CIENA-6500R-INVENTORY-AMPS-MIB
AI MIB Summary
The CIENA-6500R-INVENTORY-AMPS-MIB enables SNMP-based inventory and status monitoring of optical photonic amplifiers within Ciena 6500R transport platforms, exposing specific metrics such as amplifier type, serial numbers, operational state, and optical power levels for fault isolation and capacity planning.
This modules describes Ciena's photonic amplifier object.
Main OID:
cienaRlsInventoryAmpsMIB.rlsInventoryAmps.1
66
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
66 total| Object Name |
|---|
cienaRlsInventoryAmpsMIBThis modules describes Ciena's photonic amplifier object. MODULE-IDENTITY .rlsInventoryAmps.1 |
rlsInventoryAmpsTable SEQUENCE OF RlsInventoryAmpsEntry .rlsInventoryAmps.1.1 |
rlsInventoryAmpsEntry RlsInventoryAmpsEntry .rlsInventoryAmps.1.1.1 |
rlsInventoryAmpsSlotNameThe name of the slot. DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.1 |
rlsInventoryAmpsNameAmplifier name. DisplayString128 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.2 |
rlsInventoryAmpsAmpModeControl Mode of the AMP.ro Enumeration .rlsInventoryAmps.1.1.1.3 |
rlsInventoryAmpsStateState the amp is in reported by the card.ro Enumeration .rlsInventoryAmps.1.1.1.4 |
rlsInventoryAmpsGainModeGain Mode of the AMP.ro Enumeration .rlsInventoryAmps.1.1.1.5 |
rlsInventoryAmpsForcedShutdownForced EDFA Shutoff State.ro Enumeration .rlsInventoryAmps.1.1.1.6 |
rlsInventoryAmpsTargetGainTarget Gain in dB.ro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.7 |
rlsInventoryAmpsBaselineTargetGainTarget Gain baseline in dB.ro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.8 |
rlsInventoryAmpsBaselineTimestampTime stamp for target gain baseline.ro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.9 |
rlsInventoryAmpsTargetGainRangesLowMinro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.10 |
rlsInventoryAmpsTargetGainRangesLowMaxro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.11 |
rlsInventoryAmpsTargetGainRangesHighMinro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.12 |
rlsInventoryAmpsTargetGainRangesHighMaxro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.13 |
rlsInventoryAmpsTargetPowerTarget Total Power in dBm.ro DisplayString32 UNITS "dBm" .rlsInventoryAmps.1.1.1.14 |
rlsInventoryAmpsTargetPowerRangesMinro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.15 |
rlsInventoryAmpsTargetPowerRangesMaxro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.16 |
rlsInventoryAmpsTargetGainTiltGain tilt in dB.ro DisplayString32 UNITS "dB" .rlsInventoryAmps.1.1.1.17 |
rlsInventoryAmpsTargetGainTiltRangesMinro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.18 |
rlsInventoryAmpsTargetGainTiltRangesMaxro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.19 |
rlsInventoryAmpsShutoffThresholdShutoff Threshold in dBm.ro DisplayString32 UNITS "dBm" .rlsInventoryAmps.1.1.1.20 |
rlsInventoryAmpsShutoffThresholdRangesMinro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.21 |
rlsInventoryAmpsShutoffThresholdRangesMaxro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.22 |
rlsInventoryAmpsShutoffHysteresisShutoff Hysteresis in dBm.ro DisplayString32 UNITS "dB" .rlsInventoryAmps.1.1.1.23 |
rlsInventoryAmpsInputLosThresholdThreshold at which to declare input loss of signal in dBm.ro DisplayString32 UNITS "dBm" .rlsInventoryAmps.1.1.1.24 |
rlsInventoryAmpsInputLosThresholdRangesMinro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.25 |
rlsInventoryAmpsInputLosThresholdRangesMaxro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.26 |
rlsInventoryAmpsInputLosHysteresisHysteresis at which to declare of clear the input loss of signal of signal alarm in dB.ro DisplayString32 UNITS "dB" .rlsInventoryAmps.1.1.1.27 |
rlsInventoryAmpsOrlThresholdThreshold at which to declare the optical return loss alarm.ro DisplayString32 UNITS "dB" .rlsInventoryAmps.1.1.1.28 |
rlsInventoryAmpsOrlThresholdRangesMinro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.29 |
rlsInventoryAmpsOrlThresholdRangesMaxro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.30 |
rlsInventoryAmpsLowOrlHysteresisHysteresis at which to declare low optical return loss alarm in dB.ro DisplayString32 UNITS "dB" .rlsInventoryAmps.1.1.1.31 |
rlsInventoryAmpsOrlStateThe ORL Statero OrlState (CIENA-6500R-TYPES-MIB) .rlsInventoryAmps.1.1.1.32 |
rlsInventoryAmpsGainOffsetGain Offset of the AMP in dB.ro DisplayString32 UNITS "dB" .rlsInventoryAmps.1.1.1.33 |
rlsInventoryAmpsGainOffsetRangesMinro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.34 |
rlsInventoryAmpsGainOffsetRangesMaxro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.35 |
rlsInventoryAmpsGainThe current gain of the amplifier in dB.ro DisplayString32 UNITS "dB" .rlsInventoryAmps.1.1.1.36 |
rlsInventoryAmpsMaxTargetPowerMaximum Target Power in dBm.ro DisplayString32 UNITS "dBm" .rlsInventoryAmps.1.1.1.37 |
rlsInventoryAmpsMaxTargetPowerRangesMinro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.38 |
rlsInventoryAmpsMaxTargetPowerRangesMaxro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.39 |
rlsInventoryAmpsAprThresholdThreshold at which the amplifier enters reduced power mode in dBm.ro DisplayString32 UNITS "dBm" .rlsInventoryAmps.1.1.1.40 |
rlsInventoryAmpsAprHysteresisHysteresis at which the amplifier enters reduced power mode in dB.ro DisplayString32 UNITS "dB" .rlsInventoryAmps.1.1.1.41 |
rlsInventoryAmpsForceAprForced APR.ro TruthValue (SNMPv2-TC) .rlsInventoryAmps.1.1.1.42 |
rlsInventoryAmpsAprPowerLevelPower level of the amplifier when the EDFA is in Automatic Power Reduction mode in dBm.ro DisplayString32 UNITS "dBm" .rlsInventoryAmps.1.1.1.43 |
rlsInventoryAmpsOverloadThresholdsInputPsdLowGainro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.44 |
rlsInventoryAmpsOverloadThresholdsInputPsdHighGainro DisplayString32 (CIENA-PRO-TYPES-MIB) .rlsInventoryAmps.1.1.1.45 |
rlsInventoryAmpsAdminStateResource administrative state.ro AdminState (CIENA-6500R-TYPES-MIB) .rlsInventoryAmps.1.1.1.46 |
rlsInventoryAmpsServiceStateService state of the amp.ro Enumeration .rlsInventoryAmps.1.1.1.47 |
rlsInventoryAmpsInCurrPowerInput power to the AMP in dBm.ro DisplayString32 UNITS "dBm" .rlsInventoryAmps.1.1.1.48 |
rlsInventoryAmpsInMinPowerMinimum tidemarked input power to the AMP in dBm. This should be the min power measured since the last measuremnt request in dBm.ro DisplayString32 UNITS "dBm" .rlsInventoryAmps.1.1.1.49 |
rlsInventoryAmpsInMaxPowerMaximum tidemarked input power to the AMP in dBm. This should be the max power measured since the last measuremnt request.ro DisplayString32 UNITS "dBm" .rlsInventoryAmps.1.1.1.50 |
rlsInventoryAmpsOutCurrPowerOutput power from the AMP in dBm.ro DisplayString32 UNITS "dBm" .rlsInventoryAmps.1.1.1.51 |
rlsInventoryAmpsOutMinPowerMinimum tidemarked output power from the AMP in dBm. This should be the min power measured since the last measuremnt request.ro DisplayString32 UNITS "dBm" .rlsInventoryAmps.1.1.1.52 |
rlsInventoryAmpsOutMaxPowerMaximum tidemarked output power from the AMP in dBm. This should be the max power measured since the last measuremnt request in dBm.ro DisplayString32 UNITS "dBm" .rlsInventoryAmps.1.1.1.53 |
rlsInventoryAmpsOpticalReturnLossOptical return loss (ORL) is the amount of light that is reflected back up the fiber toward the source by
light reflections off the interface of the polished end surface of the mated connectors and air, you should
probably check you connection in dBro DisplayString32 UNITS "dB" .rlsInventoryAmps.1.1.1.54 |
rlsInventoryAmpsDiagnosticInputLossSignalInput Loss of Signal.ro TruthValue (SNMPv2-TC) .rlsInventoryAmps.1.1.1.55 |
rlsInventoryAmpsDiagnosticShutoffThresholdCrossedShutoff Threshold Crossed.ro TruthValue (SNMPv2-TC) .rlsInventoryAmps.1.1.1.56 |
rlsInventoryAmpsDignosticAutomaticShutoffAutomatic Shutoff.ro TruthValue (SNMPv2-TC) .rlsInventoryAmps.1.1.1.57 |
rlsInventoryAmpsDiagnosticAutomaticPowerReductionActiveAutomatic Power Reduction Active.ro TruthValue (SNMPv2-TC) .rlsInventoryAmps.1.1.1.58 |
rlsInventoryAmpsDignosticParentFailedParent Object Failed.ro TruthValue (SNMPv2-TC) .rlsInventoryAmps.1.1.1.59 |
rlsInventoryAmpsDignosticOpticalLineFailedOptical Line Failed.ro TruthValue (SNMPv2-TC) .rlsInventoryAmps.1.1.1.60 |
rlsInventoryAmpsDignosticLowOpticalReturnLossLow Optical Return Loss.ro TruthValue (SNMPv2-TC) .rlsInventoryAmps.1.1.1.61 |
rlsInventoryAmpsDignosticLossOfSignalLoss of Signal.ro TruthValue (SNMPv2-TC) .rlsInventoryAmps.1.1.1.62 |
rlsInventoryAmpsDignosticInputOpticalOverloadInput Optical Overload.ro TruthValue (SNMPv2-TC) .rlsInventoryAmps.1.1.1.63 |