CLAB-ANI-NID-MIB
AI MIB Summary
The CLAB-ANI-NID-MIB module enables SNMP-based monitoring and configuration of Cable Television Laboratories, Inc. (CableLabs) compliant Network Interface Devices (NIDs) within the Access Node Infrastructure. It facilitates the retrieval of device status, operational parameters, and performance counters specific to the physical and logical interfaces of these access nodes.
This MIB module contains the management for Network Interface Devices (NIDs). Copyright 2016 Cable Television Laboratories, Inc. All rights reserved.
Main OID:
clabAniNidMib.1.3.6.1.4.1.4491.4.8
33
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
33 total| Object Name |
|---|
clabAniNidMibThis MIB module contains the management for Network Interface Devices (NIDs). Copyright 2016 Cable Television Laboratories, Inc. All rights reserved. MODULE-IDENTITY .1.3.6.1.4.1.4491.4.8 |
clabAniNidNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.4491.4.8.0 |
clabAniNidMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.4.8.1 |
clabAniNidCfgObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.4.8.1.1 |
clabAniNidCfgIDHuman Readable Identifier - Assigned by install technician.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.4.8.1.1.1 |
clabAniNidCfgPtpMcastMacFor transmitting PTP packets, either the forwardable multicast MAC address (01-1B-19-00-00-00) or the non-forwardable multicast MAC address (01-80-C2-00-00-0E) must be used as the destination MAC address. The MAC address in use is selected on a per-port basis through the configuration. However, the non-forwardable multicast MAC address (01-80-C2-00-00-0E) will be used if no destination MAC is configured.rw Enumeration .1.3.6.1.4.1.4491.4.8.1.1.2 |
clabAniNidCfgTelnetEnabledThis object allows enabling or disabling Telnet access on the NID.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.4.8.1.1.3 |
clabAniNidCfgTftpEnabledThis object allows enabling or disabling TFTP access to/from the NID. The default is false (disabled)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.4.8.1.1.4 |
clabAniNidCfgClientAuthStatusCurrent authentication status of the NID authentication client with respect to the AAA server.ro Enumeration .1.3.6.1.4.1.4491.4.8.1.1.5 |
clabAniNidCfgAuthServerServiceTypeAuthentication protocol. Only one protocol may be active on a NID.rw Enumeration .1.3.6.1.4.1.4491.4.8.1.1.6 |
clabAniNidCfgPrimaryServerIpAddressTypeAAA primary server IP Address Typerw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.4.8.1.1.7 |
clabAniNidCfgPrimaryServerIpAddressAAA primary server IP Addressrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.4.8.1.1.8 |
clabAniNidCfgPrimaryServerPortAAA primary port numberrw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.4.8.1.1.9 |
clabAniNidCfgSecondaryServerIpAddressTypeAAA Secondary server IP Address Typerw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.4.8.1.1.10 |
clabAniNidCfgSecondaryServerIpAddressAAA Secondary server IP Addressrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.4.8.1.1.11 |
clabAniNidCfgSecondaryServerPortAAA secondary port numberrw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.4.8.1.1.12 |
clabAniNidStatusObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.4.8.1.2 |
clabAniNidStatusAuthHistoryMaxTableSizeSets the maximum number of rows. If a new row is to be added (i.e., a new session attempt)and the addition would cause the table to exceed the maximam table size, the oldest entry must be first deleted then the new authentication attempt row is appended to the table (i.e., added as the last row).rw Unsigned32 .1.3.6.1.4.1.4491.4.8.1.2.1 |
clabAniNidStatusAuthHistoryTableThis table reports each authentication attempt and result. Radius and TACACS servers available to authentication clients. SEQUENCE OF ClabAniNidStatusAuthHistoryEntry .1.3.6.1.4.1.4491.4.8.1.2.2 |
clabAniNidStatusAuthHistoryEntryOne entry per authentication attempt. ClabAniNidStatusAuthHistoryEntry .1.3.6.1.4.1.4491.4.8.1.2.2.1 |
clabAniNidStatusAuthHistoryInitiationTimeIndex value of the clabAniStatusNidHistoryServerTable. TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4491.4.8.1.2.2.1.1 |
clabAniNidStatusAuthHistoryResultsAttempted authentication outcome. Failure reason codes follow: failed_rc1(2) - Unknown failed_rc2(3) - Server Not Available failed_rc3(4) - Unknown User .rw Enumeration .1.3.6.1.4.1.4491.4.8.1.2.2.1.2 |
clabAniNidStatusAuthHistoryServerIdentifies whether primary or secondary server access was attempted. If the primary server rejected the session or was not available, the NID should attempt accessing the secondary server if defined.ro Enumeration .1.3.6.1.4.1.4491.4.8.1.2.2.1.3 |
clabAniNidStatusReportCircuitTableThis table reports each circuit associated with this NID. This table and its contents are stored in non-volatile memory. SEQUENCE OF ClabAniNidStatusReportCircuitEntry .1.3.6.1.4.1.4491.4.8.1.2.3 |
clabAniNidStatusReportCircuitEntryOne entry per circuit. ClabAniNidStatusReportCircuitEntry .1.3.6.1.4.1.4491.4.8.1.2.3.1 |
clabAniNidStatusReportCircuitIndexIndex value of the clabAniNidStatusCircuitReportTable.ro Unsigned32 .1.3.6.1.4.1.4491.4.8.1.2.3.1.1 |
clabAniNidStatusReportCircuitIdentifierService or circuit identifierro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.4.8.1.2.3.1.2 |
clabAniNidStatusReportCircuitTargetIdentifierTarget identifier (TID)ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.4.8.1.2.3.1.3 |
clabAniNidMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4491.4.8.99 |
clabAniNidMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4491.4.8.99.1 |
clabAniNidComplianceThe compliance statement for the NID device. Unknown .1.3.6.1.4.1.4491.4.8.99.1.1 |
clabAniNidMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4491.4.8.99.2 |
clabAniNidGroupObjects implemented in the clabAniNidGroup. Unknown .1.3.6.1.4.1.4491.4.8.99.2.1 |
More MIBs from Cable Television Laboratories
Browse all Cable Television LaboratoriesMIBs →CLAB-WIFI-MIB
The CLAB-WIFI-MIB module provides SNMP management objects for monitoring and configuring Wi-Fi interface parameters on Cable Television Laboratories, Inc. (CableLabs) compliant hardware. It exposes specific metrics for wireless interface status, operational states, and performance counters to facilitate network troubleshooting and configuration management.
548 objects→
DOCS-RPHY-MIB
SNMP MIB module
383 objects→
OC-STB-HOST-MIB
The OC-STB-HOST-MIB module defines managed objects for monitoring and controlling OpenCable Set-top Host (STB) devices, specifically tracking host-side operational status, cable modem interface states, and service provisioning parameters within the DOCSIS/OpenCable architecture.
364 objects→
DOCS-IF31-MIB
SNMP MIB module
292 objects→
DOCS-PNM-MIB
SNMP MIB module
288 objects→
DOCS-QOS3-MIB
SNMP MIB module
240 objects→