CL-PKTC-EUE-RST-MIB
AI MIB Summary
The CL-PKTC-EUE-RST-MIB module provides configuration objects for PacketCable RST (Real-Time Services) features on Cisco PacketCable Multimedia (PCMM) or PacketCable 1.0/2.0 network elements, specifically managing RST session parameters, resource allocation policies, and QoS enforcement mechanisms for real-time traffic flows.
This MIB module contains configuration MIB objects for supporting RST Features specified in the PacketCable RST specification.
Main OID:
pktcEUERSTMIB.1.3.6.1.4.1.4491.2.2.8.2
200
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
200 total| Object Name |
|---|
pktcEUERSTMIBThis MIB module contains configuration MIB objects for supporting RST Features specified in the PacketCable RST specification. MODULE-IDENTITY .1.3.6.1.4.1.4491.2.2.8.2 |
pktcEUERSTNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.0 |
pktcEUERSTObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1 |
pktcEUERSTProfile OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.1 |
pktcEUERSTProfileVersionThis MIB Object represents the RST Profile Version for this MIB module. The eUE MUST set this MIB Object to a value of '1.0'.ro SnmpAdminString .1.3.6.1.4.1.4491.2.2.8.2.1.1.1 |
pktcEUERSTAppProfileToFeatTableThis table specifies RST profiles that can be associated with Users supporting the RST application. SEQUENCE OF PktcEUERSTAppProfileToFeatEntry .1.3.6.1.4.1.4491.2.2.8.2.1.1.2 |
pktcEUERSTAppProfileToFeatEntryEach entry in this table specifies an RST profile associated with a set of RST features. PktcEUERSTAppProfileToFeatEntry .1.3.6.1.4.1.4491.2.2.8.2.1.1.2.1 |
pktcEUERSTAppProfileIndexThis MIB Object identifies an instance of an RST application profile. PktcEUETCRSTAppPrfIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.1.2.1.1 |
pktcEUERSTAppFeatIndexThis MIB Object identifies a specific RST feature instance. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.1.2.1.2 |
pktcEUERSTAppFeatIDThe MIB Object identifies a specific RST feature, as specified by PacketCable RST.rw PktcRSTTCFeatID .1.3.6.1.4.1.4491.2.2.8.2.1.1.2.1.3 |
pktcEUERSTAppFeatIndexRefThe MIB Object identifies an index into the RST feature table identified by the MIB Object pktcEUERSTAppFeatID. A value of '0' is reserved and is used to either identify a global feature configuration, or when no configuration data is specified for the feature. Setting the value to '0' in any other cases will result in feature configuration error.rw PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.1.2.1.4 |
pktcEUERSTAppNwActStatThe status of this feature as determined by the Network. The default value is true(1).rw PktcEUETCActStatus (CL-PKTC-EUE-TC-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.1.2.1.5 |
pktcEUERSTAppNwActStatInfoThis MIB Object MAY provide more information about the status reported by the MIB Object pktcEUERSTAppNwActStat.rw PktcEUETCActStatusInfo (CL-PKTC-EUE-TC-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.1.2.1.6 |
pktcEUERSTAppEUEActStatThe status of this feature as determined by the eUE.ro PktcEUETCActStatus (CL-PKTC-EUE-TC-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.1.2.1.7 |
pktcEUERSTAppEUEActStatInfoThis MIB Object MAY provide more information about the status reported by the MIB Object pktcEUERSTAppUEActStat.ro PktcEUETCActStatusInfo (CL-PKTC-EUE-TC-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.1.2.1.8 |
pktcEUERSTAppRowActStatusThis MIB Object defines the row status associated with this particular application profile in the MIB table. An entry in this table is not qualified for activation until the object instances of all corresponding columns have been initialized, either by default values or via explicit SET operations. Until all object instances in this row are initialized, the status value for this realm must be 'notReady(3)'. In particular, two columnar objects must be SET: the 'pktcEUERSTAppFeatID' and 'pktcEUERSTAppFeatIndexRef'. Once these two objects have been set the row status may be SET to 'active(1)'. The eUE MUST not allow these two objects to be changed while the row is 'active'. The value of this object has no effect on whether other columnar objects in this row can be modified.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4491.2.2.8.2.1.1.2.1.9 |
pktcEUERSTDigitMapFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.1.3 |
pktcEUERSTDMTimerTThis data element provides the Digit Map Timer T.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.1.3.1 |
pktcEUERSTDMTimerSThis data element provides the Digit Map Timer S.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.1.3.2 |
pktcEUERSTDMTimerLThis data element provides the Digit Map Timer L.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.1.3.3 |
pktcEUERSTDMTimerZThis data element provides the Digit Map Timer Z.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.1.3.4 |
pktcEUERSTDigitMapProfileTableThis table provides a Digit Map Profile. A Digit Map Profile may be shared by multiple Users SEQUENCE OF PktcEUERSTDigitMapProfileEntry .1.3.6.1.4.1.4491.2.2.8.2.1.1.3.5 |
pktcEUERSTDigitMapProfileEntryEach entry in this table provides a digit map profile. PktcEUERSTDigitMapProfileEntry .1.3.6.1.4.1.4491.2.2.8.2.1.1.3.5.1 |
pktcEUERSTDMIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.1.3.5.1.1 |
pktcEUERSTDMValueThis MIB Object specifies the ABNF for the Digit Map. Refer to the PacketCable RST Feature Specification for representation and validation details.ro OCTET STRING .1.3.6.1.4.1.4491.2.2.8.2.1.1.3.5.1.2 |
pktcEUERSTFeatures OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2 |
pktcEUERSTBasicCallFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.1 |
pktcEUERSTBasicCallTableThis data table represents User-based parameters associated with the Basic Call Feature for the RST Service. SEQUENCE OF PktcEUERSTBasicCallEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.1 |
pktcEUERSTBasicCallEntryEach entry in this data table describes an association of an user with a Basic Call Feature parameter. PktcEUERSTBasicCallEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.1.1 |
pktcEUERSTBCallIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.1.1.1 |
pktcEUERSTBCallSDPThis MIB Object specifies the SDP parameters and value.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.1.1.2 |
pktcEUERSTNfBasicCallTableThis data table represents Network-based parameters associated with the Basic Call Feature for the RST Service. SEQUENCE OF PktcEUERSTNfBasicCallEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2 |
pktcEUERSTNfBasicCallEntryEach entry in this data table describes an association of an Network Service Provider with a Basic Call Feature parameter. PktcEUERSTNfBasicCallEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1 |
pktcEUERSTNfBCallByeDelayThis MIB Object specifies the Bye Delay in seconds.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.1 |
pktcEUERSTNfBCallOrigDTTimerThis MIB Object specifies the Origination Mode Dial Tone Timer in seconds.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.2 |
pktcEUERSTNfBCallTermOHErrSigThis MIB Object specifies the Termination Mode Off-Hook error signal.rw PktcRSTTCTONEANNC .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.3 |
pktcEUERSTNfBCallTermErrSigTimerThis MIB Object specifies the Termination Mode error signal timer in seconds.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.4 |
pktcEUERSTNfBCallPermSeqTone1This MIB Object specifies the Permanent Sequence tone 1.rw PktcRSTTCTONEANNC .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.5 |
pktcEUERSTNfBCallPermSeqTimer1This MIB Object specifies the Permanent Sequence timer 1 in seconds.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.6 |
pktcEUERSTNfBCallPermSeqTone2This MIB Object specifies the Permanent Sequence tone 2.rw PktcRSTTCTONEANNC .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.7 |
pktcEUERSTNfBCallPermSeqTimer2This MIB Object specifies the Permanent Sequence timer 2 in seconds.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.8 |
pktcEUERSTNfBCallPermSeqTone3This MIB Object specifies the Permanent Sequence tone 3.rw PktcRSTTCTONEANNC .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.9 |
pktcEUERSTNfBCallPermSeqTimer3This MIB Object specifies the Permanent Sequence timer 3 in seconds.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.10 |
pktcEUERSTNfBCallLORTimerThis MIB Object specifies the Lockout Reset timer in seconds.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.11 |
pktcEUERSTNfBCallNEMDSCPValueThis MIB Object specifies the Non-Emergency media DSCP Value.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.1.2.1.12 |
pktcEUERSTAncFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.2 |
pktcEUERSTAncTableThis data table represents User-based parameters associated with the Announcement Feature for the RST Service. SEQUENCE OF PktcEUERSTAncEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.1 |
pktcEUERSTAncEntryEach entry in this data table describes an association of an user with an Announcement Feature parameter. PktcEUERSTAncEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.1.1 |
pktcEUERSTAncIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.1.1.1 |
pktcEUERSTAncPrefLangThis MIB Object specifies the preferred language for the UE announcement.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.1.1.2 |
pktcEUERSTNfAncTableThis data table represents Network-based parameters associated with the Announcement Feature for the RST Service. SEQUENCE OF PktcEUERSTNfAncEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.2 |
pktcEUERSTNfAncEntryEach entry in this data table describes an association of an Network Service Provider with a Announcement Feature parameter. PktcEUERSTNfAncEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.2.1 |
pktcEUERSTNfAncResThis MIB Object specifies the Announcement Resource URI for the media serverrw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.2.1.1 |
pktcEUERSTNfAncDomainThis MIB Object specifies the Announcement Domain.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.2.1.2 |
pktcEUERSTNfAncPathThis MIB Object specifies the Announcement Path.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.2.1.3 |
pktcEUERSTNfAncMIMETypeThis MIB Object specifies the Announcement MIME type.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.2.1.4 |
pktcEUERSTNfAncMapTableThis data table represents the network-based announcement MAP entries SEQUENCE OF PktcEUERSTNfAncMapEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.3 |
pktcEUERSTNfAncMapEntryThis data table represents the network-based announcement MAP entries. Each entry in this table represents the Announcement MAP entry URI corresponding to a response code. PktcEUERSTNfAncMapEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.3.1 |
pktcEUERSTNfAncRspCodeThis MIB Object specifies the Response code. Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.3.1.1 |
pktcEUERSTNfAncURIThis MIB Object specifies the Announcement Map entry. A string identifying the URI for response code.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.3.1.2 |
pktcEUERSTNfAncMediaMapTableThis data table represents the network-based announcement Media MAP entries SEQUENCE OF PktcEUERSTNfAncMediaMapEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.4 |
pktcEUERSTNfAncMediaMapEntryThis data table represents the announcement Media MAP entries. Each entry in this table represents the Announcement Media MAP entry URI corresponding to an announcement identifier. PktcEUERSTNfAncMediaMapEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.4.1 |
pktcEUERSTNfAncMediaIdThis MIB Object specifies the announcement Identifier. SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.4.1.1 |
pktcEUERSTNfAncMediaURIThis MIB Object specifies the Announcement Media Map entry. A string identifying the URI for announcement identifier.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.4.1.2 |
pktcEUERSTNfAncMediaCachMaxAgeThis MIB Object specifies the Announcement Media Cache maximum age in seconds.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.4.1.3 |
pktcEUERSTNfAncLocalMediaTableThis data table represents the network-based Local Media entries SEQUENCE OF PktcEUERSTNfAncLocalMediaEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.5 |
pktcEUERSTNfAncLocalMediaEntryEach entry in this table represents the Local Media entries. PktcEUERSTNfAncLocalMediaEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.5.1 |
pktcEUERSTNfAncLclMediaURIThis MIB Object specifies the Local Media entry. A string identifying the URI for the Local Media. SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.5.1.1 |
pktcEUERSTNfAncLclMediaTypeThis MIB Object specifies the Media Type entry.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.5.1.2 |
pktcEUERSTNfAncLclMediaDataThis MIB Object specifies the Media Data entry.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.2.5.1.3 |
pktcEUERSTUEActStatChgFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.3 |
pktcEUERSTUEActStatChgTableThis data table represents User-based parameters associated with the UE ActStatus Change Feature for the RST Service. SEQUENCE OF PktcEUERSTUEActStatChgEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.3.1 |
pktcEUERSTUEActStatChgEntryEach entry in this data table describes an association of an user with a UE ActStatus Change Feature parameter. PktcEUERSTUEActStatChgEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.3.1.1 |
pktcEUERSTUEActStatChgIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.3.1.1.1 |
pktcEUERSTUEActStatChgRegExpThis MIB Object specifies the UE ActStatus Registration expiration in seconds.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.3.1.1.2 |
pktcEUERSTNoAnsTimeoutFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.4 |
pktcEUERSTNoAnsTimeoutTableThis data table represents User-based parameters associated with the No Answer Timeout Feature for the RST Service. SEQUENCE OF PktcEUERSTNoAnsTimeoutEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.4.1 |
pktcEUERSTNoAnsTimeoutEntryEach entry in this data table describes an association of an user with a No Answer Timeout Feature parameter. PktcEUERSTNoAnsTimeoutEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.4.1.1 |
pktcEUERSTNoAnsTOIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.4.1.1.1 |
pktcEUERSTNoAnsTODurationThis MIB Object specifies the No Answer Timeout Duration in seconds.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.4.1.1.2 |
pktcEUERSTCallerIdFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.5 |
pktcEUERSTCIDTableThis data table represents User-based parameters associated with the Caller ID Feature for the RST Service. SEQUENCE OF PktcEUERSTCIDEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.5.1 |
pktcEUERSTCIDEntryEach entry in this data table describes an association of an user with a Caller ID Feature parameter. PktcEUERSTCIDEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.5.1.1 |
pktcEUERSTCIDIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.5.1.1.1 |
pktcEUERSTCIDPPSThis MIB Object specifies the Permanent Presentation ActStatus.rw Enumeration .1.3.6.1.4.1.4491.2.2.8.2.1.2.5.1.1.2 |
pktcEUERSTCIDDisFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.6 |
pktcEUERSTCIDDisTableThis data table represents User-based parameters associated with the Caller ID Display Feature for the RST Service. SEQUENCE OF PktcEUERSTCIDDisEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.6.1 |
pktcEUERSTCIDDisEntryEach entry in this data table describes an association of an user with a Caller ID Display Feature parameter. PktcEUERSTCIDDisEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.6.1.1 |
pktcEUERSTCIDDisIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.6.1.1.1 |
pktcEUERSTCIDDisCNDActActStatThis MIB Object specifies the activation status for Calling Number Display (CND).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.2.8.2.1.2.6.1.1.2 |
pktcEUERSTCIDDisCNAMDActActStatThis MIB Object specifies the activation status for Calling Name Display (CNAMD).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.2.8.2.1.2.6.1.1.3 |
pktcEUERSTCIDDisDefCountryThis MIB Object specifies default country code.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.6.1.1.4 |
pktcEUERSTCIDDisTimeAdjThis MIB Object specifies the adjustment from location invariant time to time at current location. The time delta in minutes.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.6.2 |
pktcEUERSTCIDCallBlkFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.7 |
pktcEUERSTCallBlkTableThis data table represents User-based parameters associated with the Call Block Feature for the RST Service. SEQUENCE OF PktcEUERSTCallBlkEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.7.1 |
pktcEUERSTCallBlkEntryEach entry in this data table describes an association of an user with a Call Block Feature parameter. PktcEUERSTCallBlkEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.7.1.1 |
pktcEUERSTCIDBlkIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.7.1.1.1 |
pktcEUERSTCIDCBlkConfToneThis MIB Object specifies the confirmation tone after vertical feature code.rw PktcRSTTCTONEANNC .1.3.6.1.4.1.4491.2.2.8.2.1.2.7.1.1.2 |
pktcEUERSTCIDCBlkErrToneThis MIB Object specifies the error tone after vertical feature code failure.rw PktcRSTTCTONEANNC .1.3.6.1.4.1.4491.2.2.8.2.1.2.7.1.1.3 |
pktcEUERSTCIDCallDelFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.8 |
pktcEUERSTCallDelTableThis data table represents User-based parameters associated with the Call Delivery Feature for the RST Service. SEQUENCE OF PktcEUERSTCallDelEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.8.1 |
pktcEUERSTCallDelEntryEach entry in this data table describes an association of an user with a Call Delivery Feature parameter. PktcEUERSTCallDelEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.8.1.1 |
pktcEUERSTCIDDelIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.8.1.1.1 |
pktcEUERSTCIDDelConfToneThis MIB Object specifies the confirmation tone after vertical feature code.rw PktcRSTTCTONEANNC .1.3.6.1.4.1.4491.2.2.8.2.1.2.8.1.1.2 |
pktcEUERSTCIDDelErrToneThis MIB Object specifies the error tone after vertical feature code failure.rw PktcRSTTCTONEANNC .1.3.6.1.4.1.4491.2.2.8.2.1.2.8.1.1.3 |
pktcEUERSTCFwdFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.9 |
pktcEUERSTCallFwdTableThis data table represents User-based parameters associated with the Call Forwarding Feature for the RST Service. SEQUENCE OF PktcEUERSTCallFwdEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.9.1 |
pktcEUERSTCallFwdEntryEach entry in this data table describes an association of an user with a Call Forwarding Feature parameter. PktcEUERSTCallFwdEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.9.1.1 |
pktcEUERSTCallFwdIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.9.1.1.1 |
pktcEUERSTCallFwdRingReminderThis MIB Object specifies the Call Forward Ring Reminder.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.2.8.2.1.2.9.1.1.2 |
pktcEUERSTCallFwdSubDurationThis MIB Object specifies the subscription duration in seconds.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.9.1.1.3 |
pktcEUERSTNfCallFwdTableThis data table represents the network-based Call Forwarding entries SEQUENCE OF PktcEUERSTNfCallFwdEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.9.2 |
pktcEUERSTNfCallFwdEntryEach entry in this table represents the Call Forwarding entries. PktcEUERSTNfCallFwdEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.9.2.1 |
pktcEUERSTNfCallFwdSpDialToneThis MIB Object specifies the special conditions dial tone when forwarded indicator.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.2.8.2.1.2.9.2.1.1 |
pktcEUERSTCallWaitFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.10 |
pktcEUERSTCallWaitTableThis data table represents User-based parameters associated with the Call Waiting Feature for the RST Service. SEQUENCE OF PktcEUERSTCallWaitEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.10.1 |
pktcEUERSTCallWaitEntryEach entry in this data table describes an association of an user with a Call Waiting Feature parameter. PktcEUERSTCallWaitEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.10.1.1 |
pktcEUERSTCWIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.10.1.1.1 |
pktcEUERSTCWDisStarCodeThis MIB Object specifies the per call call-waiting disable star code.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.10.1.1.2 |
pktcEUERSTCallHoldFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.11 |
pktcEUERSTCallHoldTableThis data table represents User-based parameters associated with the Call Hold Feature for the RST Service. SEQUENCE OF PktcEUERSTCallHoldEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.11.1 |
pktcEUERSTCallHoldEntryEach entry in this data table describes an association of an user with a Call Hold Feature parameter. PktcEUERSTCallHoldEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.11.1.1 |
pktcEUERSTCHIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.11.1.1.1 |
pktcEUERSTCHFeatCodeThis MIB Object specifies the Call Hold Feature Code.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.11.1.1.2 |
pktcEUERSTCHFeatConfirmThis MIB Object specifies the feature activation/deactivation confirmation indiacator.rw PktcRSTTCTONEANNC .1.3.6.1.4.1.4491.2.2.8.2.1.2.11.1.1.3 |
pktcEUERSTCallXfrFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.12 |
pktcEUERSTCallXfrTableThis data table represents User-based parameters associated with the Call Hold Transfer for the RST Service. SEQUENCE OF PktcEUERSTCallXfrEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.12.1 |
pktcEUERSTCallXfrEntryEach entry in this data table describes an association of an user with a Call Hold Transfer parameter. PktcEUERSTCallXfrEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.12.1.1 |
pktcEUERSTCXIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.12.1.1.1 |
pktcEUERSTCXNtfyTimeoutThis MIB Object specifies the Notify Timeout in seconds.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.12.1.1.2 |
pktcEUERSTDnDFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.13 |
pktcEUERSTDnDTableThis data table represents User-based parameters associated with the Do Not Disturb feature for the RST Service. SEQUENCE OF PktcEUERSTDnDEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.13.1 |
pktcEUERSTDnDEntryEach entry in this data table describes an association of an user with a Do Not Disturb parameter. PktcEUERSTDnDEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.13.1.1 |
pktcEUERSTDnDIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.13.1.1.1 |
pktcEUERSTDnDActConfirmThis MIB Object specifies the Feature Activation Confirmation Indicator.rw PktcRSTTCTONEANNC .1.3.6.1.4.1.4491.2.2.8.2.1.2.13.1.1.2 |
pktcEUERSTDnDDeActConfirmThis MIB Object specifies the Feature Deactivation Confirmation Indicator.rw PktcRSTTCTONEANNC .1.3.6.1.4.1.4491.2.2.8.2.1.2.13.1.1.3 |
pktcEUERSTMWIFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.14 |
pktcEUERSTNfMWITableThis data table represents the network-based MWI entries SEQUENCE OF PktcEUERSTNfMWIEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.14.1 |
pktcEUERSTNfMWIEntryEach entry in this table represents the MWI feature entries. PktcEUERSTNfMWIEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.14.1.1 |
pktcEUERSTNfMWISubDurationThis MIB Object specifies the MWI Subscription duration.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.14.1.1.1 |
pktcEUERSTAutoRclFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.15 |
pktcEUERSTAutoRclTableThis data table represents User-based parameters associated with the Auto Recall feature for the RST Service. SEQUENCE OF PktcEUERSTAutoRclEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.15.1 |
pktcEUERSTAutoRclEntryEach entry in this data table describes an association of an user with a Auto Recall parameter. PktcEUERSTAutoRclEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.15.1.1 |
pktcEUERSTARIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.15.1.1.1 |
pktcEUERSTARTimerThis MIB Object specifies the auto recall timer. This is minutes of feature duration.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.15.1.1.2 |
pktcEUERSTARSpRngDurationThis MIB Object specifies the auto recall special ring duration. This is the number of special ringing ring cycles.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.15.1.1.3 |
pktcEUERSTARSpRngRetryTimeThis MIB Object specifies the auto recall special ringing retry wait interval. This is seconds to wait between attempts to alert the user with special ringing.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.15.1.1.4 |
pktcEUERSTARSpRngRetriesThis MIB Object specifies the number of auto recall special ringing retries. This is the number of times to retry special ringing before canceling the AR request.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.15.1.1.5 |
pktcEUERSTARMaxSubSendThis MIB Object specifies the maximum number of simultaneous subscribes the UE should send.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.15.1.1.6 |
pktcEUERSTARMaxSubRecThis MIB Object specifies the maximum number of simultaneous subscriptions the UE should honor.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.15.1.1.7 |
pktcEUERSTAutoCbFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.16 |
pktcEUERSTAutoCbTableThis data table represents User-based parameters associated with the Auto Callback feature for the RST Service. SEQUENCE OF PktcEUERSTAutoCbEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.16.1 |
pktcEUERSTAutoCbEntryEach entry in this data table describes an association of an user with a Auto Callback parameter. PktcEUERSTAutoCbEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.16.1.1 |
pktcEUERSTACbIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.16.1.1.1 |
pktcEUERSTACbTimerThis MIB Object specifies the auto callback timer. This is minutes of feature duration. 0-30min. Default=30rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.16.1.1.2 |
pktcEUERSTACbSpRngDurationThis MIB Object specifies the auto callback special ring duration. This is the number of special ringing ring cycles.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.16.1.1.3 |
pktcEUERSTACbSpRngRetryTimeThis MIB Object specifies the auto callback special ringing retry wait interval. This is seconds to wait between attempts to alert the user with special ringing.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.16.1.1.4 |
pktcEUERSTACbSpRngRetriesThis MIB Object specifies the number of auto callback special ringing retries. This is the number of times to retry special ringing before canceling the AR request.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.16.1.1.5 |
pktcEUERSTACbMaxSubSendThis MIB Object specifies the maximum number of simultaneous subscribes the UE should send..rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.16.1.1.6 |
pktcEUERSTACbMaxSubRecThis MIB Object specifies the maximum number of simultaneous subscriptions the UE should honor.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.16.1.1.7 |
pktcEUERSTBusyLineVFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.17 |
pktcEUERSTNfBusyLineVTableThis data table represents the network-based Busy Line Verify Feature entries SEQUENCE OF PktcEUERSTNfBusyLineVEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.17.1 |
pktcEUERSTNfBusyLineVEntryEach entry in this table represents the Busy Line Verify feature entries. PktcEUERSTNfBusyLineVEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.17.1.1 |
pktcEUERSTNfBLVOperIdThis MIB Object specifies the Busy Line Verify Operator Id.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.4491.2.2.8.2.1.2.17.1.1.1 |
pktcEUERSTEmSvcFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.18 |
pktcEUERSTNfEmSvcTableThis data table represents the network-based Emergency Services Feature entries SEQUENCE OF PktcEUERSTNfEmSvcEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.18.1 |
pktcEUERSTNfEmSvcEntryEach entry in this table represents the Emergency Services feature entries. PktcEUERSTNfEmSvcEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.18.1.1 |
pktcEUERSTNfEmSvcNwHoldTimerThis MIB Object specifies the Emergency Services network hold timer in minutes.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.18.1.1.1 |
pktcEUERSTNfEmSvcHowlTimerThis MIB Object specifies the Emergency Services howler timer in seconds.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.18.1.1.2 |
pktcEUERSTNfEmSvcMediaDSCPValThis MIB Object specifies the Emergency Services emergency media DSCP value.rw Unsigned32 .1.3.6.1.4.1.4491.2.2.8.2.1.2.18.1.1.3 |
pktcEUERSTSCFFeat OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.1.2.19 |
pktcEUERSTSCFTableThis data table represents User-based parameters associated with the RST SCF Feature. SEQUENCE OF PktcEUERSTSCFEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.19.1 |
pktcEUERSTSCFEntryEach entry in this data table describes an association of an user with a SCF parameter. PktcEUERSTSCFEntry .1.3.6.1.4.1.4491.2.2.8.2.1.2.19.1.1 |
pktcEUERSTSCFIndexThis data element provides an index for the table. Values used for this index must be greater that zero and are not required to be sequential. This index value may be provided as data in other objects that reference this table. PktcEUETCRSTAppFeatIndexType .1.3.6.1.4.1.4491.2.2.8.2.1.2.19.1.1.1 |
pktcEUERSTSCFCFRingReminderThis MIB Object specifies the Call Forward Ring Reminder.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.2.8.2.1.2.19.1.1.2 |
pktcEUERSTConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.2 |
pktcEUERSTCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.2.1 |
pktcEUERSTMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.2.1 |
pktcEUERSTMIBComplianceThe compliance statement for implementations of the RST Mib Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.1.1 |
pktcEUERSTGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.2.2 |
pktcEUERSTMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.2.8.2.2.2 |
pktcEUERSTProfileGroupThe eUE RST Profile Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.1 |
pktcEUERSTBasicCallGroupThe RST Basic Call Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.2 |
pktcEUERSTAncGroupThe RST Announcement Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.3 |
pktcEUERSTUEStGroupThe RST UE ActStatus Change Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.4 |
pktcEUERSTNoAnsGroupThe RST No Answer Timeout Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.5 |
pktcEUERSTCallerIDGroupThe RST Caller ID Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.6 |
pktcEUERSTCallFwdGroupThe RST Call Forward Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.7 |
pktcEUERSTCallWaitGroupThe RST Call Waiting Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.8 |
pktcEUERSTCallHoldGroupThe RST Call Hold Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.9 |
pktcEUERSTCallTransGroupThe RST Call Transfer Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.10 |
pktcEUERSTDNDGroupThe RST Do Not Disturb Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.11 |
pktcEUERSTMWIGroupThe RST MWI Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.12 |
pktcEUERSTAutoRecallGroupThe RST Auto Recall Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.13 |
pktcEUERSTAutoCallbackGroupThe RST Auto Callback Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.14 |
pktcEUERSTBusyLineGroupThe RST Busy Line Verify Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.15 |
pktcEUERSTEmerSvcGroupThe RST Emergency Services Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.16 |
pktcEUERSTDigitMapGroupThe Digit Map Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.17 |
pktcEUERSTAppProfileGroupThe App Profile Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.18 |
pktcEUERSTSCFProfileGroupThe SCF Profile Group. Unknown .1.3.6.1.4.1.4491.2.2.8.2.2.2.19 |