CHIPCOM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for CHIPCOM-MIB.
965
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
965 total| Object Name |
|---|
chipcom OBJECT IDENTIFIER .1.3.6.1.4.1.49 |
RFC1155-SMI Unknown .1.3.6.1.4.1.49 |
chipHelloA chipHello trap is sent every minute by an agent with
the hello trap enabled. The hello trap will discontinue
being sent when either the agent receives an authenticate
SNMP request, or after 255 minutes. TRAP-TYPE .1.3.6.1.4.1.49.0.1 |
chipSlotDownThis trap indicates that the module in the indicated
slot is down. Usually, this trap is sent when the module
has been removed.
Sometimes, this trap is sent when management communications
with this module have been broken. In this case, it may not
be possible to distinguish between a removed and a failed
module. The module type (olModType) and the module
description (olModDescr) are also provided in this case. TRAP-TYPE .1.3.6.1.4.1.49.0.2 |
chipSlotUpThis trap indicates that a blade in the indicated slot
is up. Usually, this trap is sent when the module is
inserted into the hub.
Sometimes, this trap is sent when management communications
have been restored to a module where they had previously
been broken. In this case, it may not be possible to
distinguish between a module that has just be inserted
and a module that has just the. The module type (olModType)
and the module description (olModDescr) are also provided
in this case. TRAP-TYPE .1.3.6.1.4.1.49.0.3 |
chipEnvironmentA chipEnvironment trap indicates a change in the
concentrator's environment has occurred. The variables
supplied indicate what exactly changed. TRAP-TYPE .1.3.6.1.4.1.49.0.4 |
chipHardwareA chipHardware trap indicates that a soft hardware
failure has been detected. An example of a soft
hardware failure is too many writes to non-vatile
storage. This is an indication to get the unit serviced. TRAP-TYPE .1.3.6.1.4.1.49.0.5 |
chipSoftwareA chipSoftware trap indicates that a soft software
failure has been detected. This is an indication
to get the unit serviced. TRAP-TYPE .1.3.6.1.4.1.49.0.6 |
chipChangeA chipChange trap is used to indicate that a configuration
change has occurred. The actual variables that changed
are included in the variables section of the PDU. TRAP-TYPE .1.3.6.1.4.1.49.0.7 |
chipFatalA chipFatal trap is used to indicate that a fatal
error has occurred. This is an indication to get
the unit serviced. TRAP-TYPE .1.3.6.1.4.1.49.0.8 |
chipTrunkDownA chipTrunkDown trap indicates that trunk's status
has changed to an error condition. Multiple chipTrunkDown
traps may be sent if the trunk's status changes from
one error to another. TRAP-TYPE .1.3.6.1.4.1.49.0.9 |
chipTrunkUpA chipTrunkUp trap indicates that a trunk's status
has changed to a non-error (okay or warning) condition. TRAP-TYPE .1.3.6.1.4.1.49.0.10 |
chipPortDownA chipPortDown trap indicates that a port's status
has changed to an error condition. Multiple chipPortDown
traps may be sent if the port's status changes from
one error to another. TRAP-TYPE .1.3.6.1.4.1.49.0.11 |
chipPortUpA chipPortUp trap indicates that a port's status
has changed to a non-error (okay or warning) condition. TRAP-TYPE .1.3.6.1.4.1.49.0.12 |
chipPingA chipPing trap is sent after the SNMP initiated PING
command is completed. After the last echo request packet
is sent, this trap is sent indicating the ping address,
the number of requests sent, and the number of responses
received at the time the trap was generated. TRAP-TYPE .1.3.6.1.4.1.49.0.13 |
chipAboveThreshdA chipAboveThreshd trap indicates that a Counter or
Gauge variable has exceeded its threshd. The variable
which is above its threshd is the only variable in
the varBind list. Its value is taken at the time the
threshd calculation is performed and therefore may be
greater than the actual threshd value. Another above
threshd trap will not be sent until a below
threshd trap is sent. TRAP-TYPE .1.3.6.1.4.1.49.0.14 |
chipBelowThreshdA chipBelowThreshd trap indicates that a Counter or
Gauge variable had exceeded its threshd but is now
below its threshd. The variable which is below its
threshd is the only variable in the varBind list.
Its value is taken at the time the threshd calculation
is performed and therefore may be less than the
actual threshd value. Another below threshd trap
will not be sent until an above threshd trap is sent. TRAP-TYPE .1.3.6.1.4.1.49.0.15 |
chipmib02 OBJECT IDENTIFIER .1.3.6.1.4.1.49.2 |
chipGen OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.1 |
chipGenProductThe product type represented by this agent.ro Enumeration .1.3.6.1.4.1.49.2.1.1 |
chipGenServiceDateThe date that the product was last serviced in the
format yymmdd. If this date is unknown, the value of this
object is '000000'.ro DisplayString .1.3.6.1.4.1.49.2.1.2 |
chipGenNetmanThe IP (source) Address of the last authenticated SNMP PDU
received by this entity before this request. An IP Address
of 00.00.00.00 represents the default value.ro IpAddress .1.3.6.1.4.1.49.2.1.3 |
chipGenDiagnosticsThe result of this product's diagnostic test(s). If
any test fails, this will have the failed(2) value.
Note, many products do not operate after a diagnostic
failure. In this case, no SNMP communication would
be available.ro Enumeration .1.3.6.1.4.1.49.2.1.4 |
chipGenSerialThe serial number of this product.ro DisplayString .1.3.6.1.4.1.49.2.1.5 |
chipGenIDA unique ID used for grouping disparate agents together.
For example, a concentrator may contain multiple agents.
This ID is could be assigned by the management station
to identify all of these agents as being contained in the
same concentrator.rw INTEGER .1.3.6.1.4.1.49.2.1.6 |
chipGenVersThe version identifier(s) for this agent.ro DisplayString .1.3.6.1.4.1.49.2.1.7 |
chipGenAuthFailureAddrThe source IP Address of the last SNMP request that caused
an authentication failure trap to be generated. This
object is also included in the SNMP authenticationFailure
trap.ro IpAddress .1.3.6.1.4.1.49.2.1.8 |
chipGenTimeLastChangedA snapshot of sysUpTime when the last trap was generated.
This attribute can be used to save polling by a management
station. If there have been no traps generated since the last
poll, there is no need for the station to poll again.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.49.2.1.9 |
chipEcho OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.2 |
chipEchoStartSetting chipEchoStart to startEcho(2) causes the device
to begin an ICMP echo sequence using the parameters
indicated by the rest of the chipEcho group.rw Enumeration .1.3.6.1.4.1.49.2.2.1 |
chipEchoAddrThe IP Address to which the device will ping. The default
value is the loopback address 127.0.0.1 .rw IpAddress .1.3.6.1.4.1.49.2.2.2 |
chipEchoPatternThe actual pattern to be contained in the ICMP echo packet.rw Enumeration .1.3.6.1.4.1.49.2.2.3 |
chipEchoNumberThe number of ICMP echo packets (pings) to send.rw INTEGER .1.3.6.1.4.1.49.2.2.4 |
chipEchoSizeThe size of the ICMP echo packet (ping) to send when
chipEchoStart is set. The valid range is between 64 and
1500 octets.rw INTEGER .1.3.6.1.4.1.49.2.2.5 |
chipEchoResponseCountsThe count of ICMP echo response packets received since
the last PING was initiated.ro Counter .1.3.6.1.4.1.49.2.2.6 |
chipProducts OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3 |
online OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1 |
olAgents OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.1 |
olAgentsMySlotThe slot id of this agent.ro INTEGER .1.3.6.1.4.1.49.2.3.1.1.1 |
olAgentsMasterResetResetting mastership causes a new mastership election to
occur. The agent with the highest mastership priority will
become the new master. If there is more than one agent
with the highest priority, the selection between
those agents will be arbritrary.rw Enumeration .1.3.6.1.4.1.49.2.3.1.1.2 |
olAgentsTableA table of agents in the concentrator as seen by
this agent. A master will see all the agents; a slave
will only see itself. SEQUENCE OF OlAgentsEntry .1.3.6.1.4.1.49.2.3.1.1.3 |
olAgentsEntryA profile of an agent within the concentrator. OlAgentsEntry .1.3.6.1.4.1.49.2.3.1.1.3.1 |
olAgentsSlotIndexThe slot number that identifies the referenced agent.ro INTEGER .1.3.6.1.4.1.49.2.3.1.1.3.1.1 |
olAgentsStationAddrThe unique identifier for this agent. Often this
is the value of ifPhysAddress for the first interface.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.1.3.1.2 |
olAgentsIpAddressAn IP Address that can be used to communicate to
this agent. Note, this object's value may change
as the agent switches to different sub-networks.ro IpAddress .1.3.6.1.4.1.49.2.3.1.1.3.1.3 |
olAgentsMasterStatusThe mastership status of this agent.ro Enumeration .1.3.6.1.4.1.49.2.3.1.1.3.1.4 |
olAgentsMasterPriorityThe mastership priority of this agent. Ten is the
highest and one is the lowest. Never means will not
be able become master. Some agents do not have the
capability to become master (the etherent to ethernet bridge,
e.g.) and setting those agents to a value other than
never(11) will generate an invalid value error. Priority is
only used when an election occurs. Mastership is not
pre-emptive; use the reset mastership command
(olAgentsMasterReset).rw Enumeration .1.3.6.1.4.1.49.2.3.1.1.3.1.5 |
olConc OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.2 |
olConcTypeThis object identifies the type of concentrator represented
by this agent.ro Enumeration .1.3.6.1.4.1.49.2.3.1.2.1 |
olConcResetSetting this value to reset(2) causes this concentrator to
reset.rw Enumeration .1.3.6.1.4.1.49.2.3.1.2.2 |
olConcNumSlotsThe number of slots in this concentrator. Note, that
if a hidden controller is present, the number of slots
is one more than the number of payload slots (six-slot-hc
will report 7 slots, for example). The hidden controller
does not actually occupy a main slot in the 6-slot
concentrator, but it will report itself as slot 7.ro INTEGER .1.3.6.1.4.1.49.2.3.1.2.3 |
olConcProfileA bit string where the least significant bit corresponds to
slot 1. A '1' in the bit indicates that a module is present
in that slot. The number of octets provided is based on
the olConcNumSlots value divided by 8. Any extra bits
(for example, bits 18-24 for 17 slots) are meaningless.
For example, the string 0x01 0xFF 0xFF would represent
a full 17 slot concentrator.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.2.4 |
olEnv OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.3 |
olEnvTempStatusThe overall temperature status for this concentrator.
This object's value is an aggregate of all the temperature
probes in the concentrator, such that, when at least one probe
reports extreme temperature, this object will have the value
extremeTemp(2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.3.1 |
olEnvPSCapacityThe total capacity of power supplies for this concentrator.ro INTEGER .1.3.6.1.4.1.49.2.3.1.3.2 |
olEnvPSTableA table that contains information about each potential
power supply in the concentrator. SEQUENCE OF OlEnvPSEntry .1.3.6.1.4.1.49.2.3.1.3.3 |
olEnvPSEntryA list of of information for each power supply in the
concentrator. OlEnvPSEntry .1.3.6.1.4.1.49.2.3.1.3.3.1 |
olEnvPSIndexIdentifies the power supply for which this entry contains
power supply information. For systems with the
primary and backup power supply (as opposed to
the N+1 design), index 1 refers to the primary,
and index 2 refers to the backup.ro INTEGER .1.3.6.1.4.1.49.2.3.1.3.3.1.1 |
olEnvPSAdminStateThe current desired state of the power supply. A power
supply in standby does not provide power to the concentrator.rw Enumeration .1.3.6.1.4.1.49.2.3.1.3.3.1.2 |
olEnvPSOperStatusThe current operational state of the power supply. A power
supply in standby does not provide power to the concentrator.ro Enumeration .1.3.6.1.4.1.49.2.3.1.3.3.1.3 |
olEnvFanStatusThe overall status of the fan(s).ro Enumeration .1.3.6.1.4.1.49.2.3.1.3.4 |
olModules OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4 |
olModTableA table that contains generic information about every
module that is present within the concentrator. SEQUENCE OF OlModEntry .1.3.6.1.4.1.49.2.3.1.4.1 |
olModEntryA list of information for each module in the concentrator. OlModEntry .1.3.6.1.4.1.49.2.3.1.4.1.1 |
olModSlotIndexThe unique slot number of this module. Its value ranges
between 1 and olConcNumSlots and remains constant at
least from one re-initialization of the entity's network
management system to the next re-initialization.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.1.1.1 |
olModTypeThe unique type identifier for this module. This type
is used to identify the branch in olSpecMods (see below).
module-unmanageable(1) means that only the following
objects are valid for this module:
olModSlotIndex
olModClass
olModVersion
olModVendor
olModReset
olModConfigToDips
olModConfigured
module-unknown(2) means that all the generic attributes
are manageable, but there is no olSpecMods branch
for this module as viewed by this agent.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.1.1.2 |
olModClassThe class of this module. Generally speaking, this
object indicates the kind of module. Specifically,
the class identifier specifies the internal representation
of the module's managed information base.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.1.1.3 |
olModDescrA textual string containing information about the module.ro DisplayString .1.3.6.1.4.1.49.2.3.1.4.1.1.4 |
olModVersionThe software version number of this module.ro DisplayString .1.3.6.1.4.1.49.2.3.1.4.1.1.5 |
olModVendorThe actual manufacturer of this board.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.1.1.6 |
olModResetModuleSetting this object to reset(2) causes this module to reset.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.1.1.7 |
olModConfigToDipsSetting this object to configure(2) causes this module to
configure based on the dip switch settings.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.1.1.8 |
olModConfiguredThis object indicates whether this module has already been
configured. An unconfigured module is configured to a safe
state where the network is isolated and the ports are
disabled.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.1.1.9 |
olModNetworkThe network that this module is attached to. If the
value is other(1) or port-switching(3), setting this object
to a different value will generate the invalidData error.
If the value is port-switching(3), manage the networks via
the olPortNetwork object.
The value per-connector(20) is returned if the managed
module is a per-connector switchable and the connectors are on
different networks. The connector networks are managed
by the objects defined in the olSpecMods branch
specified for this module.
Modules and ports on the same network intercommunicate.
Setting the module to isolated(2) (or other isolated values),
removes this module from the backplane.
Setting this module to a value that is not the same
protocol type will return an invalidData error.
Setting this module to a value that it does not support
will return an invalidData error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.1.1.10 |
olModNetworkTypeThe network type of this module. port-switching(3)
means that the network type differs depending on the
port (like the router module). The network type reflects
the valid values for olModNetwork.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.1.1.11 |
olModStatusThe module's status.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.1.1.12 |
olModNumPortsThe number of ports on this module. Note, ports may be
physical ports like 10BASE-T ports, or logical, like
the bridge module ports.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.1.1.13 |
olModNumTrunksThe number of trunks on this module. Note, trunks
are links that are, by definition, backbone connections.
Examples of trunks are ring in and ring out ports for
token ring, and the connections for rings to the backplane.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.1.1.14 |
olPortTableA table that contains generic information about
each port on each module present within the concentrator. SEQUENCE OF OlPortEntry .1.3.6.1.4.1.49.2.3.1.4.2 |
olPortEntryA list of information about each port in the
concentrator. OlPortEntry .1.3.6.1.4.1.49.2.3.1.4.2.1 |
olPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.2.1.1 |
olPortIndexThe port number of this port within this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.2.1.2 |
olPortTypeThe type of port. logical(1) is used to manage
port resources that may not map directly to physical
connections. The OEBM, for example, has two logical
ports, although those two ports can be assigned to
different combinations of four physical connections.
media(2) refers to ports such as those on the 10BASE-T
module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.2.1.3 |
olPortConnectorThe connector type of this port.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.2.1.4 |
olPortStatusThe status of this port.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.2.1.5 |
olPortAdminStateThe desired state of this port. Setting a port to be
redundant-primary(3) or redundant-backup requires that the
buddy slot and buddy port also be set to valid values
(see appropriate olSpecMods objects). If the
values associated with the redundant buddys
are not valid, a genError will be returned. If the port
is already redundant, an invalid set may result in both
ports being disabled.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.2.1.6 |
olPortNetworkThe network that this port is attached to.
If the value of olPortNetwork is per-module(4),
then use the olModNetwork to manage this port.
Setting olPortNetwork to a different value in this
case will generate the invalidData error.
Setting this port to a value that is not the same protocol
type will return invalidData error. front-panel(5) is used for
modules that have a logical port and a physical front
connection. An example of this is the Eth2Eth Bridge module.
Setting this port to a value that it does not support will
generate an invalidData error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.2.1.7 |
olPortNetworkTypeThe network type of this port. The type reflects the
valid values for olPortNetwork.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.2.1.8 |
olTrunkTableA table that contains generic information about
each trunk on each module present within the concentrator. SEQUENCE OF OlTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.3 |
olTrunkEntryA list of information about each trunk in the
concentrator. OlTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.3.1 |
olTrunkSlotIndexThe slot number of this trunk's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.3.1.1 |
olTrunkIndexThe trunk number of this trunk.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.3.1.2 |
olTrunkTypeThe type of trunk. ringIn(3) and ringOut(4) refer to special
trunks on the token ring protocol type modules.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.3.1.3 |
olTrunkConnectorThe connector type of this trunk.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.3.1.4 |
olTrunkStatusThe status of this trunk.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.3.1.5 |
olTrunkAdminStateThe desired state of this trunk. Enabling a trunk allows
the trunk to pass network traffic.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.3.1.6 |
olTrunkWrapStateThe wrap state of this trunk. A trunk can wrap in
response to a network event such as a break in
the cable.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.3.1.7 |
olTrunkNeighborThe upstream or downstream neighbor of the trunk.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.3.1.8 |
olSpecMods OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4 |
ol50nnMCTL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.3 |
ol50nnMCTLModTableA table that contains information about each 50nnM-CTL
in the concentrator. Note, current architecture will
limit the number of instances to one per concentrator. SEQUENCE OF Ol50nnMCTLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.3.1 |
ol50nnMCTLModEntryA list of information for each 50nnM-CTL module
in the concentrator. Ol50nnMCTLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.3.1.1 |
ol50nnMCTLModSlotIndexThe slot number for this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.3.1.1.1 |
ol50nnMCTLModTempStatusThe temperature as detected by the probes on this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.3.1.1.2 |
ol51nnMMGT OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.4 |
ol51nnMMGTModTableA table that contains module information about each
51nnM-MGT module in the concentrator. SEQUENCE OF Ol51nnMMGTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.4.1 |
ol51nnMMGTModEntryA list of module information for each 51nnM-MGT module
in the concentrator. Ol51nnMMGTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.4.1.1 |
ol51nnMMGTModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.4.1.1.1 |
ol51nnMMGTModMasterPriorityThe mastership priority of this agent. Ten is the
highest and one is the lowest. Priority is
only used when an election occurs. Mastership is not
preemptive unless the reset mastership command is used.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.4.1.1.2 |
ol51nnMMGTModMasterStatusThe mastership status of this agent.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.4.1.1.3 |
ol51nnMMGTModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the mac address of port 1. Note
that EMMs before v3.0 will have 00-00-00-00-00-00 as their
station address.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.4.1.1.4 |
ol51nnMMGTPortTableA table of information that contains port-specific
information for each port on each 51nnM-MGT module. SEQUENCE OF Ol51nnMMGTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.4.2 |
ol51nnMMGTPortEntryA list of information about a specific port on a
51nnM-MGT module. Ol51nnMMGTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.4.2.1 |
ol51nnMMGTPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.4.2.1.1 |
ol51nnMMGTPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.4.2.1.2 |
ol51nnMMGTIpAddressThe IP Address associated with this port.ro IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.4.2.1.3 |
ol51nnMFIB OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.5 |
ol51nnMFIBModTableA table of module-specific information for each
51nnM-FIB module in the concentrator. SEQUENCE OF Ol51nnMFIBModEntry .1.3.6.1.4.1.49.2.3.1.4.4.5.1 |
ol51nnMFIBModEntryA list of module-specific information associated
with a particular 51nnM-FIB module in the concentrator. Ol51nnMFIBModEntry .1.3.6.1.4.1.49.2.3.1.4.4.5.1.1 |
ol51nnMFIBModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.5.1.1.1 |
ol51nnMFIBModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.5.1.1.2 |
ol51nnMFIBModLLWThe current state of this module's low light warning
configuration. Enabling this feature causes the module to
check for low light and to issue a warning if low light is
present. Disabling low light has the advantage of faster
redundancy switchover in the event of a port error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.5.1.1.3 |
ol51nnMFIBModDipLLWThe low light warning configuration indicated by this module's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.5.1.1.4 |
ol51nnMFIBPortTableA table of port-specific information for each port
of each 51nnM-FIB module. SEQUENCE OF Ol51nnMFIBPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.5.2 |
ol51nnMFIBPortEntryA list of information about a specific port on a
51nnM-FIB module. Ol51nnMFIBPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.5.2.1 |
ol51nnMFIBPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.1 |
ol51nnMFIBPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.2 |
ol51nnMFIBPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.3 |
ol51nnMFIBPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.4 |
ol51nnMFIBPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.5 |
ol51nnMFIBPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.5.2.1.6 |
ol51nnMUTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.6 |
ol51nnMUTPModTableA list of module-specific information associated
with a particular 51nnM-UTP module in the concentrator. SEQUENCE OF Ol51nnMUTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.6.1 |
ol51nnMUTPModEntryA module entry containing objects that describe the
module level for that particular module. Ol51nnMUTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.6.1.1 |
ol51nnMUTPModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.1 |
ol51nnMUTPModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.2 |
ol51nnMUTPModCrossoverThe current state of this module's crossover
configuration. Setting this object to uncrossed(2)
allows the last port to be used to connect to another
repeater. Often this feature is used to connect one 10BASE-T
module to another.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.3 |
ol51nnMUTPModDipCrossoverThe crossover configuration indicated by this module's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.4 |
ol51nnMUTPModFFLThe number of bits to store in the repeater's fifo
buffer. See the module user's guide for more information.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.5 |
ol51nnMUTPModDipFFLThe fifo fill level as indicated by this module's dip
switches.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.1.1.6 |
ol51nnMUTPPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMUTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.6.2 |
ol51nnMUTPPortEntryA port entry containing objects that describe this port. Ol51nnMUTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1 |
ol51nnMUTPPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.1 |
ol51nnMUTPPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.2 |
ol51nnMUTPPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.3 |
ol51nnMUTPPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.4 |
ol51nnMUTPPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.5 |
ol51nnMUTPPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.6 |
ol51nnMUTPPortLinkIntegThe port's link integrity configuration. Enabling
link integrity configures the port to conform to
the link integrity feature as specified by 10BASE-T.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.7 |
ol51nnMUTPPortDipLinkIntegThe link integrity configuration as indicated by this
port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.8 |
ol51nnMUTPPortSquelchThe port's squelch configuration. See the module's
user's guide for more information.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.9 |
ol51nnMUTPPortDipSquelchThe port's squelch configuration as indicated by this
port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.6.2.1.10 |
ol51nnMTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.7 |
ol51nnMTPModTableA table of module-specific information for each
51nnM-TP module in the concentrator. SEQUENCE OF Ol51nnMTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.7.1 |
ol51nnMTPModEntryA list of module-specific information about a
specific 51nnM-TP module in the concentrator. Ol51nnMTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.7.1.1 |
ol51nnMTPModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.7.1.1.1 |
ol51nnMTPModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.1.1.2 |
ol51nnMTPModCrossoverThe current state of this module's crossover
configuration. Setting this object to uncrossed(2)
allows the last port to be used to connect to another
repeater. Often this feature is used to connect one 10BASE-T
module to another.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.1.1.3 |
ol51nnMTPModDipCrossoverThe crossover configuration indicated by this module's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.1.1.4 |
ol51nnMTPPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.7.2 |
ol51nnMTPPortEntryA port entry containing objects that describe this port. Ol51nnMTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1 |
ol51nnMTPPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.1 |
ol51nnMTPPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.2 |
ol51nnMTPPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.3 |
ol51nnMTPPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.4 |
ol51nnMTPPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.5 |
ol51nnMTPPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.6 |
ol51nnMTPPortLinkIntegThe port's link integrity configuration. Enabling
link integrity configures the port to conform to
the link integrity feature as specified by 10BASE-T.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.7 |
ol51nnMTPPortDipLinkIntegThe link integrity configuration as indicated by this
port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.8 |
ol51nnMTPPortSquelchThe port's squelch configuration. See the module's
user's guide for more information.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.9 |
ol51nnMTPPortDipSquelchThe port's squelch configuration as indicated by this
port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.7.2.1.10 |
ol51nnMBNC OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.8 |
ol51nnMBNCModTableA list of module-specific information associated
with a particular 51nnM-BNC module in the concentrator. SEQUENCE OF Ol51nnMBNCModEntry .1.3.6.1.4.1.49.2.3.1.4.4.8.1 |
ol51nnMBNCModEntryA module entry containing objects that describe the
module level for that particular module. Ol51nnMBNCModEntry .1.3.6.1.4.1.49.2.3.1.4.4.8.1.1 |
ol51nnMBNCModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.8.1.1.1 |
ol51nnMBNCModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.8.1.1.2 |
ol51nnMBNCPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMBNCPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.8.2 |
ol51nnMBNCPortEntryA port entry containing objects that describe this port. Ol51nnMBNCPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.8.2.1 |
ol51nnMBNCPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.8.2.1.1 |
ol51nnMBNCPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.8.2.1.2 |
ol51nnMBNCPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.8.2.1.3 |
ol51nnMBNCPortDipTerminationThe state of this port's termination as indicated by the
port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.8.2.1.4 |
ol51nnMBNCPortDipGroundThe state of this port's ground as indicated by the port's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.8.2.1.5 |
ol51nnBEE OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.9 |
ol51nnBEEModTableA table of module-specific information for
each 51nnB-EE module in the concentrator. SEQUENCE OF Ol51nnBEEModEntry .1.3.6.1.4.1.49.2.3.1.4.4.9.1 |
ol51nnBEEModEntryA list of module-specific information about a specific
51nnB-EE module in the concentrator. Ol51nnBEEModEntry .1.3.6.1.4.1.49.2.3.1.4.4.9.1.1 |
ol51nnBEEModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.9.1.1.1 |
ol51nnBEEModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the mac address of port 1.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.9.1.1.2 |
ol51nnBEEModProtocolsA textual description of the protocols supported by
this modulero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.49.2.3.1.4.4.9.1.1.3 |
ol51nnBEEPortTableA table of port-specific for each port of each
51nnBEE module in the concentrator. SEQUENCE OF Ol51nnBEEPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.9.2 |
ol51nnBEEPortEntryA list of port-specific informatoin about a specific
51nnB-EE port in the concentrator. Ol51nnBEEPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.9.2.1 |
ol51nnBEEPortSlotIndexThe slot number for this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.9.2.1.1 |
ol51nnBEEPortIndexThe port number for this port within this slot.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.9.2.1.2 |
ol51nnBEEPortIpAddressThe IP Address associated with this port.ro IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.9.2.1.3 |
ol51nnBEEPortDipNetworkThe network for this port as specified by this port's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.9.2.1.4 |
ol51nnBEEPortDefNetworkThe network for this port as specified by the OEBM's
non-volatile storage.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.9.2.1.5 |
ol51nnRES OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.10 |
ol51nnRESModTableA table of module-specific information for
each 51nnR-ES module in the concentrator. SEQUENCE OF Ol51nnRESModEntry .1.3.6.1.4.1.49.2.3.1.4.4.10.1 |
ol51nnRESModEntryA list of module-specific information about a specific
51nnR-ES module in the concentrator. Ol51nnRESModEntry .1.3.6.1.4.1.49.2.3.1.4.4.10.1.1 |
ol51nnRESModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.10.1.1.1 |
ol51nnRESModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the mac address of port 1.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.10.1.1.2 |
ol51nnRESModProtocolsA textual description of the protocols supported by
this modulero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.49.2.3.1.4.4.10.1.1.3 |
ol51nnRESPortTableA table of port-specific for each port of each
51nnR-ES module in the concentrator. SEQUENCE OF Ol51nnRESPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.10.2 |
ol51nnRESPortEntryA list of port-specific informatoin about a specific
51nnR-ES port in the concentrator. Ol51nnRESPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.10.2.1 |
ol51nnRESPortSlotIndexThe slot number for this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.10.2.1.1 |
ol51nnRESPortIndexThe port number for this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.10.2.1.2 |
ol51nnRESPortIpAddressThe IP Address associated with this port.ro IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.10.2.1.3 |
ol51nnRESPortDipNetworkThe network for this port as specified by this port's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.10.2.1.4 |
ol51nnRESPortDefNetworkThe network for this port as specified by the OERM's
non-volatile storage.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.10.2.1.5 |
ol51nnREE OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.11 |
ol51nnREEModTableA table of module-specific information for
each 51nnR-EE module in the concentrator. SEQUENCE OF Ol51nnREEModEntry .1.3.6.1.4.1.49.2.3.1.4.4.11.1 |
ol51nnREEModEntryA list of module-specific information about a specific
51nnR-EE module in the concentrator. Ol51nnREEModEntry .1.3.6.1.4.1.49.2.3.1.4.4.11.1.1 |
ol51nnREEModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.11.1.1.1 |
ol51nnREEModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the mac address of port 1.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.11.1.1.2 |
ol51nnREEModProtocolsA textual description of the protocols supported by
this modulero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.49.2.3.1.4.4.11.1.1.3 |
ol51nnREEPortTableA table of port-specific for each port of each
51nnR-EE module in the concentrator. SEQUENCE OF Ol51nnREEPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.11.2 |
ol51nnREEPortEntryA list of port-specific informatoin about a specific
51nnR-EE port in the concentrator. Ol51nnREEPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.11.2.1 |
ol51nnREEPortSlotIndexThe slot number for this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.11.2.1.1 |
ol51nnREEPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.11.2.1.2 |
ol51nnREEPortIpAddressThe IP Address associated with this port.ro IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.11.2.1.3 |
ol51nnREEPortDipNetworkThe network for this port as specified by this port's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.11.2.1.4 |
ol51nnREEPortDefNetworkThe network for this port as specified by the OERM's
non-volatile storage.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.11.2.1.5 |
ol51nnMAUIF OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.12 |
ol51nnMAUIFModTableA list of module-specific information associated
with a particular 51nnMAUIF module in the concentrator. SEQUENCE OF Ol51nnMAUIFModEntry .1.3.6.1.4.1.49.2.3.1.4.4.12.1 |
ol51nnMAUIFModEntryA list of module-specific information about a specific
51nnMAUIF module in the concentrator. Ol51nnMAUIFModEntry .1.3.6.1.4.1.49.2.3.1.4.4.12.1.1 |
ol51nnMAUIFModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.12.1.1.1 |
ol51nnMAUIFPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMAUIFPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.12.2 |
ol51nnMAUIFPortEntryA list of module-specific information about a specific
51nnM-AUIF port in the concentrator. Ol51nnMAUIFPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1 |
ol51nnMAUIFPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.1 |
ol51nnMAUIFPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.2 |
ol51nnMAUIFPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.3 |
ol51nnMAUIFPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.4 |
ol51nnMAUIFPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.5 |
ol51nnMAUIFPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.6 |
ol51nnMAUIFPortDipNetworkThe network indicated by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.12.2.1.7 |
ol51nnMAUIM OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.13 |
ol51nnMAUIMModTableA list of module-specific information associated
with a particular 51nnM-AUIM module in the concentrator. SEQUENCE OF Ol51nnMAUIMModEntry .1.3.6.1.4.1.49.2.3.1.4.4.13.1 |
ol51nnMAUIMModEntryA list of module-specific information about a specific
51nnM-AUIM module in the concentrator. Ol51nnMAUIMModEntry .1.3.6.1.4.1.49.2.3.1.4.4.13.1.1 |
ol51nnMAUIMModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.13.1.1.1 |
ol51nnMAUIMPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMAUIMPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.13.2 |
ol51nnMAUIMPortEntryA list of module-specific information about a specific
51nnM-AUIM port in the concentrator. Ol51nnMAUIMPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1 |
ol51nnMAUIMPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.1 |
ol51nnMAUIMPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.2 |
ol51nnMAUIMPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.3 |
ol51nnMAUIMPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.4 |
ol51nnMAUIMPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.5 |
ol51nnMAUIMPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.6 |
ol51nnMAUIMPortDipNetworkThe network indicated by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.7 |
ol51nnMAUIMPortSQETestThe current SQE test configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.8 |
ol51nnMAUIMPortDipSQETestThe SQE test configuration for this port as indicated
by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.9 |
ol51nnMAUIMPortCollisionThe current collision configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.10 |
ol51nnMAUIMPortDipCollisionThe collision configuration for this port as indicated
by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.11 |
ol51nnMAUIMPortHalfStepThe current step configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.12 |
ol51nnMAUIMPortDipHalfStepThe step configuration for this port as indicated
by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.13.2.1.13 |
ol5208MTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.14 |
ol5208MTPModTableA list of module-specific information associated
with a particular 5208M-TP module in the concentrator. SEQUENCE OF Ol5208MTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.14.1 |
ol5208MTPModEntryA description of the 5208M-TP module attributes. Ol5208MTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.14.1.1 |
ol5208MTPModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.14.1.1.1 |
ol5208MTPModBypsAdminStateThe desired state of this module with respect
to the ring. Setting this attribute to bypass(2)
will cause this module to be removed from the ring
that passes through the module's ring in and ring out
ports.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.1.1.2 |
ol5208MTPModBypsOperStateThe operational state of this module with respect
to the ring. If this attribute is equal to bypass(2),
then the module has been removed from the ring that
passes through the module's ring in and ring out ports.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.1.1.3 |
ol5208MTPModDipCableImpThe setting of this module's port impedance matching, with
100 ohm corresponding to unshielded twisted pair cabling and
150 ohm corresponding to shielded twisted pair cabling.
This setting is valid for all ports on this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.1.1.4 |
ol5208MTPPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol5208MTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.14.2 |
ol5208MTPPortEntryA description of 5208M-TP port attributes. Ol5208MTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.14.2.1 |
ol5208MTPPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.14.2.1.1 |
ol5208MTPPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.14.2.1.2 |
ol5208MTPPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.2.1.3 |
ol5208MTPPortStationTypeDetermines whether the station connected to this port
has a MAC address.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.2.1.4 |
ol5208MTPTrunkTableA list of trunk-specific information about each trunk
for this module type. SEQUENCE OF Ol5208MTPTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.14.3 |
ol5208MTPTrunkEntryA description of 5208M-TP trunk attributes. Ol5208MTPTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1 |
ol5208MTPTrunkSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olTrunkSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.1 |
ol5208MTPTrunkIndexThe trunk number for this trunk.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.2 |
ol5208MTPTrunkDipAdminStateThe state of this trunk as indicated by the trunk's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.3 |
ol5208MTPTrunkCableMonThe cable monitor configuration for this trunk.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.4 |
ol5208MTPTrunkDipCableMonThe cable monitor configuration as indicated by this trunk's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.5 |
ol5208MTPTrunkNetMapStateThe map state of the copper ring-in trunk. This
should be set to external for ring-in trunks which
connect to external hubs. The mapping logic will not
operate on trunks which are set to external. This
prevents incorrect mapping which can occur when a
module in one hub detects the mapping signal from
another hub. This attribute only applies to copper
ring-in trunks.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.6 |
ol5208MTPTrunkExtBcnRecoveryIndicates whether the trunk is connected to a
segment that will perform beacon recovery. This
should be set to exists(1) for trunks which connect
to hubs which perform beacon recovery. This attribute
is used to determine the fault domain when resolving a
beaconing condition.
The beacon recovery process will resolve beaconing on
trunks with this attribute set to nonExists(2) before
trunks with the attribute set to exists(1) are resolved.
For backplane trunks, setting to a value other than
notApplicable will return invalidData error. The
default value is nonExists(2).rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.14.3.1.7 |
ol51nnMFP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.15 |
ol51nnMFPModTableA list of module-specific information associated
with a particular 51nnM-FP module in the concentrator. SEQUENCE OF Ol51nnMFPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.15.1 |
ol51nnMFPModEntryA list of module-specific information about a specific
51nnM-FP module in the concentrator. Ol51nnMFPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.15.1.1 |
ol51nnMFPModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.15.1.1.1 |
ol51nnMFPPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMFPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.15.2 |
ol51nnMFPPortEntryA list of module-specific information about a specific
51nnM-FP port in the concentrator. Ol51nnMFPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1 |
ol51nnMFPPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.1 |
ol51nnMFPPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.2 |
ol51nnMFPPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.3 |
ol51nnMFPPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.4 |
ol51nnMFPPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.5 |
ol51nnMFPPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.6 |
ol51nnMFPPortDipNetworkThe network indicated by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.7 |
ol51nnMFPPortLLWThe current low light warning configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.8 |
ol51nnMFPPortDipLLWThe low light warning configuration indicated by this module's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.9 |
ol51nnMFPPortHipwrThe current high power optic configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.10 |
ol51nnMFPPortDipHipwrThe high power optic configuration for this port as indicated
by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.15.2.1.11 |
ol51nnMFBP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.16 |
ol51nnMFBPModTableA list of module-specific information associated
with a particular 51nnM-FBP module in the concentrator. SEQUENCE OF Ol51nnMFBPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.16.1 |
ol51nnMFBPModEntryA list of module-specific information about a specific
51nnM-FBP module in the concentrator. Ol51nnMFBPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.16.1.1 |
ol51nnMFBPModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.16.1.1.1 |
ol51nnMFBPPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMFBPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.16.2 |
ol51nnMFBPPortEntryA list of module-specific information about a specific
51nnM-FBP port in the concentrator. Ol51nnMFBPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1 |
ol51nnMFBPPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.1 |
ol51nnMFBPPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.2 |
ol51nnMFBPPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.3 |
ol51nnMFBPPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.4 |
ol51nnMFBPPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.5 |
ol51nnMFBPPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.6 |
ol51nnMFBPPortDipNetworkThe network indicated by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.7 |
ol51nnMFBPPortLLWThe current low light warning configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.8 |
ol51nnMFBPPortDipLLWThe low light warning configuration indicated by this module's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.9 |
ol51nnMFBPPortHipwrThe current high power optic configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.10 |
ol51nnMFBPPortDipHipwrThe high power optic configuration for this port as indicated
by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.16.2.1.11 |
ol51nnMTPL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.17 |
ol51nnMTPLModTableA list of module-specific information associated
with a particular 51nnM-TPL module in the concentrator. SEQUENCE OF Ol51nnMTPLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.17.1 |
ol51nnMTPLModEntryA list of module-specific information about a specific
51nnM-TPL module in the concentrator. Ol51nnMTPLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.17.1.1 |
ol51nnMTPLModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.17.1.1.1 |
ol51nnMTPLModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.1.1.2 |
ol51nnMTPLPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMTPLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.17.2 |
ol51nnMTPLPortEntryA list of module-specific information about a specific
51nnM-TPL port in the concentrator. Ol51nnMTPLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1 |
ol51nnMTPLPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.1 |
ol51nnMTPLPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.2 |
ol51nnMTPLPortAdminStateThe desired state of this port. Setting this port to
be redundant or for remote diagnostics with invalid settings
of buddy slot and buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.3 |
ol51nnMTPLPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.
If the port is configured for remote diagnostics, then
this contains the slot index of the backup buddy port.
To configure a port for remote diagnostics, the buddy's
slot and port must be set to valid values.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.4 |
ol51nnMTPLPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.
If the port is configured for remote diagnostics, then
this contains the port index of the backup buddy port.
To configure a port for remote diagnostics, the buddy's
slot and port must be set to valid values.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.5 |
ol51nnMTPLPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.6 |
ol51nnMTPLPortLinkIntegThe current link integrity configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.7 |
ol51nnMTPLPortDipLinkIntegThe link integrity configuration as indicated by this
module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.8 |
ol51nnMTPLPortSquelchThe current squelch configuration for this port. See
the module's user's guide for more information.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.9 |
ol51nnMTPLPortJabberThe current receive jabber configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.10 |
ol51nnMTPLPortDipJabberThe receive jabber configuration as indicated by this
module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.17.2.1.11 |
ol51nnMTPPL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.18 |
ol51nnMTPPLModTableA list of module-specific information about a specific
51nnM-TPPL module in the concentrator. SEQUENCE OF Ol51nnMTPPLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.18.1 |
ol51nnMTPPLModEntryA list of module-specific information about a specific
51nnM-TPPL module in the concentrator. Ol51nnMTPPLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.18.1.1 |
ol51nnMTPPLModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.18.1.1.1 |
ol51nnMTPPLPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMTPPLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.18.2 |
ol51nnMTPPLPortEntryA list of module-specific information about a specific
51nnM-TPPL port in the concentrator. Ol51nnMTPPLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1 |
ol51nnMTPPLPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.1 |
ol51nnMTPPLPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.2 |
ol51nnMTPPLPortAdminStateThe desired state of this port. Setting this port to
be redundant or for remote diagnostics with invalid settings
of buddy slot and buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.3 |
ol51nnMTPPLPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.
If the port is configured for remote diagnostics, then
this contains the slot index of the backup buddy port.
To configure a port for remote diagnostics, the buddy's
slot and port must be set to valid values.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.4 |
ol51nnMTPPLPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.
If the port is configured for remote diagnostics, then
this contains the port index of the backup buddy port.
To configure a port for remote diagnostics, the buddy's
slot and port must be set to valid values.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.5 |
ol51nnMTPPLPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.6 |
ol51nnMTPPLPortDipNetworkThe network indicated by the port's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.7 |
ol51nnMTPPLPortLinkIntegThe current link integrity configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.8 |
ol51nnMTPPLPortDipLinkIntegThe link integrity configuration as indicated by this
module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.9 |
ol51nnMTPPLPortSquelchThe current squelch configuration for this port. See
the module's user's guide for more information.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.10 |
ol51nnMTPPLPortJabberThe current receive jabber configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.11 |
ol51nnMTPPLPortDipJabberThe receive jabber configuration as indicated by this
module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.18.2.1.12 |
ol52nnMTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.19 |
ol52nnMTPModTableA list of module-specific information about a specific
52nnM-TP module in the concentrator. SEQUENCE OF Ol52nnMTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.19.1 |
ol52nnMTPModEntryA description of the 52nnM-TP module attributes. Ol52nnMTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.19.1.1 |
ol52nnMTPModSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olModSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.19.1.1.1 |
ol52nnMTPModRingSpeedThe ring's bandwidth.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.19.1.1.2 |
ol52nnMTPModDipRingSpeedThe dip switch setting for the ring's bandwidth.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.19.1.1.3 |
ol52nnMTPModCableImpThe setting of this module's port impedance matching, with
100 ohm corresponding to unshielded twisted pair cabling and
150 ohm corresponding to shielded twisted pair cabling.
This setting is valid for all ports on this module.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.19.1.1.4 |
ol52nnMTPModDipCableImpThe dip switch setting for the module's port impedance
matching.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.19.1.1.5 |
ol52nnMTPPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol52nnMTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.19.2 |
ol52nnMTPPortEntryA description of 52nnM-TP port attributes. Ol52nnMTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.19.2.1 |
ol52nnMTPPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.19.2.1.1 |
ol52nnMTPPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.19.2.1.2 |
ol52nnMTPPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.19.2.1.3 |
ol52nnMTPPortStationTypeDetermines whether the station connected to this port
has a MAC address.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.19.2.1.4 |
ol52nnMTPTrunkTableA list of trunk-specific information about each trunk
for this module type. SEQUENCE OF Ol52nnMTPTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.19.3 |
ol52nnMTPTrunkEntryA description of 52nnM-TP trunk attributes. Ol52nnMTPTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.19.3.1 |
ol52nnMTPTrunkSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olTrunkSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.19.3.1.1 |
ol52nnMTPTrunkIndexThe trunk number for this trunk.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.19.3.1.2 |
ol52nnMTPTrunkDipAdminStateThe state of this trunk as indicated by the trunk's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.19.3.1.3 |
ol52nnMFR OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.20 |
ol52nnMFRModTableA list of module-specific information about a specific
52nnM-FR module in the concentrator. SEQUENCE OF Ol52nnMFRModEntry .1.3.6.1.4.1.49.2.3.1.4.4.20.1 |
ol52nnMFRModEntryA description of the 52nnMFR module attributes. Ol52nnMFRModEntry .1.3.6.1.4.1.49.2.3.1.4.4.20.1.1 |
ol52nnMFRModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.20.1.1.1 |
ol52nnMFRModRingSpeedThe ring's bandwidth.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.1.1.2 |
ol52nnMFRModDipRingSpeedThe dip switch setting for the ring's bandwidth.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.1.1.3 |
ol52nnMFRPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol52nnMFRPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.20.2 |
ol52nnMFRPortEntryA description of 52nnMFR port attributes. Ol52nnMFRPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.20.2.1 |
ol52nnMFRPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.20.2.1.1 |
ol52nnMFRPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.20.2.1.2 |
ol52nnMFRPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.2.1.3 |
ol52nnMFRPortCableImpThe setting of this port's impedance matching, with 100 ohm
corresponding to unshielded twisted pair cabling and 150 ohm
corresponding to shielded twisted pair cabling.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.2.1.4 |
ol52nnMFRPortStationTypeDetermines whether the station connected to this port
has a MAC address.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.2.1.5 |
ol52nnMFRTrunkTableA list of trunk-specific information about each trunk
for this module type. SEQUENCE OF Ol52nnMFRTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.20.3 |
ol52nnMFRTrunkEntryA description of 52nnMFR trunk attributes. Ol52nnMFRTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1 |
ol52nnMFRTrunkSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olTrunkSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.1 |
ol52nnMFRTrunkIndexThe trunk number of this trunk.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.2 |
ol52nnMFRTrunkDipAdminStateThe state of this trunk as indicated by the trunk's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.3 |
ol52nnMFRTrunkCableMonThe cable monitor configuration for this trunk. This
does not apply to fiber trunks.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.4 |
ol52nnMFRTrunkDipCableMonThe cable monitor configuration as indicated by this trunk's
dip switches. This does not apply to fiber trunks.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.5 |
ol52nnMFRTrunkCompModeThe compatibility mode for this trunk. This
only applies to fiber trunks.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.6 |
ol52nnMFRTrunkDipCompModeThe compatibility mode as indicated by this trunk's
dip switches. This only applies to fiber trunks.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.7 |
ol52nnMFRTrunkNetMapStateThe map state of the copper ring-in trunk. This
should be set to external for ring-in trunks which
connect to external hubs. The mapping logic will not
operate on trunks which are set to external. This
prevents incorrect mapping which can occur when a
module in one hub detects the mapping signal from
another hub. This attribute only applies to copper
ring-in trunks.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.8 |
ol52nnMFRTrunkExtBcnRecoveryIndicates whether the trunk is connected to a
segment that will perform beacon recovery. This
should be set to exists(1) for trunks which connect
to hubs which perform beacon recovery. This attribute
is used to determine the fault domain when resolving a
beaconing condition.
The beacon recovery process will resolve beaconing on
trunks with this attribute set to nonExists(2) before
trunks with the attribute set to exists(1) are resolved.
For backplane trunks, setting to a value other than
notApplicable will return invalidData error. The
default value is nonExists(2).rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.9 |
ol51nnMTS OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.21 |
ol51nnMTSModTableA table of module-specific information for each
51nnM-TS module in the concentrator. SEQUENCE OF Ol51nnMTSModEntry .1.3.6.1.4.1.49.2.3.1.4.4.21.1 |
ol51nnMTSModEntryA list of module information for each 51nnMTS module
in the concentrator. Ol51nnMTSModEntry .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1 |
ol51nnMTSModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.1 |
ol51nnMTSModProtocolsA textual description of the protocols supported by
this modulero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.2 |
ol51nnMTSModIpAddressThe IP Address of the terminal terver.ro IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.3 |
ol51nnMTSModTCPPortThe TCP port number of the the terminal server's remote
console port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.4 |
ol51nnMTSModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the mac address of the terminal server.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.5 |
ol51nnMTSModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.6 |
ol51nnMTSModCPURevThe terminal server's CPU revision.ro DisplayString .1.3.6.1.4.1.49.2.3.1.4.4.21.1.1.7 |
ol51nnMTSPortTableA table of information that contains port-specific
information for each port on each 51nnMTS module. SEQUENCE OF Ol51nnMTSPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.21.2 |
ol51nnMTSPortEntryA list of information about a specific port on a
51nnMTS module. Ol51nnMTSPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.21.2.1 |
ol51nnMTSPortSlotIndexThe slot number for this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.21.2.1.1 |
ol51nnMTSPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.21.2.1.2 |
ol51nnMTSPortAdminStateThe administrative state of this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.21.2.1.3 |
ol51nnMTSPortOperStateThe operational mode of this port.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.21.2.1.4 |
ol51nnMFL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.22 |
ol51nnMFLModTableA table of module-specific information for each
51nnM-FL module in the concentrator. SEQUENCE OF Ol51nnMFLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.22.1 |
ol51nnMFLModEntryA list of module-specific information associated
with a particular 51nnM-FL module in the concentrator. Ol51nnMFLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.22.1.1 |
ol51nnMFLModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.22.1.1.1 |
ol51nnMFLModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.22.1.1.2 |
ol51nnMFLPortTableA table of port-specific information for each port
of each 51nnMFL module. SEQUENCE OF Ol51nnMFLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.22.2 |
ol51nnMFLPortEntryA list of information about a specific port on a
51nnMFL module. Ol51nnMFLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.22.2.1 |
ol51nnMFLPortSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olPortSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.1 |
ol51nnMFLPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.2 |
ol51nnMFLPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return invalidData error. Remote
Failure Signaling (RFS), is set on connected module
port to permit transmit error detection on local port.
Port must be set to be RFS when connected port is set to
be redundantrw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.3 |
ol51nnMFLPortBuddySlotThe slot index of the redundant port's buddy.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.4 |
ol51nnMFLPortBuddyPortThe port index of the redundant port's buddy.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.5 |
ol51nnMFLPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.22.2.1.6 |
ol50nnMRCTL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.23 |
ol50nnMRCTLModTableA table that contains information about each 50nnMRCTL
in the concentrator. SEQUENCE OF Ol50nnMRCTLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.23.1 |
ol50nnMRCTLModEntryA list of information for each 50nnMRCTL module
in the concentrator. Ol50nnMRCTLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.23.1.1 |
ol50nnMRCTLModSlotIndexThe slot number for this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.23.1.1.1 |
ol50nnMRCTLModOperStateThe operational state of the 50nnMRCTL module. Specifically,
this is an indicator of whether the 50nnMRCTL module is
providing clock signals to the backplane. An active 50nnMRCTL
module provides clock signals to the backplane while a standby
50nnMRCTL module does not. Note that only one 50nnMRCTL
module will be active at any given time; all other 50nnMRCTL
modules in the concentrator will be in standby mode.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.23.1.1.2 |
ol50nnMRCTLModClockStatusThe current status of the on-board clocks on this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.23.1.1.3 |
ol50nnMRCTLModTempStatusThe temperature as detected by the probe on this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.23.1.1.4 |
ol51nnMFB OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.24 |
ol51nnMFBModTableA list of module-specific information associated
with a particular 51nnM-FB module in the concentrator. SEQUENCE OF Ol51nnMFBModEntry .1.3.6.1.4.1.49.2.3.1.4.4.24.1 |
ol51nnMFBModEntryA list of module-specific information about a specific
51nnM-FB module in the concentrator. Ol51nnMFBModEntry .1.3.6.1.4.1.49.2.3.1.4.4.24.1.1 |
ol51nnMFBModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.24.1.1.1 |
ol51nnMFBModDipNetworkThe network indicated by the module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.24.1.1.2 |
ol51nnMFBModLLWThe current state of this module's low light warning
configuration. Enabling this feature causes the module to
check for low light and to issue a warning if low light is
present. Disabling low light has the advantage of faster
redundancy switchover in the event of a port error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.24.1.1.3 |
ol51nnMFBModDipLLWThe low light warning configuration indicated by this module's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.24.1.1.4 |
ol51nnMFBPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMFBPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.24.2 |
ol51nnMFBPortEntryA list of module-specific information about a specific
51nnM-FB port in the concentrator. Ol51nnMFBPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.24.2.1 |
ol51nnMFBPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.1 |
ol51nnMFBPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.2 |
ol51nnMFBPortAdminStateThe desired state of this port. Setting this port to
be redundant with invalid settings of buddy slot and
buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.3 |
ol51nnMFBPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.4 |
ol51nnMFBPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.5 |
ol51nnMFBPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.24.2.1.6 |
ol53nnMMGT OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.25 |
ol53nnMMGTModTableA list of module attributes that apply to this model.
To access an ol53nnMMGTModTable entry, the
ol53nnMMGTModSlotIndex attribute is used. SEQUENCE OF Ol53nnMMGTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.25.1 |
ol53nnMMGTModEntryA list of module-specific information about a specific
53nnM-MGT module in the concentrator. Ol53nnMMGTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1 |
ol53nnMMGTModSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of olModSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.1 |
ol53nnMMGTModMasterPriorityThe mastership priority of this agent. Ten is the
highest and one is the lowest. Priority is only
used when an election occurs. Mastership is not
preemptive unless the reset mastership command is used.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.2 |
ol53nnMMGTModMasterStatusThe mastership status of this agent.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.3 |
ol53nnMMGTModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the MAC address of port 1.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.4 |
ol53nnMMGTModIpAddressThe IP address associated with this module.rw IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.5 |
ol53nnMMGTModDownStreamMACDown stream MACro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.6 |
ol53nnMMGTModUpStreamMACUp stream MACro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.7 |
ol53nnMMGTModfddiMACPathThe FDDI path which should be inserted into the MACrw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.8 |
ol53nnMMGTModDownStreamModuleDown stream slot (transmit to)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.9 |
ol53nnMMGTModUpStreamModuleUp stream slot (receve from)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.10 |
ol53nnMMGTModDownStreamOperPathTransmit DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.11 |
ol53nnMMGTModUpStreamOperPathReceive DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.12 |
ol53nnMMGTModRingInfoAn array which is indexed by DBA number. Each element
contains the slot number (1..16) which is assigned to
transmit on this DBA. (debug only)ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.25.1.1.13 |
ol53nnMMGTPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol53nnMMGTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.25.2 |
ol53nnMMGTPortEntryA list of module-specific information about a specific
53nnM-MGT port in the concentrator. Ol53nnMMGTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1 |
ol53nnMMGTPortSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olPortSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.1 |
ol53nnMMGTPortIndexA unique value that identifies a particular port within this
module. Its value ranges between 1 and olModPortNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olPortIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.2 |
ol53nnMMGTPortConfigSpecifies the FDDI port type (a or b).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.3 |
ol53nnMMGTPortPcmState(refer to ANSI SMT 9.6.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.4 |
ol53nnMMGTPortConnectStateAn indication of the connect state of this PORT.
Basically, this gives a higher level view of the
state of the connection by grouping PCM states and
the PC-Withhold flag state. The supported values
and their corresponding PCM states and PC-Withhold
condition, when relevant, are:
disabled: (PC0:Off, PC9:Maint)
connecting: (PC1(Break) || PC3 (Connect) || PC4(next) ||
PC5 (Signal) || PC6(Join) || PC7 (Verify)) &&
(PC_Withhold = None)
standby: (PC_Withhold != None)
active: (PC2:Trace || PC8:Active)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.5 |
ol53nnMMGTPortNeighborThe type (PC_Neighbor) of the remote PORT that is
determined in PC_Signaling in R_Val (1,2) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.6 |
ol53nnMMGTPortRemoteMACIndicatedThe indication, in PC-Signaling that the remote
partner intends to place a MAC in the output token
PATH of this PORT. Signaled as R_Val (9) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.7 |
ol53nnMMGTPortBSFlagThe Break State, BS_Flag (refer to ANSI SMT
9.4.3.4).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.8 |
ol53nnMMGTPortPCWithholdPC_Withhold, (refer to ANSI SMT 9.4.1).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.9 |
ol53nnMMGTPortLerConditionThis variable is set to true whenever LerEstimate
is less than or equal to LerAlarm (the larger the number
the smaller the value).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.25.2.1.10 |
ol53nnMMGTTrunkTableFDDI module specific trunk table variables.
At present there are none. SEQUENCE OF Ol53nnMMGTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.25.3 |
ol53nnMMGTTrunkEntryA description of 53nnM-MGT trunk attributes. Ol53nnMMGTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.25.3.1 |
ol53nnMMGTTrunkSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olTrunkSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.25.3.1.1 |
ol53nnMMGTTrunkIndexA unique value that identifies a particular trunk within this
module. Its value ranges between 1 and olModTrunkNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olTrunkIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.25.3.1.2 |
ol53nnMFBMIC OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.26 |
ol53nnMFBMICModTableA list of module attributes that apply to this model.
To access an ol53nnMFBMICModTable entry, the
ol53nnMFBMICModSlotIndex attribute is used. SEQUENCE OF Ol53nnMFBMICModEntry .1.3.6.1.4.1.49.2.3.1.4.4.26.1 |
ol53nnMFBMICModEntryA list of module-specific information about a specific
53nnM-FBMIC module in the concentrator. Ol53nnMFBMICModEntry .1.3.6.1.4.1.49.2.3.1.4.4.26.1.1 |
ol53nnMFBMICModSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of olModSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.1 |
ol53nnMFBMICModDownStreamModuleDown stream slot (transmit to)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.2 |
ol53nnMFBMICModUpStreamModuleUp stream slot (receve from)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.3 |
ol53nnMFBMICModDownStreamOperPathTransmit DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.4 |
ol53nnMFBMICModUpStreamOperPathReceive DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.5 |
ol53nnMFBMICModRingInfoAn array which is indexed by DBA number. Each element
contains the slot number (1..16) which is assigned to
transmit on this DBA. (debug only)ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.26.1.1.6 |
ol53nnMFBMICPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol53nnMFBMICPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.26.2 |
ol53nnMFBMICPortEntryA list of module-specific information about a specific
53nnM-FBMIC port in the concentrator. Ol53nnMFBMICPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1 |
ol53nnMFBMICPortSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olPortSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.1 |
ol53nnMFBMICPortIndexA unique value that identifies a particular port within this
module. Its value ranges between 1 and olModPortNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olPortIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.2 |
ol53nnMFBMICPortConfigSpecifies the FDDI port type. If the port is on an
FPM, the only allowed values are slave(3), and master(4).
In addition, there can only be one active slave port on any
concentrator FDDI network.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.3 |
ol53nnMFBMICPortPcmState(refer to ANSI SMT 9.6.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.4 |
ol53nnMFBMICPortConnectStateAn indication of the connect state of this PORT.
Basically, this gives a higher level view of the
state of the connection by grouping PCM states and
the PC-Withhold flag state. The supported values
and their corresponding PCM states and PC-Withhold
condition, when relevant, are:
disabled: (PC0:Off, PC9:Maint)
connecting: (PC1(Break) || PC3 (Connect) || PC4(next) ||
PC5 (Signal) || PC6(Join) || PC7 (Verify)) &&
(PC_Withhold = None)
standby: (PC_Withhold != None)
active: (PC2:Trace || PC8:Active)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.5 |
ol53nnMFBMICPortNeighborThe type (PC_Neighbor) of the remote PORT that is
determined in PC_Signaling in R_Val (1,2) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.6 |
ol53nnMFBMICPortRemoteMACIndicatedThe indication, in PC-Signaling that the remote
partner intends to place a MAC in the output token
PATH of this PORT. Signaled as R_Val (9) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.7 |
ol53nnMFBMICPortBSFlagThe Break State, BS_Flag (refer to ANSI SMT
9.4.3.4).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.8 |
ol53nnMFBMICPortPCWithholdPC_Withhold, (refer to ANSI SMT 9.4.1).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.9 |
ol53nnMFBMICPortLerConditionThis variable is set to true whenever LerEstimate
is less than or equal to LerAlarm (the larger the number
the smaller the value).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.26.2.1.10 |
ol53nnMFBMICTrunkTableFDDI module specific trunk table variables.
At present there are none. SEQUENCE OF Ol53nnMFBMICTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.26.3 |
ol53nnMFBMICTrunkEntryA description of 53nnM-FBMIC trunk attributes. Ol53nnMFBMICTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.26.3.1 |
ol53nnMFBMICTrunkSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olTrunkSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.26.3.1.1 |
ol53nnMFBMICTrunkIndexA unique value that identifies a particular trunk within this
module. Its value ranges between 1 and olModTrunkNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olTrunkIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.26.3.1.2 |
ol53nnMFIBST OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.27 |
ol53nnMFIBSTModTableA list of module attributes that apply to this model.
To access an ol53nnMFIBSTModTable entry, the
ol53nnMFIBSTModSlotIndex attribute is used. SEQUENCE OF Ol53nnMFIBSTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.27.1 |
ol53nnMFIBSTModEntryA list of module-specific information about a specific
53nnM-FIBST module in the concentrator. Ol53nnMFIBSTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.27.1.1 |
ol53nnMFIBSTModSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of olModSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.1 |
ol53nnMFIBSTModDownStreamModuleDown stream slot (transmit to)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.2 |
ol53nnMFIBSTModUpStreamModuleUp stream slot (receve from)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.3 |
ol53nnMFIBSTModDownStreamOperPathTransmit DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.4 |
ol53nnMFIBSTModUpStreamOperPathReceive DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.5 |
ol53nnMFIBSTModRingInfoAn array which is indexed by DBA number. Each element
contains the slot number (1..16) which is assigned to
transmit on this DBA. (debug only)ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.27.1.1.6 |
ol53nnMFIBSTPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol53nnMFIBSTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.27.2 |
ol53nnMFIBSTPortEntryA list of module-specific information about a specific
53nnM-FIBST port in the concentrator. Ol53nnMFIBSTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1 |
ol53nnMFIBSTPortSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olPortSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.1 |
ol53nnMFIBSTPortIndexA unique value that identifies a particular port within this
module. Its value ranges between 1 and olModPortNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olPortIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.2 |
ol53nnMFIBSTPortConfigSpecifies the FDDI port type. If the port is on an
FPM, the only allowed values are slave(3) and master(4).
In addition, there can only be one active slave port on any
concentrator FDDI network.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.3 |
ol53nnMFIBSTPortPcmState(refer to ANSI SMT 9.6.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.4 |
ol53nnMFIBSTPortConnectStateAn indication of the connect state of this PORT.
Basically, this gives a higher level view of the
state of the connection by grouping PCM states and
the PC-Withhold flag state. The supported values
and their corresponding PCM states and PC-Withhold
condition, when relevant, are:
disabled: (PC0:Off, PC9:Maint)
connecting: (PC1(Break) || PC3 (Connect) || PC4(next) ||
PC5 (Signal) || PC6(Join) || PC7 (Verify)) &&
(PC_Withhold = None)
standby: (PC_Withhold != None)
active: (PC2:Trace || PC8:Active)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.5 |
ol53nnMFIBSTPortNeighborThe type (PC_Neighbor) of the remote PORT that is
determined in PC_Signaling in R_Val (1,2) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.6 |
ol53nnMFIBSTPortRemoteMACIndicatedThe indication, in PC-Signaling that the remote
partner intends to place a MAC in the output token
PATH of this PORT. Signaled as R_Val (9) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.7 |
ol53nnMFIBSTPortBSFlagThe Break State, BS_Flag (refer to ANSI SMT
9.4.3.4).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.8 |
ol53nnMFIBSTPortPCWithholdPC_Withhold, (refer to ANSI SMT 9.4.1).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.9 |
ol53nnMFIBSTPortLerConditionThis variable is set to true whenever LerEstimate
is less than or equal to LerAlarm (the larger the number
the smaller the value).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.27.2.1.10 |
ol53nnMFIBSTTrunkTableFDDI module specific trunk table variables.
At present there are none. SEQUENCE OF Ol53nnMFIBSTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.27.3 |
ol53nnMFIBSTTrunkEntryA description of 53nnM-FIBST trunk attributes. Ol53nnMFIBSTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.27.3.1 |
ol53nnMFIBSTTrunkSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olTrunkSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.27.3.1.1 |
ol53nnMFIBSTTrunkIndexA unique value that identifies a particular trunk within this
module. Its value ranges between 1 and olModTrunkNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olTrunkIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.27.3.1.2 |
ol53nnMSTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.28 |
ol53nnMSTPModTableA list of module attributes that apply to this model.
To access an ol53nnMSTPModTable entry, the
ol53nnMSTPModSlotIndex attribute is used. SEQUENCE OF Ol53nnMSTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.28.1 |
ol53nnMSTPModEntryA list of module-specific information about a specific
53nnM-FIBSTP module in the concentrator. Ol53nnMSTPModEntry .1.3.6.1.4.1.49.2.3.1.4.4.28.1.1 |
ol53nnMSTPModSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of olModSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.1 |
ol53nnMSTPModDownStreamModuleDown stream slot (transmit to)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.2 |
ol53nnMSTPModUpStreamModuleDown stream slot (receve from)ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.3 |
ol53nnMSTPModDownStreamOperPathtransmit DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.4 |
ol53nnMSTPModUpStreamOperPathreceive DBA (debug only)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.5 |
ol53nnMSTPModRingInfoAn array which is indexed by DBA number. Each element
contains the slot number (1..16) which is assigned to
transmit on this DBA. (debug only)ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.28.1.1.6 |
ol53nnMSTPPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol53nnMSTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.28.2 |
ol53nnMSTPPortEntryA list of module-specific information about a specific
53nnM-STP port in the concentrator. Ol53nnMSTPPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1 |
ol53nnMSTPPortSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olPortSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.1 |
ol53nnMSTPPortIndexA unique value that identifies a particular port within this
module. Its value ranges between 1 and olModPortNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olPortIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.2 |
ol53nnMSTPPortConfigSpecifies the FDDI port type. If the port is on an
FPM, the only allowed values are slave(3) and master(4).
In addition, there can only be one active slave port on any
concentrator FDDI network.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.3 |
ol53nnMSTPPortPcmState(refer to ANSI SMT 9.6.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.4 |
ol53nnMSTPPortConnectStateAn indication of the connect state of this PORT.
Basically, this gives a higher level view of the
state of the connection by grouping PCM states and
the PC-Withhold flag state. The supported values
and their corresponding PCM states and PC-Withhold
condition, when relevant, are:
disabled: (PC0:Off, PC9:Maint)
connecting: (PC1(Break) || PC3 (Connect) || PC4(next) ||
PC5 (Signal) || PC6(Join) || PC7 (Verify)) &&
(PC_Withhold = None)
standby: (PC_Withhold != None)
active: (PC2:Trace || PC8:Active)ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.5 |
ol53nnMSTPPortNeighborThe type (PC_Neighbor) of the remote PORT that is
determined in PC_Signaling in R_Val (1,2) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.6 |
ol53nnMSTPPortRemoteMACIndicatedThe indication, in PC-Signaling that the remote
partner intends to place a MAC in the output token
PATH of this PORT. Signaled as R_Val (9) (refer
to ANSI SMT 9.6.3.2).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.7 |
ol53nnMSTPPortBSFlagThe Break State, BS_Flag (refer to ANSI SMT
9.4.3.4).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.8 |
ol53nnMSTPPortPCWithholdPC_Withhold, (refer to ANSI SMT 9.4.1).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.9 |
ol53nnMSTPPortLerConditionThis variable is set to true whenever LerEstimate
is less than or equal to LerAlarm (the larger the number
the smaller the value).ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.10 |
ol53nnMSTPPortPersonalitySpecifies the physical signaling used by the port, the only
valid values are sddi(3) and tpddi(4).rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.28.2.1.11 |
ol53nnMSTPTrunkTableFDDI module specific trunk table variables.
At present there are none. SEQUENCE OF Ol53nnMSTPTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.28.3 |
ol53nnMSTPTrunkEntryA description of 53nnM-STP trunk attributes. Ol53nnMSTPTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.28.3.1 |
ol53nnMSTPTrunkSlotIndexA unique value that identifies a particular module. Its
value ranges between 1 and olModSlotNumber. The module
identified by a particular value of this index is the same
module as indentified by the same value of
olTrunkSlotIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.28.3.1.1 |
ol53nnMSTPTrunkIndexA unique value that identifies a particular trunk within this
module. Its value ranges between 1 and olModTrunkNumber.
The module identified by a particular value of this index is
the same module as indentified by the same value of
olTrunkIndex.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.28.3.1.2 |
ol51nnMTPCL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.29 |
ol51nnMTPCLModTableA list of module-specific information about a specific
51nnM-TPCL module in the concentrator. SEQUENCE OF Ol51nnMTPCLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.29.1 |
ol51nnMTPCLModEntryA list of module-specific information about a specific
51nnM-TPCL module in the concentrator. Ol51nnMTPCLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1 |
ol51nnMTPCLModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.1 |
ol51nnMTPCLModMonitorConnWhen both connectors are on the same network:
Setting this object to connector-1 allows the EMM to
monitor the port statistics of port 1-12 on a per-port
basis, and the port statistics of port 13-24 are summed
and are reported through port 13.
Setting this object to connector-2 allows the EMM to
monitor the port statistics of port 12-24 on a per-port
basis, and the port statistics of port 1-12 are summed
and are reported through port 13.
Note: when the 2 connectors are on different networks,
setting this object to the value connector-1 or
connector-2 will not have any effect. The port counters
will be cleared whenever the value of this object is
changed.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.2 |
ol51nnMTPCLModConn1NetworkThe network that this connector is attached to.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.3 |
ol51nnMTPCLModConn2NetworkThe network that this connector is attached to.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.4 |
ol51nnMTPCLModConn1DipNetworkThe network indicated by the connector dip switch.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.5 |
ol51nnMTPCLModConn2DipNetworkThe network indicated by the connector dip switch.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.6 |
ol51nnMTPCLModAutoPartitionThis object holds the consecutive collision count
limit value. The module goes into the auto-partition
mode whenever the consecutive collision count exceeds
the consecutive collision limit count.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.1.1.7 |
ol51nnMTPCLPortTableA table of port-specific information for each port of
this module type. SEQUENCE OF Ol51nnMTPCLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.29.2 |
ol51nnMTPCLPortEntryA list of module-specific information about a specific
51nnM-TPCL port in the concentrator. Ol51nnMTPCLPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1 |
ol51nnMTPCLPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.1 |
ol51nnMTPCLPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.2 |
ol51nnMTPCLPortAdminStateThe desired state of this port. Setting this port to
be redundant or for remote diagnostics with invalid settings
of buddy slot and buddy port will return the genError error.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.3 |
ol51nnMTPCLPortBuddySlotThe slot index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.
If the port is configured for remote diagnostics, then
this contains the slot index of the backup buddy port.
To configure a port for remote diagnostics, the buddy's
slot and port must be set to valid values.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.4 |
ol51nnMTPCLPortBuddyPortThe port index of the redundant port's buddy. To set
a port to be redundant, the buddy's slot and port must
be set to valid values.
The buddy is automatically set to be redundant to this port.
If the port is configured for remote diagnostics, then
this contains the port index of the backup buddy port.
To configure a port for remote diagnostics, the buddy's
slot and port must be set to valid values.rw INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.5 |
ol51nnMTPCLPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.6 |
ol51nnMTPCLPortLinkIntegThe current link integrity configuration for this port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.7 |
ol51nnMTPCLPortDipLinkIntegThe link integrity configuration as indicated by this
dip switch.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.29.2.1.8 |
ol52nnBTT OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.30 |
ol52nnBTTModTableA table of module-specific information for each
52nnB-TT module in the concentrator. SEQUENCE OF Ol52nnBTTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.30.1 |
ol52nnBTTModEntryA list of module-specific information about a specific
52nnB-TT module in the concentrator. Ol52nnBTTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.30.1.1 |
ol52nnBTTModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.30.1.1.1 |
ol52nnBTTModBridgeTypeWhether the bridge is a source-routing bridge or a
source-routing-transparent bridge.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.30.1.1.2 |
ol52nnBTTModSoftwareVersionThe version number of the software loaded into the
module's flash chips.ro DisplayString .1.3.6.1.4.1.49.2.3.1.4.4.30.1.1.3 |
ol52nnBTTModSRBridgeNoThe module's source routing bridge number.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.30.1.1.4 |
ol52nnBTTModNetworkStatusThe status of the ring containing this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.30.1.1.5 |
ol52nnBTTPortTableA table of port-specific for each port of each
52nnB-TT module i the concentrator. SEQUENCE OF Ol52nnBTTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.30.2 |
ol52nnBTTPortEntryA list of port-specific information about a specific
52nnB-TT port in the concentrator. Ol52nnBTTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1 |
ol52nnBTTPortSlotIndexThe slot number for this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.1 |
ol52nnBTTPortIndexThe port number for this port within this slot.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.2 |
ol52nnBTTPortConnectorThe port connector. Notice that setting port connector
available only for the front pannel port.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.3 |
ol52nnBTTPortSTAPStateThe port connector. Notice that setting port connector
available only for the front pannel port.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.4 |
ol52nnBTTPortIpAddressThe IP address associated with this port.ro IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.5 |
ol52nnBTTPortMACAddressA 6 octet address that uniquely identifies this port.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.6 |
ol52nnBTTPortThroughputPort throughput measured in Kbytes per second.ro Gauge .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.7 |
ol52nnBTTPortForwardingPort forwarding rate measured in frames per second.ro Gauge .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.8 |
ol52nnBTTPortSRRingNoThe port's source routing ring number.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.9 |
ol52nnBTTPortRingSpeedThe ring's bandwidth.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.30.2.1.10 |
ol52nnBTTTrunkTableA table that contains trunk-specific information for
each trunk on each 52nnB-TT in the concentrator. SEQUENCE OF Ol52nnBTTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.30.3 |
ol52nnBTTTrunkEntryA list of information about a specific Trunk on a
52nnB-TT module in the concentrator. Ol52nnBTTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.30.3.1 |
ol52nnBTTTrunkSlotIndexThe slot number of this module. Its value ranges
between 1 and olConcNumSlots.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.30.3.1.1 |
ol52nnBTTTrunkIndexThe trunk number of this module. Its value ranges
between 1 and olModNumTrunks.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.30.3.1.2 |
ol51nnIx OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.31 |
ol51nnIxModTableA table of module-specific information for
each 51nnI-x module in the concentrator. SEQUENCE OF Ol51nnIxModEntry .1.3.6.1.4.1.49.2.3.1.4.4.31.1 |
ol51nnIxModEntryA list of module-specific information about a specific
51nnI-x module in the concentrator. Ol51nnIxModEntry .1.3.6.1.4.1.49.2.3.1.4.4.31.1.1 |
ol51nnIxModSlotIndexThe slot number of this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.31.1.1.1 |
ol51nnIxModSwTypeThe software currently loaded and executing has the
module operating as a Bridge, Switch or Router.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.31.1.1.2 |
ol51nnIxModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the mac address of port 1.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.31.1.1.3 |
ol51nnIxModDipPromDefaultsThe current module configuration with respect to
default PROM values as specified by dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.31.1.1.4 |
ol51nnIxModProtocolsA textual description of the protocols supported by
this modulero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.49.2.3.1.4.4.31.1.1.5 |
ol51nnIxPortTableA table of port-specific information for each port of
each 51nnI-x module in the concentrator. SEQUENCE OF Ol51nnIxPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.31.2 |
ol51nnIxPortEntryA list of port-specific information about a specific
51nnI-x port in the concentrator. Ol51nnIxPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1 |
ol51nnIxPortSlotIndexThe slot number for this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.1 |
ol51nnIxPortIndexThe port number for this port within this slot.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.2 |
ol51nnIxPortDipAdminStateThe state of this port as indicated by the port's dip
switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.3 |
ol51nnIxPortSTAPStateThe current IEEE 802.1d Spanning Tree Algorithm and Protocol
state (STAP) of this port.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.4 |
ol51nnIxPortIpAddressThe IP Address associated with this port.ro IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.5 |
ol51nnIxPortDipNetworkThe network for this port as specified by this port's
dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.6 |
ol51nnIxPortDefNetworkThe network for this port as specified by the OEIM's
non-volatile storage.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.31.2.1.7 |
ol52nnMMGT OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.32 |
ol52nnMMGTModTableA table that contains module information about
each 52nnM-MGT in the concentrator. SEQUENCE OF Ol52nnMMGTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.32.1 |
ol52nnMMGTModEntryA list of module information for each 52nnM-MGT
in the concentrator. Ol52nnMMGTModEntry .1.3.6.1.4.1.49.2.3.1.4.4.32.1.1 |
ol52nnMMGTModSlotIndexThe slot number of this module. Its value ranges
between 1 and olConcNumSlots.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.1 |
ol52nnMMGTModMasterPriorityThe mastership priority of this agent. Ten is the
highest and one is the lowest. Priority is only
used when an election occurs. Mastership is not
preemptive unless the reset mastership command is used.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.2 |
ol52nnMMGTModMasterStatusThe mastership status of this agent.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.3 |
ol52nnMMGTModStationAddrA 6 octet address that uniquely identifies this module.
The station address is the MAC address of port 1.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.4 |
ol52nnMMGTModRingSpeedThe ring's bandwidth.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.5 |
ol52nnMMGTModNetworkStatusThe status of the ring containing this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.32.1.1.6 |
ol52nnMMGTPortTableA table that contains port-specific information for
each port on each 52nnM-MGT in the concentrator. SEQUENCE OF Ol52nnMMGTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.32.2 |
ol52nnMMGTPortEntryA list of information about a specific port on a
52nnM-MGT module in the concentrator. Ol52nnMMGTPortEntry .1.3.6.1.4.1.49.2.3.1.4.4.32.2.1 |
ol52nnMMGTPortSlotIndexThe slot number of this port's module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.32.2.1.1 |
ol52nnMMGTPortIndexThe port number of this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.32.2.1.2 |
ol52nnMMGTPortIpAddressThe IP address associated with this port.rw IpAddress .1.3.6.1.4.1.49.2.3.1.4.4.32.2.1.3 |
ol52nnMMGTTrunkTableA table that contains trunk-specific information for
each trunk on each 52nnM-MGT in the concentrator. SEQUENCE OF Ol52nnMMGTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.32.3 |
ol52nnMMGTTrunkEntryA list of information about a specific Trunk on a
52nnM-MGT module in the concentrator. Ol52nnMMGTTrunkEntry .1.3.6.1.4.1.49.2.3.1.4.4.32.3.1 |
ol52nnMMGTTrunkSlotIndexThe slot number of this module. Its value ranges
between 1 and olConcNumSlots.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.32.3.1.1 |
ol52nnMMGTTrunkIndexThe slot number of this module. Its value ranges
between 1 and olModNumTrunks.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.32.3.1.2 |
ol52nnMMGTTrunkCableMonThe cable monitor configuration for this trunk.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.32.3.1.3 |
ol52nnMMGTTrunkNetMapStateThe map state of the copper ring-in trunk. This
should be set to external for ring-in trunks which
connect to external hubs. The mapping logic will not
operate on trunks which are set to external. This
prevents incorrect mapping which can occur when a
module in one hub detects the mapping signal from
another hub. This attribute only applies to copper
ring-in trunks.rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.32.3.1.4 |
ol52nnMMGTTrunkExtBcnRecoveryIndicates whether the trunk is connected to a
segment that will perform beacon recovery. This
should be set to exists(1) for trunks which connect
to hubs which perform beacon recovery. This attribute
is used to determine the fault domain when resolving a
beaconing condition.
The beacon recovery process will resolve beaconing on
trunks with this attribute set to nonExists(2) before
trunks with the attribute set to exists(1) are resolved.
For backplane trunks, setting to a value other than
notApplicable will return invalidData error. The
default value is nonExists(2).rw Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.32.3.1.5 |
ol50nnMHCTL OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.4.4.33 |
ol50nnMHCTLModTableA table that contains information about each 50nnM-HCTL
in the concentrator. SEQUENCE OF Ol50nnMHCTLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.33.1 |
ol50nnMHCTLModEntryA list of information for each 50nnM-HCTL module
in the concentrator. Ol50nnMHCTLModEntry .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1 |
ol50nnMHCTLModSlotIndexThe slot number for this module. The value should be 7.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.1 |
ol50nnMHCTLModOperStateThe operational state of the 50nnM-HCTL module. Specifically,
this is an indicator of whether the 50nnM-HCTL module is
providing clock signals to the backplane. An active 50nnM-HCTL
module provides clock signals to the backplane while a standby
50nnM-HCTL module does not. Note that only one 50nnM-HCTL
module will be active at any given time; all other 50nnM-HCTL/
50nnMRCTL modules in the concentrator will be in standby mode.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.2 |
ol50nnMHCTLModClockStatusThe current status of the on-board clocks on this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.3 |
ol50nnMHCTLModTempStatusThe temperature as detected by the probe on this module.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.4 |
ol50nnMHCTLModPDBStatusIndicates whether this 6-slot concentrator contains a power
distribution board that supports powersupply redundancy.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.5 |
ol50nnMHCTLModDipCh1ActColThe Ethernet channel 1 activity/collision LED configuration
as indicated by this module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.6 |
ol50nnMHCTLModDipCh2ActColThe Ethernet channel 2 activity/collision LED configuration
as indicated by this module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.7 |
ol50nnMHCTLModDipCh3ActColThe Ethernet channel 3 activity/collision LED configuration
as indicated by this module's dip switches.ro Enumeration .1.3.6.1.4.1.49.2.3.1.4.4.33.1.1.8 |
olModSummaryTableA table of condensed module information. SEQUENCE OF OlModSummaryEntry .1.3.6.1.4.1.49.2.3.1.4.5 |
olModSummaryEntryA summary of all the generic and value added information
associated with this module. OlModSummaryEntry .1.3.6.1.4.1.49.2.3.1.4.5.1 |
olModSummarySlotIndexThe slot number of this module that this summary
pertains to.ro INTEGER .1.3.6.1.4.1.49.2.3.1.4.5.1.1 |
olModSummaryInfoA summary of all information relating to this module in
condensed format. The condensed format is only as large
as needed to hence the largest value which usually is one
octet. The TCP port for the terminal server, however,
uses 4 octets.
The summary consists of a header, a module portion, a port
portion, and a trunk portion. Each portion consists of
generic information and module specific information.
For example, the module information consists of the
olModTable entry for this slot and the olSpecMods module
table information for this module type for this slot.
The header consists of the following octets:
Version of structure : 1
Number of octets in generic module
Number of octets in specific module
Number of octets in generic port
Number of octets in specific port
Number of octets in generic trunk
Number of octets in specific trunk
The format of the data portion is as follows:
Some of the olModTable:
olModType
olModClass
olModDescr
olModVersion
olModNetwork
olModNetworkType
olModStatus
olModNumPorts
olModNumTrunks
olSpecMods module table (for this module)
Not including slot number.
For each port:
Some of the olPortTable:
olPortType
olPortConnector
olPortStatus
olPortAdminState
olPortNetwork
olPortNetworkType
olSpecMods port table (for this port's module)
Not including slot and port number.
For each trunk:
Some of the olTrunkTable:
olTrunkType
olTrunkConnector
olTrunkStatus
olTrunkAdminState
olTrunkWrapState
olTrunkNeighbor
olSpecMods trunk table (for this trunk's module)
Not including slot and trunk number.
In all of the above, the index for all of these tables
is condensed out of the summary.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.4.5.1.2 |
olNets OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5 |
olNet OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5.1 |
olNetDPTableA table that contains information linking
physical backplane allocation to logical
networks. This information is useful:
(1) to determine the physical allocation
of networks on the backplane, and
(2) to determine the remaining capacity of
the backplane for future network growth.
Since unknown modules are managed via dip
switches, this is useful in order to set the
dips to the appropriate settings.
Ethernet is a bus architecture. Once a path is
allocated, all modules and ports can access that
path.
Token Ring and FDDI are ring architectures.
Each module on a ring requires a path. Therefore,
4 paths could be used to link 4 modules together
on one ring, or 2 modules on 2 separate rings.
It is possible to have a module allocated to
a ring (and thus a data path) without linking
to another module.
These rules can be used to determine the remaining
capacity for network growth. SEQUENCE OF OlNetDPEntry .1.3.6.1.4.1.49.2.3.1.5.1.1 |
olNetDPEntryA list of information about each data path in the
concentrator. OlNetDPEntry .1.3.6.1.4.1.49.2.3.1.5.1.1.1 |
olNetDPDataPathThe data path on the backplane. Data paths between
different protocols overlap. That is, an ethernet data
path will overlap with multiple token ring and fddi data
paths.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.1.1.1.1 |
olNetDPNetIDThe network that this data path corresponds to.
If the data path is not being used at all, notUsed(1)
is the return value. If the data path is being used
by another protocol, then otherProto(2) is the
return value.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.1.1.1.2 |
olNetSecurityMACTableA table of security configuration parameters and MAC
addresses associated with every port with security
configured in the concentrator. SEQUENCE OF OlNetSecurityMACEntry .1.3.6.1.4.1.49.2.3.1.5.1.2 |
olNetSecurityMACEntryA list of security configuration parameters and MAC
addresses associated with each port with security
configured in the concentrator. OlNetSecurityMACEntry .1.3.6.1.4.1.49.2.3.1.5.1.2.1 |
olNetSecurityMACSlotIndexThe slot number that contains this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.1.2.1.1 |
olNetSecurityMACPortIndexThe port number within this slot.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.1.2.1.2 |
olNetSecurityMACAddressThe security MAC address assigned to this port.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.49.2.3.1.5.1.2.1.3 |
olNetSecurityMACModeThe desired security mode for this port/address.rw Enumeration .1.3.6.1.4.1.49.2.3.1.5.1.2.1.4 |
olNetSecurityMACStatusEach instance of the olNetSecurityMACTable associated
with this olNetSecurityMACEntry (slot, port, and address)
will be deleted by the agent if this olNetSecurityMACEntry
is not equal to valid(1). Initial creation of instances
occurs via a set operation on a specific slot/port/address.rw Enumeration .1.3.6.1.4.1.49.2.3.1.5.1.2.1.5 |
olEnet OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5.2 |
olEnetStatsTableA table that contains statistical information about
Ethernet (IEEE 802.3) networks. SEQUENCE OF OlEnetStatsEntry .1.3.6.1.4.1.49.2.3.1.5.2.1 |
olEnetStatsEntryA list of statistical information about each Ethernet
(IEEE 802.3) network in the concentrator. OlEnetStatsEntry .1.3.6.1.4.1.49.2.3.1.5.2.1.1 |
olEnetStatsNetIDThe network index that uniquely identifies this network.
One of ethernet-1, ethernet-2, or ethernet-3.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.2.1.1.1 |
olEnetStatsFramesRcvdOksThe count of frames that were successfully received by this
network. This counter does not include frames received
in error.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.1.1.2 |
olEnetStatsOctetsRcvdOksThe count of the number of octets that were successfully
received by this network. This counter does not include
octets that were part of frames that were received in error.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.1.1.3 |
olEnetStatsMcastRcvdOksThe count of the number of multicast frames successfully
received by this network.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.1.1.4 |
olEnetStatsBcastRcvdOksThe count of the number of broadcast frames successfully
received by this network.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.1.1.5 |
olEnetStatsFrameTooLongsThe count of the number of frames received by this network
that exceeds the maximum permitted Ethernet (802.3) frame
size.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.1.1.6 |
olEnetStatsAlignmentErrorsThe count of the number of frames received by this network
that did not pass the frame check sequence (FCS) check
and that are not an integral number of octets. These
frames are not counted in olEnetStatsFCSErrors.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.1.1.7 |
olEnetStatsFCSErrorsThe count of the number of frames received by this network
that did not pass the frame check sequence (FCS) check
and are an integral number of octets.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.1.1.8 |
olEnetStatsRuntsThe count of the number of frames received by this network
that are less than 512 bits long.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.1.1.9 |
olEnetStatsLocalCollsThe count of the number of times that two or more ports
within this concentrator have received traffic simultaneously.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.1.1.10 |
olEnetStatsModTableA table of statistical information counted for each module
in each Ethernet (IEEE 802.3) network. SEQUENCE OF OlEnetStatsModEntry .1.3.6.1.4.1.49.2.3.1.5.2.2 |
olEnetStatsModEntryA list of statistical information for each port
on each Ethernet (IEEE 802.3) network in the concentrator. OlEnetStatsModEntry .1.3.6.1.4.1.49.2.3.1.5.2.2.1 |
olEnetStatsModNetIDThe unique identifier for this network.
One of ethernet-1, ethernet-2, or ethernet-3.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.2.2.1.1 |
olEnetStatsModSlotIndexThe slot number that contains this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.2.2.1.2 |
olEnetStatsModFramesRcvdOksThe count of frames that were successfully received by this
module. This counter does not include frames received in
error.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.2.1.3 |
olEnetStatsModOctetsRcvdOksThe count of the number of octets that were successfully
received by this module. This counter does not include
octets that were part of frames that were received in error.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.2.1.4 |
olEnetStatsModMcastRcvdOksThe count of the number of multicast frames successfully
received by this module.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.2.1.5 |
olEnetStatsModBcastRcvdOksThe count of the number of broadcast frames successfully
received by this module.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.2.1.6 |
olEnetStatsModFrameTooLongsThe count of the number of frames received by this module
that exceeds the maximum permitted Ethernet (802.3) frame
size.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.2.1.7 |
olEnetStatsModAlignmentErrorsThe count of the number of frames received by this module
that did not pass the frame check sequence (FCS) check
and that are not an integral number of octets. These
frames are not counted in olEnetStatsModFCSErrors.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.2.1.8 |
olEnetStatsModFCSErrorsThe count of the number of frames received by this module
that did not pass the frame check sequence (FCS) check
and are an integral number of octets.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.2.1.9 |
olEnetStatsModRuntsThe count of the number of frames received by
this module that are less than 512 bits long.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.2.1.10 |
olEnetStatsPortTableA table of statistical information counted for each port
in each Ethernet (IEEE 802.3) network. SEQUENCE OF OlEnetStatsPortEntry .1.3.6.1.4.1.49.2.3.1.5.2.3 |
olEnetStatsPortEntryA list of statistical information for each port
on each Ethernet (IEEE 802.3) network in the concentrator. OlEnetStatsPortEntry .1.3.6.1.4.1.49.2.3.1.5.2.3.1 |
olEnetStatsPortNetIDThe unique identifier for this network.
One of ethernet-1, ethernet-2, or ethernet-3.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.2.3.1.1 |
olEnetStatsPortSlotIndexThe slot number that contains this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.2.3.1.2 |
olEnetStatsPortIndexThe port number within this slot.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.2.3.1.3 |
olEnetStatsPortFramesRcvdOksThe count of frames that were successfully received by this
port. This counter does not include frames received in error.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.3.1.4 |
olEnetStatsPortOctetsRcvdOksThe count of the number of octets that were successfully
received by this port. This counter does not include
octets that were part of frames that were received in error.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.3.1.5 |
olEnetStatsPortMcastRcvdOksThe count of the number of multicast frames successfully
received by this port.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.3.1.6 |
olEnetStatsPortBcastRcvdOksThe count of the number of broadcast frames successfully
received by this port.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.3.1.7 |
olEnetStatsPortFrameTooLongsThe count of the number of frames received by this port
that exceeds the maximum permitted Ethernet (802.3) frame
size.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.3.1.8 |
olEnetStatsPortAlignmentErrorsThe count of the number of frames received by this port
that did not pass the frame check sequence (FCS) check
and that are not an integral number of octets. These
frames are not counted in olEnetStatsPortFCSErrors.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.3.1.9 |
olEnetStatsPortFCSErrorsThe count of the number of frames received by this port
that did not pass the frame check sequence (FCS) check
and are an integral number of octets.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.3.1.10 |
olEnetStatsPortRuntsThe count of the number of frames received by this port that
are less than 512 bits long.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.3.1.11 |
olEnetStatsPortSrcAddrChangesThe count of the number of times that
olEnetStatsPortLastSourceAddr
{ olEnetStatsPortEntry 11 } has changed.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.3.1.12 |
olEnetStatsPortLastSrcAddrThe last source address seen on this port for this
network for the last successfully received frame.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.5.2.3.1.13 |
olEnetStatsPortLastErrAddrThe value stored in the source address portion of
a frame received in error (alignment, FCS, or too long).
Since the frame was received in error, there is no
guarantee that this is an actual valid address.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.5.2.3.1.14 |
olEnetMapTableA table that contains a cache of information relating
an Ethernet source address with a specific port for
a given network. An indication of this source's utilization
of the network is also provided. SEQUENCE OF OlEnetMapEntry .1.3.6.1.4.1.49.2.3.1.5.2.4 |
olEnetMapEntryA list of information that tracks a source address to
a specific port for each network. OlEnetMapEntry .1.3.6.1.4.1.49.2.3.1.5.2.4.1 |
olEnetMapNetIDThe network index that uniquely identifies this network.
One of ethernet-1, ethernet-2, ethernet-3.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.2.4.1.1 |
olEnetMapAddressAn Ethernet source address received by this port on this
network.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.5.2.4.1.2 |
olEnetMapSlotIndexThe slot number of the port that received this address.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.2.4.1.3 |
olEnetMapPortIndexThe port number within olEnetMapSlotIndex's slot that
received this address.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.2.4.1.4 |
olEnetMapFramesAn estimated count of the number of frames generated by this
address. This count should be interpreted as an
indicator, not a true frame count.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.4.1.5 |
olEnetMapOctetsAn estimated count of the number of octets generated by this
address. This count should be interpreted as an
indicator, not a true octet count.ro Counter .1.3.6.1.4.1.49.2.3.1.5.2.4.1.6 |
olEnetMapTimeThe time in in hundredths of a second since this address
was last seen. For example, if olEnetMapTime is 500
ticks, then this adddress was seen 5 seconds ago.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.49.2.3.1.5.2.4.1.7 |
olTRnet OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5.3 |
olTRnetMapStateThe state of the inter-module token ring map. If the map
is being updated, then the state of the map is changing.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.1 |
olTRnetStatsTableA list of Token Ring statistics entries counted
for each network. SEQUENCE OF OlTRnetStatsEntry .1.3.6.1.4.1.49.2.3.1.5.3.2 |
olTRnetStatsEntryA collection of statistics kept for a particular
Token Ring interface. OlTRnetStatsEntry .1.3.6.1.4.1.49.2.3.1.5.3.2.1 |
olTRnetStatsNetIDThe network index that uniquely identifies this network.
One of token-ring-1 through token-ring-7 or isolated.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.2.1.1 |
olTRnetStatsLineErrorsThe total number of line errors reported in
error reporting packets detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.2.1.2 |
olTRnetStatsBurstErrorsThe total number of burst errors reported in
error reporting packets detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.2.1.3 |
olTRnetStatsACErrorsThe total number of AC (Address Copied) errors
reported in error reporting packets detected by
the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.2.1.4 |
olTRnetStatsLostFrameErrorsThe total number of lost frame errors reported
in error reporting packets detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.2.1.5 |
olTRnetStatsCongestionErrorsThe total number of receive congestion errors
reported in error reporting packets detected by
the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.2.1.6 |
olTRnetStatsFrameCopiedErrorsThe total number of frame copied errors
reported in error reporting packets detected by
the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.2.1.7 |
olTRnetStatsTokenErrorsThe total number of token errors reported in
error reporting packets detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.2.1.8 |
olTRnetStatsDuplicateAddressesThe total number of token errors reported in
error reporting packets detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.2.1.9 |
olTRnetStatsBeaconEventsThe total number of times that the ring enters
the beaconing state.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.2.1.10 |
olTRnetStatsLastBeaconSenderThe address of the sender of the last beacon frame
received on this ring. If no beacon frames have been
received, this object will be six zero octets.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.5.3.2.1.11 |
olTRnetStatsLastBeaconNAUNThe address of the NAUN in the last beacon frame
received on this ring. If no beacon frames have been
received, this object will be six zero octets.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.5.3.2.1.12 |
olTRnetStatsLastBeaconTimeThe time in in hundredths of a second since the last
beacon event occurred. For example, if the time is 500
ticks, then this event was seen 5 seconds ago. If no
beacon events have occurred, then this will be equal
to the sysUpTime.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.49.2.3.1.5.3.2.1.13 |
olTRnetStatsLastBeaconActionThe action (if any) taken to correct the last beacon
event on the ring.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.2.1.14 |
olTRnetStatsTotalStationsThe number of stations currently participating in the 802.5
MAC protocol on the ring.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.2.1.15 |
olTRnetStatsConcStationsThe number of stations currently participating in the 802.5
MAC protocol on the ring which are connected to ports in
this concentrator.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.2.1.16 |
olTRnetStatsTotalPortsThe total number of ports within this concentrator and
on this ring regardless of their admin state or status.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.2.1.17 |
olTRnetStatsEnabledPortsThe number of ports within this concentrator and on this ring
which have olPortAdminState set to enabled.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.2.1.18 |
olTRnetStatsActivePortsThe number of ports within this concentrator and on this ring
which have olPortAdminState set to enabled and whose
olPortStatus has a status of okay.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.2.1.19 |
olTRnetStatsStationTableA list of ring statistics entries. SEQUENCE OF OlTRnetStatsStationEntry .1.3.6.1.4.1.49.2.3.1.5.3.3 |
olTRnetStatsStationEntryA collection of statistics for a particular station
that has been discovered on a a ring monitored by
this device. OlTRnetStatsStationEntry .1.3.6.1.4.1.49.2.3.1.5.3.3.1 |
olTRnetStatsStationNetIDThe network index that uniquely identifies this network.
One of token-ring-1 through token-ring-7 or isolated.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.3.1.1 |
olTRnetStatsStationAddrThe physical address of this station.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.5.3.3.1.2 |
olTRnetStatsStationSlotIndexThe slot number of the station with this address.
Addresses with a slot value of external(255) are
not in this concentrator.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.3.1.3 |
olTRnetStatsStationPortIndexThe port number within olTRnetStatsStationSlotIndex's
slot that received this address. If
olTRnetStatsStationSlotIndex has a value of
external(255), then the port address will be 255.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.3.1.4 |
olTRnetStatsStationNAUNAddressThe physical address of the nearest active upstream
neighbor of this station.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.5.3.3.1.5 |
olTRnetStatsStationLineErrorsThe total number of Line Errors pertaining to this station
reported in error reporting packets detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.3.1.6 |
olTRnetStatsStationBurstErrorsThe total number of burst errors pertaining to this station
reported in error reporting packets detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.3.1.7 |
olTRnetStatsStationACErrorsThe total number of AC (Address Copied)
errors pertaining to this station reported in
error reporting packets detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.3.1.8 |
olTRnetStatsStationLostFrameErrorsThe total number of lost frame errors pertaining to
this station reported in error reporting packets
detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.3.1.9 |
olTRnetStatsStationCongestionErrorsThe total number of congestion errors pertaining
to this station reported in error reporting
packets detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.3.1.10 |
olTRnetStatsStationFrameCopiedErrorsThe total number of frame copied errors pertaining
to this station reported in error reporting packets
detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.3.1.11 |
olTRnetStatsStationTokenErrorsThe total number of token errors pertaining to this
station reported in error reporting packets detected
by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.3.1.12 |
olTRnetStatsStationDuplicateAddressesThe number of times this station experienced
a duplicate address error.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.3.1.13 |
olTRnetStatsPortTableA list of statistic entries, for ports within the
concentrator. SEQUENCE OF OlTRnetStatsPortEntry .1.3.6.1.4.1.49.2.3.1.5.3.4 |
olTRnetStatsPortEntryA collection of statistics for a particular station
that has been discovered on a a ring monitored by
this device. OlTRnetStatsPortEntry .1.3.6.1.4.1.49.2.3.1.5.3.4.1 |
olTRnetStatsPortSlotIndexThe port slot number.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.4.1.1 |
olTRnetStatsPortIndexThe port number within olTRnetStatsPortSlotIndex's slot.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.4.1.2 |
olTRnetStatsPortNetIDThe network index that uniquely identifies this network.
One of token-ring-1 through token-ring-7 or isolated.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.4.1.3 |
olTRnetStatsPortTotalStationsThe total number of stations attached to this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.4.1.4 |
olTRnetStatsPortAddressThe mac address of the station connected to this
If there are multiple mac addresses for this port,
then this object will contain the last mac address.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.5.3.4.1.5 |
olTRnetStatsPortLineErrorsThe total number of Line Errors pertaining to
this port reported in error reporting
packets detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.4.1.6 |
olTRnetStatsPortBurstErrorsThe total number of burst errors pertaining
to this port reported in error reporting
packets detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.4.1.7 |
olTRnetStatsPortACErrorsThe total number of AC (Address Copied)
errors pertaining to this port reported in
error reporting packets detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.4.1.8 |
olTRnetStatsPortLostFrameErrorsThe total number of lost frame errors pertaining to
this port reported in error reporting packets
detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.4.1.9 |
olTRnetStatsPortCongestionErrorsThe total number of congestion errors pertaining
to this port reported in error reporting
packets detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.4.1.10 |
olTRnetStatsPortFrameCopiedErrorsThe total number of frame copied errors pertaining
to this port reported in error reporting packets
detected by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.4.1.11 |
olTRnetStatsPortTokenErrorsThe total number of token errors pertaining to this
station reported in error reporting packets detected
by the TRMM.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.4.1.12 |
olTRnetStatsPortDuplicateAddressesThe number of times this port experienced
a duplicate address error.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.4.1.13 |
olTRnetMapSummary OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5.3.5 |
olTRnetMapSummaryLogicalStateThe state of the token ring summary table. If the summary
is being updated, then the state of the summary is changing.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.5.1 |
olTRnetMapSummaryLogicalLockA semaphore for locking the token ring summary table.
When locked, updates to the summary will pend until the
semaphore is unlocked, so that a valid summary can be read.
This cannot be set to unlock if olTRnetSummaryLogicalState is
changing.
For complete accuracy, this should be read after being set to
ensure that the map was not changing when the lock was
attempted. After the summary information has been recorded,
the semaphore should be set to unlock to allow changes to
occur.rw Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.5.2 |
olTRnetMapSummaryTableA logical map of the token ring network, starting from the
agent's specified token ring interface. Each station on the
map is represented by it's MAC address, slot number and port
number (8 octets per station). If the port is external
to the concentrator, the slot number will be 255 and the
port number will be 0. The map is ordered in the same
direction as the token flow. The MAC addresses
are concatonated into groups of up to 32 addresses per entry.
The last entry has all-zero MAC addresses padded on the end
of the entry. All entries before the last one have 32 valid
addresses. This table supports up to 256 stations. SEQUENCE OF OlTRnetMapSummaryEntry .1.3.6.1.4.1.49.2.3.1.5.3.5.3 |
olTRnetMapSummaryEntryA group of MAC addresses associated with a Token Ring map. OlTRnetMapSummaryEntry .1.3.6.1.4.1.49.2.3.1.5.3.5.3.1 |
olTRnetMapSummaryNetIDThe network index that uniquely identifies this network.
It can be isolated from the backplane, or on one of seven
possible backplane token ring networks.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.5.3.1.1 |
olTRnetMapSummaryIndexThe index into the map array. Possible values are 1 through 8.
The MAC address of this agent is the first MAC address in
olTRnetMapSummary32Stations indexed by a 1 in this entry.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.5.3.1.2 |
olTRnetMapSummary32StationsA concatonated group of MAC addresses and their associated
slot and port of stations on the ring. Each entry has the
eight octets. The first six octets are the MAC address.
The seventh octet is the slot ID (or 255 if it is external
to the concentrator). The eighth is the port ID (or 255
if it is external to the concentrator).
The MAC addresses are in the same order as the token flow.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.5.3.5.3.1.3 |
olTRTrafTableA list of Token Ring network traffic (non-error) statistics entries.
Note that all of the frame and octet counters in this table
include error frames that have valid length;
all octet counters exclude framing bits but include FCS octets. SEQUENCE OF OlTRTrafEntry .1.3.6.1.4.1.49.2.3.1.5.3.6 |
olTRTrafEntryA collection of statistics kept for a particular
Token Ring interface.
Note that all of the frame and octet counters in this table
include error frames that have valid length;
all octet counters exclude framing bits but include FCS octets. OlTRTrafEntry .1.3.6.1.4.1.49.2.3.1.5.3.6.1 |
olTRTrafNetIDThe network index that uniquely identifies this network.
One of token-ring-1 through token-ring-7 or isolated.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.6.1.1 |
olTRTrafTokenRotationTimeAn estimate of the time (in microseconds) that it takes for the
token to complete a single rotation around the ring.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.6.1.2 |
olTRTrafDropEventsThe total number of events in which frames
were dropped by the TRMM due to lack of resources.
Note that this number is not necessarily the number of
frames dropped; it is just the number of times this
condition has been detected.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.3 |
olTRTrafOctetsThe total number of octets of data received on the network.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.4 |
olTRTrafFramesThe total number of frames received.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.5 |
olTRTrafMacOctetsThe total number of octets of data in MAC frames
received on the network.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.6 |
olTRTrafMacFramesThe total number of MAC frames received.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.7 |
olTRTrafBroadcastFramesThe total number of non-MAC frames received that were
directed to a broadcast address (0xFFFFFFFFFFFF or 0xC000FFFFFFFF).ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.8 |
olTRTrafMulticastFramesThe total number of non-MAC frames received that were
directed to a local or global multicast or functional address.
Note that this number does not include frames directed to
a broadcast address.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.9 |
olTRTrafFrames18to63OctetsThe total number of non-MAC frames received that were between
18 and 63 octets in length inclusive.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.10 |
olTRTrafFrames64to127OctetsThe total number of non-MAC frames received that were between
64 and 127 octets in length inclusive.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.11 |
olTRTrafFrames128to255OctetsThe total number of non-MAC frames received that were between
128 and 255 octets in length inclusive.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.12 |
olTRTrafFrames256to511OctetsThe total number of non-MAC frames received that were between
256 and 511 octets in length inclusive.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.13 |
olTRTrafFrames512to1023OctetsThe total number of non-MAC frames received that were between
512 and 1023 octets in length inclusive.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.14 |
olTRTrafFrames1024to2047OctetsThe total number of non-MAC frames received that were between
1024 and 2047 octets in length inclusive.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.15 |
olTRTrafFrames2048to4095OctetsThe total number of non-MAC frames received that were between
2048 and 4095 octets in length inclusive.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.16 |
olTRTrafFrames4096to8191OctetsThe total number of non-MAC frames received that were between
4096 and 8191 octets in length inclusive.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.17 |
olTRTrafFrames8192to18000OctetsThe total number of non-MAC frames received that were between
8192 and 18000 octets in length inclusive.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.18 |
olTRTrafFramesGreaterThan18000OctetsThe total number of non-MAC frames received that were
greater than or equal to 18000 octets in length.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.6.1.19 |
olTRTrafControlTableA list entries containing information about
olTRTrafStationTable, olTRTrafPortTable, olTRTrafTopNTable, and
olTRTrafTopNSummaryTable SEQUENCE OF OlTRTrafControlEntry .1.3.6.1.4.1.49.2.3.1.5.3.7 |
olTRTrafControlEntryA collection of information about
olTRTrafStationTable, olTRTrafPortTable, olTRTrafTopNTable, and
olTRTrafTopNSummaryTable OlTRTrafControlEntry .1.3.6.1.4.1.49.2.3.1.5.3.7.1 |
olTRTrafControlNetIDThe network index that uniquely identifies this network.
One of token-ring-1 through token-ring-7 or isolated.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.7.1.1 |
olTRTrafControlLogicalStateThe state of the token ring station traffic tables:
olTRTrafStationTable, olTRTrafPortTable, olTRTrafTopNTable
and olTRTrafTopNSummaryTable. If any of the tables associated
with this olTRTrafControlEntry are being updated,
then the state is changing(1).ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.7.1.2 |
olTRTrafControlLogicalLockA semaphore for locking the token ring station traffic
tables: olTRTrafStationTable, olTRTrafPortTable,
olTRTrafTopNTable, and olTRTrafTopNSummaryTable.
When the semaphore is locked, adds, deletes, and re-sorting
the traffic tables associated with this
olTRTrafControlEntry will pend until the
semaphore is unlocked, so that a valid set of entries
can be read. Note that the normal incrementing of the traffic
counters are not affected by the setting of this semaphore.
This cannot be set to unlock if olTRTrafControlLogicalState is
changing.
For complete accuracy, this semaphore
should be read after being set to
ensure that the tables were not changing when the lock was
attempted. After the table information has been recorded,
the semaphore should be set to unlock to allow changes to
occur.rw Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.7.1.3 |
olTRTrafControlClearWhen the value of this object is set to clear,
all entries in the token ring station traffic
tables (olTRTrafStationTable, olTRTrafPortTable,
olTRTrafTopNTable, and olTRTrafTopNSummaryTable) are cleared.rw Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.7.1.4 |
olTRTrafControlLastClearTimeThe value of sysUpTime when the token ring station traffic
tables (olTRTrafStationTable, olTRTrafPortTable,
olTRTrafTopNTable and olTRTrafTopNSummaryTable) were cleared.
If never cleared, this value shall be zero (and the token ring
station traffic tables will contain information collected since
the XMM was started up).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.49.2.3.1.5.3.7.1.5 |
olTRTrafControlTotalStationsThe number of stations in the portion of the olTRTrafStationTable
associated with this olTRTrafControlEntry.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.7.1.6 |
olTRTrafControlStationLastChangeTimeThe value of sysUpTime when the last entry
was added to or deleted (or re-sorted)
from the portion of the olTRTrafStationTable
associated with this olTRTrafControlEntry. If no
additions or deletions have occurred, this value shall be zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.49.2.3.1.5.3.7.1.7 |
olTRTrafControlPortTotalStationsThe number of stations in the portion of the olTRTrafPortTable
associated with this olTRTrafControlEntry.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.7.1.8 |
olTRTrafControlPortLastChangeTimeThe value of sysUpTime when the last entry
was added to or deleted (or re-sorted)
from the portion of the olTRTrafPortTable
associated with this olTRTrafControlEntry. If no
additions or deletions have occurred, this value shall be zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.49.2.3.1.5.3.7.1.9 |
olTRTrafControlTopNMaxStationsSpecifies a maximum value for olTRTrafControlTopNTotalStations
in this olTRTrafControlEntry. If this value is zero then no
maximum value for olTRTrafControlTopNTotalStations is specified.rw INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.7.1.10 |
olTRTrafControlTopNTotalStationsThe number of stations (for each statistic) in the portion of
the olTRTrafTopNTable and olTRTrafTopNSummaryTable associated
with this olTRTrafControlEntry. If olTRTrafControlTopNMaxStations
is zero or is not less than olTRTrafControlTotalStations then
olTRTrafControlTopNTotalStations will have the same value as
olTRTrafControlTotalStations. Otherwise
olTRTrafControlTopNTotalStations will
have the same value as olTRTrafControlTopNMaxStations.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.7.1.11 |
olTRTrafControlTopNLastChangeTimeThe value of sysUpTime when the last entry
was added to or deleted (or re-sorted)
from the portion of the olTRTrafTopNTable and olTRTrafTopNSummaryTable
associated with this olTRTrafControlEntry.
This is equivalent to the time when
the last TopN data collection period ended.
If no additions or deletions have occurred, this value shall be zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.49.2.3.1.5.3.7.1.12 |
olTRTrafControlTopNIntervalSpecifies the length of the TopN data collection period in seconds.
Minimum length is 5 seconds; maximum is 86400 seconds (24 hours).
When this value is modified, all associated entries in
olTRTrafTopNTable and olTRTrafTopNSummaryTable are deleted and a new
TopN data collection period is started.rw INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.7.1.13 |
olTRTrafStationTableA list of Token Ring station traffic statistics entries
indexed by Network ID and MAC address. The table has
olTRTrafTotalStations entries.
Note that all of the frame and octet counters in this table
include error frames that have valid length;
all octet counters exclude framing bits but include FCS octets. SEQUENCE OF OlTRTrafStationEntry .1.3.6.1.4.1.49.2.3.1.5.3.8 |
olTRTrafStationEntryA collection of station statistics for a particular station
that has been discovered on an interface of this
device.
Note that all of the frame and octet counters in this table
include error frames that have valid length;
all octet counters exclude framing bits but include FCS octets. OlTRTrafStationEntry .1.3.6.1.4.1.49.2.3.1.5.3.8.1 |
olTRTrafStationNetIDThe network index that uniquely identifies this network.
One of token-ring-1 through token-ring-7 or isolated.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.8.1.1 |
olTRTrafStationAddressThe physical address of this station.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.49.2.3.1.5.3.8.1.2 |
olTRTrafStationSlotIndexThe slot number of the station with this address.
Addresses with a slot value of remote-ring(254) are
not in this ring.
Addresses with a slot value of external(255) are
not in this concentrator.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.8.1.3 |
olTRTrafStationPortIndexThe port number within olTRTrafSlotIndex's
slot that received this address.
If olTRTrafSlotIndex has a value of
remote-ring(254), then the port address will be 254.
If olTRTrafSlotIndex has a value of
external(255), then the port address will be 255.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.8.1.4 |
olTRTrafStationInFramesThe number of frames transmitted to this address since it was
added to this table.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.8.1.5 |
olTRTrafStationOutFramesThe number of frames transmitted by this address since it was
added to this table.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.8.1.6 |
olTRTrafStationInOctetsThe number of octets transmitted to this address since it was
added to this table.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.8.1.7 |
olTRTrafStationOutOctetsThe number of octets transmitted by this address since it was
added to this table.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.8.1.8 |
olTRTrafStationOutErrorsThe number of error frames transmitted by this
address since it was added to this table. Only isolating errors
(LineErrors, BurstErrors, ACErrors, InternalErrors, and AbortErrors)
and CongestionErrors are counted.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.8.1.9 |
olTRTrafStationOutBroadcastFramesThe number of frames transmitted by this address
that were directed to the broadcast address since it was
added to this table.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.8.1.10 |
olTRTrafStationOutMulticastFramesThe number of frames transmitted by this address
that were directed to a multicast address since it was
added to this table.
Note that this number does not include frames
directed to the broadcast address.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.8.1.11 |
olTRTrafPortTableA list of Token Ring station traffic statistics entries
indexed by slot number, and port number. Note that stations external
to this concentrator or on another ring are excluded from this table.
Note that all of the frame and octet counters in this table
include error frames that have valid length;
all octet counters exclude framing bits but include FCS octets. SEQUENCE OF OlTRTrafPortEntry .1.3.6.1.4.1.49.2.3.1.5.3.9 |
olTRTrafPortEntryA collection of station statistics for a particular station
that has been discovered on an interface of this
device.
Note that all of the frame and octet counters in this table
include error frames that have valid length;
all octet counters exclude framing bits but include FCS octets.
include error frames; all octet counters exclude framing bits
but include FCS octets. OlTRTrafPortEntry .1.3.6.1.4.1.49.2.3.1.5.3.9.1 |
olTRTrafPortSlotIndexThe slot number of the station with this address.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.9.1.1 |
olTRTrafPortPortIndexThe port number within olTRTrafPortSlotIndex's
slot that received this address.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.9.1.2 |
olTRTrafPortNetIDThe network index that uniquely identifies this network.
One of token-ring-1 through token-ring-7 or isolated.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.9.1.3 |
olTRTrafPortAddressThe physical address of this station.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.49.2.3.1.5.3.9.1.4 |
olTRTrafPortInFramesThe number of frames transmitted to this address since it was
added to this table.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.9.1.5 |
olTRTrafPortOutFramesThe number of frames transmitted by this address since it was
added to this table.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.9.1.6 |
olTRTrafPortInOctetsThe number of octets transmitted to this address since it was
added to this table.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.9.1.7 |
olTRTrafPortOutOctetsThe number of octets transmitted by this address since it was
added to this table.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.9.1.8 |
olTRTrafPortOutErrorsThe number of error frames transmitted by this
address since it was added to this table. Only isolating errors
(LineErrors, BurstErrors, ACErrors, InternalErrors, and AbortErrors)
and CongestionErrors are counted.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.9.1.9 |
olTRTrafPortOutBroadcastFramesThe number of frames transmitted by this address
that were directed to the broadcast address since it was
added to this table.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.9.1.10 |
olTRTrafPortOutMulticastFramesThe number of frames transmitted by this address
that were directed to a multicast address since it was
added to this table.
Note that this number does not include frames
directed to the broadcast address.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.9.1.11 |
olTRTrafTopNTableA list of Token Ring station traffic statistics entries indexed by
olTRTrafTopNNetID, olTRTrafTopNStatistic, and olTRTrafTopNIndex.
For each Network, the list contains 7 logical sublists - one for
each statistic.
Each of the sublists has olTRTrafControlTopNTotalStations entries.
For eack Network, the table has 7 times
olTRTrafTopNControlTotalStations entries.
All of the counters in this table reflect activity during the last
completed TopN data collection period
(olTRTrafControlTopNInterval seconds).
Note that this table will contain no entries
if a TopN data collection period has not yet completed since
olTRTrafControlTopNInterval was modified or since startup.
Note that all of the frame and octet counters in this table
include error frames that have valid length;
all octet counters exclude framing bits but include FCS octets. SEQUENCE OF OlTRTrafTopNEntry .1.3.6.1.4.1.49.2.3.1.5.3.10 |
olTRTrafTopNEntryA collection of station statistics for a particular station
that has been discovered on an interface of this
device.
Note that all of the frame and octet counters in this table
include error frames that have valid length;
all octet counters exclude framing bits but include FCS octets. OlTRTrafTopNEntry .1.3.6.1.4.1.49.2.3.1.5.3.10.1 |
olTRTrafTopNNetIDThe network index that uniquely identifies this network.
One of token-ring-1 through token-ring-7 or isolated.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.10.1.1 |
olTRTrafTopNStatisticThe object representing the statistic for each station that this
portion of the olTRTrafTopNTable is sorted on.rw Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.10.1.2 |
olTRTrafTopNIndexAn index that uniquely identifies an entry in
the olTRTrafTopN table among those in the same network
and for the same olTRTrafTopNStatistic.
This index is between 1 and N, where N is the value of
olTRTrafControlTopNTotalStations. Increasing values
of olTRTrafTopNIndex shall be assigned to entries with
decreasing values of the object referenced by olTRTrafTopNStatistic.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.10.1.3 |
olTRTrafTopNAddressThe physical address of this station.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.49.2.3.1.5.3.10.1.4 |
olTRTrafTopNSlotIndexThe slot number of the station with this address.
Addresses with a slot value of remote-ring(254) are
not in this ring.
Addresses with a slot value of external(255) are
not in this concentrator.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.10.1.5 |
olTRTrafTopNPortIndexThe port number within olTRTrafTopNSlotIndex's
slot that received this address.
If olTRTrafTopNSlotIndex has a value of
remote-ring(254), then the port address will be 254.
If olTRTrafTopNSlotIndex has a value of
external(255), then the port address will be 255.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.10.1.6 |
olTRTrafTopNInFramesThe number of frames transmitted to this address
during the last TopN data collection period.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.10.1.7 |
olTRTrafTopNOutFramesThe number of frames transmitted by this address
during the last TopN data collection period.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.10.1.8 |
olTRTrafTopNInOctetsThe number of octets transmitted to this address
during the last TopN data collection period.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.10.1.9 |
olTRTrafTopNOutOctetsThe number of octets transmitted by this address
during the last TopN data collection period.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.10.1.10 |
olTRTrafTopNOutErrorsThe number of error frames transmitted by this address
during the last TopN data collection period. Only isolating errors
(LineErrors, BurstErrors, ACErrors, InternalErrors, and AbortErrors)
and CongestionErrors are counted.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.10.1.11 |
olTRTrafTopNOutBroadcastFramesThe number of frames transmitted by this address
that were directed to the broadcast address
during the last TopN data collection period.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.10.1.12 |
olTRTrafTopNOutMulticastFramesThe number of frames transmitted by this address
that were directed to a multicast address
during the last TopN data collection period.
Note that this number does not include frames
directed to the broadcast address.ro Counter .1.3.6.1.4.1.49.2.3.1.5.3.10.1.13 |
olTRTrafTopNSummaryTableA list containing information from olTRTrafTopNTable
provided for the convenience of network management stations
that wish to obtain this information in condensed form. SEQUENCE OF OlTRTrafTopNSummaryEntry .1.3.6.1.4.1.49.2.3.1.5.3.11 |
olTRTrafTopNSummaryEntryA segment of the Top N list for a particular statistic. OlTRTrafTopNSummaryEntry .1.3.6.1.4.1.49.2.3.1.5.3.11.1 |
olTRTrafTopNSummaryNetIDThe network index that uniquely identifies this network.
One of token-ring-1 through token-ring-7 or isolated.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.11.1.1 |
olTRTrafTopNSummaryStatisticThe object representing the statistic for each station that this
portion of the olTRTrafTopNSummaryTable is sorted on.rw Enumeration .1.3.6.1.4.1.49.2.3.1.5.3.11.1.2 |
olTRTrafTopNSummaryIndexAn index that uniquely identifies an entry in
the olTRTrafTopNSummary table among those in the same network
and for the same olTRTrafTopNSummaryStatistic.
The number of entries for this portion of olTRTrafTopNSummaryTable
is number of entries for the corresponding portion of
olTRTrafTopNTable divided by 12 (rounded up to the next integer).ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.3.11.1.3 |
olTRTrafTopNSummaryStationsA concatonated list of (up to 12) MAC addresses,
their associated slot and port, and a statistic value
for traffic associated with stations on the ring. Each entry
has 36 octets. The first 6 octets are the MAC address.
The 7th octet is the slot ID (or 255 if it is external
to the concentrator or 254 if it is on a remote ring).
The 8th is the port ID (or 255 if it is external to the
concentrator or 254 if it is on a remote ring).
The 9th through 36th octets contain the values of the
statistics olTRTrafTopNInFrames, olTRTrafTopNOutFrames,
olTRTrafTopNInOctets, olTRTrafTopNOutOctets,
olTRTrafTopNOutErrors, olTRTrafTopNOutBroadcastFrames,
and olTRTrafTopNOutMulticastFrames. Each statistic is
represented in 4 octets, most significant octet first.
The stations are in order of decreasing values of the
statistic referenced by olTRTrafTopNStatistic.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.5.3.11.1.4 |
olFDDInet OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.5.4 |
olFDDIStatsModTableA table of statistical information counted for each module
in each FDDI network. SEQUENCE OF OlFDDIStatsModEntry .1.3.6.1.4.1.49.2.3.1.5.4.2 |
olFDDIStatsModEntryA list of statistical information for each module
on each FDDI network in the concentrator. OlFDDIStatsModEntry .1.3.6.1.4.1.49.2.3.1.5.4.2.1 |
olFDDIStatsModSlotIndexThe slot number that contains this module.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.4.2.1.1 |
olFDDIStatsModMgtRcvErrsThe number of errors encountered while receiving data
on the Management Channel.ro Counter .1.3.6.1.4.1.49.2.3.1.5.4.2.1.2 |
olFDDIStatsModMgtXmitErrsThe number of errors encountered while transmitting data
on the Management Channel.ro Counter .1.3.6.1.4.1.49.2.3.1.5.4.2.1.3 |
olFDDIStatsModBackplaneErrsThe number of errors while receiving and transmitting
network data on the backplane.ro Counter .1.3.6.1.4.1.49.2.3.1.5.4.2.1.4 |
olFDDIStatsModPllUnlockErrsThe number of times the phased lock loop on the
backplane network data channel was lost.ro Counter .1.3.6.1.4.1.49.2.3.1.5.4.2.1.5 |
olFDDIStatsPortTableA table of statistical information counted for each Port
in each FDDI network. SEQUENCE OF OlFDDIStatsPortEntry .1.3.6.1.4.1.49.2.3.1.5.4.3 |
olFDDIStatsPortEntryA list of statistical information for each Port
on each FDDI network in the concentrator. OlFDDIStatsPortEntry .1.3.6.1.4.1.49.2.3.1.5.4.3.1 |
olFDDIStatsPortSlotIndexThe slot number that contains this Port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.4.3.1.1 |
olFDDIStatsPortIndexThe Port number of this portro INTEGER .1.3.6.1.4.1.49.2.3.1.5.4.3.1.2 |
olFDDIStatsPortLCTFailCtsThe count of the consecutive times the link
confidence test (LCT) has failed during connection
management. Once the connection has been established,
the count is zeroed. (refer to ANSI 9.4.1).ro Counter .1.3.6.1.4.1.49.2.3.1.5.4.3.1.3 |
olFDDIStatsPortLerEstimateA long term average link error rate. It ranges
from 10**-4 to 10**-15 and is reported as the
absolute value of the exponent of the estimate
(the larger the number, the smaller the value).ro Gauge .1.3.6.1.4.1.49.2.3.1.5.4.3.1.4 |
olFDDIStatsPortLemRejectCtsA link error monitoring count of the times that a
link has been removed from the ring due to the
LerCutOff threshold being exceeded.ro Counter .1.3.6.1.4.1.49.2.3.1.5.4.3.1.5 |
olFDDIStatsPortLemCtsThe aggregate link error monitor error count, set
to zero only on station power up. This variable's
long term rate average is lerEstimate.ro Counter .1.3.6.1.4.1.49.2.3.1.5.4.3.1.6 |
olFDDInetStatsTableA table of statistical information counted for each FDDI
network in the concentrator SEQUENCE OF OlFDDInetStatsEntry .1.3.6.1.4.1.49.2.3.1.5.4.4 |
olFDDInetStatsEntryA list of statistical information for each FDDI
network in the concentrator. OlFDDInetStatsEntry .1.3.6.1.4.1.49.2.3.1.5.4.4.1 |
olFDDInetStatsNetIDThe network index that uniquely identifies this network.
One of isolated, fddi-1, fddi-2, fddi-3, or fddi-4.ro Enumeration .1.3.6.1.4.1.49.2.3.1.5.4.4.1.1 |
olFDDInetStatsRingOpCountsThe number times the ring transitioned to operational.ro Counter .1.3.6.1.4.1.49.2.3.1.5.4.4.1.2 |
olFDDInetStatsFrameCountsFrame_Ct (refer to ANSI MAC 2.2.1).ro Counter .1.3.6.1.4.1.49.2.3.1.5.4.4.1.3 |
olFDDInetStatsErrorCountsError_Ct (refer to ANSI MAC 2.2.1).ro Counter .1.3.6.1.4.1.49.2.3.1.5.4.4.1.4 |
olFDDInetStatsLostCountsLost_Ct (refer to ANSI MAC 2.2.1).ro Counter .1.3.6.1.4.1.49.2.3.1.5.4.4.1.5 |
olFDDInetStatsFrameErrorRatioThis attribute is the actual ratio, ((delta
snmpFddiMACLostCt + delta snmpFddiMACErrorCt) /
(delta snmpFddiMACFrameCt + delta
snmpFddiMACLostCt)) x 2**16.ro INTEGER .1.3.6.1.4.1.49.2.3.1.5.4.4.1.6 |
olGroups OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.6 |
olGroupPortTableA list of groups that each port is in. Each port can
can be in 0, 1, or many groups. SEQUENCE OF OlGroupPortEntry .1.3.6.1.4.1.49.2.3.1.6.1 |
olGroupPortEntryThe groups corresponding to a particular port. OlGroupPortEntry .1.3.6.1.4.1.49.2.3.1.6.1.1 |
olGroupPortSlotIndexThe slot number that contains this port.ro INTEGER .1.3.6.1.4.1.49.2.3.1.6.1.1.1 |
olGroupPortIndexThe port number within this slot. Logical ports
can not be put into groups.ro INTEGER .1.3.6.1.4.1.49.2.3.1.6.1.1.2 |
olGroupPortGroupIDThe group(s) to which the port has been assigned.ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.6.1.1.3 |
olGroupSummaryTableA table of condensed group information listing all the ports
in each group. SEQUENCE OF OlGroupSummaryEntry .1.3.6.1.4.1.49.2.3.1.6.2 |
olGroupSummaryEntryThe summary of all the ports in a particular group. OlGroupSummaryEntry .1.3.6.1.4.1.49.2.3.1.6.2.1 |
olGroupSummaryGroupIDThe group to which the ports have been assigned. A port
can be in one or more groups.ro Enumeration .1.3.6.1.4.1.49.2.3.1.6.2.1.1 |
olGroupSummaryIndexThe index into the summary array. Up to 256 ports will be shown
in olGroupSummaryPorts for each value in this entry.ro INTEGER .1.3.6.1.4.1.49.2.3.1.6.2.1.2 |
olGroupSummaryPortsA condensed list of all the ports in this group. The summary
is in the format: Slotx PortX SlotY PortY ...ro OCTET STRING .1.3.6.1.4.1.49.2.3.1.6.2.1.3 |
olGroupSet OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.6.3 |
olGroupSetActionThis object specifies the action that we apply on
a group. add-ports(1) adds port(s) to a group,
clear-ports(2) clears (delete) port(s) from a group,
and set-admin-state sets the Admin State of
the group.rw Enumeration .1.3.6.1.4.1.49.2.3.1.6.3.1 |
olGroupSetGroupIDA group index that uniquely identifies this group. A port
can be in zero, one, or more groups.rw Enumeration .1.3.6.1.4.1.49.2.3.1.6.3.2 |
olGroupSetSlotIndexThis object specifies the slot number of the port(s) that
are to be added/cleared to/from the group. This object should
be set whenever add-ports(1) or clear-ports(2) are selected
for olGroupSetAction. Value 254 refers to all non-existing
ports, and value 255 refers to all slots which are only valid
when olGroupSetAction is clear-ports(2).rw INTEGER .1.3.6.1.4.1.49.2.3.1.6.3.3 |
olGroupSetPortIndexThis object specifies the port number of the port(s) that
are to be added/cleared to/from the group. This object should
be set whenever add-ports(1) or clear-ports(2) are selected
for olGroupSetAction. Value 255 refers to all ports.rw INTEGER .1.3.6.1.4.1.49.2.3.1.6.3.4 |
olGroupSetAdminStateThis object specifies the Admin State that all the ports in
the group defined by olGroupSetGroupID should be set to.
This object should be set whenever set-admin-state(3) is
selected for olGroupSetAction.rw Enumeration .1.3.6.1.4.1.49.2.3.1.6.3.5 |
olAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.7 |
olThresh OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.7.1 |
olThreshControl OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.7.1.1 |
olThreshTotalEntriesThe number of entries currently in olThreshTable.ro INTEGER .1.3.6.1.4.1.49.2.3.1.7.1.1.1 |
olThreshMaxEntriesThe maximum number of entries in olThreshTable supported by
this agent.ro INTEGER .1.3.6.1.4.1.49.2.3.1.7.1.1.2 |
olThreshLastCreatedIndexThe index of the last entry in olThreshTable created via index 255
(see olThreshMode). If none, this value will be zero.ro INTEGER .1.3.6.1.4.1.49.2.3.1.7.1.1.3 |
olThreshAllModeProvides the management station with a convenient way to set
olThreshMode for all of the entries in ThreshTable.
Setting olThreshAllMode to enable(1) or disable(2)
will not cause new entries to be created; this
will only affect entries that have presiously been created.
Getting olThreshAllMode will always yield clear(3).rw Enumeration .1.3.6.1.4.1.49.2.3.1.7.1.1.4 |
olThreshTableA list of thresholding entries. SEQUENCE OF OlThreshEntry .1.3.6.1.4.1.49.2.3.1.7.1.2 |
olThreshEntryA collection of variables for controlling and monitoring a
specific threshold. OlThreshEntry .1.3.6.1.4.1.49.2.3.1.7.1.2.1 |
olThreshIndexAn index that uniquely identifies an entry in
the olThresh table. The number of entries in olTRThreshTable
is olThreshTotalEntries. A new entry is created when a value is
written to any object within the entry. An entry is removed when
olThreshMode is set to clear(3).
Index 255 references a 'pseudo entry' that allows
the management station to create a new entry without having to
search for a clear entry.
When olThreshMode for entry 255 is set to disable or enable,
if there is no available (clear) entry, then the SNMP set-response will
indicate a bad value error, otherwise the agent does the following:
- set the value of olThreshLastCreatedIndex to the index
of the available entry
- copy the values currently in entry 255 to the available entry
- clear out entry 255.ro INTEGER .1.3.6.1.4.1.49.2.3.1.7.1.2.1.1 |
olThreshModeThe mode for this threshold.
enable(1) indicates that this entry
is in use and thresholding will be done.
disable(2) indicates that this entry
is in use but will no thresholding will be done.
Setting olThreshMode to clear(3) will cause this entry to be
removed from the table.rw Enumeration .1.3.6.1.4.1.49.2.3.1.7.1.2.1.2 |
olThreshDescriptionDescription of the threshold to be sent with the
chipAboveThreshold trap.rw DisplayString .1.3.6.1.4.1.49.2.3.1.7.1.2.1.3 |
olThreshObjectIdentifierThe object identifier that specifies the statistic to be
thresholded. The statistic to be thresholded can be
specified either by setting olThreshObjectIdentifier
or by setting values of the olThreshStat group of variables.
When olThreshObjectIdentifier is set, the agent changes
the values of the olThreshStat group of variables
to refer to the new statistic to be thresholded.
Similarly, when a olThreshStat variable is set, the agent
changes olThreshObjectIdentifier to refer to the new statistic
to be thresholded. A null object identifier (0.0) is used
when no statistic is specified.rw OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.1.7.1.2.1.4 |
olThreshStatCategorySpecifies the category of statistic to be thresholded.
When olThreshStatCategory is network(2) or station(4),
olThreshStatNetID may also be specified.
When olThreshStatCategory is station(4),
olThreshStatStation must be specified.
When olThreshStatCategory is port(3), olThreshStatSlotIndex
and olThreshStatPortIndex must be specified.rw Enumeration .1.3.6.1.4.1.49.2.3.1.7.1.2.1.5 |
olThreshStatTypeSpecifies the type of statistic to be thresholded.
error-frames(6) is valid only when olThreshStatCategory is
port(3) or station(4). tr-net-soft-errors(7) or
tr-net-hard-errors(8) is valid only when olThreshStatCategory
is network(2). Note that tr-net-soft-errors(7) and
tr-net-hard-errors(8) refer to dot5StatsSoftErrors
and dot5StatsHardErrors, respectively. The other choices
refer for items in the olTRTraf tables.rw Enumeration .1.3.6.1.4.1.49.2.3.1.7.1.2.1.6 |
olThreshStatNetIDWhen olThreshStatCategory is network(2) or station(4),
specifies the network of statistic to be thresholded.
If the agent is capable of collecting statistics only for
the network that it is attached to, olThreshStatNetID can
be set to agent-network(255); the agent will change
olThreshStatNetID to reflect the network that the agent
is currently attached to. If olThreshStatType is
tr-net-soft-errors(7) or tr-net-hard-errors(8) the
agent will change olThreshStatNetID to other(1).rw Enumeration .1.3.6.1.4.1.49.2.3.1.7.1.2.1.7 |
olThreshStatSlotIndexWhen olThreshStatCategory is port(3), specifies the
slot index of the port of statistic to be thresholded.rw INTEGER .1.3.6.1.4.1.49.2.3.1.7.1.2.1.8 |
olThreshStatPortIndexWhen olThreshStatCategory is port(3), specifies the
port index of the port of statistic to be thresholded.rw INTEGER .1.3.6.1.4.1.49.2.3.1.7.1.2.1.9 |
olThreshStatStationAddrWhen olThreshStatCategory is station(4), specifies the
MAC address of the station of statistic to be thresholded.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.49.2.3.1.7.1.2.1.10 |
olThreshIntervalSpecifies the length of the thresholding period in seconds.
Minimum length is 5 seconds; maximum is 86400 seconds
(24 hours).rw INTEGER .1.3.6.1.4.1.49.2.3.1.7.1.2.1.11 |
olThreshConditionSpecifies the type of conditional comparison for the
threshold.rw Enumeration .1.3.6.1.4.1.49.2.3.1.7.1.2.1.12 |
olThreshValueAt the end of each thresholding interval (olThreshInterval
seconds), olThreshCurrentValue is compared against
olThreshValue (unsigned).
When olThreshType is delta-above(1):
If olThreshStatus is valid(4), and olThreshCurrentValue is
above olThreshValue, and olThreshMode is enabled,
then a chipAboveThreshold trap will be sent.
Another chipAboveThreshold trap will not be sent until
olThreshCurrentValue drops to less than or equal to
olThreshValue and then again exceeds it.rw INTEGER .1.3.6.1.4.1.49.2.3.1.7.1.2.1.13 |
olThreshCurrentValueWhen olThreshType is delta-exceed(1):
The most recent delta value of olThreshStatObjectIdentifier
(i.e. value of olThreshStatObjectIdentifier at the end of
the interval minus the value of olThreshStatObjectIdentifier
at the beginning of the interval).
If olThreshStatus is not valid(4), olThreshCurrentValue will be 0.ro INTEGER .1.3.6.1.4.1.49.2.3.1.7.1.2.1.14 |
olThreshStatusWhen olThreshType is delta-exceed(1):
If olThreshStatObjectIdentifier has not yet been specified,
olThreshStatus will be no-statistic-specified(1).
If the first interval has not yet completed,
olThreshStatus will be not-yet-available(2).
If object referenced by olThreshStatObjectIdentifier is not
accessible, olThreshStatus will be not-accessible(3).
Otherwise olThreshStatus will be valid(4).ro Enumeration .1.3.6.1.4.1.49.2.3.1.7.1.2.1.15 |
olThreshTimeSinceLastTriggeredTime in TimeTicks that has elapsed since a chipAboveThreshold trap
associated with this ThreshEntry was last sent.
If never sent, this value shall be zero.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.49.2.3.1.7.1.2.1.16 |
olThreshActionTypeThe action to be performed when the threshold is triggered.rw Enumeration .1.3.6.1.4.1.49.2.3.1.7.1.2.1.17 |
olThreshActionDataAdditional information to be sent with the
chipAboveThreshold trap. Provided for use by the
network management station (NMS) - not interpreted by
the agent. A network management station (NMS)
could use olThreshActionData to specify an action to be
performed by the NMS when the chipAboveThreshold trap
is received.rw INTEGER .1.3.6.1.4.1.49.2.3.1.7.1.2.1.18 |
olThreshActionPriorityThe priority for this entry. Provided for use by the
network management station (NMS) - not interpreted by
the agent.rw Enumeration .1.3.6.1.4.1.49.2.3.1.7.1.2.1.19 |
oebm OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.2 |
midnight OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.3 |
workGroupHub OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4 |
hubSysGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.1 |
hardwareGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.2 |
softwareGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.3 |
hubGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.4 |
boardGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.5 |
portGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.6 |
alarmGroup OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.4.7 |
emm OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.5 |
chipBridge OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.6 |
trmm OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.7 |
fmm OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.8 |
focus1 OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.9 |
oeim OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.3.10 |
chipExperiment OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4 |
chipExpTokenRing OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4.1 |
dot5 OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4.1.1 |
dot1dBridge OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.4.14 |
chipTTY OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.5 |
chipTTYNumberThe number of terminal ports on this agent product.ro INTEGER .1.3.6.1.4.1.49.2.5.1 |
chipTTYTableA table of TTY specific information associated with
this agent. SEQUENCE OF ChipTTYEntry .1.3.6.1.4.1.49.2.5.2 |
chipTTYEntryA profile of a specific TTY interface associated with
this agent. ChipTTYEntry .1.3.6.1.4.1.49.2.5.2.1 |
chipTTYIndexThe TTY to which this entry refers.ro INTEGER .1.3.6.1.4.1.49.2.5.2.1.1 |
chipTTYBaudThe baud rate for this TTY. It should be noted that all
serial ports do not support all of the above baud rates.rw Enumeration .1.3.6.1.4.1.49.2.5.2.1.2 |
chipTTYParityThe parity setting for this TTY.rw Enumeration .1.3.6.1.4.1.49.2.5.2.1.3 |
chipTTYStopThe number of stop bits for this TTY.rw Enumeration .1.3.6.1.4.1.49.2.5.2.1.4 |
chipTTYDataThe number of data bits for this TTY.rw Enumeration .1.3.6.1.4.1.49.2.5.2.1.5 |
chipTTYTimeoutThe number of minutes to wait before this agent logs out
an inactive login session on this TTY.
NOTE: In some implementations, this is a single variable
that is used by all of the terminal and telnet
sessions.rw INTEGER .1.3.6.1.4.1.49.2.5.2.1.6 |
chipTTYPromptThe terminal prompt to display on this TTY.
NOTE: In some implementations, this is a single variable
that is used by all of the terminal and telnet
sessions.rw DisplayString .1.3.6.1.4.1.49.2.5.2.1.7 |
chipTTYDTRThis value dictates the behavior of the RS-232 Data
Terminal Ready (DTR) signal at the time a session ends
due to a logout, timeout, or shutdown. This is used by
some modems as an indication that they should hangup.
This variable is only support if the RS-232 port has a
DTR signal.rw Enumeration .1.3.6.1.4.1.49.2.5.2.1.8 |
chipTTYTerminalTypeA string which indicates the type of terminal that
is attached to the serial port. It should be noted that
the string is passed to a telnet server whenever the server
issues the IAC DO TERMINAL-TYPE command (see rfc884).rw DisplayString .1.3.6.1.4.1.49.2.5.2.1.9 |
chipTFTP OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.6 |
chipTFTPStartSetting chipTFTPStart to tftpGet(2) initiates a file
transfer to the agent (download); tftpPut(3) initiates
a file transfer to the server (upload).rw Enumeration .1.3.6.1.4.1.49.2.6.1 |
chipTFTPSlotThe slot number of the module that is to be involved
in the TFTP transfer with the TFTP server (chipTFTPIpAddress).rw Enumeration .1.3.6.1.4.1.49.2.6.2 |
chipTFTPIpAddressThe IP Address of the TFTP server.rw IpAddress .1.3.6.1.4.1.49.2.6.3 |
chipTFTPFileNameThe file name of the file to retrieve (tftpGet), or the
name of the file to create (tftpPut).rw DisplayString .1.3.6.1.4.1.49.2.6.4 |
chipTFTPFileTypeThe type of file image to upload/download. The file
type indicates to the agent what kind of file it is
receiving. flashCode(1) indicates a code upgrade of
the operational proms. bootCode(2) indicates a code
upgrade of the boot proms.rw Enumeration .1.3.6.1.4.1.49.2.6.5 |
chipTFTPResultThe result of the last TFTP operation.ro Enumeration .1.3.6.1.4.1.49.2.6.6 |
chipDownload OBJECT IDENTIFIER .1.3.6.1.4.1.49.2.7 |
chipDownloadUDKSerialA string representing the serial number of the
Upgrade Distribution Kit.rw DisplayString .1.3.6.1.4.1.49.2.7.1 |
chipDownloadKeyThe key code provided by your VAR. Available by
calling technical support at +1 508 460 6195.rw DisplayString .1.3.6.1.4.1.49.2.7.2 |
chipDownloadDateTimeThe date of the last successful download in the
format hh:mm day DD Mon YYro DisplayString .1.3.6.1.4.1.49.2.7.3 |