is not included if its bit has a value of '0'rw Enumeration .1.3.6.1.4.1.97.9.20.4 |
els10-27VlanAccessListA list of ports that should act as 'Access Ports'. These ports will strip all tags
on egress and also make use of a shared database that will automatically be kept by the
firmware. Each octet within the value of this object specifies a set of eight ports, with
the first octet specifying ports 1 through 8, the next octet specifying ports 9 through
16, etc. Within each octet, the least significant bit represents the lowest numbered
port, and the most significant bit represents the highest numbered port. Thus, each port
of the VLAN bridge is represented by single bit within the value of this object. If that
bit has a value of '1' then that port is included in the set of ports; the port is not
included if its bit has a value of '0'rw INTEGER .1.3.6.1.4.1.97.9.20.5 |
els10-27VlanConfigVlan OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.20.6 |
els10-27VlanNumActiveEntriesThe number of active VLAN entries for the device. This includes both static and
dynamic VLANs.ro INTEGER .1.3.6.1.4.1.97.9.20.6.1 |
els10-27VlanNumConfiguredEntriesThe number of configured VLAN entries for the device.ro INTEGER .1.3.6.1.4.1.97.9.20.6.2 |
els10-27VlanMaxNumEntriesThe maximum number of VLAN entries for the device.ro INTEGER .1.3.6.1.4.1.97.9.20.6.3 |
els10-27VlanConfigTableThis table allows for the creation, deletion, and modification of
specific VLANs. The ports defined within this group will be members of the 'member
set' as
defined in the IEEE 802.1Q specification. SEQUENCE OF Els10-27VlanConfigEntry .1.3.6.1.4.1.97.9.20.6.4 |
els10-27VlanConfigEntryAllows for configuration of specific VLAN entries. Els10-27VlanConfigEntry .1.3.6.1.4.1.97.9.20.6.4.1 |
els10-27VlanConfigIndexThe interface being configured.rw INTEGER .1.3.6.1.4.1.97.9.20.6.4.1.1 |
els10-27VlanConfigVIDThe 12 bit VLAN Identifier associated with the configured VLAN.rw INTEGER .1.3.6.1.4.1.97.9.20.6.4.1.2 |
els10-27VlanConfigPortsEach octet within the value of this object specifies
a set of eight ports, with the first octet specifying
ports 1 through 8, the next octet specifying ports 9
through 16, etc. Within each octet, the least significant
bit represents the lowest numbered port, and the most
significant bit represents the highest numbered port.
Thus, each port of the VLAN bridge is represented by
single bit within the value of this object. If that bit
has a value of '1' then that port is included in the set
of ports; the port is not included if its bit has a value of '0'.rw INTEGER .1.3.6.1.4.1.97.9.20.6.4.1.3 |
els10-27VlanConfigIPThe IP address to be used to access the unit on this Vlan. This must be a
valid host address.rw INTEGER .1.3.6.1.4.1.97.9.20.6.4.1.4 |
els10-27VlanConfigIPMaskThe IP subnet mask to be used with this Ip address.rw INTEGER .1.3.6.1.4.1.97.9.20.6.4.1.5 |
els10-27VlanConfigNameThe ASCII name associated with the configured VLAN.
A set of this object prior to creating an entry by
setting els10-27VlanEstablish will fail with a NO-INSTANCE error.rw DisplayString .1.3.6.1.4.1.97.9.20.6.4.1.6 |
els10-27VlanConfigStatusA set with the value of enable(1), enables all associated entries
in els10-27VlanConfigVID table for the specified VLAN. A set of
disable(2), disables all els10-27VlanConfigVID entries associated with
the specified VLAN. A set of this object prior to creating an entry by
setting els10-27VlanConfigEstablish will fail with a NO-INSTANCE error.rw Enumeration .1.3.6.1.4.1.97.9.20.6.4.1.7 |
els10-27VlanConfigEstablishA set of the value create(1), causes an entry to be created in
the els10-27VlanConfigTable as specified by the instancing information
of els10-27VlanConfigVID, els10-27VlanConfigName, and els10-27VlanConfigPorts.
A set of delete(2) causes the specified entry to be removed from the table.
A read of this object will always return create(1).rw Enumeration .1.3.6.1.4.1.97.9.20.6.4.1.8 |
els10-27VlanConfigEgressTableThis table allows for the specifying of the default VLAN ID for a specific port. If
NOT configured as an 'Access' port, then packets containing this VLAN ID will have the tag
stripped on egress. This will set the PVID for each port contained within the list. SEQUENCE OF Els10-27VlanConfigEgressEntry .1.3.6.1.4.1.97.9.20.6.5 |
els10-27VlanConfigEgressEntryAllows for configuration of specific VLAN entries. Els10-27VlanConfigEgressEntry .1.3.6.1.4.1.97.9.20.6.5.1 |
els10-27VlanEgressIndexThe index into the Vlan table. A port must be a member of this Vlan prior
to assigning this Id as the default.rw INTEGER .1.3.6.1.4.1.97.9.20.6.5.1.1 |
els10-27VlanEgressVIDThe 12 bit VLAN Identifier associated with the configured VLAN.rw INTEGER .1.3.6.1.4.1.97.9.20.6.5.1.2 |
els10-27VlanEgressListThe set of ports to which traffic destined for
the VLAN specified by els10-27VlanEgressVID
on the device will have this tag stripped on
egress. Each octet within the value of
this object specifies a set of eight ports, with thee
first octet specifying ports 1 through 8, the second
octet specifying ports 9 through 16, etc. Within each
octet, the least significant bit represents the lowest
numbered port, and the most significant bit represents
the highest numbered port. Thus, each port of the VLAN
bridge is represented by a single bit within the value
of this object. If that bit has a value of '1' then
that port is included in the set of ports; the port is
not included if its bit has a value of '0'.rw INTEGER .1.3.6.1.4.1.97.9.20.6.5.1.3 |
els10-27VlanEgressStatusA set with the value of enable(1), enables all associated entries
in els10-27VlanEgressVID table for the specified VLAN. A set of
disable(2), disables all els10-27VlanEgressVID entries associated with
the specified VLAN. A set of this object prior to creating an entry by
setting els10-27VlanEgressEstablish will fail with a NO-INSTANCE error.rw Enumeration .1.3.6.1.4.1.97.9.20.6.5.1.4 |
els10-27VlanFilterGVRPTableThis table allows for the specifying of VLAN ID's that will be resticted from being learnt
by the device. If a GVRP packet is received specifying this VLAN ID, it will be ignored. SEQUENCE OF Els10-27VlanFilterGVRPEntry .1.3.6.1.4.1.97.9.20.6.6 |
els10-27VlanFilterGVRPEntryAllows for configuration of specific entries. Els10-27VlanFilterGVRPEntry .1.3.6.1.4.1.97.9.20.6.6.1 |
els10-27VlanFilterGVRPIndexThe index into the Vlan Filter table. A maximum of 32
Vlan ID can be restricted from being learnt via GVRP.rw INTEGER .1.3.6.1.4.1.97.9.20.6.6.1.1 |
els10-27VlanFilterGVRPVIDThe 12 bit VLAN Identifier associated with the configured VLAN.rw INTEGER .1.3.6.1.4.1.97.9.20.6.6.1.2 |
els10-27VlanFilterGVRPListThe set of ports that will be restricted from leaning
of a VLAN ID from a GVRP message. The VLAN ID
is specified by els10-27VlanFilterGVRPVID.
Each octet within the value of
this object specifies a set of eight ports, with thee
first octet specifying ports 1 through 8, the second
octet specifying ports 9 through 16, etc. Within each
octet, the least significant bit represents the lowest
numbered port, and the most significant bit represents
the highest numbered port. Thus, each port of the VLAN
bridge is represented by a single bit within the value
of this object. If that bit has a value of '1' then
that port is included in the set of ports; the port is
not included if its bit has a value of '0'.rw INTEGER .1.3.6.1.4.1.97.9.20.6.6.1.3 |
els10-27VlanFilterGVRPStatusA set with the value of enable(1), enables all associated entries
in els10-27VlanFilterGVRPVID table for the specified VLAN. A set of
disable(2), disables all els10-27VlanFilterGVRPVID entries associated with
the specified VLAN. A set of this object prior to creating an entry by
setting els10-27VlanConfigEstablish will fail with a NO-INSTANCE error.rw Enumeration .1.3.6.1.4.1.97.9.20.6.6.1.4 |
els10-27VlanFilterGVRPEstablishVIDA set of the value create(1), causes an entry to be created in
the els10-27VlanFilterGVRPTable as specified by the instancing information
of els10-27VlanFilterGVRpVID, and els10-27VlanFilterGVRPPorts.
A set of delete(2) causes the specified entry to be removed from the table.
A read of this object will always return create(1).rw Enumeration .1.3.6.1.4.1.97.9.20.6.6.1.5 |
els10-27VlanStaticTableAllows for configuration of specific VLAN/MAC Address entries and to specify the
port to which traffic destined for this address pair should be forwarded. These entries
will not be aged out of the forwarding data base. SEQUENCE OF Els10-27VlanStaticEntry .1.3.6.1.4.1.97.9.20.6.7 |
els10-27VlanStaticEntryAllows for specifying specific entries. Els10-27VlanStaticEntry .1.3.6.1.4.1.97.9.20.6.7.1 |
els10-27VlanStaticVIDThe 12 bit VLAN Identifier associated with the configured VLAN.rw INTEGER .1.3.6.1.4.1.97.9.20.6.7.1.1 |
els10-27VlanStaticMACThe media dependent physical address.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.97.9.20.6.7.1.2 |
els10-27VlanStaticPortAn integer designating the port number to associate this address to.rw INTEGER (1.. 27) .1.3.6.1.4.1.97.9.20.6.7.1.3 |
els10-27VlanStaticEstablishA set of the value create(1), causes an entry to be created as specified by the instancing
information of els10-27VlanSaticVID, els10-27VlanStaticMAC, and els10-27VlanStaticPorts. A set of
delete(2) causes the specified entry to be removed from thetable.
A read of this object will always return create(1).rw Enumeration .1.3.6.1.4.1.97.9.20.6.7.1.4 |
els10-27volipmgroup OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.21 |
els10-27IPMulticastStatusParameter to enable or disable IP multicast filtering
on the device. When enabled, the device will examine IP
Multicast data packets and dynamically set up filter
ports to prevent flooding.
The default is disabled.rw Enumeration .1.3.6.1.4.1.97.9.21.1 |
els10-27ipmInterfaceRtrParameter to enable or disable the inclusion of this
interface in all Multicast filters. When enabled, all
IP Multicast packets for all group filters will be
transmitted over this interface. Value is a bit mask.rw INTEGER .1.3.6.1.4.1.97.9.21.2 |
els10-27voligmpgroup OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.22 |
els10-27igmpStatusParameter to enable or disable IGMP snooping on
the device. When enabled, the device will examine IGMP
packets and set up filters for IGMP ports.
The default is enabled.rw Enumeration .1.3.6.1.4.1.97.9.22.1 |
els10-27igmpQueryStatusParameter to enable or disable the device to act as a
Querier. If enabled, the device will send out a Query
as a Proxy to solicit reports. The device will not
become an IGMP router.
The default is disabled.rw Enumeration .1.3.6.1.4.1.97.9.22.2 |
els10-27igmpQueryCountMaximum number of queries that have not been heard on the
system before the system starts taking action to solicit
reports (default is 5).rw INTEGER .1.3.6.1.4.1.97.9.22.3 |
els10-27igmpPortDelayTimeout value (mins) between IGMP Reports or IGMP Queries
received on a port before the system times out the entry
from the Multicast Address Filter (default is 5 minutes).rw INTEGER .1.3.6.1.4.1.97.9.22.4 |
els10-27igmpCacheTableThe (conceptual) table listing the IP multicast groups
for which there are members on a particular interface. SEQUENCE OF Els10-27igmpCacheEntry .1.3.6.1.4.1.97.9.22.5 |
els10-27igmpCacheEntryAn entry (conceptual row) in the els10-27igmpCacheTable. Els10-27igmpCacheEntry .1.3.6.1.4.1.97.9.22.5.1 |
els10-27igmpCacheAddressThe IP multicast group address for which this entry
contains information.ro IpAddress .1.3.6.1.4.1.97.9.22.5.1.1 |
els10-27igmpCacheIfIndexThe interface for which this entry contains infor-
mation for an IP multicast group address.ro INTEGER .1.3.6.1.4.1.97.9.22.5.1.2 |
els10-27igmpCacheExpiryTimeThe minimum amount of time remaining before this
entry will be aged out.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.97.9.22.5.1.3 |
els10-27FlowControlCtl OBJECT IDENTIFIER .1.3.6.1.4.1.97.9.23 |
els10-27FlowControlBackPressureControl back pressure on a system wide basis.
On (1),
Off (2)rw INTEGER .1.3.6.1.4.1.97.9.23.1 |
els10-27FlowControlThresholdValueA value specified as a percent of the available buffers.
When fewer than the percent of the avaialable buffers
is detected, flow control will be initiated. Flow control
will cease when the free buffer count meets or exceeds
this percent.rw INTEGER .1.3.6.1.4.1.97.9.23.2 |
els10-27FlowControlPauseIntevalA value between 10 and 65535. Each pause interval is equal
to '5.12 microseconds'. A value of 10 will equal '51.2
microseconds'.rw INTEGER .1.3.6.1.4.1.97.9.23.3 |
els10-27FlowControlTableProvides a list of control objects over flow control parameters. SEQUENCE OF Els10-27FlowControlEntry .1.3.6.1.4.1.97.9.23.4 |
els10-27FlowControlEntryDefines a particular entry containing objects pertaining to
definition and control over flow control ports. Els10-27FlowControlEntry .1.3.6.1.4.1.97.9.23.4.1 |
els10-27FlowControlInterfaceThe MIB2 interface for which this flow control information pertainsro INTEGER .1.3.6.1.4.1.97.9.23.4.1.1 |
els10-27FlowControlEnableControl 802.3x flow control on a per interface basis.
On (1),
Off (2)rw INTEGER .1.3.6.1.4.1.97.9.23.4.1.2 |
els10-27FlowControlRxPauseFramesThe number of pause frames received on this interface.ro INTEGER .1.3.6.1.4.1.97.9.23.4.1.3 |
els10-27FlowControlTxPauseFramesThe number of pause frames transmitted on this interface.ro INTEGER .1.3.6.1.4.1.97.9.23.4.1.4 |