CABH-CTP-MIB
AI MIB Summary
The CABH-CTP-MIB module provides SNMP-based diagnostic control interfaces for CableHome Test Portal (CTP) implementations within CableLabs-compliant cable modem termination systems and CMTS software. It enables the remote initiation, configuration, and monitoring of cable network performance testing sessions, including signal quality measurements and connectivity verification procedures.
This MIB module defines the diagnostic controls offered by the CableHome Test Portal (CTP). Acknowledgements: Roy Spitzer - Consultant to CableLabs Mike Mannette - Consultant to CableLabs Randy Dunton - Intel Dmitrii Loukianov - Intel Wes Peters - DoBox, Inc. Chris Zacker Broadcom
Main OID:
cabhCtpMib.1.3.6.1.4.1.4491.2.4.5
43
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
43 total| Object Name |
|---|
cabhCtpMibThis MIB module defines the diagnostic controls offered by the CableHome Test Portal (CTP). Acknowledgements: Roy Spitzer - Consultant to CableLabs Mike Mannette - Consultant to CableLabs Randy Dunton - Intel Dmitrii Loukianov - Intel Wes Peters - DoBox, Inc. Chris Zacker Broadcom MODULE-IDENTITY .1.3.6.1.4.1.4491.2.4.5 |
cabhCtpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.5.1 |
cabhCtpBase OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.5.1.1 |
cabhCtpSetToFactorySetting this object to true(1) causes all the tables in the CTP MIB to be cleared, and all CTP MIB objects with default values set back to those default values. Reading this object always returns false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4491.2.4.5.1.1.1 |
cabhCtpConnSpeed OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.5.1.2 |
cabhCtpConnSrcIpTypeThe IP Address type used as the source address for the Connection Speed Test.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.5.1.2.1 |
cabhCtpConnSrcIpThe IP Address used as the source address for the Connection Speed Test. The default value is the value of cabhCdpServerRouter (192.168.0.1).rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.5.1.2.2 |
cabhCtpConnDestIpTypeThe IP Address Type for the CTP Connection Speed Tool destination address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.5.1.2.3 |
cabhCtpConnDestIpThe IP Address used as the destination address for the Connection Speed Test.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.5.1.2.4 |
cabhCtpConnProtoThe protocol used in the Connection Speed Test. TCP testing is optional.rw Enumeration .1.3.6.1.4.1.4491.2.4.5.1.2.5 |
cabhCtpConnNumPktsThe number of packets the CTP is to send when triggered to execute the Connection Speed Tool.rw INTEGER .1.3.6.1.4.1.4491.2.4.5.1.2.6 |
cabhCtpConnPktSizeThe size of the test frames.rw INTEGER .1.3.6.1.4.1.4491.2.4.5.1.2.7 |
cabhCtpConnTimeOutThe timeout value for the response. A value of zero indicates no time out and can be used for TCP only.rw INTEGER .1.3.6.1.4.1.4491.2.4.5.1.2.8 |
cabhCtpConnControlThe control for the Connection Speed Tool. Setting this object to start(1) causes the Connection Speed Tool to execute. Setting this object to abort(2) causes the Connection Speed Tool to stop running. This parameter should only be set via SNMP.rw Enumeration .1.3.6.1.4.1.4491.2.4.5.1.2.9 |
cabhCtpConnStatusThe status of the Connection Speed Tool.ro Enumeration .1.3.6.1.4.1.4491.2.4.5.1.2.10 |
cabhCtpConnPktsSentThe number of packets the CTP sent after it was triggered to execute the Connection Speed Tool.ro INTEGER .1.3.6.1.4.1.4491.2.4.5.1.2.11 |
cabhCtpConnPktsRecvThe number of packets the CTP received after it executed the Connection Speed Tool.ro INTEGER .1.3.6.1.4.1.4491.2.4.5.1.2.12 |
cabhCtpConnRTTThe resulting round trip time for the set of packets sent to and received from the target LAN IP Device.ro INTEGER .1.3.6.1.4.1.4491.2.4.5.1.2.13 |
cabhCtpConnThroughputThe average round-trip throughput measured in kilobits per second.ro INTEGER .1.3.6.1.4.1.4491.2.4.5.1.2.14 |
cabhCtpPing OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.5.1.3 |
cabhCtpPingSrcIpTypeThe IP Address Type for CTP Ping Tool source address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.5.1.3.1 |
cabhCtpPingSrcIpThe IP Address used as the source address for the Ping Test. The default value is the value of CabhCdpServerRouter (192.168.0.1).rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.5.1.3.2 |
cabhCtpPingDestIpTypeThe IP Address Type for the CTP Ping Tool destination address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.5.1.3.3 |
cabhCtpPingDestIpThe Destination IP Address used as the destination address for the Ping Test.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.4491.2.4.5.1.3.4 |
cabhCtpPingNumPktsThe number of packets to send to each host.rw INTEGER .1.3.6.1.4.1.4491.2.4.5.1.3.5 |
cabhCtpPingPktSizeThe size of the test frames.rw INTEGER .1.3.6.1.4.1.4491.2.4.5.1.3.6 |
cabhCtpPingTimeBetweenThe time between sending one ping and the next.rw INTEGER .1.3.6.1.4.1.4491.2.4.5.1.3.7 |
cabhCtpPingTimeOutThe time out for ping response (ICMP reply) for a single transmitted ping message (ICMP request).rw INTEGER .1.3.6.1.4.1.4491.2.4.5.1.3.8 |
cabhCtpPingControlThe control for the Ping Tool. Setting this object to start(1) causes the Ping Tool to execute. Setting this object to abort(2) causes the Ping Tool to stop running. This parameter should only be set via SNMP.rw Enumeration .1.3.6.1.4.1.4491.2.4.5.1.3.9 |
cabhCtpPingStatusThe status of the Ping Tool.ro Enumeration .1.3.6.1.4.1.4491.2.4.5.1.3.10 |
cabhCtpPingNumSentThe number of Pings sentro INTEGER .1.3.6.1.4.1.4491.2.4.5.1.3.11 |
cabhCtpPingNumRecvThe number of pings received.ro INTEGER .1.3.6.1.4.1.4491.2.4.5.1.3.12 |
cabhCtpPingAvgRTTThe resulting average of round trip times for acknowledged packets.ro INTEGER .1.3.6.1.4.1.4491.2.4.5.1.3.13 |
cabhCtpPingMaxRTTThe resulting maximum of round trip times for acknowledged packets.ro INTEGER .1.3.6.1.4.1.4491.2.4.5.1.3.14 |
cabhCtpPingMinRTTThe resulting minimum of round trip times for acknowledged packets.ro INTEGER .1.3.6.1.4.1.4491.2.4.5.1.3.15 |
cabhCtpPingNumIcmpErrorNumber of ICMP errors.ro INTEGER .1.3.6.1.4.1.4491.2.4.5.1.3.16 |
cabhCtpPingIcmpErrorThe last ICMP error.ro INTEGER .1.3.6.1.4.1.4491.2.4.5.1.3.17 |
cabhCtpNotification OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.5.2.0 |
cabhCtpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.5.3 |
cabhCtpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.5.3.1 |
cabhCtpBasicComplianceThe compliance statement for devices that implement Portal Service feature. Unknown .1.3.6.1.4.1.4491.2.4.5.3.1.3 |
cabhCtpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.4491.2.4.5.3.2 |
cabhCtpGroupGroup of objects for CableHome CTP MIB. Unknown .1.3.6.1.4.1.4491.2.4.5.3.2.1 |