Home/Catalog/CISCO-ATM-EXT-MIB

CISCO-ATM-EXT-MIB

AI MIB Summary

The CISCO-ATM-EXT-MIB extends Cisco's ATM management capabilities to monitor End-to-End and Segment Virtual Channel (VC) performance using F5 Operations, Administration, and Maintenance (OAM) cells for detecting degraded performance and Remote Defect Indications (RDI) across AAL5 connections. This module facilitates granular visibility into ATM virtual circuit states and network element health by tracking specific OAM cell types (AIS, RDI) and monitoring scopes between end stations and first-hop switches.

An extension to the Cisco ATM MIB module for managing ATM implementations. Acronyms and terms used in the MIB module: AAL5 AIS CC End-to-end Monitoring occurs on the entire VC between two ATM end stations. F5 OAM network elements (NEs) used within virtual connections to report degraded virtual channel performance. OAM and Maintenance. RDI Segment Monitoring occurs on a VC segment between a router and a first-hop ATM switch. VC VCC VCL REVISION

Main OID:

ciscoAtmExtMIB.cAal5VccExtMIBObjects.1

Objects

Active

Status

Dependencies

Imported Objects

Objects

35 total

Object Name	Syntax	OID
ciscoAtmExtMIBAn extension to the Cisco ATM MIB module for managing ATM implementations. Acronyms and terms used in the MIB module: AAL5 AIS CC End-to-end Monitoring occurs on the entire VC between two ATM end stations. F5 OAM network elements (NEs) used within virtual connections to report degraded virtual channel performance. OAM and Maintenance. RDI Segment Monitoring occurs on a VC segment between a router and a first-hop ATM switch. VC VCC VCL REVISION MODULE-IDENTITY `.cAal5VccExtMIBObjects.1`	MODULE-IDENTITY	`.cAal5VccExtMIBObjects.1`
cAal5VccExtTableThis table contains AAL5 VCC performance parameters beyond that provided by cAal5VccEntry. SEQUENCE OF CAal5VccExtEntry `.cAal5VccExtMIBObjects.1`	SEQUENCE OF CAal5VccExtEntry	`.cAal5VccExtMIBObjects.1`
cAal5VccExtEntryThis list contains the additinal AAL5 VCC performance parameters beyond that provided by cAal5VccEntry. CAal5VccExtEntry `.cAal5VccExtMIBObjects.1.1`	CAal5VccExtEntry	`.cAal5VccExtMIBObjects.1.1`
cAal5VccExtCompEnabledBoolean, if compression enabled for VCC.ro TruthValue (SNMPv2-TC) `.cAal5VccExtMIBObjects.1.1.1`	TruthValue (SNMPv2-TC)	`.cAal5VccExtMIBObjects.1.1.1`
cAal5VccExtVoiceBoolean, TRUE if VCC is used to carry voice.ro TruthValue (SNMPv2-TC) `.cAal5VccExtMIBObjects.1.1.2`	TruthValue (SNMPv2-TC)	`.cAal5VccExtMIBObjects.1.1.2`
cAal5VccExtInF5OamCellsNumber of OAM F5 end to end loopback cells received through the VCC.ro Counter32 `.cAal5VccExtMIBObjects.1.1.3`	Counter32	`.cAal5VccExtMIBObjects.1.1.3`
cAal5VccExtOutF5OamCellsNumber of OAM F5 end to end loopback cells sent through the VCC.ro Counter32 `.cAal5VccExtMIBObjects.1.1.4`	Counter32	`.cAal5VccExtMIBObjects.1.1.4`
ciscoAal5ExtMIBConformance OBJECT IDENTIFIER `.cAal5VccExtMIBObjects.1.2`	OBJECT IDENTIFIER	`.cAal5VccExtMIBObjects.1.2`
ciscoAal5ExtMIBCompliances OBJECT IDENTIFIER `.cAal5VccExtMIBObjects.1.2.1`	OBJECT IDENTIFIER	`.cAal5VccExtMIBObjects.1.2.1`
ciscoAal5ExtMIBGroups OBJECT IDENTIFIER `.cAal5VccExtMIBObjects.1.2.2`	OBJECT IDENTIFIER	`.cAal5VccExtMIBObjects.1.2.2`
catmxVclOamTableThis table contains Virtual Channel Link (VCL) Oam configuration and state information. This table augments the atmVclTable. SEQUENCE OF CatmxVclOamEntry `.catmxVcl.1`	SEQUENCE OF CatmxVclOamEntry	`.catmxVcl.1`
catmxVclOamEntryThis list contains Virtual Channel Link (VCL) configuration and state information beyond that provided by atmVclEntry. CatmxVclOamEntry `.catmxVcl.1.1`	CatmxVclOamEntry	`.catmxVcl.1.1`
catmxVclOamLoopbackFreqSpecifies OAM loopback frequency.rw Unsigned32 UNITS "seconds" `.catmxVcl.1.1.1`	Unsigned32 UNITS "seconds"	`.catmxVcl.1.1.1`
catmxVclOamRetryFreqSpecifies OAM retry polling frequency.rw Unsigned32 UNITS "seconds" `.catmxVcl.1.1.2`	Unsigned32 UNITS "seconds"	`.catmxVcl.1.1.2`
catmxVclOamUpRetryCountSpecifies OAM retry count before declaring a VC is up.rw Unsigned32 `.catmxVcl.1.1.3`	Unsigned32	`.catmxVcl.1.1.3`
catmxVclOamDownRetryCountSpecifies OAM retry count before declaring a VC is down.rw Unsigned32 `.catmxVcl.1.1.4`	Unsigned32	`.catmxVcl.1.1.4`
catmxVclOamEndCCActCountSpecifies OAM End-to-end Continuity check (CC) Activation retry count.rw Unsigned32 `.catmxVcl.1.1.5`	Unsigned32	`.catmxVcl.1.1.5`
catmxVclOamEndCCDeActCountSpecifies OAM End-to-end Continuity check (CC) Deactivation retry count.rw Unsigned32 `.catmxVcl.1.1.6`	Unsigned32	`.catmxVcl.1.1.6`
catmxVclOamEndCCRetryFreqSpecifies OAM End-to-end Continuity check (CC) Activation/Deactivation retry frequency.rw Unsigned32 UNITS "seconds" `.catmxVcl.1.1.7`	Unsigned32 UNITS "seconds"	`.catmxVcl.1.1.7`
catmxVclOamSegCCActCountSpecifies OAM Segment Continuity check (CC) Activation retry count.rw Unsigned32 `.catmxVcl.1.1.8`	Unsigned32	`.catmxVcl.1.1.8`
catmxVclOamSegCCDeActCountSpecifies OAM Segment Continuity check (CC) Deactivation retry count.rw Unsigned32 `.catmxVcl.1.1.9`	Unsigned32	`.catmxVcl.1.1.9`
catmxVclOamSegCCRetryFreqSpecifies OAM Segment Continuity check (CC) Activation/Deactivation retry frequency.rw Unsigned32 UNITS "seconds" `.catmxVcl.1.1.10`	Unsigned32 UNITS "seconds"	`.catmxVcl.1.1.10`
catmxVclOamManageSpecifies OAM Enable/Disable on the VC. true(1) indicates that OAM is enabled on the VC. false(2) indicates that OAM is disabled on the VC.rw TruthValue (SNMPv2-TC) `.catmxVcl.1.1.11`	TruthValue (SNMPv2-TC)	`.catmxVcl.1.1.11`
catmxVclOamLoopBkStatusIndicates OAM loopback status of the VC. disabled(1) sent(2) received(3) failed(4) ::= { catmxVclOamEntry 12 } catmxVclOamVcState OBJECT-TYPE SYNTAX INTEGER { downRetry(1), verified(2), notVerified(3), upRetry(4), aisRDI(5), aisOut(6), notManaged(7) } MAX-ACCESS read-only STATUS current DESCRIPTIONro Enumeration `.catmxVcl.1.1.13`	Enumeration	`.catmxVcl.1.1.13`
catmxVclOamEndCCStatusIndicates OAM End-to-end Continuity check (CC) status.ro OamCCStatus `.catmxVcl.1.1.14`	OamCCStatus	`.catmxVcl.1.1.14`
catmxVclOamSegCCStatusIndicates OAM Segment Continuity check (CC) status.ro OamCCStatus `.catmxVcl.1.1.15`	OamCCStatus	`.catmxVcl.1.1.15`
catmxVclOamEndCCVcStateIndicates OAM End-to-end Continuity check (CC) VC state.ro OamCCVcState `.catmxVcl.1.1.16`	OamCCVcState	`.catmxVcl.1.1.16`
catmxVclOamSegCCVcStateIndicates OAM Segment Continuity check (CC) VC state.ro OamCCVcState `.catmxVcl.1.1.17`	OamCCVcState	`.catmxVcl.1.1.17`
catmxVclOamCellsReceivedIndicates the number of OAM cells received on this VC.ro Counter32 UNITS "cells" `.catmxVcl.1.1.18`	Counter32 UNITS "cells"	`.catmxVcl.1.1.18`
catmxVclOamCellsSentIndicates the number of OAM cells sent on this VC.ro Counter32 UNITS "cells" `.catmxVcl.1.1.19`	Counter32 UNITS "cells"	`.catmxVcl.1.1.19`
catmxVclOamCellsDroppedIndicates the number of OAM cells dropped on this VC.ro Counter32 UNITS "cells" `.catmxVcl.1.1.20`	Counter32 UNITS "cells"	`.catmxVcl.1.1.20`
catmxVclOamInF5aisIndicates the number of received OAM F5 Alarm Indication Signal (AIS) cells from the VC.ro Counter32 UNITS "cells" `.catmxVcl.1.1.21`	Counter32 UNITS "cells"	`.catmxVcl.1.1.21`
catmxVclOamOutF5aisIndicates the number of transmitted OAM F5 Alarm Indication Signal (AIS) cells to the VC.ro Counter32 UNITS "cells" `.catmxVcl.1.1.22`	Counter32 UNITS "cells"	`.catmxVcl.1.1.22`
catmxVclOamInF5rdiIndicates the number of received OAM F5 Remote Detection Indication (RDI) cells from the VC.ro Counter32 UNITS "cells" `.catmxVcl.1.1.23`	Counter32 UNITS "cells"	`.catmxVcl.1.1.23`
catmxVclOamOutF5rdiIndicates the number of transmitted OAM F5 Remote Detection Indication (RDI) cells to the VC.ro Counter32 UNITS "cells" `.catmxVcl.1.1.24`	Counter32 UNITS "cells"	`.catmxVcl.1.1.24`