CLAB-ANI-DEV-MIB
AI MIB Summary
The CLAB-ANI-DEV-MIB provides management objects for monitoring and configuring sRouter access network devices compliant with the CableLabs ANI architecture, specifically tracking device operational status, interface states, and protocol parameters within the cable infrastructure.
This MIB module contains the management objects for sRouter devices under the CableLabs Access Network Independent (ANI) project. Copyright 1999-2017 Cable Television Laboratories, Inc. All rights reserved.
Main OID:
clabAniDevMib.1.3.6.1.4.1.4491.4.7
18
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
clabAniDevMibThis MIB module contains the management objects for sRouter devices under the CableLabs Access Network Independent (ANI) project. Copyright 1999-2017 Cable Television Laboratories, Inc. All rights reserved. MODULE-IDENTITY .1.3.6.1.4.1.4491.4.7 |
clabAniDevObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.4.7.1 |
aniDevResetNowSetting this object to true(1) causes the device to reset. Reading this object always returns false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.4.7.1.1 |
clabAniDevSysLoggingObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.4.7.1.2 |
aniDevLoggingCtrlResetSetting this object to resetLog(1) empties the logging table. Setting this object to pauseLog(2) causes the ANI device to stop writing events to the logging table. Setting this object to startLog(3) causes the ANI device to start writing events to the logging table. Reading this object returns either pauseLog(2) or startLog(3). The default is startLog(3). Log event pausing is independent of any other log filtering mechanisms, e.g., levels. Setting it to useDefaultReporting(4) resets the log (i.e., empties) and returns all event levels to the factory-default reporting.rw Enumeration .1.3.6.1.4.1.4491.4.7.1.2.1 |
aniDevSysLoggingSizeSetting this object modifies the size of the system logging table. When set to zero, all entries are removed and new entries are not allowed to be added. When set less than the current size, the oldest entries are removed until the new size is reached.rw Unsigned32 UNITS "bytes" .1.3.6.1.4.1.4491.4.7.1.2.2 |
aniDevSysLoggingLevelCtrlThe current logging priority level for system messages. Setting a level sets all levels from the level specified to the highest severity level except for off. The level all indicates all levels. The log levels are derived from the log4j class. all(1) The all level has the lowest possible rank and is intended to turn on all logging. trace(2) The trace level designates finer-grained informational events than the DEBUG (see log4j class for further definition). debug(3) The debug level designates fine-grained informational events that are most useful to debug an application. info(4) The info level designates informational messages that highlight the progress of the application at coarse-grained level. warn(5) The warn level designates potentially harmful situations. error(6) The error level designates error events that might still allow the application to continue running. fatal(7) The fatal level designates very severe error events that will presumably lead the application to abort. off(8) The off has the highest possible rank and is intended to turn off logging.rw Enumeration .1.3.6.1.4.1.4491.4.7.1.2.3 |
aniDevSysLoggingGroupCtrlThe system 'group' or 'groups' to be logged. If all(1) is set, then other bits are ignored. If set to 'none(0)', messages that do not include a 'group' are candidates to be logged. Logging Groups for Event Logs are defined in the controlling Access Network Independent device specification for equipment implementing this MIB. Returns WrongValue error if an attempt is made to set the bit for a Logging Group not supported by the device.rw Bits .1.3.6.1.4.1.4491.4.7.1.2.4 |
aniDevSysLoggingEventTableThis table is a cyclic table of events. SEQUENCE OF AniDevSysLoggingEventEntry .1.3.6.1.4.1.4491.4.7.1.2.5 |
aniDevSysLoggingEventEntryA logging event entry. AniDevSysLoggingEventEntry .1.3.6.1.4.1.4491.4.7.1.2.5.1 |
aniDevSysLoggingEventIndexProvides relative ordering of the objects in the event log. This object will always increase except when (a) the log is reset via aniDevSysLoggingEventCtrlReset or (b) the device reboots and does not implement non-volatile storage for this log. The next entry for all the above cases is 1. Unsigned32 .1.3.6.1.4.1.4491.4.7.1.2.5.1.1 |
aniDevSysLoggingEventTimeStampThe time stamp of this event logging entry. The timestamp is established when the event occurs.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4491.4.7.1.2.5.1.2 |
aniDevSysLoggingEventMessageThe event message.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.4.7.1.2.5.1.3 |
clabAniDevConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4491.4.7.2 |
clabAniDevCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4491.4.7.2.1 |
clabAniDevComplianceThe compliance statement for CableLabs ANI devices. Unknown .1.3.6.1.4.1.4491.4.7.2.1.1 |
clabAniDevGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4491.4.7.2.2 |
clabAniDevGroupObject(s) implemented for the management of ANI devices. Unknown .1.3.6.1.4.1.4491.4.7.2.2.1 |