BROCADE-SPX-MIB
AI MIB Summary
The BROCADE-SPX-MIB provides SNMP access to the 802.1BR SPX (Service Provider Exchange) configuration parameters and operational status on Brocade FastIron ICX7750 and ICX7450 platforms. It enables monitoring of SPX tunnel states, interface bindings, and protocol-specific counters required for managing service provider bridging services.
Management Information for 802.1BR SPX system configuration and operational status.
Supported Platforms:
- supported on FastIron ICX7750/ICX7450 platforms.
Copyright 1996-2015 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
Main OID:
brcdSPXMIB.1.3.6.1.4.1.6321.1.2.3.2.10.3.40
44
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
44 total| Object Name |
|---|
brcdSPXMIBManagement Information for 802.1BR SPX system
configuration and operational status.
Supported Platforms:
- supported on FastIron ICX7750/ICX7450 platforms.
Copyright 1996-2015 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information
Base Specification embodies Brocade Communications Systems
confidential and proprietary intellectual property.
Brocade Communications Systems retains all title and ownership
in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications
Systems makes no warranty, either express or implied, as to the
use, operation, condition, or performance of the specification,
and any unintended consequence it may on the user environment. MODULE-IDENTITY .1.3.6.1.4.1.6321.1.2.3.2.10.3.40 |
brcdSPXGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.1 |
brcdSPXGlobalConfigCBStateConfigure CB (Control Bridge) state for 802.1BR feature on the global level.
The set operation is allowed only on CB device.
none: reserve state.
enable: 802.1BR is enable on CB.
disable: 802.1BR is disable on CB.
The none state will be displayed if it is not a CB devicerw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.1.1 |
brcdSPXGlobalConfigPEStateConfigure PE (Port Extender) state for 802.1BR feature on the global level.
The set operation is allowed only on PE standalone device.
none: reserve state
enable: 802.1BR is enabled on PE.
disable: 802.1BR is disabled on PE.
Note that enabling/disabling PE takes effect only after system is saved
configure and reloaded. The none state will be displayed if it is not a PE devicerw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.1.2 |
brcdSPXTableObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2 |
brcdSPXConfigUnitTable802.1BR SPX configuration unit table. SEQUENCE OF BrcdSPXConfigUnitEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.1 |
brcdSPXConfigUnitEntryAn entry in SPX configuration table. BrcdSPXConfigUnitEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.1.1 |
brcdSPXConfigUnitIndexThe SPX unit Id. CB unit ID is from 1 to 16.
PE unit ID is from 17 to 56 Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.1.1.1 |
brcdSPXConfigUnitPENameA name description of PE unit.rw DisplayString .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.1.1.2 |
brcdSPXConfigUnitPESPXPort1A PE SPX port on PE unit. It returns 0 if SPX port does not exist.
Note that the maximum PE SPX port on a PE unit is 2.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.1.1.3 |
brcdSPXConfigUnitPESPXPort2A PE SPX port on PE unit. It returns 0 if SPX port does not exist.
Note that the maximum PE SPX port on a PE unit is 2.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.1.1.4 |
brcdSPXConfigUnitPESPXLag1A list of interface indices which are the port membership
of a SPX LAG group on PE. Each interface index is a 32-bit integer
in big endian order. It returns NULL if PE SPX LAG does not exist.
Note that the maximum PE SPX LAG on a PE unit is 2. Each SPX LAG group
contains up to 16 ports.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.1.1.5 |
brcdSPXConfigUnitPESPXLag2A list of interface indices which are the port membership
of a SPX LAG group on PE. Each interface index is a 32-bit integer
in big endian order. It returns NULL if PE SPX LAG does not exist.
Note that the maximum PE SPX LAG on a PE unit is 2. Each SPX LAG group
contains up to 16 ports.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.1.1.6 |
brcdSPXConfigUnitRowStatusThis object is used to delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row
If the row exists, then a SET with value of create(4)
returns error 'wrongValue'. Deleted rows go away immediately.
The following values can be returned on reads:
noSuchName...no such row
other(1).....some other cases
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.1.1.7 |
brcdSPXConfigUnitTypeA description of the configured/active system type for each unit.ro DisplayString (FOUNDRY-SN-AGENT-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.1.1.8 |
brcdSPXConfigUnitStateA state for each unit.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.1.1.9 |
brcdSPXOperUnitTable802.1BR SPX operation unit table. SEQUENCE OF BrcdSPXOperUnitEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.2 |
brcdSPXOperUnitEntryAn entry in SPX operation table. BrcdSPXOperUnitEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.2.1 |
brcdSPXOperUnitIndexThe SPX unit Id. CB unit ID is from 1 to 16.
PE unit ID is from 17 to 56 Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.2.1.1 |
brcdSPXOperUnitTypeA description of the configured/active system type for each unit.ro DisplayString (FOUNDRY-SN-AGENT-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.2.1.2 |
brcdSPXOperUnitRoleA role for each unit.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.2.1.3 |
brcdSPXOperUnitMacA MAC address for each unitro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.2.1.4 |
brcdSPXOperUnitPriorityThe priority in Active/backup election on CB units.
PE unit doesn't have priority, and 0 as default value.ro Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.2.1.5 |
brcdSPXOperUnitStateA state for each unitro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.2.1.6 |
brcdSPXOperUnitDescriptionDescribes the CB stacking or PE joining state for each unit.ro DisplayString .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.2.1.7 |
brcdSPXOperUnitImgVerThe version of the running software image for each unitro DisplayString .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.2.1.8 |
brcdSPXOperUnitBuildlVerThe version of the running software build for each unitro DisplayString .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.2.1.9 |
brcdSPXCBSPXPortTableSPX configuration CB SPX port table. SEQUENCE OF BrcdSPXCBSPXPortEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.3 |
brcdSPXCBSPXPortEntryAn entry in the SPX configuration CB SPX port table. BrcdSPXCBSPXPortEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.3.1 |
brcdSPXCBSPXPortPortThe IfIndex for the configured CB SPX port.
CB unit can have multiple SPX ports per unit. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.3.1.1 |
brcdSPXCBSPXPortPEGroupThe name of IfIndex for the configured CB SPX port.
It is an optional fieldrw DisplayString .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.3.1.2 |
brcdSPXCBSPXPortRowStatusThis object is used to delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row
create(4)...creates a new row
If the row exists, then a SET with value of create(4)
returns error 'wrongValue'. Deleted rows go away immediately.
The following values can be returned on reads:
noSuchName...no such row
other(1).....some other cases
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.3.1.3 |
brcdSPXCBSPXLagTableSPX configuration CB SPX LAG table. SEQUENCE OF BrcdSPXCBSPXLagEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.4 |
brcdSPXCBSPXLagEntryAn entry in the SPX configuration CB SPX LAG table. BrcdSPXCBSPXLagEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.4.1 |
brcdSPXCBSPXLagPrimaryPortThe LAG primary port for the configured CB SPX LAG. This primary
port is the smallest port in the CB SPX LAG group. CB unit can have
multiple SPX LAGs per unit. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.4.1.1 |
brcdSPXCBSPXLagLagIflistA list of interface indices which are the port membership
of a SPX Lag group on CB. Each interface index is a 32-bit integer
in big endian order. It returns NULL if CB SPX Lag does not exist.
Note that each CB SPX LAG group contains up to 16 ports.rw OCTET STRING .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.4.1.2 |
brcdSPXCBSPXLagPEGroupThe name of SPX LAG for the configured CB SPX LAG.
It is an optional fieldrw DisplayString .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.4.1.3 |
brcdSPXCBSPXLagRowStatusThis object is used to delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row
create(4)...creates a new row
If the row exists, then a SET with value of create(4)
returns error 'wrongValue'. Deleted rows go away immediately.
The following values can be returned on reads:
noSuchName...no such row
other(1).....some other cases
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.4.1.4 |
brcdSPXPEGroupTableSPX CB SPX port and PE group table. SEQUENCE OF BrcdSPXPEGroupEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.5 |
brcdSPXPEGroupEntryAn entry in the SPX PE group table. BrcdSPXPEGroupEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.5.1 |
brcdSPXPEGroupCBSPXPortThe IfIndex for the CB SPX port which is connected
to a group of PE units InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.5.1.1 |
brcdSPXPEGroupPEGroupThe name of IfIndex for the configured CB SPX port.
It is an optional fieldro DisplayString (FOUNDRY-SN-AGENT-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.5.1.2 |
brcdSPXPEGroupPEIdListA list of PE unit ID indices which are attached to a CB SPX port.ro DisplayString (FOUNDRY-SN-AGENT-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.5.1.3 |
brcdSPXPEGroupCBSPXEndPortThe IfIndex for the CB SPX port which is connected
to a group of PE units. This CB SPX port is at other end
if it is a ring topology. It returns 0 if it is a chain topology
and there is no the end port.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.40.2.5.1.4 |