BRCM-USB-FACTORY-MIB
AI MIB Summary
The BRCM-USB-FACTORY-MIB facilitates the monitoring and management of USB subsystem factory test parameters, calibration data, and operational status for Broadcom cable data access nodes. It exposes specific metrics related to USB controller initialization sequences, device enumeration states, and factory-mode diagnostic counters required for manufacturing validation and field service diagnostics.
Broadcom cabledata factory MIB
Main OID:
usbFactory.cableDataFactory.8
5
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
5 total| Object Name |
|---|
usbFactoryBroadcom cabledata factory MIB MODULE-IDENTITY .cableDataFactory.8 |
usbFactMacAddressThe MAC SA that will be used when building the LLC header for packets
from the PC attached via USB.rw MacAddress (SNMPv2-TC) .cableDataFactory.8.1 |
usbFactVendorIdThe USB Vendor Id that will be used during USB enumeration. This is
used by the PC in combination with the USB Device Id to select a USB
driver.rw Unsigned32 .cableDataFactory.8.2 |
usbFactDeviceIdThe USB Device Id that will be used during USB enumeration. This is
used by the PC in combination with the USB Vendor Id to select a USB
driver.rw Unsigned32 .cableDataFactory.8.3 |
usbFactRNDISDriverEnableEnables or Disables the USB RNDIS Driver that will be used during USB
enumeration. This is used by the PC in combination with the USB Vendor
ID and USB Device Id to select a USB driver.rw TruthValue (SNMPv2-TC) .cableDataFactory.8.4 |