CHIPMODULE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CHIPMODULE-MIB.
586
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
586 total| Object Name |
|---|
chipcom OBJECT IDENTIFIER .1.3.6.1.4.1.49 |
RFC1155-SMI Unknown .1.3.6.1.4.1.49 |
chipmib02 OBJECT IDENTIFIER .1.3.6.1.4.1.49.2 |
chipGen OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.1 |
chipEcho OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.2 |
chipProducts OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3 |
online OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1 |
olAgents OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.1 |
olConc OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.2 |
olEnv OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.3 |
olModules OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4 |
olSpecMods OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4 |
ol50nnMCTL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.3 |
ol50nnMCTLModTableA table that contains information about each 50nnM-CTL
in the concentrator. Note, current architecture will
limit the number of instances to one per concentrator. SEQUENCE OF Ol50nnMCTLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.3.1 |
ol50nnMCTLModEntryA list of information for each 50nnM-CTL module
in the concentrator. Ol50nnMCTLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.3.1.1 |
ol50nnMCTLModSlotIndexThe slot number for this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.3.1.1.1 |
ol50nnMCTLModTempStatusThe temperature as detected by the probes on this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.3.1.1.2 |
ol51nnMMGT OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.4 |
ol51nnMMGTModTableA table that contains module information about each
51nnM-MGT module in the concentrator. SEQUENCE OF Ol51nnMMGTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.4.1 |
ol51nnMMGTModEntryA list of module information for each 51nnM-MGT module
in the concentrator. Ol51nnMMGTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.4.1.1 |
ol51nnMMGTModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.4.1.1.1 |
ol51nnMMGTModMasterPriorityThe mastership priority of this agent. Ten is the
highest and one is the lowest. Priority is
only used when an election occurs. Mastership is not
preemptive unless the reset mastership command is used.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.4.1.1.2 |
ol51nnMMGTModMasterStatusThe mastership status of this agent.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.4.1.1.3 |
ol51nnMMGTModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the mac address of port 1. Note
that EMMs before v3.0 will have 00-00-00-00-00-00 as their
station address.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.4.1.1.4 |
ol51nnMMGTPortTableA table of information that contains port-specific
information for each port on each 51nnM-MGT module. SEQUENCE OF Ol51nnMMGTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.4.2 |
ol51nnMMGTPortEntryA list of information about a specific port on a
51nnM-MGT module. Ol51nnMMGTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.4.2.1 |
ol51nnMMGTPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.4.2.1.1 |
ol51nnMMGTPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.4.2.1.2 |
ol51nnMMGTIpAddressThe IP Address associated with this port.ro IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.4.2.1.3 |
ol51nnMFIB OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.5 |
ol51nnMFIBModTableA table of module-specific information for each
51nnM-FIB module in the concentrator. SEQUENCE OF Ol51nnMFIBModEntry .1.3.6.1.4.1.49.2.3.1.4.4.5.1 |
ol51nnMFIBModEntryA list of module-specific information associated
with a particular 51nnM-FIB module in the concentrator. Ol51nnMFIBModEntry .1.3.6.1.4.1.49.2.3.1.4.4.5.1.1 |
ol51nnMFIBModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.5.1.1.1 |
ol51nnMFIBModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.5.1.1.2 |
ol51nnMFIBModLLWThe current state of this module's low light warning
configuration. Enabling this feature causes the module to
check for low light and to issue a warning if low light is
present. Disabling low light has the advantage of faster
redundancy switchover in the event of a port error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.5.1.1.3 |
ol51nnMFIBModDipLLWThe low light warning configuration indicated by this module's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.5.1.1.4 |
ol51nnMFIBPortTableA table of port-specific information for each port
of each 51nnM-FIB module. SEQUENCE OF Ol51nnMFIBPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.5.2 |
ol51nnMFIBPortEntryA list of information about a specific port on a
51nnM-FIB module. Ol51nnMFIBPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.5.2.1 |
ol51nnMFIBPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.1 |
ol51nnMFIBPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.2 |
ol51nnMFIBPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.3 |
ol51nnMFIBPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.4 |
ol51nnMFIBPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.5 |
ol51nnMFIBPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.6 |
ol51nnMUTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.6 |
ol51nnMUTPModTableA list of module-specific information associated
with a particular 51nnM-UTP module in the concentrator. SEQUENCE OF Ol51nnMUTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.6.1 |
ol51nnMUTPModEntryA module entry containing objects that describe the
module level for that particular module. Ol51nnMUTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.6.1.1 |
ol51nnMUTPModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.1 |
ol51nnMUTPModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.2 |
ol51nnMUTPModCrossoverThe current state of this module's crossover
configuration. Setting this object to uncrossed(2)
allows the last port to be used to connect to another
repeater. Often this feature is used to connect one 10BASE-T
module to another.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.3 |
ol51nnMUTPModDipCrossoverThe crossover configuration indicated by this module's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.4 |
ol51nnMUTPModFFLThe number of bits to store in the repeater's fifo
buffer. See the module user's guide for more information.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.5 |
ol51nnMUTPModDipFFLThe fifo fill level as indicated by this module's dip
switches.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.6 |
ol51nnMUTPPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMUTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.6.2 |
ol51nnMUTPPortEntryA port entry containing objects that describe this port. Ol51nnMUTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1 |
ol51nnMUTPPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.1 |
ol51nnMUTPPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.2 |
ol51nnMUTPPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.3 |
ol51nnMUTPPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.4 |
ol51nnMUTPPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.5 |
ol51nnMUTPPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.6 |
ol51nnMUTPPortLinkIntegThe port's link integrity configuration. Enabling
link integrity configures the port to conform to
the link integrity feature as specified by 10BASE-T.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.7 |
ol51nnMUTPPortDipLinkIntegThe link integrity configuration as indicated by this
port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.8 |
ol51nnMUTPPortSquelchThe port's squelch configuration. See the module's
user's guide for more information.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.9 |
ol51nnMUTPPortDipSquelchThe port's squelch configuration as indicated by this
port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.10 |
ol51nnMTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.7 |
ol51nnMTPModTableA table of module-specific information for each
51nnM-TP module in the concentrator. SEQUENCE OF Ol51nnMTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.7.1 |
ol51nnMTPModEntryA list of module-specific information about a
specific 51nnM-TP module in the concentrator. Ol51nnMTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.7.1.1 |
ol51nnMTPModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.7.1.1.1 |
ol51nnMTPModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.1.1.2 |
ol51nnMTPModCrossoverThe current state of this module's crossover
configuration. Setting this object to uncrossed(2)
allows the last port to be used to connect to another
repeater. Often this feature is used to connect one 10BASE-T
module to another.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.1.1.3 |
ol51nnMTPModDipCrossoverThe crossover configuration indicated by this module's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.1.1.4 |
ol51nnMTPPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.7.2 |
ol51nnMTPPortEntryA port entry containing objects that describe this port. Ol51nnMTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1 |
ol51nnMTPPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.1 |
ol51nnMTPPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.2 |
ol51nnMTPPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.3 |
ol51nnMTPPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.4 |
ol51nnMTPPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.5 |
ol51nnMTPPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.6 |
ol51nnMTPPortLinkIntegThe port's link integrity configuration. Enabling
link integrity configures the port to conform to
the link integrity feature as specified by 10BASE-T.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.7 |
ol51nnMTPPortDipLinkIntegThe link integrity configuration as indicated by this
port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.8 |
ol51nnMTPPortSquelchThe port's squelch configuration. See the module's
user's guide for more information.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.9 |
ol51nnMTPPortDipSquelchThe port's squelch configuration as indicated by this
port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.10 |
ol51nnMBNC OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.8 |
ol51nnMBNCModTableA list of module-specific information associated
with a particular 51nnM-BNC module in the concentrator. SEQUENCE OF Ol51nnMBNCModEntry .1.3.6.1.4.1.49.2.3.1.4.4.8.1 |
ol51nnMBNCModEntryA module entry containing objects that describe the
module level for that particular module. Ol51nnMBNCModEntry .1.3.6.1.4.1.49.2.3.1.4.4.8.1.1 |
ol51nnMBNCModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.8.1.1.1 |
ol51nnMBNCModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.8.1.1.2 |
ol51nnMBNCPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMBNCPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.8.2 |
ol51nnMBNCPortEntryA port entry containing objects that describe this port. Ol51nnMBNCPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.8.2.1 |
ol51nnMBNCPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.8.2.1.1 |
ol51nnMBNCPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.8.2.1.2 |
ol51nnMBNCPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.8.2.1.3 |
ol51nnMBNCPortDipTerminationThe state of this port's termination as indicated by the
port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.8.2.1.4 |
ol51nnMBNCPortDipGroundThe state of this port's ground as indicated by the port's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.8.2.1.5 |
ol51nnBEE OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.9 |
ol51nnBEEModTableA table of module-specific information for
each 51nnB-EE module in the concentrator. SEQUENCE OF Ol51nnBEEModEntry .1.3.6.1.4.1.49.2.3.1.4.4.9.1 |
ol51nnBEEModEntryA list of module-specific information about a specific
51nnB-EE module in the concentrator. Ol51nnBEEModEntry .1.3.6.1.4.1.49.2.3.1.4.4.9.1.1 |
ol51nnBEEModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.9.1.1.1 |
ol51nnBEEModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the mac address of port 1.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.9.1.1.2 |
ol51nnBEEModProtocolsA textual description of the protocols supported by
this modulero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.49.2.3.1.4.4.9.1.1.3 |
ol51nnBEEPortTableA table of port-specific for each port of each
51nnBEE module in the concentrator. SEQUENCE OF Ol51nnBEEPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.9.2 |
ol51nnBEEPortEntryA list of port-specific informatoin about a specific
51nnB-EE port in the concentrator. Ol51nnBEEPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.9.2.1 |
ol51nnBEEPortSlotIndexThe slot number for this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.9.2.1.1 |
ol51nnBEEPortIndexThe port number for this port within this slot.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.9.2.1.2 |
ol51nnBEEPortIpAddressThe IP Address associated with this port.ro IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.9.2.1.3 |
ol51nnBEEPortDipNetworkThe network for this port as specified by this port's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.9.2.1.4 |
ol51nnBEEPortDefNetworkThe network for this port as specified by the OEBM's
non-volatile storage.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.9.2.1.5 |
ol51nnRES OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.10 |
ol51nnRESModTableA table of module-specific information for
each 51nnR-ES module in the concentrator. SEQUENCE OF Ol51nnRESModEntry .1.3.6.1.4.1.49.2.3.1.4.4.10.1 |
ol51nnRESModEntryA list of module-specific information about a specific
51nnR-ES module in the concentrator. Ol51nnRESModEntry .1.3.6.1.4.1.49.2.3.1.4.4.10.1.1 |
ol51nnRESModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.10.1.1.1 |
ol51nnRESModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the mac address of port 1.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.10.1.1.2 |
ol51nnRESModProtocolsA textual description of the protocols supported by
this modulero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.49.2.3.1.4.4.10.1.1.3 |
ol51nnRESPortTableA table of port-specific for each port of each
51nnR-ES module in the concentrator. SEQUENCE OF Ol51nnRESPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.10.2 |
ol51nnRESPortEntryA list of port-specific informatoin about a specific
51nnR-ES port in the concentrator. Ol51nnRESPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.10.2.1 |
ol51nnRESPortSlotIndexThe slot number for this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.10.2.1.1 |
ol51nnRESPortIndexThe port number for this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.10.2.1.2 |
ol51nnRESPortIpAddressThe IP Address associated with this port.ro IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.10.2.1.3 |
ol51nnRESPortDipNetworkThe network for this port as specified by this port's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.10.2.1.4 |
ol51nnRESPortDefNetworkThe network for this port as specified by the OERM's
non-volatile storage.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.10.2.1.5 |
ol51nnREE OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.11 |
ol51nnREEModTableA table of module-specific information for
each 51nnR-EE module in the concentrator. SEQUENCE OF Ol51nnREEModEntry .1.3.6.1.4.1.49.2.3.1.4.4.11.1 |
ol51nnREEModEntryA list of module-specific information about a specific
51nnR-EE module in the concentrator. Ol51nnREEModEntry .1.3.6.1.4.1.49.2.3.1.4.4.11.1.1 |
ol51nnREEModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.11.1.1.1 |
ol51nnREEModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the mac address of port 1.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.11.1.1.2 |
ol51nnREEModProtocolsA textual description of the protocols supported by
this modulero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.49.2.3.1.4.4.11.1.1.3 |
ol51nnREEPortTableA table of port-specific for each port of each
51nnR-EE module in the concentrator. SEQUENCE OF Ol51nnREEPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.11.2 |
ol51nnREEPortEntryA list of port-specific informatoin about a specific
51nnR-EE port in the concentrator. Ol51nnREEPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.11.2.1 |
ol51nnREEPortSlotIndexThe slot number for this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.11.2.1.1 |
ol51nnREEPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.11.2.1.2 |
ol51nnREEPortIpAddressThe IP Address associated with this port.ro IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.11.2.1.3 |
ol51nnREEPortDipNetworkThe network for this port as specified by this port's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.11.2.1.4 |
ol51nnREEPortDefNetworkThe network for this port as specified by the OERM's
non-volatile storage.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.11.2.1.5 |
ol51nnMAUIF OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.12 |
ol51nnMAUIFModTableA list of module-specific information associated
with a particular 51nnMAUIF module in the concentrator. SEQUENCE OF Ol51nnMAUIFModEntry .1.3.6.1.4.1.49.2.3.1.4.4.12.1 |
ol51nnMAUIFModEntryA list of module-specific information about a specific
51nnMAUIF module in the concentrator. Ol51nnMAUIFModEntry .1.3.6.1.4.1.49.2.3.1.4.4.12.1.1 |
ol51nnMAUIFModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.12.1.1.1 |
ol51nnMAUIFPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMAUIFPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.12.2 |
ol51nnMAUIFPortEntryA list of module-specific information about a specific
51nnM-AUIF port in the concentrator. Ol51nnMAUIFPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1 |
ol51nnMAUIFPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.1 |
ol51nnMAUIFPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.2 |
ol51nnMAUIFPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.3 |
ol51nnMAUIFPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.4 |
ol51nnMAUIFPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.5 |
ol51nnMAUIFPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.6 |
ol51nnMAUIFPortDipNetworkThe network indicated by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.7 |
ol51nnMAUIM OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.13 |
ol51nnMAUIMModTableA list of module-specific information associated
with a particular 51nnM-AUIM module in the concentrator. SEQUENCE OF Ol51nnMAUIMModEntry .1.3.6.1.4.1.49.2.3.1.4.4.13.1 |
ol51nnMAUIMModEntryA list of module-specific information about a specific
51nnM-AUIM module in the concentrator. Ol51nnMAUIMModEntry .1.3.6.1.4.1.49.2.3.1.4.4.13.1.1 |
ol51nnMAUIMModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.13.1.1.1 |
ol51nnMAUIMPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMAUIMPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.13.2 |
ol51nnMAUIMPortEntryA list of module-specific information about a specific
51nnM-AUIM port in the concentrator. Ol51nnMAUIMPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1 |
ol51nnMAUIMPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.1 |
ol51nnMAUIMPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.2 |
ol51nnMAUIMPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.3 |
ol51nnMAUIMPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.4 |
ol51nnMAUIMPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.5 |
ol51nnMAUIMPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.6 |
ol51nnMAUIMPortDipNetworkThe network indicated by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.7 |
ol51nnMAUIMPortSQETestThe current SQE test configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.8 |
ol51nnMAUIMPortDipSQETestThe SQE test configuration for this port as indicated
by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.9 |
ol51nnMAUIMPortCollisionThe current collision configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.10 |
ol51nnMAUIMPortDipCollisionThe collision configuration for this port as indicated
by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.11 |
ol51nnMAUIMPortHalfStepThe current step configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.12 |
ol51nnMAUIMPortDipHalfStepThe step configuration for this port as indicated
by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.13 |
ol5208MTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.14 |
ol5208MTPModTableA list of module-specific information associated
with a particular 5208M-TP module in the concentrator. SEQUENCE OF Ol5208MTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.14.1 |
ol5208MTPModEntryA description of the 5208M-TP module attributes. Ol5208MTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.14.1.1 |
ol5208MTPModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.14.1.1.1 |
ol5208MTPModBypsAdminStateThe desired state of this module with respect
to the ring. Setting this attribute to bypass(2)
will cause this module to be removed from the ring
that passes through the module's ring in and ring out
ports.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.1.1.2 |
ol5208MTPModBypsOperStateThe operational state of this module with respect
to the ring. If this attribute is equal to bypass(2),
then the module has been removed from the ring that
passes through the module's ring in and ring out ports.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.1.1.3 |
ol5208MTPModDipCableImpThe setting of this module's port impedance matching, with
100 ohm corresponding to unshielded twisted pair cabling and
150 ohm corresponding to shielded twisted pair cabling.
This setting is valid for all ports on this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.1.1.4 |
ol5208MTPPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol5208MTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.14.2 |
ol5208MTPPortEntryA description of 5208M-TP port attributes. Ol5208MTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.14.2.1 |
ol5208MTPPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.14.2.1.1 |
ol5208MTPPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.14.2.1.2 |
ol5208MTPPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.2.1.3 |
ol5208MTPPortStationTypeDetermines whether the station connected to this port
has a MAC address.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.2.1.4 |
ol5208MTPTrunkTableA list of trunk-specific information about each trunk
for this module type. SEQUENCE OF Ol5208MTPTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.14.3 |
ol5208MTPTrunkEntryA description of 5208M-TP trunk attributes. Ol5208MTPTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1 |
ol5208MTPTrunkSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olTrunkSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.1 |
ol5208MTPTrunkIndexThe trunk number for this trunk.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.2 |
ol5208MTPTrunkDipAdminStateThe state of this trunk as indicated by the trunk's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.3 |
ol5208MTPTrunkCableMonThe cable monitor configuration for this trunk.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.4 |
ol5208MTPTrunkDipCableMonThe cable monitor configuration as indicated by this trunk's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.5 |
ol5208MTPTrunkNetMapStateThe map state of the copper ring-in trunk. This
should be set to external for ring-in trunks which
connect to external hubs. The mapping logic will not
operate on trunks which are set to external. This
prevents incorrect mapping which can occur when a
module in one hub detects the mapping signal from
another hub. This attribute only applies to copper
ring-in trunks.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.6 |
ol5208MTPTrunkExtBcnRecoveryIndicates whether the trunk is connected to a
segment that will perform beacon recovery. This
should be set to exists(1) for trunks which connect
to hubs which perform beacon recovery. This attribute
is used to determine the fault domain when resolving a
beaconing condition.
The beacon recovery process will resolve beaconing on
trunks with this attribute set to nonExists(2) before
trunks with the attribute set to exists(1) are resolved.
For backplane trunks, setting to a value other than
notApplicable will return invalidData error. The
default value is nonExists(2).rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.7 |
ol51nnMFP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.15 |
ol51nnMFPModTableA list of module-specific information associated
with a particular 51nnM-FP module in the concentrator. SEQUENCE OF Ol51nnMFPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.15.1 |
ol51nnMFPModEntryA list of module-specific information about a specific
51nnM-FP module in the concentrator. Ol51nnMFPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.15.1.1 |
ol51nnMFPModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.15.1.1.1 |
ol51nnMFPPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMFPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.15.2 |
ol51nnMFPPortEntryA list of module-specific information about a specific
51nnM-FP port in the concentrator. Ol51nnMFPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1 |
ol51nnMFPPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.1 |
ol51nnMFPPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.2 |
ol51nnMFPPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.3 |
ol51nnMFPPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.4 |
ol51nnMFPPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.5 |
ol51nnMFPPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.6 |
ol51nnMFPPortDipNetworkThe network indicated by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.7 |
ol51nnMFPPortLLWThe current low light warning configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.8 |
ol51nnMFPPortDipLLWThe low light warning configuration indicated by this module's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.9 |
ol51nnMFPPortHipwrThe current high power optic configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.10 |
ol51nnMFPPortDipHipwrThe high power optic configuration for this port as indicated
by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.11 |
ol51nnMFBP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.16 |
ol51nnMFBPModTableA list of module-specific information associated
with a particular 51nnM-FBP module in the concentrator. SEQUENCE OF Ol51nnMFBPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.16.1 |
ol51nnMFBPModEntryA list of module-specific information about a specific
51nnM-FBP module in the concentrator. Ol51nnMFBPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.16.1.1 |
ol51nnMFBPModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.16.1.1.1 |
ol51nnMFBPPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMFBPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.16.2 |
ol51nnMFBPPortEntryA list of module-specific information about a specific
51nnM-FBP port in the concentrator. Ol51nnMFBPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1 |
ol51nnMFBPPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.1 |
ol51nnMFBPPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.2 |
ol51nnMFBPPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.3 |
ol51nnMFBPPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.4 |
ol51nnMFBPPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.5 |
ol51nnMFBPPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.6 |
ol51nnMFBPPortDipNetworkThe network indicated by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.7 |
ol51nnMFBPPortLLWThe current low light warning configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.8 |
ol51nnMFBPPortDipLLWThe low light warning configuration indicated by this module's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.9 |
ol51nnMFBPPortHipwrThe current high power optic configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.10 |
ol51nnMFBPPortDipHipwrThe high power optic configuration for this port as indicated
by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.11 |
ol51nnMTPL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.17 |
ol51nnMTPLModTableA list of module-specific information associated
with a particular 51nnM-TPL module in the concentrator. SEQUENCE OF Ol51nnMTPLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.17.1 |
ol51nnMTPLModEntryA list of module-specific information about a specific
51nnM-TPL module in the concentrator. Ol51nnMTPLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.17.1.1 |
ol51nnMTPLModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.17.1.1.1 |
ol51nnMTPLModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.1.1.2 |
ol51nnMTPLPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMTPLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.17.2 |
ol51nnMTPLPortEntryA list of module-specific information about a specific
51nnM-TPL port in the concentrator. Ol51nnMTPLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1 |
ol51nnMTPLPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.1 |
ol51nnMTPLPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.2 |
ol51nnMTPLPortAdminStateThe desired state of this port. Setting this port to
be redundant or for remote diagnostics with invalid settings
of buddy slot and buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.3 |
ol51nnMTPLPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.
If the port is configured for remote diagnostics, then
this contains the slot index of the backup buddy port.
To configure a port for remote diagnostics, the buddy's
slot and port must be set to valid values.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.4 |
ol51nnMTPLPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.
If the port is configured for remote diagnostics, then
this contains the port index of the backup buddy port.
To configure a port for remote diagnostics, the buddy's
slot and port must be set to valid values.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.5 |
ol51nnMTPLPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.6 |
ol51nnMTPLPortLinkIntegThe current link integrity configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.7 |
ol51nnMTPLPortDipLinkIntegThe link integrity configuration as indicated by this
module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.8 |
ol51nnMTPLPortSquelchThe current squelch configuration for this port. See
the module's user's guide for more information.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.9 |
ol51nnMTPLPortJabberThe current receive jabber configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.10 |
ol51nnMTPLPortDipJabberThe receive jabber configuration as indicated by this
module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.11 |
ol51nnMTPPL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.18 |
ol51nnMTPPLModTableA list of module-specific information about a specific
51nnM-TPPL module in the concentrator. SEQUENCE OF Ol51nnMTPPLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.18.1 |
ol51nnMTPPLModEntryA list of module-specific information about a specific
51nnM-TPPL module in the concentrator. Ol51nnMTPPLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.18.1.1 |
ol51nnMTPPLModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.18.1.1.1 |
ol51nnMTPPLPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMTPPLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.18.2 |
ol51nnMTPPLPortEntryA list of module-specific information about a specific
51nnM-TPPL port in the concentrator. Ol51nnMTPPLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1 |
ol51nnMTPPLPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.1 |
ol51nnMTPPLPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.2 |
ol51nnMTPPLPortAdminStateThe desired state of this port. Setting this port to
be redundant or for remote diagnostics with invalid settings
of buddy slot and buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.3 |
ol51nnMTPPLPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.
If the port is configured for remote diagnostics, then
this contains the slot index of the backup buddy port.
To configure a port for remote diagnostics, the buddy's
slot and port must be set to valid values.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.4 |
ol51nnMTPPLPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.
If the port is configured for remote diagnostics, then
this contains the port index of the backup buddy port.
To configure a port for remote diagnostics, the buddy's
slot and port must be set to valid values.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.5 |
ol51nnMTPPLPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.6 |
ol51nnMTPPLPortDipNetworkThe network indicated by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.7 |
ol51nnMTPPLPortLinkIntegThe current link integrity configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.8 |
ol51nnMTPPLPortDipLinkIntegThe link integrity configuration as indicated by this
module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.9 |
ol51nnMTPPLPortSquelchThe current squelch configuration for this port. See
the module's user's guide for more information.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.10 |
ol51nnMTPPLPortJabberThe current receive jabber configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.11 |
ol51nnMTPPLPortDipJabberThe receive jabber configuration as indicated by this
module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.12 |
ol52nnMTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.19 |
ol52nnMTPModTableA list of module-specific information about a specific
52nnM-TP module in the concentrator. SEQUENCE OF Ol52nnMTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.19.1 |
ol52nnMTPModEntryA description of the 52nnM-TP module attributes. Ol52nnMTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.19.1.1 |
ol52nnMTPModSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olModSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.19.1.1.1 |
ol52nnMTPModRingSpeedThe ring's bandwidth.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.19.1.1.2 |
ol52nnMTPModDipRingSpeedThe dip switch setting for the ring's bandwidth.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.19.1.1.3 |
ol52nnMTPModCableImpThe setting of this module's port impedance matching, with
100 ohm corresponding to unshielded twisted pair cabling and
150 ohm corresponding to shielded twisted pair cabling.
This setting is valid for all ports on this module.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.19.1.1.4 |
ol52nnMTPModDipCableImpThe dip switch setting for the module's port impedance
matching.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.19.1.1.5 |
ol52nnMTPPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol52nnMTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.19.2 |
ol52nnMTPPortEntryA description of 52nnM-TP port attributes. Ol52nnMTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.19.2.1 |
ol52nnMTPPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.19.2.1.1 |
ol52nnMTPPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.19.2.1.2 |
ol52nnMTPPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.19.2.1.3 |
ol52nnMTPPortStationTypeDetermines whether the station connected to this port
has a MAC address.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.19.2.1.4 |
ol52nnMTPTrunkTableA list of trunk-specific information about each trunk
for this module type. SEQUENCE OF Ol52nnMTPTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.19.3 |
ol52nnMTPTrunkEntryA description of 52nnM-TP trunk attributes. Ol52nnMTPTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.19.3.1 |
ol52nnMTPTrunkSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olTrunkSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.19.3.1.1 |
ol52nnMTPTrunkIndexThe trunk number for this trunk.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.19.3.1.2 |
ol52nnMTPTrunkDipAdminStateThe state of this trunk as indicated by the trunk's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.19.3.1.3 |
ol52nnMFR OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.20 |
ol52nnMFRModTableA list of module-specific information about a specific
52nnM-FR module in the concentrator. SEQUENCE OF Ol52nnMFRModEntry .1.3.6.1.4.1.49.2.3.1.4.4.20.1 |
ol52nnMFRModEntryA description of the 52nnMFR module attributes. Ol52nnMFRModEntry .1.3.6.1.4.1.49.2.3.1.4.4.20.1.1 |
ol52nnMFRModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.20.1.1.1 |
ol52nnMFRModRingSpeedThe ring's bandwidth.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.1.1.2 |
ol52nnMFRModDipRingSpeedThe dip switch setting for the ring's bandwidth.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.1.1.3 |
ol52nnMFRPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol52nnMFRPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.20.2 |
ol52nnMFRPortEntryA description of 52nnMFR port attributes. Ol52nnMFRPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.20.2.1 |
ol52nnMFRPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.20.2.1.1 |
ol52nnMFRPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.20.2.1.2 |
ol52nnMFRPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.2.1.3 |
ol52nnMFRPortCableImpThe setting of this port's impedance matching, with 100 ohm
corresponding to unshielded twisted pair cabling and 150 ohm
corresponding to shielded twisted pair cabling.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.2.1.4 |
ol52nnMFRPortStationTypeDetermines whether the station connected to this port
has a MAC address.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.2.1.5 |
ol52nnMFRTrunkTableA list of trunk-specific information about each trunk
for this module type. SEQUENCE OF Ol52nnMFRTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.20.3 |
ol52nnMFRTrunkEntryA description of 52nnMFR trunk attributes. Ol52nnMFRTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1 |
ol52nnMFRTrunkSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olTrunkSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.1 |
ol52nnMFRTrunkIndexThe trunk number of this trunk.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.2 |
ol52nnMFRTrunkDipAdminStateThe state of this trunk as indicated by the trunk's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.3 |
ol52nnMFRTrunkCableMonThe cable monitor configuration for this trunk. This
does not apply to fiber trunks.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.4 |
ol52nnMFRTrunkDipCableMonThe cable monitor configuration as indicated by this trunk's
dip switches. This does not apply to fiber trunks.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.5 |
ol52nnMFRTrunkCompModeThe compatibility mode for this trunk. This
only applies to fiber trunks.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.6 |
ol52nnMFRTrunkDipCompModeThe compatibility mode as indicated by this trunk's
dip switches. This only applies to fiber trunks.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.7 |
ol52nnMFRTrunkNetMapStateThe map state of the copper ring-in trunk. This
should be set to external for ring-in trunks which
connect to external hubs. The mapping logic will not
operate on trunks which are set to external. This
prevents incorrect mapping which can occur when a
module in one hub detects the mapping signal from
another hub. This attribute only applies to copper
ring-in trunks.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.8 |
ol52nnMFRTrunkExtBcnRecoveryIndicates whether the trunk is connected to a
segment that will perform beacon recovery. This
should be set to exists(1) for trunks which connect
to hubs which perform beacon recovery. This attribute
is used to determine the fault domain when resolving a
beaconing condition.
The beacon recovery process will resolve beaconing on
trunks with this attribute set to nonExists(2) before
trunks with the attribute set to exists(1) are resolved.
For backplane trunks, setting to a value other than
notApplicable will return invalidData error. The
default value is nonExists(2).rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.9 |
ol51nnMTS OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.21 |
ol51nnMTSModTableA table of module-specific information for each
51nnM-TS module in the concentrator. SEQUENCE OF Ol51nnMTSModEntry .1.3.6.1.4.1.49.2.3.1.4.4.21.1 |
ol51nnMTSModEntryA list of module information for each 51nnMTS module
in the concentrator. Ol51nnMTSModEntry .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1 |
ol51nnMTSModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.1 |
ol51nnMTSModProtocolsA textual description of the protocols supported by
this modulero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.2 |
ol51nnMTSModIpAddressThe IP Address of the terminal terver.ro IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.3 |
ol51nnMTSModTCPPortThe TCP port number of the the terminal server's remote
console port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.4 |
ol51nnMTSModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the mac address of the terminal server.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.5 |
ol51nnMTSModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.6 |
ol51nnMTSModCPURevThe terminal server's CPU revision.ro DisplayString .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.7 |
ol51nnMTSPortTableA table of information that contains port-specific
information for each port on each 51nnMTS module. SEQUENCE OF Ol51nnMTSPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.21.2 |
ol51nnMTSPortEntryA list of information about a specific port on a
51nnMTS module. Ol51nnMTSPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.21.2.1 |
ol51nnMTSPortSlotIndexThe slot number for this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.21.2.1.1 |
ol51nnMTSPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.21.2.1.2 |
ol51nnMTSPortAdminStateThe administrative state of this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.21.2.1.3 |
ol51nnMTSPortOperStateThe operational mode of this port.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.21.2.1.4 |
ol51nnMFL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.22 |
ol51nnMFLModTableA table of module-specific information for each
51nnM-FL module in the concentrator. SEQUENCE OF Ol51nnMFLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.22.1 |
ol51nnMFLModEntryA list of module-specific information associated
with a particular 51nnM-FL module in the concentrator. Ol51nnMFLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.22.1.1 |
ol51nnMFLModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.22.1.1.1 |
ol51nnMFLModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.22.1.1.2 |
ol51nnMFLPortTableA table of port-specific information for each port
of each 51nnMFL module. SEQUENCE OF Ol51nnMFLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.22.2 |
ol51nnMFLPortEntryA list of information about a specific port on a
51nnMFL module. Ol51nnMFLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.22.2.1 |
ol51nnMFLPortSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olPortSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.1 |
ol51nnMFLPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.2 |
ol51nnMFLPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return invalidData error. Remote
Failure Signaling (RFS), is set on connected module
port to permit transmit error detection on local port.
Port must be set to be RFS when connected port is set to
be redundantrw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.3 |
ol51nnMFLPortBuddySlotThe slot index of the redundant port's buddy.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.4 |
ol51nnMFLPortBuddyPortThe port index of the redundant port's buddy.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.5 |
ol51nnMFLPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.6 |
ol50nnMRCTL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.23 |
ol50nnMRCTLModTableA table that contains information about each 50nnMRCTL
in the concentrator. SEQUENCE OF Ol50nnMRCTLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.23.1 |
ol50nnMRCTLModEntryA list of information for each 50nnMRCTL module
in the concentrator. Ol50nnMRCTLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.23.1.1 |
ol50nnMRCTLModSlotIndexThe slot number for this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.23.1.1.1 |
ol50nnMRCTLModOperStateThe operational state of the 50nnMRCTL module. Specifically,
this is an indicator of whether the 50nnMRCTL module is
providing clock signals to the backplane. An active 50nnMRCTL
module provides clock signals to the backplane while a standby
50nnMRCTL module does not. Note that only one 50nnMRCTL
module will be active at any given time; all other 50nnMRCTL
modules in the concentrator will be in standby mode.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.23.1.1.2 |
ol50nnMRCTLModClockStatusThe current status of the on-board clocks on this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.23.1.1.3 |
ol50nnMRCTLModTempStatusThe temperature as detected by the probe on this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.23.1.1.4 |
ol51nnMFB OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.24 |
ol51nnMFBModTableA list of module-specific information associated
with a particular 51nnM-FB module in the concentrator. SEQUENCE OF Ol51nnMFBModEntry .1.3.6.1.4.1.49.2.3.1.4.4.24.1 |
ol51nnMFBModEntryA list of module-specific information about a specific
51nnM-FB module in the concentrator. Ol51nnMFBModEntry .1.3.6.1.4.1.49.2.3.1.4.4.24.1.1 |
ol51nnMFBModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.24.1.1.1 |
ol51nnMFBModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.24.1.1.2 |
ol51nnMFBModLLWThe current state of this module's low light warning
configuration. Enabling this feature causes the module to
check for low light and to issue a warning if low light is
present. Disabling low light has the advantage of faster
redundancy switchover in the event of a port error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.24.1.1.3 |
ol51nnMFBModDipLLWThe low light warning configuration indicated by this module's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.24.1.1.4 |
ol51nnMFBPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMFBPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.24.2 |
ol51nnMFBPortEntryA list of module-specific information about a specific
51nnM-FB port in the concentrator. Ol51nnMFBPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.24.2.1 |
ol51nnMFBPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.1 |
ol51nnMFBPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.2 |
ol51nnMFBPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.3 |
ol51nnMFBPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.4 |
ol51nnMFBPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.5 |
ol51nnMFBPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.6 |
ol53nnMMGT OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.25 |
ol53nnMMGTModTableA list of module attributes that apply to this model.
To access an ol53nnMMGTModTable entry, the
ol53nnMMGTModSlotIndex attribute is used. SEQUENCE OF Ol53nnMMGTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.25.1 |
ol53nnMMGTModEntryA list of module-specific information about a specific
53nnM-MGT module in the concentrator. Ol53nnMMGTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1 |
ol53nnMMGTModSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of olModSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.1 |
ol53nnMMGTModMasterPriorityThe mastership priority of this agent. Ten is the
highest and one is the lowest. Priority is only
used when an election occurs. Mastership is not
preemptive unless the reset mastership command is used.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.2 |
ol53nnMMGTModMasterStatusThe mastership status of this agent.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.3 |
ol53nnMMGTModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the MAC address of port 1.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.4 |
ol53nnMMGTModIpAddressThe IP address associated with this module.rw IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.5 |
ol53nnMMGTModDownStreamMACDown stream MACro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.6 |
ol53nnMMGTModUpStreamMACUp stream MACro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.7 |
ol53nnMMGTModfddiMACPathThe FDDI path which should be inserted into the MACrw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.8 |
ol53nnMMGTModDownStreamModuleDown stream slot (transmit to)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.9 |
ol53nnMMGTModUpStreamModuleUp stream slot (receve from)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.10 |
ol53nnMMGTModDownStreamOperPathTransmit DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.11 |
ol53nnMMGTModUpStreamOperPathReceive DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.12 |
ol53nnMMGTModRingInfoAn array which is indexed by DBA number. Each element
contains the slot number (1..16) which is assigned to
transmit on this DBA. (debug only)ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.13 |
ol53nnMMGTPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol53nnMMGTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.25.2 |
ol53nnMMGTPortEntryA list of module-specific information about a specific
53nnM-MGT port in the concentrator. Ol53nnMMGTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1 |
ol53nnMMGTPortSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olPortSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.1 |
ol53nnMMGTPortIndexA unique value that identifies a particular port within this
module. Its value ranges between 1 and olModPortNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olPortIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.2 |
ol53nnMMGTPortConfigSpecifies the FDDI port type (a or b).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.3 |
ol53nnMMGTPortPcmState(refer to ANSI SMT 9.6.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.4 |
ol53nnMMGTPortConnectStateAn indication of the connect state of this PORT.
Basically, this gives a higher level view of the
state of the connection by grouping PCM states and
the PC-Withhold flag state. The supported values
and their corresponding PCM states and PC-Withhold
condition, when relevant, are:
disabled: (PC0:Off, PC9:Maint)
connecting: (PC1(Break) || PC3 (Connect) || PC4(next) ||
PC5 (Signal) || PC6(Join) || PC7 (Verify)) &&
(PC_Withhold = None)
standby: (PC_Withhold != None)
active: (PC2:Trace || PC8:Active)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.5 |
ol53nnMMGTPortNeighborThe type (PC_Neighbor) of the remote PORT that is
determined in PC_Signaling in R_Val (1,2) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.6 |
ol53nnMMGTPortRemoteMACIndicatedThe indication, in PC-Signaling that the remote
partner intends to place a MAC in the output token
PATH of this PORT. Signaled as R_Val (9) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.7 |
ol53nnMMGTPortBSFlagThe Break State, BS_Flag (refer to ANSI SMT
9.4.3.4).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.8 |
ol53nnMMGTPortPCWithholdPC_Withhold, (refer to ANSI SMT 9.4.1).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.9 |
ol53nnMMGTPortLerConditionThis variable is set to true whenever LerEstimate
is less than or equal to LerAlarm (the larger the number
the smaller the value).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.10 |
ol53nnMMGTTrunkTableFDDI module specific trunk table variables.
At present there are none. SEQUENCE OF Ol53nnMMGTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.25.3 |
ol53nnMMGTTrunkEntryA description of 53nnM-MGT trunk attributes. Ol53nnMMGTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.25.3.1 |
ol53nnMMGTTrunkSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olTrunkSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.25.3.1.1 |
ol53nnMMGTTrunkIndexA unique value that identifies a particular trunk within this
module. Its value ranges between 1 and olModTrunkNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olTrunkIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.25.3.1.2 |
ol53nnMFBMIC OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.26 |
ol53nnMFBMICModTableA list of module attributes that apply to this model.
To access an ol53nnMFBMICModTable entry, the
ol53nnMFBMICModSlotIndex attribute is used. SEQUENCE OF Ol53nnMFBMICModEntry .1.3.6.1.4.1.49.2.3.1.4.4.26.1 |
ol53nnMFBMICModEntryA list of module-specific information about a specific
53nnM-FBMIC module in the concentrator. Ol53nnMFBMICModEntry .1.3.6.1.4.1.49.2.3.1.4.4.26.1.1 |
ol53nnMFBMICModSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of olModSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.1 |
ol53nnMFBMICModDownStreamModuleDown stream slot (transmit to)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.2 |
ol53nnMFBMICModUpStreamModuleUp stream slot (receve from)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.3 |
ol53nnMFBMICModDownStreamOperPathTransmit DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.4 |
ol53nnMFBMICModUpStreamOperPathReceive DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.5 |
ol53nnMFBMICModRingInfoAn array which is indexed by DBA number. Each element
contains the slot number (1..16) which is assigned to
transmit on this DBA. (debug only)ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.6 |
ol53nnMFBMICPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol53nnMFBMICPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.26.2 |
ol53nnMFBMICPortEntryA list of module-specific information about a specific
53nnM-FBMIC port in the concentrator. Ol53nnMFBMICPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1 |
ol53nnMFBMICPortSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olPortSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.1 |
ol53nnMFBMICPortIndexA unique value that identifies a particular port within this
module. Its value ranges between 1 and olModPortNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olPortIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.2 |
ol53nnMFBMICPortConfigSpecifies the FDDI port type. If the port is on an
FPM, the only allowed values are slave(3), and master(4).
In addition, there can only be one active slave port on any
concentrator FDDI network.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.3 |
ol53nnMFBMICPortPcmState(refer to ANSI SMT 9.6.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.4 |
ol53nnMFBMICPortConnectStateAn indication of the connect state of this PORT.
Basically, this gives a higher level view of the
state of the connection by grouping PCM states and
the PC-Withhold flag state. The supported values
and their corresponding PCM states and PC-Withhold
condition, when relevant, are:
disabled: (PC0:Off, PC9:Maint)
connecting: (PC1(Break) || PC3 (Connect) || PC4(next) ||
PC5 (Signal) || PC6(Join) || PC7 (Verify)) &&
(PC_Withhold = None)
standby: (PC_Withhold != None)
active: (PC2:Trace || PC8:Active)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.5 |
ol53nnMFBMICPortNeighborThe type (PC_Neighbor) of the remote PORT that is
determined in PC_Signaling in R_Val (1,2) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.6 |
ol53nnMFBMICPortRemoteMACIndicatedThe indication, in PC-Signaling that the remote
partner intends to place a MAC in the output token
PATH of this PORT. Signaled as R_Val (9) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.7 |
ol53nnMFBMICPortBSFlagThe Break State, BS_Flag (refer to ANSI SMT
9.4.3.4).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.8 |
ol53nnMFBMICPortPCWithholdPC_Withhold, (refer to ANSI SMT 9.4.1).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.9 |
ol53nnMFBMICPortLerConditionThis variable is set to true whenever LerEstimate
is less than or equal to LerAlarm (the larger the number
the smaller the value).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.10 |
ol53nnMFBMICTrunkTableFDDI module specific trunk table variables.
At present there are none. SEQUENCE OF Ol53nnMFBMICTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.26.3 |
ol53nnMFBMICTrunkEntryA description of 53nnM-FBMIC trunk attributes. Ol53nnMFBMICTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.26.3.1 |
ol53nnMFBMICTrunkSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olTrunkSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.26.3.1.1 |
ol53nnMFBMICTrunkIndexA unique value that identifies a particular trunk within this
module. Its value ranges between 1 and olModTrunkNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olTrunkIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.26.3.1.2 |
ol53nnMFIBST OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.27 |
ol53nnMFIBSTModTableA list of module attributes that apply to this model.
To access an ol53nnMFIBSTModTable entry, the
ol53nnMFIBSTModSlotIndex attribute is used. SEQUENCE OF Ol53nnMFIBSTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.27.1 |
ol53nnMFIBSTModEntryA list of module-specific information about a specific
53nnM-FIBST module in the concentrator. Ol53nnMFIBSTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.27.1.1 |
ol53nnMFIBSTModSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of olModSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.1 |
ol53nnMFIBSTModDownStreamModuleDown stream slot (transmit to)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.2 |
ol53nnMFIBSTModUpStreamModuleUp stream slot (receve from)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.3 |
ol53nnMFIBSTModDownStreamOperPathTransmit DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.4 |
ol53nnMFIBSTModUpStreamOperPathReceive DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.5 |
ol53nnMFIBSTModRingInfoAn array which is indexed by DBA number. Each element
contains the slot number (1..16) which is assigned to
transmit on this DBA. (debug only)ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.6 |
ol53nnMFIBSTPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol53nnMFIBSTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.27.2 |
ol53nnMFIBSTPortEntryA list of module-specific information about a specific
53nnM-FIBST port in the concentrator. Ol53nnMFIBSTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1 |
ol53nnMFIBSTPortSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olPortSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.1 |
ol53nnMFIBSTPortIndexA unique value that identifies a particular port within this
module. Its value ranges between 1 and olModPortNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olPortIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.2 |
ol53nnMFIBSTPortConfigSpecifies the FDDI port type. If the port is on an
FPM, the only allowed values are slave(3) and master(4).
In addition, there can only be one active slave port on any
concentrator FDDI network.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.3 |
ol53nnMFIBSTPortPcmState(refer to ANSI SMT 9.6.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.4 |
ol53nnMFIBSTPortConnectStateAn indication of the connect state of this PORT.
Basically, this gives a higher level view of the
state of the connection by grouping PCM states and
the PC-Withhold flag state. The supported values
and their corresponding PCM states and PC-Withhold
condition, when relevant, are:
disabled: (PC0:Off, PC9:Maint)
connecting: (PC1(Break) || PC3 (Connect) || PC4(next) ||
PC5 (Signal) || PC6(Join) || PC7 (Verify)) &&
(PC_Withhold = None)
standby: (PC_Withhold != None)
active: (PC2:Trace || PC8:Active)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.5 |
ol53nnMFIBSTPortNeighborThe type (PC_Neighbor) of the remote PORT that is
determined in PC_Signaling in R_Val (1,2) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.6 |
ol53nnMFIBSTPortRemoteMACIndicatedThe indication, in PC-Signaling that the remote
partner intends to place a MAC in the output token
PATH of this PORT. Signaled as R_Val (9) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.7 |
ol53nnMFIBSTPortBSFlagThe Break State, BS_Flag (refer to ANSI SMT
9.4.3.4).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.8 |
ol53nnMFIBSTPortPCWithholdPC_Withhold, (refer to ANSI SMT 9.4.1).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.9 |
ol53nnMFIBSTPortLerConditionThis variable is set to true whenever LerEstimate
is less than or equal to LerAlarm (the larger the number
the smaller the value).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.10 |
ol53nnMFIBSTTrunkTableFDDI module specific trunk table variables.
At present there are none. SEQUENCE OF Ol53nnMFIBSTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.27.3 |
ol53nnMFIBSTTrunkEntryA description of 53nnM-FIBST trunk attributes. Ol53nnMFIBSTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.27.3.1 |
ol53nnMFIBSTTrunkSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olTrunkSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.27.3.1.1 |
ol53nnMFIBSTTrunkIndexA unique value that identifies a particular trunk within this
module. Its value ranges between 1 and olModTrunkNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olTrunkIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.27.3.1.2 |
ol53nnMSTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.28 |
ol53nnMSTPModTableA list of module attributes that apply to this model.
To access an ol53nnMSTPModTable entry, the
ol53nnMSTPModSlotIndex attribute is used. SEQUENCE OF Ol53nnMSTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.28.1 |
ol53nnMSTPModEntryA list of module-specific information about a specific
53nnM-FIBSTP module in the concentrator. Ol53nnMSTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.28.1.1 |
ol53nnMSTPModSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of olModSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.1 |
ol53nnMSTPModDownStreamModuleDown stream slot (transmit to)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.2 |
ol53nnMSTPModUpStreamModuleDown stream slot (receve from)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.3 |
ol53nnMSTPModDownStreamOperPathtransmit DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.4 |
ol53nnMSTPModUpStreamOperPathreceive DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.5 |
ol53nnMSTPModRingInfoAn array which is indexed by DBA number. Each element
contains the slot number (1..16) which is assigned to
transmit on this DBA. (debug only)ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.6 |
ol53nnMSTPPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol53nnMSTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.28.2 |
ol53nnMSTPPortEntryA list of module-specific information about a specific
53nnM-STP port in the concentrator. Ol53nnMSTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1 |
ol53nnMSTPPortSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olPortSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.1 |
ol53nnMSTPPortIndexA unique value that identifies a particular port within this
module. Its value ranges between 1 and olModPortNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olPortIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.2 |
ol53nnMSTPPortConfigSpecifies the FDDI port type. If the port is on an
FPM, the only allowed values are slave(3) and master(4).
In addition, there can only be one active slave port on any
concentrator FDDI network.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.3 |
ol53nnMSTPPortPcmState(refer to ANSI SMT 9.6.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.4 |
ol53nnMSTPPortConnectStateAn indication of the connect state of this PORT.
Basically, this gives a higher level view of the
state of the connection by grouping PCM states and
the PC-Withhold flag state. The supported values
and their corresponding PCM states and PC-Withhold
condition, when relevant, are:
disabled: (PC0:Off, PC9:Maint)
connecting: (PC1(Break) || PC3 (Connect) || PC4(next) ||
PC5 (Signal) || PC6(Join) || PC7 (Verify)) &&
(PC_Withhold = None)
standby: (PC_Withhold != None)
active: (PC2:Trace || PC8:Active)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.5 |
ol53nnMSTPPortNeighborThe type (PC_Neighbor) of the remote PORT that is
determined in PC_Signaling in R_Val (1,2) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.6 |
ol53nnMSTPPortRemoteMACIndicatedThe indication, in PC-Signaling that the remote
partner intends to place a MAC in the output token
PATH of this PORT. Signaled as R_Val (9) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.7 |
ol53nnMSTPPortBSFlagThe Break State, BS_Flag (refer to ANSI SMT
9.4.3.4).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.8 |
ol53nnMSTPPortPCWithholdPC_Withhold, (refer to ANSI SMT 9.4.1).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.9 |
ol53nnMSTPPortLerConditionThis variable is set to true whenever LerEstimate
is less than or equal to LerAlarm (the larger the number
the smaller the value).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.10 |
ol53nnMSTPPortPersonalitySpecifies the physical signaling used by the port, the only
valid values are sddi(3) and tpddi(4).rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.11 |
ol53nnMSTPTrunkTableFDDI module specific trunk table variables.
At present there are none. SEQUENCE OF Ol53nnMSTPTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.28.3 |
ol53nnMSTPTrunkEntryA description of 53nnM-STP trunk attributes. Ol53nnMSTPTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.28.3.1 |
ol53nnMSTPTrunkSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olTrunkSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.28.3.1.1 |
ol53nnMSTPTrunkIndexA unique value that identifies a particular trunk within this
module. Its value ranges between 1 and olModTrunkNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olTrunkIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.28.3.1.2 |
ol51nnMTPCL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.29 |
ol51nnMTPCLModTableA list of module-specific information about a specific
51nnM-TPCL module in the concentrator. SEQUENCE OF Ol51nnMTPCLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.29.1 |
ol51nnMTPCLModEntryA list of module-specific information about a specific
51nnM-TPCL module in the concentrator. Ol51nnMTPCLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1 |
ol51nnMTPCLModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.1 |
ol51nnMTPCLModMonitorConnWhen both connectors are on the same network:
Setting this object to connector-1 allows the EMM to
monitor the port statistics of port 1-12 on a per-port
basis, and the port statistics of port 13-24 are summed
and are reported through port 13.
Setting this object to connector-2 allows the EMM to
monitor the port statistics of port 12-24 on a per-port
basis, and the port statistics of port 1-12 are summed
and are reported through port 13.
Note: when the 2 connectors are on different networks,
setting this object to the value connector-1 or
connector-2 will not have any effect. The port counters
will be cleared whenever the value of this object is
changed.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.2 |
ol51nnMTPCLModConn1NetworkThe network that this connector is attached to.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.3 |
ol51nnMTPCLModConn2NetworkThe network that this connector is attached to.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.4 |
ol51nnMTPCLModConn1DipNetworkThe network indicated by the connector dip switch.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.5 |
ol51nnMTPCLModConn2DipNetworkThe network indicated by the connector dip switch.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.6 |
ol51nnMTPCLModAutoPartitionThis object holds the consecutive collision count
limit value. The module goes into the auto-partition
mode whenever the consecutive collision count exceeds
the consecutive collision limit count.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.7 |
ol51nnMTPCLPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMTPCLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.29.2 |
ol51nnMTPCLPortEntryA list of module-specific information about a specific
51nnM-TPCL port in the concentrator. Ol51nnMTPCLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1 |
ol51nnMTPCLPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.1 |
ol51nnMTPCLPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.2 |
ol51nnMTPCLPortAdminStateThe desired state of this port. Setting this port to
be redundant or for remote diagnostics with invalid settings
of buddy slot and buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.3 |
ol51nnMTPCLPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.
If the port is configured for remote diagnostics, then
this contains the slot index of the backup buddy port.
To configure a port for remote diagnostics, the buddy's
slot and port must be set to valid values.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.4 |
ol51nnMTPCLPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.
If the port is configured for remote diagnostics, then
this contains the port index of the backup buddy port.
To configure a port for remote diagnostics, the buddy's
slot and port must be set to valid values.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.5 |
ol51nnMTPCLPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.6 |
ol51nnMTPCLPortLinkIntegThe current link integrity configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.7 |
ol51nnMTPCLPortDipLinkIntegThe link integrity configuration as indicated by this
dip switch.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.8 |
ol52nnBTT OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.30 |
ol52nnBTTModTableA table of module-specific information for each
52nnB-TT module in the concentrator. SEQUENCE OF Ol52nnBTTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.30.1 |
ol52nnBTTModEntryA list of module-specific information about a specific
52nnB-TT module in the concentrator. Ol52nnBTTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.30.1.1 |
ol52nnBTTModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.30.1.1.1 |
ol52nnBTTModBridgeTypeWhether the bridge is a source-routing bridge or a
source-routing-transparent bridge.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.30.1.1.2 |
ol52nnBTTModSoftwareVersionThe version number of the software loaded into the
module's flash chips.ro DisplayString .1.3.6.1.4.1.49.2.3.1.4.4.30.1.1.3 |
ol52nnBTTModSRBridgeNoThe module's source routing bridge number.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.30.1.1.4 |
ol52nnBTTModNetworkStatusThe status of the ring containing this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.30.1.1.5 |
ol52nnBTTPortTableA table of port-specific for each port of each
52nnB-TT module i the concentrator. SEQUENCE OF Ol52nnBTTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.30.2 |
ol52nnBTTPortEntryA list of port-specific information about a specific
52nnB-TT port in the concentrator. Ol52nnBTTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1 |
ol52nnBTTPortSlotIndexThe slot number for this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.1 |
ol52nnBTTPortIndexThe port number for this port within this slot.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.2 |
ol52nnBTTPortConnectorThe port connector. Notice that setting port connector
available only for the front pannel port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.3 |
ol52nnBTTPortSTAPStateThe port connector. Notice that setting port connector
available only for the front pannel port.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.4 |
ol52nnBTTPortIpAddressThe IP address associated with this port.ro IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.5 |
ol52nnBTTPortMACAddressA 6 octet address that uniquely identifies this port.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.6 |
ol52nnBTTPortThroughputPort throughput measured in Kbytes per second.ro Gauge .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.7 |
ol52nnBTTPortForwardingPort forwarding rate measured in frames per second.ro Gauge .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.8 |
ol52nnBTTPortSRRingNoThe port's source routing ring number.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.9 |
ol52nnBTTPortRingSpeedThe ring's bandwidth.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.10 |
ol52nnBTTTrunkTableA table that contains trunk-specific information for
each trunk on each 52nnB-TT in the concentrator. SEQUENCE OF Ol52nnBTTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.30.3 |
ol52nnBTTTrunkEntryA list of information about a specific Trunk on a
52nnB-TT module in the concentrator. Ol52nnBTTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.30.3.1 |
ol52nnBTTTrunkSlotIndexThe slot number of this module. Its value ranges
between 1 and olConcNumSlots.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.30.3.1.1 |
ol52nnBTTTrunkIndexThe trunk number of this module. Its value ranges
between 1 and olModNumTrunks.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.30.3.1.2 |
ol51nnIx OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.31 |
ol51nnIxModTableA table of module-specific information for
each 51nnI-x module in the concentrator. SEQUENCE OF Ol51nnIxModEntry .1.3.6.1.4.1.49.2.3.1.4.4.31.1 |
ol51nnIxModEntryA list of module-specific information about a specific
51nnI-x module in the concentrator. Ol51nnIxModEntry .1.3.6.1.4.1.49.2.3.1.4.4.31.1.1 |
ol51nnIxModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.31.1.1.1 |
ol51nnIxModSwTypeThe software currently loaded and executing has the
module operating as a Bridge, Switch or Router.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.31.1.1.2 |
ol51nnIxModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the mac address of port 1.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.31.1.1.3 |
ol51nnIxModDipPromDefaultsThe current module configuration with respect to
default PROM values as specified by dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.31.1.1.4 |
ol51nnIxModProtocolsA textual description of the protocols supported by
this modulero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.49.2.3.1.4.4.31.1.1.5 |
ol51nnIxPortTableA table of port-specific information for each port of
each 51nnI-x module in the concentrator. SEQUENCE OF Ol51nnIxPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.31.2 |
ol51nnIxPortEntryA list of port-specific information about a specific
51nnI-x port in the concentrator. Ol51nnIxPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1 |
ol51nnIxPortSlotIndexThe slot number for this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.1 |
ol51nnIxPortIndexThe port number for this port within this slot.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.2 |
ol51nnIxPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.3 |
ol51nnIxPortSTAPStateThe current IEEE 802.1d Spanning Tree Algorithm and Protocol
state (STAP) of this port.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.4 |
ol51nnIxPortIpAddressThe IP Address associated with this port.ro IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.5 |
ol51nnIxPortDipNetworkThe network for this port as specified by this port's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.6 |
ol51nnIxPortDefNetworkThe network for this port as specified by the OEIM's
non-volatile storage.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.7 |
ol52nnMMGT OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.32 |
ol52nnMMGTModTableA table that contains module information about
each 52nnM-MGT in the concentrator. SEQUENCE OF Ol52nnMMGTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.32.1 |
ol52nnMMGTModEntryA list of module information for each 52nnM-MGT
in the concentrator. Ol52nnMMGTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.32.1.1 |
ol52nnMMGTModSlotIndexThe slot number of this module. Its value ranges
between 1 and olConcNumSlots.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.1 |
ol52nnMMGTModMasterPriorityThe mastership priority of this agent. Ten is the
highest and one is the lowest. Priority is only
used when an election occurs. Mastership is not
preemptive unless the reset mastership command is used.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.2 |
ol52nnMMGTModMasterStatusThe mastership status of this agent.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.3 |
ol52nnMMGTModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the MAC address of port 1.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.4 |
ol52nnMMGTModRingSpeedThe ring's bandwidth.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.5 |
ol52nnMMGTModNetworkStatusThe status of the ring containing this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.6 |
ol52nnMMGTPortTableA table that contains port-specific information for
each port on each 52nnM-MGT in the concentrator. SEQUENCE OF Ol52nnMMGTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.32.2 |
ol52nnMMGTPortEntryA list of information about a specific port on a
52nnM-MGT module in the concentrator. Ol52nnMMGTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.32.2.1 |
ol52nnMMGTPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.32.2.1.1 |
ol52nnMMGTPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.32.2.1.2 |
ol52nnMMGTPortIpAddressThe IP address associated with this port.rw IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.32.2.1.3 |
ol52nnMMGTTrunkTableA table that contains trunk-specific information for
each trunk on each 52nnM-MGT in the concentrator. SEQUENCE OF Ol52nnMMGTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.32.3 |
ol52nnMMGTTrunkEntryA list of information about a specific Trunk on a
52nnM-MGT module in the concentrator. Ol52nnMMGTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.32.3.1 |
ol52nnMMGTTrunkSlotIndexThe slot number of this module. Its value ranges
between 1 and olConcNumSlots.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.32.3.1.1 |
ol52nnMMGTTrunkIndexThe slot number of this module. Its value ranges
between 1 and olModNumTrunks.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.32.3.1.2 |
ol52nnMMGTTrunkCableMonThe cable monitor configuration for this trunk.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.32.3.1.3 |
ol52nnMMGTTrunkNetMapStateThe map state of the copper ring-in trunk. This
should be set to external for ring-in trunks which
connect to external hubs. The mapping logic will not
operate on trunks which are set to external. This
prevents incorrect mapping which can occur when a
module in one hub detects the mapping signal from
another hub. This attribute only applies to copper
ring-in trunks.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.32.3.1.4 |
ol52nnMMGTTrunkExtBcnRecoveryIndicates whether the trunk is connected to a
segment that will perform beacon recovery. This
should be set to exists(1) for trunks which connect
to hubs which perform beacon recovery. This attribute
is used to determine the fault domain when resolving a
beaconing condition.
The beacon recovery process will resolve beaconing on
trunks with this attribute set to nonExists(2) before
trunks with the attribute set to exists(1) are resolved.
For backplane trunks, setting to a value other than
notApplicable will return invalidData error. The
default value is nonExists(2).rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.32.3.1.5 |
ol50nnMHCTL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.33 |
ol50nnMHCTLModTableA table that contains information about each 50nnM-HCTL
in the concentrator. SEQUENCE OF Ol50nnMHCTLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.33.1 |
ol50nnMHCTLModEntryA list of information for each 50nnM-HCTL module
in the concentrator. Ol50nnMHCTLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1 |
ol50nnMHCTLModSlotIndexThe slot number for this module. The value should be 7.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.1 |
ol50nnMHCTLModOperStateThe operational state of the 50nnM-HCTL module. Specifically,
this is an indicator of whether the 50nnM-HCTL module is
providing clock signals to the backplane. An active 50nnM-HCTL
module provides clock signals to the backplane while a standby
50nnM-HCTL module does not. Note that only one 50nnM-HCTL
module will be active at any given time; all other 50nnM-HCTL/
50nnMRCTL modules in the concentrator will be in standby mode.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.2 |
ol50nnMHCTLModClockStatusThe current status of the on-board clocks on this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.3 |
ol50nnMHCTLModTempStatusThe temperature as detected by the probe on this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.4 |
ol50nnMHCTLModPDBStatusIndicates whether this 6-slot concentrator contains a power
distribution board that supports powersupply redundancy.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.5 |
ol50nnMHCTLModDipCh1ActColThe Ethernet channel 1 activity/collision LED configuration
as indicated by this module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.6 |
ol50nnMHCTLModDipCh2ActColThe Ethernet channel 2 activity/collision LED configuration
as indicated by this module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.7 |
ol50nnMHCTLModDipCh3ActColThe Ethernet channel 3 activity/collision LED configuration
as indicated by this module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.8 |
olNets OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5 |
olNet OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5.1 |
olEnet OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5.2 |
olTRnet OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5.3 |
olFDDInet OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5.4 |
olGroups OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.6 |
olAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.7 |
olThresh OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.7.1 |
olThreshControl OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.7.1.1 |
oebm OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.2 |
midnight OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.3 |
workGroupHub OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4 |
hubSysGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.1 |
hardwareGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.2 |
softwareGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.3 |
hubGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.4 |
boardGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.5 |
portGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.6 |
alarmGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.7 |
emm OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.5 |
chipBridge OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.6 |
trmm OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.7 |
fmm OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.8 |
focus1 OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.9 |
oeim OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.10 |
chipExperiment OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4 |
chipExpTokenRing OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4.1 |
dot5 OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4.1.1 |
dot1dBridge OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4.14 |
chipTTY OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.5 |
chipTFTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.6 |
chipDownload OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.7 |