BAY-STACK-STORM-CONTROL-MIB
AI MIB Summary
The BAY-STACK-STORM-CONTROL-MIB enables SNMP-based configuration and monitoring of broadcast, multicast, and unicast storm control thresholds on BayStack network interfaces. It facilitates the enforcement of traffic suppression policies to prevent LAN disruption caused by excessive packet storms by exposing interface-specific storm control state and limit parameters.
This MIB module is used for Storm Control configuration. The Storm Control feature prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on an interface.
Main OID:
bayStackStormControlMib.bayStackMibs.42
26
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
26 total| Object Name |
|---|
bayStackStormControlMibThis MIB module is used for Storm Control configuration.
The Storm Control feature prevents traffic on a LAN from being disrupted
by a broadcast, multicast, or unicast storm on an interface. MODULE-IDENTITY .bayStackMibs.42 |
IMPORTSThis MIB module is used for Storm Control configuration.
The Storm Control feature prevents traffic on a LAN from being disrupted
by a broadcast, multicast, or unicast storm on an interface. Unknown .bayStackMibs.42 |
bsStormControlNotifications OBJECT IDENTIFIER .bayStackMibs.42.0 |
bsStormControlBelowLowWatermarkThis notification is generated when the storm control packet type
rate falls below the low watermark after having risen above the
high watermark. It is generated only once when this occurs. NOTIFICATION-TYPE .bayStackMibs.42.0.1 |
bsStormControlAboveHighWatermarkThis notification is generated periodically as long as the storm
control packet type rate remains above the high watermark. NOTIFICATION-TYPE .bayStackMibs.42.0.2 |
bsStormControlObjects OBJECT IDENTIFIER .bayStackMibs.42.1 |
bsStormControlScalars OBJECT IDENTIFIER .bayStackMibs.42.1.1 |
bsStormControlPollValueThe polled value when a notification is generated.ro Unsigned32 .bayStackMibs.42.1.1.1 |
bsStormControlTableThis table is used to configure storm control global settings. SEQUENCE OF BsStormControlEntry .bayStackMibs.42.1.2 |
bsStormControlEntryAn entry containing objects for controlling storm control settings. BsStormControlEntry .bayStackMibs.42.1.2.1 |
bsStormControlTrafficTypeStorm control traffic type. Enumeration .bayStackMibs.42.1.2.1.1 |
bsStormControlEnabledIndicates whether storm control is enabled for this instance.rw TruthValue (SNMPv2-TC) .bayStackMibs.42.1.2.1.2 |
bsStormControlLowWatermarkLow watermark for storm control of this instance. If the rate drops below
this value after having risen above the high watermark, a single
notification will be generated.rw Unsigned32 .bayStackMibs.42.1.2.1.3 |
bsStormControlHighWatermarkHigh watermark for storm control of this instance. If the rate rises above
this value, notifications will be generated at the rate give by the
bsStormControlTrapInterval object.rw Unsigned32 .bayStackMibs.42.1.2.1.4 |
bsStormControlPollIntervalThe polling interval for checking the packet rate for storm control
of this instance.rw TimeInterval .bayStackMibs.42.1.2.1.5 |
bsStormControlTrapIntervalThe rate for sending storm control notifications, measured in a number of polling intervals.rw Integer32 .bayStackMibs.42.1.2.1.6 |
bsStormControlActionTypeStorm control action type for this instance.rw Enumeration .bayStackMibs.42.1.2.1.7 |
bsStormControlIfTableThis table is used to control storm control settings per-interface. SEQUENCE OF BsStormControlIfEntry .bayStackMibs.42.1.3 |
bsStormControlIfEntryAn entry containing objects for controlling storm control settings
for an interface. BsStormControlIfEntry .bayStackMibs.42.1.3.1 |
bsStormControlIfIndexThe ifIndex value of the interface. InterfaceIndex (IF-MIB) .bayStackMibs.42.1.3.1.1 |
bsStormControlIfEnabledIndicates whether storm control is enabled for this instance.rw TruthValue (SNMPv2-TC) .bayStackMibs.42.1.3.1.2 |
bsStormControlIfLowWatermarkLow watermark for storm control of this instance. If the rate drops below
this value after having risen above the high watermark, a single
notification will be generated.rw Unsigned32 .bayStackMibs.42.1.3.1.3 |
bsStormControlIfHighWatermarkHigh watermark for storm control of this instance. If the rate rises above
this value, notifications will be generated at the rate give by the
bsStormControlTrapInterval object.rw Unsigned32 .bayStackMibs.42.1.3.1.4 |
bsStormControlIfPollIntervalThe polling interval for checking the packet rate for storm control
of this instance.rw TimeInterval .bayStackMibs.42.1.3.1.5 |
bsStormControlIfTrapIntervalThe rate for sending storm control notifications.rw Integer32 .bayStackMibs.42.1.3.1.6 |
bsStormControlIfActionTypeStorm control action type for this instance.rw Enumeration .bayStackMibs.42.1.3.1.7 |