CIG-SERVERS-MIB
This module defines an interface configure Servers as Tftp and Dhcp servers. Copyright notice: This AVAYA SNMP Management Information Base Specification (Specification) embodies AVAYA confidential and Proprietary intellectual property. AVAYA retains all Title and ownership in the Specification, including any revisionsIt is AVAYA's intent to encourage the widespread use of this Specification in connection with the management of AVAYA products. AVAYA grants vendors, end-users, and other interested parties a non-exclusive license to use this Specification in connection with the management of AVAYA products.This Specification is supplied 'as is', and AVAYA makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
cigServers.1.3.6.1.4.1.6889.2.1.16
93
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
93 total| Object Name |
|---|
avaya OBJECT IDENTIFIER .1.3.6.1.4.1.6889 |
mibs OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2 |
lsg OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.1 |
cigServersThis module defines an interface configure Servers as Tftp and Dhcp servers. Copyright notice: This AVAYA SNMP Management Information Base Specification (Specification) embodies AVAYA confidential and Proprietary intellectual property. AVAYA retains all Title and ownership in the Specification, including any revisionsIt is AVAYA's intent to encourage the widespread use of this Specification in connection with the management of AVAYA products. AVAYA grants vendors, end-users, and other interested parties a non-exclusive license to use this Specification in connection with the management of AVAYA products.This Specification is supplied 'as is', and AVAYA makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6889.2.1.16 |
cigTftpServers OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.1.16.1 |
cigTftpServersNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.1.16.1.0 |
cigTftpServersDownloadFailureTrapTrap based on TFTP client failure to download file from gateway TFTP server. The Error code message strings are according RFC 1350: 0 Not defined 1 File not found. 2 Access violation. 3 Disk full or allocation exceeded. 4 Illegal TFTP operation. 5 Unknown transfer ID. 6 File already exists. 7 No such user. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.1.16.1.0.1 |
cigTftpServersUploadFailureTrapTrap based on TFTP client failure to upload file to gateway TFTP server. The Error code message strings are according RFC 1350: 0 Not defined 1 File not found. 2 Access violation. 3 Disk full or allocation exceeded. 4 Illegal TFTP operation. 5 Unknown transfer ID. 6 File already exists. 7 No such user. please note that the gateway TFTP server prevents uploading files to the device using TFTP client, pnly downloading files from the device. The upload files to the gateway TFTP server is by using LOAD-MIB. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.1.16.1.0.2 |
cigTftpServersGenConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.1.16.1.1 |
cigTftpServersModeEnable Tftp Server in the device. Default = False (Disable).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6889.2.1.16.1.1.1 |
cigTftpServersResetStatCountersreset (1) - Reset the TFTP Server Statistics. This object should be treated as write-only.rw Enumeration .1.3.6.1.4.1.6889.2.1.16.1.1.2 |
cigTftpServersMemoryAllocation OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.1.16.1.2 |
cigTftpServersTotalBytesUsedInNvramNumber of bytes used in nvram. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.1.2.1 |
cigTftpServersTotalBytesCapacityInNvramNumber of bytes capacity in nvram. Default = 131072.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.1.2.2 |
cigTftpServersTotalBytesUsedInRamNumber of bytes used in ram. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.1.2.3 |
cigTftpServersTotalBytesCapacityInRamNumber of bytes capacity in ram. Default = 20971520.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.1.2.4 |
cigTftpServersGenStats OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.1.16.1.3 |
cigTftpServersSuccessfulDownloadsNumber of tftp successful downloads. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.1.3.1 |
cigTftpServersNotDefinedErrorsNumber of tftp errors not defined - Error code==0. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.1.3.2 |
cigTftpServersFileNotFoundErrorsNumber of tftp errors of file not found - Error code == 1. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.1.3.3 |
cigTftpServersAccessViolationErrorsNumber of tftp errors of Access violation - Error code == 2. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.1.3.4 |
cigTftpServersDiskFullErrorsNumber of tftp errors of disk full - Error code == 3. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.1.3.5 |
cigTftpServersIllegalTFTPOperationErrorsNumber of tftp errors of illegal TFTP operation - Error code == 4. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.1.3.6 |
cigTftpServersUnknownTransferIdErrorsNumber of tftp errors of unknown transfer Id - Error code == 5. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.1.3.7 |
cigTftpServersFileAlreadyExistsErrorsNumber of tftp errors of file already exists - Error code == 6. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.1.3.8 |
cigTftpServersNoSuchUserErrorsNumber of tftp errors of no such user - Error code == 7. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.1.3.9 |
cigTftpServersDownloadTimeoutsNumber of tftp downloads timeouts. Timeouts occurs when ACK packets from client to Server did not reach the server.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.1.3.10 |
cigTftpServersNotificationPacket OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.1.16.1.4 |
cigTftpServersNotificationClientIpAddrThe TFTP client IP address. Default = 0.0.0.0ro IpAddress .1.3.6.1.4.1.6889.2.1.16.1.4.1 |
cigTftpServersNotificationFilenameThe filename that the TFTP client tried to upload/download. Default = ''ro DisplayString .1.3.6.1.4.1.6889.2.1.16.1.4.2 |
cigTftpServersNotificationErrorStringThe error string relevant to the Error occured during the last upload/download operation. Default = ''ro DisplayString .1.3.6.1.4.1.6889.2.1.16.1.4.3 |
cigDhcpServers OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.1.16.2 |
cigDhcpServersNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.1.16.2.0 |
cigDhcpServersClientConflictDetectionTrapDHCP IP address conflict detection. This trap is based on: 1. DHCP server send Ping packets before allocating new IP address. 2. The Client Decline Packets after the client sent gratuitous Arp and get response. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.1.16.2.0.1 |
cigDhcpServersServerNacksTrapServer refusal to extend lease or for other clients requests. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.1.16.2.0.2 |
cigDhcpServersNoIpAddressLeftNotification for no IP address left for specific network. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.1.16.2.0.3 |
cigDhcpServersGenConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.1.16.2.1 |
cigDhcpServersModeEnable Dhcp Server in the device. Default = False (Disable).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6889.2.1.16.2.1.1 |
cigDhcpServersResetStatCountersreset (1) - Reset the DHCP Server Statistics. This object should be treated as write-only.rw Enumeration .1.3.6.1.4.1.6889.2.1.16.2.1.2 |
cigDhcpServersPingDetectionModeEnable Dhcp Server sending one ping packet in order to detect IP address conflict. Default = False (Disable).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6889.2.1.16.2.1.3 |
cigDhcpServersPingDetectionTimeoutThe timeout in milliseconds of the ping packet send by the DHCP server to detect IP address conflict before allocating new IP address. The user can lower this timeout in case the hosts that recieved IP addresses are on the LAN. Otherwise if the hosts are on the WAN side then the timeout shall be higher the LAN. default 500 millisecondsrw Unsigned32 .1.3.6.1.4.1.6889.2.1.16.2.1.4 |
cigDhcpServersPool OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.1.16.2.2 |
cigDhcpServersPoolTableDhcp Pool General configuration table SEQUENCE OF CigDhcpServersPoolEntry .1.3.6.1.4.1.6889.2.1.16.2.2.1 |
cigDhcpServersPoolEntryThe pool general configuration table entry. CigDhcpServersPoolEntry .1.3.6.1.4.1.6889.2.1.16.2.2.1.1 |
cigDhcpServersPoolIndexThe Pool Index. G250/G350 - Up to 20 Pools are allowed.ro Integer32 .1.3.6.1.4.1.6889.2.1.16.2.2.1.1.1 |
cigDhcpServersPoolStartIPAddrThe Start IP Address of the pool. Default = 0.0.0.0. Stop IP address shall be large or equal to start IP address. The user shall be aware that for G350/G250 the number of IP addresses to be allocated in up to 256 IPs total in all the pools. Also if the user wants to completely change the start IP address/end IP address then the pool shall be Disabled and then by setting both these addresses (start/end) to default the user can set the new values. No need to erase the configuration of the pool for this case (I.e. in order not to loose all the DHCP options configuration). The user is not able to ocnfigure pools with overlapped IP addresses. StartIPaddress can be configured different than EndIPAddress only when Client identifier is not set.rw IpAddress .1.3.6.1.4.1.6889.2.1.16.2.2.1.1.2 |
cigDhcpServersPoolEndIPAddrThe End IP Address of the pool. Default = 0.0.0.0. End IP address shall be large or equal to start IP address. The user shall be aware that for G350/G250 the number of IP addresses to be allocated in up to 256 IPs total in all the pools. Also if the user wants to complete change the start IP address/end IP address then the pool shall be Disabled and then by setting both these addresses (start/end) to default the user can set the new values. No need to erase the configuration of the pool for this case (I.e. in order not to loose all the DHCP options configuration). The user is not able to ocnfigure pools with overlapped IP addresses. EndIPaddress can be configured different than StartIPAddress only when Client identifier is not set.rw IpAddress .1.3.6.1.4.1.6889.2.1.16.2.2.1.1.3 |
cigDhcpServersPoolModeEnable Dhcp Pool in the device. Default = False (Disable,Inactive). It is recommended to enable/activate the pool only after the user configures all the DHCP pool parameters. The user can changes the parameters when the pool is Enable/active. However part of the clients will have different configuration. After enabling the user will Disable the pool only before deleting it or keeping its ocnfiguration for later use. In Disable mode the binding information is lost. The user can not activate pool with start-ip-addr or end-ip-addr == 0.0.0.0.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6889.2.1.16.2.2.1.1.4 |
cigDhcpServersPoolNameName of this Pool. Pool Default Name: 'Dhcp Pool #Pool Number'rw DisplayString .1.3.6.1.4.1.6889.2.1.16.2.2.1.1.5 |
cigDhcpServersPoolClientIDClient identifier used for manual leased. The strcuture of the client identifier is as follows: combination of TYPE and Data. Where Type = 01 if for Ethernet MACs and Data for this case if Ethernet MAC address. Default: '' - Null String. In this case no client identifier is defined. ClientIdentifier can only configured when cigDhcpServersPoolStartIPAddr is equal to cigDhcpServersPoolEndIPAddr.rw OCTET STRING .1.3.6.1.4.1.6889.2.1.16.2.2.1.1.6 |
cigDhcpServersPoolLeaseTimeThe Pool leased time in seconds. Infinite is defined as 0xffffffff. default 691200 seconds = 8 days.rw Unsigned32 .1.3.6.1.4.1.6889.2.1.16.2.2.1.1.7 |
cigDhcpServersPoolBootFileBootFile Field in the Dhcp packet. Default Null String.rw DisplayString .1.3.6.1.4.1.6889.2.1.16.2.2.1.1.8 |
cigDhcpServersPoolNextServerNext Server Field in the Dhcp Packet. Default = 0.0.0.0rw IpAddress .1.3.6.1.4.1.6889.2.1.16.2.2.1.1.9 |
cigDhcpServersPoolSubnetMaskSubnet Mask is Dhcp option 1. Default = 255.255.255.0 There is no ability to configure this option in the general option table.rw IpAddress .1.3.6.1.4.1.6889.2.1.16.2.2.1.1.10 |
cigDhcpServersPoolDefaultGatewayDefault Gateway is Dhcp option 3. Default = '' = Null String. The format of the string can be up to 8 IP addresses, for exapmle: '121.23.1.12 135.64.13.190 192.123.242.230' There is no ability to configure this option in the general option table.rw DisplayString .1.3.6.1.4.1.6889.2.1.16.2.2.1.1.11 |
cigDhcpServersPoolDnsServerDNS Server is Dhcp option 6. Default = '' = Null String. The format of the string can be up to 8 IP addresses, for exapmle: '121.23.1.12 135.64.13.190 192.123.242.230' There is no ability to configure this option in the general option table.rw DisplayString .1.3.6.1.4.1.6889.2.1.16.2.2.1.1.12 |
cigDhcpServersPoolDomainNameDNS Server is Dhcp option 15. Default = Null String The format of the string can be: 'avaya' There is no ability to configure this option in the general option table.rw DisplayString .1.3.6.1.4.1.6889.2.1.16.2.2.1.1.13 |
cigDhcpServersPoolServerNameOptional Server Name. Default Null String.rw DisplayString .1.3.6.1.4.1.6889.2.1.16.2.2.1.1.14 |
cigDhcpServersPoolRowStatusUsed to create/delete a DHCP pool entry. The following values will be supported: - `active', which indicates that the conceptual row is available for use by the managed device; - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.1.16.2.2.1.1.15 |
cigDhcpServersPoolGenOptionTableDhcp Pool General Option configuration table SEQUENCE OF CigDhcpServersPoolGenOptionEntry .1.3.6.1.4.1.6889.2.1.16.2.2.2 |
cigDhcpServersPoolGenOptionEntryThe pool general option configuration table entry. The following option numbers are not configurable: Specific Options defined in the pool table: Option 1 - Subnet Mask Option 3 - Default Gateway Option 6 - Dns Servers Option 15 - Dns Name General Options that are not configurable according RFC2131, 2132: Option 0 - Pad Option Option 50 - Requested IP Address Option 51 - IP address Lease Time Option 52 - Option Overload Option 53 - Message Type Option 54 - Server Identifier Option 55 - Parameter Request List Option 56 - Message Option 57 - Maximum DHCP Message Size Option 58 - Renewal (T1) Time Value Option 59 - Rebinding (T2) Time Value Option 60 - Vendor Class Identifier Option 61 - Client Identifier Option 255 - End Option CigDhcpServersPoolGenOptionEntry .1.3.6.1.4.1.6889.2.1.16.2.2.2.1 |
cigDhcpServersOptionPoolIndexThe DHCP Pool Indexro Integer32 .1.3.6.1.4.1.6889.2.1.16.2.2.2.1.1 |
cigDhcpServersOptionIndexThe DHCP Option Index.ro Integer32 .1.3.6.1.4.1.6889.2.1.16.2.2.2.1.2 |
cigDhcpServersOptionNameName of this DHCP option. Option Default Name: 'Option #Option Number'rw DisplayString .1.3.6.1.4.1.6889.2.1.16.2.2.2.1.3 |
cigDhcpServersOptionTypeThe type of the DHCP option: ascii(1) is ASCII String as 'Avaya' hex(2) is HEX String as 'aa:bb:cc:dd:12:34:56' ipAddresses(3) can be array of up to 8 IP addresses with the structure as: '121.23.1.12 135.64.13.190 192.123.242.230' integer(4) - unsigned 32 bits integer word(5) - unsigned 16 bits integer The defaults of cigDhcpServersOptionValue shall be changed according setting the type. If setting Type == ascii(1) then the default is '' If setting Type == hex(2) then the default is '' If setting Type == ipAddresses(3) then the default is '0.0.0.0' If setting Type == integer(4) then the default is '00000000' If setting Type == word(5) then the default is '0000'rw Enumeration .1.3.6.1.4.1.6889.2.1.16.2.2.2.1.4 |
cigDhcpServersOptionValueThe Value of the DHCP option according the TYPE field. Maximum length is 255B in case of ascii or hex, 145B for ipaddresses, 4B for integer and 2B for word.rw OCTET STRING .1.3.6.1.4.1.6889.2.1.16.2.2.2.1.5 |
cigDhcpServersOptionRowStatusUsed to create/delete a DHCP option entry. The following values will be supported: - `active', which indicates that the conceptual row is available for use by the managed device; - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.1.16.2.2.2.1.6 |
cigDhcpServersPoolVendorSpecificOptionTableDhcp Pool Vendor Specific Option configuration table SEQUENCE OF CigDhcpServersPoolVendorSpecificOptionEntry .1.3.6.1.4.1.6889.2.1.16.2.2.3 |
cigDhcpServersPoolVendorSpecificOptionEntryThe pool Vendor Specific option configuration table entry. CigDhcpServersPoolVendorSpecificOptionEntry .1.3.6.1.4.1.6889.2.1.16.2.2.3.1 |
cigDhcpServersVendorSpecificOptionPoolIndexThe DHCP Pool Indexro Integer32 .1.3.6.1.4.1.6889.2.1.16.2.2.3.1.1 |
cigDhcpServersVendorSpecificOptionIndexThe DHCP Vendor Specific Option Index. G250/G350 - Up to 10 Vendor Specific options are allowed.ro Integer32 .1.3.6.1.4.1.6889.2.1.16.2.2.3.1.2 |
cigDhcpServersVendorSpecificOptionNameName of this DHCP Vednor specififc option. Vendor Specific Option Default Name: 'Vendor Specififc Option #Index Number'rw DisplayString .1.3.6.1.4.1.6889.2.1.16.2.2.3.1.3 |
cigDhcpServersVendorSpecificClassIdentifierThe vendor specific class identifier which transmit in option 60 by the client. Default is null stringrw DisplayString .1.3.6.1.4.1.6889.2.1.16.2.2.3.1.4 |
cigDhcpServersVendorSpecificOptionTypeThe type of the DHCP vendor specififc option: ascii(1) is ASCII String as 'Avaya' hex(2) is HEX String as 'aa:bb:cc:dd:12:34:56' The defaults of cigDhcpServersVendorSpecificOptionValue shall be changed according setting the type. If setting Type == ascii(1) then the default is '' If setting Type == hex(2) then the default is ''rw Enumeration .1.3.6.1.4.1.6889.2.1.16.2.2.3.1.5 |
cigDhcpServersVendorSpecificOptionValueThe Value of the DHCP vendor specififc option according the Type field. Maximum length is 255B in case of ascii or hex.rw OCTET STRING .1.3.6.1.4.1.6889.2.1.16.2.2.3.1.6 |
cigDhcpServersVendorSpecificOptionRowStatusUsed to create/delete a DHCP Vendor Specific option entry. The following values will be supported: - `active', which indicates that the conceptual row is available for use by the managed device; - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.1.16.2.2.3.1.7 |
cigDhcpServersGenStats OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.1.16.2.3 |
cigDhcpServersBootRequestsNumber of Boot Requests packets. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.2.3.1 |
cigDhcpServersDhcpDiscoversNumber of Dhcp Discovers packets. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.2.3.2 |
cigDhcpServersDhcpRequestsNumber of Dhcp Requests packets. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.2.3.3 |
cigDhcpServersDhcpDeclinesNumber of Dhcp Declines packets. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.2.3.4 |
cigDhcpServersDhcpReleasesNumber of Dhcp Releases packets. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.2.3.5 |
cigDhcpServersDhcpInformsNumber of Dhcp Informs packets. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.2.3.6 |
cigDhcpServersBootRepliesNumber of Boot Replies packets. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.2.3.7 |
cigDhcpServersDhcpOffersNumber of Dhcp Offers packets. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.2.3.8 |
cigDhcpServersDhcpAcksNumber of Dhcp Acknowledges packets. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.2.3.9 |
cigDhcpServersDhcpNacksNumber of Dhcp Nacks packets. Default = 0.ro Unsigned32 .1.3.6.1.4.1.6889.2.1.16.2.3.10 |
cigDhcpServersNotificationPacket OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.1.16.2.4 |
cigDhcpServersNotificationIpAddrThe relevant allocated IP address in DHCP/Bootp packet. Default = 0.0.0.0ro IpAddress .1.3.6.1.4.1.6889.2.1.16.2.4.1 |
cigDhcpServersNotificationClientIdentifierThe Client identifier used in the DHCP packet. The strcuture of the client identifier is as follows: combination of TYPE and Data. Where Type = 01 if for Ethernet MACs and Data for this case if Ethernet MAC address. Default: 01000000000000ro OCTET STRING .1.3.6.1.4.1.6889.2.1.16.2.4.2 |
cigDhcpServersNotificationClientHostNameThis mib item presents the Client Host name as send by client packet in option 12.ro OCTET STRING .1.3.6.1.4.1.6889.2.1.16.2.4.3 |
cigDhcpServersNotificationConflictDetectionMethodThe method which the DHCP server detect conflict. Using ping message by DHCP server or recieving Decline packet from the client as response to client gratuitous ARP.ro Enumeration .1.3.6.1.4.1.6889.2.1.16.2.4.4 |
cigDhcpServersNotificationPoolNetworkThis mib item presents cases where no IP address left for specific network. The network exhausted is the pool start/stop IP address AND subnet maskro IpAddress .1.3.6.1.4.1.6889.2.1.16.2.4.5 |