CNA-TESTPLUG-MIB
AI MIB Summary
The CNA-TESTPLUG-MIB provides SNMP access to configure and monitor the operational status, diagnostic counters, and traffic capture states of Avaya Converged Network Analyzer (CNA) test-plug hardware interfaces. This module enables administrators to retrieve real-time performance metrics and control the activation of packet capture sessions on specific CNA test points for network traffic analysis.
This module defines an interface to control an monitor an Avaya's Converged Network Analyzer (CNA) test-plug Copyright notice: This AVAYA SNMP Management Information Base Specification (Specification) embodies AVAYA confidential and Proprietary intellectual property. AVAYA retains all Title and ownership in the Specification, including any revisionsIt is AVAYA's intent to encourage the widespread use of this Specification in connection with the management of AVAYA products. AVAYA grants vendors, end-users, and other interested parties a non-exclusive license to use this Specification in connection with the management of AVAYA products.This Specification is supplied 'as is', and AVAYA makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
avCnaTestPlugMIB.1.3.6.1.4.1.6889.2.13.2
49
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
49 total| Object Name |
|---|
avaya OBJECT IDENTIFIER .1.3.6.1.4.1.6889 |
mibs OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2 |
avCnaMibs OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.13 |
avCnaTestPlugMIBThis module defines an interface to control an monitor an Avaya's Converged Network Analyzer (CNA) test-plug Copyright notice: This AVAYA SNMP Management Information Base Specification (Specification) embodies AVAYA confidential and Proprietary intellectual property. AVAYA retains all Title and ownership in the Specification, including any revisionsIt is AVAYA's intent to encourage the widespread use of this Specification in connection with the management of AVAYA products. AVAYA grants vendors, end-users, and other interested parties a non-exclusive license to use this Specification in connection with the management of AVAYA products.This Specification is supplied 'as is', and AVAYA makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6889.2.13.2 |
avCnaTpNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.13.2.0 |
avCnaTpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.13.2.1 |
avCnaTpGlobalEnableEnable/Disable all testplugsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6889.2.13.2.1.1 |
avCnaTpVersionThe version of the test plugsrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6889.2.13.2.1.2 |
avCnaTpMaxNumberThe maximum number of testplugs supported by the devicerw Integer32 .1.3.6.1.4.1.6889.2.13.2.1.3 |
avCnaTpConfTableTestplug creation and configuration table SEQUENCE OF AvCnaTpConfEntry .1.3.6.1.4.1.6889.2.13.2.1.4 |
avCnaTpConfEntry AvCnaTpConfEntry .1.3.6.1.4.1.6889.2.13.2.1.4.1 |
avCnaTpConfIdThe test plug instance identifier. Integer32 .1.3.6.1.4.1.6889.2.13.2.1.4.1.1 |
avCnaTpConfBindToThe test plug interface binding method: none(1) - the tesplug is disabled pmi(2) - bind to the primary management interface (i.e. the SNMP agent interface). This method is applicable to devices with only one interface (like IP phones) and to G350 R4. ifIndex(3) - bind to a specific interface. This method is applicable to devices that supports dynamic IP addresses (like security gateways). ipAddress(4) - bind to a specific IP interface. This method is applicable to L2 interfaces with multiple L3 interface (e.g. two IP interfaces over a VLAN).rw Enumeration .1.3.6.1.4.1.6889.2.13.2.1.4.1.2 |
avCnaTpConfIfIndexThe interface number (RFC1213-MIB/IfIndex) for this test-plug. This item is writeable when avCnaTpConfBindTo is 'none(1) or ifIndex(3).rw Integer32 .1.3.6.1.4.1.6889.2.13.2.1.4.1.3 |
avCnaTpConfAddressTypeThe address type for the test plug. This item is writeable when avCnaTpConfBindTo is 'none(1) or ipAddress (4).rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.13.2.1.4.1.4 |
avCnaTpConfAddressThe address for the test plug. This item is writeable when avCnaTpConfBindTo is 'none(1) or ipAddress (4).rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.13.2.1.4.1.5 |
avCnaTpConfControlPortThe UDP port on which the test plug listens for commands from the scheduler.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.13.2.1.4.1.6 |
avCnaTpConfRtpTestPointSelect the test point for RTP test to be either the 'network' or the 'voip-app' (including internal delays)rw Enumeration .1.3.6.1.4.1.6889.2.13.2.1.4.1.7 |
avCnaTpConfRtpTestPortThe UDP port for RTP tests.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.13.2.1.4.1.8 |
avCnaTpConfRtpEchoPortThe UDP RTP tests echo port.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.13.2.1.4.1.9 |
avCnaTpConfClearCountersClear the test plug activity countersrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6889.2.13.2.1.4.1.10 |
avCnaTpConfMACThe MAC address used to uniquely identify the test plugrw OCTET STRING .1.3.6.1.4.1.6889.2.13.2.1.4.1.11 |
avCnaTpConfTestLimiterIntervalThe Test rate limiter interval in secondsrw Integer32 .1.3.6.1.4.1.6889.2.13.2.1.4.1.12 |
avCnaTpConfTestLimiterMaxTestsThe Test rate limiter interval in secondsrw Integer32 .1.3.6.1.4.1.6889.2.13.2.1.4.1.13 |
avCnaTpConfRowStatusCreate/Delete a test-plug.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.13.2.1.4.1.14 |
avCnaTpSchedulerTableScheduler list configuration table SEQUENCE OF AvCnaTpSchedulerEntry .1.3.6.1.4.1.6889.2.13.2.1.5 |
avCnaTpSchedulerEntry AvCnaTpSchedulerEntry .1.3.6.1.4.1.6889.2.13.2.1.5.1 |
avCnaTpSchedulerIndexThe index of this scheduler in the Scheduler-list. Integer32 .1.3.6.1.4.1.6889.2.13.2.1.5.1.1 |
avCnaTpSchedulerAddressTypeAddress type for the schedulerrw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.13.2.1.5.1.2 |
avCnaTpSchedulerAddressAddress of the scheduler.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.13.2.1.5.1.3 |
avCnaTpSchedulerPortNumberScheduler registration TCP port (default: 8888).rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.13.2.1.5.1.4 |
avCnaTpSchedulerRowStatusCreate/Delete a scheduler to the list.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.13.2.1.5.1.5 |
avCnaTpMonTableThis table monitors test plugs activity. SEQUENCE OF AvCnaTpMonEntry .1.3.6.1.4.1.6889.2.13.2.1.6 |
avCnaTpMonEntry AvCnaTpMonEntry .1.3.6.1.4.1.6889.2.13.2.1.6.1 |
avCnaTpMonRegStatusTest Plug status where: unregistered ::= The test plug is attempting to register and is currently unregistered. schedListExhausted ::= The test plug has exhausted its scheduler list at least once, and is now attempting to register. idle ::= Test Plug is registering but idle. test ::= The test plug is running a test. suspended ::= The test plug is idle because a test was cancelled. noIp ::= No IP address is configured for the test-plug interface badIP ::= The configured test plug address is not configured for the test-plug interface. schedListEmpty ::= The scheduler list is empty (test plug disabled) controlPortBindFailed ::= cannot bind the UDP control port rtpPortBindFailed ::= cannot bind the UDP port for RTP tests.ro Enumeration .1.3.6.1.4.1.6889.2.13.2.1.6.1.1 |
avCnaTpMonSchedIndexThe index of the scheduler on which the test plug is registered or attempting to register (avCnaTpSchedulerIndex)ro Integer32 .1.3.6.1.4.1.6889.2.13.2.1.6.1.2 |
avCnaTpMonLastTestThe current/last test performed by the test plug.ro Enumeration .1.3.6.1.4.1.6889.2.13.2.1.6.1.3 |
avCnaTpMonRemTestAddrTypeThe Remote test peer address typero InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.13.2.1.6.1.4 |
avCnaTpMonRemTestAddrThe remote test peer address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.13.2.1.6.1.5 |
avCnaTpMonLastTestSchedAddrTypero InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.13.2.1.6.1.6 |
avCnaTpMonLastTestSchedAddrAddress of scheduler which initiated the last test.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.13.2.1.6.1.7 |
avCnaTpMonLastTestResLast test result stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6889.2.13.2.1.6.1.8 |
avCnaTpTestTablePer test activity counters SEQUENCE OF AvCnaTpTestEntry .1.3.6.1.4.1.6889.2.13.2.1.7 |
avCnaTpTestEntry AvCnaTpTestEntry .1.3.6.1.4.1.6889.2.13.2.1.7.1 |
avCnaTpTestIdTest ID Integer32 .1.3.6.1.4.1.6889.2.13.2.1.7.1.1 |
avCnaTpTestNameThe test name (e.g. 'ping')ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6889.2.13.2.1.7.1.2 |
avCnaTpTestCountNumber of executed testsro Counter32 .1.3.6.1.4.1.6889.2.13.2.1.7.1.3 |
avCnaTpTestCancelledNumber of cancelled testsro Counter32 .1.3.6.1.4.1.6889.2.13.2.1.7.1.4 |
avCnaTpTestFailedNumber of failed testsro Counter32 .1.3.6.1.4.1.6889.2.13.2.1.7.1.5 |
More MIBs from Avaya
Browse all AvayaMIBs →G3-AVAYA-MIB
Standard SNMP MIB module defining data structures for G3-AVAYA-MIB.
4281 objects→
G700-MG-MIB
SNMP MIB module
367 objects→
Avaya-96xxIPTelephone-MIB
The Avaya-96xxIPTelephone-MIB enables SNMP-based monitoring and management of Avaya 96xx series IP telephones running Release S3.1, providing access to device-specific operational metrics such as call session states, network interface statistics, hardware status indicators, and firmware versioning data.
248 objects→
Avaya-46xxIPTelephone-MIB
The Avaya-46xxIPTelephone-MIB facilitates SNMP-based monitoring and management of Avaya 46xx series IP telephones (firmware through Release 2.8) by exposing device status, port statistics, call session states, and power consumption metrics compliant with COMPAS 75441 standards.
225 objects→
Avaya_46xxIPTelephone-MIB
The Avaya_46xxIPTelephone-MIB enables SNMP-based monitoring and management of Avaya 46xx series IP telephones (up to Release 2.8) by exposing device operational status, port statistics, and call session metrics defined in the COMPAS 75441 specification.
225 objects→
IPO-PROD-MIB
The IPO-PROD-MIB module registers specific sysObjectID values to uniquely identify Avaya IP Office telephone switches within an SNMP management station, enabling the differentiation of these hardware devices from other network elements during monitoring and polling operations.
179 objects→