BROCADE-QOS-MIB
AI MIB Summary
The BROCADE-QOS-MIB defines managed objects for configuring and monitoring Quality of Service traffic classification, queuing, and scheduling parameters on NetIron XMR and MLX switching platforms. It enables granular control over bandwidth allocation, packet prioritization, and congestion management policies to ensure deterministic network performance for specific traffic classes.
The MIB module contains the managed object definition for Brocade Quality of Service.
Supported Platforms:
- supported on NetIron XMR/MLX latforms.
Copyright 1996-2012 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
Main OID:
brcdQosMIB.brcdQos.1
22
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
brcdQosMIBThe MIB module contains the managed object definition for
Brocade Quality of Service.
Supported Platforms:
- supported on NetIron XMR/MLX latforms.
Copyright 1996-2012 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information
Base Specification embodies Brocade Communications Systems
confidential and proprietary intellectual property.
Brocade Communications Systems retains all title and ownership
in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications
Systems makes no warranty, either express or implied, as to the
use, operation, condition, or performance of the specification,
and any unintended consequence it may on the user environment. MODULE-IDENTITY .brcdQos.1 |
brcdHqosObjects OBJECT IDENTIFIER .brcdQos.1.1 |
brcdHqosStatsTableA list of brcHqosStats entries. This table contains information
of various HQoS counters. The HQoS is supported on NI-MLX-10Gx8-M/D
LP modules. SEQUENCE OF BrcdHqosStatsEntry .brcdQos.1.1.1 |
brcdHqosStatsEntryAn entry containing Hqos statistics counter information applicable
for 10Gx8 interface if the module is physically present. BrcdHqosStatsEntry .brcdQos.1.1.1.1 |
brcdHqosIfIndexThe index of the interface index where the HQoS is configured.
The LP module must be physically present and operationally up. InterfaceIndex (IF-MIB) .brcdQos.1.1.1.1.1 |
brcdHqosEndpointTypeThis object specifies the End point type for HQoS scheduler. Enumeration .brcdQos.1.1.1.1.2 |
brcdHqosEndpointTagThis object specifies the HQoS end point tag.
If the brcdHqosEndpointType is other(1), then this object
has zero value.
If the brcdHqosEndpointType is singleTaggedVlan(2),
dougleTaggedVlan(3) or bVlanIsid(4), then this object has
VLAN id. The valid VLAN ids are 1 to 4094. Unsigned32 .brcdQos.1.1.1.1.3 |
brcdHqosEndpointInnerTagThis object specifies the HQoS end point inner tag.
If the brcdHqosEndpointType is other(1) or singleTaggedVlan(2)
then this object has zero value.
If the brcdHqosEndpointType is dougleTaggedVlan(3) then this
object has VLAN id. The valid VLAN ids are 1 to 4094
If the index brcdHqosEndpointType is bVlanIsid(4), then this object
has ISID value. The valid ISID are 256 to 16777214. Unsigned32 .brcdQos.1.1.1.1.4 |
brcdHqosStatsPriorityThe priority of the packets that will be stored in this queue.
This is 1-based index.
The HQoS queue with brcdHqosEndpointType as other(1) have
8 priorities. All other HQoS queues have 4 priorities, two
consecutive priorities are stored in one queue. In this case,
the valid values for this index are 1, 3, 5 and 7. The queue
with priority 1 has the packets with priority 1 and 2.
Same applies for priority 3, 5 and 7 PortPriorityTC (FOUNDRY-SN-SWITCH-GROUP-MIB) .brcdQos.1.1.1.1.5 |
brcdHqosStatsDescriptionThis object gives the HQoS scheduler node name in full path
format with each node separated by dot.ro DisplayString (SNMPv2-TC) .brcdQos.1.1.1.1.6 |
brcdHqosStatsEnquePktsA count of all packets entering ingress queues on this queue.ro Counter64 .brcdQos.1.1.1.1.7 |
brcdHqosStatsEnqueBytesA count of all bytes entering ingress queues on this queue.ro Counter64 .brcdQos.1.1.1.1.8 |
brcdHqosStatsDequePktsA count of all packets dequeued from ingress queues and forwarded
on this queue.ro Counter64 .brcdQos.1.1.1.1.9 |
brcdHqosStatsDequeBytesA count of all bytes dequeued from ingress queues and forwarded on
this queue.ro Counter64 .brcdQos.1.1.1.1.10 |
brcdHqosStatsTotalDiscardPktsA count of all packets failing to enter ingress queues on this
queue. This may be due to:
* The queue reaching its maximum depth, WRED, or other reasons.
* The network processor deciding to drop packets for reasons
including: an unknown Layer-3 route, RPF, or segment filtering.ro Counter64 .brcdQos.1.1.1.1.11 |
brcdHqosStatsTotalDiscardBytesA count of all bytes failing to enter ingress queues on this
queue. This may be due to:
* The queue reaching its maximum depth, WRED, or other reasons.
* The network processor deciding to drop packets for reasons
including: an unknown Layer-3 route, RPF, or segment filteringro Counter64 .brcdQos.1.1.1.1.12 |
brcdHqosStatsOldestDiscardPktsA count of all packets entering ingress queues on this queue,
but deleted afterwards due to buffer full.ro Counter64 .brcdQos.1.1.1.1.13 |
brcdHqosStatsOldestDiscardBytesA count of all bytes entering ingress queues on this queue,
but deleted afterwards due to buffer fullro Counter64 .brcdQos.1.1.1.1.14 |
brcdHqosStatsWREDDroppedPktsA count of all bytes entering ingress queues on this queue,
but deleted afterwards due to buffer fullro Counter64 .brcdQos.1.1.1.1.15 |
brcdHqosStatsWREDDroppedBytesA count of all bytes entering ingress queues on this queue,
but deleted afterwards due to buffer fullro Counter64 .brcdQos.1.1.1.1.16 |
brcdHqosStatsCurrentQDepthThe current queue depth.ro Counter64 .brcdQos.1.1.1.1.17 |
brcdHqosStatsMaxQDepthSinceLastReadThe maximum queue depth since last access to read.ro Counter64 .brcdQos.1.1.1.1.18 |