BLADETYPE2-TRAP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for BLADETYPE2-TRAP-MIB.
37
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
bt2Traps OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7 |
bt2SwPrimaryPowerSupplyFailureA bt2SwPrimaryPowerSupplyFailure trap signifies that the
primary power supply failed. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.1 |
bt2SwDefGwUpA bt2SwDefGwUp trap signifies that the default
gateway is alive. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.2 |
bt2SwDefGwDownA bt2SwDefGwDown trap signifies that the default
gateway is down. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.3 |
bt2SwDefGwInServiceA bt2SwDefGwEnabled trap signifies that the default
gateway is up and in service. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.4 |
bt2SwDefGwNotInServiceA bt2SwDefGwDisabled trap signifies that the default
gateway is alive but not in service. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.5 |
bt2SwVrrpNewMasterThe bt2SwVrrpNewMaster trap indicates that the sending agent
has transitioned to 'Master' state. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.16 |
bt2SwVrrpNewBackupThe bt2SwVrrpNewBackup trap indicates that the sending agent
has transitioned to 'Backup' state. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.17 |
bt2SwVrrpAuthFailureA bt2SwVrrpAuthFailure trap signifies that a packet has
been received from a router whose authentication key
or authentication type conflicts with this router's
authentication key or authentication type. Implementation
of this trap is optional. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.18 |
bt2SwLoginFailureA bt2SwLoginFailure trap signifies that someone failed to
enter a valid username/password combination. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.19 |
bt2SwTempExceedThresholdA bt2SwTempExceedThreshold trap signifies that the
switch temperature has exceeded maximum safety limits. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.22 |
bt2SwRackLocationChangeA bt2SwRackLocationChange trap signifies that the rack
location has been changed. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.26 |
bt2SwApplyCompleteA bt2SwApplyComplete signifies that new configuration
has been applied. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.27 |
bt2SwSaveCompleteA bt2SwApplyComplete signifies that new configuration
has been saved. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.28 |
bt2SwFwDownloadSucessA bt2SwFwDownloadSuccess signifies that firmware
has been downloaded to [image1|image2|boot image]. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.29 |
bt2SwFwDownloadFailureA bt2SwFwDownloadFailure signifies that firmware
downloaded failed to [image1|image2|boot image]. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.30 |
bt2SwTempReturnThresholdA bt2SwTempReturnThreshold trap signifies that the
switch temperature has returned below maximum safety limits. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.31 |
bt2SwFanFailureA bt2SwFanFailure trap signifies that the
fan failure has been detected. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.32 |
bt2SwFanFailureFixedA bt2SwFanFailureFixed trap signifies that the
fan failure has been fixed. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.33 |
bt2SwUfdfoLtMFailureA bt2SwUfdfoLtMFailure trap signifies that a LtM link is down. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.34 |
bt2SwUfdfoLtMUPA bt2SwUfdfoLtMUP trap signifies that a LtM link is up. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.35 |
bt2SwUfdfoGlobalEnaA bt2SwUfdfoGlobalEna trap signifies that Global UFD is enabled. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.36 |
bt2SwUfdfoGlobalDisA bt2SwUfdfoGlobalDis trap signifies that Global UFD is disabled. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.37 |
bt2SwUfdfoLtDAutoEnaA bt2SwUfdfoLtDAutoEna trap signifies that a LtD link is Auto Enabled. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.38 |
bt2SwUfdfoLtDAutoDisA bt2SwUfdfoLtDAutoDis trap signifies that a LtD link is Auto Disabled. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.39 |
bt2SwCubeInsertedA Cube was inserted. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.40 |
bt2SwCubeRemovedA Cube was removed. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.41 |
bt2SwStgNewRootA bt2SwStgNewRoot trap signifies that the bridge has become the new root of the STG. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.42 |
bt2SwCistNewRootA bt2SwCistNewRoot trap signifies that the bridge has become the new root of the CIST. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.43 |
bt2SwStgTopologyChangedA bt2SwStgTopologyChanged trap signifies that there was a STG topology change. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.44 |
bt2SwCistTopologyChangedA bt2SwCistTopologyChanged trap signifies that there was a CIST topology change. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.45 |
bt2SwHotlinksMasterUpA bt2SwHotlinksMasterUp trap signifies that the Master interface is active. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.46 |
bt2SwHotlinksMasterDnA bt2SwHotlinksMasterDn trap signifies that the Master interface is not active. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.47 |
bt2SwHotlinksBackupUpA bt2SwHotlinksBackupUp trap signifies that the Backup interface is active. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.48 |
bt2SwHotlinksBackupDnA bt2SwHotlinksBackupDn trap signifies that the Backup interface is not active. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.49 |
bt2SwHotlinksNoneA bt2SwHotlinksNone trap signifies that there are no active interfaces. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.0.50 |
bt2SwTrapDisplayStringTemporary string object used to store information being sent
in an Bladetype2 Switch trap.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.1.2.7.1000 |