Home/Catalog/BLADETYPE2-SWITCH-MIB

BLADETYPE2-SWITCH-MIB

AI MIB Summary

The BLADETYPE2-SWITCH-MIB module facilitates the monitoring and configuration of blade switch hardware parameters, including interface status, port statistics, and system operational states. It provides the necessary SNMP objects to retrieve real-time performance metrics and manage the general configuration settings of the switch infrastructure.

The MIB module for the general switch configuration and information .
Main OID:
agent.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1
444
Objects
Active
Status
4
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
BRIDGE-MIB
HP-SWITCH-PL-MIB

Objects

444 total
Object Name
agentThe MIB module for the general switch configuration and information .
MODULE-IDENTITY
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1
agentConfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1
agSystem
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1
agApplyConfigurationThis is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block. other(1) is returned when this object ie read.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.2
agSavePendingThis object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.3
agSaveConfigurationThis is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.4
agRevertThis is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. This action will copy the current_config to the new_config block. other(1) is returned when this object is read.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.5
agRevertApplyThis is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.6
agResetThis is an action object to reboot the switch. other(1) is returned always when read. The following values are writable: coldReset(2)... warmReset(3)...rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.7
agConfigForNxtResetThe configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup configuration block default(4)..default configuration blockrw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.8
agImageForNxtResetThe software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.9
agSoftwareVersionThe version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.10
agBootVerThe version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.11
agImage1VerThe version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.12
agImage2VerThe version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.13
agRtcDateThe date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.14
agRtcTimeThe time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.15
agLastSetErrorReasonThe error reason of the last SET failure.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.16
agCurCfgHttpServerPortThe TCP port number that the HTTP server is listening to in the current_configuration block.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.17
agNewCfgHttpServerPortThe TCP port number that the HTTP server is listening to in the new_configuration block.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.18
agCurCfgLoginBannerThe user defined login banner.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.19
agNewCfgLoginBannerThe user defined login banner.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.20
agCurCfgConsoleEnable or disable console output of syslog messages.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.23
agNewCfgConsoleEnable or disable console output of syslog messages.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.24
agCurCfgBootpEnable or disable the use of BootP, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.29
agNewCfgBootpEnable or disable the use of BootP, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.30
agSlotNumberIdentifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value has no meaning.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.31
agCurCfgSnmpTimeoutOnce SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.32
agNewCfgSnmpTimeoutOnce SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.33
agCurCfgTelnetServerPortThe TCP port number that the telnet server listens for telnet sessions.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.34
agNewCfgTelnetServerPortThe TCP port number that the telnet server listens for telnet sessions.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.35
agClearFlashDumpThis is an action object to clear the FLASH dump. ok(1) is returned when this object is read.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.36
agRackIdThe rack unique identifier.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.37
agChassisChassis serial number.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.38
agCurCfgTftpServerPortThe TCP port number that the TFTP server is listening to in the current_configuration block.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.39
agNewCfgTftpServerPortThe TCP port number that the TFTP server is listening to in the new_configuration block.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.40
agCurCfgHttpsServerPortThe TCP port number that the HTTPS server is listening to in the current_configuration block.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.49
agNewCfgHttpsServerPortThe TCP port number that the HTTPS server is listening to in the new_configuration block.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.50
agCurDaylightSavingsThe daylight savings location.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.51
agNewDaylightSavingsThe daylight savings location.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.52
agCurCfgIdleCLITimeoutSet idle CLI sessions timeout.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.53
agNewCfgIdleCLITimeoutSet idle CLI sessions timeout.rw
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.54
agCurCfgUfdTrapThe current status of the UFDFO SNMP trap.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.55
agNewCfgUfdTrapEnable or disable sending UFDFO SNMP trap.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.56
agCurBootNxtCliModeCurrent boot mode.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.64
agNewBootNxtCliModeNext cli boot mode.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.65
agCurCfgRemindersCurrent status of reminders feature.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.70
agNewCfgRemindersEnable or disable reminders feature.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.71
agPortConfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2
agPortTableMaxEntThe maximum number of rows in the port configuration host table.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.1
agPortCurCfgTableThe table of port configuration in the current_configuration block.
SEQUENCE OF AgPortCurCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2
agPortCurCfgTableEntryA row in the port table in the current_configuration block.
AgPortCurCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1
agPortCurCfgIndxThe index of the row in port configurations table.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.1
agPortCurCfgStateThis is the state of the port.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.2
agPortCurCfgVlanTagThis is VLAN tag state of the portro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.3
agPortCurCfgStpThis object is used to turn Spanning Tree on or off for the port.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.4
agPortCurCfgRmonThis object is used to turn RMON on or off on the port.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.5
agPortCurCfgPVIDThe default VLAN ID for the port.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.6
agPortCurCfgGigEthAutoNegThis object is used to turn the autonegotiation on or off for gigabit Ethernet connection.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.11
agPortCurCfgGigEthSpeedSelects the port speed for gigabit Ethernet connection.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.12
agPortCurCfgGigEthModeThis object is used to select port mode for gigabit Ethernet connection.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.13
agPortCurCfgGigEthFctlThis object is used to select port flow control for gigabit Ethernet connection.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.14
agPortCurCfgPortNameThe switch port name.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.15
agPortCurCfgLinkTrapIndicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.18
agPortCurCfgTagPVIDThis is PVID tag state of the portro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.19
agPortCurCfgMulticastThresholdCurrent status of the port's Multicast Threshold.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.20
agPortCurCfgMulticastThresholdRateCurrent port's Multicast Threshold Rate.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.21
agPortCurCfgBroadcastThresholdCurrent status of the port's Broadcast Threshold.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.22
agPortCurCfgBroadcastThresholdRateCurrent port's Broadcast Threshold Rate.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.23
agPortCurCfgDLFThresholdCurrent status of the port's Destination Lookup Fail Threshold.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.24
agPortCurCfgDLFThresholdRateCurrent port's Destination Lookup Fail Threshold Rate.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.25
agPortFiberCurCfgTableThe table of fiber port configuration in the current_configuration block.
SEQUENCE OF AgPortFiberCurCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2
agPortFiberCurCfgTableEntryA row in the fiber port table in the current_configuration block.
AgPortFiberCurCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1
agPortFiberCurCfgIndxThe index of the row in fiber port current configuration table.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.1
agPortFiberCurCfgTxCtrlThis is the state of the TX control.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.2
agPortFiberCurCfgTxPulseThis is the state of the TX pulse.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.3
agPortFiberCurCfgTxUpCurrent TX up time.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.4
agPortFiberCurCfgTxDnCurrent TX dn time.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.5
agPortNewCfgTableThe table of port configuration in the new_configuration block.
SEQUENCE OF AgPortNewCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3
agPortNewCfgTableEntryA row in the port configuration table in the new_configuration block.
AgPortNewCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1
agPortNewCfgIndxThe index of the row in port configurations table.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.1
agPortNewCfgStateThis is the state of the port.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.2
agPortNewCfgVlanTagThis is VLAN tag state of the portrw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.3
agPortNewCfgStpThis object is used to turn Spanning Tree on or off for the port.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.4
agPortNewCfgRmonThis object is used to turn RMON on or off on the port.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.5
agPortNewCfgPVIDThe default VLAN ID for the port.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.6
agPortNewCfgGigEthAutoNegThis object is used to turn the autonegotiation on or off for gigabit Ethernet connection.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.11
agPortNewCfgGigEthSpeedSelects the port speed for gigabit Ethernet connection.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.12
agPortNewCfgGigEthModeThis object is used to select port mode for gigabit Ethernet connection.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.13
agPortNewCfgGigEthFctlThis object is used to select port flow control for gigabit Ethernet connection.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.14
agPortNewCfgPortNameThe switch port name.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.15
agPortNewCfgLinkTrapIndicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.18
agPortNewCfgTagPVIDThis is PVID tag state of the portrw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.19
agPortNewCfgMulticastThresholdNew status of the port's Multicast Threshold.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.20
agPortNewCfgMulticastThresholdRateNew port's Multicast Threshold Rate.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.21
agPortNewCfgBroadcastThresholdNew status of the port's Broadcast Threshold.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.22
agPortNewCfgBroadcastThresholdRateNew port's Broadcast Threshold Rate.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.23
agPortNewCfgDLFThresholdNew status of the port's Destination Lookup Fail Threshold.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.24
agPortNewCfgDLFThresholdRateNew port's Destination Lookup Fail Threshold Rate.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.25
agPortFiberNewCfgTableThe table of fiber port configuration in the new_configuration block.
SEQUENCE OF AgPortFiberNewCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2
agPortFiberNewCfgTableEntryA row in the fiber port table in the new_configuration block.
AgPortFiberNewCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1
agPortFiberNewCfgIndxThe index of the row in fiber port new configuration table.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.1
agPortFiberNewCfgTxCtrlNew TX control.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.2
agPortFiberNewCfgTxPulseNew TX pulse.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.3
agPortFiberNewCfgTxUpNew TX up time.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.4
agPortFiberNewCfgTxDnNew TX dn time.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.5
agRadiusConfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3
radCurCfgPrimaryIpAddrThe IP address of the Primary RADIUS server.ro
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.1
radNewCfgPrimaryIpAddrThe IP address of the Primary RADIUS server.rw
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.2
radCurCfgSecondaryIpAddrThe IP address of the Secondary RADIUS server.ro
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.3
radNewCfgSecondaryIpAddrThe IP address of the Secondary RADIUS server.rw
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.4
radCurCfgPortSpecify the RADIUS port number.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.5
radNewCfgPortSpeicfy the RADIUS port number.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.6
radCurCfgTimeoutThe maximum number of seconds before resending authentication to RADIUS server.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.7
radNewCfgTimeoutThe maximum number of seconds before resending authentication to RADIUS server.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.8
radCurCfgRetriesNumber of retries to the RADIUS server.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.9
radNewCfgRetriesNumber of retries to the RADIUS server.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.10
radCurCfgStateEnable or disbale RADIUS authentication.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.11
radNewCfgStateEnable or disable RADIUS authentication.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.12
radCurCfgAuthenStringThe RADIUS authentication string.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.13
radNewCfgAuthenStringThe RADIUS authentication string.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.14
radCurCfgTelnetEnable or disbale RADIUS backdoor for telnet.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.15
radNewCfgTelnetEnable or disable RADIUS backdoor for telnet.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.16
radCurCfgAuthenSecondStringThe second RADIUS authentication string.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.17
radNewCfgAuthenSecondStringThe second RADIUS authentication string.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.18
radCurCfgSecBdEnable or disbale RADIUS secure backdoor for telnet.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.19
radNewCfgSecBdEnable or disable RADIUS secure backdoor for telnet.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.20
agNTP
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4
agCurCfgNTPServerThe NTP Server Address.ro
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.1
agNewCfgNTPServerThe NTP Server Address.rw
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.2
agCurCfgNTPResyncIntervalThe NTP Server resync interval in minutes.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.3
agNewCfgNTPResyncIntervalThe NTP Server resync interval in minutes.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.4
agCurCfgNTPTzoneHHMMThe NTP Server timezone offset from GMT formatted as (+/-)HH:MM.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.5
agNewCfgNTPTzoneHHMMThe NTP Server timezone offset from GMT formatted as (+/-)HH:MM. The valid range is from -12:59 to +12:59.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.6
agCurCfgNTPDlightEnable/disable daylight savings time.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.7
agNewCfgNTPDlightEnable/disable daylight savings time.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.8
agCurCfgNTPServiceEnable/disable NTP Service.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.9
agNewCfgNTPServiceEnable/disable NTP Service.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.10
agCurCfgNTPSecServerThe Secondary NTP Server Address.ro
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.11
agNewCfgNTPSecServerThe Secondary NTP Server Address.rw
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.12
agSyslog
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5
agCurCfgSyslogHostThe syslog host IP address, as currently configured in the current_configuration block.ro
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.1
agNewCfgSyslogHostThe syslog host IP address, in the new_configuration block.rw
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.2
agCurCfgSyslog2HostThe second syslog host IP address, as currently configured in the current_configuration block.ro
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.3
agNewCfgSyslog2HostThe second syslog host IP address, in the new_configuration block.rw
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.4
agCurCfgSyslogFacThe facility of syslog host in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.5
agNewCfgSyslogFacThe facility of syslog host in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.6
agCurCfgSyslog2FacThe facility of syslog2 host in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.7
agNewCfgSyslog2FacThe facility of syslogs host in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.8
agClrSyslogMsgsClears all current Syslog messages.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.9
agSyslogMsgTableMaxSizeThe maximum number of rows in the syslog message table.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.10
agSyslogMsgTableThe table of syslog messages.
SEQUENCE OF AgSyslogMsgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11
agSyslogMsgTableEntryA syslog message stored on the switch.
AgSyslogMsgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1
agSyslogMsgIndexThe syslog message table index.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1.1
agSyslogMessageThe syslog message.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1.2
agLog
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12
agNewCfgSyslogTrapConsoleEnable or disable console syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.1
agCurCfgSyslogTrapConsoleEnable or disable console syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.2
agNewCfgSyslogTrapSystemEnable or disable system level syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.3
agCurCfgSyslogTrapSystemEnable or disable system level syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.4
agNewCfgSyslogTrapMgmtEnable or disable management(flash, config, login) syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.5
agCurCfgSyslogTrapMgmtEnable or disable management(flash, config, login) syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.6
agNewCfgSyslogTrapCliEnable or disable CLI generated error syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.7
agCurCfgSyslogTrapCliEnable or disable CLI generated error syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.8
agNewCfgSyslogTrapStgEnable or disable spanning tree syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.9
agCurCfgSyslogTrapStgEnable or disable spanning tree syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.10
agNewCfgSyslogTrapVlanEnable or disable VLAN syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.11
agCurCfgSyslogTrapVlanEnable or disable VLAN syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.12
agNewCfgSyslogTrapSshEnable or disable SSH, RADIUS syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.19
agCurCfgSyslogTrapSshEnable or disable SSH, RADIUS syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.20
agNewCfgSyslogTrapVrrpEnable or disable VRRP syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.21
agCurCfgSyslogTrapVrrpEnable or disable VRRP syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.22
agNewCfgSyslogTrapNtpEnable or disable NTP syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.25
agCurCfgSyslogTrapNtpEnable or disable NTP syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.26
agNewCfgSyslogTrapIpEnable or disable IP related syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.31
agCurCfgSyslogTrapIpEnable or disable IP related syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.32
agNewCfgSyslogTrapWebEnable or disable WEBUI related syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.35
agCurCfgSyslogTrapWebEnable or disable WEBUI related syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.36
agNewCfgSyslogTrapOspfEnable or disable OSPF related syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.41
agCurCfgSyslogTrapOspfEnable or disable OSPF related syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.42
agNewCfgSyslogTrapRmonEnable or disable rmon related syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.45
agCurCfgSyslogTrapRmonEnable or disable rmon related syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.46
agNewCfgSyslogTrapUfdEnable or disable UFD related syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.47
agCurCfgSyslogTrapUfdEnable or disable UFD related syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.48
agNewCfgSyslogTrapCfgEnable or disable CFG related syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.49
agCurCfgSyslogTrapCfgEnable or disable CFG related syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.50
agNewCfgSyslogTrap8021xEnable or disable 802.1X protocol related syslog and SNMP trap, in the new_configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.51
agCurCfgSyslogTrap8021xEnable or disable 802.1X protocol related syslog and SNMP trap, as currently configured in the current_configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.52
agCurCfgSyslogSevThe severity of syslog host in the current configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.13
agNewCfgSyslogSevThe severity of syslog host in the new configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.14
agCurCfgSyslog2SevThe severity of syslog2 host in the current configuration block.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.15
agNewCfgSyslog2SevThe severity of syslogs host in the new configuration block.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.16
agTrapHost
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6
agTrapHostTableMaxEntThe maximum number of rows in the trap host table.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.1
agCurCfgTrapHostTableThe table of trap hosts which to send SNMP traps in the current_configuration block.
SEQUENCE OF AgCurCfgTrapHostEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2
agCurCfgTrapHostEntryA row in the trap host table in the current_configuration block.
AgCurCfgTrapHostEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1
agCurCfgTrapHostIndxThe index of the row in trap host table.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.1
agCurCfgTrapHostIpAddrThe IP address of a trap host.ro
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.2
agCurCfgTrapHostCommStringThe SNMP community string to use with the trap hostro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.3
agNewCfgTrapHostTableThe table of trap hosts which to send SNMP traps in the new_configuration block.
SEQUENCE OF AgNewCfgTrapHostEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3
agNewCfgTrapHostEntryA row in the trap host table in the new_configuration block.
AgNewCfgTrapHostEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1
agNewCfgTrapHostIndxThe index of the row in trap host table.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.1
agNewCfgTrapHostIpAddrThe IP address of a trap host.rw
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.2
agNewCfgTrapHostCommStringThe SNMP community string to use with the trap hostrw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.3
agTftp
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7
agTftpServerThe TFTP server IP address or domain name.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.1
agTftpImageWhether the image file should be loaded in image1 or image2 or boot in flash.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.2
agTftpImageFileNameThe image file name to be downloaded.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.3
agTftpCfgFileNameThe configuration file name.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.4
agTftpDumpFileNameThe file name for core dump.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.5
agTftpActionThis is an action object to perform various TFTP Get or Put functions. The TFTP sever is specified in agTftpServer object. img-get(2) - Download switch image from a specified image file (agTftpImageFileName) on the TFTP server to the destinated storage (agTftpImage). cfg-get(3) - Download switch configuration from a specified file (agTftpCfgFileName) on the TFTP server. cfg-put(4) - Upload switch configuration to a specified file (agTftpCfgFileName) on the TFTP server. dump-put(5)- Download switch core dump to a specified file (agTftpDumpFileName) on the TFTP server. img-put(7) - Upload specified switch image to a specified image file (agTftpImageFileName) on the TFTP server. tsdump-put(5)- Download switch core dump to a specified file (agTftpTSDumpFileName) on the TFTP server. other(1) is returned always when read.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.6
agTftpLastActionStatusThe recorded status of the previous TFTP activity.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.7
agTftpUserNameThe username for FTP server or blank for TFTP server.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.9
agTftpPasswordThe password for FTP server.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.10
agTftpTSDumpFileNameThe file name for TS dump.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.11
agApply
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8
agApplyPendingThis object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.1
agApplyConfigWhen this object is read the current state is returned. idle(3) indicates that there is no apply in progess. complete(5) indicates that the last apply operation is completed. Setting the value to apply(1), will write all the changes made since the last apply to the current configuration block. If the apply is successful this variable will return the state 'complete' else it will return 'failed'. In case of failure, to read the reason for failure use the agApplyTable.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.2
agApplyTableSizeThe number of strings in the apply table.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.4
agApplyTableThe table of URL path for URL load balancing in the current_config.
SEQUENCE OF AgApplyTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5
agApplyTableEntryInformation about an URL path for URL load balancing.
AgApplyTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1
agApplyIndexThe table index.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1.1
agApplyStringA string in the apply table.ro
OCTET STRING
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1.2
agTacacsConfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10
tacCurCfgPrimaryIpAddrThe IP address of the Primary TACACS+ server.ro
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.1
tacNewCfgPrimaryIpAddrThe IP address of the Primary TACACS+ server.rw
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.2
tacCurCfgSecondaryIpAddrThe IP address of the Secondary TACSACS server.ro
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.3
tacNewCfgSecondaryIpAddrThe IP address of the Secondary TACACS+ server.rw
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.4
tacCurCfgPortSpecify the TACACS+ port number.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.5
tacNewCfgPortSpecify the TACACS+ port number.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.6
tacCurCfgTimeoutThe maximum number of seconds before resending authentication to TACACS+ server.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.7
tacNewCfgTimeoutThe maximum number of seconds before resending authentication to TACACS+ server.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.8
tacCurCfgRetriesNumber of retries to the TACACS+ server.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.9
tacNewCfgRetriesNumber of retries to the TACACS+ server.rw
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.10
tacCurCfgStateEnable or disbale TACACS+ authentication.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.11
tacNewCfgStateEnable or disable TACACS+ authentication.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.12
tacCurCfgAuthenStringThe TACACS+ authentication string.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.13
tacNewCfgAuthenStringThe TACACS+ authentication string.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.14
tacCurCfgTelnetEnable or disbale TACACS+ backdoor for telnet.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.15
tacNewCfgTelnetEnable or disable TACACS+ backdoor for telnet.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.16
tacCurCfgAuthenSecondStringThe second TACACS+ authentication string.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.17
tacNewCfgAuthenSecondStringThe second TACACS+ authentication string.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.18
tacCurCfgSecBdEnable or disbale TACACS+ secure backdoor for telnet.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.23
tacNewCfgSecBdEnable or disable TACACS+ secure backdoor for telnet.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.24
tacCurCfgCmapEnable/Disable Tacacs+ new prividlege level maping.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.25
tacNewCfgCmapEnable/Disable Tacacs+ new prividlege level maping.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.26
agTacacsUserMapCurCfgTableThe table of tacacs+ user map current configuration.
SEQUENCE OF AgTacacsUserMapCurCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31
agTacacsUserMapCurCfgTableEntryA row in the tacacs+ user mapping table.
AgTacacsUserMapCurCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1
agTacacsUserMapCurCfgUIdThe current config remote privilege identifier.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1.1
agTacacsUserMapCurCfgMappingCurrent Tacacs+ user privilege mappings.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1.2
agTacacsUserMapNewCfgTableThe table of tacacs+ user map new configuration.
SEQUENCE OF AgTacacsUserMapNewCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32
agTacacsUserMapNewCfgTableEntryA row in the tacacs+ user mapping table.
AgTacacsUserMapNewCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1
agTacacsUserMapNewCfgUIdThe new config remote privilege identifier.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1.1
agTacacsUserMapNewCfgMappingSet new Tacacs+ user privilege mappings.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1.2
agMgmtNetConfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11
agMgmtNetTableMaxSizeThe maximum number of entries in the Management Network Table.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.1
agCurCfgMgmtNetTableThe table for Management Network definitions in the current configuration block.
SEQUENCE OF AgCurCfgMgmtNetEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2
agCurCfgMgmtNetEntryA row in the management network definition table.
AgCurCfgMgmtNetEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1
agCurCfgMgmtNetIndexThe index of the Management Network Definition table.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.1
agCurCfgMgmtNetSubnetThe Management Network Address in the current_configuration block.ro
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.2
agCurCfgMgmtNetMaskThe Management Network Mask in the current_configuration block.ro
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.3
agNewCfgMgmtNetTableThe table for Management Network definitions in the new configuration block.
SEQUENCE OF AgNewCfgMgmtNetEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3
agNewCfgMgmtNetEntryA row in the management network definition table.
AgNewCfgMgmtNetEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1
agNewCfgMgmtNetIndexThe index of the Management Network Definition table.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.1
agNewCfgMgmtNetSubnetThe Management Network Address in the new_configuration block.rw
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.2
agNewCfgMgmtNetMaskThe Management Network Mask in the new_configuration block.rw
IpAddress
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.3
agNewCfgMgmtNetDeleteBy setting the value to delete(2), the entire row is deleted.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.4
agAccess
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12
agAccessUserMaxUserIDThe maximum number of Users ID.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.1
agAccessUserCurCfgTableThe table of Access user configuration.
SEQUENCE OF AgAccessUserCurCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2
agAccessUserCurCfgTableEntryA row in the Access user configuration table.
AgAccessUserCurCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1
agAccessUserCurCfgUIdThe User identifier.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.1
agAccessUserCurCosThe user class of service.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.2
agAccessUserCurCfgNameThe user name.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.3
agAccessUserCurCfgPswdThe character string representing the user passworde.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.4
agAccessUserCurCfgStateEnable or disable a user.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.5
agAccessUserNewCfgTableThe table of Access user configuration.
SEQUENCE OF AgAccessUserNewCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3
agAccessUserNewCfgTableEntryA row in the Access user configuration table.
AgAccessUserNewCfgTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1
agAccessUserNewCfgUIdThe User identifier.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.1
agAccessUserNewCosThe user class of service.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.2
agAccessUserNewCfgNameThe user name.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.3
agAccessUserNewCfgPswdThe character string representing the user passworde.rw
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.4
agAccessUserNewCfgStateEnable or disable a user.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.5
agAccessUserNewCfgDeleteThis is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a Userrw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.6
agentStats
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2
pktStats
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1
pktStatsAllocsTotal number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.1
pktStatsFreesTotal number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.2
pktStatsAllocFailsTotal number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.3
pktStatsMediumsTotal number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.ro
Gauge32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.4
pktStatsJumbosTotal number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.ro
Gauge32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.5
pktStatsSmallsTotal number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.ro
Gauge32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.6
pktStatsMediumsHiWatermarkThe highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.7
pktStatsJumbosHiWatermarkThe highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.8
pktStatsSmallsHiWatermarkThe highest number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.9
mpCpuStats
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2
mpCpuStatsUtil1SecondThe utilization of MP CPU over 1 second. It shows the percentage.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2.1
mpCpuStatsUtil4SecondsThe utilization of MP CPU over 4 seconds. It shows the percentage.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2.2
mpCpuStatsUtil64SecondsThe utilization of MP CPU over 64 seconds. It shows the percentage.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2.3
portStats
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3
portStatsTableThe table of port statistics.
SEQUENCE OF PortStatsTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1
portStatsTableEntryA row in the port stats table.
PortStatsTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1
portStatsIndxThe port index.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.1
portStatsPhyIfInOctetsThe total number of octets received on the interface, including framing characters.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.2
portStatsPhyIfInUcastPktsThe number of subnetwork-unicast packets delivered to a higher-layer protocol.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.3
portStatsPhyIfInNUcastPktsThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.4
portStatsPhyIfInDiscardsThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.5
portStatsPhyIfInErrorsThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.6
portStatsPhyIfInUnknownProtosThe number of packets received via the interface which were discarded because of an unknown or unsupported protocol.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.7
portStatsPhyIfOutOctetsThe total number of octets transmitted out of the interface, including framing characters.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.8
portStatsPhyIfOutUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.9
portStatsPhyIfOutNUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.10
portStatsPhyIfOutDiscardsThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.11
portStatsPhyIfOutErrorsThe number of outbound packets that could not be transmitted because of errors.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.12
portStatsPhyIfOutQLenThe length of the output packet queue (in packets).ro
Gauge32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.13
portStatsPhyIfInBroadcastPktsThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.14
portStatsPhyIfOutBroadcastPktsThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.15
portStatsClearSetting this value to clear(1) clears the stats for this port.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.16
portStatsPhyIfInMulticastPktsThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.17
portStatsPhyIfOutMulticastPktsThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent.ro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.18
dot1xPortStatsTableThe table of 802.1x port statistics.
SEQUENCE OF Dot1xPortStatsTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2
dot1xPortStatsTableEntryA row in the 802.1x port stats table.
Dot1xPortStatsTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1
dot1xPortStatsIndxThe 802.1x port stats index.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.1
eapolFramesRxro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.2
eapolFramesTxro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.3
eapolStartFramesRxro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.4
eapolLogoffFramesRxro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.5
eapolRespIdFramesRxro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.6
eapolRespFramesRxro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.7
eapolReqIdFramesTxro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.8
eapolReqFramesTxro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.9
invalidEapolFramesRxro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.10
eapLengthErrorFramesRxro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.11
authEntersConnectingro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.12
authEapLogoffsWhileConnectingro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.13
authEntersAuthenticatingro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.14
authSuccessesWhileAuthenticatingro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.15
authTimeoutsWhileAuthenticatingro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.16
authFailWhileAuthenticatingro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.17
authReauthsWhileAuthenticatingro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.18
authEapStartsWhileAuthenticatingro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.19
authEapLogoffWhileAuthenticatingro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.20
authReauthsWhileAuthenticatedro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.21
authEapStartsWhileAuthenticatedro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.22
authEapLogoffWhileAuthenticatedro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.23
backendResponsesro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.24
backendAccessChallengesro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.25
backendOtherRequestsToSupplicantro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.26
backendNonNakResponsesFromSupplicantro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.27
backendAuthSuccessesro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.28
backendAuthFailsro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.29
lastEapolFrameVersionro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.30
lastEapolFrameSourcero
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.31
spStats
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.4
mgmtStats
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.5
ntpStats
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9
ntpPrimaryServerReqSentThe total number of NTP requests sent to Primary NTP Server.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.1
ntpPrimaryServerRespRcvdThe total number of NTP responces received from Primary NTP Server.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.2
ntpPrimaryServerUpdatesThe total number of NTP Updates by Primary NTP Server.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.3
ntpSecondaryServerReqSentThe total number of NTP requests sent to Secondary NTP Server.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.4
ntpSecondaryServerRespRcvdThe total number of NTP responces received from Secondary NTP Server.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.5
ntpSecondaryServerUpdatesThe total number of NTP Updates by Secondary NTP Server.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.6
ntpLastUpdateServerThe type of ntp server updated last time.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.7
ntpLastUpdateTimeThe last time updated by ntp server.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.8
ntpClearStatsSetting this value to clear(2) clears the stats for ntp.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.9
ntpSystemCurrentTimeThe current system time.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.10
aclPortStats
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10
aclPortStatsTableThe table of aclPort statistics.
SEQUENCE OF AclPortStatsTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1
aclPortStatsTableEntryA row in the aclPort stats table.
AclPortStatsTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1
aclPortStatsIndxThe aclPort index.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.1
aclPortStatsHitsTotal number of hits for this ACL entry on given portro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.2
aclPortClearStatsSetting this value to clear(2) clears the stats for the ACL.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.3
aclMeterPortStats
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11
aclMeterPortStatsTableThe table of aclMeterPort statistics.
SEQUENCE OF AclMeterPortStatsTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1
aclMeterPortStatsTableEntryA row in the aclMeterPort stats table.
AclMeterPortStatsTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1
aclMeterPortStatsIndxThe aclMeterPort index.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.1
aclMeterPortStatsHitsTotal number of hits for this ACL Meter entry on given portro
Counter32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.2
aclMeterPortClearStatsSetting this value to clear(2) clears the stats for the ACL meter.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.3
agentInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3
hardware
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1
hwPartNumberThe hardware part number of the Bladetype2 Switch.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.1
hwRevisionThe hardware revision. If the revision is not available, a zero length string should be returned.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.2
hwPowerSupplyStatusThe status of the internal power supply.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.3
hwSensor1TempThe temperature of the rear left sensor in degrees Celsius.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.4
hwInsertedCubeTypeThe inserted cube type.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.5
portInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2
portInfoTableThe table of port information.
SEQUENCE OF PortInfoTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1
portInfoTableEntryA row in the port information table.
PortInfoTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1
portInfoIndxThe port index.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.1
portInfoSpeedThe current operational speed of the port.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.2
portInfoModeThe current operational mode of the port.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.3
portInfoFlowCtrlThe current operational flow control of the port.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.4
portInfoPhyIfDescrA textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.ro
DisplayString
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.6
portInfoPhyIfTypeThe type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.7
portInfoPhyIfMtuThe size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.8
portInfoPhyIfPhysAddressThe interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.ro
PhysAddress (SNMPv2-TC)
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.9
portInfoPhyIfOperStatusThe current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.10
portInfoPhyIfLastChangeThe value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.11
swKeyInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.3
agDiff
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4
agDiffStateWhen this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation is completed. Setting the value to diff(1), will start a new diff operation Diff compares the new configuration with the current configuration and shows the pending configuration changes. Setting the value to flashdiff(1), will start a new diff operation. flashdiff compares new configuration with the flash configuration. To read the configuration changes use the agDiffTable once the state of this variable returns complete.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.2
agDiffTableSizeThe number of strings in the diff table.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.3
agDiffTableThe table of URL path for URL load balancing in the current_config.
SEQUENCE OF AgDiffTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4
agDiffTableEntryInformation about an URL path for URL load balancing.
AgDiffTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1
agDiffIndexThe table index.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1.1
agDiffStringA string in the diff table.ro
OCTET STRING
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1.2
agCfgDump
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5
agCfgDumpStateWhen this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation is completed. Setting the value to dump(1), will start a new dump operation Dump will show the current configuration. To read the configuration dump use the agCfgDumpTable once the state of this variable returns complete. Once the agCfgDumpTable is read the state should be set back to 'idle' which frees the dump buffer and others can issue a dump command via SNMP.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.2
agCfgDumpTableSizeThe number of strings in the dump table.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.3
agCfgDumpTableThe table of dump strings.
SEQUENCE OF AgCfgDumpTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4
agCfgDumpTableEntryAn entry in the dump table.
AgCfgDumpTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1
agCfgDumpIndexThe table index.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1.1
agCfgDumpStringA string in the dump table.ro
OCTET STRING
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1.2
mgmtInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.6
geaportInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7
geaportInfoTableThe table of gea port mapping.
SEQUENCE OF GeaportInfoTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1
geaportInfoTableEntryAn entry in the geaport table mapping.
GeaportInfoTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1
geaportInfoLogicalIndexThe logical port index.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.1
geaportInfoPortThe GEA Port (0-based).ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.2
geaportInfoUnitThe GEA Unit.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.3
ufdInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8
ufdInfoStateUplink Failure Detection State.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.1
ufdInfoLtMStatusLtM Status.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.2
ufdInfoLtMPortsThe LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtM 0 - The represented port does not belong to LtM.ro
OCTET STRING
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.3
ufdInfoLtMTrunksThe LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtM 0 - The represented trunk does not belong to LtM.ro
OCTET STRING
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.4
ufdInfoLtDStatusLtD status.ro
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.5
ufdInfoLtDPortsThe LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtD 0 - The represented port does not belong to LtD.ro
OCTET STRING
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.6
ufdInfoLtDTrunksThe LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtD 0 - The represented trunk does not belong to LtD.ro
INTEGER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.7
agentOper
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4
agPortOperTableThe table of port operations.
SEQUENCE OF AgPortOperTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1
agPortOperTableEntryA row in the port operations table.
AgPortOperTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1
portOperIdxThe port index.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.1
portOperStateEnable/Disable port.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.2
portOperRmonEnable/Disable RMON for port.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.3
portOperDot1xTableThe table of port operations.
SEQUENCE OF PortOperDot1xTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2
portOperDot1xTableEntryA row in the port 802.1x operation table.
PortOperDot1xTableEntry
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1
portOperDot1xIndxThe port index.ro
Integer32
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.1
portOperDot1xResetReinitialize 802.1x access control on port.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.2
portOperDot1xReauthInitiate reauthentication on port.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.3
agNTPOper
OBJECT IDENTIFIER
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.2
ntpOperSendReqAllows the user to send requests to the NTP server.rw
Enumeration
.1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.2.1
BLADETYPE2-SWITCH-MIB - SNMP MIB Reference | MIBs Explorer