CHIPDOT1D-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CHIPDOT1D-MIB.
127
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
127 total| Object Name |
|---|
chipcom OBJECT IDENTIFIER .1.3.6.1.4.1.49 |
RFC1155-SMI Unknown .1.3.6.1.4.1.49 |
chipmib02 OBJECT IDENTIFIER .1.3.6.1.4.1.49.2 |
chipGen OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.1 |
chipEcho OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.2 |
chipProducts OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3 |
online OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1 |
olAgents OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.1 |
olConc OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.2 |
olEnv OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.3 |
olModules OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4 |
olSpecMods OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4 |
ol50nnMCTL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.3 |
ol51nnMMGT OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.4 |
ol51nnMFIB OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.5 |
ol51nnMUTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.6 |
ol51nnMTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.7 |
ol51nnMBNC OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.8 |
ol51nnBEE OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.9 |
ol51nnRES OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.10 |
ol51nnREE OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.11 |
ol51nnMAUIF OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.12 |
ol51nnMAUIM OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.13 |
ol5208MTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.14 |
ol51nnMFP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.15 |
ol51nnMFBP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.16 |
ol51nnMTPL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.17 |
ol51nnMTPPL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.18 |
ol52nnMTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.19 |
ol52nnMFR OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.20 |
ol51nnMTS OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.21 |
ol51nnMFL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.22 |
ol50nnMRCTL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.23 |
ol51nnMFB OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.24 |
ol53nnMMGT OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.25 |
ol53nnMFBMIC OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.26 |
ol53nnMFIBST OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.27 |
ol53nnMSTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.28 |
ol51nnMTPCL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.29 |
ol52nnBTT OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.30 |
ol51nnIx OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.31 |
ol52nnMMGT OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.32 |
ol50nnMHCTL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.33 |
olNets OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5 |
olNet OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5.1 |
olEnet OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5.2 |
olTRnet OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5.3 |
olFDDInet OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5.4 |
olGroups OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.6 |
olAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.7 |
olThresh OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.7.1 |
olThreshControl OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.7.1.1 |
oebm OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.2 |
midnight OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.3 |
workGroupHub OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4 |
hubSysGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.1 |
hardwareGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.2 |
softwareGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.3 |
hubGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.4 |
boardGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.5 |
portGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.6 |
alarmGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.7 |
emm OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.5 |
chipBridge OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.6 |
chipBridgeSideSwitchModeThe state of the side switch feature.ro Enumeration .1.3.6.1.4.1.49.2.3.6.1 |
trmm OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.7 |
fmm OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.8 |
focus1 OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.9 |
oeim OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.10 |
chipExperiment OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4 |
chipExpTokenRing OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4.1 |
dot5 OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4.1.1 |
dot1dBridge OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4.14 |
newRootThe newRoot trap indicates that the sending agent
has become the new root of the Spanning Tree; the
trap is sent by a bridge soon after its election
as the new root, e.g., upon expiration of the
Topology Change Timer immediately subsequent to
its election. TRAP-TYPE .1.3.6.1.4.1.49.2.4.14.0.1 |
topologyChangeA topologyChange trap is sent by a bridge when
any of its configured ports transitions from the
Learning state to the Forwarding state, or from
the Forwarding state to the Blocking state. The
trap is not sent if a newRoot trap is sent for the
same transition. TRAP-TYPE .1.3.6.1.4.1.49.2.4.14.0.2 |
dot1dBase OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4.14.1 |
dot1dBaseBridgeAddressThe MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with dot1dStpPriority a unique
BridgeIdentifier is formed which is used in the
Spanning Tree Protocol.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.49.2.4.14.1.1 |
dot1dBaseNumPortsThe number of ports controlled by this bridging
entity.ro INTEGER .1.3.6.1.4.1.49.2.4.14.1.2 |
dot1dBaseTypeIndicates what type of bridging this bridge can
perform. If a bridge is actually performing a
certain type of bridging this will be indicated by
entries in the port table for the given type.ro Enumeration .1.3.6.1.4.1.49.2.4.14.1.3 |
dot1dBasePortTableA table that contains generic information about
every port that is associated with this bridge.
Transparent, source-route, and srt ports are
included. SEQUENCE OF Dot1dBasePortEntry .1.3.6.1.4.1.49.2.4.14.1.4 |
dot1dBasePortEntryA list of information for each port of the
bridge. Dot1dBasePortEntry .1.3.6.1.4.1.49.2.4.14.1.4.1 |
dot1dBasePortThe port number of the port for which this entry
contains bridge management information.ro INTEGER .1.3.6.1.4.1.49.2.4.14.1.4.1.1 |
dot1dBasePortIfIndexThe value of the instance of the ifIndex object,
defined in [4,6], for the interface corresponding
to this port.ro INTEGER .1.3.6.1.4.1.49.2.4.14.1.4.1.2 |
dot1dBasePortCircuitFor a port which (potentially) has the same value
of dot1dBasePortIfIndex as another port on the
same bridge, this object contains the name of an
object instance unique to this port. For example,
in the case where multiple ports correspond one-
to-one with multiple X.25 virtual circuits, this
value might identify an (e.g., the first) object
instance associated with the X.25 virtual circuit
corresponding to this port.
For a port which has a unique value of
dot1dBasePortIfIndex, this object can have the
value { 0 0 }.ro OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4.14.1.4.1.3 |
dot1dBasePortDelayExceededDiscardsThe number of frames discarded by this port due
to excessive transit delay through the bridge. It
is incremented by both transparent and source
route bridges.ro Counter .1.3.6.1.4.1.49.2.4.14.1.4.1.4 |
dot1dBasePortMtuExceededDiscardsThe number of frames discarded by this port due
to an excessive size. It is incremented by both
transparent and source route bridges.ro Counter .1.3.6.1.4.1.49.2.4.14.1.4.1.5 |
dot1dStp OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4.14.2 |
dot1dStpProtocolSpecificationAn indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
future versions of the IEEE Spanning Tree Protocol
are released that are incompatible with the
current version a new value will be defined.ro Enumeration .1.3.6.1.4.1.49.2.4.14.2.1 |
dot1dStpPriorityThe value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
dot1dBaseBridgeAddress.rw INTEGER .1.3.6.1.4.1.49.2.4.14.2.2 |
dot1dStpTimeSinceTopologyChangeThe time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.49.2.4.14.2.3 |
dot1dStpTopChangesThe total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.ro Counter .1.3.6.1.4.1.49.2.4.14.2.4 |
dot1dStpDesignatedRootThe bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId .1.3.6.1.4.1.49.2.4.14.2.5 |
dot1dStpRootCostThe cost of the path to the root as seen from
this bridge.ro INTEGER .1.3.6.1.4.1.49.2.4.14.2.6 |
dot1dStpRootPortThe port number of the port which offers the
lowest cost path from this bridge to the root
bridge.ro INTEGER .1.3.6.1.4.1.49.2.4.14.2.7 |
dot1dStpMaxAgeThe maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.ro Timeout .1.3.6.1.4.1.49.2.4.14.2.8 |
dot1dStpHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.ro Timeout .1.3.6.1.4.1.49.2.4.14.2.9 |
dot1dStpHoldTimeThis time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.ro INTEGER .1.3.6.1.4.1.49.2.4.14.2.10 |
dot1dStpForwardDelayThis time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in a particular state before moving to the
next state. For example, how long a port stays in
the Listening state when moving from Blocking to
Learning. This value is also used, when a
topology change has been detected and is underway,
to age all dynamic entries in the Forwarding
Database. [Note that this value is the one that
this bridge is currently using, in contrast to
dot1dStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]ro Timeout .1.3.6.1.4.1.49.2.4.14.2.11 |
dot1dStpBridgeMaxAgeThe value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1d/D9 specifies that the range for this
parameter is related to the value of
dot1dStpBridgeHelloTime. The granularity of this
timer is specified by 802.1d/D9 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.49.2.4.14.2.12 |
dot1dStpBridgeHelloTimeThe value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by
802.1d/D9 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds.rw Timeout .1.3.6.1.4.1.49.2.4.14.2.13 |
dot1dStpBridgeForwardDelayThe value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1d/D9 specifies that the range for this
parameter is related to the value of
dot1dStpBridgeMaxAge. The granularity of this
timer is specified by 802.1d/D9 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.49.2.4.14.2.14 |
dot1dStpPortTableA table that contains port-specific information
for the Spanning Tree Protocol. SEQUENCE OF Dot1dStpPortEntry .1.3.6.1.4.1.49.2.4.14.2.15 |
dot1dStpPortEntryA list of information maintained by every port
about the Spanning Tree Protocol state for that
port. Dot1dStpPortEntry .1.3.6.1.4.1.49.2.4.14.2.15.1 |
dot1dStpPortThe port number of the port for which this entry
contains Spanning Tree Protocol management
information.ro INTEGER .1.3.6.1.4.1.49.2.4.14.2.15.1.1 |
dot1dStpPortPriorityThe value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
dot1dStpPort.rw INTEGER .1.3.6.1.4.1.49.2.4.14.2.15.1.2 |
dot1dStpPortStateThe port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see dot1dStpPortEnable), this object
will have a value of disabled(1).ro Enumeration .1.3.6.1.4.1.49.2.4.14.2.15.1.3 |
dot1dStpPortEnableThe enabled/disabled status of the port.rw Enumeration .1.3.6.1.4.1.49.2.4.14.2.15.1.4 |
dot1dStpPortPathCostThe contribution of this port to the path cost of
paths towards the spanning tree root which include
this port.rw INTEGER .1.3.6.1.4.1.49.2.4.14.2.15.1.5 |
dot1dStpPortDesignatedRootThe unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.ro BridgeId .1.3.6.1.4.1.49.2.4.14.2.15.1.6 |
dot1dStpPortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.ro INTEGER .1.3.6.1.4.1.49.2.4.14.2.15.1.7 |
dot1dStpPortDesignatedBridgeThe Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.ro BridgeId .1.3.6.1.4.1.49.2.4.14.2.15.1.8 |
dot1dStpPortDesignatedPortThe Port Identifier of the port on the Designated
Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.49.2.4.14.2.15.1.9 |
dot1dStpPortForwardTransitionsThe number of times this port has transitioned
from the Learning state to the Forwarding state.ro Counter .1.3.6.1.4.1.49.2.4.14.2.15.1.10 |
dot1dTp OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4.14.4 |
dot1dTpLearnedEntryDiscardsThe total number of Forwarding Database entries,
which have been or would have been learnt, but
have been discarded due to a lack of space to
store them in the Forwarding Database. If this
counter is increasing, it indicates that the
Forwarding Database is regularly becoming full (a
condition which has unpleasant performance effects
on the subnetwork). If this counter has a
significant value but is not presently increasing,
it indicates that the problem has been occurring
but is not persistent.ro Counter .1.3.6.1.4.1.49.2.4.14.4.1 |
dot1dTpAgingTimeThe timeout period in seconds for aging out
dynamically learned forwarding information.rw INTEGER .1.3.6.1.4.1.49.2.4.14.4.2 |
dot1dTpPortTableA table that contains information about every
port that is associated with this transparent
bridge. SEQUENCE OF Dot1dTpPortEntry .1.3.6.1.4.1.49.2.4.14.4.4 |
dot1dTpPortEntryA list of information for each port of a
transparent bridge. Dot1dTpPortEntry .1.3.6.1.4.1.49.2.4.14.4.4.1 |
dot1dTpPortThe port number of the port for which this entry
contains Transparent bridging management
information.ro INTEGER .1.3.6.1.4.1.49.2.4.14.4.4.1.1 |
dot1dTpPortMaxInfoThe maximum size of the INFO (non-MAC) field that
this port will receive or transmit.ro INTEGER .1.3.6.1.4.1.49.2.4.14.4.4.1.2 |
dot1dTpPortInFramesThe number of frames that have been received by
this port from its segment. Note that a frame
received on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function.ro Counter .1.3.6.1.4.1.49.2.4.14.4.4.1.3 |
dot1dTpPortOutFramesThe number of frames that have been transmitted
by this port to its segment. Note that a frame
transmitted on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function.ro Counter .1.3.6.1.4.1.49.2.4.14.4.4.1.4 |
dot1dTpPortInDiscardsCount of valid frames received which were
discarded (i.e., filtered) by the Forwarding
Process.ro Counter .1.3.6.1.4.1.49.2.4.14.4.4.1.5 |
dot1dStatic OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4.14.5 |
chipTTY OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.5 |
chipTFTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.6 |
chipDownload OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.7 |