BGP4-V2-MIB-JUNIPER
AI MIB Summary
The BGP4-V2-MIB-JUNIPER module enables monitoring of Juniper Networks devices running the Border Gateway Protocol version 4 by exposing standard BGP session states, neighbor relationships, routing table statistics, and protocol-specific counters for operational analysis and fault detection.
This MIB module defines management objects for the Border Gateway Protocol, Version 4.
Main OID:
jnxBgpM2.1.3.6.1.4.1.2636.5.1.1
264
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
264 total| Object Name |
|---|
jnxBgpM2This MIB module defines management objects for
the Border Gateway Protocol, Version 4. MODULE-IDENTITY .1.3.6.1.4.1.2636.5.1.1 |
jnxBgpM2BaseScalars OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1 |
jnxBgpM2BaseNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1.0 |
jnxBgpM2EstablishedThe BGP Established event is generated when
the BGP FSM enters the ESTABLISHED state. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.1.1.1.0.1 |
jnxBgpM2BackwardTransitionThe BGPBackwardTransition Event is generated
when the BGP FSM moves from a higher numbered
state to a lower numbered state. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.1.1.1.0.2 |
jnxBgpM2Version OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1.1 |
jnxBgpM2VersionTableTable of supported BGP versions. SEQUENCE OF JnxBgpM2VersionEntry .1.3.6.1.4.1.2636.5.1.1.1.1.1 |
jnxBgpM2VersionEntryEntry containing data on a given supported version
of the Border Gateway Protocol and the level of
support provided. It is expected that any agent
implementation supporting this MIB module will
report support for Version 4 of the Border Gateway
Protocol at the very minimum. JnxBgpM2VersionEntry .1.3.6.1.4.1.2636.5.1.1.1.1.1.1 |
jnxBgpM2VersionIndexThe version number of the BGP Protocol.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.1.1.1.1.1 |
jnxBgpM2VersionSupportedThis value is TRUE if this version of the BGP protocol
identified in 'jnxBgpM2VersionIndex' is supported. The absence
of a row for a particular jnxBgpM2VersionIndex indicates that
that jnxBgpM2VersionIndex protocol version number is not
supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.1.1.1.1.2 |
jnxBgpM2SupportedAuthentication OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1.2 |
jnxBgpM2SupportedAuthTableThe supported BGP authentication mechanisms. SEQUENCE OF JnxBgpM2SupportedAuthEntry .1.3.6.1.4.1.2636.5.1.1.1.2.1 |
jnxBgpM2SupportedAuthEntryEntry containing information whether a given BGP
authentication mechanism is supported by this
implementation. JnxBgpM2SupportedAuthEntry .1.3.6.1.4.1.2636.5.1.1.1.2.1.1 |
jnxBgpM2SupportedAuthCodeThe BGP authentication code.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.1.2.1.1.1 |
jnxBgpM2SupportedAuthValueThis value is TRUE if a given authentication method
is supported by the local implementation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.1.2.1.1.2 |
jnxBgpM2SupportedCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1.3 |
jnxBgpM2CapabilitySupportAvailableThis value is TRUE if capability support is
available and is enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.1.3.1 |
jnxBgpM2SupportedCapabilitiesTableTable of supported BGP-4 capabilities. SEQUENCE OF JnxBgpM2SupportedCapabilitiesEntry -- *** JNX *** .1.3.6.1.4.1.2636.5.1.1.1.3.2 |
jnxBgpM2SupportedCapabilitiesEntryInformation about supported capabilities indexed
by capability number. JnxBgpM2SupportedCapabilitiesEntry -- *** JNX *** .1.3.6.1.4.1.2636.5.1.1.1.3.2.1 |
jnxBgpM2SupportedCapabilityCodeIndex of supported capability. The index directly
corresponds with the BGP-4 Capability Advertisement
Capability Code.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.1.3.2.1.1 |
jnxBgpM2SupportedCapabilityThis value is True if this capability is supported,
False otherwise.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.1.3.2.1.2 |
jnxBgpM2AsSizeThe size of the AS value in this implementation.
The semantics of this are determined as per the
as-4bytes draft.ro Enumeration .1.3.6.1.4.1.2636.5.1.1.1.4 |
jnxBgpM2LocalAsThe local autonomous system number.
If the jnxBgpM2AsSize is twoOctet, then the range is
constrained to be 0-65535.ro InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.1.5 |
jnxBgpM2LocalIdentifierThe BGP Identifier of local system.
Current practice is trending away from this value being
treated as an IP address and more as a generic
identifier.ro JnxBgpM2Identifier .1.3.6.1.4.1.2636.5.1.1.1.6 |
jnxBgpM2BaseScalarExtensions OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1.7 |
jnxBgpM2BaseScalarNonCapExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1.7.1 |
jnxBgpM2BaseScalarRouteReflectExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1.7.1.2796 |
jnxBgpM2RouteReflectorThis value is TRUE if this implementation supports the
BGP Route Reflection Extension and is enabled as a
route reflector. If the BGP Route Reflection extension
is not supported this value must be FALSE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.1.7.1.2796.1 |
jnxBgpM2ClusterIdThe configured Cluster-ID of the BGP Speaker. This will
default to the BGP Speaker's JnxBgpM2Identifier if this
speaker is functioning as a route reflector and an
explicit Cluster-ID has not been configured.
A value of 0.0.0.0 will be present if Route Reflection is
not enabled.ro JnxBgpM2Identifier .1.3.6.1.4.1.2636.5.1.1.1.7.1.2796.2 |
jnxBgpM2BaseScalarASConfedExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1.7.1.3065 |
jnxBgpM2ConfederationRouterThis value is TRUE if this implementation supports the
BGP AS Confederations Extension and this router is
configured to be in a confederation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.1.7.1.3065.1 |
jnxBgpM2ConfederationIdThe local Confederation Identification Number.
This value will be zero (0) if this BGP Speaker is not
a confederation router.ro InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.1.7.1.3065.2 |
jnxBgpM2BaseScalarCapExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1.7.2 |
jnxBgpM2BaseScalarConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1.8 |
jnxBgpM2CfgBaseScalarStorageTypeThis object specifies the intended storage type for
all configurable base scalars.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.1.8.1 |
jnxBgpM2CfgLocalAsThe local autonomous system number.
If the jnxBgpM2AsSize is twoOctet, then the range is
constrained to be 0-65535.rw InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.1.8.2 |
jnxBgpM2CfgLocalIdentifierThe BGP Identifier of local system.
Current practice is trending away from this value being
treated as an IP address and more as a generic
identifier.rw JnxBgpM2Identifier .1.3.6.1.4.1.2636.5.1.1.1.8.3 |
jnxBgpM2CfgBaseScalarExtensions OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1.8.4 |
jnxBgpM2CfgBaseScalarNonCapExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1.8.4.1 |
jnxBgpM2CfgBaseScalarReflectorExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1.8.4.1.2796 |
jnxBgpM2CfgRouteReflectorThis value is set to true if this implementation will
be supporting route reflection.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.1.8.4.1.2796.1 |
jnxBgpM2CfgClusterIdThe configured Cluster-ID of the BGP Speaker. This will
default to the BGP Speaker's JnxBgpM2Identifier if this
speaker is functioning as a route reflector and an
explicit Cluster-ID has not been configured.
A value of 0.0.0.0 will be present if Route Reflection is
not enabled.rw JnxBgpM2Identifier .1.3.6.1.4.1.2636.5.1.1.1.8.4.1.2796.2 |
jnxBgpM2CfgBaseScalarASConfedExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1.8.4.1.3065 |
jnxBgpM2CfgConfederationRouterThis value is set to true if this implementation will be
supporting BGP AS Confederations.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.1.8.4.1.3065.1 |
jnxBgpM2CfgConfederationIdThe local Confederation Identification Number.
This value will be zero (0) if this BGP Speaker is not
a confederation router.rw InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.1.8.4.1.3065.2 |
jnxBgpM2CfgBaseScalarCapExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.1.8.4.2 |
jnxBgpM2Peer OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2 |
jnxBgpM2PeerData OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.1 |
jnxBgpM2PeerTableBGP peer table.
This table contains, one entry per remote BGP peer,
any information about the connections with the remote
BGP peers. SEQUENCE OF JnxBgpM2PeerEntry .1.3.6.1.4.1.2636.5.1.1.2.1.1 |
jnxBgpM2PeerEntryEntry containing information about the connection with
a remote BGP peer. JnxBgpM2PeerEntry .1.3.6.1.4.1.2636.5.1.1.2.1.1.1 |
jnxBgpM2PeerIdentifierThe BGP Identifier of this entry's remote BGP peer.
This entry should be 0.0.0.0 unless the jnxBgpM2PeerState is
in the OpenConfirm or the Established state.ro JnxBgpM2Identifier .1.3.6.1.4.1.2636.5.1.1.2.1.1.1.1 |
jnxBgpM2PeerStateThe remote BGP peer's FSM state.ro Enumeration .1.3.6.1.4.1.2636.5.1.1.2.1.1.1.2 |
jnxBgpM2PeerStatusWhether or not the BGP FSM for this remote peer is halted
or running. The BGP FSM for a remote peer is halted after
processing a Stop event. Likewise, it is in the running
state after a Start event.
The jnxBgpM2PeerState will generally be in the idle state when
the FSM is halted, although some extensions such as
Graceful Restart will leave the peer in the Idle state
but with the FSM running.ro Enumeration .1.3.6.1.4.1.2636.5.1.1.2.1.1.1.3 |
jnxBgpM2PeerConfiguredVersionThe configured version to originally start with this
remote peer. The BGP speaker may permit negotiation to a
lower version number of the protocol.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.1.1.1.4 |
jnxBgpM2PeerNegotiatedVersionThe negotiated version of BGP running between the two
peers.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.1.1.1.5 |
jnxBgpM2PeerLocalAddrTypeThe address family of the local end of the peering
session.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.2.1.1.1.6 |
jnxBgpM2PeerLocalAddrThe address of the local end of the peering session.ro InetAddress .1.3.6.1.4.1.2636.5.1.1.2.1.1.1.7 |
jnxBgpM2PeerLocalPortThe local port for the TCP connection between the BGP
peers.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.2.1.1.1.8 |
jnxBgpM2PeerLocalAsSome implementations of BGP can represent themselves
as multiple ASs. This is the AS that this peering
session is representing itself as to the remote peer.ro InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.2.1.1.1.9 |
jnxBgpM2PeerRemoteAddrTypeThe address family of the remote end of the peering
session.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.2.1.1.1.10 |
jnxBgpM2PeerRemoteAddrThe address of the remote end of the peering session.ro InetAddress .1.3.6.1.4.1.2636.5.1.1.2.1.1.1.11 |
jnxBgpM2PeerRemotePortThe remote port for the TCP connection between the BGP
peers. In the case of a transport for which the notion
of 'port' is irrelevant, an instance value of -1
should be returned by the agent for this object.
Note that the objects jnxBgpM2PeerLocalAddr,
jnxBgpM2PeerLocalPort, jnxBgpM2PeerRemoteAddr and
jnxBgpM2PeerRemotePort provide the appropriate reference to
the standard MIB TCP connection table. or even the ipv6
TCP MIB as in rfc2452.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.2.1.1.1.12 |
jnxBgpM2PeerRemoteAsThe remote autonomous system number.ro InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.2.1.1.1.13 |
jnxBgpM2PeerIndexThis value is a unique index for the remote peer entry
in the jnxBgpM2PeerTable. It is assigned by the agent
at the point of creation of the jnxBgpM2PeerTable row
entry. While its value is guaranteed to be unique at
any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of jnxBgpM2PeerIndex row instance values across rows of
the jnxBgpM2PeerTable. It is used to provide an index
structure for other tables whose data is logically
per-peer.
For explicitly configured peers, this value will remain
consistent until this row is deleted by deleting the
configured peers. Unconfigured peers will generate
a monotonically increasing number when a BGP FSM is
built to process the peering session. Values in the
jnxBgpM2PeerTable and other tables utilizing jnxBgpM2PeerIndex
are expected to remain in existence for an arbitrary
time after the unconfigured peer has been deleted
in order to allow management applications to extract
useful management information for those peers. Thus,
an unconfigured peer using the same indices as the
jnxBgpM2PeerTable that comes up while this row still
exists will re-utilize the same row.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.1.1.1.14 |
jnxBgpM2PeerRoutingInstanceRouting instance index.ro Unsigned32 -- *** JNX *** .1.3.6.1.4.1.2636.5.1.1.2.1.1.1.15 |
jnxBgpM2PeerErrors OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.2 |
jnxBgpM2PeerErrorsTableOn a per peer basis, this table reflects the last
protocol-defined error encountered and reported on
the peer session. If no entry for a given peer,
by its jnxBgpM2PeerIndex, exists in this table, then no
such errors have been observed, reported, and
recorded on the session. SEQUENCE OF JnxBgpM2PeerErrorsEntry .1.3.6.1.4.1.2636.5.1.1.2.2.1 |
jnxBgpM2PeerErrorsEntryEach entry contains information about errors sent
and received for a particular BGP peer. JnxBgpM2PeerErrorsEntry .1.3.6.1.4.1.2636.5.1.1.2.2.1.1 |
jnxBgpM2PeerLastErrorReceivedThe last error code and subcode received by this BGP
Speaker via a NOTIFICATION message for this peer.
If no error has occurred, this field is zero.
Otherwise, the first byte of this two byte
OCTET STRING contains the error code, and the second
byte contains the subcode.ro OCTET STRING .1.3.6.1.4.1.2636.5.1.1.2.2.1.1.1 |
jnxBgpM2PeerLastErrorSentThe last error code and subcode sent by this BGP
Speaker via a NOTIFICATION message to this peer.
If no error has occurred, this field is zero.
Otherwise, the first byte of this two byte
OCTET STRING contains the error code, and the second
byte contains the subcode.ro OCTET STRING .1.3.6.1.4.1.2636.5.1.1.2.2.1.1.2 |
jnxBgpM2PeerLastErrorReceivedTimeThe timestamp that the last NOTIFICATION was received from
this peer.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2636.5.1.1.2.2.1.1.3 |
jnxBgpM2PeerLastErrorSentTimeThe timestamp that the last NOTIFICATION was sent to
this peer.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2636.5.1.1.2.2.1.1.4 |
jnxBgpM2PeerLastErrorReceivedTextThis object contains an implementation specific
explanation of the error that was reported.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2636.5.1.1.2.2.1.1.5 |
jnxBgpM2PeerLastErrorSentTextThis object contains an implementation specific
explanation of the error that is being reported.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2636.5.1.1.2.2.1.1.6 |
jnxBgpM2PeerLastErrorReceivedDataThe last error code's data seen by this peer.ro OCTET STRING .1.3.6.1.4.1.2636.5.1.1.2.2.1.1.7 |
jnxBgpM2PeerLastErrorSentDataThe last error code's data sent to this peer.ro OCTET STRING .1.3.6.1.4.1.2636.5.1.1.2.2.1.1.8 |
jnxBgpM2PeerAuthentication OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.3 |
jnxBgpM2PeerAuthTableBGP peer authentication table.
This table contains, one entry per BGP peer,
information about the authentication with BGP peers. SEQUENCE OF JnxBgpM2PeerAuthEntry .1.3.6.1.4.1.2636.5.1.1.2.3.1 |
jnxBgpM2PeerAuthEntryEntry containing information about the authentication
with a BGP peer. JnxBgpM2PeerAuthEntry .1.3.6.1.4.1.2636.5.1.1.2.3.1.1 |
jnxBgpM2PeerAuthSentThe local peer has sent authentication information
to the remote peer in the BGP Authentication field.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.2.3.1.1.1 |
jnxBgpM2PeerAuthSentCodeThe code of the authentication information sent to
the remote peer.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.3.1.1.2 |
jnxBgpM2PeerAuthSentValueThe payload of the authentication information
from the remote peer.ro OCTET STRING .1.3.6.1.4.1.2636.5.1.1.2.3.1.1.3 |
jnxBgpM2PeerAuthRcvdThe local peer has received authentication information
from the remote peer in the BGP Authentication field.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.2.3.1.1.4 |
jnxBgpM2PeerAuthRcvdCodeThe code of the authentication information received from
the remote peer.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.3.1.1.5 |
jnxBgpM2PeerAuthRcvdValueThe payload of the authentication information from
the remote peer.ro OCTET STRING .1.3.6.1.4.1.2636.5.1.1.2.3.1.1.6 |
jnxBgpM2PeerTimers OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.4 |
jnxBgpM2PeerEventTimesTableA table reporting the per-peering session amount
of time elapsed and update events since the peering
session advanced into the Established state. SEQUENCE OF JnxBgpM2PeerEventTimesEntry .1.3.6.1.4.1.2636.5.1.1.2.4.1 |
jnxBgpM2PeerEventTimesEntryEach row contains a set of statistics about time
spent and events encountered in the peer session
Established state. JnxBgpM2PeerEventTimesEntry .1.3.6.1.4.1.2636.5.1.1.2.4.1.1 |
jnxBgpM2PeerFsmEstablishedTimeThis timer indicates how long (in seconds) this
peer has been in the Established state or how long
since this peer was last in the Established state.
It is set to zero when a new peer is configured or
the router is booted.ro Gauge32 .1.3.6.1.4.1.2636.5.1.1.2.4.1.1.1 |
jnxBgpM2PeerInUpdatesElapsedTimeElapsed time in seconds since the last BGP UPDATE
message was received from the peer. Each time
jnxBgpM2PeerInUpdates is incremented, the value of this
object is set to zero (0). This value shall also be
zero (0) when the peer is not in the Established statero Gauge32 .1.3.6.1.4.1.2636.5.1.1.2.4.1.1.2 |
jnxBgpM2PeerConfiguredTimersTablePer peer management data on BGP session timers. SEQUENCE OF JnxBgpM2PeerConfiguredTimersEntry .1.3.6.1.4.1.2636.5.1.1.2.4.2 |
jnxBgpM2PeerConfiguredTimersEntryEach entry corresponds to the current state of
BGP timers on a given peering session. JnxBgpM2PeerConfiguredTimersEntry .1.3.6.1.4.1.2636.5.1.1.2.4.2.1 |
jnxBgpM2PeerConnectRetryIntervalTime interval in seconds for the ConnectRetry
timer. The suggested value for this timer is 120
seconds.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.4.2.1.1 |
jnxBgpM2PeerHoldTimeConfiguredTime interval in seconds for the Hold Time configured
for this BGP speaker with this peer. This value
is placed in an OPEN message sent to this peer by
this BGP speaker, and is compared with the Hold
Time field in an OPEN message received from the
peer when determining the Hold Time (jnxBgpM2PeerHoldTime)
with the peer. This value must not be less than
three seconds if it is not zero (0) in which case
the Hold Time is NOT to be established with the
peer. The suggested value for this timer is 90
seconds.ro Unsigned32 ( 0 | 3..65535 ) .1.3.6.1.4.1.2636.5.1.1.2.4.2.1.2 |
jnxBgpM2PeerKeepAliveConfiguredTime interval in seconds for the KeepAlive timer
configured for this BGP speaker with this peer.
The value of this object will only determine the
KEEPALIVE messages frequency relative to the value
specified in jnxBgpM2PeerHoldTimeConfigured; the actual
time interval for the KEEPALIVE messages is indicated
by jnxBgpM2PeerKeepAlive. A reasonable maximum value
for this timer would be configured to be one third
of that of jnxBgpM2PeerHoldTimeConfigured.
If the value of this object is zero (0), no
periodical KEEPALIVE messages are sent to the peer
after the BGP connection has been established.
The suggested value for this timer is 30 seconds.ro Unsigned32 ( 0 | 1..21845 ) .1.3.6.1.4.1.2636.5.1.1.2.4.2.1.3 |
jnxBgpM2PeerMinASOrigIntervalTime interval in seconds for the MinASOriginationInterval
timer. The suggested value for this timer is 15
seconds.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.4.2.1.4 |
jnxBgpM2PeerMinRouteAdverIntervalTime interval in seconds for the
MinRouteAdvertisementInterval timer. The suggested
value for this timer is 30 seconds.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.4.2.1.5 |
jnxBgpM2PeerNegotiatedTimersTableCurrent values of per-peer timers which can be
dynamically set in the jnxBgpM2PeerConfiguredTimersTable.
Values reflected in this table are the current
operational values, after negotiation from values
derived from initial configuration or last set from
jnxBgpM2PeerConfiguredTimersTable row instances. SEQUENCE OF JnxBgpM2PeerNegotiatedTimersEntry .1.3.6.1.4.1.2636.5.1.1.2.4.3 |
jnxBgpM2PeerNegotiatedTimersEntryEach entry reflects a value of the currently
operational, negotiated timers as reflected in the
JnxBgpM2PeerNegotiatedTimersEntry. JnxBgpM2PeerNegotiatedTimersEntry .1.3.6.1.4.1.2636.5.1.1.2.4.3.1 |
jnxBgpM2PeerHoldTimeThe value of this object is calculated by this BGP
Speaker as being;
zero (0) - if this was the value sent by the peer and
this value is permitted by this BGP Speaker. In this
case, no keepalive messages are sent and the Hold Timer
is not set.
At least three (3). This value is the smaller of
the value sent by this peer in the OPEN message and
jnxBgpM2PeerHoldTimeConfigured for this peer.
This value is only defined when the peering session is
in the Established state.ro Unsigned32 ( 0 | 3..65535 ) .1.3.6.1.4.1.2636.5.1.1.2.4.3.1.1 |
jnxBgpM2PeerKeepAliveTime interval in seconds for the KeepAlive timer
established with the peer. The value of this object
is calculated by this BGP speaker such that, when
compared with jnxBgpM2PeerHoldTime, it has the same
proportion as what jnxBgpM2PeerKeepAliveConfigured has
when compared with jnxBgpM2PeerHoldTimeConfigured. If
the value of this object is zero (0), it indicates
that the KeepAlive timer has not been established
with the peer, or, the value of
jnxBgpM2PeerKeepAliveConfigured is zero (0).
This value is only defined when the peering session is
in the Established state.ro Unsigned32 ( 0 | 1..21845 ) .1.3.6.1.4.1.2636.5.1.1.2.4.3.1.2 |
jnxBgpM2PeerCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.5 |
jnxBgpM2PeerCapsAnnouncedTableThis table contains the capabilities
that are supported for a given peer. SEQUENCE OF JnxBgpM2PeerCapsAnnouncedEntry .1.3.6.1.4.1.2636.5.1.1.2.5.1 |
jnxBgpM2PeerCapsAnnouncedEntryThese entries are keyed by a BGP-4 peer remote
address and the BGP Capability Code JnxBgpM2PeerCapsAnnouncedEntry .1.3.6.1.4.1.2636.5.1.1.2.5.1.1 |
jnxBgpM2PeerCapAnnouncedCodeThe BGP Capability Advertisement Capability Code.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.5.1.1.1 |
jnxBgpM2PeerCapAnnouncedIndexMultiple instances of a given capability may be sent
bgp a BGP speaker. This variable is used to index them.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.5.1.1.2 |
jnxBgpM2PeerCapAnnouncedValueThe value of the announced capability.ro OCTET STRING .1.3.6.1.4.1.2636.5.1.1.2.5.1.1.3 |
jnxBgpM2PeerCapsReceivedTableThis table contains the capabilities
that are supported for a given peer. SEQUENCE OF JnxBgpM2PeerCapsReceivedEntry -- *** JNX *** .1.3.6.1.4.1.2636.5.1.1.2.5.2 |
jnxBgpM2PeerCapsReceivedEntryThese entries are keyed by a BGP-4 peer remote
address and the BGP Capability Code JnxBgpM2PeerCapsReceivedEntry -- *** JNX *** .1.3.6.1.4.1.2636.5.1.1.2.5.2.1 |
jnxBgpM2PeerCapReceivedCodeThe BGP Capability Advertisement Capability Code.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.5.2.1.1 |
jnxBgpM2PeerCapReceivedIndexMultiple instances of a given capability may be sent
bgp a BGP speaker. This variable is used to index them.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.5.2.1.2 |
jnxBgpM2PeerCapReceivedValueThe value of the announced capability.ro OCTET STRING .1.3.6.1.4.1.2636.5.1.1.2.5.2.1.3 |
jnxBgpM2PeerCounters OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.6 |
jnxBgpM2PeerCountersTableThe counters associated with a BGP Peer. SEQUENCE OF JnxBgpM2PeerCountersEntry .1.3.6.1.4.1.2636.5.1.1.2.6.1 |
jnxBgpM2PeerCountersEntryEach entry contains counters of message transmissions
and FSM transitions for a given BGP Peering session. JnxBgpM2PeerCountersEntry .1.3.6.1.4.1.2636.5.1.1.2.6.1.1 |
jnxBgpM2PeerInUpdatesThe number of BGP UPDATE messages received on this
connection. This object should be initialized to zero
(0) when the connection is established.ro Counter32 .1.3.6.1.4.1.2636.5.1.1.2.6.1.1.1 |
jnxBgpM2PeerOutUpdatesThe number of BGP UPDATE messages transmitted on this
connection. This object should be initialized to zero
(0) when the connection is established.ro Counter32 .1.3.6.1.4.1.2636.5.1.1.2.6.1.1.2 |
jnxBgpM2PeerInTotalMessagesThe total number of messages received from the remote
peer on this connection. This object should be
initialized to zero when the connection is established.ro Counter32 .1.3.6.1.4.1.2636.5.1.1.2.6.1.1.3 |
jnxBgpM2PeerOutTotalMessagesThe total number of messages transmitted to the remote
peer on this connection. This object should be
initialized to zero when the connection is established.ro Counter32 .1.3.6.1.4.1.2636.5.1.1.2.6.1.1.4 |
jnxBgpM2PeerFsmEstablishedTransThe total number of times the BGP FSM
transitioned into the established state
for this peer.ro Counter32 .1.3.6.1.4.1.2636.5.1.1.2.6.1.1.5 |
jnxBgpM2PrefixCountersTableAdditional per-peer, per AFI SAFI counters for prefixes SEQUENCE OF JnxBgpM2PrefixCountersEntry .1.3.6.1.4.1.2636.5.1.1.2.6.2 |
jnxBgpM2PrefixCountersEntryEntry containing information about a bgp-peers prefix
counters. JnxBgpM2PrefixCountersEntry .1.3.6.1.4.1.2636.5.1.1.2.6.2.1 |
jnxBgpM2PrefixCountersAfiThe AFI index of the per-peer, per prefix countersro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.2.6.2.1.1 |
jnxBgpM2PrefixCountersSafiThe SAFI index of the per-peer, per prefix countersro JnxBgpM2Safi .1.3.6.1.4.1.2636.5.1.1.2.6.2.1.2 |
jnxBgpM2PrefixInPrefixesThe number of prefixes received from a peer and are
stored in the Adj-Ribs-In for that peer.ro Gauge32 .1.3.6.1.4.1.2636.5.1.1.2.6.2.1.7 |
jnxBgpM2PrefixInPrefixesAcceptedThe number of prefixes for a peer that are installed
in the Adj-Ribs-In and are eligible to become active
in the Loc-Rib.ro Gauge32 .1.3.6.1.4.1.2636.5.1.1.2.6.2.1.8 |
jnxBgpM2PrefixInPrefixesRejectedThe number of prefixes for a peer that are installed
in the Adj-Ribs-In and are NOT eligible to become active
in the Loc-Rib.ro Gauge32 .1.3.6.1.4.1.2636.5.1.1.2.6.2.1.9 |
jnxBgpM2PrefixOutPrefixesThe number of prefixes for a peer that are installed
in that peers Adj-Ribs-Out.ro Gauge32 .1.3.6.1.4.1.2636.5.1.1.2.6.2.1.10 |
jnxBgpM2PrefixInPrefixesActiveThe number of prefixes for a peer that are installed
in the Adj-Ribs-In and are the active route
in the Loc-Rib.ro Gauge32 .1.3.6.1.4.1.2636.5.1.1.2.6.2.1.11 |
jnxBgpM2PeerExtensions OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.7 |
jnxBgpM2PeerNonCapExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.7.1 |
jnxBgpM2PeerRouteReflectionExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.7.1.2796 |
jnxBgpM2PeerReflectorClientTableTable of route reflection client settings on a per-peer
basis. SEQUENCE OF JnxBgpM2PeerReflectorClientEntry .1.3.6.1.4.1.2636.5.1.1.2.7.1.2796.1 |
jnxBgpM2PeerReflectorClientEntryEntry containing data on a per-peer basis on whether
the peer is configured as a route reflector client. JnxBgpM2PeerReflectorClientEntry .1.3.6.1.4.1.2636.5.1.1.2.7.1.2796.1.1 |
jnxBgpM2PeerReflectorClientThis value indicates whether the given peer is a
reflector client of this router, or not. A value of
nonClient indicates that this peer is not a reflector
client. A value of client indicates that this peer is a
reflector client that is not fully meshed with other
reflector clients. A value of meshedClient indicates
that the peer is a reflector client and is fully meshed
with all other reflector clients.
This value must be nonClient (0) for BGP external peers.ro Enumeration .1.3.6.1.4.1.2636.5.1.1.2.7.1.2796.1.1.1 |
jnxBgpM2PeerASConfederationExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.7.1.3065 |
jnxBgpM2PeerConfedMemberTableTable of confederation member settings on a per-peer
basis. SEQUENCE OF JnxBgpM2PeerConfedMemberEntry .1.3.6.1.4.1.2636.5.1.1.2.7.1.3065.1 |
jnxBgpM2PeerConfedMemberEntryEntry containing data on a per-peer basis on whether
the peer is configured as a BGP confederation member. JnxBgpM2PeerConfedMemberEntry .1.3.6.1.4.1.2636.5.1.1.2.7.1.3065.1.1 |
jnxBgpM2PeerConfedMemberThis value indicates whether the given peer is in our
confederation or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.2.7.1.3065.1.1.1 |
jnxBgpM2PeerCapExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.7.2 |
jnxBgpM2PeerConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.8 |
jnxBgpM2CfgPeerAdminStatusTableTable containing rows for administratively starting and
stopping peering sessions. SEQUENCE OF JnxBgpM2CfgPeerAdminStatusEntry .1.3.6.1.4.1.2636.5.1.1.2.8.1 |
jnxBgpM2CfgPeerAdminStatusEntryEntry containing row for administratively starting and
stopping peers. JnxBgpM2CfgPeerAdminStatusEntry .1.3.6.1.4.1.2636.5.1.1.2.8.1.1 |
jnxBgpM2CfgPeerAdminStatusThis object allows the Manual Stop and Manual Start
events to be sent to an activated peering session.rw Enumeration .1.3.6.1.4.1.2636.5.1.1.2.8.1.1.1 |
jnxBgpM2CfgPeerNextIndexThis object contains the next appropriate value to
use as an index for creation of a row instance in
in the jnxBgpM2CfgPeerTable. If the number of available
entries in the jnxBgpM2CfgPeerTable is exhausted, a
retrieval value of this object instance will return
0. A value of 0 may also be returned if the agent
is otherwise incapable of jnxBgpM2CfgPeerTable row creation
at the time of jnxBgpM2CfgPeerNextIndex retrieval.ro Integer32 .1.3.6.1.4.1.2636.5.1.1.2.8.2 |
jnxBgpM2CfgPeerTableBGP configuration peer table.
This table allows the configuration of the parameters
for a session with a BGP peer.
+++wayne provide description of how config should be done
for a peer per table. SEQUENCE OF JnxBgpM2CfgPeerEntry .1.3.6.1.4.1.2636.5.1.1.2.8.3 |
jnxBgpM2CfgPeerEntryEntry containing information set up by a management
entity to configure a connection with a BGP peer. JnxBgpM2CfgPeerEntry .1.3.6.1.4.1.2636.5.1.1.2.8.3.1 |
jnxBgpM2CfgPeerConfiguredVersionThe configured version to originally start with
this peer. The BGP speaker may permit negotiation
to a lower version number of the protocol depending on the
set value of jnxBgpM2CfgAllowVersionNegotiation.rw Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.1 |
jnxBgpM2CfgAllowVersionNegotiationIf set to true, during session establishment with this
peer, negotiation to a version lower than that specified
in jnxBgpM2CfgPeerConfiguredVersion will be allowed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.2 |
jnxBgpM2CfgPeerLocalAddrTypeThe address family of the speakers of this BGP
session.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.3 |
jnxBgpM2CfgPeerLocalAddrThe address of the local end of the peering session.rw InetAddress .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.4 |
jnxBgpM2CfgPeerLocalAsAutonomous system represented to peer on peering
session initialization. Some implementations of
BGP can represent themselves as multiple ASes.
These implementations can set this to an alternate
autonomous system. If this object is set to zero
(0) at the point this row instance is set to active,
then the implementation will initialize this session
representing itself as the value of jnxBgpM2CfgLocalAs.rw InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.5 |
jnxBgpM2CfgPeerRemoteAddrTypeThe address family of the speakers of the remote BGP
session.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.6 |
jnxBgpM2CfgPeerRemoteAddrThe address of the remote end (destination address
of peer) for peering session.rw InetAddress .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.7 |
jnxBgpM2CfgPeerRemotePortThis is the remote port for the transport connection
between the BGP peers. In the case of a transport for
which the notion of port is irrelevant, the value of
-1 can be defaulted or set.rw Integer32 (-1 | 0..65535) .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.8 |
jnxBgpM2CfgPeerRemoteAsAutonomous system number of the remote peer.rw InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.9 |
jnxBgpM2CfgPeerEntryStorageTypeThis object type specifies the intended storage
type for the jnxBgpM2CfgPeerEntry row instance.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.10 |
jnxBgpM2CfgPeerErrorThis value indicates the current error status of
the row denoting the configured error status.
If this row is still under creation (has not been activated
jnxBgpM2CfgPeerRowEntryStatus), then this instance will be set to
not-activated (1).
At the point that the row is activated, jnxBgpM2CfgPeerError
will reflect the error status of the row data itself. If
there is another session already activated with the same
local and remote addresses as denoted by
{jnxBgpM2CfgPeerLocalAddrType, jnxBgpM2CfgPeerLocalAddr,
jnxBgpM2CfgPeerRemoteAddr, jnxBgpM2CfgPeerRemotePort}, then
the value of this will be set to
err-duplicate-peering-session (2).
If this row is associated with a peer session whose
initialization has been attempted, the value will be
set to activated (3) (and, jnxBgpM2PeerCfgPeerEntry will
be set to the row instance of the entry in the
jnxBgpM2PeerTable which reflects the state of the peering
session).
Note that this object only reflects the error as a
function of the attempted activation of this row as
containing data for a bgp peering session. The actual
state of the session at the point of any protocol exchange
or session state machine initiation is reflected in the
jnxBgpM2PeerTable row instance (as reflected through
jnxBgpM2CfgPeerPeerEntry) associated with this row instance.ro Enumeration .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.11 |
jnxBgpM2CfgPeerBgpPeerEntryUpon activation of the session data contained in this
row instance, this object points to an instance of a row
within the jnxBgpM2PeerTable reflecting the session in its
initializing or operational state. Retrieval of this
column instance will always yield a value of {0.0} unless
the session has successfully been activated (via
jnxBgpM2CfgPeerRowEntryStatus). Such row instances will always
have a value of jnxBgpM2CfgPeerError which is activated (3).ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.12 |
jnxBgpM2CfgPeerRowEntryStatusThis object type is used to control creation,
activation, and deletion of this row instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.13 |
jnxBgpM2CfgPeerIndexUniquely identifies an instance of a peer row, as
an element of configuration. Integer32 .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.14 |
jnxBgpM2CfgPeerStatusThis specifies the state of the peering session upon
activation. If disabled, the FSM is in the halted
state and no Automatic Start events are generated.
If enabled, the FSM is in the running state and
Automatic Start events may be generated.rw Enumeration .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.15 |
jnxBgpM2CfgPeerRoutingInstanceRouting instance index.rw Unsigned32 -- *** JNX *** .1.3.6.1.4.1.2636.5.1.1.2.8.3.1.16 |
jnxBgpM2CfgPeerAuthTableTable contain per peer configuration for BGP Authentication. SEQUENCE OF JnxBgpM2CfgPeerAuthEntry .1.3.6.1.4.1.2636.5.1.1.2.8.4 |
jnxBgpM2CfgPeerAuthEntryEntry containing information about a peer's BGP Authentication
configuration. JnxBgpM2CfgPeerAuthEntry .1.3.6.1.4.1.2636.5.1.1.2.8.4.1 |
jnxBgpM2CfgPeerAuthEnabledThis value is true if BGP Authentication is enabled for
this peer. This is the authentication mechanism
documented in the base BGP specification, not the MD5
session protection mechanism.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.2.8.4.1.1 |
jnxBgpM2CfgPeerAuthCodeThe authentication code for the BGP Authentication
mechanism.rw Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.8.4.1.2 |
jnxBgpM2CfgPeerAuthValueThe authentication payload for the BGP authentication
mechanism. This value has semantic meaning within
the context of the authentication code.rw OCTET STRING .1.3.6.1.4.1.2636.5.1.1.2.8.4.1.3 |
jnxBgpM2CfgPeerTimersTableTable for configuration of per-peer timers. SEQUENCE OF JnxBgpM2CfgPeerTimersEntry .1.3.6.1.4.1.2636.5.1.1.2.8.5 |
jnxBgpM2CfgPeerTimersEntryEntry containing per-peer timer configuration. JnxBgpM2CfgPeerTimersEntry .1.3.6.1.4.1.2636.5.1.1.2.8.5.1 |
jnxBgpM2CfgPeerConnectRetryIntervalTime interval in seconds for the ConnectRetry
timer. The suggested value for this timer is 120
seconds.rw Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.8.5.1.1 |
jnxBgpM2CfgPeerHoldTimeConfiguredTime interval in seconds for the Hold Time configured
for this BGP speaker with this peer. This value
is placed in an OPEN message sent to this peer by
this BGP speaker, and is compared with the Hold
Time field in an OPEN message received from the
peer when determining the Hold Time (jnxBgpM2PeerHoldTime)
with the peer. This value must not be less than
three seconds if it is not zero (0) in which case
the Hold Time is NOT to be established with the
peer. The suggested value for this timer is 90
seconds.rw Unsigned32 ( 0 | 3..65535 ) .1.3.6.1.4.1.2636.5.1.1.2.8.5.1.2 |
jnxBgpM2CfgPeerKeepAliveConfiguredTime interval in seconds for the KeepAlive timer
configured for this BGP speaker with this peer.
The value of this object will only determine the
KEEPALIVE messages frequency relative to the value
specified in jnxBgpM2PeerHoldTimeConfigured; the actual
time interval for the KEEPALIVE messages is indicated
by jnxBgpM2PeerKeepAlive. A reasonable maximum value
for this timer would be configured to be one third
of that of jnxBgpM2PeerHoldTimeConfigured.
If the value of this object is zero (0), no
periodical KEEPALIVE messages are sent to the peer
after the BGP connection has been established.
The suggested value for this timer is 30 seconds.rw Unsigned32 ( 0 | 1..21845 ) .1.3.6.1.4.1.2636.5.1.1.2.8.5.1.3 |
jnxBgpM2CfgPeerMinASOrigIntervalTime interval in seconds for the MinASOriginationInterval
timer. The suggested value for this timer is 15
seconds.rw Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.8.5.1.4 |
jnxBgpM2CfgPeerMinRouteAdverInterTime interval in seconds for the
MinRouteAdvertisementInterval timer. The suggested
value for this timer is 30 seconds.rw Unsigned32 .1.3.6.1.4.1.2636.5.1.1.2.8.5.1.5 |
jnxBgpM2CfgPeerExtensions OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.8.6 |
jnxBgpM2CfgPeerNonCapExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.8.6.1 |
jnxBgpM2CfgPeerRouteReflectionExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.8.6.1.2796 |
jnxBgpM2CfgPeerReflectorClientTableTable of route reflection client settings on a per-peer
basis. SEQUENCE OF JnxBgpM2CfgPeerReflectorClientEntry .1.3.6.1.4.1.2636.5.1.1.2.8.6.1.2796.1 |
jnxBgpM2CfgPeerReflectorClientEntryEntry containing data on a per-peer basis on whether
the peer is configured as a route reflector client. JnxBgpM2CfgPeerReflectorClientEntry .1.3.6.1.4.1.2636.5.1.1.2.8.6.1.2796.1.1 |
jnxBgpM2CfgPeerReflectorClientThis value indicates whether the given peer is a
reflector client of this router, or not. A value of
nonClient indicates that this peer is not a reflector
client. A value of client indicates that this peer is a
reflector client that is not fully meshed with other
reflector clients. A value of meshedClient indicates
that the peer is a reflector client and is fully meshed
with all other reflector clients.
This value must be nonClient (0) for BGP external peers.rw Enumeration .1.3.6.1.4.1.2636.5.1.1.2.8.6.1.2796.1.1.1 |
jnxBgpM2CfgPeerASConfederationExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.8.6.1.3065 |
jnxBgpM2CfgPeerConfedMemberTableTable of confederation member settings on a per-peer
basis. SEQUENCE OF JnxBgpM2CfgPeerConfedMemberEntry .1.3.6.1.4.1.2636.5.1.1.2.8.6.1.3065.1 |
jnxBgpM2CfgPeerConfedMemberEntryEntry containing data on a per-peer basis on whether
the peer is configured as a BGP confederation member. JnxBgpM2CfgPeerConfedMemberEntry .1.3.6.1.4.1.2636.5.1.1.2.8.6.1.3065.1.1 |
jnxBgpM2CfgPeerConfedMemberThis value indicates whether the given peer is in our
confederation or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.2.8.6.1.3065.1.1.1 |
jnxBgpM2CfgPeerCapExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.2.8.6.2 |
jnxBgpM2Rib OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.3 |
jnxBgpM2NlriTableThe BGP-4 Received Path Attribute Table contains
information about paths to destination networks
received from all BGP4 peers. Collectively, this
represents the Adj-Ribs-In. The route where
jnxBgpM2NlriBest is TRUE represents, for this NLRI,
the route that is installed in the LocRib from the
Adj-Ribs-In. SEQUENCE OF JnxBgpM2NlriEntry .1.3.6.1.4.1.2636.5.1.1.3.1 |
jnxBgpM2NlriEntryInformation about a path to a network. JnxBgpM2NlriEntry .1.3.6.1.4.1.2636.5.1.1.3.1.1 |
jnxBgpM2NlriIndexThis index allows for multiple instances of a base
prefix for a certain AFI SAFI from a given peer.
This is currently useful for two things:
1. Allowing for a peer in future implementations to
send more than a single route instance.
2. Allow for extensions which extend the NLRI field
to send the same prefix while utilizing other
extension specific information. An example of
this is RFC 3107 - Carrying MPLS labels in BGP.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.1.1.1 |
jnxBgpM2NlriAfiThe address family of the prefix for this NLRI.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.3.1.1.2 |
jnxBgpM2NlriSafiThe subsequent address family of the prefix for
this NLRIro JnxBgpM2Safi .1.3.6.1.4.1.2636.5.1.1.3.1.1.3 |
jnxBgpM2NlriPrefixAn IP address prefix in the Network Layer
Reachability Information field. This object
is an IP address containing the prefix with
length specified by
jnxBgpM2PathAttrAddrPrefixLen.
Any bits beyond the length specified by
jnxBgpM2PathAttrAddrPrefixLen are zeroed.ro InetAddress .1.3.6.1.4.1.2636.5.1.1.3.1.1.4 |
jnxBgpM2NlriPrefixLenLength in bits of the address prefix in
the Network Layer Reachability Information field.ro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.3.1.1.5 |
jnxBgpM2NlriBestAn indication of whether or not this route
was chosen as the best BGP4 route.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.3.1.1.6 |
jnxBgpM2NlriCalcLocalPrefThe degree of preference calculated by the
receiving BGP4 speaker for an advertised
route.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.1.1.7 |
jnxBgpM2PathAttrIndexThis value is a unique index for the per-NLRI entry
in the jnxBgpM2PeerAttrTable. It is assigned by the
agent at the point of creation of the jnxBgpM2PeerAttrTable
row entry. While its value is guaranteed to be unique
at any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of jnxBgpM2PeerAttrIndex row instance values across rows
of the jnxBgpM2PeerAttrTable. It is used to provide an
index structure for other tables whose data is logically
per-peer, per-NLRI.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.1.1.8 |
jnxBgpM2NlriOpaqueTypeThis object enumerates the type of the row that is
pointed to in the table row jnxBgpM2NlriOpaquePointer
instance, if jnxBgpM2NlriOpaquePointer is in fact not
a zero length. jnxBgpM2NlriOpaqueType is necessary since
the data referenced by jnxBgpM2NlriOpaquePointer is
opaque to BGP. For example, in the case of RFC 3107,
the label stack that is pointed to may occur in the
mplsLabelStackTable from the MPLS-LSR-MIB, and the
instance value of jnxBgpM2NlriOpaqueType would be
bgpMplsLabelStack(1).ro Enumeration .1.3.6.1.4.1.2636.5.1.1.3.1.1.9 |
jnxBgpM2NlriOpaquePointerPointer to a row that decomposes the data that is
opaque to the BGP MIB but is sent in the NLRI.
This RowPointer has zero (0) length data instance
if jnxBgpM2NlriOpaqueType is none.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.3.1.1.10 |
jnxBgpM2AdjRibsOutTableThis table contains on a per-peer basis one or more
routes from the jnxBgpM2NlriTable that have been
placed in this peer's Adj-Ribs-Out. SEQUENCE OF JnxBgpM2AdjRibsOutEntry .1.3.6.1.4.1.2636.5.1.1.3.2 |
jnxBgpM2AdjRibsOutEntryList of BGP routes that have been placed into a
peer's Adj-Ribs-Out. JnxBgpM2AdjRibsOutEntry .1.3.6.1.4.1.2636.5.1.1.3.2.1 |
jnxBgpM2AdjRibsOutIndexCertain extensions to BGP permit multiple instance of
a per afi, per safi prefix to be advertised to a peer.
This object allows the enumeration of them.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.2.1.1 |
jnxBgpM2AdjRibsOutRouteThis object points to the route in the jnxBgpM2NlriTable
that corresponds to the entry in the peer's
Adj-Rib-Out. Outgoing route maps are not
reflected at this point as those are part of the
Update-Send process.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.3.2.1.2 |
jnxBgpM2PathAttrCountThe number of entries in the jnxBgpM2PathAttrTable.ro Counter32 .1.3.6.1.4.1.2636.5.1.1.3.3 |
jnxBgpM2PathAttrTableProvides per advertised network-prefix attribute data,
as advertised over a peering session. SEQUENCE OF JnxBgpM2PathAttrEntry .1.3.6.1.4.1.2636.5.1.1.3.4 |
jnxBgpM2PathAttrEntryEach entry contains data about a given network
prefix, per-prefix and per-advertising peer. JnxBgpM2PathAttrEntry .1.3.6.1.4.1.2636.5.1.1.3.4.1 |
jnxBgpM2PathAttrOriginThe ultimate origin of the path information.ro Enumeration .1.3.6.1.4.1.2636.5.1.1.3.4.1.1 |
jnxBgpM2PathAttrNextHopAddrTypeThe address family of the address for
the border router that should be used
to access the destination network.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.3.4.1.2 |
jnxBgpM2PathAttrNextHopThe address of the border router that
should be used to access the destination
network. This address is the nexthop
address received in the UPDATE packet.
The address family of this object will be the
same as that of the prefix in this row.
Note that for RFC2545 style double nexthops,
this object will always contain the global scope
nexthop. jnxBgpM2LinkLocalNextHopTable will contain
the linklocal scope nexthop.
In the case that the mechanism documented in
draft-kato-bgp-ipv6-link-local-00.txt is used and
only a link local nexthop has been sent, ,
jnxBgpM2LinkLocalNextHopPresent will be false
and jnxBgpM2PathAttrNextHop will contain the link local
nexthop.ro InetAddress .1.3.6.1.4.1.2636.5.1.1.3.4.1.3 |
jnxBgpM2PathAttrMedPresentWhether or not the MED value is present.
If it is not present, the jnxBgpM2PathAttrMed
object has no useful value and should be set to 0.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.3.4.1.4 |
jnxBgpM2PathAttrMedThis metric is used to discriminate
between multiple exit points to an
adjacent autonomous system.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.4.1.5 |
jnxBgpM2PathAttrLocalPrefPresentWhether or not the LocalPref value is present.
If it is not present, the jnxBgpM2PathAttrLocalPref
object has no useful value and should be set to 0.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.3.4.1.6 |
jnxBgpM2PathAttrLocalPrefThe originating BGP4 speakers degree of
preference for an advertised route.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.4.1.7 |
jnxBgpM2PathAttrAtomicAggregateWhen this object is set to atomicAggregatePresent,
the ATOMIC_AGGREGATE Path Attribute is present
and indicates that the NLRI MUST NOT be made
more specific.ro Enumeration .1.3.6.1.4.1.2636.5.1.1.3.4.1.8 |
jnxBgpM2PathAttrAggregatorASThe AS number of the last BGP4 speaker that
performed route aggregation. A value of
zero (0) indicates the absence of this
attribute.
Note propagation of AS of zero is illegal in
the Internet.ro InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.3.4.1.9 |
jnxBgpM2PathAttrAggregatorAddrThe IP address of the last BGP4 speaker
that performed route aggregation. A
value of 0.0.0.0 indicates the absence
of this attribute.ro JnxBgpM2Identifier .1.3.6.1.4.1.2636.5.1.1.3.4.1.10 |
jnxBgpM2AsPathCalcLengthThis value represents the calculated length of the
AS Path according to the rules of the BGP specification.
This value is used in route selection.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.4.1.11 |
jnxBgpM2AsPathStringThis is a string depicting the autonomous system
path to this network which was received from the
peer which advertised it. The format of the string
is implementation-dependent, and should be designed
for operator readability.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2636.5.1.1.3.4.1.12 |
jnxBgpM2AsPathIndexThis value is a unique index for the decomposed AS Path
in the jnxBgpM2AsPathTable. It is assigned by the
agent at the point of creation of the jnxBgpM2AsPathTable
row entry. While its value is guaranteed to be unique
at any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of jnxBgpM2AsPathIndex row instance values across rows
of the jnxBgpM2AsPathTable.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.4.1.13 |
jnxBgpM2AsPath4byteTableThis table is present for BGP speakers that support
the AS 4byte specification and are functioning as
a router between 2-byte and 4-byte AS space. SEQUENCE OF JnxBgpM2AsPath4byteEntry .1.3.6.1.4.1.2636.5.1.1.3.5 |
jnxBgpM2AsPath4byteEntryEach row contains the information for the AS 4-byte
extension's NEW_AS_PATH and NEW_AGGREGATOR attributes. JnxBgpM2AsPath4byteEntry .1.3.6.1.4.1.2636.5.1.1.3.5.1 |
jnxBgpM2AsPath4bytePathPresentThis value may only be true if this BGP Speaker
is functioning as a router between ASs that
are in 2-byte and 4-byte AS space. If this
value is true, then the NEW_AS_PATH attributes
are present and the 4-byte versions of the
appropriate path attributes are in this row.
If this value is false, then the following values
will be present in the row:
jnxBgpM2PathAttrAggregatorAS - zero (0).
jnxBgpM2AsPathCalcLength - zero (0).
jnxBgpM2AsPathString - zero (0) length string.
jnxBgpM2AsPathIndex - zero (0).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.3.5.1.1 |
jnxBgpM2AsPath4byteAggregatorASThe NEW_AGGREGATOR AS number of the last BGP4 speaker
that performed route aggregation. A value of
zero (0) indicates the absence of this
attribute.
Note propagation of AS of zero is illegal in
the Internet.ro InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.3.5.1.2 |
jnxBgpM2AsPath4byteCalcLengthThis value represents the calculated length of the
NEW_AS_PATH according to the rules of the BGP specification.
This value is used in route selection.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.5.1.3 |
jnxBgpM2AsPath4byteStringThis is a string depicting the autonomous system
path to this network which was received from the
peer which advertised it. The format of the string
is implementation-dependent, and should be designed
for operator readability.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2636.5.1.1.3.5.1.4 |
jnxBgpM2AsPath4byteIndexThis value is a unique index for the decomposed AS Path
in the jnxBgpM2AsPathTable. It is assigned by the
agent at the point of creation of the jnxBgpM2AsPathTable
row entry. While its value is guaranteed to be unique
at any time, it is otherwise opaque to the management
application with respect to its value or the contiguity
of jnxBgpM2AsPathIndex row instance values across rows
of the jnxBgpM2AsPathTable.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.5.1.5 |
jnxBgpM2AsPathTableThe BGP-4 Path Attribute AS Path Table
contains the per network path (NLRI)
AS PATH data received from the
advertising BGP peer. SEQUENCE OF JnxBgpM2AsPathEntry .1.3.6.1.4.1.2636.5.1.1.3.6 |
jnxBgpM2AsPathEntryInformation about an AS path provided with a path to
a network. JnxBgpM2AsPathEntry .1.3.6.1.4.1.2636.5.1.1.3.6.1 |
jnxBgpM2AsPathSegmentIndexA per-AS path segment index. This will index a set of
autonomous systems in an AS path which are part
of the same sequence or set (as determined by
the row value of jnxBgpM2AsPathType, which
should be the same value for each jnxBgpM2AsPathTable
entry indexed by the same (jnxBgpM2PathAttrIndex,
jnxBgpM2AsPathIndex) pair).ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.6.1.1 |
jnxBgpM2AsPathElementIndexA per-AS element index. This will index a particular
AS within a sequence or set of autonomous systems in
an AS path.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.6.1.2 |
jnxBgpM2AsPathTypeThe type of sequence in which this asPath
was advertised as an attribute. Note that
all asPath row instances for a given (jnxBgpM2PathAttrIndex,
jnxBgpM2AsPathIndex) index pair will have their
jnxBgpM2AsPathType set to the same value.
The values for jnxBgpM2AsPathType are
interpreted as defined in the base BGP document
and the BGP AS Confederations document.ro Enumeration .1.3.6.1.4.1.2636.5.1.1.3.6.1.3 |
jnxBgpM2AsPathElementValueAn AS value for an AS the related NLRI traversed
in the propagation of its advertisement. This
value is to be interpreted in the context of the
sequence implied by jnxBgpM2AsPathIndex and
jnxBgpM2AsPathType (and, in sequence of the
other table rows with the same value of
jnxBgpM2PathAttrIndex and jnxBgpM2AsPathIndex).ro InetAutonomousSystemNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.1.1.3.6.1.4 |
jnxBgpM2PathAttrUnknownTableThe BGP-4 Path Attribute Unknown Table
contains the per network path (NLRI)
data on the path attributes advertised
with a route but not known to the local BGP implementation
or not otherwise capable of being returned from this agent.
The absence of row data for a given index value for
jnxBgpM2PathAttrIndex indicates a lack of such unknown
attribute information for the indicated network path
(as indexed by that jnxBgpM2PathAttrIndex value in the
jnxBgpM2PathAttrTable). SEQUENCE OF JnxBgpM2PathAttrUnknownEntry .1.3.6.1.4.1.2636.5.1.1.3.7 |
jnxBgpM2PathAttrUnknownEntryInformation about an unknown attribute
provided with a path to a network. JnxBgpM2PathAttrUnknownEntry .1.3.6.1.4.1.2636.5.1.1.3.7.1 |
jnxBgpM2PathAttrUnknownIndexAn integer index for a row in this table.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.7.1.1 |
jnxBgpM2PathAttrUnknownTypeThe attribute type advertised with this unknown
attribute by the peer.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.7.1.2 |
jnxBgpM2PathAttrUnknownValueValue of path attribute not understood
by the base BGP-4 document.
Octets beyond the maximum size, if any,
are not recorded by this row object.ro OCTET STRING .1.3.6.1.4.1.2636.5.1.1.3.7.1.3 |
jnxBgpM2PathAttrExtensions OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.3.8 |
jnxBgpM2PathAttrNonCapExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.3.8.1 |
jnxBgpM2PathAttrCommunityExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.3.8.1.1997 |
jnxBgpM2PathAttrCommTableThe BGP-4 Path Attribute Community Table
contains the per network path (NLRI)
data on the community membership advertised
with a route. The absence of row
data for a given index value for jnxBgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable). SEQUENCE OF JnxBgpM2PathAttrCommEntry .1.3.6.1.4.1.2636.5.1.1.3.8.1.1997.1 |
jnxBgpM2PathAttrCommEntryInformation about a community association
provided with a path to a network. JnxBgpM2PathAttrCommEntry .1.3.6.1.4.1.2636.5.1.1.3.8.1.1997.1.1 |
jnxBgpM2PathAttrCommIndexAn integer index for a row in this table.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.8.1.1997.1.1.1 |
jnxBgpM2PathAttrCommValueA value representing a community. There are certain
4-octet long values which could be returned in this
columnar row data that carry additional semantics.ro JnxBgpM2Community .1.3.6.1.4.1.2636.5.1.1.3.8.1.1997.1.1.2 |
jnxBgpM2LinkLocalNextHopTableTable of link local nexthops as sent by RFC 2545
for IPv6 BGP Speakers. SEQUENCE OF JnxBgpM2LinkLocalNextHopEntry .1.3.6.1.4.1.2636.5.1.1.3.8.1.2545 |
jnxBgpM2LinkLocalNextHopEntryEntry containing the link-local nexthops as sent
by a BGP speaker running RFC 2545 extensions for
double-nexthops. JnxBgpM2LinkLocalNextHopEntry .1.3.6.1.4.1.2636.5.1.1.3.8.1.2545.1 |
jnxBgpM2LinkLocalNextHopPresentThis value is TRUE if and only if the BGP
speaker is receiving IPv6 NLRI using the
RFC 2545 double nexthop convention and it
has received a link local scope nexthop in
addition to the global scope nexthop.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.1.1.3.8.1.2545.1.1 |
jnxBgpM2LinkLocalNextHopThis value contains an IPv6 link local address of
InetAddressType of type ipv6z. This value is only
present if jnxBgpM2LinkLocalNextHopPresent is true.ro InetAddress .1.3.6.1.4.1.2636.5.1.1.3.8.1.2545.1.2 |
jnxBgpM2PathAttrRouteReflectionExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.3.8.1.2796 |
jnxBgpM2PathAttrOriginatorIdTablePer prefix data pertinent to advertisement of a
network prefix through an originator. SEQUENCE OF JnxBgpM2PathAttrOriginatorIdEntry .1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.1 |
jnxBgpM2PathAttrOriginatorIdEntryEach entry contains data pertinent to a network
prefix as received through its originating BGP
route reflector. JnxBgpM2PathAttrOriginatorIdEntry .1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.1.1 |
jnxBgpM2PathAttrOriginatorIdThe Originator-ID identifying the router that initially
advertised this destination to a Route Reflector. A
value of 0.0.0.0 indicates the absence of this attribute.ro JnxBgpM2Identifier .1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.1.1.1 |
jnxBgpM2PathAttrClusterTableThe BGP-4 Path Attribute Cluster Table
contains the per network path (NLRI)
data on the reflection path which a
route has traversed. The absence of row
data for a given index value for jnxBgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable). SEQUENCE OF JnxBgpM2PathAttrClusterEntry .1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.2 |
jnxBgpM2PathAttrClusterEntryInformation about a cluster traversal
provided with a path to a network. JnxBgpM2PathAttrClusterEntry .1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.2.1 |
jnxBgpM2PathAttrClusterIndexAn integral index for a row in this table.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.2.1.1 |
jnxBgpM2PathAttrClusterValueA four octet long value representing a part of the
reflection path that the route has passed. Each such four
octet long value represents the ID of a cluster that
the route has traversed. The sequence of this path as
received in the route advertisement will be preserved in
the sequence of jnxBgpM2PathAttrClusterTable rows (and the
jnxBgpM2PathAttrClusterValues in each row) as returned for
a given jnxBgpM2PathAttrIndex value, and the monotonically
increasing sequence of jnxBgpM2PathAttrClusterIndex values
for that jnxBgpM2PathAttrIndex.ro JnxBgpM2Identifier .1.3.6.1.4.1.2636.5.1.1.3.8.1.2796.2.1.2 |
jnxBgpM2PathAttrExtCommTableThe BGP-4 Path Attribute Community Table
contains the per network path (NLRI)
data on the extended community membership advertised
with a route. The absence of row
data for a given index value for jnxBgpM2PathAttrIndex
indicates a lack of this attribute information
for the indicated network path (as indexed by
that jnxBgpM2PathAttrIndex value in the jnxBgpM2PathAttrTable).
XXX JMH - can not assign the OID until an RFC is published. SEQUENCE OF JnxBgpM2PathAttrExtCommEntry .1.3.6.1.4.1.2636.5.1.1.3.8.1.65001 |
jnxBgpM2PathAttrExtCommEntryInformation about an extended community association
provided with a path to a network. JnxBgpM2PathAttrExtCommEntry .1.3.6.1.4.1.2636.5.1.1.3.8.1.65001.1 |
jnxBgpM2PathAttrExtCommIndexAn integral index for a row in this table.ro Unsigned32 .1.3.6.1.4.1.2636.5.1.1.3.8.1.65001.1.1 |
jnxBgpM2PathAttrExtCommValueA value representing an extended community which was
received with the route implied by the jnxBgpM2PathAttr
Index value of this row data. There are certain
8-octet long values which could be returned in this
columnar row data that carry additional semantics.ro JnxBgpM2ExtendedCommunity .1.3.6.1.4.1.2636.5.1.1.3.8.1.65001.1.2 |
jnxBgpM2PathAttrCapExts OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.3.8.2 |
jnxBgpM2Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.4 |
jnxBgpM2MIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.4.1 |
jnxBgpM2MIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.1.1.4.2 |