CL-PKTC-EUE-EDVA-MIB
AI MIB Summary
The CL-PKTC-EUE-EDVA-MIB module provides configuration management for PacketCable Enhanced Dynamic Voice Admission (E-DVA) functions within CableLabs-compliant CMTS or edge router environments, enabling the monitoring and control of voice session admission policies, bandwidth allocation thresholds, and QoS parameters for real-time traffic.
This MIB module contains configuration MIB objects for the PacketCable E-DVA.
Main OID:
pktcEDVAMIB.pktcEUESpecificMib.1
52
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
52 total| Object Name |
|---|
pktcEDVAMIBThis MIB module contains configuration MIB
objects for the PacketCable E-DVA. MODULE-IDENTITY .pktcEUESpecificMib.1 |
pktcEDVANotification OBJECT IDENTIFIER .pktcEUESpecificMib.1.0 |
pktcEDVAObjects OBJECT IDENTIFIER .pktcEUESpecificMib.1.1 |
pktcEDVAProfileIDs OBJECT IDENTIFIER .pktcEUESpecificMib.1.1.2 |
pktcEDVALineNumberThis object MUST identify an endpoint or Line Number on an
E-DVA. A value of zero indicates that the E-DVA has
no endpoints Integer32 .pktcEUESpecificMib.1.1.2.1 |
pktcEDVAProfile OBJECT IDENTIFIER .pktcEUESpecificMib.1.1.3 |
pktcEDVAProfileVersionThis MIB Object represents the E-DVA Profile Version for this
MIB module. The eUE MUST set this MIB Object to a value of '1.0'.ro SnmpAdminString .pktcEUESpecificMib.1.1.3.1 |
pktcEDVANetDiscProfile OBJECT IDENTIFIER .pktcEUESpecificMib.1.1.3.2 |
pktcEDVANetDiscTableThis data table represents the Network Disconnect time
for each line provided by the E-DVA. SEQUENCE OF PktcEDVANetDiscEntry .pktcEUESpecificMib.1.1.3.2.1 |
pktcEDVANetDiscEntryEach entry in this data table describes the Network Disconnect
Time for the associated line. PktcEDVANetDiscEntry .pktcEUESpecificMib.1.1.3.2.1.1 |
pktcEDVANetDiscThis object specifies the time in mSec that the E-DVA
must remove DC bias when a call has been cleared by the network.
A value of zero (0) indicates that the E-DVA MUST NOT remove DC bias
when a call disconnects. The E-DVA MUST implement this element per
the E-DVA specification.rw Integer32 .pktcEUESpecificMib.1.1.3.2.1.1.1 |
pktcEDVAAnsSupProfile OBJECT IDENTIFIER .pktcEUESpecificMib.1.1.3.3 |
pktcEDVAAnsSupTableThis data table represents the Answer Supervision
for each line provided by the E-DVA. SEQUENCE OF PktcEDVAAnsSupEntry .pktcEUESpecificMib.1.1.3.3.1 |
pktcEDVAAnsSupEntryEach entry in this data table describes the Answer Supervision
for the associated line. PktcEDVAAnsSupEntry .pktcEUESpecificMib.1.1.3.3.1.1 |
pktcEDVAAnsSupThis object specifies the Answer Supervision state.
Answer Supervision (also called battery reversal, reverse DC bias,
or Reverse Loop Current Feed) is signaled when the distant end
answers a call originated by the CPE. Typically this signal is
used to notify electronic equipment such as PBXs which have a local
billing system that a call has been answered. When provisioned to do
so, the E-DVA may reverse DC bias when a call has been answered.
The default value for this object is 'false' indicating that
Answer Supervision is disabled (off).
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw TruthValue (SNMPv2-TC) .pktcEUESpecificMib.1.1.3.3.1.1.1 |
pktcEDVADtmfProfile OBJECT IDENTIFIER .pktcEUESpecificMib.1.1.3.4 |
pktcEDVADtmfRelayThis MIB Object represents the DTMF Relay status for the E-DVA.
The E-DVA must support the use of DTMF for both dialed digits
and for the relay of digits as part of an established session.
When dialing the DTMF, signaling MUST be collected at the E-DVA.
The digits are gathered according to the digit map and all digits
are sent in a single message.
If the value of this object is 'true' (on), the E-DVA must offer
DTMF relay within SDP upon session origination.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw TruthValue (SNMPv2-TC) .pktcEUESpecificMib.1.1.3.4.1 |
pktcEDVAPrLossProfile OBJECT IDENTIFIER .pktcEUESpecificMib.1.1.3.5 |
pktcEDVAPrLossTableThe DVA supports two provisioned loss parameters, one for
the D/A direction (towards the subscriber) and one for A/D
direction (from the subscriber) direction. This data table
represents the loss for each line provided by the E-DVA. SEQUENCE OF PktcEDVAPrLossEntry .pktcEUESpecificMib.1.1.3.5.1 |
pktcEDVAPrLossEntryThe DVA supports two provisioned loss parameters, one for
the D/A direction (towards the subscriber) and one for A/D
direction (from the subscriber) direction. This data table
represents the loss for each line provided by the E-DVA.
Each entry in this data table describes the loss
for the associated line. PktcEDVAPrLossEntry .pktcEUESpecificMib.1.1.3.5.1.1 |
pktcEDVAPrLossDAThis object specifies the provisioned loss parameter
for the D/A direction (towards the subscriber) in dB.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw Integer32 .pktcEUESpecificMib.1.1.3.5.1.1.1 |
pktcEDVAPrLossADThis object specifies the provisioned loss parameter
for the A/D direction (from the subscriber)in dB.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw Integer32 .pktcEUESpecificMib.1.1.3.5.1.1.2 |
pktcEDVADCBiasProfile OBJECT IDENTIFIER .pktcEUESpecificMib.1.1.3.6 |
pktcEDVADCBiasTableDCbias is the signaling method to indicate the Network/E-DVA
in/out of service state. The Operator is able to provision to
enable planned, scheduled service times to not be signaled as
an out of service state pending a maximum duration element.
This data table represents the On Hook In/Out of Service parameters
each line provided by the E-DVA. SEQUENCE OF PktcEDVADCBiasEntry .pktcEUESpecificMib.1.1.3.6.1 |
pktcEDVADCBiasEntryDCbias is the signaling method to indicate the Network/E-DVA
in/out of service state. The Operator is able to provision to
enable planned, scheduled service times to not be signaled as
an out of service state pending a maximum duration element.
This data table represents the On Hook In/Out of Service parameters
each line provided by the E-DVA.
Each entry in this data table describes the On Hook
In/Out of Service parameters for the associated line. PktcEDVADCBiasEntry .pktcEUESpecificMib.1.1.3.6.1.1 |
pktcEDVADCBiasSigThis object enables/disables the DCbias management per
provisioned values on a per telephony port basis.
A default value of '0'(false)indicates that DCbias must
perform per provisioned elements.
A value of '1' (true) indicates that the DCbias is not
controlled by the provisioned elements.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw TruthValue (SNMPv2-TC) .pktcEUESpecificMib.1.1.3.6.1.1.1 |
pktcEDVADCBiasMaxThis object specifies the maximum period of time,
in seconds, that a DCbias must be maintained following
an E-DVA reboot requiring a 'In-Service' State re-establishment.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw Integer32 .pktcEUESpecificMib.1.1.3.6.1.1.2 |
pktcEDVADCBiasHoldThis object specifies the period of time, in seconds,
that a DCbias must be maintained following an Out-of-Service
State. If the DCbiasHold duration expires, the DCbias must
be removed from the telephony port.
If the Network/E-DVA succeeds to re-establish the 'In-Service'
state during the DCbiasHold duration, the DCbiasHold must be
cancelled resulting in the DCbias being maintained on the
telephony port in support of normal telephony signaling
requirements.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw Integer32 .pktcEUESpecificMib.1.1.3.6.1.1.3 |
pktcEDVADCBiasEnableThis object specifies the delay time period prior to
reapplying DCbias on the E-DVA telephony port following the
re-establishment of the 'In-Service' state following a DCbias
removal. This avoids 'race' conditions between the Network/E-DVA
transitions from inappropriately signaling to the end user
security system.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw Integer32 .pktcEUESpecificMib.1.1.3.6.1.1.4 |
pktcEDVAMWISignalTypes OBJECT IDENTIFIER .pktcEUESpecificMib.1.1.3.7 |
pktcEDVAMWIToneIndThis is the MWI Tone Indicator.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw TruthValue (SNMPv2-TC) .pktcEUESpecificMib.1.1.3.7.1 |
pktcEDVAMWIAncIndThis is the MWI Voice Announcement Indication.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw TruthValue (SNMPv2-TC) .pktcEUESpecificMib.1.1.3.7.2 |
pktcEDVAMWIFSKIndThis is the MWI FSK Indication.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw TruthValue (SNMPv2-TC) .pktcEUESpecificMib.1.1.3.7.3 |
pktcEDVAMWIDTMFIndThis is the MWI DTMF Indication.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw TruthValue (SNMPv2-TC) .pktcEUESpecificMib.1.1.3.7.4 |
pktcEDVACodecProfile OBJECT IDENTIFIER .pktcEUESpecificMib.1.1.3.8 |
pktcEDVACodecG711PktThis object specifies the packetization period of a
G.711 payload.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw Integer32 (10 | 20 |30) .pktcEUESpecificMib.1.1.3.8.1 |
pktcEDVACodecT38This object specifies whether fax relay is enabled/disabled.
A value of 'true' (ON) enables fax relay on the E-DVA.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw TruthValue (SNMPv2-TC) .pktcEUESpecificMib.1.1.3.8.2 |
pktcEDVACodecV152This object specifies whether modem relay is enabled/disable.
A value of 'true' (ON) enables modem relay on the E-DVA.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw TruthValue (SNMPv2-TC) .pktcEUESpecificMib.1.1.3.8.3 |
pktcEDVACodecPubRepAddrTypeThis object specifies the domain for the address
specified in pktcEDVACodecPubRepAddr. If the elment
pktcEDVACodecPubRepAddr contains a valid IP address,
this element MUST be either 'ipv4(1)' or 'ipv6(2)' per
RFC3291.rw InetAddressType (INET-ADDRESS-MIB) .pktcEUESpecificMib.1.1.3.8.4 |
pktcEDVACodecPubRepAddrThis object specifies the network address that receives
the call statistics report from the E-DVA. Publish reports must
be sent at the end of each call if enabled.
This address is associated with the domain specified in
pktcEDVACodecPubRepAddrType.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw InetAddress (INET-ADDRESS-MIB) .pktcEUESpecificMib.1.1.3.8.5 |
pktcEDVACodecRTCPXRThis object specifies if extended reports for the sake of voice
metrics are included within RTCP packets. A value of 'true' (ON)
enables RTCP extended reports.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw TruthValue (SNMPv2-TC) .pktcEUESpecificMib.1.1.3.8.6 |
pktcEDVACodecRTCPRateThis object specifies the interval at which RTCP packets are
sent from the E-DVA. A value of zero for RTCP_RATE disables RTCP
transmission.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw Integer32 .pktcEUESpecificMib.1.1.3.8.7 |
pktcEDVATimeProfile OBJECT IDENTIFIER .pktcEUESpecificMib.1.1.3.9 |
pktcEDVATimeSyncThis object specifies time synchronization interval.
A PacketCable E-DVA must support a provisionable network time
synchronization interval. The time synchronization interval range
must be from 0 to 4320 hours (180 days) in increments of 1 hour.
A provisioned value of '0' indicates the E-DVA must NOT execute
network time resynchronization. The default network time
synchronization interface is 48 hours.
The E-DVA MUST implement this element per the PacketCable Residential
SIP Telephony E-DVA Specification.rw Integer32 .pktcEUESpecificMib.1.1.3.9.1 |
pktcEDVAAnnounceProfile OBJECT IDENTIFIER .pktcEUESpecificMib.1.1.3.10 |
pktcEDVAToneIdentifierThis MIB Object specifies the tone identifier for an E-DVA.rw OCTET STRING .pktcEUESpecificMib.1.1.3.10.1 |
pktcEDVAAudioAnnounceIdThis MIB Object specifies the audio announcement identifier
for an E-DVA.rw OCTET STRING .pktcEUESpecificMib.1.1.3.10.2 |
pktcEDVAConformance OBJECT IDENTIFIER .pktcEUESpecificMib.1.2 |
pktcEDVACompliances OBJECT IDENTIFIER .pktcEUESpecificMib.1.2.1 |
pktcEDVAMIBCompliances OBJECT IDENTIFIER .pktcEUESpecificMib.1.2.1 |
pktcEDVAGroups OBJECT IDENTIFIER .pktcEUESpecificMib.1.2.2 |
pktcEDVAMIBGroups OBJECT IDENTIFIER .pktcEUESpecificMib.1.2.2 |